Gua del usuario

Alguna de los contenidos de este manual puede tener variaciones con el telefono dependiendo del software o de proveedor de servicio.

CU500 User Guide

MMBB0197501 (1.0) H
Some of contents in this manual may differ from your phone depending on the software of the phone or your service provider.

User Guide

Copyright 2006 LG Electronics, Inc. ALL RIGHTS RESERVED. All materials used herein, including but not limited to trademarks, service marks, and all other commercially valuable rights, properties and products are owned by and proprietary to LG Electronics, Inc. and may not be reproduced, republished, redistributed or disseminated, either in whole or in part, without the express written permission of LG Electronics, Inc. All other marks are proprietary to their respective owners. Features and specifications are subject to change without prior notice.

Table of Contents

For Your Safety.. 7 Your Phone... 12
Phone Components... 12 Your Phones Features... 13 Task menu key... 14 Display Information... 15 Making International Calls... 21 Ending a Call... 21 Making a Call From the Contacts.. 21 Adjusting the Volume.. 22 Answering a Call.. 22 Vibrate Mode (Quick).. 22 Signal Strength... 22 Entering Text... 22

Getting Started.. 17

Installing the SmartChip.. 17 Charging the Battery... 18 Memory card slot... 19 Inserting the memory card... 19 Removing the memory card.. 19 Turning Your Phone On and Off.. 20 Access Codes... 20 Barring Password.. 20
Selecting Functions and Options.. 26 In-Call Menu... 27
During a Call... 27 Making a Second Call.. 27 Swapping Between Two Calls.. 27 Answering an Incoming Call.. 27 Rejecting an Incoming Call.. 27 Muting the Microphone... 28 Using the Speakerphone.. 28

General Functions.. 21

Making a Call... 21 Making a Call by Send Key... 21
Conference Calls.. 28 Making a Second Call.. 29 Setting Up a Conference Call.. 29 Activate the Conference Call on Hold.. 29 Adding Calls to the Conference Call.. 29 Private Call in a Conference Call. 29 Ending a Conference Call.. 29

Messaging.. 38

New Message.. 38 Inbox... 40 IM... 41 Drafts.... 44 Outbox... 44 Sent... 45 Voicemail... 45 Templates... 46 Text Templates... 46 Multimedia Templates... 46 Signature... 46 Message Settings... 47 Text Message... 47 Multimedia Message.. 47 Voicemail... 48 Download Messages.. 48
Menu Tree... 30 Cingular Music.. 34
Music Player... 34 Shop Tones.. 36 MusicID... 36 Radio... 36 Music Videos... 36 The Buzz.... 36 Community... 37 Music Apps.. 37

Recent Calls... 49

Missed Calls... 49 Dialed Calls... 49 Received Calls... 49 All Calls... 49 Call Duration... 49 Data Counter... 50 Data Time... 50 Data Volume... 50
Cookie Settings... 54 Character Encoding... 54 Scrolling Control... 54 Show Image... 54 AuthWallet... 54

Cingular Mall.. 56

Shop Tones.. 56 Shop Games... 56 Shop Graphics.. 56 Shop Multimedia.. 56 Shop Applications.. 56 MEdia Net Home... 56

MEdia Net... 51

MEdia Net Home... 51 Bookmarks... 52 Saved Pages... 52 Go to URL... 52 Security... 52 Browser Settings.. 53 Accounts... 53 Cache Settings... 54
Cingular Video.. 57 My Stuff.. 58
Games... 58 Applications... 58 Audio & Ringtones... 58
Graphics.... 59 Video... 59 Tools... 59 Alarm Clock.. 59 Calendar.... 60 Notepad... 60 Calculator... 60 Tip Calculator... 61 World Clock... 61 Tasks... 61 Stop Watch.. 61 Unit Converter.. 62 Date Finder... 62 D-Day Counter.. 62 Camera & Recordings.. 62 Take Photo... 62 Record Video... 63 Record Voice... 64
Other Files... 64 Memory Card... 65

Indicates that Ring has been set for alert. Indicates that Ring and vibration has been set for alert. Indicates that Silent has been set for alert. Indicates that Vibration has been set for alert. Indicates that the speakerphone has been activated. Indicates that the Bluetooth function has been activated. Indicates that the data is being transmitted using a Bluetooth connection. Indicates that the connection to a headset with Bluetooth has been activated. Indicates that the connection to a hands-free with Bluetooth has been activated. Indicates that the connection to a stereo Bluetooth device has been activated. Indicates that the connection to a hand-free & stereo with Bluetooth has been activated. Indicates that the Multitasking function has been activated. Indicates that the TTY has been set and is on.
The Bluetooth word mark and logos are owned by the * license. Other trademarks and trade names are those ofBluetooth SIG, Inc. and any use of such marks by LG Electronics is under their respective owners.

Getting Started

Installing the SmartChip
When you subscribe to a cellular network, you are provided with a plug-in SmartChip loaded with your subscription details, such as your PIN, any optional services available and many others. n Important!
The plug-in SmartChip and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SmartChips out of the reach of small children.
3. Slide the SmartChip into the SmartChip socket so that it locks the card into place. Make sure that the notched corner is at the top left and the gold contacts of the card face into the phone.
1. If necessary, switch off the phone by holding down the [END] key until the power-off image appears. 2. Remove the battery. To do so:
When you need to remove the SmartChip, slide it, as shown, and take it out of the socket.
4. To insert the battery, align the golden contacts of the battery with the corresponding connectors on the battery compartment. Press down on the opposite end of the battery until it snaps into place.
2. Connect the travel charger to a standard AC wall outlet. Only use the travel charger that comes with the package.
n Warning 5. Attach back cover by sliding it up into position until it clicks.
The travel charger must be unplugged before you remove the battery, otherwise, the phone could be damaged.

Charging the Battery

Use of unauthorized accessories could damage your phone and void your warranty. To use the travel charger provided with your phone: 1. With the battery in position in the phone, connect the lead from the travel charger to the bottom of the phone. Check that the arrow on the lead connector is facing towards the front of the phone.
3. When charging is finished, disconnect the travel charger from the phone by pressing on the grey tabs on both sides of the connector while pulling the connector out. 1

Using the Speakerphone

You can use the integrated Speakerphone during a call by pressing the key. The loudspeaker is automatically deactivated when you end the call. n Warning
Due to higher volume levels, dont place the phone near your ear while the speakerphone is enabled.
You can make a second call while currently on a call simply by entering the second number and pressing the [SEND] key. When the second call is connected, the first call is automatically placed on hold. You can swap between calls, by pressing the [SEND] key.
Adding Calls to the Conference Call
To add a call to an existing conference call, press the right soft key, and then select the Join Calls sub menu from the Conference Call option.
Private Call in a Conference Call
To have a private call with one caller from a conference call, press the right soft key and select the Private Menu from the Conference Call option. When the numbers of the callers are displayed, select the one you wish to speak in private.
Setting Up a Conference Call
To set up a conference call, place one call on hold, conference in the second active call by pressing the right soft key and select the Join Calls sub menu option from the Conference Call menu.

