website:http://biz.LGservice.com e-mail:http://www.LGEservice.com/techsup.html

COLOR TV SERVICE MANUAL

CHASSIS : MC-017A
MODEL:RE/RL-29FA31PX MODEL:RE/RL-29FA33X/PX

CAUTION

BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

P/NO : 3828VD0089A

Jan.,2003 Printed in Korea

CONTENTS

Contents..... 2 Safety Precautions....3 Specifications.... 4 Control Descriptions... 5 Disassembly Instructions.... 8 Adjustment Instructions... 9 T rouble Shooting... 20 Wiring Diagram.... 25 Block Diagram.... 26 Exploded View... 28 Exploded View Parts List....29 Replacement Parts List... 30 SVC. Sheet....

SAFETY PRECAUTIONS

IMPORT ANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance

An lsolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitary that may be inadvertently introduced during the service operation. If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified. When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB. Keep wires away from high voltage or high temperature parts. Due to high vacuum and large surface area of picture tube, extreme care should be used in handling the Picture Tube. Do not lift the Picture tube by it's Neck.
Before returning the receiver to the customer,
always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on positioin, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1M and 5.2M. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer.
Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet. Do not use a line Isolation Transformer during this check. Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each esposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5mA. In case any measurement is out of the limits sepcified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.

X-RAY Radiation

Warning:
The source of X-RAY RADIATION in this TV receiver is the High Voltage Section and the Picture Tube. For continued X-RAY RADIATION protection, the replacement tube must be the same type tube as specified in the Replacement Parts List.
To determine the presence of high voltage, use an accurate high impedance HV meter. Adjust brightness, color, contrast controls to minimum. Measure the high voltage. The meter reading should indicate 23.5 1.5KV: 14-19 inch, 26 1.5KV: 19-21 inch, 29.0 1.5KV: 25-29 inch, 30.0 1.5KV: 32 inch If the meter indication is out of tolerance, immediate service and correction is required to prevent the possibility of premature component failure.

Leakage Current Hot Check circuit

AC Volt-meter

To Instrument's exposed METALLIC PARTS
Good Earth Ground such as WATER PIPE, CONDUIT etc.

0.15uF

1.5 Kohm/10W

SPECIFICA TIONS

Note : Specification and others are subject to change without notice for improvement.
Video input system: PAL-B/G, D/K, I/I SECAM-B/G, D/K/L/L NTSC M NTSC 4.43(AV) Intermediate Frequency (Unit : MHz) VISION IF : 38.9MHz,33.9MHz(SECAM-L) COLOR IF : 34.47MHz(4.43) 35.32MHz(3.58) : NTSC-M VIF-4.25000MHz ( ): SECAM VIF-4.40625MHz

SOUND IF :

33.4MHz (B/G) 32.9MHz (I/I) 32.4MHz (D/K,L) 34.4MHz (M) 40.4MHz (L)
Power requirement : 110~240V, 50/60Hz Power consumption : 1Max 155W CPT : Flat CPT
Tuning range Band VHF-Low VHF-High Hyper UHF Ch21-69
For TV B/G Ch2-4 Ch5-12 D/K Ch1-5 Ch6-12 Ch4-13 Ch2-13 I/I NTSC
For CATV S1'-S3', S1 S2-S10, S11-S20 S21-S41 Ch14-69 Feature : Auto programme/Manual programme SVM (Scanning Velocity Modulation) Digital Eye Digital Comb Filter Auto Sleep Dynamic Focus Programme Editing PSM (Picture Status Memory) SSM (Sound Status Memory) CTI Teletext (8 page) Turbo Search, Picture & Sound ACMS ARC (Zoom 1/ZOOM 2, 16:9 <-> 4:3) 2 TUNER PIP(Double Window PIP)
Tuning system : FVS 100 Programme memory Antenna input impedance : VHF/UHF 75 ohm, unbalanced OSD (On Screen Display) : EZ MENU Type Voice coil impedance : 8 ohm Sound output : 10W External connection : AV Input: 3 (side or front,rear) Component Input: 1 (rear option) PERI TV Connector: Full Scart,AV Input or Scart(option) R,G,B Input: AV-1
External In/Output Audio-In:0.5Vrms!3db,over 10Kohm Audio-Out:0.5Vrms!3db,below 1Kohm Video-In/Out:1Vp-p!3db,75ohm R,G,B In:0.7Vp-p!3db

DESCRIPTION OF CONTROLS

All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set.

Remote control handset

Before you use the remote control handset, please install the batteries. See the next page.

PICTURE

TV/AV MENU

Note : Do not place any heavy objects (over 4 Kg) on the RE-29FA31 series models.

DISASSEMBLY INSTRUCTIONS

Important note
This set is disconnected from the power supply through the converter transformer. An isolating transformer is necessary for service operations on the primary side of the converter transformer.

Chassis Assy Removal

Grasp both side of Frame and pull it backward smoothly.

Back Cabinet Removal

Remove the screws residing on the back cabinet and carefully separate the back cabinet from the front cabinet. (Fig. 2-1).

CPT Removal

1. Pull out the CPT board from the CPT neck. 2. Place the front cabinet on soft material not to mar the front surface or damage control knobs. 3. Remove 4 screws securing the picture tube mounting brackets to the front cabinet. 4. Carefully separate CPT from the front cabinet.
PICTURE TUBE HANDLING CAUTION
Due to high vacuum and large surface area of picture tube, great care must be exercised when handling picture tube. Always lift picture tube by grasping it firmly around faceplate. NEVER LIFT TUBE BY ITS NECK! The picture tube must not be scratched or subjected to excessive pressure as fracture of glass may result in an implosion of considerable violence which can cause personal injury or property damage.

