I Akkupflege Der Akku muss nicht vollstndig entladen werden, bevor er neu geladen wird. Bei diesem Akkutyp gibt es keinen leistungsbeeintrchtigenden Memory-Effekt. Verwenden Sie ausschlielich Original-LG-Akku und Ladevorrichtungen. LG-Ladevorrichtungen sind fr den Erhalt einer maximalen Akkulebensdauer ausgelegt. Der Akku darf unter keinen Umstnden geffnet oder kurzgeschlossen werden. Die Kontakte des Akkus mssen sauber gehalten werden. Tauschen Sie den Akku aus, wenn sich die Leistung deutlich verschlechtern sollte. Der Akku kann mehrere hundert Mal geladen werden, bevor er ausgetauscht werden muss. Laden Sie nach einer lngeren Benutzungspause den Akku neu. Die Ladevorrichtung darf nicht direktem Sonnenlicht ausgesetzt oder in Umgebungen mit hoher Luftfeuchtigkeit wie in Badezimmern verwendet werden. Bewahren Sie den Akku nicht an heien oder kalten Orten auf, da sich dadurch die Leistung verschlechtern kann.

Technische Daten

Allgemein
Produktname : LG-510W System SIM-Karte : GSM 900/DCS 1800 : Kleinformat 3 Volt-Technik

Abmessungen

Gre : 82.5 X 45 X 19.7 mm Gewicht inkl. Standard-Akku : 79g

Umgebungstemperaturen

Max.: +55C Min. : -10C

ENGLISH

WAP Phone
USERS MANUAL MODEL: LG - 510W
Please read this manual carefully before operating your set. Retain it for future reference.
LG-510W has a polished style which provides users a better feel and convenience.

LG-510W Phone

For Your Safety
All radio transmitters carry risks of interference with electronics in close proximity. GSM Phones must be switched off at all times in an aircraft.
Do not activate near petrol stations, fuel depots, chemical plants or blasting operations.
Switch off in hospitals : medical electronics, e.g. pacemakers and hearing aids can be affected.
Minor interference may affect TVs, radios, PCs, etc.
Do not hold the phone in your hand while driving.
Do not dismantle phone or battery.

Please note:

Use only specified batteries and chargers as others can damage the phone.
Unusable batteries should be disposed of in accordance with relevant legislation.
Only use ORIGINAL accessories to avoid damage to your phone.
Some of the services in this manual are not supported by all networks.

Important Information

This user's guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. Any changes or modifications not expressly approved in this user's guide could void your warranty for this equipment.

Contents

Overview
Accessories... 10 Part of the Phone... 12 Front of the Phone.. 12 Rear of the Phone... 13 Key Description.. 14 Side of the Key.. 15 Alphanumeric Keys... 16

How to Use Data and Fax call.. 88 Sending Data or Fax Calls.. 88 Receiving Data or Fax Calls.. 88 Voice Memo... 90 Voice Memo... 90 Voice Memo Menu.. 90 In call Menu... DURING A CALL.. Multiparty or Conference Calls.. 93
Care and Maintenance... 96 Technical Data... 98

Accessories

Check to make sure that you have all the parts shown below.

Travel Adapter Handset

Standard Battery

Warranty Card

Users manual

Portable Handsfree

<Optional Accessories>

Data Kit/CD (DK-15G)

Extended Battery (BEL-14G)
Cigar Lighter Adapter (CLA-15G)

Desktop Charger (DC-16G)

Handsfree Kit (IHF-16G)

Part of the Phone

Front of the Phone
Earpiece Active Folder Display Screen Soft Left Key Up/Down Side Key Confirm Key Send Key Record Key
Star Key Call Indicator Light Soft Right Key Navigation Keys END/PWR Key Numeric Keys Hash Key Microphone

Rear of the Phone

Battery 2 Cable Connector/ Battery Charging Connector/ Hands-Free Car kit Connector/ Ear Microphone Connector Battery Terminals SIM Card Socket Handstrap Hole Battery Lock

Key Description

The following shows key components of the phone.