Ending a Conference Call

Currently active conference call can be disconnected by pressing the [END] key.
Activate the Conference Call on Hold
To activate a conference call on hold, press the [SEND] key.

Menu Tree

The following illustration shows the available menu structure and indicates the: ] Number assigned to each menu option. ] Page where you can find the feature description. 1. Cingular Music (see page 34)
1.1 Music Player 1.2 Shop Tones 1.3 MusicID 1.4 Radio 1.5 Music Videos 1.6 The Buzz 1.7 Community 1.8 Music Apps

2. Messaging (continued)

2.8 Templates 2.8.1 Text Templates 2.8.2 Multimedia Templates 2.8.3 Signature 2.9 Message Settings 2.9.1 Text Message 2.9.2 Multimedia Message 2.9.3 Voicemail 2.9.4 Download Messages
2. Messaging (see page 38)
2.1 New Message 2.2 Inbox 2.3 IM 2.4 Drafts 2.5 Outbox 2.6 Sent 2.7 Voicemail
3. Recent Calls (see page 49)
3.1 Missed Calls 3.2 Dialed Calls 3.3 Received Calls 3.4 All Calls 3.5 Call Duration 3.6 Data Counter 3.6.1 Data Time 3.6.2 Data Volume
4. MEdia Net (see page 51)
4.1 MEdia Net Home 4.2 Bookmarks 4.3 Saved Pages 4.4 Go to URL 4.5 Security 4.6 Browser Settings 4.6.1 Accounts 4.6.2 Cache Settings 4.6.3 Cookie Settings 4.6.4 Character Encoding 4.6.5 Scrolling Control 4.6.6 Show Image 4.6.7 AuthWallet
6. Cingular Video (see page 57) 7. My Stuff (see page 58)
7.1 Games 7.2 Applications 7.3 Audio & Ringtones 7.4 Graphics 7.5 Video 7.6 Tools 7.6.1 Alarm Clock 7.6.2 Calendar 7.6.3 Notepad 7.6.4 Calculator 7.6.5 Tip Calculator 7.6.6 World Clock 7.6.7 Tasks 7.6.8 Stop Watch 7.6.9 Unit Converter 7.6.0 Date Finder 7.6.* D-Day Counter

5. Cingular Mall (see page 56)
5.1 Shop Tones 5.2 Shop Games 5.3 Shop Graphics 5.4 Shop Multimedia 5.5 Shop Applications 5.6 MEdia Net Home

7. My Stuff (continued)

7.7 Camera & Recordings 7.7.1 Take Photo 7.7.2 Record Video 7.7.3 Record Voice 7.8 Other Files 7.9 Memory Card
9. Settings (see page 68)
9.1 Audio & Ringtones 9.1.1 Shop Tones 9.1.2 Ringtones 9.1.3 Volume 9.1.4 Ring Alert Type 9.1.5 Key Tones 9.1.6 Message Alert Tones 9.2 Display 9.2.1 Shop Graphics 9.2.2 Wallpapers 9.2.3 Backlight Timer 9.2.4 Menu Styles 9.2.5 Languages 9.2.6 Dialing Fonts 9.2.7 Clocks & Calendar 9.2.8 Color Schemes 9.3 Bluetooth 9.3.1 Bluetooth On/Off 9.3.2 Device List 9.3.3 Bluetooth Files 9.3.4 Bluetooth Settings
8. Address Book (see page 66)
8.1 Contact List 8.2 New Contact 8.3 Caller Groups 8.4 Speed Dial List 8.5 Copy All Contacts 8.6 Delete All Contacts 8.7 Service Dial Numbers 8.8 My Numbers

9. Settings (continued)

9.4 Date & Time 9.4.1 Set Date 9.4.2 Date Format 9.4.3 Set Time 9.4.4 Time Format 9.4.5 Auto Update 9.5 Call 9.5.1 Call Forwarding 9.5.2 Send My Number 9.5.3 Auto Redial 9.5.4 Answer Mode 9.5.5 Minute Minder 9.5.6 Call Waiting 9.5.7 Call Reject 9.5.8 TTY 9.5.9 Send DTMF Tones 9.6 Security 9.6.1 Lock Handset 9.6.2 PIN Code Request 9.6.3 Fixed Dial Number 9.6.4 Change Codes
9.7 Connection 9.7.1 Network Profiles 9.7.2 USB Connection Mode 9.7.3 Dial Up Networking 9.8 Flight Mode 9.9 Software Update 9.0 Check Memory 9.0.1 Common 9.0.2 Reserved 9.0.3 SmartChip 9.0.4 Memory Card 9.* Handset Information 9.# Reset Settings 9.#.1 Clear Memory 9.#.2 Reset Default

Cingular Music

Music Player

Menu 1.1

laws of corresponding countries or regions regarding the Terms of Use of materials.
] All Songs: You can view the entire playlist in the internal/external memory. ] Playlists: You can create your own playlists by choosing songs from the All Songs menu list. ] Shuffle Songs: Plays music files in random order. ] Settings zSet Shuffle: Plays all tracks in random order. zSet Repeat: Allows you to set the play mode such as Repeat One, All or Off. zVisualization: Allows you to select the desired equalizer on the main screen. zEqualizer: Allows you to select the desired sound style. n Note
Copyrights of music files may be protected by copyright and intellectual property laws. Therefore, it may be required to obtain necessary permissions or licenses before you can reproduce or copy the materials. In some countries, national law prohibits copying of copyrighted materials for personal archive as well. Prior to downloading or copying the files, please ensure that you adhere to the applicable laws and 34

] Delete All Read Messages: You can delete all read messages. ] Delete All: You can delete all messages.

Offline Menu

Sign In This allows users to login by filling in the User ID and Password. n Note
Once the User ID and Password are saved, you will not be required to type them in again during Login process. This feature is optional.

