The attenuation may rise by 0.2% / with a rising ambient temperature
The Example of Measurement for V.S.W.R & Attenuation
(Tested by Network Analyzer)

V.S.W.R (Return Loss)

Max. 1. 0826 (28.0dB) at 30MHz ~ 3000MHz

Attenuation

19.41 dB/100M (at 2000MHz)
9 LG RF Transmission Line
1/2" Super Flexible Foam Dielectric.3/8" Super Flexible Foam Dielectric

HFSC 12D / HFSC-FR 12D

Inner Conductor Material / Construction Diameter Dielectric Material / Construction Diameter Outer conductor Material / Construction Diameter Jacket Diameter Standard Jacket Halogen-Free / Fire-Retardant jacket Copper-Clad Aluminum Wire 3.6 mm Foamed Polyethylene 8.9 mm Helically Corrugated Copper Tube 12.2 mm 13.6 mm 13.6 mm
Minimum Bending Radius Recommended Operating Temperature Standard Jacket Halogen-Free / Fire-Retardant jacket Nominal Weight Standard Jacket Halogen-Free / Fire-Retardant jacket Flat Plate Crush Resistance Max. Pulling Force 32 mm -40 ~ +80 -30 ~ +kg / km 207 kg / km 1.7 kg / mm 65 kg
DC Resistance Inner Conductor Outer Conductor Insulation Resistance Dielectric Strength Velocity of Propagation Peak Power Rating Max. Operating Frequency Characteristic Impedance Return Loss (Typical value over the cellular, PCS and 3G bands with LG Connectors) 2.85 ohms/1000m (0.87 ohms/1000ft) 3.25 ohms/1000m (0.99 ohms/1000ft) 10,000 km DC 2,500V for 1 minute 81% 15.6 kW 10.0 GHz dB
10 LG RF Transmission Line
Attenuation (at 20) & Average Power Rating (at Ambient 40, Inner conductor 100)
30MHz 100MHz 150MHz 450MHz 824MHz 890MHz 960MHz 1000MHz 1700MHz 1800MHz 2000MHz 2300MHz 3000MHz 3400MHz 4000MHz 5000MHz 1.80 3.33 4.10 7.31 10.11 10.52 11.03 11.20 15.21 15.60 16.51 17.85 20.78 22.37 24.49 27.51 0.55 1.01 1.25 2.23 3.08 3.21 3.36 3.41 4.64 4.75 5.03 5.44 6.33 6.82 7.46 8.38 4.79 2.59 2.10 1.18 0.853 0.820 0.782 0.770 0.567 0.553 0.484 0.415 0.386 0.352 0.310 0.523
The Examples of Measurement for V.S.W.R & Attenuation

V.S.W.R. (Return Loss)

Max. 1.0881 (27.4dB) at 30MHz ~ 3000MHz
16.68dB/100M (at 2000MHz)

Frequency (MHz)

1/2" Flexible Foam Dielectric.

HFC 12D / HFC-FR 12D

Inner Conductor Material / Construction Diameter Dielectric Material / Construction Diameter Outer Conductor Material / Construction Diameter Jacket Diameter Standard Jacket Halogen-Free / Fire-Retardant jacket Copper-Clad Aluminum Wire 4.8 mm Foamed Polyethylene 12.0 mm Annularly Corrugated Copper Tube 13.8 mm 16.0 mm 16.0 mm
Minimum Bending Radius Recommended Operating Temperature Standard Jacket Halogen-Free / Fire-Retardant jacket Nominal Weight Standard Jacket Halogen-Free / Fire-Retardant jacket Flat Plate Crush Resistance Max. Pulling Force 125 mm -40 ~ +80 -30 ~ +kg / km 261 kg / km 2.0 kg / mm 113 kg

0.11 0.20 0.26 0.47 0.66 0.69 0.73 0.74 1.02 1.06 1.13 1.24 1.31
30.52 16.40 13.08 6.95 4.80 4.62 4.43 4.31 3.12 2.98 2.76 2.51 2.37
Max. 1.049 (32.4dB) at 30MHz ~ 3000MHz
3.71dB /100M (at 2000MHz)
19 LG RF Transmission Line

Jacket Option

HFC & HFSC Series Cables with the standard jacket meet the following requirements
IEC 754-1 IEC 754-2 Halogen acid gas content (Chlorium < 0.5%) Degree of acidity of gas ( PH-Value > 4.0, Conductivity < 100 /cm)
HFC & HFSC Series Cables with the fire-retardant jacket meet the following requirements
IEC 754-1 IEC 754-2 IEC 332-3C IEEE 383 IEC 332-1 ASTM E 662 Halogen acid gas content (Chlorium < 0.5%) Degree of acidity of gas ( PH-Value > 4.0, Conductivity < 100 /cm) Flammability test on cable bundles Flammability test on cable bundles Flammability test on single cable Optical density of smoke ( Smoke-density < 150)

Cable Type

HFSC 12D HFC 12D HFC 22D HFC 33D HFC 42D HFSC-FR 12D HFC-FR 12D HFC-FR 22D HFC-FR 33D HFC-FR 42D

Jacket

IEC 754-1

IEC 754-2

IEC 332-1

IEC 332-3C

IEEE 383

ASTM E662

Standard Black PE
Halogen-Free Fire-Retardant Black Compound
20 LG RF Transmission Line

Packing Information

Standard Cable Drum Type Length

Drum Type A B C D E

Drum Quantity of Drum in a Container Weight 20ft 40ft (Kg)

1-5/8"

HFC 42D HFC-FR 42D

L 16-2

1-1/4"

HFC 33D HFC-FR 33D

L 14-3

7/8"

