LH-CX245Y.NA5HLLS-ENG

DVD/VCR COMBI RECEIVER Combi Receiver System

OWNERS MANUAL

MODEL: LH-CX245
(Main Unit: LH-CX245Y Speakers: LHS-CX245T, LHS-CX245W

CD-R/RW

Before connecting up, operating or repairing this product, please read this instruction booklet carefully and completely.

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
Warning: To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Warning: To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. Do not place objects filled with water such as vases, on the product.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS ECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. SERIAL NUMBER: You can find the serial number on the back of the unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. ______________________________ Serial No. ______________________________ Date of Purchase_________________________
Warning: This digital video disc player employs a laser system. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. Warning: To prevent direct exposure to laser beam, do not open the enclosure. Visible laser radiation when open. Warning: Never stare directly into the laser beam. Caution: Do not install this product in a confined space such as a book case or similar unit. This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. Notes on Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Contents

Introduction.4
Symbol Used in this Manual.4 About the Symbol Display.4 Notes on Discs.4 Handling Discs.4 Storing Discs.4 Cleaning Discs.4 Types of Playable Discs.5 Regional code.5 Disc-related terms.6 Front Panel.7 Display Window.8 Remote Control.9 Rear Panel.10 General Features.32 Moving to another TITLE.32 Moving to another CHAPTER/TRACK.32 Search.32 Changing the Audio Channel.32 Still Picture and Frame-by-Frame Playback.33 Slow Motion.33 Random.33 Repeat A-B.33 Repeat.33 3D Surround.33 Time Search.33 Zoom.34 Marker Search.34 Special DVD Features.34 Title Menu.34 Disc Menu.34 Camera Angle.34 Changing the Audio Language.34 Subtitles.34 Playing an Audio CD or MP3/WMA Disc.35 Audio CD and MP3 / WMA Disc Features.36 Pause.36 Moving to another Track.36 Repeat Track/All/Off.36 Search.36 Random.36 Repeat A-B.36 3D Surround.36 Programmed Playback.37 Repeat Programmed Tracks.37 Erasing a Track from Program List.37 Erasing the Complete Program List.37 Viewing a JPEG Disc.38 Slide Show.38 Still Picture.38 Moving to another File.38 Zoom.38 To rotate picture.38 To listen to MP3/WMA music watching picture.38 Speaker Setup.39 Playing a DVD VR format Disc.40 Maintenance and Service.40 Playing a DivX Movie Disc.41 Additional Features-VCR part.42-43 On Screen Display.42 Tape Counter Memory Stop.42 Friendly User Guide (Video Doctor).42 Hi-Fi Stereo Sound System.43 Wide Screen Compatibility 16:9.43 Additional Features.44 Last Scene Memory.44 Screen Saver.44 Video Mode Setting.44 Copying from DVD to VCR.45 Recording from another video recorder.45 Radio Operation.45 Presetting the Radio Stations.46 Listening to the Radio.46 To Clear the Stored Radio Stations.46 Tuning into a Station Manually.47 Tuning into a Station Automatically.47 RDS Operation.47

Installation and Setup.11
TV & Set Top Box (or another VCR Connections).11-12 Accessory Audio/Video (A/V) Connections to DVD/VCR Combi receiver.13 Radio Aerial Connections.13 Speaker System Connection.14 Speaker Positioning.15 Mini Glossary for Audio Stream & Surround mode.16 Sound Mode.16 Before Operation-VCR part.17-21 Tuning in a video channel on your TV.17 Using your receiver for the very first time.17 Setting the clock Manually.18 To set the colour system.18 How to use the main menu.19 Tuning in TV stations Automatically.19 Tuning in TV stations Manually.20 Changing the order of TV stations.21 Deleting TV stations.21 Before Operation-DVD part.22-27 On-Screen Display.22 Initial Settings.23-27 General Operation.23 LANGUAGE.23 Menu Language.23 Disc Audio / Subtitle / Menu.23 DISPLAY.24 TV Aspect.24 Display Mode.24 Progressive Scan.24 TV Output Select.25 AUDIO.25 5.1 Speaker Setup.25 Dynamic Range Control (DRC).25 Vocal.25 OTHERS.26 PBC.26 Auto Play.26 DivX(R) VOD.26 LOCK (Parental Control).27 Rating.27 Password (Security Code).27 Country Code.27

Operation.27

Playing a tape.27-31 CM (Commercial Message) Skip.27 OPR (Optimum Picture Response).27 Instant Timer Recording (ITR).28 ShowView Programming.29 Timer recording using On Screen Display.30 If Timer record events Overlap.31 Change (Deleting) the Timer Programme.31 Playing a DVD or Video CD.32-34

Reference.48

Language Codes.48 Country Codes.48 Troubleshooting.49-50 Specification.51-52

Introduction

To ensure proper use of this product, please read this owners manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location.