Menu 2.3

The Instant Messaging feature can only be used with the support of the network operator or communities such as AIM, MSN Messenger, Y! Messenger and ICQ. For Instant Messaging users, a valid User ID and Password will be required in order to login and exchange messages as well as checking the online status. There are two ways to use the Instant Messaging feature. 1. Through the Main Menu. 2. Through the IM hotkey (the right navigation key). Short pressing the hotkey will bring up the available IM clients. The menu items below might not appear since not all IM communities support the various options. Also the menu strings may appear differently based on the selected IM communities. The keywords such as User ID, Login and Contact will be used as general terms in IM menus according to the currently selected communities such as AIM, MSN Messenger, Y! Messenger and ICQ.
Saved Conversations This is where a user can view saved conversations. Settings ] My Status: Allows you to set your status to Available, Busy or Invisible. ] Set Sound: Allows you to set on/off an alert for the Contact when they have activity on their session. ] Default Provider: Allows you to set the default IM community to login. ] Auto Sign On: You may set the automatic IM Login process by choosing between the When Power On or When IM Start options.
] Network: You may check your IM Network Profiles or Server Address information.

IM Information

This indicates the Instant Messaging Client Information such as Client Name and Version Number.
] Send to Others: This offers the ability to send a message to an unknown contact. When selected, a User ID must be typed in prior to starting an IM session or conversation. ] Saved Conversations: You may view or delete the stored conversation session. ] Search: This allows you to search for the contact by Email address or name. ] Settings zMy Status: Allows you to set your status to Available, Busy or Invisible. zSet Sound: Allows you to set an alert for the Contact when they have activity on their session. zAuto Sign On: You may Login to an IM client automatically with the When Power On or When IM Start options. ] Log Out: This begins the Logout process.

Online Menu / 1 to 1 conversation
After a successful Login, a list of contacts with Screen Names will appear on screen. Depending on the cursor location in the contacts, the following menu options will be available.
When cursor is located on a Conversations List
The Conversations List contains both the active contact where a conversation has taken place as well as an unknown contact.
When you select the left/right navigation key or the Confirm key on the Conversation List, it offers the ability to view or hide conversations.
When cursor is located on a Conversation
] End Conversation: This closes the selected conversation. If an unknown contact was selected, that contact is deleted.
] Block/Unblock Contact: This allows you to block/unblock the selected Conversations Contact. ] View Information: This allows you to view the User ID and Status Text information. ] Search: This allows you to search for the contact by Email address or name. ] Settings: Please refer to the previous Settings Menu. ] Log Out: This begins the Logout process.
] Search: This allows you to search for the contact by Email address or name. ] Settings: Please refer to the previous Settings Menu. ] Log Out: This begins the Logout process.
When cursor is located on a Contact
] Add Contact: This adds a new contact to the selected contacts list; in the meantime this searches for the contact on the basis of E-mail Address, First Name, or Last Name. ] Delete Contact: This deletes the selected Contact. ] Block/Unblock Contact: This allows or blocks conversation with the selected Contact. ] Refresh Contact: This refreshes the present information on the selected contact. ] View Information: This allows you to view information. It provides User ID, Status Text. ] Search: This allows you to search for the contact by Email address or name. ] Settings: Please refer to the previous Settings Menu. ] Log Out: This begins the Logout process.
When cursor is located on a Contact List
] Add Contact: This adds a new contact to the selected contacts list; in the meantime this searches for the contact on the basis of E-mail Address, First Name, or Last Name. ] Refresh List: This refreshes the present information on the contacts within the contacts. ] Send to Others: This offers the ability to send a message to an unknown contact. When selected, the User ID must be typed in prior to starting an IM session or conversation. ] Saved Conversations: This is where a user can view saved conversations.

Menu options available in the Conversation screen
] Back To List: This brings the screen back to the contacts. ] Insert: You can insert Symbol, Template and emoticons in the conversation screen. ] Block/Unblock Contact: This allows or blocks conversation with the selected Contact. ] Save Conversation: Stores the currently active conversation. ] End Conversation: This ends the active conversation and clears the conversation buffer. ] Settings: Please refer to the previous Settings Menu. ] Text Entry Mode: Sets the text input mode such as abc, Abc, ABC, T9 abc, T9 Abc, T9 ABC and 123. ] Text Entry Mode Settings: This selects the T9 predictive mode Language. n Note
zIn the conversation window, you can use the up/down navigation key for scrolling through the conversation. zMaximum number of characters supported by a message is 400 characters for receiving and 128 characters for sending. 44
zThe present information might not update in real time so the Refresh List/Refresh Contact option can be used for the most up to date status.

Drafts

Menu 2.4
You can view the messages saved as a draft. The draft messages are listed with the date and time of when the messages were saved. The following [Options] are available. ] Information: Allows you to view the information on the message. ] Multi Delete: Allows you to delete multiple messages you selet from the folder. ] Delete All: Deletes all messages in the folder.

Outbox

Menu 2.5
Outbox is a temporary storage place for messages waiting to be sent. When you press the [SEND] key, you can make a call to the number of the recipient number of the selected message. If the message is not sent from the Outbox, you will
receive a sound alert along with a Message Sent Fail notice on the screen. Another attempt will be made to send the failed message and after two unsuccessful attempts, the message will no longer be sent automatically order to send the message that has failed, you must press Resend from the Options menu. After the maximum number of Send attempts has been reached the Send function has failed. If you were trying to send a text message, open the message and check that the Sending options are correct. When the message Send has failed, the following [Options] are available. ] Delete: Deletes the selected message which has fialded. ] Edit: Allows you to edit the selected message. ] Error Status: Allows you to see the error status of the failed message.

] Information: Allows you to view the information on the message. ] Delete All: Deletes all messages in the folder.

Menu 2.6

This is where you can view the lists and contents of sent messages and also verify if transmission was successful. The following [Options] are available. ] Delete: Deletes the selected message from the Sent list. ] Information: Allows you to view information on the message. ] Delete All: Deletes all messages in the folder.

Voicemail

Menu 2.7
This menu provides you with a quick way of accessing your voice mailbox (if provided by your network). Before using this feature, you must enter the voice server number obtained from your service provider. This may already be available; to check the voicemail,

press and hold the

key will
Multimedia Templates (Menu 2.8.2)
1. You can add new multimedia templates by pressing the left soft key [New]. 2. The following choices are available under Options. ] Preview: You can preview multimedia messages you have created. ] Text Entry Mode: Sets the text input mode as abc, Abc, ABC, T9 abc, T9 Abc, T9 ABC and 123. ] Text Entry Settings: Allows you to set the text entry language to English, Spanish or French. ] Cancel: Allows you to exit the text input mode without saving your message.
When new voicemail is received, the symbol be displayed on the screen. n Note
Please check with your network service provider for details of their service in order to configure the handset accordingly.