HFC 22D HFC-FR 22D

L 10-3

1/2"
HFC 12D HFC-FR 12D HFSC 12D HFSC-FR 12D
Other reel length for each cable type can be available on request.
21 LG RF Transmission Line
for Underground Applications
For train radio systems, mobile communications, etc., an important factor is to maintain high quality communications at all locations, such as in tunnels and underground as well as in open area. The radiating coaxial cable functions as a continuous antenna to solve RF coverage problems in shielded areas such as tunnels, buildings and other underground spaces. Slots in the outer conductor allow some of the transmission energy to radiate from inside toward outside of the cable and form an almost uniform electrical field circumferentially around the cables. Because of this feature, users can communicate by receiving the radiated energy with an adequately coupled radio antenna equipment. LG has a wide range of cables that are optimized for nearly every application.
Coupling Loss Measurement
Coupling Loss of "RFCX & RFCL Series radiating cables are measured by ground level method according to IEC 1196-4. Cable Type : RFCX-FR 42D Meas. Date : 2001.5.3 Length : 50m Input Power : 10dBm Frequency : 90MHz Antenna Type : Biconical Antenna Gain : 2.8dBd Antenna distance from cable : 2m Coupling Loss(50%) [dB] : 68.6 Coupling Loss(95%) [dB] : 77.6

6.457 6.607 6.761 6.918 6.980 7.244 7.413 7.588 7.762 7.830 7.943 8.128 8.26 8.318 8.511 8.680 9.090 9.910 10.310 10.710 11.110 11.500 11.890 12.280 12.660 13.040 13.420 14.160 14.890 15.250 15.610 15.970 6.320 6.600
23.80 23.60 23.40 23.20 23.13 22.80 22.60 22.40 22.20 22.12 22.00 21.80 21.66 21.60 21.40 21.23 20.83 20.08 19.73 19.40 19.08 18.48 18.49 18.22 17.95 17.69 17.45 16.98 16.54 16.33 16.13 15.94 15.75 15.60
33 LG RF Transmission Line
The reflection coefficient sums up the effects of all the impedance variations within the cable and its end at a certain frequency. Return Loss and V.S.W.R is usually used instead of reflection coefficient. The following formulas can be used for converting among the Returns Loss, Reflection Coefficient and V.S.W.R.

Jumper Cable

Product Code for Jumper Cable
LG Cable provide Coaxial Jumper cable which are outstanding electrical performance along with high durability for tight routing and superior environmental sealing for long life reliability. LG coaxial jumper cables are offered in sizes of 3/8 " and 1/2". Jumper cables are used in areas that require extremely small bending radius such as on the connection between main feeders and antennas, or between main feeders and RF-equipments. LG coaxial jumper cables are planned and produced to have features as belows.
- High Pull-off strength - Excellent V.S.W.R Performance : Typical V.S.W.R over Cellular, PCS and 3G-Band is 1.08 - Excellent Flexibility : Minimum Bending radius - Low and stable intermodulation : Typical IM3 Product value with 40dBm is - 160dBc over the Cellular and PCS bands. - Complete Weather-proofing

Cable Type Min. B.R.

HFSC 10D 25mm

HFSC 12D 32mm

HFC 12D 125mm
34 LG RF Transmission Line
Description of attached connector
7/16 Male to 7/16 Male 7/16 Male to 7/16 Female 7/16 Female to 7/16 Female N Male to 7/16 Male N Female to 7/16 Female N Male to 7/16 Female N Female to 7/16 Male N Male to N Male N Male to N Female N Female to N Female
JHFS10-1-DMDM JHFS10-1-DMDF JHFS10-1-DFDF JHFS10-1-NMDM JHFS10-1-NFDF JHFS10-1-NMDF JHFS10-1-NFDM JHFS10-1-NMNM JHFS10-1 NMNF JHFS10-1-NFNF

HFSC 10D 2M

JHFS10-2-DMDM JHFS10-2-DMDF JHFS10-2-DFDF JHFS10-2-NMDM JHFS10-2-NFDF JHFS10-2-NMDF JHFS10-2-NFDM JHFS10-2-NMNM JHFS10-2-NMNF JHFS10-2-NFNF
JHFS10-3-DMDM JHFS10-3-DMDF JHFS10-3-DFDF JHFS10-3-NMDM JHFS10-3-NFDF JHFS10-3-NMDF JHFS10-3-NFDM JHFS10-3-NMNM JHFS10-3-NMNF JHFS10-3-NFNF
JHFS12-1-DMDM JHFS12-1-DMDF JHFS12-1-DFDF JHFS12-1-NMDM JHFS12-1-NFDF JHFS12-1-NMDF JHFS12-1-NFDM JHFS12-1-NMNM JHFS12-1 NMNF JHFS12-1-NFNF

HFSC 12D 2M

JHFS12-2-DMDM JHFS12-2-DMDF JHFS12-2-DFDF JHFS12-2-NMDM JHFS12-2-NFDF JHFS12-2-NMDF JHFS12-2-NFDM JHFS12-2-NMNM JHFS12-2-NMNF JHFS12-2-NFNF

Featuring

Cut Jacketing and Outer Conductor Cut Jacketing and Outer Conductor Cut Jacketing, Out Conductor, Dielectric & Inner Conductor Cut Jacketing, Out Conductor, Dielectric & Inner Conductor Cut Jacketing, Out Conductor, Dielectric & Inner Conductor
CT-12D CT-12DS CT-22D CT-33D CT-42D

Hanger Solutions

Specifications
App Size Design Feature Mounts to Material Incl. Order Sep. Coax Support 1/2 1-5/8 to coax Two-run block hangers Compact coax bundles 3/8 10mm threaded rod or Long glass polypropylene Blocks only 3/8 10mm mounting hardware kits or

Part #

L-CB-12 L-CB-22 L-CB-33 L-CB-42
Mini Coax Support Blocks for 1/2corrugated coax Mini Coax Support Blocks for 7/8 corrugated coax Mini Coax Support Blocks for 1-1/4 corrugated coax Mini Coax Support Blocks for 1-5/8 corrugated coax

Kit Qty.