About the

Symbol Display
may appear on your TV display during operation and indicates that the function explained in this owners manual is not available on that specific DVD video disc.

Notes on Discs

Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
Symbol Used in this Manual
The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of electric shock. The exclamation point alerts you to the presence of important operating and maintenance / servicing instructions. Indicates hazards likely to cause harm to the unit itself or other material damage.
Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.

Installation and Setup

TV & Set Top Box (or another VCR Connections)
TV & Set Top Box (or another VCR) Decoder (or another VCR)

SCART INPUT

S-VIDEO INPUT

AERIAL

Rear of TV
Make one of the following connections, depending on the capabilities of your existing equipment. Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/VCR Combi receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution Make sure the DVD/VCR Combi receiver is connected directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/VCR Combi receiver to TV via your DVD/VCR Combi receiver. The DVD image could be distorted by the copy protection system.

Basic connections (RF)

1. Connect the aerial cable (A) from your indoor/ outdoor aerial to ANT.IN jack on the rear panel of DVD/VCR Combi receiver. 2. Connect the supplied RF cable (R) from the RF. OUT jack on the rear panel of DVD+VCR Receiver to your televisions Aerial Input.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD/VCR Combi receiver to the S-VIDEO IN jack on the TV using the S-Video cable (S). Notes The signal of S-VIDEO OUT jack will output only when the function mode is selected to CD/DVD. When you connect the DVD/VCR Combi receiver to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.

Basic connections (AV)

1. Connect the EURO AV1 AUDIO/VIDEO on the rear panel of the DVD/VCR Combi receiver to the scart input socket on the TV using a SCART lead (E). 2. You can connect such a Set Top Box (or another VCR) to the DVD/VCR Combi receiver (D).
Progressive Scan (ColorStream pro) connection
Connect the EURO AV1 AUDIO/VIDEO socket on the DVD/VCR Combi receiver to the COMPONENT VIDEO INPUT(Y Pb Pr) jacks on the TV using the SCART to RCA cable (Optional). If your television is a high-definition or digital ready television, you may take advantage of the DVD/VCR Combi receiver progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD/VCR Combi receiver. Notes:
Set the Progressive Mode to On on the setup

VIDEO INPUT

COMPONENT VIDEO / PROGRESSIVE SCAN INPUT
menu for progressive signal, see page 24.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that NO DISC is displayed on the display window. 2) Press STOP and hold it for five seconds before releasing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor.

B CH NL P

D DK E F I S SF OTHERS
2. Press OK to start the automatic storing of the channels of the TV stations in your area.

01 CPR-01

7. Press PROG. + or - to select another video channel. You may select any channel number between 22 and 68. You can also set it to OFF if there is any interference when your TV is connected to the DVD/VCR Combi receiver with a SCART lead.
Setting the clock Manually
The clock in your DVD/VCR Combi receiver controls time and date settings for your DVD/VCR Combi receiver. 1. Press i. Press 1 or 2 to select TIME DATE. Press OK.

To set the colour system

1. Press i. 2. The main menu will appear on the TV screen. 3. Press 1 or 2 to select the SYSTEM and press OK. 4. Press 3 or 4 to select according to the COLOUR system used.

HH MM -- : - -

DD MM YY --. --. --
--Pr-12 AUTO TIME ACMS DATE PAL NIC MESECAM

TIME DATE

f OSD ON OFF

SYSTEM

16:9 4:3 OPR
2. Use the numbered buttons on the remote control to alter the HOURS, MINUTES, DAY, MONTH and YEAR. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. The day of the week will appear automatically when you enter the year.
5. Press 1 or 2 to select the RF AUDIO. Press 3 or 4 to select according to the RF AUDIO used.
RF PSET I/I TIME SYSR RF ACMS DATE TEM B/G

16:9 4:3

RF D/K

HH MN 8 : 00

DD MM YY 1. 01. 04
6. Press i to remove the menus from the TV screen. 3. If you make a mistake press 1 or 2 and enter the correct details. 4. Press i.

