Denver Colorado 80203 CO http://www.centralmasshomewarranty.com Dishwasher Manuals LG Dishwasher Manuals 2-drawer Dishwasher, Automatic Dishwasher, Built-in Dishwasher, Compact Dishwasher, Convertible Dishwasher LG Dishwasher Manuals
LG Dishwasher Owner's Manual LDF6810ST LG Dishwasher Manuals
http://www.centralmasshomewarranty.com
Problems with your home can happen when you least expect. The last thing a home owner may have is time, patience or savings for an unexpected, costly repair. A Central Mass Home Warranty can help cover replacement or repairs of electrical, plumbing, HVAC systems and appliances.
Dishwasher Manuals 2-drawer Dishwasher, Automatic Dishwasher, Built-in Dishwasher, Compact Dishwasher, Convertible Dishwasher LG Dishwasher Owner's Manual LDF6810ST LG Dishwasher Manuals

DISHWASHER SERVICE MANUAL
BEFORE SERVICING THE UNIT, PLEASE READ THIS MANUAL CAREFULLY FOR SAFETY AND CORRECT SERVICES.
MODEL : LDF6810WW / MODEL : LDF7810WW / MODEL : LDF7811WW / LDS5811WW /
LDF6810BB LDF7810BB LDF7811BB LDS5811BB

/ / / /

LDF6810ST LDF7810ST LDF7811ST LDS5811ST

CONTENTS

1. CAUTION.... 4 2. SPECIFICATIONS.... 5 3. WIRING DIAGRAM.... 6 4. FEATURES & TECHNICAL EXPLANATION.. 7 5. PARTS NAME.... 16 6. PROGRAM CHART.... 19 7. HOW TO DISASSEMBLE.... 21 8. TROUBLE SHOOTING METHODS... 30 A. TROUBLE SHOOTING ACCORDING TO DISPLAYED ERROR MESSAGE.30 B. TROUBLE DIAGNOSES AND REPAIR BY SYMPTOM.. 32 9. INSTALLATION INSTRUCTION... 36 10. EXPLODED VIEW...43 11. REPLACEMENT PART LIST...52

CAUTION !

DISCONNECT POWER CORD BEFORE SERVICING RECONNECT ALL GROUNDING DEVICES
IMPORTANT SAFETY NOTICE !
This service information is intended for individuals possessing adequate backgrounds of electrical, electronic and mechanical experience. Any attempt to repair this appliance may result in personal injury and property damage. The manufacturer or seller can not be responsible for the interpretation of this information, nor can it assume any liability in connection with its use.

2. SPECIFICATION

ITEM Rated Voltage / Frequency Installation Place Settings Product Dimension(in) Product Weight(lbs) Door Color Tub Material Control Rated Power(Watt) Heater Power(Watt) Programs Upper Rack Position Lower Rack Water Consumption Power Consumption(kWh/year) Operating Time (min) Fan Dry System Delay Start Function Auto-Off Power Switch Process Monitor Wash Level Racks Operating Water Pressure (Bar) SPECIFICATION AC 120V/60Hz Built-In 7/8 x 25 x 33 7/8 7811/ 7810 series : 115lbs, 5811/ 6810 series : 110lbs White, Black, Stainless Stainless Steel Electronic 1,350 1,200 7811/ 7810 series : 6, 6810 series : 5 7811/ 7810 series : Adjustable, 5811/ 6810 series : manual 50% Fold down 21-30 (Normal) 352~370 101-135 (Normal) Yes Yes Yes Yes 5 Nylon Coating 20-120 (140-830kPa)

3. WIRING DIAGRAM

4. FEATURES & TECHNICAL EXPLANATION

4-1. Product Features

Ultra Big Capacity
If you raise the Upper Rack, you can load large dishes in the Lower Rack. (Max. 14 in.) The tall tub provides large dishes loading as well as large capacity. LG dishwashers let you load oversized items in the Lower and Upper Rack.
Slim Direct Inverter Motor
Newly introduced Slim Direct Inverter motor is inverter-controlled. Speed is controlled based on program selection. It also offers high energy efficiency to minimize energy loss.

Hybrid Drying System

Dry Air Moist Air
This is one of the best performance solutions for drying dishes because it minimizes venting humid air to the outside of the dishwasher. In addition, this system ensures better drying results compared to the condensing drying system.

Mixed Air

Vario Spray System

to Upper Arm

Because of alternating water spray between the Upper and Lower Rack, the water pressure allows superior performance and reduced consumption of water and electricity.

to Lower Arm

Self Cleaning Filter

Soil Sensor

to Drain
For best wash results, the self-cleaning filter system continuously cleans the water as it circulates. Your LG dishwasher has a self-cleaning filter that grinds food into small particles before it goes down the drain.

Fine Mesh

4-2. Display Panel 4-2-1. LDF 7811/7810 Series
Control panel may vary on some models.

PROGRAM

Press the program that corresponds to your desired wash cycle.

INDICATOR

Child lock: Lamp will turn on when Child Lock setting is on. Rinse Aid: Refill with Rinse aid when Lamp turns on.
Soak Power Scrub Normal Delicate Quick Wash Rinse Only
This program is for very heavily soiled loads including pots, pans and casserole dishes which may have dry food residue. This program is for very heavily soiled loads This program is for normally soiled everyday loads. This program is for washing delicate items like glasses. This program is for that quick wash of lightly soiled recently used dishes and cutlery. This program is for very lightly soiled loads.

