LAC5900RIN_6900RIN.DG_ENG_MFL60361502

ENGLISH

DEUTSCH

LAC5900RIN / LAC6900RIN

FRANAIS

ESPAOL

ITALIANO

NEDERLANDS

Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

SLOVENIAN

Table of Contents
Safety Note [LAC5900RIN] Front Panel / Remote Control [LAC6900RIN] Front Panel / Remote Control [LAC5900RIN] About Detachable Control Panel [LAC6900RIN] About Detachable Control Panel Installation Basic installation Removing the existing receiver unit ISO-DIN installation Battery installation Connection Basic operation Mute Using the EQ Adjusting the sound level XDSS+(Extreme Dynamic Sound System) Checking the clock Setting the clock Listening to a CD Pause or restart a CD Search for a section within a track / file Skip to another track / file Intro scan Repeat Shuffle MP3/WMA Track -10 / +10 MP3/WMA Folder UP/DOWN Checking information about your music
Listening to the radio Auto search memory Storing and recalling broadcast frequencies To scan the preset stations To tune in the preset stations Listening RDS broadcasting Connecting USB device Listening to music by connecting iPod Pause or restart playback Shuffle Repeat Checking music menus Checking information about your music Changing iPod settings Connecting an Auxiliary Equipment Changing settings Troubleshooting Specifications Compatible iPod models
This product is manufactured to comply with Directive 2006/28/EEC(ANNEX I , 3.2.9), 72/245/EEC, and 2006/95/EC.
European representative : LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-036-547-8940)
The unit is compatible with the steering wheel remote control. The function allows operation by sending the steering wheel remote control signal to the unit. For details, consult with your dealer.

CAR CD/MP3/WMA Receiver

Safety Note

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a safe and legal manner before attempting such operations. Do not use for many hours at extremely low or high temperature. (-10~60C) To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. The temperature of units outside can be extremely high, please use the unit after proper installation in your vehicle. This unit cannot play 8cm disc (use 12cm disc only).

Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Caution When being connected in a wrong way, the unit displays as follows. - Antenna port short : ANTENNA ON PORT SHORT CIRCUIT CHECK
After connecting it again, restart the unit. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/Live File System : Disc format system for Windows Vista)
[LAC5900RIN] Front Panel / Remote Control
SOURCE [SRC] U Auto Store [U/AS] u Preset Scan [u/PS] u MP3/WMA Track +10/-10 U/u u Folder Up/Down U/u [ENTER] Skip / Search / Seek / Tune -?b / B?+ Volume [MUTE] Power [PWR] Equalizer [EQ] Extreme Dynamic Sound System [XDSS+] Select [SEL] Remote Sensor(Optional) CD slot
9 Display window 10 Traffic Announcement[TA] Programme Type[PTY] 11 Display [DISP] 12 Eject 13 Release 14 USB slot 15 AUX in 16 Preset Station [1~6] 17 Shuffle [SHF] 18 Repeat [RPT] 19 Intro Scan [INT] 20 Play/Pause B/X 21 [BAND] [DRIVE] iPod MENU 22 [MENU]
Power [POWER] / Mute Select [MENU/SEL] Source [SRC] Play / Pause B/X Intro Scan [INT] Shuffle [SHF] MP3/WMA Track +10 Folder Up U Auto Store CD Skip / Search Seek / Tune ?m m
[BAND] DRIVE [DRV] iPod MENU Volume Up / Down Number [#] Repeat [RPT] Number [0 -9] CD Skip / Search Seek / Tune M M? [ENTER] Display [DISP.] MP3/WMA Track -10 Folder Down u Preset Scan
[LAC6900RIN] Front Panel / Remote Control
U Auto Store [U/AS] u Preset Scan [u/PS] u MP3/WMA Track +10/-10 U/u u Folder Up/Down U/u [ENTER] Skip / Search / Seek / Tune -?b / B?+ Volume [MUTE] Power [PWR] Equalizer [EQ] Extreme Dynamic Sound System [XDSS+] Select [SEL] SOURCE [SRC] Remote Sensor(Optional) Display window