Keypad Description

Soft Left Key / Soft Right Key Each of these keys performs the function indicated by the text on the display immediately above it. WAP Hotkey Used to connect to WAP directly by pressing this key. Navigation Keys Used to scroll through name, phone numbers, menus or setting options. Used to enter Audio Profile menu directly, also enter to vibration mode by pressing this key for a long time. Used to enter Messages menu directly. Send Key You can dial a phone number and answer a call. If you press this key without entering a number, your phone shows the most recently dialed number. Numeric Keys These keys are used mainly to dial in standby mode and enter numbers or characters in editing mode. When you press these keys for a long time. Used to call your voicemail box by. Used to call for international call by. Used to call Speed dials by from to.

Description

END/PWR Key Used to end or reject a call. This key is also used as Power Key. Pressing and holding this key for a few seconds.

You should speak a word within 2 seconds, and the phone asks you to speak it again to ensure the accuracy of voice recognition. After voice recognition has finished, Voice is attached automatically.
The voice can only be attached to main number which you set. For example, If you change main number voice will be automatically attached changed number. This means that you cannot attach voice to mobile, office, home number simultaneously. You can add voice tag to phone number in SIM card. The voice tag can be erased removing or changing SIM card. And voice tag attached to phone number in SIM card may be attached to another phone number when you changed SIM card. Why? The answer is that SIM card doesnt contain information about voice tag.

Speed dial [Names 3]

You can associate any of the keys 2 to 9 with a Name list entry. You can call directly by pressing this key for 2-3 seconds. 1. Open the phonebook first by pressing mode. 2. Scroll to Speed dial, then press 3. Every Speed dial will be displayed. 4. If you want to add Speed dial, select <Is Empty>. Then, you can search the name in phonebook. 5. If you select allocated name by speed dial, you can view following the submenus. Change Delete : You can change the allocation of Speed dial. : You can delete the allocated speed dial number. [Names] in a standby [Select] to enter this menu.

Voice list [Names 4]

You can see all phone numbers which contain voice. You can also call directly by pressing [Send]. After selecting phone number by using and and press [Options], you can see following the submenus. Play : You can play voice which is attached to phone number. Change : You can change voice which is attached to phone number. Delete Call : You can delete voice which is attached to phone number. : You can call by selecting this menu.

Group [Names 5]

You can list up to 20 members per one group. There are 7 groups you can make lists to. 1. Press mode. [Names] to enter into the phonebook in standby [Select] to enter this menu.
2. Scroll to Group item then press
3. Every Group list will be displayed.: Family, Friend, Colleague, VIP, etc. 4. Select Group name that you want to manage by pressing [Select]. 5. Then submenus below will be displayed. Add member : 1. Select Add member, by pressing [Select] to enter. 2. If the Group member does not exceed 20, The search screen will be displayed(refer search name). Otherwise, the error message is displayed. 3. Press [OK] to add member to Group

[Names] in a standby

[Select] to enter.
3. Then submenus below will be displayed.

[Select] to

Information [Names 9]
Use this function to access a particular list of services provided by your network operator (if supported by the SIM card). 1. Open the phonebook first by pressing mode. 2. Scroll to SDN, then Press 4. Use and [Names] in a standby

[OK] to enter. [Send].

3. The names of the available services will be shown. to select a service. Press

Check memory

This feature allows you to see how many free and in-use are in your phonebook. 1. Open the phonebook first by pressing [Names] in standby mode. Select Information by pressing [Select]. 2. Scroll to Check memory, then press [OK] to enter this menu.
Own number (SIM dependent)
You can check your own number in SIM card.