CANCEL

To cancel a running program, open the door, then press and hold the Normal and Delicate buttons for 3 seconds.

SPRAY (INTENSITY)

Repeated pressing of the Spray button will select Strong, Medium or Soft.

DELAY START

If you want to delay the start of a selected program, press the Delay Start button. Each press of Delay Start will delay the start of the cycle by one hour. The delay start time can be adjusted from 1 to 24 hours in one-hour increment.
For operating, press this button first for power on. After operating, the power automatically switches off for safety and economy. In case of an unusual Power surge or disturbance, the power may be automatically turned off for safety.

CHILD LOCK

Lock the control buttons to prevent the settings from being changed. To lock/unlock, press Spray and Rinse buttons simultaneously for 3 seconds with door open.

SANITARY/ EXTRA RINSE

Repeated pressing of the Rinse button will select Sanitary, Extra Rinse or both. If you select the Sanitary function, the temperature of Heating Rinse can reach 161 (72 ). When you select Extra Rinse, an additional rinse cycle is added.

HALF LOAD

In case of a small load, use the upper or lower rack only to save energy. Each press of the Half Load button cycles between upper rack only and lower rack only. If you don't press Half Load, the dishwasher runs normally, i.e, operation of upper and lower spray arm alternating periodically.

4-2-2. LDF 5811 Series

Lock the control buttons to prevent the settings from being changed. To lock/unlock, press Spray and Rinse buttons simultaneously for 3 seconds.

- 10 -

PROCESSING INDICATOR
Current program phase is indicated.

TIME LEFT

Before starting, the display window shows the running time of the selected program. After starting, the display window shows the remaining time. If the dishwasher has a trouble, the trouble type is displayed.
If you want to delay the start of a selected program, press the Delay Start button. Each press of Delay Start will delay the start of the cycle by one hour. The delay start time can be adjusted from 1 to 12 hours in one-hour increment.
To cancel a running program, press and hold the Normal and Delicate buttons for 3 seconds.

- 11 -

4-2-3. LDF 6810 Series
Power Scrub Normal Delicate Rinse Only Upper Only
This program is for very heavily soiled loads This program is for normally soiled everyday loads. This program is for washing delicate items like glasses. This program is for very lightly soiled loads. This program is to wash some items loaded on the upper rack.

To cancel a running program, open the door, then press and hold the Power Scrub and Normal buttons for 3 seconds.

- 12 -

Lock the control buttons to prevent the settings from being changed. To lock/unlock, press Delicate and Rinse Only buttons simultaneously for 3 seconds with door open.

- 13 -

4-3. TEST MODE 4-3-1. LDF 7811/7810 LDS 5811 Series

CHECK PROGRAM

BUTTON Rinse + Time Delay + POWER S/W Soak Power Scrub Normal Delicate Quick Wash Rinse Only Supply Rinse Half Load The number of Top Front Display pushing button Display 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 2 TIME 3 TIME 4 TIME 5 TIME 6 TIME Time Delay 7 TIME 8 TIME 9 TIME 10 TIME 11 TIME 12 TIME 13 TIME Normal Water Level : 315 Pure Water : more than 229 3H/U39 3A 3b 3c n : 3H/U:: : : : : : : : : 99 Soil Level n : 02 n : 03 Frequency n : 05 n : 06 n : 07 n : 08 Temp. ( ) n : 0A n : 0b n : 0c Thermistor Lower Nozzle (VARIO) Upper Nozzle (VARIO) Wash-DrainWater Supply Auto-Off Load and Checking points All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting Strong/Medium/Soft Sanitary-Extra Rinse Upper-Lower Soil Sensor Wash Pump Drain Pump Inlet Valve Dispenser Heater (for 10 sec) Fan Delay Start Child Lock + Rinse Aid Wash Rinse Dry Wash-Rinse-Dry Strong-Soft Sanitary-Extra Upper-Lower Soak-Normal Delicate-Rinse Only Rinse Aid Both Closed Closed Closed Closed Door open/ closed Both Both Both Both Both Both Both Both Both Both Both Closed Closed Both Closed Closed Closed
Supply water before operating the Test Mode.

- 14 -

4-3-2. LDF 6810 Series
BUTTON Upper Only + Time Delay + POWER Power Scrub Normal Delicate Rinse Only Upper Only Rinse Time Delay The number of pushing button 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 1 TIME 2 TIME 3 TIME 4 TIME 5 TIME 6 TIME 7 TIME 8 TIME 9 TIME 10 TIME 11 TIME 12 TIME 13 TIME Normal Water Level : 295 Top Display 3H/U3A 3b 3c Thermistor Lower Nozzle (VARIO) Upper Nozzle (VARIO) Wash-DrainWater Supply Auto-Off Wash Pump Drain Pump Inlet Valve Dispenser Heater (for 10 sec) Fan Child Lock + Rinse Aid Sanitary-Extra Power Scrub + Normal + Delicate Rinse Only + Upper Only Rinse Aid Both Closed Closed Closed Closed Load and Checking points Door open/ closed Both Both Both Both Both Both Both All LEDs are lighting Both Both Both Closed Both Closed Closed Closed Closed
All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting All LEDs are lighting

- 15 -

5. PARTS NAME
5-1. LDF 7811/7810 Series
Control Panel Front Display Door Handle Front Cover Lower Cover Leveling Foot Side Cabinet Base Top Spray Arm Upper Spray Arm

Removable Tines Lower Spray Arm Detergent & Rinse Aid Dispenser Vapor Vent Cover Upper Rack Cutlery Basket Lower Rack Top Display Power Button

INSTALL BRACKET

WOOD SCREW
The appearance and specifications may be varied without notice according to localities.