How to use the main menu

This DVD/VCR Combi receiver can easily be programmed by using the menus displayed on screen. The menus are controlled from the Remote Control Handset. 1. Switch on your TV set and DVD/VCR Combi receiver by pressing the POWER button. 2. Press i button. The main menu will appear on the TV screen.
Tuning in TV Stations Automatically
If the TV broadcast signal is weak your DVD/VCR Combi receiver may not detect the necessary information and will not be able to store them correctly. To overcome this problem please turn to the MANUAL TUNING section on page 20.
1. Press POWER to turn on your DVD/VCR Combi receiver. 2. Press i button. The main menu will appear on the TV screen. Press 1 or 2 to select the ACMS. Press OK.

ON OFF

Timer recording setting (see p. 30).

PR SET

ON OFF 16:9 4:3
Manual tuning setting (see p. 20).
ACMS (Automatic Channel Memory System) (see right column). TIME DATE Date & clock setting (see p. 18). SYSTEM To set the Colour TV System (see p. 18). Dr. To check a problem with your DVD/CD/VCR receiver (see p. 42). fOSD ON/OFF To display the operational mode of your DVD/VCR Combi receiverr (see p. 42). 16:9/4:3 To select the aspect ratio of your TV (see p. 43). OPR To improve the playback picture (see p. 27). NIC To activate or deactivate the NICAM digital sound (see p. 43).
3. Press 1 or 2 to select COUNTRY. (A:Austria, B:Belgium, CH:Switzerland, D:Germany, DK:Denmark, E:Spain, F:France, I:Italy, N:Norway, NL:Nertherlands, P:Portugal, S:Sweden, SF:Finland, OTHERS) Press OK again to start the automatic tuning process.
03 C02 C03 CPR-01 PR-02 PR-03
Tip: You can change the menu language on the DVD setup menu. (See the Menu Language on page 23.) 3. Press 1 or 2 to select the desired menu. Press OK and press 3 or 4 to select. 5. Press i to return to a TV picture.
4. Press i to remove the menus from the TV screen. Press i to save your settings.
C02 C03 C04 C05 C06 C07 C08 C09

MOVE : DELETE :

PR-01 PR-02 PR-03 PR-04 PR-05 PR-06 PR-07 PR-08

, OK i

Tuning in TV Stations Manually
In certain areas of the country broadcast signals may be too weak for your DVD/VCR Combi receiver automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations manually in order for your DVD/VCR Combi receiver to store them. 1. Press i. The main menu will appear on the TV screen. Press 1 or 2 to select the PR SET. Press OK.
5. Press 2 to select STATION so that you may name your TV station. Press OK. The TV station name list will appear.
TNT MTV3 NELON TRT RTL4 TELEC RETEA RETE4

CH C10

MFT 00
6. Press D or E to select a station name from the list. Press OK to select it. If your station name isnt on the list do not press OK, but go to stage 7.

CH C 02

STATION PR-01

CHANNEL/CABLE : AV

2. Press i. The station table will appear. Press 3 or 4 to select the programme number that you want to tune (for example, PR 09).

PR PR-01 ------DATE -------TIME - : - - ~ - -: - : - - ~ - -: - : - -~- - : - : - -~- - : - : - -~- - : - : - -~- - : - : - -~- - : SP SP SP SP SP SP SP
8. Check that the timer event details are correct. Press i twice. If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. Press POWER to switch your DVD/VCR Combi receiver Standby. will appear in the display window while your DVD/VCR Combi receiver waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. 9. Press STOP to end recording. Notes If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press 3 or 4 to select the event that you wish to delete or change. Press 1 to delete the event.or Press OK to change; then press 1 or 2 to select; Station, Date, Start and End times and LP. Press 3 or 4 to enter the correct information. If Timer record events Overlap. Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is programmed to start at 16:00 and end at 17:00. Programme 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.)
5. Press the numbered buttons to enter the date of the programme. If you press OK before entering the date you may select one of the following automated recording features. Press 1 or 2 to select, then press OK to confirm. DLY To record every day (except Saturday and Sunday) at the same time. SU~SA To record at the same time every week.
PR DATE T I M E - - : - - ~ - -: - PR---- - : - - ~ - -: - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - --- - : - -~- - : - DLY SU MO TU WE TH FR SP SP SP SP SP SP SP SA OK i
If Timer record events Overlap.