Kit of 10 Kit of 10 Kit of 10 Kit of 10

Wt. lbs (Wt. kg)

1.0 (0.5) 1.2 (0.5) 1.4 (0.6) 1.8 (0.8)
NOTE: Sizes available for smooth wall coax.
47 LG RF Transmission Line
Mini Coax Support Blocks are second generation block hanger systems designed specifically for wireless applications. Each space-saving unit securely holds two runs of coax, allowing a compact bundle of six runs to be supported by stacking three blocks. By requiring only one threaded rod to secure six runs of coax, material and installation costs are reduced by over 50%. Mini Coax Support Blocks are manufactured of durable, weatherresistant long glass polypropylene, providing thermal, chemical, and UV-resistance even in the most extreme environments. Integrated cable grippers bite into the jacketing on corrugated coax to provide additional support in heavy wind and ice loading conditions. A complete selection of hardware kits and mounting accessories are available to facilitate installations on tower members, walls, roof-tops, wood poles, and other unique applications.

Mini Coax Support Blocks

Hanger Clamps
Hanger Clamps are a next generation hanger solution. Each compact unit holds one run of coax in the smallest area possible, allowing a compact bundle of three runs to be supported by stacking three clamps. By utilizing only on e threaded rod to secure the coax, material and installation costs are significantly reduced while simplifying future expansions. Hanger Clamps are manufactured of durable, weather-resistant, polypropylene or polycarbonate, providing thermal-, chemical-, and UV-resistance even in the most extreme environments. Integrated cable-gripping ridges press into the jacketing of the coax to provide additional support in heavy wind and ice loading conditions. A complete selection of metric and standard hardware kits and mounting accessories are available to facilitate installation on tower members, walls, roof-tops, wood poles, and other unique applications.

App. Size Design Feature Mounts to Material Incl. Order Sep. Coax Support 1/2 1-5/8 to coax Single-run block hangers Compact coax bundles 3/8 10mm threaded rod or Polypropylene (CB-12H & CB-22H) Polycarbonate (CB-33H & CB-42H) Blocks only 3/8 10mm mounting hardware kits or
L-CB-12H L-CB-22H L-CB-33H L-CB-42H
Hanger Clamps for 1/2 corrugated coax Hanger Clamps for 7/8 corrugated coax Hanger Clamps for 1-1/4 corrugated coax Hanger Clamps for 1-5/8 corrugated coax
0.5 (0.2) 1.0 (0.5) 1.3 (0.6) 1.8 (0.8)
These hardware kits allow Hanger Clamps, and Mini and Large Coax Support Blocks to be easily and quickly stacked in 1-, 2- and 3-stack configurations, and then mounted to predrilled holes or used in conjunction with a complete selection of mounting accessories. The mounting hardware kits are comprised of pre-cut threaded rods, nuts, flat washers, and lock washers. Mounting Hardware Kits are available in 3/8or 10mm stainless steel. Separate mounting kits are provided for 1-5/8 which can also be , used to stack any configuration of different size blocks.
App. Size Design Feature Mounts to Material Incl. Order Sep.
Coax Support 3/8 and 10mm versions 1, 2, and 3-stack threaded rod kits Stacks coax blocks 3/8or 10mm stainless steel Threaded rod and hardware Blocks, adaptors
10mm Stainless Steel Hardware Kits
L-HK-SSCB-M10 L-HK-SSCB42-M10 L-HK-DSCB-M10 L-HK-DSCB420-M10 L-HK-TSCB-M10 L-HK-TSCB42-M10
10mm Stainless Steel Hardware Kit for one Coax Support Block 10mm Stainless Steel Hardware Kit for one 1-5/8or Coax Support Block 10mm Stainless Steel Hardware Kit for two Coax Support Block 10mm Stainless Steel Hardware Kit for two 1-5/8or Coax Support Block 10mm Stainless Steel Hardware Kit for three Coax Support Block 10mm Stainless Steel Hardware Kit for three 1-5/8or Coax Support Block
Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10
1.8 (0.8) 1.9 (0.9) 2.3 (1.0) 2.5 (1.1) 2.8 (1.3) 3.2 (1.5)
Mounting Hardware Kits for Coax Support Blocks and Hanger Clamps

Butterfly Hangers

L-BH-S10-NH L-BH-S12-NH L-BH-S22-NH L-BH-S33-NH L-BH-S42-NH
Standard Hanger Kit for 3/8 corrugated coax Standard Hanger Kit for 1/2 corrugated coax Standard Hanger Kit for 7/8 corrugated coax Standard Hanger Kit for 1-1/4 corrugated coax Standard Hanger Kit for 1-5/8 corrugated coax
Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10
0.8 (0.4) 0.8 (0.4) 1.8 (0.8) 1.1 (0.5) 1.3 (0.6)

Hanger Hardware Kits

These hardware kits allow Butterfly Hangers, Clip Hangers, Standard Hangers and Cushion Hanger Assemblies to be quickly attached to pre-punched holes on support members or mounting accessories. Each kit includes stainless steel bolts, toothed lock washers, and hex nuts in either 3/8 or 10mm sizes.
App. Size Design Feature Mounts to Material Incl. Order Sep. Coax Support 3/8 10mm or Hardware kit for hanger attachment to member --Stainless steel Bolts, nuts, lockwashers Hangers
L-HK-34-10 L-HK-100-10 L-HK-M1020-10
Hanger Hardware Kit, 3/8 3/4 x slotted hex head bolts, lock washers and hex nuts Hanger Hardware Kit, 3/x slotted head bolts, lock washers and hex nuts Hanger Hardware Kit, 10mm x 20mm slotted head bolts, lock washers and hex nuts
Kit of 10 Kit of 10 Kit of 10
0.8 (0.4) 0.8 (0.4) 1.8 (0.8)
Universal Snap-in Hangers
The next-generation Universal Snap-in Hangers incorporate numerous innovative design features which ensure secure, dependable support and simplified installation for your coaxial cable system. The unique internal coax fingers of the Universal Snap-in Hangers securely grip the coax, yet float freely within the hanger to ensure flexibility during installation. The tension and thickness of steel has also been optimized to minimize stiffness and allow easy insertion into a 3/4(19mm) mounting hole. The advanced snap-in fingers of the Universal Snap-in Hangers are specially designed to eliminate inadvertent pop-out. The unique curved finger-tips provide a powerful barrier to pop-out, especially important when encountering side-to-side movement caused by heavy wind loading and other stresses. These curled fingers also offer additional security when faced with excessive galvanizing or rounded edges. The Universal Snap-in Hangers internal ribbing and dog-eared internal fingers provide a firm grip to resist coax slippage. The stainless steel construction of the Universal Snap-in Hangers guarantee exceptional integrity in highly corrosive environments and extreme weather conditions.

Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10 Kit of 10
Wt. lbs (Wt. kg) 50ohms RF Feeder Accessories Connectors Radiating Cable
2.3 (1.0) 2.3 (1.0) 2.3 (1.0) 2.3 (1.0) 2.3 (1.0) 2.3 (1.0) 2.3 (1.0) 2.3 (1.0) 2.3 (1.0) 2.3 (1.0) 2.3 (1.0)
L-CH-A37-1 L-CH-A46-1 L-CH-A52-1 L-CH-A63-1 L-CH-A77-1 L-CH-A85-1 L-CH-A90-1 L-CH-A127-1 L-CH-A150-1 L-CH-A180-1 L-CH-A220-1
Cushion Hanger Assembly w/ 1 Hole for WE37 Cushion Hanger Assembly w/ 1 Hole for WE46 Cushion Hanger Assembly w/ 1 Hole for EW52 and WE61 Cushion Hanger Assembly w/ 1 Hole for EW63 and WE65 Cushion Hanger Assembly w/ 1 Hole for EW77, WE78, E78 Cushion Hanger Assembly w/ 1 Hole for EW85 and WE108 Cushion Hanger Assembly w/ 1 Hole for EW90 Cushion Hanger Assembly w/ 1 Hole for WE130, EW127, E130 Cushion Hanger Assembly w/ 1 Hole for WE150, EW132, E150 Cushion Hanger Assembly w/ 1 Hole for EW180, WE191, E185 Cushion Hanger Assembly w/ 1 Hole for EW220
NOTE: Sizes available for smooth wall coax
55 LG RF Transmission Line
Mounting Accessories for Use on Angle Members

Universal Angle Adaptors

The Universal Angle Adaptors provide a versatile means for securing coaxial cable hangers to solid angle members or to angle members or to angle members where prepunched holes are not easily accessible. Removing a loose, threaded insert quickly converts this unique angle adaptor to accept Snap-In Hangers. This design also accommodates a standard 3/8threaded rod or bolt when mounting Coax Blocks or Butterfly Hangers. The jaw opening allows mounting to up to 7/8(22mm) thick angle members. Typical applications include the mounting of our Mini Coax Support Blocks, Butterfly Hangers, Clip Hangers, or Snap-in Hangers to solid angle members. The Universal Angle Adaptors include 3/8 3/4 x (10mm x 19mm) long stainless steel slotted hex screws and toothed lock washers for hanger attachment. The Universal Angle Adaptors are manufactured from corrosion resistant stainless steel, ensuring long term integrity in extreme weather applications.
App. Size Design Feature Mounts to Material Incl. Order Sep. Lattice towers 3/4 (19mm) holes w/ 3/8 tapped insert Adapts hangers to angle members Accepts snap-in or 3/8 hangers Up to 7/8 (22mm) angle members Stainless steel Adaptors, set bolt, hanger hdwr kit, avail. w/ or without insert Hangers

L-AA-U Universal Angle Adaptor

Kit of 10 Kit of 10

4.9 (2.2) 4.7 (2.1)
L-AA-US Universal Angle Adaptor, Snap-in Version (Insert not included)

Angle Adaptors

Angle Adaptors represent a traditional solution used to securely mount coaxial cable hangers on solid angle tower members. Angle Adaptors directly mount to angle or support members, avoiding costly and time consuming field modifications. The 3/8 10mm tapped holes enable the Angle Adaptor to accommodate any coaxial cable hanger styles that utilize standard 3/8or 10mm hardware, including Butterfly x Hangers, Clip Hangers, and Mini Coax Support Blocks. Angle Adaptors include 3/8 long or 10mm x 10 mm stainless steel slotted hex bolts and toothed lock washers 3/8 for hanger attachment. Angle Adaptors directly mount to angle members up to 7/9 (22mm) thick, and is locked into place with an included square-head set bolt and toothed-jaws, providing a dependable, high-strength mounting solution. The heavyduty design and stainless steel construction of the Angle Adaptors ensure exceptional integrity in highly corrosive environments and extreme weather applications.
App. Size Design Feature Mounts to Material Incl. Order Sep. Lattice towers 3/8 10mm tapped holes or Adapts hangers to angle members High strength solution Up to 7/8 (22mm) angle members Stainless steel Adaptors, set bolt, hanger hdwr kit Hangers

L-AA-SL L-AA-SL-M10

Angle Adaptor w/ 3/8 Tapped Holes Angle Adaptor w/ 10mm Tapped Holes
56 LG RF Transmission Line

4.9 (2.2) 5.4 (2.5)

