Operating the video recorder
The Remote Control Handset
This video recorder is designed so that almost all of its functions can be controlled from the REMOTE CONTROL HANDSET. This must have a line of sight to the sensor on the front of the video recorder. It must be within an angle of 30 degrees either side of the centre. The maximum operating distance is about 7.5m (25 feet). Some functions can also be controlled with the controls on the FRONT PANEL of the video recorder.
POWER To switch the video recorder on and off. EJECT To eject a tape (see p 18). NUMBER BUTTONS: To select programme channels. To programme numeric information into On screen displays. LOCK To turn the LOCK function on/off (see p 33). Basic operation buttons;
P/STILL (see p 19, 23). REWIND/REVIEW (see p 20). PLAY (see p 19). FAST FORWARD/CUE (see p 20). STOP (see p 19). REC/ITR (see p 23 to 24).
TAPE SPEED SELECT (LP) To select the recording speed of the tape (see p 23). i (MENU) To display the on screen display (OSD) menu (see p 11). CURSORS (D, E, F, G)/PR(+/-)/TRK(+/-)
During OSD menu, for moving the cursor, selection bar up or down. Switches one channel programme up or down. During playback, tracking control. During still playback, adjusting vertical tremble. To adjust manual fine tune for receiving normal audio and picture (see p 13).
During OSD menu, for moving the cursor to the left or right. Adjust the playback speed (see p 21). To clear a data (see p 29). OK Confirms menu selection (see p 11). Calls the on screen display (see p 31). To switch the display on the TV screen between the current time, the tape counter (in h o u r s a n d m i n u t e s ) a n d t h e r e m a i n i n g t a p e v o l ume (see p 31). This function will only operate when a tape is loaded.
10 CLEAR the tape counter to zero (see p 31). To reset 11 ez REPEAT (see p 36). SKIP 12 CMfast forward picture search through 30 seconds of recording (see p 19). To
Control Buttons p 13 TV POWER: Turns on or(seethe 37) TV off TV.
TV PR +/: Selects TVs channel. TV VOL +/: Adjusts TVs volume. TV AV: Selects the TVs source.
14 AV input source for recording into tape (see p 23, 37). Select 15 TV/VCRbutton to; Set this
VCR: To monitor, view playback or view the video recorders tuner. TV: To watch TV or view another programme while recording one programme (see p 24).
SHOWVIEW 16 To display the(LV4787/LV4767/LV4747) programme menu for ShowView programming on the handset (see p 25 to 26).
17 ez POWER OFF (see p 36).

How to install batteries

The wireless remote control is powered by two AAA size batteries. Remove the battery compartment lid. (Lift it up while pressing the tap forward.)

Load the new batteries with their polarities ( the lid.
) aligned properly and replace
Do not use an old and a new battery together, and never use an alkaline battery with a manganese battery. If you do not intend to use the remote control unit for a long period of time, remove the batteries and store them in a cool, dry place.
The front of the Video Recorder LV4787/LV4981

LV4767/LV4765

LV4747/LV4745
To switch the video recorder on and off. (see p. 18).
9 FF 10 P/STILL to still picture (see p 19), during recording to Switches
pause (see p 23). PROG. (/) 11 Allows you to scan through memorized channels.
To stop the tape, or eject it from the video recorder (see p 18). VIDEO CASSETTE COMPARTMENT When a cassette is inserted loading is completed automatically. MULTI FUNCTION DISPLAY REMOTE CONTROL SENSOR To receive the signals from the remote control handset. REC/ITR Used to record and set the ITR (Instant Timer Recording) time (see p 23 to 24). REWIND To play the tape (see p 19).
12 AUDIO INPUT TERMINALS (L/R)audio source (see p 8). To record audio from an external
TERMINAL 13 VIDEO INPUTsignal from another video equipment (e.g. To receive a Camcorder) (see p 9).
Installing your video recorder
IMPORTANT! The guidance given on the next three pages in the most common forms of connection. However please check with your manufacturers instruction books for specific information. Make sure all connections are made with both your VCR and additional appliance unplugged from the mains to avoid damaging your equipment. Connecting a VCR using a SCART leads is one of the best ways to achieve optimum sound and picture quality from video-tape playback. If you own a stereo TV you will be able to enjoy stereo sound when playing a stereo video tape; you will be unable to enjoy this facility if you connected just a normal aerial lead.
Connecting to a TV & DECODER

Aerial (NOT SUPPLIED)

The quality of the sound and picture can be greatly influenced by the positioning, quality and state of repair of your external aerial.
Decoder (NOT SUPPLIED) Television (NOT SUPPLIED)

Rear view of your VCR

SORTIE AUDIO OUT ENTREE ANTENNE EURO AV2 L R DECODER G D

AUTO: for playing back wide-screen programmes as wide, normal programmes as normal. 4:3 : for recording and playback with a normal format. 16:9 : for recording and playback with a 16:9 Wide-screen format recording.
DECODER To use DECODER scart socket for the connection of a pay-TV decoder (see p 22). OPR To improve the playback picture (see p 20).

Storing TV stations

Up to 88 TV stations (88 channels) can be stored in the memory of this video recorder. These can be set automatically or manually.

Automatic tuning

To carry out Automatic tuning:
Turn on the TV and the video recorder (with the POWER button). Press the i button and select ACMS by using the cursor F and G buttons.

16:9 DECO4:3 DER

Press the OK button. Select the desired country with cursor F and G buttons. A: Austria, B: Belgium, CH: Switzerland, D: Deutsch, DK: Denmark, E: Spain, F: France, I: Italy, N: Norway, NL: Netherlands, P: Portugal, S: Sweden, SF: Finland, Others.
A B CH D DK E F I N NL P S SF OTHERS
Press the OK button to start the automatic storing of the channels of the TV stations in your area. The VCRs clock will be set automatically when automatic tuning has finished (LV4787/LV4767/ LV4747). If the clock is wrong please see Setting the video recorders clock manually on page 17.
After finishing the storing, the video recorder will sort the stations. Automatic channel tuning has been completed when the TV station table menu appears on the TV screen.

C03 C02 S40 S11 C02 ----

00 ARD 00 ZDF 00 WDRBRHR3 ---------------MOVE: OK i DELETE: ,
Press the i button to remove the menus from the TV screen.

Manual tuning

TV station Channel numbers and Station names can be stored manually.
Press the i button on the video recorder handset. The menu will appear on the TV screen.

TIME SYSDATE TEM

Use the cursor F and G buttons to select PR SET
C PSET Pr-12 TIME SYSACMS DATE TEM OSD R
f OSD ON 16:9 DECOOFF 4:3 DER OPR
Press the OK button to enter the manual tuning mode.

CH C- -

MFT --

STATION ----i

CHANNEL/CABLE : AV
Press the AV button to select the type of TV channels.
C for standard channels C02-C69. S for special channels (Cable) S01-S41.

CH S01

MFT 00

STATION

Enter the channel number that you wish to enter the station with number buttons or cursor D or E buttons.

CH S27

Use G button to select MFT and control the fine tuning of the station by pressing the cursor D and E buttons.
Use G button to select STATION.
Press the OK and select the cursor D and E buttons to select the station name from list. NOTE: Press the use G button to input the station name manually. 1) Enter the first letter of the station name by repeatedly pressing the cursor D and E buttons. 2) Now move the cursor with the G to the next position and write in the next letter of the station name. For corrections move back and forth with the F and G buttons. 3) When you have the station name as required press the OK button and i button.
ARD ZDF WDR 3 BR3 HR3 STATION N3 NDR3 SWF3
Press the OK button to select it.