- 16 -

5-2. LDF 5811 Series
Control Panel Front Display Door Handle Power Button Front Cover Lower Cover Leveling Foot Side Cabinet Base
Top Spray Arm Upper Spray Arm Removable Tines Lower Spray Arm Detergent & Rinse Aid Dispenser Vapor Vent Cover Upper Rack Cutlery Basket Lower Rack

- 17 -

5-3. LDF 6810 Series
Control Panel Door Handle Front Cover Lower Cover Leveling Foot Side Cabinet Base Top Spray Arm Upper Spray Arm
Lower Spray Arm Detergent & Rinse Aid Dispenser Vapor Vent Cover Upper Rack Cutlery Basket Lower Rack Top Display Power Button

- 18 -

6. PROGRAM CHART(SCHEMATIC DIAGRAM)
6-1. LDF 7811/7810 LDS 5811 Series
W/Motor Drain Pump Inlet Valve Heater Vario Motor Fan Motor Dispenser Thermal Act Auto Off S/W

Rinse Only

Delicate

NORMAL

Power Scrub
Drain Stop Drain Wash Drain Wash Drain Drain Drain Wash Drain Wash Drain Drain Drain Wash Drain Wash Drain Drain Drain Wash Drain Wash Drain Drain Drain Wash Drain Drain Drain Wash Drain Drain Drain Stop Drain

Water Supply Wash Stop

Water Supply Water Supply Wash Stop
Water Supply Water Supply Rinse Stop
Water Supply Water Supply Heating A Heating B Stop
Program Pre Wash 1 Pre Wash 2 Wash Pre Wash 3
Drain A Drain B Drain B Drain B Drain B Drain C Drain C Drain D

Program chart

Main Wash Rinse 1 Rinse Rinse 2 Heating Rinse Dry Dry

- 19 -

Dry Drain

6-2. LDF 6810 Series

Drain Stop 26 Drain Wash Drain Wash Drain Drain Drain Wash Drain Wash Drain Drain Drain Wash Drain Wash Drain Drain Drain Wash Drain Wash Drain Drain Drain Wash Drain Drain Drain Wash Drain Drain Drain Stop Drain

- 20 -

7. HOW TO DISASSEMBLE
BEFORE DISASSEMBLING THE DISHWASHER ;
1) Remove the cord from electric outlet to avoid electric shock. 2) Close the Water Tap (faucet). 3) Remove all dishes and items in the dishwasher. 4) Remove the Lower Rack and the Upper Rack. 5) Remove the inlet hose and drain hose connetion to avoid the hose damages. 6) Prepare some towels to avoid floor wet by the water left in the dishwasher.

1) Remove the wiring connections. 2) Remove the Hose connections from Sump Assembly.
You can see the information of Wiring Diagram at the back of Lower Cover.

- 26 -

9. Cabinet Base

Cabinet Base

1) Remove 8 screws. 2) Lift it upward.

10. Inlet Valve

Cabinet Base Inlet Valve
1) You can disassemble the lnlet Valve by removing the 2 screws.

11. Air Braker Assembly

1) Disconnect the 3 hoses assembly. 2) Turn the Air Braker Nut counterclockwise. Be careful the o-ring should not be lost.

Air Braker Nut

Air Braker Assembly

- 27 -

Sump Holder

12. Sump Assembly

Remove 2 screws. Remove the Sump Holder and push the Sump Assembly down with pulling aside Hook. Be careful not to drop the Sump Assembly to the bottom.

Hook Sump Assembly

1) Heater & Drain Motor

Drain Pump

Pull the Heater out of the Sump after releasing the nut. Remove 3 screws.

Heater

2) Vario Motor & Soil Sensor Remove 2 screws for Vario Motor.

Vario Motor Soil Sensor

Pull the Vario Motor, Soil Sensor and Micro S/W.

Micro S/W

- 28 -
When you reassemble the Sump Assembly, be careful not to kink, tear and take off the seals.
13. Holder Supporter, Tub Packing and Hinge Supporter Assembly.
Rotate the screwdriver, after slide it into the gap between Stopper Roller and Rail Roller.
You must take off Stopper Roller(F117) by screwdriver to change the Rail Assembly. (Stopper Roller could be broken while you are taking off. So you should be careful not to be hurt and have extra stopper rollers ready at servicing at all times)

- 29 -

8.TROUBLE SHOOTING METHODS
A. TROUBLE SHOOTING ACCORDING TO DISPLAYED ERROR MESSAGE

ERROR MESSAGE

INLET ERROR
POSSIBLE CAUSE FOR ERROR OCCURRENCE
The Water Supply Tap is closed. The Water Supply is shut off. The Inlet Hose is kinked. The Water Pressure is very low. (below 10 psi) Inlet Valve is OK? The filter of Inlet Valve is clogged by impure water. The Hall sensor is OK? The Impeller of Air Guide is bound.