Aluminum Angle Adaptors
The innovative Aluminum Angle Adaptor provides a cost-effective solution when mounting butterfly and Clip Hangers to angle members by utilizing the mounting slots incorporated into each style of hanger. Once installed on the angle member, the Aluminum Angle Adaptor securely compresses the hanger between the surface of the angle member and the inner wall of the adaptor. This design eliminates costly attachment hardware and simplifies the installation process. The Aluminum Angle Adaptor, designed to accept 8mm metric hardware, provides the flexibility to accommodate different orientations of hanger kits and support members. The jaw opening allows mounting to up to 7/8(22mm) thick angle members and is manufactured from non-corrosive aluminum ensuring long term integrity throughout extreme environmental applications.
App. Size Design Feature Mounts to Material Incl. Order Sep. Lattice towers 8mm tapped holes Adapts hangers to angle members Unique tabs seat in butterfly or clip hangers Up to 7/8 (22mm) angle members Aluminum Adaptors, set bolt Hangers, hanger hardware

L-AA-AM

Aluminum Angle Adaptor, w/8mm Tapped Holes

1.6 (0.7)

57 LG RF Transmission Line
Mounting Accessories for Use on Round Members

Stand-off Adaptors

App. Size Design Feature Mounts to Material Incl. Order Sep. Coax Support 3/4 (19mm) and 7/16 (11mm) holes Three-run cluster bracket Compact mounting solution -Hot dip galv. steel Bracket Hangers, mounting hardware

L-CS-BS

62 LG RF Transmission Line

4.4 (2.0)

Threaded Rod Support Kits
Threaded Rod Support Kits provide a versatile means to support coax and elliptical waveguide hangers in wireless applications. Threaded Rod Support Kits are commonly utilized in waveguide bridge or ceiling mount applications. These kits are also used in conjunction with Angle Adaptors or Stand-off Adaptors to provide an extension for the coax. Each Threaded Rod Support Kit includes stainless steel threaded rod, hex nuts, lock washers, and ceiling mounting bracket.
App. Size Design Feature Mounts to Material Incl. Order Sep. Coax Support 3/8 10mm rod with three lengths or Supports hangers from ceilings or walls Complete mounting kit -Stainless steel Threaded rod, ceiling bracket, hardware Hangers

3/8 Kits

L-TRSK-12-5 L-TRSK-24-5 L-TRSK-36-5 10mm Kits
Threaded Rod Support Kit, 3/x long Threaded Rod Support Kit, 3/x long Threaded Rod Support Kit, 3/x long
Kit of 5 Kit of 5 Kit of 5
2.5 (1.1) 4.0 (1.8) 5.5 (2.5)
L-TR-SK300M10-5 Threaded Rod Support Kit, 10mm x 300mm long L-TR-SK600M10-5 Threaded Rod Support Kit, 10mm x 600mm long L-TR-SK900M10-5 Threaded Rod Support Kit, 10mm x 900mm long

Tie Wraps

Tie Wraps provide temporary support for 1/2 (13mm) and smaller coax jumpers while securing hangers into position. The 15(381mm) Tie Wraps are crafted from nylon and support a maximum bundle of approximately (102mm) in diameter. 4

L-TW-50 Tie Wraps

Kit of 50

0.4 (0.2)

Cable Wraps
L-TW4 L-TW6 L-TW8 L-TW11 L-TW15 L-TW8HD L-TW15HD L-TW24HD L-TW36HD
Cable Tie, 4 long. 7/8 bundle. 18 lb. tensile strength. Cable Tie, 5.7 long. 1-3/8 bundle. 40 lb. tensile strength. Cable Tie, 7.5 long. 1-3/4 bundle. 50 lb. tensile strength. Cable Tie, 11 long. 3 bundle. 50 lb. tensile strength. Cable Tie, 14.5 long. 4 bundle. 50 lb. tensile strength. Heavy Duty Cable Tie, 8 long. 2 bundle. 120 lb. tensile strength. Heavy Duty Cable Tie, 15.2 long. 4-1/4 bundle. 120 lb. tensile strength. Heavy Duty Cable Tie, 24 long. 6-1/4 bundle. 175 lb. tensile strength. Heavy Duty Cable Tie, 36 long. 10-1/4 bundle. 175 lb. tensile strength.
Kit of 100 Kit of 100 Kit of 100 Kit of 100 Kit of 100 Kit of 100 Kit of 100 Kit of 100 Kit of 100
1.0 (0.1) 2.0 (1.0) 3.0 (1.4) 4.0 (1.8) 5.0 (2.3) 6.0 (2.7) 12.0 (5.5) 12.0 (5.5) 18.0 (8.2)

Hoisting Grips

Lace-Up Hoisting Grips
Lace-Up Hoisting Grips provide an effective means for hoisting coax and elliptical waveguide into position and can be utilized to provide additional support once in place. The lace-up design allows the hoisting grip to be attached even when the run has been connectorized and facilitates easy positioning at 200(61m) increments on long coax runs. Lace-Up Hoisting Grips for coaxial cables include a self-locking clip and sealing tape to provide additional support both during and after installation.
App. Size Design Feature Mounts to Material Incl. Order Sep. Coax Support Versions for coax and elliptical waveguide Mesh grip with single eye support Lace-up installation at any point on coax -Tinned bronze Grip, self-locking clip, tape --
L-HG-12 L-HG-16 L-HG-22 L-HG-33 L-HG-42 L-HG-57
Lace-Up Hoisting Grip for 1/2 corrugated coax Lace-Up Hoisting Grip for 5/8 corrugated coax Lace-Up Hoisting Grip for 7/8 corrugated coax Lace-Up Hoisting Grip for 1-1/4 corrugated coax Lace-Up Hoisting Grip for 1-5/8 corrugated coax Lace-Up Hoisting Grip for 2-1/4 corrugated coax
Each Each Each Each Each Each
0.3 (0.1) 0.4 (0.2) 0.6 (0.3) 0.6 (0.3) 1.3 (0.6) 1.3 (0.6)
L-HG-37 L-HG-43 L-HG-52 L-HG-64 L-HG-77 L-HG-85 L-HG-127 L-HG-180