STATION ARD

10 Press the i button.
The TV station table menu will be displayed.

S27 --------

00 -------MOVE: DELETE:
ARD ----------------------------,
11 End the station storing by pressing the i button.
Selecting stored TV stations
Stored TV stations can be selected in either of two ways.
Use the D and E buttons to move from one station to another. Enter the programme number with the number buttons, to select a station directly. You can enter the stations 1 to 9 with the one digit only. The channel will be selected at once. When the channel is changed, a screen display (of a seconds duration) gives the programme number, and if the broadcast is STEREO or BIL (Bilingual).
Moving the programme order of the TV station table menu
If you want to move the order of the TV stations you can easily do so as follows:
Press the i button on the remote control handset. The menu will appear on the TV screen. Select PR SET with the cursor F and G buttons and press the OK button.

CH C03

Press the i button. The TV station table menu will be displayed.

C03 C02 S11 S40 C02 ----

00 ARD 00 ZDF 00 WDR 3 BR00 HR3 ---------------MOVE: OK i DELETE: ,
Move the cursor down or up with the cursor D and E buttons to select the programme that you want to move to another position in the menu (for example Pr 03). Now you press the G button to select move.

00 ----

ARD ZDF WDR 3 BR3 HR3 ------------OK i
Move the cursor to place the cursor line at the position where to insert the selected programme (example Pr 04).
ARD ZDF BR3 WDR3 HR3 ------------OK i
Press the OK button. The selected station will be moved to the new programme number.
00 ARD 00 ZDF 00 BRWDR HR3 ---------------MOVE: OK i DELETE: ,
Move other stations, if you wish, by repeating steps 4 to 6. Press the i button to remove the menus from the TV screen.

Clearing stations from the TV station table menu
If you want to clear a TV station from the video recorders store you can easily do so as follows:
Move the cursor down or up with the cursor D and E button to select the programme that you want to clear. (for example station Pr - 04).
00 ARD 00 ZDF 00 WDR BRHR3 ---------------MOVE: OK i DELETE: ,
Press the F button to delete. After a short while, the selected station will be cleared.
CARD CZDF SWDR 3 SBR3 CHR3 ------------------PLEASE WAIT OK i DELETE: ,
Clear other stations, if you wish, by repeating steps 4 and 5. Press the i button to remove the menus from the TV screen.

Time and date setting

Setting the video recorders clock
The clock in this video recorder gives the date (including the day of the week) and the time. It is set automatically during Automatic Channel Tuning (LV4787/LV4767/ LV4747). It is also continually checked against the date and time if this information is being broadcast as it is by all channels broadcasting a Teletext signal (LV4787/LV4767/ LV4747). It is, therefore, unlikely that you will need to alter the clock settings. Whenever the video recorder receives a signal containing the date and time it adjusts itself to these signals (LV4787/LV4767/LV4747). Therefore, the video recorder clock is likely to be always showing the correct time (LV4787/LV4767/LV4747). To manually alter the clock:
Press the i button. The Main menu appears on the TV screen. Select TIME DATE with the cursor F and G buttons.
ON 16:9 DECOOFF 4:3 DER OPR
Press the OK button. The auto adjust mode can be set to OFF by pressing D and E buttons if you want to set the time

ADJUST :

manually (LV4787/LV4767/LV4747).

Press the OK button.

HH MM -- : - -

DD MM YY --. --. --

Use the number buttons or cursor D, E, F and G buttons alter the Hours, Minutes, Day, Month and Year (using the 24 hour clock). The day of the week will appear automatically when

HH MM 08 : 00

DD MM YY 1. 01. 04
you have entered the date. NOTE: Enter 1 as 01, 2 as 02 etc.
Correct errors during inputting with cursor F and G buttons.
Press the i button to remove the menus from the TV screen. The set time will appear on the video recorders Display.
Using the VCR to play back a tape
NOTE - Loading and unloading of a video cassette is only possible when the video recorder is plugged into a power source.
Loading & Unloading a video cassette
Insert the cassette into the video recorder with the window side up and the arrow pointing away from you. Do not attempt to insert a cassette which is upside down or back to front. Gently press the middle of the tape. Press the EJECT button, on either the handset or the front panel of the video recorder. The cassette compartment will open and the video cassette will be partially ejected. EJECT will appear for a few seconds on the TV screen. It is not necessary to switch on the video recorder, by pressing the POWER button before ejecting a video cassette.

Note - It is advisable to remove a video cassette from the video recorder when not in use. Rewind and unload it.

Types of video cassette

Use Video tapes in this video recorder. On SP (standard play) the maximum record and playback time is that given on the video cassette. For example E-180 will record/play back for 180 minutes. For example T-120 will play back for 120 minutes. On LP (long play) the maximum record and playback time is twice that given on the video cassette. For example E-180 will record/play back for 360 minutes. For example T-120 will play back for 240 minutes. Accidental erasure prevention - If you do not wish to record on a tape, and hence erase what is already recorded on it, then remove the safety tab on the back edge of the video cassette. Cover the hole with cellophane tape - It is possible to record on a video cassette from which the safety tab has been removed by covering the hole with cellophane tape. Refer to the instructions included with the video cassette for more information.
How to using the Energy saving mode
Your VCR has an Energy Save feature which if set will place your VCR onto an economic power save where the clock display will disappear. If you have programmed a recording, this feature will not work.
Press the Press the display.
button on the VCR. button on the VCR again and your VCR will go into
Energy Save. All the displays will be disappeared on the video recorders For releasing the energy saving mode, press the button once again.

Normal playback

Press the PLAY button to start playing a tape (called Normal playback). PLAY will appear for a few seconds on the TV screen.
Automatic tracking - The video recorder will automatically adjust the tracking to give the best quality picture. Standard Play (SP) or Long Play (LP) tape The video recorder will automatically recognise whether the tape has been recorded at normal speed (SP) or half-speed (Long Play - LP), and play it back at the correct speed. If it is a long play tape LP will be shown on the video recorders display. Automatic playback - If the video cassette has had its safety tab removed, so that it cannot be erased, then the video recorder will automatically start playing the tape.

OPR (Optimum Picture Response)
This feature automatically improves playback picture quality by adjusting your VCR to the condition of the tape.

PSET ACMS RSOFT

Press the i button to display the Main menu. Press the cursor F and G buttons to select the OPR. Press the OK button.

fSHARP OSD

ON 16:9 OFF 4:3

DECODER

Press D and E repeatedly to select OFF, SOFT or SHARP. NOTE: This feature can only be operated when playing a tape. Press the i button to release it.
Slow motion playback, Shuttle
This video recorder is equipped with a slow motion and shuttle features.
During playing back or still picture press the cursor F or G button. You can reach the following playback speeds: (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) If distortions can be seen in the picture, remove them with the cursor D and E buttons. To switch off the slow motion, press the desired function, e.g. playback, search, still picture or stop.
The slow motion playback will only continue for about 30 seconds, after which the video recorder will return to normal playback mode, to avoid damage of the tape. When using the special playback effects (logic, picture search, still and slow motion playback) with a tape recorded in LP, there will be a loss of colour and there may be noise bars on the picture. Note: During Slow or Still playback, the noise bars can be appeared on the picture according to status of tape (especially NTSC recorded tape). In these cases adjust the tracking to playback a tape with the optimum picture quality. You can adjust the tracking with the cursor D and E buttons.
Selection of the colour system
Because your video recorder is equipped with dual colour standard, you can playback recordings in PAL B/G and SECAM B/G. During playback your video recorder detects the recorded colour system automatically. Only if there are colour problems with very weak recordings, you should select the colour system manually:
Press the i button to display the Main menu.
Press the cursor F and G buttons to select the SYSTEM.