CPT PCB Remove Screws

A/V PCB 100Hz PCB

Control PCB

Main PCB

Main 2 PCB

Fig. 2-1

Fig. 2-2

ADJUSTMENT INSTRUCTIONS

Safety Precautions

1. It is safe to adjust after using insulating transformer between the power supply line and chassis input to prevent the risk of electric shock and protect the instrument. 2. Never disconnect leads while the TV receiver is on. 3. Don't short any portion of circuits while power is on. 4. The adjustment must be done by the correct appliances. 5. Unless otherwise noted, set the line voltage to 230Vac!10%, 50Hz. 5. The adjustment of TVshould be performed after warming up for 15 minutes.

White Balance Adjustment

NOTE : This adjustment should be performed after screen voltage adjustment. 1) Tune the TV set to receive an 100% white pattern. 2) Press Channel UP/DOWN button for desirous function Adjustment. 3) Press Volume UP/DOWN button to adjust the data. 4) Adjust until CONTRAST and BRIGHT become 3.5 Ft_L 5) Enter the SVC mode by pressing the SVC button. 6) Adjust the Y value of High Light with R-DRIVE and adjust the X value with B-DRIVE until they have the color coordinate of High Light as below. 7) Adjust until CONTRAST and BRIGHT become 4.5 Ft_L 8) Enter the adjustment mode by pressing the SVC button. 9) Adjust the Y value of Low Light with R-CUTOFF and adjust the X value with B-CUTOFF until they have the color coordinate of Low Light as below. 10) Repeat adjusting until the color coordinate of High and Low Light is satisfied. 11) Check the adjusted color coordinate with a white balance meter.

Test Equipment required

1. 2. 3. 4. 5. RF signal generator (with pattern generator) DC Power Supply Multimeter (volt meter) Oscilloscope Color analyzer

Focus Adjustment

Test Point Adjust : Observing Display

Color Tem.

: Focus control of FBT

X 266!8 282!8

Y 273!8 288!8

Memo NON EU EU

13000K
1) Tune the TV set to receive a digital pattern. 2) Adjust the lower Focus volume of FBT for the best focus of vertical line B. 3) Adjust the upper Focus volume of FBT for the best focus of area A. 4) Repeat above step 2) and 3) for the best overall focus.

10000K

Menu CR CG CB
LG 29 FLAT LG 32 FLAT 0080 019B 019B 019B
MENO Low Light Adj Low Light Adj Low Light Adj High Light Adj High Light Adj High Light Adj

WR WG WB

Deflection Data Adjustment
1) Deflection Data Adjustment should be performed with the remote controller for handset. 2) Enter the SVC mode by pressing the SVC button. 3) Enter the Deflection Adjustment mode by pressing the ADJUST button. 4) Press the Channel UP/DOWN button to select adjustment items. 5) Press the Volume UP/DOWN button to adjust the data. 6) The TV set receives PAL-B/G Digital pattern. VL (Vertical Linearity) Adjust so that the boundary line between upper and lower half is in accord with geometric horizontal center of the CPT.

Fig. 1

Screen Voltage Adjustment
1) Turn the TV set on. 2) This adjustment should be performed after warming up for more than 15 minutes. 3) Enter the SVC mode by pressing the SVC button on remote controller and by pressing the H-LINE button. 4)If OK appear more than 2 on the screen turning screen volume,press the OK button.
VA (Vertical Amplitude) Adjust so that the circle of a digital circle pattern may be located within the effective screen of the CPT. SC (Vertical S Correction) Adjust so that all distance between each horizontal lines are to be the same. VS--(Vertical Shift) Adjust so that the horizontal center line of a digital circle pattern is in accord with geometric horizontal center of the CPT. HS (Horizontal Shift) Adjust so that the vertical center line of a digital circle pattern is in accord with geometric vertical center of the CPT. EW (Horizontal Width) Adjust to that a digital circle pattern looks like exact circle. ET--(East-west Trapezium) Adjust to make the length of top horizontal line same with it of the bottom horizontal line. EP (East-west Parabolar) Adjust so that middle portion of the outermost left and right vertical line looks like parallel with vertical lines of the CPT. CRNU & CRNL Adjust so that the vertical line at every 4 corners of the screen looks like parallel with the vertical lines of the CPT. BOW In line adjustment, not to change default value is basic. ANG In angle adjustment, adjust until inclination of left and right screen should be precise.

OPTION Adjustment (SVC MODE:OPTION-1, OPTION-2, OPTION-3,Teletext)
1) Press YELLOW button or OP1,OP2,OP3,OP4 button on SVC Remote Controller. 2) Input data directly by the buttons corresponded with OPTION1 ???(0~127), OPTION2 ??(0~63), OPTION3 ???(0~127). 3) Select each OPTION function by the CH Up/Down button and then set up each OPTION by the VOL Up/Down button.
Table 1. OPTION 1 Function
Option TEXT Code 0 ACMS CH+AU EYE TURBO 1 With TXT FLOP TXT TOP TEXT Without ACMS funtion With ACMS funtion Without D/K CHINA or BB System With D/K CHINA or BB System WITHOUT EYE WITH EYE Without TURBO SEARCH Funtion With TURBO SEARCH Funtion Austrailia Without TOP Text Function Without TXT Remark
Table 2. OPTION 1 CODE Data
OPTION Data 6 TXT 0 TOP 1 ACMS CH+AU EYE 0 TORBO 0
Menu VL VA SC VS HS EW ET EP CRNU CRNL BOW ANGLE CRNU6 CRNL6
Range 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF 0~FFFF
LG 29 FLAT 0033 FFFD FFFE FFD1 000B 000A FFF9 FFFC
PHILIP 32 FLAT 0000 002D 0000 FFFE 0079 001B FFFF FFC0001