When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: Press. or > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press. twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISPLAY and press v / V to select the chapter/track icon. Then, input the chapter/track number or use b / B.
Use the number buttons to select the track you want to view and press RETURN to return to the menu screen. Menu settings and operating procedures may differ. Follow the instructions on the each menu screen. You also may set PBC to Off (See PBC on page 25). Notes: If parental control is set and the disc is not within the rating settings you must input the password. (See Lock Menu on page 26.) DVDs may have a region code. Your player does not play discs that have a region code different from your player. The region code for this player is 2 (two). To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode.

Search

1. Press and hold. or > for about two seconds during playback. The player will now go into SEARCH mode. 2. Press and hold. or > repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). 3. To exit SEARCH mode, press PLAY. Changing the Audio Channel
Press AUDIO repeatedly during playback to hear a different audio channel (Stereo, Left, or Right).
Still Picture and Frame-by-Frame Playback

Repeat

1. Press PAUSE/STEP on the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. 2. To exit still motion mode, press PLAY. Slow Motion
You can play a title/chapter/all/track on a disc. Press REPEAT during playback to select a desired repeat mode. DVD Video Discs - Repeat Chapter/Title/Off Chapter: repeats the current chapter. Title: repeats the current title. Off : does not play repeatedly. Video CDs - Repeat Track/All/Off Track : repeats the current track All : repeats all the tracks on a disc. Off : does not play repeatedly. Notes: On a Video CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See PBC on page 25).
If you press > once during Repeat Chapter (Track)
1. Press PAUSE/STEP (X) during playback. The DVD/VCR Combi receiver will now go into PAUSE mode. 2. Press. or > during pause.

The player will enter SLOW mode.
Use the. or > to select the required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3. To exit Slow Motion mode, press PLAY. Note: Slow motion playback in reverse is not possible with Video CDs and DivX Discs. Random

VCD Karaoke DVD

playback, the repeat playback cancels. 3D Surround
1. Press RANDOM during playback or in stop mode. The unit automatically begins random playback and RANDOM appears on the TV screen. 2. Press RANDOM again to normal. Tip: By pressing. or > during Random playback, the unit selects another title (track) and resumes Random playback. Note:
On a Video CD with PBC, You must set PBC to Off on the setup menu to use the random function (See PBC on page 25).
To produce a 3D surround effect that simulates multichannel audio from two stereo speakers (instead of the five+ speakers normally required for multi-channel audio from a home theater system). 1. Press DISPLAY during playback. 2. Use 3 or 4 to select the sound option. The sound option will be highlighted. 3. Use 1 or 2 to to select 3D SUR. To turn off the 3D Surround effect, select Normal. Time Search
To start playing at any chosen time on the disc: 1. Press DISPLAY during playback. The time search box shows the elapsed playing time. 2. Press v / V to select the time clock icon and -:--:-- appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. 4. Press ENTER to confirm. Playback starts from the selected time.

Repeat A-B

To repeat a sequence. 1. Press A-B at your chosen starting point. A * appears briefly on the TV screen. 2. Press A-B again at your chosen end point. A B appears briefly on the TV screen and the repeat sequence begins. 3. Press A-B again to cancel.

Special DVD Features

Checking the contents of DVD discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press DISC MENU. Input the corresponding number or use the b B v V buttons to highlight your selection. Then press ENTER. Title Menu