TIME ACMS DATE

f OSD ON OFF

TIME SYSAUTO DATE TEM

ON OFF 16:9 4:3
AB C OSD Dr. PAL MESECAM DECO1 2
Use the cursor D and E buttons to select the desired colour system. AUTO: automatic colour selection, PAL: PAL recordings MESECAM: MESECAM recordings

Recording with decoder

We have already described, how to connect a decoder for pay-TV stations like PREMIERE on page 7.
Press the i button and select the DECODER with the cursor F and G buttons. Press the OK button and select to ON by

Immediate timer (ITR)

When making a recording you can set your video recorder to stop after a set period of time.
Press the REC/ITR button to start recording. Press the REC/ITR button several times until the desired recording time is shown on the video recorders Display.
Each time you press this button the ITR time will be extended by 30 minutes. The maximum time that can be set is 9 hours. When the ITR recording have been completed, the video recorder will stop and switch itself off.
To cancel a ITR recording, press the POWER or the STOP button.
Programming the video recorder timer
The timer allows you to record broadcasts automatically. Up to 7 recordings within one month can be programmed at the same time.
Introduction to ShowView (LV4787/LV4767/LV4747)
ShowView programming lets you set the video recorder to record programmes, by simply entering a ShowView Code. These ShowView Codes are published in TV listings in almost all newspapers and TV Guides. They can vary from one to eleven digits and are usually with the programme name as shown in the sample page of a TV Guide. The ShowView Codes contain all the information needed by the video recorder (programme start and stop date and time and programme number). It is easy to alter the information programmed into the video recorder by a ShowView Code if you wish to do so. For example you may wish to extend the stop time in case the programme is running late. SHOWVIEW is a registered trademark of Gemstar Development Corporation. The S HOWV IEW System is manufactured under licence from Gemstar Development Corporation.
18.55 RTL 2 Nachrichten 9-811-065 19.00 Tierdokumentation, 251-317 19.30 Bitte lcheln 856-152 22.35 Der Pate von 7-073-959
ShowView programming on the TV screen (LV4787/LV4767/LV4747)
These new timer programming feature is very easy to use:
Press the SHOWVIEW button. The SHOWVIEW menu appears.

SHOWVIEW NO.

-------- -
Select the recording type by repeatedly pressing the D and E buttons. It select between: ONCE: To record a programme once only. DAILY: To record a programme every day (except Saturday and Sunday) at the same time. WEEKLY: To record a programme at the same time every week.
Use the number buttons to enter the ShowView number of the broadcast you want to record, exactly as it is shown in your TV magazine.
If you enter incorrect number, press the F button to erase it, and enter the correct number.

Press the OK button. You will see the data of the selected broadcasts.
PR ARD ZDF -----DATE 2 ----TIME 13 : 00~14 : : 30~20 : : 00~20 : 30 - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - LP LP SP SP SP SP SP
If PLEASE CHECK appears, you have to check the entering and repeat the procedure. If - - is displayed, you have to enter the programme number of the station, you want to record from. This will automatically be stored in an internal SHOWVIEW channel map.
If you want to record from either of the EURO SCART sockets or from either of the AUDIO/VIDEO input terminals, repeatedly press the AV button for the correct display.
If you wish to change any of the settings as displayed you can do so. Move between them with the cursor F and G buttons. Use the number buttons to change the date and the time.
PR ARD ZDF BR3 ----DATE 2 ----TIME 13 : 00~14 : : 30~20 : : 00~20 : 30 - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - LP LP SP SP SP SP SP
to select the recording speed. Press
to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program.
Finish your timer inputs with the i button. A menu of the timer programmes set into the video recorder will be displayed on the TV screen.
If PLEASE CHECK is displayed, you have entered a wrong data. Please correct the data.
Press the i button to remove the menus from the TV screen. Make sure that there is a video cassette in the video recorder and turn the video recorder off with the POWER button. The timer set TIMER symbol is shown on the video recorder.
NOTE: Timer recordings do not work during power on mode.
Recorder timer programming using the On Screen Displays
Without the ShowView code you need to enter the programme number, date, and the start and stop times of the programme you wish to record.
Press the i button and select REC with the cursor F and G buttons.
Press the OK button to enter the timer programming mode.
PR -------DATE -------TIME - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - DELETE: DELETE:

SP SP SP SP SP SP SP

Press the OK button and select the programme number that you wish to record using the number buttons. Programme number and dates 1 must be entered as 01, 2 as 02 etc.
PR ARD ------DATE -------TIME - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - SP SP SP SP SP SP SP

If you want to record from either the EURO SCART sockets or from the AUDIO/VIDEO input terminals, repeatedly press the AV button for the correct display.
Press the G button and enter the day using the number buttons. If you want to change recording type: 1) Press the OK button.
PR ARD ------DATE 15 ------TIME - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - SP SP SP SP SP SP SP
DLY: for daily recordings from Monday to Friday. Weekly (SUN to SAT): To record a programme at the same time every week.
PR DATE ARD 15 ------------DLY SU MO TIME - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - TU WE TH FR SP SP SP SP SP SP SP SA
2) Select the recording type with the cursor F and G buttons and select it with the OK button.
Enter the start and end times using the number buttons.
For setting programme times you must use the 24 hour clock. Errors can be corrected with the F and G buttons.

PR ARD -------

DATE 15 -------
TIME - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - - - : - - ~ - -: - -
Press the i button to remove the menus from the TV screen. Make sure that there is a video cassette in the video recorder and switch the video recorder off with the POWER button. The timer set TIMER symbol is shown on the video recorder.
Checking and clearing stored timer programmes.
The stored timer programmes can easily be viewed on the TV screen, and can also be cleared if not wanted.
Press the i button and select REC with the cursor F and G buttons. Press the OK button. The timer programmes list will be displayed on the TV screen.
If you wish clear any of the programmes on the list, select it with the cursor D and E buttons, and press the F button to clear. If you wish change any of the data for any of the programmes on the list, select it with the cursor D and E buttons. Then, press the OK button and change the data as described on previous page.
Press the i button twice to remove the menus from the TV screen.
Overlapping timer programmes.
When timer programmes overlap, the programme which is already recording continues to its scheduled end time. Hence the beginning of the second programme will not be recorded. NOTE - If you wish to stop a timer recording which has already started, press the POWER button. 14:30 PROGRAMME 1 PROGRAMME 2 (This portion will not be recorded) 14:00 15:00 15:30

Other features

Introduction
This video recorder has a number of other features which make it easier and more convenient to use. Some of these are described in this section of the manual. Later sections describe the connection of the video recorder to other equipment, and features relating on the video recorder. The features described here are:
The On Screen Display of the time or tape counter, date, programme channel and operation mode of the vide recorder. The Digital Tape Counter and Remaining Tape Volume indicator. The Memory Stop facility that can be used during rewind to stop the tape at a preset point. The tracking control that optimises the picture quality. The Automatic Playback facility which plays back a tape, rewinds and ejects it and switches off the video recorder. Automatic Memory Power Shut Off when a video cassette is rewound. A Child Lock facility so that the video recorder can be controlled only from the handset. The 16:9 wide-screen recording and playback. Self-diagnosis.
ON SCREEN DISPLAY OF THE TIME OR TAPE COUNTER, REMAINING TAPE VOLUME, DATE, PROGRAMME CHANNEL AND OPERATION MODE OF THE VIDEO RECORDER. When the OK button is pressed, a display occurs on the TV screen of the current time or the tape counter and the remaining tape volume, the date, year and day of the week, the programme channel and the operation mode of the video recorder. The tape counter and the volume of the tape remaining appear only while a tape is loaded. After two seconds the clock display or the tape counter and the volume of tape remaining will only remain. If you press the OK once again within two seconds the clock display changes to the tape counter and the volume of the tape remaining or vice versa. Press the OK button again to remove the display from the TV screen. Note - If a recording is taking place these On Screen displays will not be recorded onto the tape. DAY/MONTH/ YEAR/DAY OF THE WEEK Clock/Tape counter/Remaining Tape Volume 1. 01.04 THU 11:00 STOP SP ARD VCR RECORDER CHANNEL FUNCTION PROGRAMME
Digital Tape Counter/Remaining Tape Volume
The Digital Tape Counter and Remaining Tape Volume can be displayed on the TV screen instead of the time by repeatedly pressing the OK button. The Digital Tape Counter gives you the relative positions of recordings on the tape. If you set the counter to 0:00:00 at the beginning of a tape, you can note the counter reading at the beginning of each separate recording. To set the counter to M 0:00:00 press the CLEAR button.