Description`

Lace-Up Hoisting Grip for EW37, WE37, E38 Lace-Up Hoisting Grip for EW43, WE46, ES46 Lace-Up Hoisting Grip for EW52, & WE61 Lace-Up Hoisting Grip for EW63, EW64, WE65, WE70 Lace-Up Hoisting Grip for EW77, WE78, E78 Lace-Up Hoisting Grip for EW85, WE90, WE108, E105 Lace-Up Hoisting Grip for EW122, EW127 EW132, WE122, WE130, WE150, E130, E150 Lace-Up Hoisting Grip for EW180, WE190, WE191, E185
Each Each Each Each Each Each Each
1.3 (0.6) 1.3 (0.6) 1.3 (0.6) 0.6 (0.3) 0.6 (0.3) 0.5 (0.3) 0.4 (0.2)

0.6 (0.3)

65 LG RF Transmission Line

Pre-Laced Hoisting Grips

Pre-Laced Hoisting Grips feature a closed-mesh design which simplifies installation over traditional split, lace-up style grips. The unique design allows the Pre-Laced Hoisting Grip to slip over an unterminated end of coax. The grip securely tightens when pulled, providing an effective means to hoist coax into position and to provide additional support for the coax once in place. Pre-Laced Hoisting Grips for coaxial cables include a self-locking clip and sealing tape to provide additional support both during and after installation.

Antenna Interfaces

1/2 1/2 flex 5/8 7/8 L-CS-A12 L-CS-A12F L-CS-A16 L-CS-A12 L-CS-U1212 L-CS-U1212 L-CS-U1222 L-CS-U1222 Each Each Each Each 0.2(0.1) 0.2(0.1) 0.8(0.4) 0.8(0.4)
* NOTE: Sizes available for smooth wall coax.
68 LG RF Transmission Line

Grounding Kits

Clip-on Ground Kits
The Clip-on Ground Kits are an advanced coax grounding solution, providing the ultimate in ease-of-installation coupled with dependable protection of your coaxial cable system. The unique clip design and pre-formed strap allows the Clip-on Ground Kits to be easily slipped over the outer conductor of the coax and firmly latched into place. The latch mechanism has been optimized to provide a secure fit. maximizing performance by ensuring proper contact surface area and pressure. The innovative design of the Clip-on Ground Kits greatly simplifies installation, minimizing installation time over traditional coiled and bolt-on grounding kits. This design also eliminates the danger of overtightening, reducing the chance of costly errors in the field. The Clip-on Ground Kits are designed to comply with MIL-STD-188-124A, protecting coax from the damaging effects of lightning current in excess of 200kA. Each kit includes a 6gauge 7-strand copper ground lead with your choice of lead lengths and attached or unattached lugs. All buss bar attachment hardware in included, along with required mastic and electrical tape for weatherproofing each kit.
App. Size Design Feature Mounts to Material Incl. Order Sep. Coax Protection 1/2 2-1/4 to coax One-piece style with three lead/lug options Easy-to-install clip design Coax outer conductor Copper strap Ground kit, lug, weatherproofing kit --
L-GK-C12 L-GK-C12-2H2 L-GK-C16 L-GK-C16-2H2 L-GK-C22 L-GK-C22-2H2 L-GK-C33 L-GK-C33-2H2 L-GK-C42 L-GK-C42-2H2 L-GK-C57 L-GK-C57-2H2
Clip-on Ground Kit for 1/2 corrugated coax. Includes 5(1.5m) lead with unattached 3/8 (10mm) two-hole lug.* Clip-on Ground Kit for 1/2 corrugated coax. Includes 2(0.6m) lead with attached 3/8 (10mm) two-hole lug.* Clip-on Ground Kit for 5/8 corrugated coax. Includes 5(1.5m) lead with unattached 3/8 (10mm) two-hole lug.* corrugated coax.Includes 2(0.6m) lead Clip-on Ground Kit for 5/8 with attached 3/8 (10mm) two-hole lug.* corrugated coax. Includes 5(1.5m) lead Clip-on Ground Kit for 7/8 with unattached3/8 (10mm) two-hole lug.* corrugated coax. Includes 2(0.6m) lead Clip-on Ground Kit for 7/8 with attached 3/8 (10mm) two-hole lug.* corrugated coax. Includes 5(1.5m) lead Clip-on Ground Kit for 1-1/4 with unattached 3/8 (10mm) two-hole lug.* Clip-on Ground Kit for 1-1/4 corrugated coax. Includes 2(0.6m) lead with attached 3/8 (10mm) two-hole lug.* corrugated coax. Includes 5(1.5m) lead Clip-on Ground Kit for 1-5/8 with unattached 3/8 (10mm) two-hole lug.* corrugated coax. Includes 2(0.6m) lead Clip-on Ground Kit for 1-5/8 with attached 3/8 (10mm) two-hole lug.* corrugated coax. Includes 5(1.5m) lead Clip-on Ground Kit for 2-1/4 with unattached 3/8 (10mm) two-hole lug.* Clip-on Ground Kit for 2-1/4 corrugated coax. Includes 2(0.6m) lead with attached 3/8 (10mm) two-hole lug.*

Wt. lbs (Wt. kg) 3.0 (1.4) 3.3 (1.5) 5.3 (2.4)