- 10 -

DATA 63

ACMS CH+AU 1 1

TURBO 1
Table 3. OPTION 2 Function
Option C MUTE Code 0 I/II SV MONO VOL 200 PR SYS 3 Function CARRIER MUTE(MSP-3410) EU Remark
Not CARRIER MUTE(MSP-3410) NON EU NICAM Check NICAM & FM STEREO NO SAVE DUAL/SOUND Condition SAVE DUAL SOUND Condition Without Forced MONO sound System With Forced MONO sound System NORMAL VOLUME CURVE RUSHED VOLUME CURVE 100 PROGRAM SAVE 200 PROGRAM SAVE B/G,I.D/K B/G,I.D/K,L/L B/G,I.D/K,M RESERVED CHINA ONLY EU NON EU
Table 4. OPTION 2 CODE Data
OPTION CMUTE Data A2 ST AI/II SV MONO 1 VOL PRO 0 SYS 0

- 11 -

OPTION CMUTE Data 0 0

A2 ST 1 1

I/II SV 0 0

MONO 0 0

VOL 0 0

200 PRO 1 1

SYS 1 2

I/II SV 1 1

MONO 1 1

200 PRO 0 1

SYS 3 0

- 12 -

OPTION CMUTE Data 1 1

A2 ST 0 0

200 PRO 0 0

MONO 0 1

VOL 1 0

200 PRO 1 0

- 13 -

VOL 1 1

200 PR 1 1

OPTION CMUTE Data 255 1

A2 ST 1

I/II SV 1

MONO 1

200 PR 1

Table 5. OPTION 2 Function
Option TBS Code 0 DOLBY HP VOL WOOF WIDE DVD SCART 1 BOOSTER CONTROL LOCAL KEY SOFT TOUCH NO VIRTUAL DOLBY VIRTUAL DOLBY WITHOUT H/PHONE VOLUME WITH H/PHONE VOLUME WITHOUT WOOF SPEAKER WITH WOOF SPEAKER 4:3 TV 16:9 TV WITHOUT DVD INPUT WITH DVD INPUT PHONE JACK SCART JACK MSP3411 Function Remark W/O PIP MODEL W/PIP MODEL

- 14 -

Table 6. OPTION 3 CODE Data
DATA DATA 44 TBS 0 TOUCH DOLBY HPVOL WOOF WIDE 1 DVD SCART TBS TOUCH DOLBY HPVOL WOOF WIDE DVD SCART 1 0

- 15 -

DATA 135 136

TBS 1 1

TOUCH DOLBY HPVOL WOOF 1 1

WIDE 1 0

DVD SCART 1 0

DATA 181 182

TOUCH DOLBY HPVOL WOOF 0 0

WIDE 1 1

- 16 -

DATA 227 228

WIDE 0 1

DATA 255

WIDE 1

DVD SCART 0 1

- 17 -
Table 7. OPTION 4 Funtion
OPTION LANG CODE 2 E Only English+EU 4 English+Other EU Language English English/German/French/Italian/Spanish English/Dutch/Swedish/Norwegian/Danish/Swiss/Portuguess/Roman ian/Polish/Hungarian/Czech/Russian T LAN 16 West Europe East Europe Turkey Czecho/Hungary Cyrillic 1 Cyrillic 2 Cyrillic 3 Turkey/Greek 1 Turkey/Greek 2 Turkey/Greek 3 Arab/France Arab/English Arab/Hebrew 1 Arab/Hebrew 2 Farsi/English Farsi/France Farsi all Funciton

- 18 -

Table 8. OPTION 4 Code Data
DATA 202 LANG 2 TLAN 2 DATA LANG TLAN 5 DATA LANG TLAN 8 DATA LANG TLAN 11 DATA LANG TLAN 16

- 19 -

TROUBLE SHOOTING
Check pin 31 of MICOM. 5V Check / Replace Q871,Q851,Q852,IC856, IC802,IC803. 3.3V Check the H-OUT voltage at pin 8 of IC1113. 8.0V 0V Check / Replace IC11,FR359,FR360, D339,D349.
Check the voltage at pin 41 of MICOM. 0V Check / Replace D414,FR443,Q855,Q856.
Check the voltage of C404(+). 67V Check / Replace R407,D867,FB854.

Check / Replace IC1113.

Check the voltage at pin 2 of FBT. 135V
Check / Replace R865,L853,D850,F854.
Check / Replace Q401, Q402, T401.
Check the voltage of C821.
Check the voltage at pin 4 of STR. 15V
Check / Replace SW1101,F1511,T1511, DB814,TH810.
Check / Replace R809,D802,D803.
Check / Replace IC801 and the secondary part of POWER circuit.

- 20 -

Check if heater element is lighting.
Check the heater voltage.
Check/Replace FR442,R910.
Increase the screen voltage of FBT.

Check/Replace CPT.

Retrace line is visible.

Screen is black.

Check the waveform at pin 73 of IC1111.
Check FBT & CPT socket & CPT.
Check the waveform at pin 31~34,37~44,47~50 of IC1111.

Check the waveform at pin 19 of TU101.

Check/Replace IC1111.

Check the waveform at pin 1~7,10~17,63~64 of IC1112.
Check/Replace Q203,Q205,IC201.

Check/Replace IC101.

Check/Replace IC1112.
Check the waveform at pin 54~61 of IC1113.

Check/Replace IC1113

Check/Replace IC1113,Q1107~1120.

- 21 -

Check the voltage at pin3,13 of IC652(SOUND AMP). 15V

D850,F851.