Use zoom to enlarge the video image. 1. Press ZOOM during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture. 2. Each press of the ZOOM button changes the TV screen in the sequence: 100% size 400% size 1600% size screen fit mode 100% size Screen fit mode: You can change the way the image appears on the screen when youre playing a DVD movie. 4 Press 3/4 to select between Normal, Enhanced, and Maximum. 3. Use the b B v V buttons to move through the zoomed picture. 4. To resume normal playback, press ZOOM repeatedly or CLEAR button. Notes: Zoom may not work on some DVDs. Screen fit mode is available for playing the DVD disc, VR disc and movie file. Marker Search
1. Press TITLE. If the current title has a menu, the menu appears on the screen. Otherwise, the disc menu may appear. 2. The menu offers features such as camera angles, spoken language and subtitle options, and chapters for the title. 3. Press TITLE to exit. Disc Menu
Press DISC MENU and the disc menu is displayed. Press DISC MENU again to exit. Camera Angle
To enter a Marker You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers. To Recall or Clear a Marked Scene 1. During disc playback, press SEARCH. The marker search menu appears on the screen. 2. Within 10 seconds, press b / B to select a marker number that you want to recall or clear. 3. Press ENTER and playback starts from the marked scene. Or, press CLEAR and the marker number is erased from the list. 4. You can play any marker by inputting its number on the marker search menu.
If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select a desired angle. Note that the number of the current angle appears on the display. Changing the Audio Language
Press AUDIO repeatedly during playback to hear a different audio language or audio track. With DVD-RW discs recorded in VR mode that have both a main and a Bilingual audio channel, you can switch between Main (L), Bilingual (R), or a mix of both (Main + Bilingual) by pressing AUDIO. Subtitles
Press S-TITLE repeatedly during playback to see the different subtitle languages. Note: The subtitle file of the DivX file is displayed only smi, srt and sub. If there is no information or there is a code that can not read in the DivX file, 1 or etc. are displayed.
Playing an Audio CD or MP3/WMA Disc
The DVD/VCR Combi receiver can play MP3/WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs. Audio CD Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and playback starts.

AUDIO CD

0:52:07
Track1 Track2 Track3 Track4 Track5 Track6 Track7 Track8

Program

Clear All

PROGRAM Edit

MP3 / WMA disc compatibility with this player is limited as follows: Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than.mp3 /.wma. CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. File names should have a maximum of 8 letters and must incorporate an.mp3 or.wma extension. They should not contain special letters such as / ? * : < > l etc. The total number of files on the disc should be less than 650. This DVD player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
MP3 / WMA 1. Press v / V to select a folder, and press ENTER to see the folder contents. 2. Press v / V to select a track then press PLAY or ENTER. Playback starts.

0:00:00

1-Music1 2-Music2 3-Music3 4-Music4 5-Music5 6-Music6 7-Music7

DISPLAY Info

If you are in a file list on the MUSIC menu and want to return to the Folder list, use the v / V to highlight press ENTER. Press DISC MENU to move to the next page. On a CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word on top of the menu is highlighted. When playing a file containing information such as track titles, you can see the information by pressing DISPLAY. and
Audio CD and MP3 / WMA Disc Features

CD MP3 WMA

Random
1. Press RANDOM during playback or when playback is stopped. Random Playback begins immediately and RANDOM appears on the menu screen. 2. To return to normal playback, press RANDOM repeatedly until RANDOM disappears from the menu screen. Tip:
By pressing > during random playback, the unit selects another track and resumes random playback.
1. Press PAUSE/STEP during playback. 2. To return to playback, press PLAY, ENTER or press PAUSE/STEP again. Moving to another Track

Erasing a Track from Program List 1. Video CD : Press PROGRAM in the stop mode to enter Program Edit mode. 2. Press B to move to the Program list.
Track5 Track7 Track4 Track1

2-Music2

1-Music1 2-Music2 3-Music3 4-Music4 5-Music5 6-Music6
4-Music4 6-Music6 1-Music1

7-Music7

4. Press CLEAR. Repeat to erase additional tracks on the list. Erasing the Complete Program List 1. Follow steps 1-2 of Erasing a Track from Program List as above. 4 2. Use 3/4 to select Clear All, then press ENTER.
The complete Program for the disc will be erased.

Audio CD Menu

MP3/WMA Menu
Video CD: Press PROGRAM while playback is stopped. The program menu appears. Press PROGRAM to exit the menu. Note: On a Video CD with PBC, you must set PBC to Off on the setup menu to use the programmed playback (See PBC on page 25).