REMEDY

Take action on Water Supply device.

displayed Condition

Not reached to the normal water level in spite of 10 min. water supply
Measure the electric resistance of Inlet Valve. (950-1300 ) Clean the filter of Inlet Valve. Check the frequency of Inlet Water by the Test Mode. Replace the Air Braker. Remove the cause of kink or block. Check the wiring connection. Measure the electric resistance of Drain Motor. (20-40 the Circuit. ) Replace the Drain Motor or repair

Re-connect the wiring connections related to the Washing Motor.
The Blade is not locked by a small and sharp object?
Remove the cause of lock or replace the Blade.
Replace the Wahing Pump/Motor

- 33 -

Washing Results are not Satisfactory
After washing, are there still White deposits or streaks on the dishes?
YES Reduce the amount of Rinse-Aid (for Streak)
NO After washing, are there still food soils on the dishes?
Check that : - the amount of detergent Correctly used or not - Filters clogged or not. - the holes of spray arms blocked or not. - Utensils are correctly arranged or not. - Utensils are overloaded or not. - the spray arm rotating is obstructed or not. - the program is correctly selected or not.
Dry Results are not satisfactory
Increase the amount of Rinse-Aid.(Set the number higher)
Select the Program that the Rinse temperature is higher.

- 34 -

Power Button not automatically off after operation.
Check the button is blocked by foreign materials.
Check the Power Switch.(Replace it, if necessary.)
Check the Controller.(Replace it, if necessary.)

- 35 -

9. INSTALLATION INSTRUCTION
Step 1: PREPARE CUPBOARD OPENING
1. This dishwasher is designed to fit a standard dishwasher opening as shown below. 2. Select a location as close to sink as possible for easy connections to water and drain lines. 3. The dishwasher should not be installed more than 10 ft. (3m) from the sink for proper drainage. 4. If dishwasher is to be installed in a corner, a minimum of 2 in. (50mm) is required between the dishwasher and an adjacent a wall.
If dishwasher will sit directly on subflooring, subfloor should be sealed with a waterproof paint or sealer to prevent damage from steam. Drill a 1-1/2 (38mm) dia hole or cut out for drain hose, inlet hose and electrical cables on either side.
approx. 4 (100mm, W) X 4 (100mm, H)
These openings must be within 4 (100mm) from the floor and 1-5/8 (40mm) from the back wall. If there is a floor in the cabinet under the sink, it will also be necessary to drill or cut through the floor to connect the water and drain under the sink.
Ensure the floor under the dishwasher is at the same level as the rest of the room to allow for any service requirements.

- 36 -

Step 2: PREPARE THE ELECTRICAL WIRING

WARNING!

For personal safety, remove house fuse or open circuit breaker before installation. Do not use an extension cord or adapter plug with this dishwasher. Electrical and grounding connections must comply with the national electrical code/provincial and municipal code and/or other local codes.

1. This appliance must be operated with correct voltage as shown in this manual and on the rating plate, and connected to an individual, properly grounded branch circuit, protected by time delay fuse. Wiring must be 3 wires including ground. 2. The wiring or cord should be in an accessible location adjacent to, and not behind the dishwasher and within 4 ft. (1.2m) of the dishwasher side. 3. The wiring or cord must be grounded properly, if in doubt, have it checked by a qualified electrician. No other appliance shall be connected to the same outlet by a double adapter or similar plug. 4. The wiring or cord must be oriented as shown in Figure A below. 5. Check the dishwasher for any damage before trying to install it. 6. Make sure water line and Electrical line are oriented in the bottom channels as shown in the figure below. If you find any damage to the dishwasher, Please contact your dealer or builder immediately.

Figure A

- 37 -
Step 3: PREPARE THE WATER SUPPLY CONNECTION
1. This dishwasher may be connected to either hot or cold water. If the water can not be maintained below 149 (65 ), the dishwasher must be connected to cold water. 2. When connecting the dishwasher water line, sealing tape or compound should be used to avoid leaks. 3. When connecting the dishwasher water line, the house supply should be shut off. 4. The Water Supply Tube must be oriented as shown in Figure A on page 6.
Step 4: PREPARE DISHWASHER FOR INSTALLATION
1. Adjust the legs to the required height to fit properly under the countertop as shown below. 2. Check the level of dishwasher by using level.

- 38 -

Step 5: INSTALL THE DISHWASHER IN CUPBOARD
1. Remove the Lower Cover and orient dishwasher as shown below. 2. Before sliding the dishwasher into the cupboard opening, make all necessary height adjustments using the legs. 3. Slide the dishwasher into the cabinet opening carefully. Make sure that the drain hose inside the cabinet is not kinked. 4. Follow the instruction as in Figure B.

- 39 -

Step 6: DRAIN LINE CONNECTION
1. If the end of the drain hose does not fit to the drain line, use an adapter (not supplied) that must be resistant to heat and detergent and may be obtained from a plumbing shop. 2. There are 2 typical connections as shown in Figures C & D. There may be other options than shown here for connection the drain hose. The drain connection must meet local plumbing regulations. The S trap spigot must be drilled out cleanly and free of obstruction to its maximum internal diameter, if used for drainage. To prevent syphoning, one of the following instruction methods must be followed:
Figure C: Connection to Disposer or waste Tee.

Drain Requirements

Figure D: Connection to Air Gap. Follow local codes and ordinances. Do not exceed 10 ft. (3m) distance to drain. Do not connect drain lines from other devices to the dishwasher drain hose.