5V CHECK/REPLACE 601,Q602,IC652.
0V CHECK/REPLACE T101. CHECK/REPLACE T101,Q109.

CHECK/REPLACE T101.

Check the waveform at pin 11 of P901B. NORMAL Check/Replace D2909~10, Q2902,Q2907~2910.

IC1113,Q1110~Q1112.

PIN CUSHION

21 IC1113.

IC1113.

Q404, Q405.

- 22 -
Check the waveform at pin 21,22 of IC601.

Check / Replace IC601.

Check the waveform at pin 1,3 of IC602.
Check / Replace H/P JACK.

Check / Replace IC602.

DON'T CATCH CHANNEL(MAIN)
Check the voltage at pin9 of TUNER(33V).
Check/Replace R403,FB854,D861,ZD102.
Check the voltage at pin13 of TUNER(5V).
Check the waveform at pin19 of T101(CVBS OUT).
Check/Replace R124,IC101.

Check/Replace IC104

Check the waveform at pin73 of IC1111.

Check/Replace IC16,IC11.

Check/Replace Q108,Q1272,F1201,IC1101.
Check the voltage at pin 14 of T101.
Check the voltage at pin 14 of T101. 2.5V 0V CHECK/REPLACE Q107,IC11.

CHECK/REPLACE R127,IC11.

- 23 -
Check the waveform at pin 12 of IC11.
NO Check / Replace Q1274,IC1101.
NORMAL Check / Replace IC11.
Check the voltage at pin 1,6 of IC301.
Check / Replace FR359,FR360,D339,D349.
Check the waveform at pin 19,20 of IC1113.
Check / Replace IC1113,Q1118,Q1121
Check / Replace IC301, D301.

- 24 -

WIRING DIAGRAM

CABINET

CPT PWB

P1201A

"B"

"A"

P650 P651 P12 P1201B P901B P801A P601A P902A

MAIN PWB ASSY

- 25 -

AV-1 H/P OUT

TDA-2822 H/P AMP

MAIN SPEAKER L R

TUNER-2
SOUND Processor AF(SECAM L) H/V SYNC SELECTED CVBS FOR MAIN 8 VPC-3230 SDA-9401 COLOR Digital Y Digital Y SCAN DECODER RATE 2H/2V Digital & SYNC Chroma CONVERT ADC 8 Digital Chroma

TUNER-1

MSP-3410D

TDA-7297 SOUND AMP

FOR PIP WITH IF PART

FOR MAIN WITH IF PART

TO Cathode 0f CPT
TV-CVBS PIP-CVBS H/V SYNC
DDP-3310 Deflection & RGB TDA-6111Q RGB AMP RGB Processor & DAC

BLOCK DIAGRAM

- 26 -

I 2C Bus

LA-7845
Vetical Deflection AT24C16 EEPROM OSD RGB & FB 2H 2H 2V SYNC

C-5446

Horizontal Deflection

TO FBT & DY

AV-3 & FB
SDA-9489X CXA-2040 PIP AV SELECTED Processor RGB SWITCH

Y&C

CVBS FOR PIP
SCART-RGB & FB 3 Y, Pb,Pr

SDA-5555

MICRO- Processor Tilt Control

Tilt Controller

TO TILT COIL

- 27 -

EXPLODED VIEW

170 112

530 540

126 520

- 28 -

EXPLODED VIEW PARTS LIST

LOCA. NO PART NO DESCRIPTIONS
The components identified by mark critical for safety. Replace only with part number specified.

112 120

6341V29005A 120-D38C 6400VA0035A
CPT ASSY,2426GF239AT 100HZ DY SPEAKER,MID-RANGE 8 OHM 15/25W SPEAKER,F305C-6169-D38C K.TONE 8 OHM SPEAKER,TWEETER TOHM COVER,DOME PS BRACKET,DOME(R) PS BRACKET,DOME(L) PS COIL,DEGAUSSING 29 FLAT ASSY(W) SELLA DY,DC29SLFL2 CPT EARTH,29 98T 4LUG CABINET ASSY CABINET ASSY (SILVER) BUTTON,CONTROL 6KEY DOOR,FRONT SPRING,KNOB BUTTON,POWER BACK COVER ASSY BACK COVER ASSY (SILVER) BRACKET,MAIN BOARD,A/V(2SCART) PWB ASSY,LG29 CPT,SET PWB ASSY,MAIN(017A) RE29FA31P,SET PWB ASSY,MAIN(017A) RE29FA33PX PWB ASSY,MAIN(017A) RL29FA33PX PWB ASSY,MAIN(017A) RE29FA33X PWB ASSY,MAIN(017A) RL29FA33X PWB ASSY,SMPS (017A) EU,W/STBY,LG29,SET PWB ASSY,SMPS (017A) EU,W/0 STBY,LG29,SET PWB ASSY,SMPS (017A) EU,W/0 STBY,LG29 CKD PWB ASSY,SMPS (017A) EU,W/0 STBY,LG29,CKD PWB ASSY,(017A) 100HZ,EU,W/PIP PWB ASSY,(017A) EU,W/O PIP PWB ASSY,(017A)CTRL-FA30,SET PWB ASSY,(017A) SIDE,FA30,SET IC,CDS SENSOR MODULE(P1201-04) SCREW ASSY,HEXAGON HEAD SPECIAL SCREW,TAP TITE(P) D4.0 L16.0 MSWR3/FZB CORD,POWER W/FILTER L=300(179B)VDE

170 300

6400VG0002A 3550V00068A 4810V00165A 4810V00165B 6140VC2005F 6150Z-1340F 170-844K 3091V00316B 3091V00316F
5020V00480A 3580V00058B 320-062E 5020V00479A 3809V00234C 3809V00234H

510 520

4810V00379D 3500V00022C 6871VSM889A 6871VMM759A 6871VMM759M 6871VMM812B 6871VMM812X 6871VMM812W
6871VPM063A 6871VPM063J 6871VPM072A 6871VPM072B

6871VSM913A 6871VSM913B

943 P801
6871VSM866A 6871VSM922A 0IGL120104A 332-229A 1PTF0403116 174-322D

- 29 -

The components identified by mark are critical for safety. Replace only with part number specified.