The memory stop facility

Memory Stop automatically stops a tape when the tape counter is 0:00:00. This feature may be used to return the tape to a preselected position immediately after making a recording, or to repeatedly playback a portion of a tape.
Press the OK button to set the display to the counter. Before playback or recording, press the CLEAR button. The counter will read M 0:00:00. Begin the playback or recording. The tape counter gives the actual time in hours, minutes and seconds. Press the STOP button when playback or recording is completed. Press the REW button. The tape will rewind and automatically stop when the counter returns to M 0:00:00.

Tracking Controls

Tracking distortions show up as streaks or an unstable picture. This video recorder can set the tracking automatically. You can also set the tracking manually if you need to do so. Automatic tracking - The automatic tracking adjusts the tracking to playback a tape with the optimum picture quality. As soon as you start to playback a tape the tracking will be adjusted if necessary. Manual tracking - If the quality of the recording is poor, or if the tapes are damaged, the automatic tracking will not be able to work correctly. In these cases you will have to remove tracking distortions manually. You can adjust the tracking during playback with the cursor TRK + and - buttons. Press them repeatedly until the distortions have been eliminated. You can switch on the automatic tracking again after using the manual tracking feature by pressing the 0 button. When you change a video cassette, the automatic tracking will always be switched on again.

Automatic Playback

Automatic Playback is a very convenient automatic action of this video recorder. It occurs whenever you insert into the video recorder a video cassette from which the safety tab has been removed (e.g. a video cassette which you have hired). Automatic Playback carries out the following procedures: It automatically switches on the video recorders power and starts to playback the tape. At the end of the tape, it automatically rewinds. The tape is ejected automatically. The video recorder switches itself off.
Automatic Memory Power Shut-Off
This feature of the video recorder enables you to initiate switching off the video recorder during tape rewind. Hence you do not have to wait until a tape has rewound before you can switch the video recorder off. To activate Automatic Memory Power Shut Off press the POWER button during tape rewind. The tape will rewind to the beginning and the video recorder will switch itself off. Pressing any of the control buttons (e.g. POWER or PLAY) after setting Automatic Memory Power Shut Off will cancel it.

The Child Lock

The control buttons on the front of the video recorder are inoperative. The video recorder can be controlled only from the handset.

NOTES:

Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. If you enter a new code number, the code number previously entered will be erased. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

Specifications

General
Power Power consumption Video Head system Tape speed Tape format Maximum recording time Rewind time Dimensions (W X H X D) Weight Operating temperature Operating humidity Timer : 200-240V~, 50Hz. : Approx. 12 watts (Energy saving mode: 3 watts) : Double azimuth 4 heads, helical scanning system : 23.39 mm/sec (SP mode)/11.69 mm/sec (LP mode) : Tape width 1/2" (12.7 mm high density Video tape) : 4 hours in SP mode/8 hours in LP mode (with E-240 tape) : Approx. 65(10) sec. (with E-180 tape) : 14.2" X 3.2" X 9.1" (360 X 82 X 230 mm) : 2.87 kg : 41F-95F (5C-35C) : Less than 80 % : 24 hours display type
Television system Recording format RF reception RF OUT Input level Output level Signal to noise ratio RF modulator : CCIR standard (625 lines, 50 fields) PAL (B/G), SECAM (B/G) colour signal : PAL/MESECAM : PAL B/G, SECAM B/G : PAL G : VIDEO IN (SCART, RCA type) 1.0 Vp-p, 75 ohm, unbalanced : VIDEO OUT (SCART type) 1.0 Vp-p, 75 ohm, unbalanced : More than 43 dBm : UHF channels 22-68 (Adjustable)
Input level : AUDIO IN (SCART, RCA type) Scart type: -6.0 dBm, more than 10 k RCA type: -6.0 dBm, more than 47 k Output level : AUDIO OUT (SCART, RCA type) Scart type: -6.0 dBm, less than 1 k RCA type: -6.0 dBm, less than 1 k Audio track : Mono track & Hi-Fi track Hi-Fi: 20 Hz-20 kHz (-3/+3 dBm) Audio signal to noise ratio Audio dynamic range
Audio frequency response : Normal:100 Hz-10 kHz (-6/+3 dBm) : Normal audio: More than 43 dB (at SP mode) Hi-Fi audio: More than 70 dB (at SP mode) : Hi-Fi audio: More than 85 dB (at SP mode)
Design and specifications are subject to change without notice!
Before calling for service.
Please check to see if any problem which you may have with your video recorder is described here before taking it for service or calling a service engineer. Problem No mains power to the recorder Possible solution? Is the video recorder plugged into the mains? Is the mains supply on and switched on? Can you get a picture on the TV screen? If are not the aerial and RF lead connected? Are the TV channels properly tuned in? Has the safety tab been removed from the video cassette to prevent recording? Is POWER off?(Is the TIMER showing in the display?) Were the recording start and end times set correctly? Are the timer settings in the timer menu? Was the power interrupted after setting the timer? If so the time setting will be erased and timer recordings will not take place. Has the safety tab been removed from the video cassette? Are the TV channels properly tuned in? Try another video cassette. Can you minimise the noise bars to an acceptable level with the 0 or D and E buttons? Is the video cassette damaged? Try another one. Adjust the horizontal hold control on you TV set. Insure that you are using the video channel on your TV set example 0, 8, 9 or 12. Is the cassette compartment empty? Are you trying to insert the cassette the right way round? Switch AUDIO in the main menu to STEREO.