Cushions and Boots

4"(102mm) Boot Assembly Kits
These innovative Boot Assembly Kits feature a boot assembly and standard cushion insert in one convenient package. The unique boot assembly features a split, one-piece design which dramatically reduces installation time and difficulty. Boot Assembly Kits are designed to be fitted onto EP-series entry panels in wall/roof feed-thru applications.
App. Size Design Feature Mounts to Material Incl. Order Sep. Entry Solutions Versions for coax and elliptical waveguide Compression boot kit for aluminum entry panels One-piece design simplifies installation 4 (102mm) Entry Panels EPDM rubber Boot, cushion, two hose clamps 4 (102mm) Entry Panel
80 LG RF Transmission Line
L-BA-37-1A L-BA-46-1A L-BA-52-1A L-BA-63-1A L-BA-77-1A L-BA-85-1A L-BA-90-1A L-BA-127-1A L-BA-150-1A L-BA-180-1A L-BA-2201A Bare Copper
Boot Assembly Kit, 4 (102mm) w/ 1 Hole for WE37 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for WE46 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for EW52 and WE61 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for EW63 and WE65 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for EW77, WE78, E78 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for EW85 and WE198 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for EW90 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for EW127, WE 130 and WE130 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for WE150, EW 132, E150 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for EW180, WE191, E185 Boot Assembly Kit, 4 (102mm) w/ 1 Hole for EW220
Each Each Each Each Each Each Each Each Each Each Each 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7)
L-BA-10-1A L-BA-10-3A L-BA-10-9A L-BA-RG213-6A L-BA-RG8-6A L-BA-12-1A L-BA-12-2A L-BA-12-3A L-BA-12-4A L-BA-12-5A L-BA-12F-1A L-BA-12F-2A L-BA-12F-3A L-BA-12F-4A L-BA-16-1A L-BA-16-2A L-BA-16-3A L-BA-16-4A L-BA-22-1A L-BA-22-2A L-BA-22-3A L-BA-22-4A L-BA-33-1A L-BA-42-1A L-BA-57-1A
Boot Assembly Kit, 4 (102mm) w/ 1 Hole for 3/8 corrugated coax (102mm) w/ 3 Holes for 3/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 9 Holes for 3/8 corrugated coax Boot Assembly Kit, 4 Boot Assembly Kit, 4 (102mm) w/ 6 Holes for RG11, RG213, RG214, 9913, LMR-400 Boot Assembly Kit, 4 (102mm) w/ 6 Holes for RG8 coax (102mm) w/ 1 Hole for 1/2 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 2 Holes for 1/2 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 3 Holes for 1/2 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 4 Holes for 1/2 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 5 Holes for 1/2 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 1 Hole for 1/2 coax flex Boot Assembly Kit, 4 (102mm) w/ 2 Holes for 1/2 coax flex Boot Assembly Kit, 4 (102mm) w/ 3 Holes for 1/2 coax flex Boot Assembly Kit, 4 (102mm) w/ 4 Holes for 1/2 coax flex Boot Assembly Kit, 4 (102mm) w/ 1 Hole for 5/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 2 Holes for 5/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 3 Holes for 5/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 4 Holes for 5/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 1 Hole for 7/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 2 Holes for 7/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 3 Holes for 7/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 4 Holes for 7/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 1 Hole for 1-1/4 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 1 Hole for 1-5/8 corrugated coax Boot Assembly Kit, 4 (102mm) w/ 1 Hole for 2-1/4 corrugated coax Boot Assembly Kit, 4

Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7) 1.6 (0.7)
NOTE: Also available for smooth wall coax. All Boot Assembly Kits available in 5.
81 LG RF Transmission Line
Feed-thru Boot Assemblies
These innovative Boot Assemblies feature a one-piece design which dramatically reduces installation time and difficulty. The split, one-piece style simplifies clamping and frees the installers' hands to position the coax runs. Boot Assemblies are designed to be fitted onto EP-series entry panels in wall/roof feed-thru applications. The durable boot is designed to meet ASTM-D2000 and ASE J200 specifications. Each Boot Assembly includes the boot and two round-member adaptor clamps. SC-series cushion inserts, which fit inside the Boot Assembly to hold the coax in place, are ordered separately to accommodate specific application requirements. Boot Assembly Kits are also available, which include a feed-thru boot assembly and standard port cushion in one convenient package. See chart on previous page.
App. Size Design Feature Mounts to Material Incl. Order Sep. Entry Solutions 4 (102mm) and 5 (127mm) Compression boot for aluminum entry panels One-piece design simplifies installation Entry panels EPDM rubber Boot, two hose clamps Cushion inserts, Entry Panel

L-BA-400 L-BA-500

4 (102mm) Boot Assembly, cushion not included * 5 (127mm) Boot Assembly, cushion not included *

Kit Qty. Each Each

Wt. lbs (Wt. kg) 1.3 (0.6) 1.6 (0.7)
*NOTE: SC-Series Cushion configuration available upon request.
82 LG RF Transmission Line
Cushion Plugs seal unused holes in cushion inserts or boot assemblies, providing environmental protection and reserving space for the addition of future coax runs.
App. Size Design Feature Mounts to Material Incl. Order Sep. Entry Solutions 1/2 1-5/8 to coax Plugs for unused cushion holes Allows for future expansion Cushion Inserts EPDM rubber Plugs Cushion Inserts or Boot Assemblies
L-CP-12 L-CP-10 L-CP-16 L-CP-22 L-CP-33 L-CP-42
Cushion Plug for 1/2 corrugated coax Cushion Plug for 3/8 corrugated coax corrugated coax Cushion Plug for 5/8 Cushion Plug for 7/8 corrugated coax Cushion Plug for 1-1/4 corrugated coax corrugated coax Cushion Plug for 1-5/8
KIt of 5 KIt of 5 KIt of 5 KIt of 5 KIt of 5 KIt of 5 0.1 (0.1) 0.2 (0.1) 0.1 (0.1) 0.2 (0.1) 0.4 (0.2) 0.7 (0.3)
83 LG RF Transmission Line

Cushion Plugs

19~20F ASEM Tower,159 Samsung-dong, Gangnam-gu, Seoul,135-090, Korea Tel : 82-2- 2189-9325~7 Fax : 82-2- 2189-9339 http : //www.lgcable4u.com http : //www.lgcable.co.kr

ProSelect

ProSelect Series

I N T E R FAC E B OX E S

Interface Boxes HCS3000R Headend Controller for HCS1200T Factory options for Up-Stream Frequency Supports MPI Control LST-4100A PPV Interface Module
PROSELECT SERIES INTERFACE BOX LST-5600A
Supports MPI Control LST-5600A PPV Interface Box ATSC/NTSC Tuner Supports MPI Control Interface Cards PCZ3100 Multi-Sync Computer Display Card Operates VGA, SVGA, XVGA and up to 2048 x 2048 @ 100 Hz. Compatible with 48 Series only 15-Ft. Mirror Cable Included HCS1 100T RS-232C Interface Card Supports MPI Commands For use with select commercial models HCS1200T Control and Monitoring Card