REPLACEMENT PARTS LIST

DESCRIPTION LOCA. NO D414 D425 PART NO 0DD100009AE 0DS113379BA 0DD060009AC 0DD100009AM 0DD414809ED 0ISK100300A 0DD060009AC 0DD060009AC 0DD060009AC 0DD060009AC 0DD060009AC 0DD414809ED 0DD414809ED 0DD420000BB 0DD100009AU 0DD414809ED 0DD414809ED 0DR060009AA 0DR060009AA 0DR060009AA 0DD400509AA 0DD414809ED 0DD414809ED 0DD414809ED 0DD414809ED 0DD414809ED 0DD414809ED 0DD414809ED 0DD414809ED 0DD150009CA 0DD150009CA 0DD414809ED 0DRGS00011A 162-002B 0DZ680009AN 0DZ910009BD 0DZ680009AN 0DZ330009BA 0DZ330009BA 0DZ910009AJ 0DZ510009BF 0DZ620009BB 0DZ180009BE 0DZ121109AA DESCRIPTION DIODE,RECTIFIER RU1A V(1) TP DIODE,SWITCHING 1SS133 T-72 TP ROHM DIODE,TVR06J 0.6A/600V 250NS TP G.I DIODE,RECTIFIER EU1ZV(1) TP DIODE,1N4148 TA IC,SLA1003 SIP12 BK DIODE MODULE( DIODE,TVR06J 0.6A/600V 250NS TP G.I DIODE,TVR06J 0.6A/600V 250NS TP G.I DIODE,TVR06J 0.6A/600V 250NS TP G.I DIODE,TVR06J 0.6A/600V 250NS TP G.I DIODE,TVR06J 0.6A/600V 250NS TP G.I DIODE,1N4148 TA DIODE,1N4148 TA DIODE,D4L20U SHINDENGEN DIODE,RECTIFIER EU1AV(1) TP DIODE,1N4148 TA DIODE,1N4148 TA DIODE,RECTIFIER TVR06J TP DIODE,RECTIFIER TVR06J TP DIODE,RECTIFIER TVR06J TP DIODE,RECTIFIER 1N4005 GP DIODE,1N4148 TA DIODE,1N4148 TA DIODE,1N4148 TA DIODE,1N4148 TA DIODE,1N4148 TA DIODE,1N4148 TA DIODE,1N4148 TA DIODE,1N4148 TA DIODE,RECTIFIER RGP15J,TP(52MM),GI DIODE,RECTIFIER RGP15J,TP(52MM),GI DIODE,1N4148 TA DIODE,RECTIFIERS GSIB660 DIODE LED ASSY DIODE,ZENER GDZJ6.8B TP GRANDE DO34 0.5W DIODE,ZENER GDZJ9.1B TP GRANDE DO34 0.5W DIODE,ZENER GDZJ6.8B DIODE,ZENER HZT33(TP) HITACHI DIODE,ZENER HZT33(TP) HITACHI DIODE,ZENER MTZJ9.1B TP ROHM-K DIODE,ZENER GDZ5.1B TP GRADE DIODE,ZENER MTZJ6.2B TP ROHM-K DO34 0.5W DIODE,ZENER GDZJ18B TP GRANDE DO34 0.5W DIODE,ZENER DTZ12BTT11(CHIP) TP ROHM

ZD650 ZD901 ZD1201

TRANSISTOR
Q15 Q16 Q18 Q101 Q102 Q103 Q104 0TR945009AA 0TR945009AA 0TR945009AA 0TR945009AA 0TR945009AA 0TR733009AA 0TR127009AA TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSC733C-Y TP SAMSUNG TR,KTA1270-TP-Y (KTA562TM)KEC