Menu Tree

1 Messages 1 Write Send Save Use template Use namecard Add dictionary List dictionary 2 Inbox Delete Edit Forward Get numbers Reply Return call 3 Outbox Delete Edit Forward Get numbers 4 Templates 5 Namecard 6 Settings 1 Message type 2 Validity period
3 Status report 4 Pay for reply? 5 SMS centre 6 Voicemail centre 7 Cell broadcast 1 Read 2 Receive CB 3 Alert 4 Language 5 Topics 8 Check memory
2 Call Log 1 Missed 2 Incoming 3 Outgoing 4 Call charge 1 Call duration 2 Call costs 3 Setting 5 Delete all 1 Missed 2 Incoming 3 Outgoing 4 All calls
3 Call Divert 1 All calls *-1 Enable *-2 Disable *-3 Check status 2 When busy 3 Not reachable 4 No reply 5 All data calls 6 All fax calls 7 Cancel all
4 Audio Profile 1 Vibration 2 Private

*-1 *-2

Enable Change

Loud Quiet Headset Car

5 Settings 1 Alarm clock 1 Enable 2 Disable 2 Phone settings 1 Display 2 Voice dial 3 LED indicator 4 Language 3 Call setting 1 Minute minder 2 Answer mode 3 Send number 4 Call waiting 5 Auto redial 6 Auto answer 7 Select line 8 Next incoming 9 CUG 4 Date & Time 1 Date 2 Time
5 Security 1 PIN1 code 2 Call barring 3 Fixed dial num 4 Change code 6 Network 1 Automatic 2 Manual 3 Preferred 4 User define 7 Factory reset
6 Scheduler 1 New 1 Schedule 2 Memo 2 View day 3 View all 4 Delete last 5 Delete all
7 Accessory 1 Game 1 Comanche 2 Black Jack 3 Crazy Race 4 Corsair 5 Stone Axe 2 Unit convert 3 Calculator 4 World time
8 Internet 1 Home 2 Bookmarks 3 Profiles 4 Cache 1 Empty cache 2 Cache check 5 Security certf. 6 Profile reset
9 SIM Tool Kit This menu depends on SIM and the network services.

Messages [Menu 1]

Messages
This menu includes functions related to SMS (Short Message Service), voice mail, as well as the networks service messages.

Write [Menu 1-1]

You can write and edit text message up to 1024 characters. Also, you can check the number of characters. 1. Enter the Messages menu by pressing [Select]. 2. If you want to write a new message, select Write in the menu. 3. Input the message by using eZi text. For details, see eZi text(Page 40). 4. When you finish writing your message, press Then following option menu will be displayed. [Options].

Sends the text message. 1. If you want to send the text message, enter the number you want. 2. Your phone asks you to enter the number that you want to send it to. 3. After sending it, your phone asks whether you will store the edited message. 4. Press if you want to store it in Outbox and press dont want to. if you
Stores the message in Outbox. 1. Your phone asks whether you will save the edited message. 2. Press if you want to save it in Outbox and press dont want to. if you

Use template

The template is pre-defined message. You can add the template of the list to the message when you edit it.

Use namecard

The items of the name card are a name, mobile, office, fax, and email. You can add a namecard to the message.

Add dictionary

If you add a word you use often, you can input it by pressing a key once for each character. 1. Enter the menu. 2. Scroll to highlight Add dictionary, and then press 3. Input a word, and then press [Add]. [Select].

List dictionary

You can view the list you already saved words in a dictionary. 1. Enter the menu. 2. Scroll to highlight List dictionary, and then press 3. You can check the word list. 4. If you want to delete a word, press [Delete]. 5. If you want to delete all words in a list, select Delete all at the bottom of the list by pressing [Select]. [Select].
The eZi text allows you to type easily and quickly. If you just press a key marked a character on the keypad, you can get a character you want. It is useful to make a word and a sentence. If you pass key for a long time, you can change the type of language. Also, the phone supports four modes: eZi Mode, Numeric mode, Capital mode, and Small mode. If you want to change mode, press key.

How to Use in eZi mode

To input a character in eZi text mode, you just press each key once for a character you want. For example, to write Girl in eZi mode;
How to use in Numeric mode
To input a number in Numeric mode, you press a number key displayed on the keypad.
How to use in Capital mode
To input Capital letter, you press a character key displayed on the keypad.

How to use in Small mode

To input Small letter, you press a character key displayed on the keypad.
If you want to input a symbolic character, press key in each mode.