- 46 -

EXPLODED VIEW - RACK ASSEMBLY (LDF6810 Series)
A101 A102 A103 A140 A157 A151 A144 A152

A142 A141

- 47 -
EXPLODED VIEW - PANEL ASSEMBLY (LDF7811/7810 LDS5811 Series)
K207 K253 K220 K260 K203 K208

K209 K252

K251 K254

K260 K262 K251

K212 K216 K203

- 48 -

EXPLODED VIEW - PANEL ASSEMBLY (LDF6810 Series)
K207 K253 K220 K260 K203 K208 K251 K209 K252

- 49 -

EXPLODED VIEW - DOOR ASSEMBLY

LDF7811Series

K110 K006 K006 K124 K002 K005 K230 K121 K101 K001 K122

LDF7810/ LDF6810Series

K100 K006

LDF5811Series

K010 K030

- 50 -

EXPLODED VIEW - SUMP ASSEMBLY

M110 M038 M037

M025 M130 M035
M120 M027 M007 M034 M088 M220 M036

M028 M026 M031 M087

- 51 -
11. REPLACEMENT PART LIST
CAUTION : BEFORE REPLACING ANY OFTHESE COMPONENTS. READ CAREFULLY THE SAFETY PRECAUTIONS IN THIS MANUAL NOTE : S(SAFETY PARTS), AL(ALTERNATIVE PARTS)
LG MODEL: LD-6100WB/BB/TB YOUR MODEL: LDF7811WW/BB/ST
*001 *002 *003 *005 A003 A005 A006 A007 A008 A010
Run_Date : 2005-01-30 SPECIFICATION: 120V 60Hz

PART No.

3829DD3002B 3890DZ3015A 3828ED3001X 5001DD4001A 4766DD2004A 4810DD4002B 4980ED2015A 4980ED2014A 4980ED2018A 3090ED1001A 3090ED1001B 3090ED1001C 3090ED1002A 3090ED1002B 3090ED1002C 3551DD2001A 3551DD2001B 3551DD2001C 5249DD1002A 5249DD1001A 4974DD9001A 1WZZDD3001A 4370ED3007A 3750DD2001A 3806DD3004A 3650DD3001A 3650DD3002A 5005DD1001A 6877DD1002A 5215ED3001E 3751DD1001A 3750ED1004A 4581DD9002B 3750DD2003A 4930DD3006A 3750DD1001A 3750DD1002A 3751DD1002A 3750ED1005A 4975ED2005A 4975ED2004A 4930DD3003A 4930DD3005A 3750DD2002A 6201EC1006A
MANUAL ASSEMBLY, OWNERS BOX, CARTON MANUAL, SERVICE ACCESSORY ASSEMBLY FELT BRACKET, TOP SUPPORTER, HOLDER SUPPORTER, HOLDER SUPPORTER, HOLDER CABINET WB BB ST WB BB ST WB BB ST

COMMENTS

LOWER FELT

CABINET

A040 A050 A060 A070 A073 A074 A080 A101 A102 A103 A110 A120 A130 A140 A141 A142 A144 A147 A148 A149 A150 A151 A155 A156 A157 A158 A159 A160
COVER ASSEMBLY, LOWER NOZZLE ASSEMBLY NOZZLE ASSEMBLY GUIDE ASSEMBLY WASHER, DRAWING SHAFT, NOZZLE RACK DECO HANDLE HANDLE FRONT HANDLE REAR BASKET ASSEMBLY, SPOON HARNESS, PWB HOSE ASSEMBLY, DRAIN RACK ASSEMBLY RACK ROLLER ASSEMBLY RACK HOLDER RACK RACK RACK ASSEMBLY RACK GUIDE ASSEMBLY GUIDE ASSEMBLY HOLDER HOLDER RACK FILTER ASSEMBLY (CIRC)
LOWER NOZZLE UPPER NOZZLE

CUP RACK STS FRONT REAR

LOWER RACK

UPPER RACK RIGHT LEFT

- 52 -
E010 F001 F004 F005 F011 F013 F014 F022 F040 F041 F042 F043 F045 F050 F060 F101 F110 F117 F132 F143 F144 F171 F174 F191 F192 F210 K001 K002 K005

PART NAME

BUSHING FRAME ASSEMBLY NOZZLE ASSEMBLY SHAFT NOZZLE SPRING, HINGE CONNECTOR ASSEMBLY HINGE, BRACKET SENSOR ASSEMBLY GUIDE ASSEMBLY HOSE, INLET HOSE, CONNECTOR HOSE, CONNECTOR COVER, PROTECT NUT, DRAWING GASKET PACKING RAIL ASSEMBLY STOPPER, ROLLER PACKING HINGE ASSEMBLY HINGE ASSEMBLY LATCH, LOCK BRACKET, HINGE GUIDE, WATER GUIDE, NOZZLE RAIL ASSEMBLY DISPENSER BRACKET ASSEMBLY HANDLE WB BB ST WB BB ST WB BB ST WB BB ST
4830ED4001A 3211DD1001A 5249DD2001A 4370ED3006A 4970ED4004A 4933DD3001A 4810ED4004A 6501DD2001A 4975DD1001A 5214DD3001A 5214DD3003A 5214DD3002A 3550DD2001A 4020FD3641C 4986DD3001A 3920DD3002A 5219DD2002A 4620ED3001A 3920DD3005A 4775ED3004A 4775ED3003A 4026DD3001A 4810DD1001A 4974DD2003A 4974DD3001A 5219DD2001A 4924FD2123E 4810FD3805A 3650ED2006A 3650ED2006B 3650ED2006C 3806ED3008A 3806ED3008B 3806ED3008C 3550ED0001A 3550ED0001B 3550ED0001C 3551DD1003A 3551DD1003B 3551DD1003C 4937DD9001A 5835ED2002A 4986DD3003A 3550ED3011A 5232ED2001A 4775DD2001A 4775DD2002A 5020ED3008C 5020ED3008D 5020ED3008E 3790ED3007A 3790ED3007D