- 30 -

For Capacitor & Resistors, the charactors at 2nd and 3rd digit in the P/No. means as follows;
CC, CX, CK, CN : Ceramic CQ : Polyestor CE : Electrolytic
RD : Carbon Film RS : Metal Oxide Film RN : Metal Film RF : Fusible
The components identified by mark are critical for safety. Replace only with part number specified. LOCA. NO Q2902 Q2907 Q2908 Q2909 Q2910 PART NO 0TR319809AA 0TR126609AA 0TR319809AA 0TR165900AC 0TR437000BA DESCRIPTION TR,KTC3198-TP-Y (KTC1815)KEC TR,KTA1266-TP-Y (KTA1015) KEC TR,KTC3198-TP-Y (KTC1815)KEC TR,KTA1659A-Y TO-220IS BK KEC - TR,KTC4370A-Y TO-220IS KEC
LOCA. NO Q105 Q107 Q108 Q109 Q150 Q151 Q152 Q153 Q154 Q155 Q156 Q157 Q203 Q308 Q401 Q402 Q404 Q405 Q601 Q602 Q651 Q851 Q852 Q853 Q854 Q855 Q856 Q857 Q871 Q900 Q1107 Q1108 Q1109 Q1110 Q1111 Q1112 Q1113 Q1114 Q1115 Q1116 Q1117 Q1118 Q1119 Q1120 Q1121 Q1270 Q1271 Q1272 Q1273 Q1274 Q1275 Q1501
PART NO 0TR945009AA 0TR945009AA 0TR945009AA 0TR945009AA 0TR945009AA 0TR733009AA 0TR733009AA 0TR945009AA 0TR945009AA 0TR733009AA 0TR733009AA 0TR945009AA 0TR733009AA 0TR945009AA 0TF200000AA 0TR544600AA 0TR127509AC 0TR205900AB 0TR733009AA 0TR733009AA 0TR945009AA 0TR945009AA 0TR322709AA 0TR945009AA 0TR322709AA 0TR421009AB 0TR945009AA 0TR320209AA 0TR945009AA 0TR127109AA 0TR387500AA 0TR387500AA 0TR150400BA 0TR387500AA 0TR387500AA 0TR150400BA 0TR387500AA 0TR387500AA 0TR150400BA 0TR387500AA 0TR387500AA 0TR150400BA 0TR387500AA 0TR150400BA 0TR150400BA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR945009AA
DESCRIPTION TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSA733C-Y TP SAMSUNG TO-92 TR,KSA733C-Y TP SAMSUNG TO-92 TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KSA733C-Y TP SAMSUNG TO-92 TR,KSA733C-Y TP SAMSUNG TO-92 TR,KSC945C-Y TP SAMSUNG TR,KSA733C-Y TP SAMSUNG TO-92 TR,KSC945C-Y TP SAMSUNG TR,IRFIBC20G BK I.R 600V - TR,2SC5446(AS) BK TOSHIBA TO3P 17 TR,KTA1275-Y TP(KTA1013),KEC TR,KTD2059-Y TO-220IS KEC TR,KSA733C-Y TP SAMSUNG TO-92 TR,KSA733C-Y TP SAMSUNG TO-92 TR,KSC945C-Y TP SAMSUNG TR,KSC945C-Y TP SAMSUNG TR,KTC3227-Y,TP(KTC1627A),KEC TR,KSC945C-Y TP SAMSUNG TR,KTC3227-Y,TP(KTC1627A),KEC TR,BF421 TR,KSC945C-Y TP SAMSUNG TR,KTC3202-TP-Y (KTC1959)KEC TR,KSC945C-Y TP SAMSUNG TR,KTA1271-TP-Y (KTA950)KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SA1504S(ASY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SA1504S(ASY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SA1504S(ASY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SA1504S(ASY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SA1504S(ASY) KEC TR,CHIP 2SA1504S(ASY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,CHIP 2SC3875S(ALY) KEC TR,KSC945C-Y TP SAMSUNG

- 32 -

The components identified by mark are critical for safety. Replace only with part number specified. LOCA. NO C867 C870 C871 C872 C873 C900 C901 C902 C903 C904 C905 C906 C907 C910 C911 C912 C914 C915 C916 C917 C918 C919 C920 C925 C927 C928 C1002 C1003 C1005 C1006 C1007 C1008 C1100 C1101 C1102 C1103 C1104 C1105 C1109 C1116 C1119 C1120 C1121 C1127 C1131 C1134 C1135 C1138 C1140 C1144 C1146 C1147 PART NO 0CE107DN618 181-091D 0CE227DP650 0CE107CP618 0CQ1041N509 0CE475BR618 0CE475BR618 0CE475DR618 0CC0500K115 0CE475BR618 0CK5610W515 0CN1040K949 0CN1040K949 0CE225DK618 0CN1040K949 0CN1040K949 0CE228DF618 0CK5610W515 181-033T 0CN1040K949 0CC0500K115 0CK5610W515 0CC5600K415 0CN1040K949 0CC4700K415 0CC3300K415 0CN4710K519 0CN4710K519 0CN2210K519 0CN2210K519 0CN4710K519 0CN4710K519 0CK224DF56A 0CK224DF56A 0CK224DF56A 0CK224DF56A 0CK224DF56A 0CK224DF56A 0CK224DF56A 0CE474CK636 0CE474CK636 0CE474CK636 0CE476DF618 0CE106DF618 0CQ1021N519 0CK224DF56A 0CE476DF618 0CE107DF618 0CE336DF618 0CE106DF618 0CE106DF618 0CE227DF618 DESCRIPTION 100UF STD 100V M FL TP5 DE0905-979 R 102K 1KV TP5 220UF STD 160V M FM7.5 BULK 100U SHL 160V M FL TP5 0.1U 100V K POLY TP
LOCA. NO C635 C636 C637 C638 C639 C640 C641 C642 C643 C644 C645 C646 C648 C649 C650 C651 C652 C653 C654 C655 C656 C657 C660 C661 C680 C803 C806 C807 C808 C809 C811 C812 C813 C814 C815 C816 C821 C824 C851 C853 C854 C855 C856 C857 C858 C859 C860 C861 C862 C863 C864 C866
PART NO 0CN2720F569 0CN2720F569 0CN1030F679 0CN1030F679 181-442Z 181-442Z 0CN1020K519 0CN1020K519 0CE107DF618 0CE107DF618 0CE107DF618 0CE107DF618 0CN1030F679 0CN1040K949 0CE108DH618 0CN2230H949 0CQ2242K439 0CN3320F569 0CN1030F679 0CQ2242K439 0CN3320F569 0CE476DD618 0CN1220F569 0CN1220F569 0CN1040K949 181-091G 181-014Y 181-091C 0CE107BJ618 0CK1020K515 181-120K 0CK1020W515 181-091D 0CQZVBK002A 181-091C 181-091D 181-001Y 0CQZVBK002C 0CK1020W515 0CE477DF618 0CE107DF618 0CE107DD618 181-091C 0CE228DF618 0CE477DF618 181-091C 0CE477DF618 0CE228DF618 0CE475CK636 181-091C 0CE108DH618 0CK4710K515
DESCRIPTION 2700P 16V K X TA52 2700P 16V K X TA52 10000P 16V M Y TA52 10000P 16V M Y TA52 PE,ECQ-B1H104KF3(TR) PE,ECQ-B1H104KF3(TR) 1000P 50V K B TA52 1000P 50V K B TA52 100UF STD 16V M FL TP5 100UF STD 16V M FL TP5 100UF STD 16V M FL TP5 100UF STD 16V M FL TP5 10000P 16V M Y TA52 0.1M 50V Z F TA52 1000UF STD 25V M FL TP5 22000P 25V Z FTA52 0.2200UF S 50V J M/PE NI TP 3300P 16V K X TA52 10000P 16V M Y TA52 0.2200UF S 50V J M/PE NI TP 3300P 16V K X TA52 47UF STD 10V 20% FL TP 5 1200P 16V K X TA52 1200P 16V K X TA52 0.1M 50V Z F TA52 DE0907-486 R 471K 2KV TP7.5 MPP 1.6KV 0.0015UF J DE0705-979 R 471K 1KV TP5 100UF KME 35V M FL TP5 1000P 50V KB TS