Interface Boxes

PRODUCT/FEATURES Product Usage Remote Television Control HCS3000R Headend Controller for HCS1200T Control the power, monitor communications status, adjust volume settings and change channels all from the remote computer control Status of each television can be monitored, providing information to verify that television is on-line and operating in compliance with the customers requirements All MPI Enabled TVs LST-4100A Pay-Per-View Interface Module Control power on/off, input sources, adjust volume settings and change channels directly or through MPI Status of each television can be monitored, providing information to verify that television is on-line and operating in compliance with the customers requirements Select Plasma, CRT and LCD LST-5600A Pay-Per-View Interface Box with Integrated HD Tuner Control power on/off, input sources, adjust volume settings and change channels directly or through MPI Status of each television can be monitored, providing information to verify that television is on-line and operating in compliance with the customers requirements Plasma and LCD TVs w/RS-232
Remote Television Monitoring

Compatible TV

TECHNICAL SPECIFICATIONS Product Dimensions (DxWxH) 5" x 19" x 1.75" Weight 5 Lbs. Connector (MPI) Standard 9-Pin RS-232C Serial Interface Transmitter Frequencies 434 MHz Receiver Frequency 20 MHz, 25 MHz or 32 MHz (factory option) Able to Address Up To 32,768 Televisions Computer Requirements Control Software and Standard Serial (RS-232) Interface Source Selection Power On, Power Off, Volume Command Set Up, Volume Down, Set Max Volume, Set Minimum Volume Request TV Status
7.375" x 10.750" x 1.750" 2.7 Lbs. Standard RJ-1 1
1 1.54" x 14.17" x 2.6" 6.8 Lbs. Standard RJ-1 1
Serial Interface via RF Cable Supports MPI Commands HCS1301T Protocol Conversion Card RS-232 Communication Supports MPI Commands
1-Display Control Software and Standard Serial (RS-232) Interface Any valid input source Digital MPI Power On, Power Off, Volume Up, Volume Down, Set Max Volume, Set Minimum Volume Signal Strength, Power Status, Signal Strength, Power Status, TV Volume Level, Channel TV Volume Level, Channel Number Number
1-Display Control Software and Standard Serial (RS-232) Interface Any valid input source Digital MP I Power On, Power Off, Volume Up, Volume Down, Set Max Volume, Set Minimum Volume Signal Strength, Power Status, TV Volume Level, Channel Number

HCS1040T Power Converter Card Standard RJ-1 1
I N T E R FAC E C A R D S
PROSELECT SERIES INTERFACE CARD HCS-1040T

Interface Cards

PRODUCT/FEATURES
Product Usage Remote Television Control
PCZ3100 Multi-Sync Computer Display Card
HCS1100T Cadet RS-232 Interface Card Power and convenience of an industry standard interface with the flexibility and control of an MPI
HCS1200T Lieutenant Control and Status Monitoring Card Control the power, monitor communications status, adjust volume settings and change channels all from the remote computer control Status of each television can be monitored, providing information to verify that television is on-line and operating in compliance with the customers requirements All MPI Enabled TVs

Only 48 Series TVs

Status of each television can be monitored, providing information to verify that television is on-line and operating in compliance with the customers requirements All MPI Enabled TVs
HCS1301T General Protocol Conversion Card Control the power, monitor communications status, select input sources, adjust volume settings and change channels all from remote computer control Status of each television can be monitored, providing information to verify that television is on-line and operating in compliance with the customers requirements All MPI Enabled TVs
HCS1040T Power Converter Card Converts hospital RF and low voltage AC power into RF signal output and 12V DC output to operate the L10V34H, L10V34S TVs

L10V34H, L10V34S

TECHNICAL SPECIFICATIONS
Product Dimensions (DxWxH) 6" x 1.1" x 3.75" Weight Connector (MPI) Transmitter Frequencies Receiver Frequency Able to Address Up To Computer Requirements
.25 Lbs. Standard 15-Pin D-Sub In/Out
6" x 1.1" x 3.75".22 Lbs. Standard 9-Pin RS-232C Serial Interface

Source Selection

Command Set

Request TV Status

1 Television 1 Television Supports Computer Output VGA, SVGA, XVGA and up to 2048 x 2048 @ 100 Hz and Apple and other IMAC Products Any valid input source, including FM stations on FM tuner equipped sets, can be selected Image Freeze Control, Zoom, Complete set of MPI Pan and Auto Size commands is supported with no limitations Signal Strength, Power Status, TV Volume Level, Channel Number
6" x 1.1" x 3.75".20 Lbs. Standard 9-Pin RS-232C Serial Interface 20 MHz, 25 MHz or 32 MHz (factory option) 434 MHz 32,768 Televisions Control Software and Standard Serial (RS-232) Interface

6" x 1.1" x 3.75".22 Lbs. Standard RJ-1 1
1 Television Control Software and Standard Serial (RS-232) Interface

1 Television

Any valid input source, including FM stations on FM tuner equipped sets, can be selected Power On, Power Off, Volume Up, Volume Down, Set Max Volume, Set Minimum Volume Signal Strength, Power Status, TV Volume Level, Channel Number

www.LGcommercial.com

LG Electronics U.S.A., Inc. 2000 Millbrook Drive, Lincolnshire, IL 60069 Customer Service: 1-888-865-3026 Dimensions and weights are approximate. Design and specifications subject to change without notice. The LG Lifes Good is a registered trademark of LG Electronics U.S.A., Inc. 2005 LG Electronics U.S.A., Inc. Printed in the USA. LGProSelect0305