SPEC&COLOR

TOP NOZZLE TOP NOZZLE
MUST CHANGE F117 TOGETHER(REF 24P-13) TUB PACKING

DOOR FRAME

MUST CHANGE F117 TOGETHER(REF 24P-13)

DECO, HANDLE

COVER FRONT
K030 K100 K110 K121 K122 K124 K141 K142 K201 K203
COVER ASSEMBLY, FRONT DOOR LINER ASM BLOWER ASSEMBLY GASKET COVER, BLOWER VENT DOOR HINGE ASSEMBLY DOOR HINGE ASSEMBLY BUTTON, CONTROL WINDOW
DOOR LINER + DAMPING SHEET + GASKET BLOWER GASKET

WB BB ST WB BB

PROGRAM BUTTON TOP WINDOW

- 53 -

K203 K207 K208 WINDOW COVER, GUIDE
ST WB BB ST WB BB ST WB BB ST WB BB ST WB BB ST
3790ED3007E 3550ED3012A 3720ED1005A 3720ED1005B 3720ED1005C 5020ED3011A 5020ED3011B 5020ED3011A 3550ED1009A 5020ED3012C 5020ED3012D 3791DD3001E 3846ER1001A 3846ER1001B 3846ER1001A 3791DD3001A 3791DD3001B 3791DD3001B 6871DD1006A 6871DD2001A 6871DD2002A 6327DC3001A 4027ED3002A 4930DD3002A 4986DD3002A 3485ED1002A 3485DD1001A 5220DD3001A 4681ED3001B 3W40025C 4430ED3001A 3920ED4009B 5832DD4001A 4036DD3001A 4930DD3008A 5231DD1001A 4930DD3012A 4681EA2002D 4681ED1004A 5301DD1001A 3W40025P 6501ED2002D 3740ED3003A 4769DD2001A 5231ED1001A 3111DD1001A 5911ED3003A 5221DD1001A 5220ED4004A 3040ED1003A 3551DD1002A 3110DD3002A 4778ED3001A

PANEL, CONTROL

K209 K215 K216
BUTTON, POWER SWITCH COVER, GUIDE BUTTON, CONTROL

OPTION BUTTON

MARK, PET
K230 K251 K252 K253 K254 K260 M001 M005 M006 M007 M025 M026 M027 M028 M031 M034 M035 M036 M037 M038 M050 M060 M081 M086 M087 M088 M090 M110 M120 M130 M210 M220 M260 M261 M262 M270

WINDOW PWB(PCB) ASSEMBLY, MAIN PWB(PCB) ASSEMBLY, DISPLAY PWB(PCB) ASSEMBLY, DISPLAY DISPLAY LED ASSEMBLY LATCH, ASSEMBLY HOLDER GASKET SUMP, ASSEMBLY SUMP VALVE, CHECK MOTOR ASSEMBLY, WM SWITCH, MICRO CAM, SWITCH PACKING BLADE SEAL HOLDER FILTER ASSEMBLY, MESH HOLDER MOTOR ASSEMBLY, PUMP MOTOR ASSEMBLY, WM HEATER ASSEMBLY MICRO S/W SENSOR ASSEMBLY PROTECTOR (MECH) FLOAT ASSEMBLY FILTER ASSEMBLY, MESH CASE ASSEMBLY IMPELLER ASSEMBLY VALVE ASSEMBLY, INLET VALVE, CHECK BASE, CABINET COVER ASSEMBLY, BASE CASE LEG

FRONT WINDOW

SUMP GASKET SUMP+SEAL+GREASE VARIO MOTOR

VARIO PACKING

DRAIN MOTOR

SOIL SENSOR

- 54 -
LG MODEL: LD-6090WB/BB/TB YOUR MODEL: LDS5811WW/BB/ST
3829DD3002C 3890DZ3015A 3828ED3001X 5001DD4001A 4766DD2004A 4810DD4002B 4980ED2015A 4980ED2014A 4980ED2018A 3090ED1001A 3090ED1001B 3090ED1001C 3090ED1002A 3090ED1002B 3090ED1002C 3551DD2001A 3551DD2001B 3551DD2001C 5249DD1002A 5249DD1001A 4974DD9001A 1WZZDD3001A 4370ED3007A 3750DD2001A 3806DD3004A 3650DD3001A 3650DD3002A 5005DD1001A 6877DD1002A 5215ED3001E 3751DD1001A 3750ED1004A 4581DD9002B 3750DD2003A 4930DD3006A 3750DD1001A 3750DD1002A 3751DD1002B 3750ED1005B 4581DD9001A 4930DD3003A 4930DD3005A 3750DD2002A 6201EC1006A 4830ED4001A
A040 A050 A060 A070 A073 A074 A080 A101 A102 A103 A110 A120 A130 A140 A141 A142 A144 A147 A148 A149 A150 A151 A152 A157 A158 A159 A160 E010
COVER ASSEMBLY, LOWER NOZZLE ASSEMBLY NOZZLE ASSEMBLY GUIDE ASSEMBLY WASHER, DRAWING SHAFT, NOZZLE RACK DECO HANDLE HANDLE FRONT HANDLE REAR BASKET ASSEMBLY, SPOON HARNESS, PWB HOSE ASSEMBLY, DRAIN RACK ASSEMBLY RACK ROLLER ASSEMBLY RACK HOLDER RACK RACK RACK ASSEMBLY RACK ROLLER ASM HOLDER HOLDER RACK FILTER ASSEMBLY (CIRC) BUSHING