RESISTOR

F851 F853 F855 FB854 FR359 FR360 FR443 FR448 FR2948 J105 J229 R11 R12 R13 R14 R15 R16 R17 R18 R19 R20 R21 R22 R23 R24 R25 R26 R27 R28 R29 R30 R31 R32 0RP0020J809 0RP0050H709 0RP0050H709 0RF0470H609 0RF0680K607 0RF0680K607 0RF0101H609 0RF0470K607 0RF1000H609 0RD4700F609 0RD3300F609 0RD0472F609 0RD0472F609 0RD1001F609 0RD1000F609 0RD1002F609 0RD1000F609 0RD1000F609 0RD1002F609 0RD1000F609 0RD5602F609 0RD5602F609 0RD3302F609 0RD1002F609 0RD3302F609 0RD1001F609 0RD3901F609 0RD1002F609 0RD2701F609 0RD1200F609 0RD4701F609 0RD4701F609 0RD1000F609 0.02 OHM 1W 20% TA52 0.05 OHM 1/2W 10% TA52 0.05 OHM 1/2W 10% TA52 0.47 OHM 1/2 W 5.00% TA52 0.68 OHM 2 W 5.00% TA62 0.68 OHM 2 W 5.00% TAOHM 1/2 W 5.00% TA52 0.47 OHM 2 W 5.00% TAOHM 1/2 W 5.00% TAOHM 1/6W 5 330OHM 1/6W OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 56K OHM 1/6 W 5.00% TA52 56K OHM 1/6 W 5.00% TA52 33K OHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TA52 33K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 3.9K OHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TA52 2.7K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 4.7K OHM 1/6 W 5.00% TA52 4.7K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52

- 35 -

The components identified by mark are critical for safety. Replace only with part number specified. LOCA. NO R109 R110 R111 R112 R113 R114 R115 R116 R117 R119 R120 R125 R126 R127 R128 R129 R130 R131 R132 R133 R134 R135 R136 R137 R138 R150 R151 R152 R153 R154 R155 R156 R157 R158 R159 R160 R161 R162 R163 R203 R205 R211 R216 R217 R218 R219 R221 R224 R225 R311 R312 R313 PART NO 0RD1000F609 0RD1000F609 0RD1001F609 0RD1001F609 0RD0102F609 0RD1002F609 0RD1002F609 0RD1002F609 0RD2201F609 0RD0102F609 0RD1300F609 0RD1000F609 0RD1000F609 0RD1000F609 0RD0222F609 0RD1000F609 0RD1000F609 0RD2200F609 0RD0752F609 0RD0822F609 0RD1001F609 0RS1801H609 0RD1002F609 0RD1002F609 0RD0102F609 0RD1001F609 0RD3002F609 0RD1002F609 0RD1003F609 0RD1801F609 0RD1801F609 0RD4701F609 0RD4701F609 0RD4701F609 0RD5103F609 0RD5602F609 0RD5602F609 0RD2202F609 0RD1000F609 0RD1000F609 0RD2200F609 0RD0752F609 0RD0752F609 0RD0752F609 0RD0752F609 0RD0752F609 0RD0752F609 0RD0752F609 0RD0752F609 0RD1002F609 0RD2202F609 0RD1001F609 DESCRIPTION 100 OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TA52 2.2K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 1.8K OHM 1/2 W 5.00% TA52 10K OHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 30K OHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TA52 100K OHM 1/6 W 5.00% TA52 1.8K OHM 1/6 W 5.00% TA52 1.8K OHM 1/6 W 5.00% TA52 4.7K OHM 1/6 W 5.00% TA52 4.7K OHM 1/6 W 5.00% TA52 4.7K OHM 1/6 W 5.00% TA52 510K OHM 1/6 W 5.00% TA52 56K OHM 1/6 W 5.00% TA52 56K OHM 1/6 W 5.00% TA52 22K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 10K OHM 1/6 W 5.00% TA52 22K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52