Templates

Text Templates (Menu 2.8.1)

Menu 2.8

There are 6 predefined messages in the list. You can view and edit the template messages or create new messages. The following [Options] are available. ] Send: Allows you to send the selected template via Message. ] Delete: Allows you to delete the selected template message. ] Edit: Allows you to write a new message or edit the selected template message. ] Delete All: Deletes all messages in the folder.

Signature (Menu 2.8.3)

This feature allows you to create your Text signature. You can use symbols, templates and contacts as part of the signature.

Message Settings

Text Message (Menu 2.9.1)

Menu 2.9

] Send Delivery Receipt: Allows you to send a delivery confirmation mail for a Multimedia Message. ] Request Read Receipt: Allows you to request a message read confirmation mail for a Multimedia Message ] Send Read Receipt: Allows you to send a message read confirmation mail for a Multimedia Message. ] Automatic Download: - On: You can always receive multimedia messages automatically. - Off: You only receive notification messages in the inbox and then you can check the notifications. ] Message Center: The details for the Multimedia gateway are pre-loaded onto your handset and should not be changed. ] Message Size: This menu allows you to determine the maximum size of a Multimedia message when writing the message.

Shop Graphics

Menu 5.3

Menu 5.6

This menu option connects to Cingulars graphic download site. n Note
Additional charges may incur when downloading graphics. Contact your service provider for further information. 56
This connects to the homepage. The homepage is the site which is defined in the activated account.

Cingular Video

Cingular Video brings you quick, on-demand access to crystal clear news, sports, weather and entertainment video clips. You can even personalize your homepage for quick access to your favorites. Look for the 3G network icon beside the signal bars on your phone to determine if you are in the Cingular Video coverage area. To access Cingular Video: 1. From standby mode, press the Left Soft Key to access the Menu. 2. Scroll to and select Cingular Video (option 6). 3. Select a category and play a clip.

My Stuff

Menu 7.1 ] Shop Games: This menu option connects to Cingulars game download site. ] Games List: You can see the default and downloaded games in the list.
Java is a technology developed by Sun Microsystems. Similar to the way you would download the Java Applet using the standard Netscape or MS Internet Explorer browsers, Java MIDIet can be downloaded using a WAP enabled phone. Depending on the service provider, Java based programs such as Java games can be downloaded and run on a phone. Once downloaded, the Java program can be viewed within the Games menu where you can select, execute or delete. Java program files saved in the phone are in.JAD and.JAR formats. n Note
The JAR file is a compressed format of the Java program and the JAD file is a description file that includes all detailed information. From the network, prior to download, you can view all detailed file descriptions from the JAD file.

Applications

Menu 7.2
This menu displays the list of Java programs downloaded using WAP. All previous downloaded programs can be selected, deleted, or viewed in detail within the Application menu. ] Shop Applications: This menu option connects to Cingulars application download site. ] Applications List: You can see the downloaded games and MobiTV in the list.

When you enter this menu a calendar will be displayed. The square cursor is used to locate a particular day. The bottom bar on the calendar indicates schedule(s) for that day. This function helps to remind you of the schedule. The phone will sound an alarm tone if it has been set for a specific schedule item. Key up/down navigation key left/right navigation key key/ key/ key key Description Weekly Daily Annually Monthly
] Go to Date: Allows you to jump to a specific date. ] Delete Schedules: Deletes the defined schedules such as Old Schedules, Daily, Weekly, Monthly or All Schedules.

Notepad (Menu 7.6.3)

You can create up to a maximum of 30 memos. 1. Select a memo pad you want to edit. 2. Press the left soft key [New] to create a new memo. 3. Input the memo and press the center key [Save] to save.

Calculator (Menu 7.6.4)

The calculator function allows you to add, subtract, multiply and divide. You can input numbers using the number keys, and input operators using the up, down, left, and right navigation keys. You can input a decimal point by pressing the [Star] key. Whenever you press the key, characters are sequentially deleted in reverse order.
The following [Options] are available: ] Search: Allows you to search the saved schedule(s) by pressing the character keys. ] Delete: Allows you to delete the selected schedule. ] Send via: Sends the selected schedule by Message or Bluetooth. ] Set Holiday: Allows you to set your personal holiday for the selected date. ] View All: Allows you to view all saved schedules.
Tip Calculator (Menu 7.6.5)
This feature allows you to quickly and easily calculate the tip amount based on the total bill as well as the split of the total bill based on the number of people.
The following [Options] are available in the Task list. ] Status: Allows you to change the status of the selected task as In Progress or Completed. ] Delete: Deletes the selected task. ] Send Via: Enables the selected task to be sent via Message and Bluetooth. ] Edit: Allows you to edit a saved task. ] View Calendar: The calendar pop-up window is displayed. ] Delete Tasks: Deletes All Completed, All Past Tasks or All Tasks.

We recommend that your phone and the Bluetooth device you are communicating with be no more than 10 metres apart. The connection may be improved if there are no solid objects in between your phone and the other Bluetooth device. 70
Bluetooth On/Off (Menu 9.3.1)
This menu sets the Bluetooth on or off using the navigation key.

Device List (Menu 9.3.2)

This function allows you to view the list of all devices that are paired with your phone at once. To add a new device, press the left soft key [New] 1. Select the [New] key to search the device that can be connected and which is within range. 2. If you want to stop searching, press the right soft key [Cancel]. 3. All of the devices found are displayed in the pop-up menu. Select the desired device by pressing the OK key, and entering the password.
Bluetooth Files (Menu 9.3.3)
This option enables you to view a list of saved application files downloaded via Bluetooth. You can add an application file stored in your phone and memory card.
Bluetooth Settings (Menu 9.3.4)
This menu allows you to configure the profile for a Bluetooth. ] My Visibility 1. Selecting the Show option exposes your phone to other Bluetooth devices. 2. Selecting Hide shows your phone only to already paired devices. ] My Name: Allows you to change the handset's name that can be seen by other Bluetooth devices. ] My Address: You can check your Bluetooth address. You cannot change the default setting. ] Primary Storage: You can assign the primary storage to Handset Memory or Memory Card.

Date & Time

Set Date (Menu 9.4.1)

Menu 9.4

This allows you to enter the day, month and year. You can change the date format via the Date Format menu option.

Date Format (Menu 9.4.2)

MM/DD/YYYY(month/day/year) DD/MM/YYYY(day/month/year) YYYY/MM/DD(year/month/day)

Set Time (Menu 9.4.3)

This allows you to enter the current time. You can choose the time format via the Time Format menu option.