UPPER RACK

- 55 -
F001 F004 F005 F011 F013 F014 F022 F040 F041 F042 F043 F045 F050 F060 F101 F110 F117 F132 F143 F144 F171 F174 F191 F192 F210 K001 K002 K010 K100 K110 K121 K122 K124 K141 K142 K201
FRAME ASSEMBLY NOZZLE ASSEMBLY SHAFT NOZZLE SPRING, HINGE CONNECTOR ASSEMBLY HINGE, BRACKET SENSOR ASSEMBLY GUIDE ASSEMBLY HOSE, INLET HOSE, CONNECTOR HOSE, CONNECTOR COVER, PROTECT NUT, DRAWING GASKET PACKING RAIL ASSEMBLY STOPPER, ROLLER PACKING HINGE ASSEMBLY HINGE ASSEMBLY LATCH, LOCK BRACKET, HINGE GUIDE, WATER GUIDE, NOZZLE RAIL ASSEMBLY DISPENSER BRACKET ASSEMBLY COVER ASSEMBLY, FRONT DOOR LINER ASM BLOWER ASSEMBLY GASKET COVER, BLOWER VENT DOOR HINGE ASSEMBLY DOOR HINGE ASSEMBLY BUTTON, CONTROL WB BB ST WB BB ST WB BB ST WB BB ST WB BB ST

3211DD1001A 5249DD2001A 4370ED3006A 4970ED4004A 4933DD3001A 4810ED4004A 6510DD2001A 4975DD1001A 5214DD3001A 5214DD3003A 5214DD3002A 3550DD2001A 4020FD3641C 4986DD3001A 3920DD3002A 5219DD2002A 4620ED3001A 3920DD3005A 4775ED3004A 4775ED3003A 4026DD3001A 4810DD1001A 4974DD2003A 4974DD3001A 5219DD2001A 4924FD2123E 4810FD3805A 3551DD1004A 3551DD1004B 3551DD1004D 4937DD9001A 5835ED2002A 4986DD3003A 3550ED3011A 5232ED2001A 4775DD2001A 4775DD2002A 5020DD2001A 5020DD2001B 5020DD2001C 3790DD3001A 3790DD3001B 3790DD3001B 3720DD1001A 3720DD1001B 3720DD1001C 5020DD2004A 5020DD2004B 5020DD2004C

PROGRAM BUTTON

WINDOW

PROGRESS WINDOW

BUTTON, POWER SWITCH

- 56 -

K212 K216
BUTTON, CONTROL BUTTON, CONTROL WB BB ST WB BB ST WB BB ST
5020DD3001A 5020DD2003A 5020DD2003B 5020DD2003C 5020DD2002A 5020DD2002B 5020DD2002C 3846ER1001A 3846ER1001B 3846ER1001A 3790DD3002A 6871DD1006B 6871DD2003A 4027ED3002A 3650DD2005A 3650DD2005B 3650DD2005C 4930DD3002A 4986DD3002A 3485ED1002A 3485DD1001A 5220DD3001A 4681ED3001B 3W40025C 4430ED3001A 3920ED4009B 5832DD4001A 4036DD3001A 4930DD3008A 5231DD1001A 4930DD3012A 4681EA2002D 4681ED1004A 5301DD1001A 3W40025P 6501ED2002D 3740ED3003A 4769DD2001A 5231ED1001A 3111DD1001A 5911ED3003A 5221DD1001A 5220ED4004A 3040ED1003A 3551DD1002A 3110DD3002A 4778ED3001A
DELAY START OPTION BUTTON

BUTTON, CONTROL

K220 K230 K251 K252 K260 K262 M001 M005 M006 M007 M025 M026 M027 M028 M031 M034 M035 M036 M037 M038 M050 M060 M081 M086 M087 M088 M090 M110 M120 M130 M210 M220 M260 M261 M262 M270
MARK, PET WINDOW PWB(PCB) ASSEMBLY, MAIN PWB(PCB) ASSEMBLY, DISPLAY LATCH, ASSEMBLY HANDLE HOLDER GASKET SUMP, ASSEMBLY SUMP VALVE, CHECK MOTOR ASSEMBLY, WM SWITCH, MICRO CAM, SWITCH PACKING BLADE SEAL HOLDER FILTER ASSEMBLY, MESH HOLDER MOTOR ASSEMBLY, PUMP MOTOR ASSEMBLY, WM HEATER ASSEMBLY MICRO S/W SENSOR ASSEMBLY PROTECTOR (MECH) FLOAT ASSEMBLY FILTER ASSEMBLY, MESH CASE ASSEMBLY IMPELLER ASSEMBLY VALVE ASSEMBLY, INLET VALVE, CHECK BASE, CABINET COVER ASSEMBLY, BASE CASE LEG