Inbox [Menu 1-2]

When you receive a text message, your phone shows the symbol and stores it in the incoming message lists. Scroll to the desired message by using ,. In addition, you can see Delete all for deleting all incoming messages at the bottom of the list. While reading the message, press [Options] to access the available options.

Delete

The selected message is deleted.
You can edit an incoming message and send or save the edited message.

Forward

You can forward the selected message to the other party.

Get numbers

If the selected message has the phone number, you can extract and save it in a phonebook. Also, you can call by this number.
You can reply to the sender by message.

Return call

You can call back to the sender who sent the message automatically.

Outbox [Menu 1-3]

When you enter this menu, you can see the outgoing call list. Scroll to the desired message by using , and press to see the message. And if you want to exit Outbox menu, press. And if you want to exit outbox menu, press. In addition, you can see Delete all for deleting all outgoing messages at the bottom of the list. While reading message, press submenus. [Options] to access the following
You can edit an outgoing message and send or save it.

Templates [Menu 1-4]

Its for editing pre-defined messages. You can see 11 pre-defined messages in the list. You can save 6 templates before you edit. But you can changed them. The others are <empty>.
: You can edit a template.
Delete : You can delete the template.

Namecard [Menu 1-5]

Its for editing the namecard. The items of the namecard are a name, mobile, office, fax, and email.
: You can edit a namecard.
Delete : You can delete a namecard.

Settings [Menu 1-6]

Message type [Menu 1-6-1]
Text, Voice, Fax, Natl. paging, X.400, E-mail, ERMES Usually, the type of message is set to Text. You can convert your text into alternative formats, which are suitable for the device that will be received the message. Contact your service provider for the availability of this function.
Validity period [Menu 1-6-2]
This network service allows you to set how long your text messages will be stored at the message center while attempts are made to deliver them to you.

Diverts voice calls when the phone is switched off or out of range.

No reply [Menu 3-4]

Diverts voice calls which you do not answer.
All data calls [Menu 3-5]
Diverts to a number with a PC connection unconditionally.

All fax calls [Menu 3-6]

Diverts to a number with a fax connection unconditionally.
The submenus [Menu 3-x-x]
Call Divert menus have the submenus as shown below.

Enable [Menu 3-x-1]

Activating the corresponding service.

Voicemail box [3-x-x-1]

Forwards to message center. This function is not included in All data calls and All fax calls menus.

Other number [3-x-x-2]

Inputs the number for diverting.

Favorite [3-x-x-3]

Shows the list of 5 diverting numbers.
You can select the number you want in Favorite menu.

Disable [Menu 3-x-2]

Deactivating the corresponding service.
Check status [Menu 3-x-3]
Checking the Status of the corresponding service.

Cancel all [Menu 3-7]

Cancels all call divert service.

Audio Profile [Menu 4]

Audio Profile
<Press three times> In this menu, you can adjust and customize the phone tones for different events, environments and callers group. (e.g. When you are in car, you can choose the Car profile, Etc) 1. Press 2. Press Profile. [Menu] in standby mode. for direct access or use and to enter Audio key in
3. Also you can enter this menu directly by pressing standby mode.

Vibration [Menu 4-1]

Activate : You can adjust the Audio profile as Vibration if you need vibration mode.

Private [Menu 4-2]

Enable : You can adjust the Audio profile as Private. Change : You can change the values of Audio Profile submenus.

Loud [Menu 4-3]

Enable : You can adjust the profile as Loud if you are in a noisy environment.
Change : You can change the values of Audio Profile submenus.

Quiet [Menu 4-4]

Enable : You can adjust the profile as Quiet if you are in Quiet place.

Headset [Menu 4-5]

Enable : You can adjust the profile as Headset when you put on a headset.

Car [Menu 4-6]

LCD contrast [Menu 5-2-1-5]
You can set the brightness of LCD you want by pressing ,.

Voice dial [Menu 5-2-2]

Automatic : You can enter voice dial mode whenever you opens folder. Manual : You can enter voice dial mode by pressing for a long time. key
LED indicator [Menu 5-2-3]
You can set the network status thru Call indicator Light. If you are in service area, Call Indicator Light will flicker to Green. On the contrary, if you are in no service area, this light will change to Red.