83,30 2,62 26,26 4,50 4,62 4,00 4,00 4,00 4,00 7,00 7,13 4,00 2.051,67 99,90 24,90 510,88 23,09 4,50 92,23 19,95 50,27 18,36 97,46 66,68 19,50 27,00 89,00 6,15 35,00 11,00 79,90 289,00 8,06 24,73 4,82 279,99 75,00 39,90 14,00 46,06 49,00 6,32 3,02 47,45 197,20 6,46 139,00 209,00 4,30 19,80 1,23
2348 VGA-Karte PCIe VGA512MB MSI NX8800GT-T2D512E-OC 2349 CD-R 800MB 90Min 10er-Pack 2350 VGA-Mon. TFT 15" AOC LM520 mit Lautsprecher VGA-Mon. TFT 19" Terra 4219 5ms VGA/DVI Lautsprecher Akku 1,2V 1000mAh NiCD Mignon zum lten Backlight TFT 275x2,0mm wei 2SA1015
VP35281 Farbendstufe Samsung WS32Z 308T 84cm 16:9 Slim-Bildrhre Monitor 19"TFT-LCD MT3219A1 15-25-31kHz Tintenpatr. Canon BCI24BK black IC-Fassung PLCC 44 Pol Kabel RJ12 - RJ12 15m VGA-Mon. TFT 20" Samsung 204TS SyncMaster TDA16846 LM1295N Ritter ALLESSCHNEIDER Blau Toner Brother TN6300 fr HL 1030/1230-1270/8360P ca.3000Seiten Siemens Gigaset C45 Mobilteil inkl.Ladeschale Netzladegert ASTPN3210 Nokia 3210/3310/8210/8850/8310 ACP-7Eorig. Akku 1,2V 2700mAh Ansmann Schnell-Ladefhig 2SC3782 Polo /3 17" 15kHz Tintenkopf BC23bk = 0897A002 CD-Tasche 96 CD`s Stoff Euronetzkabel 2m LNC Single Monoblock Astra/Hotbird Energieregler NEFF Chinchkabel 0,5m 4x St. STR50330 Eberle FTR-E 3121 Frostwchter TBA950-2 Frontpanel 5,25" mit 3xKlinkeku., Kopfhrer und TV, 2xUSB, 2xeSATA, 147x92x42mm HR46161 = 5410640 FEA663 HR6216 Sicherung SMD ZTR Selti GTA3127 Monochrome Pioneer PDP4280XA 42"Plasma HDR 3HDMI incl.Fu+LS TIP3055 Transistor TIP2955 Transistor FMMT619 SMD Tintenkopf HP 51641a No.41 color 39ml H&H CTB 01 Chinch-Umschaltpult Notebook Asus A9RP-5B010H ZTR 1118736 FFS Universum FT4286 DVD +R 8,5GB 1er Platinum Double Layer Panasonic SC-PM33 EGS silber Micro Anlage CD-Tasche 72 CD`s VGA-Kabel SUN 13W3P St.-St. 1,8m Adapter 5-pol. DIN Stecker - 3,5mm Klinkenstecker VGA-Mon. TFT 17" Hanns HU171 DVI TCO99 ZTR FEA630 CTX HR7623 PC1379 Schalter Br Natischalter Samsung LE-32R51B 82cm LCD-ZV HD-ready 1366x768 LM2403T TDA8177F PA-Kabel - Kupplung Female/Female TFT Rackblende 19"-8HE fr 12,1"TFT Display
86,93 615,31 372,00 11,00 3,44 8,21 481,13 10,92 39,27 32,73 58,00 82,01 11,19 4,00 7,70 292,38 35,00 9,90 2,99 58,37 37,00 2,50 7,33 63,12 4,41 24,90 69,76 48,22 1,90 61,60 2.195,00 4,82 9,39 1,31 27,00 22,57 699,90 113,05 2,80 158,90 8,72 39,00 4,22 184,56 73,86 35,11 6,51 1,95 1.261,82 44,11 15,45 5,75 115,50
Akku 3,6V 650mAh LG C3320 Chassis Polo/2 20"S-VGA Minineck BULD118DB Tastatur MS-Tech LT-300U USB Akku 3,6V 700mAh VGA-Mon. TFT 22" W Belinea 112208 Ladegert Sharp GX10/GX20 Toner HP Q7551A Laserjet P3005/M3027/M3035 KSS240A Lasereinheit HR8068 Polo2- Star 25" 28" 15-35kHz HR7360 Nordmende FFS Chassis Polostar 25/28" VGA-Karte Asus EN7200GS 128MB HTD (PCI-E,V,D,T,P) Technisat HD-Vision 32 silber LCD 80GB-HDD Lampe Schwanenhalslampe Modulator Video-TV VAM-3 Leinwand Medium Movielux Compact 180x135cm Typ D Polo /2 21"SVGA mit Touch-Screen Notebook Smartbook i-7500 17" 2500 Dual Core 1GB ATI128 100GB DVD WinXPHome Works Motor Getriebe Servo VGA-Kabel doppelt geschirmt 15m St.-St. SVGA VGA-Kabel Verlngerung 30m USV Mustek UPS 1000 Plus 400W 7405 Gehuse Midi-Tower Micro Chieftec SH-01W-W-W-400 400Watt Digitalkamera Olympus FE-230 XD-Card 1GB Toshiba xD-Picture Card Type M Toner Brother TN6600 Verbatim fr 8360P ca. 6000 Seiten Verlngerung RJ11 St. auf 2xRJ11 Kupplung Chinchkabel 1,2/1,5m/3,0m 6x St. DTV64F Diode Scartkabel -> 6x Chinchstecker Tuner Sortiment USB Gehuse extern 5,25" silber bluemedia TFT 12,1" Aufpreis Weitwinkel-Display Drucker Canon PIXMA IP5300 USB Stick 16GB Kingston 2SC3306 AN7125 TA33 Terminaladapter ISDN-Anlage Eumex 400 TFT Glasfront 15" Beidseitig entspiegelt,IP65 HR46118 Gira Wechselschalter 10630 AP Grau 2N6075A >> 2N6073A FreeX.TV Upgrade-Card Gira 17630 Kombination senkrecht IP44 grau Toner Brother PC 201 Mehrfachkassette inkl Thermotransferrolle HDD USB 3,5" 500GB Verbatim Smart Disk Lautsprecher Satelitenbox MSW-2800 mit Halter 2SA1306 CPU AMD Athlon 64 XSo. AM2 BC212

13,23 6,55 64,50 5,11 3,67 49,90
12,21 3,90 359,00 2,80 84,50 18,00 22,90 69,00 14,80 59,90 315,00 120,00 9,90 20,90 79,00 67,20 23,90 42,90 10,71 6,60 64,90 1,29 12,00 4,11 12,21 77,00 26,50 29,95 897,37 134,00 2,87 67,00 133,80 309,00 5,14 24,00 24,00 55,40 30,17 102,53 21,50 1,63 84,12
Philips DVDR3595H/31 si-sw DVD-Recorder 250 GB HDMI DivX i.Link DVD-ROM Sony Nec DDU1615S-01 white USB Gehuse 3,5 SANSUN Alu Ext. SN-U3,5 Frontpanel 5,25" mit Sound/USB/Firewire BD237 LED Star-Platine fr Seoul P4 Emitter Sat Receiver Analog STR 500 2SC945 HDD 40GB Maxtor 5400rpm 3.5" IDE HR7389 KA2206 Navisystem Tom Tom Go920T Europa/US HDD 80GB WD800AAJS 7200rpm SATA
299,00 15,90 16,01 31,80 3,99 0,47 45,90 1,21 49,90 32,73 4,82 587,00 44,00 48,00 1.428,00 1.486,31 9,84 14,00 49,90 9,90 45,01 72,00 85,00 21,43 5,82 22,00 2,76 4,03 39,90 36,00 21,50 35,00 4,30 162,91 16,50 3,28 139,90 33,24 35,08 6,17 7,08 149,02 47,30 24,62 80,02 0,56 9,48 143,90 139,00 35,90 46,55
2940 HDD 40GB Maxtor Apollo 2MB 7200rpm DiamondMax PlusNotebook Terra Mobile M4204IC 14,1" T5200 1GB Notebook Smartbook i-8640D 15.1" SXGA 64MB GeForce P2,533 512MB Combo 2944 TDANetzwerkkarte 10/100MBs TP-Link Model: TF-3239DL Mainboard MSI K9MM-V DDR2/AGP/AMD Athlon 64 So. AMSATA 2947 Kabel 3,5mm Klinkenst. - 3,5mm Klinkenku. 10,0m 2948 FDD USB extern 2949 Netzteil Sharkoon SilentStorm 120 600W 2950 Gehuse Midi-Tower ATX Raidmax Sirius ohne NT 2951 LA7875N 2952 3SC2978 Photopapier Inkjet Premium Plus HP hochglnzend 20Blatt MPSA42 NE5517AN VGA-Karte Geforce 6200 128MB DDR AGP TV-Out Tinte Epson = T040140 black Tintenkopf Lexmark 10N0217 No.17 black Gehuse Midi-Tower Tronje H-10 ohne Netzteil, silber USB Adapter-->USB-A Kupplung an USB-A Kupplung CPU Intel Core2Quad Q6600 Box TFT Adapterkabel SVGA-15pol./5xBNC 0,2m ISDN-Adapter RJ45 Ku.-St. Software MS Windows Vista Business HR7827 TDA8361 ICL7136CPL IC AN5512 Toner HP 4127x TFT RGB-TTL Interface 4, 9pol.Sub-D Sagem Farbbandrolle TTR-900 f. Phonefax 440,445 Thermotransferrolle BrotherT-Ser PC-204RF BC858B SMD 2SK2141 Technisat DigiPlus STR1 mit CONAX+Cryptoworks Drucker Samsung ML-1520 Laser HR6597 HR7172