Traffic Announcement[TA] Programme Type[PTY] Display [DISP] Release USB slot AUX in Preset Station [1~6] Shuffle [SHF] Repeat [RPT] Intro Scan [INT] Play/Pause B/X [BAND] [DRIVE] iPod MENU [MENU]
[LAC5900RIN] About Detachable Control Panel
Attaching the control panel
Align the left side of the panel with the stopper. Push the right side or panel into the unit until it clicks.
Detaching the control panel
Press the (RELEASE) to open the control panel. Hold the right part of the control panel. Pull out the control panel. Place the control panel in the supplied protective case.
Caution The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display.
Do not leave the control panel in any area exposed to high temperatures or direct sunlight. Do not drop the control panel or otherwise subject it to strong impact. Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel.
Control panel Protective Case
Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch.
[LAC6900RIN] About Detachable Control Panel

D B A C

Press the button to unlock the control panel. Push the control panel to left. Pull the control panel out of the unit. Put the detached control panel into the protective case.
Attach part A of the control panel to part B of the unit. Attach part C of the control panel to part D of the unit while pushing the control panel to left. Close the control panel.

Caution

When detaching or attaching the control panel, do not press the display or control buttons. The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the control panel. Do not leave the control panel in any area exposed to high temperatures or direct sunlight. Do not drop the control panel or otherwise subject it to strong impact. Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. Do not try to disassemble the control panel.

Installation

Basic Installation
Bend the claws according to the thickness of the dashboard

ISO-DIN Installation

Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve.

Control panel

Slide the unit into the ISO-DIN frame. Fit screws removed from the old unit. Slide the unit and frame into the dash opening. Install the dash panel or adapter plate. Install the trim ring to the unit. Install the control panel to the unit.

Battery Installation

Removing the existing receiver unit
If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. Remove the rear support from the unit. Remove the control panel and trim ring from the unit. Insert the lever A into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. 2 3
Pull out the battery holder with a sharp product like a ball point pen. Put the battery with and correctly on the battery holder. Push the battery holder back into its original position.
Note Use only one CR2025 (3V) lithium battery. Remove the battery if the remote control is not used for a long period of time. Do not leave the product in a hot or humid place. Do not handle the battery with metallic tools. Do not store the battery with metallic materials.

Connection

Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Wired remote input (Black): Hard-wired remote control adaptor can be connected (Not supplied/Optional). To Audio out To Audio in
Front Left Front Right Rear Left (Sub-woofer Left) Rear Right (Sub-woofer Right)

*Sub-woofer is optional.

Power Antenna

Control Relay

A8 A7 A2 A1 A5
Power Antenna(Blue) Dimmer(Pink) To Ignition(Red) To Battery(+)(Yellow) Ground(-)(Black)

BATTERY

Dimmer Switch Ignition Switch
B 1 B 2 B 3 B 4 B 5 B 6 B 7 B 8

B B B B B B B B

Violet / Black Stripe : Rear Right Violet : Rear Right + Gray / Black Stripe : Front Right Gray : Front Right + Green/ Black Stripe : Rear Left Green : Rear Left + White/Black Stripe : Front Left White : Front Left +
Remote On(Blue/White) Phone Mute(Orange)

Amplifier (Optional)

: Not connected
CAR CD/MP3/WMA Receiver 9

Basic Operation

ON PLAYER 1. Turn the unit on. 2. Select a source. 3. Adjust the volume. PWR SRC Rotate PWR ON REMOTE POWER SRC VOLUME
Adjusting the sound level
Press SEL (SEL/MENU on the remote control) repeatedly to select the mode you want to adjust from VOL(volume), BAL(left/right speaker), FAD(front/rear speaker) and SUB(Sub-woofer:optional). To adjust sound quality, rotate PWR or on the remote control. press VOLUME
Note When EQ and XDSS+ is set to Off, you can also adjust the sound level (BAS(bass), MID(middle), TRB(treble)) settings.
Basic operation - more you can do
Press VOL/MUTE (POWER cel it, press again. on the remote control) to cut the sound. To can-
XDSS+ (Extreme Dynamic Sound System)
Press and hold EQ/XDSS+. (XDSS+ : Improves the treble, bass sound.) To cancel it, press and hold again.

Checking the clock

You can see the clock pressing DISP (DISP. on the remote control).

Using the EQ

EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ/XDSS+ repeatedly. The indicator lights up in the following order. POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t REGGAE t RUSSY t USER1 t USER2 t Off(not displayed)

Setting the clock

When RDS CT information is not received and then you set CT on the setting menu to OFF, you can adjust the time by yourself. Refer to the page 14 for setting the CT(Clock Time) ON/OFF. 1 Press the DISP(DISP. on the remote control) and then, press and hold it for more 1 second. 2 Press the B?+(BB> on the remote control) to adjust the hour. 3 Press the -?b (.bb on the remote control) to adjust the minute. 4 Press DISP(DISP. on the remote control) again to finish the setting.