VIDEO CD

Track1 Track2 Track3 Track4 Track5
Note: The programs are also cleared when the disc is removed.
Track5 Track2 Track3 Track1
Video CD Menu 3. Select a track on the List, then press ENTER to place the selected track on the Program list. Repeat to place additional tracks on the list. 4. Press B. Select the track you want to start playing on the Program list. 5. Press PLAY or ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the Program list have played once. 6. To resume normal playback from programmed playback, select a track of CD (or MP3/WMA) list and then press PLAY.
3. Use v/V to select the track that you wish to erase from the Program list.

Viewing a JPEG Disc

Using this DVD/VCR Combi receiver you can view Kodak PICTURE CDs and discs with JPEG files. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen.
JPEG Folder 1 JPEG Folder 2 JPEG Folder 3 JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 JPEG Folder 8

Moving to another File

Press. or > once during viewing a picture to advance to the next file or to the previous file. Zoom
Use zoom to enlarge the photo image. (see 34 page)

Preview

To rotate picture

>>>

Speaker Setup

Make the following settings for the built-in 5.1 channel surround decoder. 1. Press SETUP. The setup menu appears. 2. Use v / V to select the AUDIO option then press B to move to the second level. 3. Use v / V to select the Speaker Setup option then press B to move to the third level. Select is highlighted. 4. Press ENTER and 5.1 Speaker Setup menu appears.
Speaker Size Volume Distance Test
Front L Large 0 0.6(2) Off dB m(ft)

Return

5. Use b / B to select the desired speaker. 6. Adjust options using v / V / b / B buttons. 7. Press RETURN to return to the menu screen. Speaker selection Select a speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) Note: Certain speaker settings are prohibited by the Dolby Digital licensing agreement.
Since the speaker settings are fixed, you cannot change the settings. Volume Press b / B to adjust the output level of the selected speaker. (-6dB ~ 6dB) Distance
Playing a DVD VR format Disc
This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder. This unit will play DVD-RW discs recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray. The TITLE LIST menu appears on the TV screen.

DVD-VR

Maintenance and Service
Refer to the information in this chapter before contacting a service technician.

Handling the Unit

When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. since they leave marks on the surface.
2. Press v / V to select a track then press PLAY or ENTER and playback starts. 3. Press TITLE to move to the list menu. Note:
Unfinalized DVD-R/RW discs cannot be played in this player. Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player does not support these kinds of discs. What is CPRM? CPRM is a copy protection system (with scramble system) only allowing the recording of copy once broadcast programs. CPRM stands for Content Protection for Recordable Media. This play is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM.

Country Codes

Choose a country code from this list.
Country Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG CR HR CZ DK EC EG SV Country Ethiopia Fiji Finland France Germany Great Britain Greece Greenland Islands Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Code ET FJ FI FR DE GB GR GL HM HK HU IN ID IL IT JM JP KE KW LY LU Country Malaysia Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Paraguay Philippines Poland Portugal Romania Russian Federation Code MY MV MX MC MN MA NP NL AN NZ NG NO OM PK PA PY PH PL PT RO RU Country Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code SA SN SG SK SI ZA KR ES LK SE CH TW TH TR UG UA US UY UZ VN ZW
Check the following guide for the possible cause of a problem before contacting service. Symptom No power. The power is on, but the DVD/VCR Combi receiver does not work. No picture. Cause The power cord is disconnected. No disc is inserted. No tape is inserted. The TV is not set to receive DVD/VCR Combi receiver signal output. Correction Plug the power cord into the wall outlet securely. Insert a disc or tape. (Check that the disc or tape indicator in the display window is lit.) Select the appropriate video input mode on the TV so the picture from the DVD/VCR Combi receiver appears on the TV screen. Press the TV/VCR button on the remote control repeatedly to choose VCR mode. TV indicator disappears in the display window. Connect the video cable securely. Turn on the TV. Select the correct input mode on the audio receiver so you can listen to the sound from the DVD/VCR Combi receiver. Connect the audio cables securely. Turn on the equipment connected with the audio cables.
TV/VCR mode for DVD/VCR Combi receiver is set to TV.
The video cable is not connected securely. The connected TV power is turned off. No sound. The equipment connected with the audio cable is not set to receive DVD/VCR Combi receiver signal output. The audio cables are not connected securely. The power of the equipment connected with the audio cables is turned off. The digital audio output is set to the wrong position.
The playback picture is poor.
The disc is dirty. Tape heads are dirty. Tape is a rental or was recorded on another DVD/VCR Combi receiver.