6,00 18,00 2,44 19,50 88,00 12,00 48,00 34,00 240,00 69,00 176,45 249,00 59,90 42,00 49,95 429,00 369,00 16,00 21,00 219,00 6,47 1,23 29,64 7,18 50,78 519,90 15,18 12,00 7,70 204,14 28,45 22,90 37,00 59,00
998,00 13,90 69,95 107,00 29,00 4,00 1,46 299,90 0,56 3,28 44,63 2,98 18,47 2,80 1,74 1,74 102,48 3,75
Drucker Brother HL-2030 Kabel DVI-St. - VGA-St. 2m Maus Dominatrix OCZ 3200DPI LAS USB blau-schwarz Akku 3,6V-1250mAh 1420 Toner Kyocera BK TK120K Notebook Sarasota 8050i Pent.M 1,7G 15,4" 512MB 60GB 3749 DVD-Brenner Mainboard PhotoPlay Xtreme ,GamePark und Bowl-O-Rama Aktivboxen 350W PMPO VGA-Mon. TFT 17" AMW M176A TCO99 Drucker Canon i-SENSYS LBP 2900 Laserdrucker MCU TFT-Display Syncmos Kabel 9-Pol. Sub-D Stecker-Buchse 5m Kabel 36-Pol Stecker -> Kupplung 1,9m Centronis/Druckerkabel Chinchkabel 2,5m St./St. Video/Digital DVD-KIT1 Kabelset EDC Group Daewoo DLP 26H1 26" LCD 16:9 HDR TOP204YAI 2SK2915 = IRFPC60 Riemen 27mm/1/1mm Riemen 40mm/1,5mm Riemen 95mm/1,0mm Netzschalter NS44 Tonereinheit kompl. Brother DR 8000 Toner HP C4092A Laserjet 1100/1100A Tintenpatrone Samsung INK-M40 black Barebone System AOpen XC Cube EX18 V2 nForce2/462 AMD DVD -RW 4,7GB 10er-Pack Tintenpatrone Brother LC900BK black Tintenpatrone Brother LC900C cyan Tintenpatrone Brother LC900M magenta Tintenpatrone Brother LC900Y yellow USB WLan Adapter EDIMAX EW-7316Ug Taschenlampe Penlight clip LED Leuchtstift Software x3: Terran Conflict HEF4049 (SMD) VGA-Karte Saphire/R7000/64MB Backlight Inverter DA 0201 Fujitsu X150F DVB-T PCMCIA-Modul Techni Sat Netzwerkkarte PCI Conceptronic/Gigabyte WLAN 54Mbps/Network Card C04-045 IRFP450 AC188K ZTR AT2250/12 = HR2287 T29 2SC5584 Netzwerkkarte Con PCI Digitus USB 2.0 480Mbps 4xext. 1xint. Chinchkabel 10,0m 4x St. PA-Verbindungskabel Adapter 5m PA-St.-6,3mm Klinkenst. Widerstand 0,125W PDA Ersatzstift Samsung 15 " TFT Display LTM150XI-A01
112,00 7,90 36,50 10,26 94,90 1.020,63 308,00 10,15 179,90 99,90 33,68 14,36 8,21 4,00 14,30 539,00 13,28 12,30 1,20 2,56 2,56 8,21 150,80 56,42 39,95 194,91 15,00 22,00 14,50 14,50 14,50 18,50 9,13 38,99 5,00 37,96 56,42 107,72 19,90 6,90 6,31 24,62 12,31 16,90 6,30 12,30 0,55 8,90 399,00

3847 3848

RAM DDR 256 MB-400 AENEON CL3 (PC3200) MP3 Player USB interno 512MB Drucker Brother HL-2040 Toner Lexmark C720 #15W0904 Fotoentwicklereinheit Streamerband Imation SLR7 20/40GB Tintenkopf Olivetti Einweg Lab300 schwarz FJ31 Adapter 1x Klinkenku. 3,5mm -> 2,5mm St. Spule 79A167110L Backlight TFT 235x2,6 Industrie Philips 32PFL 7862D/10 82cm 16:9 HDR DVBT 3xHDMI Navisystem TomTom One XL D/A/CH USB Kartenleser 3,5" 30 in 1 intern LCD-Projektor NEC VT37 800xAnsi-Lumen UA723 ZTR Eldor 1242.0068 Batterie CR2430 Electronic Varta 2SC4408 Lfter 220V-240V 120x120x40mm DP201A Netzteil Notebook SMP-120W Universal 15-24V/5A/120W Schutzglasscheibe 19" 396x321x3mm beids. Entspiegelt DVD-Brenner Lite On LH-20A1S SATA Autohalterung fr PDA EDR910x2AR/160S 9-Kanal Digirecorder Tintenkopf Olivetti Einweg OFX1000 schwarz FPJ20 EDSR 100/ 1-Kanal Digitalrecorder ohne HDD Drucker HP Photosmart D5360 2SK680A BD546 ULN2803A SMA-Z 1001 2SC5198 2SA1941 Adapterkabel Mini ISO-Stecker Relais Schrack 12V 2xUmschalter RE032012 MR756 TDA7560 Accesspoint ASUS WL-330GE WL125 Sinus A30 mit Anrufbeantworter T-Com WLan Antenne Longshine Tastatur / Maus Cherry M82-24800DE Sirius XT Cordless Bedienungsanleitung Motorola V980 Kaskade BG 1899-023-643 Spannungswandler 230V-12V SW12300 -300Watt Car-Hifi NF-Kabel HCK 9704 1,5m Car-Hifi NF-Kabel HCK 9704 10m DVB-T-Receiver Homecast T3000 Ladegert Universal fr Handys COM3in1 MC60/V300 Inverter Notebook Medion MD41700 Adapterkabel Iso-Stecker BMW Ledertasche Samsung SGH D500 /SGH D60 TAE Stecker zum Montieren TDA8843 USB Digital Sat Receiver TechniSat SkyStar HR8001 HRC-MOS

33,50 12,83 14,62 19,90 63,61 59,50 26,67 13,00 13,00 13,00 4,40 4,50 1.199,23 15,39 7,50 5,00 2.290,00 89,90 22,57 24,62 29,75 113,87 7,08 320,11 4,30 5,89 35,90 710,00 20,52 3,80 15,39 25,90 18,47 28,73 4,95 125,15 5,95 9,23 10,05 7,18 7,59 24,00 124,00 12,61 253,47 6,90 4,90 2,20 2,40 2,60 5,13 4,95