Note When XDSS+ is set to Off, you can adjust the EQ settings.
You can adjust sound level to your preference. Once you select a USER mode and then adjust the sound level, it will be automatically stored for the currently selected USER mode. Refer to the Adjusting the sound level for USER 1/2 mode.

Listening to a CD

ON PLAYER 1. Open the front panel.

[Only in LAC6900RIN]

Shuffle ON REMOTE VOLUME
Press or press and hold SHF on the player (SHF on the remote control). Each files in the current selected folder ( SHF) or all of the tracks/files (SHF) on the disc is played randomly. Press SHF again to cancel it.
2. Insert a CD. 3. Adjust the volume.

Rotate PWR

Note During random playback, if you press -?b , you wont go back to the previous track.

MP3/WMA Track -10 / +10

Listening to a CD - more you can do

Pause or restart a CD

Press B[] on the player (B/[] on the remote control) during playback. Press this B button again to resume play.
(If there is no folder or one folder.) During playback push the button down to u/PS to go back 10 tracks, or push it up to U/AS to go forward 10 tracks.

MP3/WMA Folder UP/DOWN

(If there are more than two folders.) During playback, push the button down to u/PS to go back to the previous folder, or push it up U/AS to go forward to the next folder. Checking information about your music MP3/WMA files often come with tags. The tag gives the Title, Artist or Album. Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no information, NO TEXT will be shown in the display window. Note : The icon is displayed during MP3/WMA playback. MP3/WMA Disc compatibility with this unit is limited as follows: 1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA) 2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA) 3. CD-R/CD-RW file system should be ISO 9660 4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example Direct-CD etc., it will not be possible to playback MP3/WMA files. We recommend that you use Easy-CD Creator which creates an ISO9660 file system. Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
Search for a section within a track / file
Press and hold -?b / B?+ on the player (.bb/BB> on remote control) for about 1 second during playback and then release at the point you want.
Skip to another track / file
Press -?b / B?+ on the player (.bb/BB> on remote control.). To skip to previous track, press briefly -?b within 3 seconds of playing time. Press [#] and
a number you want to move on remote control to move the files/track. Intro scan

Press or press and hold INT on the player (INT on remote control). Each files in the current selected folder ( INT) or the first 10 seconds of each tracks/files (INT) on the disc are played. To cancel it, press the button again.

Repeat

Press or press and hold RPT on the player (RPT on the remote control). The current selected tracks/files (1 RPT) or folder ( RPT) on the disc is played repeatedly. To cancel it, press the button again.

Listening to the radio

ON PLAYER 1. Select a source to tuner. 2. Select a band. 3. Auto seek. Manual seek. SRC BAND -?b / B?+ Press and hold -?b / B?+ ON REMOTE SRC 3 / BAND ?mm/MM? Press and hold ?mm/MM?
Listening RDS broadcasting
ON PLAYER 1. Select a source to tuner. 2. Select a band to FM. 3. Select a programme types. 4. Select a station in PTY type. SRC BAND Press and hold TA/PTY 1- 6 ON REMOTE SRC BAND 1-6
Listening to the radio - more you can do

Auto search memory

Push the button up to U/AS. The six strongest broadcast frequencies will be stored under preset button 1-6 in the order of their signal strength.To cancel, push the button up to U/AS.
RDS broadcasting information. Press and hold the TA/PTY repeatedly for selecting each mode.
Music group t Speech Group t Search off NO. MUSIC GROUP 1. 2. 3. 4. 5. 6. POP M, ROCK M EASY M, LIGHT M. CLASSICS, OTHER M JAZZ, COUNTRY NATION M, OLDIES FOLK M NO. SPEECH GROUP 1. NEWS, AFFAIRS, INFO 2. SPORT, EDUCATE, DRAMA 3. CULTURE, SCIENCE, VARIED 4. WEATHER, FINANCE, CHILDREN 5. SOCIAL, RELIGION, PHONE IN 6. TRAVEL, LEISURE, DOCUMENT
Storing and recalling broadcast frequencies
1 Press BAND to select desired band you want to store. 2 Select the desired frequency and press one of preset buttons 1-6 and hold until the beep sound. 3 Repeat steps 1-2 to preset other stations.The next time, you press the same preset button, the radio station frequency is recalled from the memory.