Time Format (Menu 9.4.4)

12 Hours/24 Hours

Auto Update (Menu 9.4.5)

Select On to set the phone to automatically update the time and date according to the current local time zone.
Call Forwarding (Menu 9.5.1)

Menu 9.5

Send My Number (Menu 9.5.2)
This network service allows you to set your phone number to be displayed On or hidden Off from the person you are calling. You can select Set by Network if you prefer to have different settings for different service providers.
When this network service is activated, you can direct your incoming calls to another number, for example, to your voice mailbox number. For details, contact your service provider. Select one of the divert options, for example, select If busy to divert voice calls when your number is busy or when you reject incoming calls. The following options are available: ] All Voice Calls: Diverts voice calls unconditionally. ] If Busy: Diverts voice calls when the phone is in use. ] If No Answer: Diverts voice calls which you do not answer. ] If Out of Reach: Diverts voice calls when the phone is switched off or out of coverage. ] All Data Calls: Diverts to a number with a PC connection unconditionally. ] All Fax Calls: Diverts to a number with a fax connection unconditionally.

Auto Redial (Menu 9.5.3)

Select On, your phone redials the number you're trying to call up to 10 times after you hear a quick, engaged signal. Press [END] to stop the call attempts. This feature attempts to redial numbers that are engaged due to the wireless network. It does not redial numbers to an engaged party. n Note
There will be no alert indicating the call has been connected. You must stay on the line to hear when the call is connected.

Answer Mode (Menu 9.5.4)

This allows you to determine how to answer the phone. ] Any Key: You can answer an incoming call by pressing any key, except the [END] key.
] Send Key Only: You can only answer an incoming call by pressing the [SEND] key. ] Flip Open: When the phone rings, you can answer a call simply by opening the flip.
Minute Minder (Menu 9.5.5)
This option allows you to specify whether the phone will beep every minute during an outgoing call to keep you informed of the length of the call.
] Reject on List: Configures conditional call reject mode. Press the left soft key [New] to add the phone number to be rejected to the list. When you add a number to the list, you can add the number by entering it directly or by searching for the number in the Contact List.

TTY (Menu 9.5.8)

Allows you to attach a TTY device enabling you to communicate with parties also using a TTY device. A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY.

4. What are the results of the research done already? The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radiofrequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer causing chemicals so as to be pre-disposed to develop cancer in the absence of RF exposure. Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we dont know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years. 5. What research is needed to decide whether RF exposure from wireless phones poses a health risk? A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do- may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF

4. Using Unlock pattern

Set unlock pattern to secure your phone. On the home screen, touch Applications tab and select Settings>Location & security>Set up screen lock>Pattern. Follow the screens to be guided through drawing a screen unlock pattern. Select OK to continue to next screen. Opens a set of screens that guide you through drawing a screen unlock pattern. WARNING: Precautions to take when using the Pattern Lock. It is very important that you remember the unlock pattern you set. You have 5 opportunities to enter your unlock Pattern, PIN or Password. If you have used all 5 opportunities, you may attempt again after 30 seconds. When you cant recall your unlock Pattern, PIN, or Password: If you have setup a google account on the phone and failed to use the correct pattern 5 times. Then you are required to sign in with your google account to unlock your phone Google account to unlock your phone. If you haven't setup a google account on your phone or you have forgotten it, you need to perform a factory reset
*U R U p Tu an D tim p fa

If a u P a p

5. Using Hard Reset
* Using Hard Reset (Factory Reset) Use Hard Reset to initialise your phone to the original condition. Turn on the phone by pressing and holding Power + Home + Down volume key at the same time (for 10 seconds), the phone will turn on and perform factory reset immediately.
6. Connecting to Wi-Fi networks
Use Wi-Fi on your phone to access a wireless access point, or "hotspot". Some access points are open and you can simply connect to them. Others are hidden or implement other security features, so you must configure your phone so it can connect to them. Turn off Wi-Fi when you're not using it, to extend the life of your battery. To turn Wi-Fi on and connect to a Wi-Fi network 1 On the home screen, touch Applications tab and select Settings > Wireless & networks > Wi-Fi settings. 2 Touch Wi-Fi to turn it on and begin scan for available Wi-Fi networks. - List of available Wi-Fi networks are displayed. Secured networks are indicated by a lock icon. 7

WARNING

If you perform Hard Reset, all user applications and user data will be deleted. Please remember to back up any important data before performing Hard Reset.
3 Touch a network to connect to it. - If the network is open, you are prompted to confirm that you want to connect to that network by touching Connect. - If the network is secured, you're prompted to enter a password or other credentials. (Ask your network administrator for details.) 4 The Status bar displays icons that indicate Wi-Fi status. WARNING:

Do not insert or remove the memory card when the phone is on. Otherwise, it may damage the memory card as well as your phone, and the data stored on the memory card may be corrupted. To remove the memory card safely, On the Home screen, touch Applications tab and select Settings>SD Card & phone storage>Unmount SD card.

7. Using a microSD card

Pictures, along with Music and Video files, can only be saved to external memory. Before using the built-in camera, you need to insert a micro SD memory card to your phone first. Without inserting a memory card, you will not be able to save pictures and video.
8. Opening and Switching Applications
Multi-tasking is easy with Android because opened applications will keep running even when you open another application. Theres no need to quit an application before opening another. Android manages each application, stopping and starting them as needed, to ensure that idle applications dont consume resources unnecessarily.

TI Ap -

The tha mo aU cab fun you
To stop an application 1 On the home screen, touch Applications tab and select Settings > Applications > Manage applications Choose from either Downloaded, Running, All, or On SD card tabs. 2 Scroll and touch the desire application then touch Force stop to close the application. TIP Getting back to recent Apps - Press and hold Home key, then a screen will display a listing of the applications you used recently

9. LG PC Suite IV

The LG PC Suite IV is a program that helps you connect your mobile phone to a PC using a USB data communication cable, so that you can use the functions of the mobile phone on your PC.
Major Functions of the LG PC Suite IV Create, edit and delete phone data conveniently Synchronise data from PC & phone (Contacts, Calendar, Message(SMS), Bookmark,Call log) Transfer multimedia files (photos, videos, music) conveniently with a simple drag & drop between a PC and phone Use your phone as a Modem Installing LG PC Suite from your microSD memory card 1 Insert your microSD memory card on your phone. ( It may already be inserted on your phone.) 2 Before connecting the USB data cable, make sure that the Mass storage only mode is enabled on your phone. (On the applications menu, choose Settings > SD card 9
& phone storage, then select Mass storage only check box.) 3 Connect your phone through USB data cable to your PC. 4 In the status bar, drag down the USB icon. Touch Turn on USB storage button, then touch OK to confirm. You can view the mass storage content on your PC and transfer the files. 5 Run 'LGInstaller.exe' file from the USB mass storage.
"When LG PCSuite IV installation is completed, disable Mass storage only mode on the phone to run LG PCSuite" NOTE: Please do not remove or delete other program le installed on your memory card this may damage pre-installed application on the phone.