LOCA. NO R314 R318 R324 R326 R327 R328 R329 R330 R401 R402 R403 R404 R405 R406 R407 R408 R410 R413 R414 R415 R416 R417 R418 R419 R420 R421 R422 R423 R424 R425 R426 R450 R451 R490 R601 R602 R605 R606 R607 R608 R609 R610 R611 R612 R613 R614 R615 R616 R617 R618 R619 R620
PART NO 0RD3001F609 0RS0331K619 0RD1001F609 0RN1801F409 0RN1801F409 0RS2200K607 0RN0271J607 0RN0151J607 0RD1002F609 0RD1000F609 0RS1001K619 0RS4701K619 180-A01B 0RS0561K619 0RS1001K607 0RD3301A609 0RD3301F609 0RN4701F409 0RD6802F609 0RD1000F609 0RN5602F409 0RD4700F609 0RD2001A609 0RN1501F409 0RD1001F609 0RD0221F609 0RD1001A609 0RD2701A609 0RS0561K607 0RD2400A609 0RD1000A609 0RD0221A609 180-C02M 180-B01E 0RD3602F609 0RD3602F609 0RD1001F609 0RD1001F609 0RD1001F609 0RD1001F609 0RD1001F609 0RD1001F609 0RD1000F609 0RD0102F609 0RD1000F609 0RD3302F609 0RD3302F609 0RD1501F609 0RD1501F609 0RD0471F609 0RD0471F609 0RD0271F609
DESCRIPTION 3K OHM 1/6 W 5.00% TA52 3.3 OHM 2 W 5% TR 1K OHM 1/6 W 5.00% TA52 1.8K OHM 1/6 W 1.00% TA52 1.8K OHM 1/6 W 1.00% TAOHM 2 W 5.00% TA62 2.7 OHM 1 W 5.00% TA62 1.5 OHM 1 W 5.00% TA62 10K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 1K OHM 2 W 5% TR 4.7K OHM 2 W 5% TR RW ROUND G 2W 0.11 K TA31(63) 5.6 OHM 2 W 5% TR 1K OHM 2 W 5.00% TA62 3.3K OHM 1/2 W(7.0) 5.00% TA52 3.3K OHM 1/6 W 5.00% TA52 4.7K OHM 1/6 W 1.00% TA52 68K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 56K OHM 1/6 W 1.00% TAOHM 1/6 W 5.00% TA52 2K OHM 1/2 W(7.0) 5.00% TA52 1.5K OHM 1/6 W 1.00% TA52 1K OHM 1/6 W 5.00% TA52 2.2 OHM 1/6 W 5.00% TA52 1K OHM 1/2 W(7.0) 5.00% TA52 2.7K OHM 1/2 W(7.0) 5.00% TA52 5.6 OHM 2 W 5.00% TAOHM 1/2 W(7.0) 5.00% TAOHM 1/2 W(7.0) 5.00% TA52 2.2 OHM 1/2 W(7.0) 5.00% TA52 5.6K OHM 1/2 W 10% TA52 ERC12G RS RECT S 5W 15K J DOUBLE 36K OHM 1/6 W 5.00% TA52 36K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TA52 1K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 33K OHM 1/6 W 5.00% TA52 33K OHM 1/6 W 5.00% TA52 1.5K OHM 1/6 W 5.00% TA52 1.5K OHM 1/6 W 5.00% TA52 4.7 OHM 1/6 W 5.00% TA52 4.7 OHM 1/6 W 5.00% TA52 2.7 OHM 1/6 W 5.00% TA52

- 36 -

The components identified by mark are critical for safety. Replace only with part number specified. LOCA. NO R946 R947 R1002 R1003 R1005 R1006 R1007 R1501 R1502 R1503 R1504 R2906 R2907 R2908 R2909 R2910 R2911 R2912 R2921 R2922 R2928 R2929 R2930 R2931 R2932 R2933 R2934 R2935 R2936 R2937 R2938 R2939 R2940 R2941 R2942 R2943 R2944 R2945 R2946 R2947 R2955 R2959 R2990 PART NO 0RD1001F609 0RD2401F609 0RD2403F609 0RD2403F609 0RD0752F609 0RD0752F609 0RD0752F609 0RD0472F609 0RD3300F609 0RD1801F609 0RD4701F609 0RD1500F609 0RD1600F609 0RD3001F609 0RD1500F609 0RD3001F609 0RD5601F609 0RD3001F609 0RD3000H609 0RD3000H609 0RD0102F609 0RD1000F609 0RD0102F609 0RD1000F609 0RD0822F609 0RD0822F609 0RF0102J607 0RD1202H609 0RD2001H609 0RD5602H609 0RD5602H609 0RD1201H609 0RD1501H609 0RD1501H609 0RD0391H609 0RD0472H609 0RD0391H609 0RD0472H609 0RS8200J607 0RS8200J607 0RD2202H609 0RD5101F609 0RD0222F609 DESCRIPTION 1K OHM 1/6 W 5.00% TA52 2.4K OHM 1/6 W 5.00% TA52 240K OHM 1/6 W 5.00% TA52 240K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 1.8K OHM 1/6 W 5.00% TA52 4.7K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 3K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52 3K OHM 1/6 W 5.00% TA52 5.6K OHM 1/6 W 5.00% TA52 3K OHM 1/6 W 5.00% TAOHM 1/2 W 5.00% TAOHM 1/2 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1 W 5.00% TA62 12K OHM 1/2 W 5.00% TA52 2K OHM 1/2 W 5.00% TA52 56K OHM 1/2 W 5.00% TA52 56K OHM 1/2 W 5.00% TA52 1.2K OHM 1/2 W 5.00% TA52 1.5K OHM 1/2 W 5.00% TA52 1.5K OHM 1/2 W 5.00% TA52 3.9 OHM 1/2 W 5.00% TAOHM 1/2 W 5.00% TA52 3.9 OHM 1/2 W 5.00% TAOHM 1/2 W 5.00% TAOHM 1 W 5.00% TAOHM 1 W 5.00% TA62 22K OHM 1/2 W 5.00% TA52 5.1K OHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TA52