Connecting USB device

ON PLAYER 1. Open the USB cover. 2. Connect the USB device. 3. Adjust the volume. Moving to another drive
When connecting this unit to multi reader, press BAND (BAND/DRV on remote control) to go to the next drive. Each time you press the button, the driver modes changes.

ON REMOTE VOLUME

To scan the preset stations
Push the button down to u/PS. Each preset station appears. To cancel, push the button down to u/PS.
To tune in the preset stations
Press BAND to select the desired band and press the desired preset button 1-6 (preset button 1-6 on the remote control). Note When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased.

Note If the USB device is already connected, press SRC (SRC on remote control.) to select a source to USB. Pause / Intro Scan / Repeat / Shuffle /. functions are same with Listening to a CD - more you can do. Refer to the page 11.
Listening to music by connecting iPod
You can enjoy iPod-stored music on the unit by connecting it to the USB connector using the appropriate cable.
Press RPT on the player (RPT on the remote control). The current selected tracks/files (1 RPT) on the iPod is played repeatedly. To cancel it, press the button again.
Note During playback, if you press -?b/B?+ , you wont go back to the previous or next track.

Checking music menus

1 Press iPod MENU/BAND (BAND/DRV/iPod MENU on remote control) once to move to the music menu display mode. Uu 2 Push the button up to U/AS or down to u/PS(U/u on remote control) to select a music menu list. Then, the menu display modes change as follows. (PLAYLISTS t ARTISTS t ALBUMS t GENRES t SONGS t COMPOSER t AUDIO BOOK t PODCAST) 3 Press B?+(BB> on remote control) to confirm the music menu. Uu 4 Push the button up to U/AS or down to u/PS(U/u on remote control) to select a file and press B?+(BB> on remote control) to confirm it. - Press -?b(.bb on remote control) to return to the previous menu. Checking information about your music
Not Supplied ON PLAYER Rotate PWR ON REMOTE VOLUME
1. Open the USB cover. 2. Connect the iPod. 3. Adjust the volume.
Note If the iPod is already connected, press SRC (SRC on remote control.) to select a source to USB. Refer to the page 16 to check the compatible iPod model for this unit. Repeat, Shuffle, Checking music information functions are only in track number display mode.
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album. Press DISP repeatedly during MP3/WMA file playback. If there is no information, NO TEXT will be shown in the display window. Changing iPod settings 1 Press iPod MENU/BAND (BAND/DRV/iPod MENU on remote control) twice and then B?+(BB> on remote control) to change iPod settings. Uu 2 Push the button up to U/AS or down to u/PS(U/u on remote control) to select a setting item. Then the setting items change as follows. (REPEAT <-> SHUFFLE <-> BOOK SPEED) 3 Press B?+(BB> on remote control) to confirm the item. Uu 4 Push the button up to U/AS or down to u/PS(U/u on remote control) to adjust values and press B?+(BB> on remote control) to confirm it. - Press -?b(.bb on remote control) to return to the previous menu.

Listening to music by connecting iPod - more you can do
Pause or restart playback

Shuffle

Press or press and hold SHF on the player (SHF on the remote control). Each files in the current selected folder ( SHF) or all of the tracks/files (SHF) on the iPod are played randomly. Press SHF again to cancel it.
- The setting values are as follows.
REPEAT (RPT ALL <-> RPT 1 <-> RPT OFF) SHUFFLE (SHF OFF <-> SHF ALBUM <-> SHF ALL) BOOK SPEED (Audio book speed: SLOWER <-> NORMAL <-> FASTER)
Connecting an Auxiliary Equipment
1. Connect an auxiliary equipment to the AUX jack with line input cable. 2. Select a source to AUX. 3. Play the connected Auxiliary Equipment. 4. Adjust the volume. ON PLAYER ON REMOTE -