10. Connecting your phone to a computer via USB
LG-P500 does not support: - PC Connection via Bluetooth - LG Air Sync (Web Sync, R-Click) - OSP (On Screen Phone) - To-do in Calendar - Java Application User's guide for PC Suite IV is in the Help menu after installing PC Suite. 1 Use the USB cable with your phone to connect the phone to a USB port on your computer. You should recieve a notification that a USB device is connected. 2 Open the Notification drawer and touch USB connected. 3 Touch Mount to confirm that you want to transfer files between your phones microSD card and the computer.
Wh as an mic driv now mic

You unt wh turn pre

Not Sui Driv rem be

Tip you car can on Ca

When the phone is connected as USB storage, you receive a notification. You phones microSD card is mounted as a drive on your computer. You can now copy files to and from the microSD card.
To use the microSD card on the phone again, you need to turn off Mass Storage mode. Open the Notication drawer on your phone and touch "Turn off USB storage". To avoid losing information on the microSD card, carefully follow your computer's instructions to disconnect USB devices
11. Unlock screen when using data connection 1 Open the Notification drawer
Your display will go dark if untouched for a period of time when using data connection. To turn on your LCD screen, just press a hard key.
and touch Turn off USB storage. 2 Safely disconnect the USB device from your computer.
Note: When uninstalling PC Suite IV, USB and Bluetooth Drivers are not automatically removed. Therefore, they must be uninstalled manually.
Tip! While in Mass Storage mode, you can't access the microSD card from your phone. So you can't use applications that rely on the microSD card such as, Camera, Gallery, and Music.
12. Hold Phone straight up
Please hold the mobile phone straight up as a regular phone. While making/receiving calls or sending/receiving data, try to avoid holding the lower part of the phone where the antenna is located. It may affect call quality.

13. When Screen freezes

If the phone does not respond to user input or the screen freezes: Remove the battery, insert it again and power on the phone. If it still does not work, please contact the service center. NOTE: Do not connect your phone when you power on/off your PC.

Ho file

Con usi Tou bar US sto fold If y Pla nee For 'Tra sto
Sav the sto - Yo fr re re - If vi th fi 12
Before using the mobile phone, please read rst!
How to save music/video files to the phone
Connect your phone to the PC using the USB cable. Touch and drag down the status bar on the home screen. Select USB connected > Turn on USB storage > select OK >Open folder to view files. If you didn't install LG Android Platform Driver on your PC, you need set it manually. For more information, refer to 'Transferring files using mass storage devices'. Save music or video files from the PC to the phone's removable storage. - You may copy or move files from the PC to the phone's removable storage using a card reader. - If there is a subtitle file with the video file (smi or.srt file with the same name as the video file), place them in the same folder to display the subtitle automatically when playing the video file. - When downloading music or video files, copyright must be secured. Please note that a corrupted file or file with a wrong extension may cause damage to the phone.
How to play music/video files to the phone
Playing music files From home screen touch Application tab > Music. Locate the file you want to play from Artist, Albums, Songs, Playlists tabs Playing video files From home screen touch Application tab > Video player. , locate the file you want in the list and select it to play.
How to move the contacts from the old phone to the current phone
Export your contacts as a CSV file from your old phone to the PC using a PC sync program. 1 Select the Contacts icon. Press the Menu key then touch More > Import/Export > Import from SD card and select the vCard (vcf) file saved in the PC. 2 If the fields in the imported CSV file are different from the ones in Mobile Sync for Android, you need to map the fields. After mapping the fields, click OK. Then, the contacts are added in Mobile Sync for Android. 3 If the connection of LG-P500 phone (using the USB cable) is detected by Mobile Sync for Android, click "Sync" or "Sync contacts" to synchronize the contacts saved in the PC to your phone and save them.

How to send data from your phone via Bluetooth
Sending data via Bluetooth: You can send data via Bluetooth by running a corresponding application, not from Bluetooth menu, unlike regular mobile phones. NOTE: Check and make sure that Bluetooth is turned on before following steps below. * Sending pictures: Run the Gallery application and select the picture to send, press Menu key then touch Share > Bluetooth > Scan for devices > Choose the device you want to send data from the list.
*E C th ex S D it *S c a th k S to a a S d yo th * B sel che dev opt wa ser
* Exporting contacts: Run the Contacts application. Touch the address you want to export. Press Menu and Select Share > Bluetooth > Scan for Devices or choose the device if it has already been paired. * Sending multi-selected contacts: Run the "Contacts" application. To Select more than one contact press Menu key and touch Multiselect. Select the contacts you want to send or press Menu key and touch Select all to select all the contacts and > Touch Share > Bluetooth > Scan for devices > Choose the device you want to send data from the list. * Bluetooth settings. Then, select the Discoverable checkbox and search for other devices by scan for devices option. Find the service you want and connect to the FTP server. TIP: The Bluetooth version is 2.1 EDR and certified by Bluetooth SIG. It is compatible with other Bluetooth SIG certified devices. - If you want to search for this phone from other devices, From Application tab go to Settings>Wireless & networks>Bluetooth settings. Then, select the "Discoverable" checkbox. The checkbox is cleared after 120 seconds. - Supported profiles are SDAP, HFP, HSP, OPP, PBAP (server), A2DP, AVRCP, and DUN.

00 e) for ync e

> es nt
Getting to know your phone
To turn on the phone, press and hold Power key for 3 seconds. To Turn off the phone, press Power key for 3 seconds , touch Power Off and touch Ok.
Earpiece Power/Lock key - Powers your phone on/off by pressing and holding the key. - Turns off the screen and locks.