OPTION WINDOW

WB BB ST

- 57 -

LG MODEL: LD-6105WB/BB/TB YOUR MODEL: LDF7810WW/BB/ST

- 58 -

E010 F001 F004 F005 F011 F013 F014 F022 F040 F041 F042 F043 F045 F050 F060 F101 F110 F013 F117 F132 F143 F144 F171 F174 F191 F192 F210 K001 K002 K005
BUSHING FRAME ASSEMBLY NOZZLE ASSEMBLY SHAFT NOZZLE SPRING, HINGE CONNECTOR ASSEMBLY HINGE, BRACKET SENSOR ASSEMBLY GUIDE ASSEMBLY HOSE, INLET HOSE, CONNECTOR HOSE, CONNECTOR COVER, PROTECT NUT, DRAWING GASKET PACKING RAIL ASSEMBLY CONNECTOR ASSEMBLY STOPPER, ROLLER PACKING HINGE ASSEMBLY HINGE ASSEMBLY LATCH, LOCK BRACKET, HINGE GUIDE, WATER GUIDE, NOZZLE RAIL ASSEMBLY DISPENSER BRACKET ASSEMBLY HANDLE WB BB ST WB BB ST WB BB ST WB BB ST

A040 A050 A060 A070 A073 A074 A080 A101 A102 A103 A110 A120 A130 A140 A141 A142 A144 A147 A150 A151 A152 A158 A160 E010 F001 F004 F005
COVER ASSEMBLY, LOWER NOZZLE ASSEMBLY NOZZLE ASSEMBLY GUIDE ASSEMBLY WASHER, DRAWING SHAFT, NOZZLE RACK DECO HANDLE HANDLE FRONT HANDLE REAR BASKET ASSEMBLY, SPOON HARNESS, PWB HOSE ASSEMBLY, DRAIN RACK ASSEMBLY RACK ROLLER ASSEMBLY RACK HOLDER RACK ASSEMBLY RACK ROLLER ASM HOLDER FILTER ASSEMBLY (CIRC) BUSHING FRAME ASSEMBLY NOZZLE ASSEMBLY SHAFT NOZZLE

- 61 -

F011 F013 F014 F022 F040 F041 F042 F043 F045 F050 F060 F101 F110 F013 F117 F132 F143 F144 F171 F174 F191 F192 F210 K001 K002 K005
SPRING, HINGE CONNECTOR ASSEMBLY HINGE, BRACKET SENSOR ASSEMBLY GUIDE ASSEMBLY HOSE, INLET HOSE, CONNECTOR HOSE, CONNECTOR COVER, PROTECT NUT, DRAWING GASKET PACKING RAIL ASSEMBLY CONNECTOR ASSEMBLY STOPPER, ROLLER PACKING HINGE ASSEMBLY HINGE ASSEMBLY LATCH, LOCK BRACKET, HINGE GUIDE, WATER GUIDE, NOZZLE RAIL ASSEMBLY DISPENSER BRACKET ASSEMBLY HANDLE WB BB ST WB BB ST WB BB ST WB BB ST
4970ED4004A 4933DD3001A 4810ED4004A 6501DD2001A 4975DD1001A 5214DD3001A 5214DD3003A 5214DD3002A 3550DD2001A 4020FD3641C 4986DD3001A 3920DD3002A 5219DD2002A 4933DD3001A 4620ED3001A 3920DD3005A 4775ED3004A 4775ED3003A 4026DD3001A 3751DD1006A 4974DD2003A 4974DD3001A 5219DD2001A 4924FD2123E 4810FD3805A 3650ED2006A 3650ED2006B 3650ED2006C 3806ED3008A 3806ED3008B 3806ED3008C 3550ED0001E 3550ED0001F 3550ED0001G 3551DD1003H 3551DD1003F 3551DD1003G 4937DD9001A 5835ED2002A 4986DD3003A 3550ED3011A 5232ED2001A 4775DD2001A 4775DD2002A 5020ED3008C 5020ED3008D 5020ED3008R 3790ED3007Q 3790ED3007R

- 62 -

ST WB BB ST WB BB ST WB BB ST WB BB ST
3790ED3007P 3550ED3012B 3720ED1005E 3720ED1005F 3720ED1005D 5020ED3011A 5020ED3011B 5020ED3011A 3550ED1009B 5020ED3012C 5020ED3012D 5020ED3012E 3846ER1001A 3846ER1001B 3846ER1001A 6871DD1006A 6871DD2001A 6871DD2002A 4027ED3002A 4930DD3002A 4986DD3002A 3485ED1002B 3485DD1001A 5220DD3001A 4681ED3001B 3W40025C 4430ED3001A 3920ED4009B 5832DD4001A 4036DD3001A 4930DD3008A 5231DD1001A 4930DD3012A 4681EA2002D 4681ED1004A 5301DD1001A 3W40025P 6501ED2002E 3740ED3003A 4769DD2001A 5231ED1001A 3111DD1001A 5911ED3003A 5221DD1001A 5220ED4004A 3040ED1003A 3551DD1002A 3110DD3002A 4778ED3001A

- 63 -

- 64 -

- 65 -

P/No. : 3828ED3001X