SRC Rotate PWR

SRC VOLUME

Changing settings

ON PLAYER 1. Select one item. 2. Select a source. 3. Finish the setting. Press

ON REMOTE Press and hold

SEL/MENU

Rotate PWR Press MENU

VOLUME Press SEL/MENU
AF(Alternative frequency) ON / OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received.) TA(Traffic Announcement) ALARM / SEEK TA ALARM : When the tuned station has no TP information for 5 seconds, a double beep sound is output. TA SEEK : When the tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station that has the TP information.
14 CAR CD/MP3/WMA Receiver
PI (Programme Identification) SOUND / MUTE PI SOUND : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound after 1 second. PI MUTE : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound right now. C-T(Clock Time) ON/OFF You can use the RDS CT information to update the time. When RDS CT information is not received and then you set CT to OFF, you can adjust the time by yourself. Refer to the page 10 for setting the clock. AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX (Auxiliary) 00dB / +6dB Only when you set AUX to ON as switching sources, you can adjust the volume level of each source to prevent radical changes in volume. You can set to 0 dB or +6 dB. You may be surprised at a loud sound when you change the source from the external component to another source. DEMO OFF/ ON You can change the initial indication on the display to information name (function name, EQ name, etc.) while listening to a source. LCD WHI / RED You can change the LCD window color. WHI(white) <-> RED(red) [LAC5900RIN] LED RED / GRN / AUTO [LAC6900RIN] LED BLU / RED / AUTO: You can change the button color. COL TM (Color changing time) Only when you set LED to AUTO, you can set LED color changing time from 5 to 60 seconds. SW(Subwoofer) OFF / SW 55HZ / SW 85HZ / SW 120 HZ You can enable the subwoofer. SW OFF <-> SW 55HZ <-> SW 85HZ <-> SW 120 HZ. DIM(Dimmer) OFF / ON / AUTO You can change the brightness of the display window during the power-on status. When you set DIMMER to AUTO, the dimmer operates according to the car dimmer setting. DIM L (Dimmer Level) When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2) A-EQ(Auto EQ) ON/OFF AUTO EQ operates only in the music file supported with Genre in the device. When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre. BEEP 2ND / ALL BEEP 2ND : The beep is generated when a key is long pressed. (1 sec) BEEP ALL : The beep is generated when any key is pressed.

Troubleshooting

Symptom Cause Correction

General

Power doesnt turn on / The unit doesnt operate.
Leads and connectors are not properly. The fuse is blown.
Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. Theres audio skipping. This unit is not firmly secured. The playback is not possi The disc is dirty. ble. The loaded disc is of a type this unit cannot play. The signal strength of the stations is too Radio stations cannot be weak(when tuning in with automatic tuning.) tuned in. No station has been preset or preset stations have been cleared(when tuning by scanning preset stations.)
Confirm once more that all connections are correct. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Turn the unit off and then on. Connect the cables correctly. Secure this unit firmly. Clean the disc. Check what type the disc. Tune in the stations manually. Preset the stations.(Refer to the page 12)

iPod Remote control

iPod does not work.
Check whether the player is connected to the unit correctly.
Connect it to the unit correctly. Load new battery.
Battery power is low. The unit does not operate correctly even when the appropriate remote control buttons are pressed.

Specifications

General Output Power Power Source Speaker impedance Ground System Dimensions (W x H x D) Net Weight Tuner FM Frequency Range S/N Ratio Distortion Usable Sensitivity AM (MW) Frequency Range S/N Ratio Distortion Usable Sensitivity CD Frequency Response S/N Ratio Distortion Channel Separation (1kHz) AUX Frequency Response S/N Ratio Distortion Channel Separation (1kHz) Max Input Level (1kHz) USB Version Line OUT Frequency Response Output Voltage Subwoofer (optional) Frequency Response Output Voltage 53W x 4CH (Max.) DC 12V 4 Negative 180 x 50 x 176 mm (Without Control Panel) 1.3 kg

Compatible iPod models

iPod iPod iPod iPod iPod iPod
touch classic with video (5th generation) nano (1st generation) nano (2nd generation) nano (3rd generation)
87.5-107.9, 87.5-108 MHz 55 dB 0.7% 12 dBV 520-1720 or 522-1620 kHz 50 dB 1.0% 28 dBV 20 Hz-20 kHz 80 dB 0.12% 55 dB 20 Hz-20 kHz 80 dB 0.1 % 45 dB 1.1V USB 1.1 20Hz ~ 20 KHz 1.8 V (Max.) 20Hz ~ 120 Hz 1.8 V (Max.)

Designs and specifications are subject to change without notice.

P/NO : MFL 60361502

16 CAR CD/MP3/WMA Receiver