Formatting the memory card
Your memory card may already be formatted. If it isnt, you must format it before you can use it.
NOTE: All les on the card are deleted when you format the card. NOTE: If there is content on your memory card, the folder structure may be different after formatting since all the les will have been deleted. Tip! If your memory card is already Unmount, you can use the following step to format it. Touch Applications > Settings > SD card & phone storage > Format SD Card.
Wh cal turn the wh ear pre act cal
3 Close the slot protection.
Wh P50 loc pre sav Als for oth rep con - If ru p ru re p

Your Home screen

Proximity sensor
When receiving and making calls, this sensor automatically turns the backlight off and locks the touch keypad by sensing when the phone is near your ear. This extends battery life and prevents the touch keypad from activating unintentionally during calls. the lock mode to avoid unnecessary charges. (e.g., phone call, web access and data communications) Setting unlock pattern: You can draw your own unlock pattern by connecting four or more dots. After you have set an Unlock pattern; to unlock the phone, draw the pattern you set on the screen. Caution: The phone will be locked for 30 seconds after 5 incorrect attempts at drawing the unlock pattern. If you have forgotten your unlock pattern, you cannot unlock the phone. In this case a Factory Reset is required to unlock your phone. Your personal information and data will be deleted. To prevent unnecessary lose of personal data. You should set up your Gmail account on the phone before you set an Unlock pattern. Your Gmail account can be used to unlock your phone after 5 incorrect attempts. 21

y ust.

Lock your phone
When you are not using LGP500, Press the power key to lock your phone. This helps prevent accidental presses and saves battery power. Also, If you do not use the phone for a while, the home screen or other screen you are viewing, is replaced with the lock screen to conserve the battery. - If there are any programs running when you lock your phone, they may still be running in lock mode. It is recommended to exit all programs before entering

r ure g

Unlock screen
Whenever your LG-P500 is not in use, it will return to the lock screen. Touch the lock icon and drag your finger to the right to unlock the screen.
unlock your home screen or the last screen you were working

Home screen

Simply swipe your finger to the left or right to view them. You can also customise each panel with widgets, which are shortcuts to your favourite applications, folders and wallpapers.
NOTE: Some screen images may be different depending on your phone provider.

Ge ar ap

Tou The up you

The acr

Silent Mode From Notification drawer, touch Or if you don't use unlock pattern, simply drag to the left.
Tip! To add an application icon to home screen, touch and hold an application you want to add to home screen. Tip! To delete an application icon on the home screen, click and hold the shortcut icon you want to delete and drag to.
To wake up your phone, press Menu, Home, Back, Search or Power key. The lock screen will appear. Touch the lock icon and drag your finger to the right to 22

Tou dra Or, tou Not

Getting back to a recently used applications
Touch and hold the Home key. The screen will show you a pop up with icons of applications that you've used recently.
check and manage Wi-Fi, Bluetooth, GPS, 3G Connection, Silent mode status as well as other notifications.

Entering text

You can also enter text using the onscreen keyboard. The onscreen keyboard displays automatically on the screen when you need to enter text. To manually display the keyboard, simply touch a text field where you want to enter text. Phone Keypad Shift Key - Touch once to capitalize the next letter you type. Double-tap for all caps. XT9 Key - Turn on or off XT9 Mode. Setting key Number and Symbols Key Touch to change input to number and symbol entry. Enter Key Key Remove keypad from the screen. 23

Notification drawer

The notification drawer runs across the top of your screen.

n to an

Wi-Fi Bluetooth GPS

3G Ring connection

nt Touch and slide the notification drawer down with your finger. Or, on the home screen, touch Menu key and select Notifications. Here, you can
Delete Key Go forward or backword between letters. Tip! To switch between Qwerty Keypad and Phone Keypad, Touch and choose keypad Types.

Google Account Set-up

The first time you open the Google application on your phone, you will be required to sign in with your existing Google account. If you do not have a Google account, youre prompted to create one. IMPORTANT Some applications, such as Calendar, work only with the Google Account. If you plan to use more than one Google Account with your phone you have option to use more than one google account, When you sign in, your contacts, Gmail 24

mails, Calendar events, and other information from these applications and services on the web are synchronized with your phone. To set up a Gmail account on the phone: On Home screen, touch Applications tab and select Settings>Accounts & sync>Add account>Google Follow the prompts to set up your Gmail account

You and eas

c c o a
Answering and rejecting a call
When screen locked Drag the Answer icon to the right to answer an incoming call. Drag Decline icon to the left reject an incoming call. Drag the Excuse msg button up from the bottom if you want to send one.

v to a a w

Messaging
Your LG-P500 combines SMS and MMS into one intuitive, easy-to-use menu.
WARNING: The 160character limit may vary from country to country depending on how the SMS is coded and language. WARNING: If an image, video, or audio le is added to an SMS message, it will be automatically converted into an MMS message, and you will be charged accordingly.
Opening Email and the Accounts Screen
You can use the Email application to read email from services like Gmail. The Email application supports the following account types: POP3, IMAP and Exchange.

Social Networking

You can enjoy social networking and manage your micro-blogs on Facebook and Twitter on your phone. You can update your current status upload photos and view your friends status updates real-time. You can add your Facebook, Twitter to your phone.
NOTE: Additional costs may be incurred when connecting and using online services. Check your data charges with your network provider.

he all. eft he e e.

Camera
Getting to know the viewfinder
Brightness This defines and controls the amount of sunlight entering the image. Slide the brightness indicator along the bar, towards - for a lower brightness image, or towards + for a higher brightness image. Zoom Zoom in or zoom out. Alternatively you can use the side volume keys. Video mode Slide down this icon to switch to video mode. Taking a photo Gallery This enables you to access your saved photos from within the camera mode. Simply touch, and your gallery will appear on the screen.

Note: Listed application are based on LG recommendations and best suited for phone

OI File Manager

This file manager allows you to browse your SD card, create directories, rename, move, and delete files. 29

Taskiller

It is a tool to kill application runnings. - Click to select the application to kill - Long press to activate popup menu - Widget support How to Connect 1. Click on TasKiller. 2. Select the application to kill.

News and Weather

News and Weather app which provides both custom news and weather forcast for your region.

driv you app nav com

Layar Reality Browser, a beautiful fun augmented reality app that shows the things app that shows you the thing you cant see. It augments digital objects on top of reality, as can be seen through the mobile phone camera. When opening the app, youll be immediately presented with a list of spots nearby, have a go and experience your self.
Rea of b pho of e imp Com rea col boo
Note: Some application need to be run at background will appears with every launch of Taskiller. 30
Car Home for LG Android turns your LG phone into a better
Pho edi fille any the tec ide and effe pho
driving companion by providing you with quick access to key applications on the go: GPS navigation, voice-activated commands, contacts, and more.

AG Indian Newspaper

You can view Times of India, Manorama, The Hindu, Hindustan Times, Mathrubumi, The Economic Times, The Hindu, reutres IN, BBC Cricket, Rediff, Live MINT, Indian ExpressAND MANY MORE (+INTERNATIONAL PAPERS!)

iful t ws

Aldiko
Read and download thousand of books right on your Android phone. Browse huge catalogs of eBooks (mostly free) or import your own ePub files. Comfortable and customizable reading experience (font type, color, margin, night mode,etc.,) bookmarks, full text search.