Language [Menu 5-2-4]

You can select the language that will be displayed on the phone. The default language is German.

Call setting [Menu 5-3]

You can set the menu relevant to a call by pressing Setting menu. [Select] in
Minute minder [Menu 5-3-1]
If you select Yes, you can check the call duration by beep sound every minute during a call.

Answer mode [Menu 5-3-2]

Any key [5-3-2-1]
If you select this menu, you can receive an incoming call by pressing any key except key.

Folder open [5-3-2-2]

If you select this menu, you can receive an incoming call by only opening folder.
How to use Handsfree portable: If you want to use the handsfree portable (earphone), please the button for a long time after inserting it to the connector when incoming a call.

Send number [Menu 5-3-3]

Yes [5-3-3-1]
If you select this, you can send your phone number to the other party. That is, your phone number will be displayed on receivers phone.

No [5-3-3-2]

If you select this, you cant send your phone number.
Call waiting [Menu 5-3-4]
(network dependent) If this service is Enable, you can accept a waiting (incoming) call. If this service is Disabled, you cannot recognize the waiting (incoming) call.

Enable [Menu 5-3-4-1]

Disable [Menu 5-3-4-2]
Check status [Menu 5-3-4-3]
Checking the Status of the service. 63

Auto redial [Menu 5-3-5]

Yes [5-3-5-1]
When this function is set on, your phone will make up to 10 attempts for a call after not connecting.

No [5-3-5-2]

Your phone will not make any attempts to connect the call after not connecting.

Auto answer [Menu 5-3-6]

This function will be activated only when your phone is connected to the handsfreekit or ear-mic.

Disable

Even though your phone is ringing, your phone will not answer automatically.

After 5 sec

After 5 seconds your phone will answer automatically.

After 10 sec

After 10 seconds your phone will answer automatically.

Select line [Menu 5-3-7]

This function is only used if Two line service supported by the Service Provider. Two independent phone numbers are registered for the phone. This function provides you with the selection the currently used phone number. If this function is supported by your service provider, the following menu will be displayed. 1. Line 1 : Select Line 1 as the current phone number. 2. Line 2 : Select Line 2 as the current phone number.
Next incoming [Memu 5-3-8]
(network dependent) In case of Single Numbering Service, you can use the phone and a connected PC to send and receive fax, data, and voice. If you select the mode, you can receive data, fax, or voice each mode. Once you enter this menu, you following options are displayed.

Voice

You can receive the voice call.
You can receive the data call.
You can receive the fax call.
Single numbering service means that the number of fax or data service is identical with the number of voice service. And, these modes depend on network feature.
CUG (Closed User Group) [Menu 5-3-9]
(network dependent) Use this function to restrict usage of the phone to calls with numbers that belong to certain user groups. When this function is used every outgoing call is associated with a group index. If a group index is specified, it is used for all outgoing calls. If no group index is specified, the network will use the preferential index (a specific index that is stored in the network). CUG1~10 A. Select B. Edit C. Delete : If you select one of these Items, you can see the submenu. : Setting the selected CUG Index. : Editing the CUG name and CUG Index. : Deleting the selected CUG.

Options [Menu 6-2-1]

You can edit the subject, time, the repeat time and alarm time by pressing [Select].

Delete

You can delete the note.

View all [Menu 6-3]

Shows the notes that are set for all days. Use , to browse through the note lists. Pressing [Options] allows access to the same menu as in 'View day'.

Delete last [Menu 6-4]

You can delete for the last schedule already is notified you.

Delete all [Menu 6-5]

You can delete for the all note(s).