4195 4196

4218 4219
Backlight TFT 87x2,0mm wei USB Stick 1GB Verbatim/SanDisk silver/ Exigo AN5792 VGA-Mon. TFT 19" NEC LCD1970NX black T-Shirt Transfer-Folie Notebook Smartbook I-1500C 15,1" 1,5GHzVIA 256MB Combo Deckenlautsprecher SPE-158/WS Hohlstecker Einbaubuchse Tinte Epson = T061440 gelb Tinte Epson = T061340 rot Tinte Epson = T061240 cyan Tintenpatr. Canon PG-40 black Stecker-Netzgert PSS-2500SV Arbeitsleuchte Universal "WP-138" 230V38W/50Hz Steckdosenleiste "Protect pro 10" 10Steckdosen Diode STPRF 1620 CT Flachbandkabel RM 0,5mm bis 30pol. Ledertasche Krusell XS-Long Headset MS-Tech LM-15 TW10N400CZ Triac IDE Controller PCI Promis 2 Port Car-Amplifier Carpower HPB-602 Powerline Adapter Corinex USB Bluetooth Adapter 20m AV-Receiver AMP168 silber 5-Kanal Netzteil Protec PW-FA 100PFC Magic Games Netzteil 420W Monitorkabel DFP 20pol. Centronics Stecker 2,0m PC kompl. Midi-Tower/K7S41GX/Sempron2200+/512MB/40GB/DVD/Maus SM-20/VGA on Board/Floppy Laufwerk/TR2 CPU Lfter/ Tastatur KB09e Adapterkabel Iso-Stecker ISO2CAR mute fr VW Brother Fax T102 ZTR Eldor 1122.0379A Software Quicken2009 CD-Tasche 40CDs Stoff schwarz Netzteil McPower SNT-2470 110-240V, Out 5-24V, max. 70W 2SK2545 2SC4544 MBR20100 CT Software Nero OEM V6.0 Steckdosenleiste 6-fach mit Schalter 5m lange Zuleitung, wei VGA-Kabel Verlngerung 10m St.-Bu. HR8484 2SD1264 DVD-Combo Notebook Toshiba SD-R2612 CPU Intel Core 2 Duo E8500 2x3166MHz USB Stick 1GB Kingston/PNY/Toshiba WLan Modul Notebook Smartbook/Terra Mobile Akku PDA37065 3,7V 950mAh Li-Ion Software Roxio Backup MyPC OEM Software MS Windows Server 2003 / Erweiterungspack 5 Lizensen
22,47 14,90 24,82 367,80 16,20 697,59 17,45 4,66 11,00 11,00 9,24 20,00 14,36 27,70 27,70 5,95 8,21 18,47 10,06 28,73 42,05 56,42 49,90 14,90 81,97 99,96 33,86 9,90
307,65 29,24 99,00 79,00 52,00 7,90 35,90 3,59 6,97 10,19 10,15 13,80 15,90 30,09 5,06 60,01 172,90 8,90 49,95 36,93 22,57 105,00

4272 4273

CPU Pentium IV 3,0GHz 800Mz 1MB So. 775 Mainboard Gigabyte GA-8N-SLI S775 DVD-Brenner NEC ND6550 Dual Notebook VGA Lfter ARCTIC Cooling Mainboard Gigabyte GA-8I945P-G-RH So.775 RAM DDR 512 MB-400 APACER CL3 HA11235 2SB940 2SB778 2SB892 = 2SA1020 2SD998 LA7845N Technisat DigiPal 2 B DVB-T Receiver 0001/4920 Technisat DigiPal 2 TX ADEMCO Vista-48DE + Akku WP7,2-12 ADEMCO LCD-Bedienteil 6164ICON Bewegungsmelder DT-7235T EU IntelliSense Auenmelder ASL-ES 120-S/BL RAM DDR2 2GB 800 PC6400/CL5/Kingston Leuchtstoffrhre L38/860 ZTR JVC IF-C2000SDE DVD +R 4,7GB 50er-Pack Router D-Link DSL-G664T WRLS ADSL Drucker HP Office Jet 5610 Multifunktion+Fax HR7927 M48T86PC1 RTC Batterie TDA4605-15 Siemens RAM DIMM 64MB PC100 Siemens Netzteil Game Boy Advance ICE2AS01 IC-Fassung PLCC 32 (SMD) HDD 300GB Samsung HD300LD 8MB 7200rpm USB Kabel A --> A 1,8m USB Kabel A --> A 3m/5m Notebook Smartbook 5500V 15,1" DDR2 RAM/Geforce6600/128MB Thomson Hochspannungsverteiler RP52 Versandkosten UPS-Express einschl. Samstag bis 5kG 24LC16B (SMD) HR6591 Lasereinheit HOPM3A VGA-Mon. 17" Belinea 101728 TC099 Nokia 6230i silber Nokia 5140i schwarz Samsung LE40A457 104cm / 40" LCD Mainboard MSI K8Neo-FSR Athlon 64 Mainboard PhotoPlayXtreme ohne Prozessor u. Speicher VGA-Mon. TFT 19" HU196D TC099 Akku 1,2V 0,6Ah NICD Durchm.17,5mm x Hhe 26mm mit Ltfahne 2SB792 (SMD) HR8798 LCD-Projektor Epson EMP 83e 2200 XGA Ansi-Lumen Backlight TFT 25,5x0,4cm wei PC1377 Anlaufkond. bis 20 F

79,00 94,38 81,04 20,42 102,48 39,00 4,37 11,08 4,82 4,20 8,41 6,06 79,90 69,90 218,96 103,41 45,90 99,40 28,00 22,36 153,77 45,00 81,00 109,00 31,59 27,49 8,52 18,00 15,39 21,66 3,28 79,00 4,20 6,60 1.189,21 83,10 58,31 4,36 26,78 23,60 224,66 1,02 149,00 1.022,00 72,84 470,00 271,86 4,25 8,27 39,30 729,01 20,05 10,23 8,52
Staubfilter fr PC Gehuse Chieftec Dust Guard WLan Antenne Gummi 2400/2500MHz SN74HC393N DVD-Brenner Samsung SH-S162A 16-16/8-4DL HDD 160GB Samsung SP1654N 8MB 7200rpm Aktivboxen Genius Speaker SP-J06 120W Tintenkopf HP C8767EE ABD No.339 black 21ml Notebook ACER TM 2412 LMi Cel-M380 Lfter Halterung So. 478 CPU AMD Sempron 3000+ 1800MHz/128KB S. 754 Mainboard ASRock P4I65PE CPU Celeron D 2.4GHz/256/533Mz ZTR 163007-9C265 HR6505 Chinchstecker Plastik Mainboard PhotoPlayXtreme 7SDV KSP2222A Drucker Brother DCP 115C Scartkabel 10m Router SMC 7904 BRB ADSL2 Barricade 4-port Diagnose Karte Tintenpatrone Brother LC800BK black ZTR Y265477 fr Sony Ecomo 751 Notebook Amilo Pro V2035 CelM380 FQP3N90 HR5703 HR8620 Eldor 1372.0033 ZTR LCD-Projektor NEC VT48 800x600 Digitalkamera Sony Cyber-shot Still DSC-W70 7,2Mega-Pixel 2SD2391 Q VPS16 IC BU4525AX PA-Box Mini "ADX One" evidence 100W Headset-Telefon TP30 74LS244 (DIP) Maus Logitech MX 518 Gaming-G.Opt.M. CPU AMD Athlon Venice So 939 Mainboard Gigabyte GA-K8N51PVM9-NV-RH 6150B TFT 15" Kit = Display / Inverter / Controller4 Mainboard Biostar K8M800-M7A + CPU AMD At. 3200+ CPU Khler HEF4512BP 24C04 /DIP8 Speicher Chinchkabel 10,0m St.-St. Video Siemens Gigaset A160 schwarz / beleuchtetes Display 50Eintrge Touch Scheibe 12,1" ELOSCN121AR resistiver VGA-Mon. 17" Belinea 1705 S1 TCO99 Web Cam Logitech QuickCam Chat OEM USB Stick 256MB Kingston USB Docking Station / 9/1 LAN + VGA equip 128573 Navisystem bluemedia BM-6420 256MB MP3 Player 512MB bluemedia 8200/8274 Rose
18,47 15,28 2,32 48,22 59,00 18,47 28,50 2,26 5,00 911,99 10,15 57,00 56,42 51,19 82,07 30,77 1,10 199,00 2,67 74,79 14,90 71,71 1.435,18 20,00 73,86 688,79 5,06 27,60 33,86 530,00 317,92 4,40 42,25 7,02 36,41 16,00 5,18 57,45 42,80 92,23 589,00 137,47 2,50 3,69 15,00 39,90 123,00 202,30 29,90 14,80 79,90 297,39 46,16