PNR status checker

Find the PNR status from Indian Railways, just enter your PNR number and get the latest status.

be list d

Indian Music
Listen to unlimited songs from Hindi, Marathi, Pop, Ghazals, Bhajans, Bhangra, Remixes & Punjabi genres Search for songs, albums, playlist by name, actor, singer, year Listen to playlists created by you, your friends or anyone from Dhingana.com community Browse the complete music collection from the Dhingana.com 31

PhotoFunia

PhotoFunia is an online photo editing tool that gives you a fun filled experience. You upload any photo and just wait to see the magic. The proprietary technology automatically identifies the face in the photo and lets you add cool photo effects and create funny face photo montages

Bollywood Ji

Get the latest bollywood gossip, news, movies, reviews, and photos, Follow hindi, film star, like SRK, Salman khan, Amitab Bachan, Ranbir, Kareena, Priyanka, Bipasa Basu, Katrina Kaif, Aishwarya and more.

Shazam

Create music moments. With shazam you can identify music tracks, Store them and buy them plus you can learn more about the artist and connect to their Myspace page. Start your music Journey now.

T p p ti g a s a

Vaccine Tracker
An application to track the vaccination details of children. Provides features for Adding/ Deleting/Editing Child details for vaccination tracking Adding/ Deleting vaccine for tracking Display the total number of over due vaccines for a child.
How to Connect 1. Select the Shazam application. 2. Select Tag Now and place your phone near the Music Source. 3. Shazam will find the song for you and you can buy the song from web.

Dictionary

Search a word for: - Definitions - Related words - Example sentences Phrases Includes: - Search history in settings 32

PicSay

This application provides power full photo editing, where pictures and words balloons, titles, stickers and with a good set of effects etc can be altered or added to the image selected which is fun intuitive and easy to use interface.
How to Connect 1. Click on PicSay. 2. Select the image which you want to Add/Change effects. 3. Select Settings and choose relevant option you want to apply.

re to our

Movie Finder
Provides the movie running near your location along with the Showtime and trailer of the movie

Shop Savvy

The original barcode scanner on Android. Aim the camera at any barcode. Wait for the beep and shopsavvy will provide you with a list of online and local prices.
How to Connect 1. Select the ShopSavvy application. 2. Scan the barcode. 3. Search the product online.

Wikitude

Wikitude World browser shows real-time information in augmented reality displayed on an improved user interface and enrich with an enhanced search engine.

Wapedia

Wapedia is the fastest way to access the 3 million articles of wikipedia and many other wikis on your phone. Feature includes - Very fast, even on 2G networks - Featured Wikipedia content such as news - Alternative wikis - Search widgets - 150 wikipedia languages How to Connect 1. Select the Wapedia application. 2. Start Exploring the Information. 34

Com inst dire ma com cho

MS app clie
How to Connect 1. Select the Wapedia application. 2. Start exploring the near by places and information.

Sile sile &a

File bum pro be

AK wit MM set

Compass
Compass is a navigational instrument for determining direction relative to the Earths magnetic poles with multiple compass style and colors to choose from. MSN talk MSN Messenger application for Android as a Chat client Silent mode Turn on to silence all sounds, except media & alarms. File can be transferred by bumping the phones together provided current location should be set with the help of GPS AK Notepad: Similar to Memo with options to share via SMS/ MMS/Email/SNS /BT, and can set Reminder for notes

Foursquare

Foursquare helps you find the new ways to explore your city. See where your friends are and learn about the places they frequent and unlock rewards as you travel.

ed ce d

How to Connect 1. Select the Foursquare application. 2. Surf the places and know where are your friends and there frequent places.
TuneWiki is a social media player that shows subtitled lyrics as you listen to your music, watch music videos, search for lyrics to over 2.5 million songs.
Thi to r pro for Pow PD Tou Upl De opt dep

NOT wh ser con you

Pre opt

ThinkFree Office

ThinkFree Office allows you to read documents, and provides limited edit functions for Microsoft Word, Excel and PowerPoint. But You can not edit PDF file. Touch and hold a file, then Open, Upload, Rename, Move, Copy, Delete, Send and Properties options are available. This is depending on the file type.

Bookmark Add/Show Bookmark, show Most Visited Site and History. Windows Show all your open windows. Refresh Touch to refresh the web page. Forward Goes to the page you connected later than current page. This is opposite concept with Back key, which goes to the previous page.

The Web

The Web Browser
NOTE: Additional charges apply when connecting to these services and downloading content. Check data charges with your network provider.

Turn on Wi-Fi

From Home Screen , open Notification drawer and touch on. Or from Applications tab, touch Settings > Wireless & network > Wi-Fi.

Using options

Press the Menu key to view options. New window Open a new window.

To connect to Wi-Fi

Choose Wi-Fi network you want to connect. If you see , you need to enter password to connect. 37
TIP! If you are out of Wi-Fi area and choose 3G connection, additional charges may be applied.

Wi-Fi Tethering

Use your LG-P500 as portable Wi-Fi hotspot. Settings > Wireless & network > Tethering & portable hotspot > Portable Wi-Fi hotspot TIP! If your phone switch to sleep mode even when it is connected to Wi-Fi, the Wi-Fi connection will be disabled automatically. In this case, if your phone has access to 3G data, it may be connected to the 3G network automatically, and additional charges may be applied.)

USB tethering

You can share your phone's internet connection with your computer. You can tether your phone to your computer with a USB cable. Settings > Wireless & network settings > Tethering & portable hotspot > USB tethering For more information regarding USB tethering, click Help. TIP! To use USB Tethering, you need to install PC Suite on to your PC first.
LG upd For this http http ind lan Thi upd pho con wit ser As upd atte upd sur and ste not dat upg you

Phone Software update

LG Mobile Phone Software update from internet For more information on using this function, please visit the http://update.lgmobile.com or http://www.lg.com/common/ index.jsp select country and language. This Feature allows you to update the firmware of your phone to the latest version conveniently from the internet without the need to visit a service centre. As the mobile phone firmware update requires the users full attention for the duration of the update process, please make sure to check all instructions and notes that appear at each step before proceeding. Please note that removing the USB data cable or battery during the upgrade may seriously damage you mobile phone.

DivX Mobile

ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ONDEMAND: This DivX Certified device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to 320 x 240. DivX, DivX Certified and associated logos are trademarks of DivX, Inc. and are used under license. 39