Accessory [Menu 7]

Accessory

<Press six times>

Game [Menu 7-1]
Your phone offers you the following 5 games to play with.
Comanche [Menu 7-1-1] Black Jack [Menu 7-1-2] Crazy Race [Menu 7-1-3] Corsair [Menu 7-1-4] Stone Axe [Menu 7-1-5]
The Control keys are different for each game. But each game has screens to explain the main control key. Other common control keys are below. [Common Key Function] [Soft 1 Key] [Soft 2 Key] : Start Game, Save Score : Pause Game, Back
[Record Key] : Back light [Power Key] : Exit Game

Unit convert [Menu 7-2]

This converts any measurement into a unit you want. There are 4 types that can be converted into units: Length, Width, Weight, and Volume. 1. You can select one of four unit types by pressing [Next] key. 2. Select the standard value by using 3. Select the unit you want to convert by pressing and. 4. You can check the converted value for the unit you want. Also, you can input the prime number by pressing. 5. Press key or [Back] key if you want to end the process for converting the value.

Calculator [Menu 7-3]

Calculator
This contains the standard functions such as +, , *, : Addition, Subtraction, Multiplication, and Division. 1. Input the numbers by pressing numeric keys. 2. Use a navigation key to select a sign for calculation. 3. Then input the numbers followed by the sign.
4. You can view the result by pressing

[Result] key.

5. If you want to continue the calculation, repeat the process. 6. Use [Back] key to erase any numbers or signs. Press key if you want to end the calculation process. 7. If you press If you press key, you can input a minus number. In addition, key, you can input a prime number.

Profile reset [Menu 8-6]

You can reset profiles to return to original settings.

On line menu

If you are on line, you can view the following these menus. I Go back Navigates back one page in the history list I Top Jumps you back to the top of the current page I Bookmarks Same to <Menu 8-2> I Add bookmark Creates a new bookmark for the page you are viewing. You can enter the title of site. I Go to URL Moves to the site that you want. In this menu, you can edit the site address that you want to move. I Home Same to <Menu 8-1 > I Reload Reloads the current page.
I E-mail connect Moves to the E-mail server that you configured. I E-mail set Sets the address of current site as E-mail server address I Stop Stops current page download
How to Use Data and Fax call
To be able to data or fax service, you need the communicate software such as a data or a fax program. Before using these functions, you need to connect your phone to a computer or make sure that your phone is in connection with a compatible device.
Sending Data or Fax Calls
1. Connect your computer to the phone. 2. After starting the communicate software, make a call and transmit a data or fax. 3. After the data or fax transmission, you can end the call by just ending of the communicate software, pressing [End] or by closing the folder.
Receiving Data or Fax Calls
If you have separate numbers for voice, data and fax calls, your phone recognizes the type of call.
Receiving Data or Fax Calls - Separate numbers (Multi-numbers)
To use a data or a fax service, the display shows which type of call you are receiving. To receive a data or fax call 1. Connect your computer to the phone. 2. After starting the communicate software, accept a call and receive a data or fax (if it is not answered automatically).
3. After the data or fax reception, you can end the call by just ending of the communicate software, pressing [End] or by closing the folder.
Receiving Data or Fax Calls - Single number
If you have a SIM card that does not support separate voice, data and fax numbers, the phone does not recognize the type of incoming call. To use a data or a fax service, make sure that you want to receive a data or fax call mode. You first have to set the phone to one of these options in the call mode (Settings Call Setting Next Incoming) sub menu. To receive a data or fax call 1. Press [Menu] in standby mode. 2. Select the Settings Call setting Next Incoming. 3. Select the call type you want (Voice, Data or Fax) and press [OK]. 4. Connect your computer to the phone. 5. After starting the communicate software, accept a call and receive a data or fax (if it is not answered automatically). 6. After the data or fax reception, you can end the call by just ending of the communicate software, pressing [End] or by closing the folder. Once you have set your phone for a specific incoming call, it remains set until you change it.