59,95 135,00 21,00 18,00 18,00 18,00 48,00 295,00 229,00 69,80 35,90 429,90 28,90 59,00 43,90 179,00 36,00 19,90 109,90 5,70 12,85 6,40 58,00 26,00 0,00 45,00 9,90 75,00 47,00 99,50 16,00 66,90 849,01 109,00 285,63 19,50 225,00 4,95 59,90 1.199,90 289,00 47,00 15,00 15,00 15,00 365,00 89,00 65,00 37,80 5,50 64,00 89,90 2.059,00 7,00
Touch Scheibe 15" CRT Micro-Touch 13-1401-01NL 14,62" Gehuse Midi-Tower ATX 420Watt Omega 20+4 Pin Tintenpatrone Brother LC700M rot Tintenpatrone Brother LC700Y gelb Tintenpatrone Brother LC700C blau Mainboard SC815C Amatic HDD 400GB Samsung HD400LD 8MB 7200 P-ATA CPU AMD Athlon 64 XDual-Core So. AM2 Box AD1881 AJST Halogen Lmpchen 6V 10W Mainboard Biostar GF6100-M9 So.939 Micro ATX Powerline Adapter Devolo Highspeed Startet Kit Notebook Terra M1751 iC-T550 Intel Core2, 2GBRAM DDR, 4583 120GB S-ATA, XP-Prof, GF7950Go 4584 CD-R 700MB 80min Spindel 10 Stck. lightScribe

4620 4621

VGA-Karte AGP GF6800 512MB DDR2 Ledertasche Nokia 6230/6233 Philips Diktiergert 388 Philips Mini Kassette 2x30min Diseqc Relais 2/1 Spaun SUR 211F Univer. Mainboard Foxconn K8x890M2AA-RS2H PCI So. AM2 Tintenkopf HP C4844AE No.10 black 69ml Tintenkopf HP C4837AE No.11 magenta 28ml Akku Nokia 2110 6,0V 700mAh CompactFlash Card 2GB Kingston Mainboard Asus P4B533 So.478 CPU-Lfter AMD Athlon 64 /So.754/So.940/So.939 TR2-M14 SE (K8) USB Gehuse extern 3,5" HAWAI SATAII Alu CPU Pentium IV 3,06Gz 533Mz So.775 DVD +R 4,7GB 10er Spindel Light Scribe Netzteil Notebook MOBILE 1700/7000/1750/1571/3200/5100/Anima 5100S,Aura 1770 110- 240V Kopfhrer Schutz Philips Fernbedienung Schneider STV1750 Spannungswandler 24V-230V SW24300 -300Watt BC848C Fernbedienung IRC 81312 / 81483 / 81339 LM2479 NA L6385 DTV32D STP20NE06 Klinkekupplung 2,5mm Stereo zum Lten Klinkenstecker 2,5mm 4-pol. Akku 1,2V 330mAh fr Sanyo N-270 AA mit Ltfahne SAE800/IC Klinkenstecker 3,5mm 4-pol. JVC GZMG 20 Festplatten Camcorder 20GB silber/sw RAM DDR2 1GB 800 Aeneon PC2-6400U-555-12 CL5 Mainboard Asus P5KPL-1600 G31 GSA Batterietester profitec BT105A HR6305 Kabel 4xChinchkupplung DIN 5 Pol Stecker 0,2m stereo Scart-Verteiler 1x Stecker / 2x Buchse
98,00 9,90 139,90 12,60 21,68 59,90 32,00 31,00 19,90 39,90 85,00 23,50 23,00 72,00 13,00
72,00 4,99 19,90 49,95 0,58 19,90 6,80 9,30 9,70 10,25 3,90 4,50 2,30 12,00 2,90 669,90 24,00 64,90 14,00 26,00 4,00 4,90 13,00 18,00 16,00 82,80 85,00 19,90 29,90 29,99 49,99 29,95 229,00
4622 Photopapier Inkjet Premium Glossy 160g 12Blatt Hochglanz Photopapier Inkjet Premium Glossy 180g 10Blatt Beidseitige 4623 Hochglanz-Beschichtung CD-RW 80Min 700MB 1x-4x 10er Pack Verbatim Scratch 4624 Resistant Surface 4625 Display Deckel fr Targa Visionary XP210 15" Uniwill Netzteil ENP-2320=ENP-0812A ENHANCE 200W 4627 Toner Olivetti 2er Pack fr 2015/2018 TA /2016/2216/Akku 7,2V 1400mAh LI-Ion Digitalkamera JVC BN-VFSoftware Need for Speed ProStreet Software Half Life 2 Orange Box incl. Half Life 2, Episode 4630 One, Episode two 4631 Software GTA: San Andreas Grand Theft Auto 4632 Navisystem Tom Tom ONE T Europe 3rd Version mit TMC

4843 4844

Maus Logitech Cordless Mini silber USB Tastatur Microsoft 500 white Drucker Canon PIXMA IP3500 RAM Notebook 1GB ADATA DDR 400 Inverter Display Dell Latitude D500 Serie VGA-Karte PCIe ASUS EN8600GTS 512MB DDR3 Navisystem Tom Tom One T D/A/CH 3rd Version mit TMC Trommel DR-3000 Brother Batterie V319 - Ersatz fr SR527 TIC216M >> Ersatz fr Z0409ME DVD -R 4,7GB 10er Spindel Light Scribe VGA-Karte PCIe ASUS EN8600GT Silent 256MB VGA-Karte AGP MSI NX7600GT 256MB/512MB CPU Intel Core2 Duo E4600 800MHz So. 775 BOX USB Stick 1GB Platinum RAM DDR2 1GB 800 Qimonda
29,90 17,00 79,90 63,00 75,00 92,00 149,95 149,00 2,50 3,75 14,00 79,90 104,90 109,00 9,90 27,00 329,90 24,00
4845 Humax PDR 9700 Digital-Sat-Receiver mit 160GB Festplatte 4846 Tastatur Logitech Media Keyboard Notebook Terra Mobile-Business 6010 15,4" / Intel Core Duo/RAM DDR2 2GB/HDD 160GB SATA/Windows XP Prof. Lfter 12V 120x120x25mm Sharkoon Silent Eagle 1000 mit LED Wandhalter LCD MST-16 Drucker Brother DCP-350C USB Gehuse extern 2,5" MS-Tech LU-260 DVD-Brenner LG GSA-H58N DVD-Brenner extern LG GSA-E50N Maus Sansun SN-108 mini optical PS/2 VGA-Karte PCIe Geforce 8800GT 512MB ECS CPU Intel Core2 Duo E6750 2,66GHz So. 775 Notebook Tasche 17" NL600 schwarz 4x Fcher Notebook Einbaukit HDD statt DVD HDMI nach HDMI Kabel 5m Mainboard Gigabyte GA-M56S-S3 PCIe So.AM2 HDD 160GB Maxtor DiamondMax21 S-ATA Tastatur / Maus Logitech Cordless Desktop Rech. 1500 USB/PS/2 Maus Logitech NX60 USB/ PS/2 Cordless Maus Logitech RX700 USB silber CPU AMD Athlon 64 XSo. AM2 Box LNC Halter 2-fach universal Doppel CD Player CDX-5 schwarz Drucker Canon MX300 HDD 320GB Samsung HM320JI 8MB 5400 SATA 2,5 VGA-Karte Geforce 7200GS 256MB DVI PCIe DDR2 Netzwerkkarte PCMCIA 10/100Mbit Base-TX Edimax EP4103DL SD-Card 1GB Platinum / Adata SD-Card 2GB Platinum USB Stick 2GB Platinum USB Stick 4GB Trekstor HDD 160GB ExcelStor J8160S 7200rpm 8MB SATA Chinchkabel 3x St. - 3x St. HCK970810
1.129,00 11,00 29,90 149,90 14,90 49,90 89,90 12,50 98,80 169,90 49,90 41,65 16,00 72,90 45,00 43,70 25,90 23,80 69,90 6,60 129,95 119,90 71,90 31,90 20,92 11,00 19,90 14,00 26,50 52,00 31,70