1-5 Rejecting an Incoming Call
When not in a call you can reject an incoming call without answering it by simply pressing the [End] key. When in a call you can reject an incoming call by pressing the [Menu] key and selecting Multiparty/Reject or by pressing [End] key.
1-6 Muting the Microphone
You can mute the microphone during a call by pressing the [Menu] key then selecting Mute. The handset can be unmuted by pressing the [Unmute].
When the handset is muted, the caller cannot hear you, but you can still hear them.
1-7 Switching DTMF Tones on During a Call
To turn DTMF tones on during a call, for example, to allow your handset to make use of an automated switchboard, select the [Menu] key, then DTMF On. DTMF tones can be turned off the same way.
1-8 Calling up the Main Menu
The Messages and SIM Tool kit main menu options can be reached from the in-call menu by selecting the [Menu] key, then Main Menu. SIM Tool kit menu is shown only when SIM in the handset supports SIM Tool kit service.
2 Multiparty or Conference Calls
The multiparty or conference service provides you with the ability to have a simultaneous conversation with more than one caller, if your network service provider supports this feature. A multiparty call can only be set up when you have one active call and one call on hold, both calls having been answered. Once a multiparty call is set up, calls may be added, disconnected or separated (that is, removed from the multiparty call but still connected to you) by the person who set up the multiparty call. These options are all available from the in-call menu and are listed in Section. The maximum callers in a multiparty call is five. Once started, you are in control of the multiparty call, and only you can add calls to the multiparty call.

2-1 Making a Second Call

You can make a second call while you are already in a call. To do this, enter the second number and press [Send]. When you get second call the first call is automatically put on hold. You can swap between calls by selecting the [Menu] key then Swap.
2-2 Setting up a Multiparty Call
You can connect a call on hold to the currently active call to form a multiparty call by selecting the [Menu] key then Multiparty/Join all.

2-3 Putting the Multiparty Call on Hold
To put a multiparty call on hold, select the Multiparty/Hold all. [Menu] key then
2-4 Activate the Multiparty Call on Hold
To make a multiparty call on hold active, select the then Multiparty/Join all. [Menu] key
2-5 Adding Calls to the Multiparty Call
To join an active call to the held multiparty call, select the [Menu] key then Multiparty/Join all.
2-6 Displaying Callers in a Multiparty Call
To scroll though the numbers of the callers who make up a multiparty call on the handset screen, press and keys.
2-7 Putting a Member of a Multiparty Call on Hold
To place one selected caller (whose number is currently displayed on-screen) of a multiparty call on hold, select the [Menu] key then Multiparty/Exclude.
2-8 A Private Call in a Multiparty Call
To have a private call with one caller of a multiparty call, display the number of the caller you wish to talk to on the screen, then select the [Menu] key and Multiparty/Private to put all the other callers on hold.
2-9 Ending a Multiparty Call
The currently displayed caller of a multiparty call can be disconnected by pressing the [End] key. To end a multiparty call, press the [Menu] key then select Multiparty/End multiparty. Selecting the [Menu] key then Multiparty/End all, will end all the active and held calls.
2-10 Explicit Call Transfer (ECT)
If you have one caller on hold and another active call, you may connect one call party to another call party and then leave the call. This is done by selecting the Multiparty/Transfer option from the incall menu.

Care and Maintenance

When using this unit, basic safety precautions as below should be always followed. Do not touch the adapter with wet hands. Do not disassemble this unit. (Take it to a qualified service technician when repair work is required.) Away from electrical appliance such as a TV, radio or personal computer. The unit should be situated from heat sources such as radiators or cookers. Do not drop. Do not subject this unit to mechanical vibration or shock. The coating of the phone may be damaged if covered with wrap or vinyl wrapper. Use dry cloth to clean the exterior of the unit. (Do not use solvent such as benzene, thinner or alcohol.) Do not subject this unit to excessive smoke or dust.
I Caring for the Battery You do not need to completely discharge the battery before recharging. Unlike other battery systems, there is no memory effect that could compromise the batterys performance. Use only LG batteries and chargers. LG chargers are designed to maximize the battery life. Do not disassemble or short-circuit the battery pack. Keep the metal contacts of the battery pack clean. Replace the battery when it no longer provides acceptable performance. The battery pack may be recharged hundreds of times until it needs replacing. Recharge the battery if it has not been used for a long time to maximize usability. Do not expose the battery charger to direct sunlight or use it in high humidity, such as the bathroom. Do not leave the battery in hot or cold places, this may deteriorate the battery performance.