Reviews & Opinions
Independent and trusted. Read before buy LG RZ-50PY10!

LG RZ-50PY10

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
LG RZ-50PY10, size: 6.6 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

LG RZ-50PY10About LG RZ-50PY10
Here you can find all about LG RZ-50PY10 like manual and other informations. For example: review.

LG RZ-50PY10 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a LG RZ-50PY10 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your LG RZ-50PY10 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc1

website:http://biz.LGservice.com e-mail:http://www.LGEservice.com/techsup.html

COLOR TV SERVICE MANUAL

CHASSIS : MC-049B

MODEL:RZ-21FB35MX/RX

CAUTION
BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

CONTENTS

Contents....2 Safety Precautions....3 Control Descriptions...4 Specifications....7 Adjustment Instructions...8 T rouble Shooting....12 Printed circuit board....16 Block Diagram....18 Exploded View....20 Exploded View Parts List...21 Replacement Parts List...22 SVC. Sheet....

SAFETY PRECAUTIONS

IMPORT ANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance

An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation. If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified. When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB. Keep wires away from high voltage or high temperature parts. Due to high vacuum and large surface area of picture tube, extreme care should be used in handling the Picture Tube. Do not lift the Picture tube by it's Neck.
Before returning the receiver to the customer,
always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1M and 5.2M. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer.
Leakage Current Hot Check (See below Figure)
Plug the AC cord directly into the AC outlet. Do not use a line Isolation Transformer during this check. Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5mA. In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.

X-RAY Radiation

Warning:
The source of X-RAY RADIATION in this TV receiver is the High Voltage Section and the Picture Tube. For continued X-RAY RADIATION protection, the replacement tube must be the same type tube as specified in the Replacement Parts List.
To determine the presence of high voltage, use an accurate high impedance HV meter. Adjust brightness, color, contrast controls to minimum. Measure the high voltage. The meter reading should indicate 23.5 1.5KV: 14-19 inch, 26 1.5KV: 19-21 inch, 29.0 1.5KV: 25-29 inch, 30.0 1.5KV: 32 inch If the meter indication is out of tolerance, immediate service and correction is required to prevent the possibility of premature component failure.

Leakage Current Hot Check circuit

AC Volt-meter

To Instrument's exposed METALLIC PARTS
Good Earth Ground such as WATER PIPE, CONDUIT etc.

0.15uF

1.5 Kohm/10W

DESCRIPTION OF CONTROLS

All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set.

POWER MUTE

SOUND PICTURE

TV/AV MENU

Remote control handset
Before you use the remote control handset, please install the batteries. See the next page.
1. POWER switches the set on from standby or off to standby. 2. NUMBER BUTTONS switches the set on from standby or directly select a number. 3. MENU selects a menu. 4. EYE/ (option) switches the eye function on or off.

T U R B O

VOL PR

P/STILL

SSM SLEEP

PSM PIP

FAVOURITE Q.VIEW
5. D / E (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. scans programmes automatically. F / G (Volume Up/Down) adjusts the volume. adjusts menu settings. OK accepts your selection or displays the current mode. 6. Q.VIEW returns to the previously viewed programme. 7. TELETEXT BUTTONS (option) These buttons are used for teletext. For further details, see the Teletext section.

SIZE PR

STILL PR

POSITION SWAP

9/4PIP INPUT
(Without TELETEXT / With PIP)
8. PSM (Picture Status Memory) recalls your preferred picture setting. 9. FAVOURITE selects a favorite programme. 10. TURBO PICTURE / SOUND BUTTON (option) selects Turbo picture and sound. 11. MUTE switches the sound on or off. 12. TV/AV selects TV or AV mode. switches the set on from standby.

PSM PIP TEXT/

MIX SIZE PR TIME STILL PR
REVEAL ? MODE M POSITION 9/4PIP i

(With TELETEXT / PIP)

13. I/II/ (option) selects the language during dual language broadcast. (option) selects the sound output.
14. LIST displays the programme table. 15. SLEEP sets the sleep timer. 16. SSM/ (option) (Sound Status Memory) recalls your preferred sound setting.

MENU/INDEX

17. SURROUND (/ ) (option) selects surround sound.
18. VCR BUTTONS control a LG video cassette recorder. 19. PIP BUTTONS (option) PIP switches the sub picture on or off. PR +/selects a programme for the sub picture. SWAP alternates between main and sub picture. INPUT selects the input mode for the sub picture. SIZE adjusts the sub picture size. STILL freezes motion of the sub picture. POSITION relocates the sub picture in clockwise direction. 9/4 PIP

PR OK PR

I / II /

PSM SLEEP

FAVOURITE

PICTURE SOUND

TURBO/
switches on or off the 9 or 4 sub pictures.

COLOURED BUTTONS : These buttons are used for teletext (only TELETEXT models) or programme edit.

: No function

(Without TELETEXT / PIP)

Q.VIE W

TEXT/MIX/
UPDATE/ X TIME/ REVEAL/ ?

PSM SSM/ SLEEP/ M

FAVOURITE PICTURE
(With TELETEXT / Without PIP)

Front panel

RZ-21FA35 series
1. MAIN POWER (ON/OFF) switches the set on or off.

MENU OK ON/OFF VOL PR

L/MONO

RZ-21FB25 series

MENU VOL PR
2. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby mode. dims when the set is switched on. 3. REMOTE CONTROL SENSOR 4. MENU selects a menu.

R L/MONO AUDIO

ON/OFF

3 RZ-15/21FB55/56 series

MENU OK VOL PR

VIDEO L AUDIO R

RZ-17/21FB75 series
5. OK accepts your selection or displays the current mode. F / G (Volume Up/Down) adjusts the volume. adjusts menu settings. D / E (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. 6. AUDIO/VIDEO IN SOCKETS (AV2) (option) Connect the audio/video out sockets of external equipment to these sockets.

RZ-21FC45 series 7

R AUDIO
7. HEADPHONE SOCKET (option) Connect the headphone plug to this socket. 8. EYE (option) adjusts picture according to the surrounding conditions.

1 RZ-21FB35 series

VIDEO L/MONO AUDIO R

9. TV/AV (option)

selects TV or AV mode. clears the menu from the screen. switches the set on from standby.

L/MONO VIDEO

MENU OK

AV VIDEO AUDIO

(Function) (option) selects volume, EYE (option), picture items or brief auto programme while the menus not display.

RZ-15/21FB95 series 7

11. + / - (D / E) (option) adjusts the function or selects a programme. switches the set on from standby. 12. TURBO SOUND / PICTURE (option)

CZ-21Q65/66 series

(VOL) ( ) PR ( )

L/MONO AUDIO R

switches Turbo sound or Turbo picture function on or off.
Note : a. Do not place any heavy objects (over 4Kg) on the RZ-21FA35 series models. b. Shown is a simplified representation of front or side panel. Here shown may be somewhat different from your set.

SPECIFICA TIONS

Note : Specification and others are subject to change without notice for improvement.

F Scope

This specification can be applied to all the television related to MC-049B Chassis.

F Requirement for Test

Testing for standard of each par must be followed in below condition
F Test and Inspection Method
1) Capacity : Follow LG electronics TV testing Standard. 2) Another Required Standard - EMI : Following CE Standard (EN55020, EN55013) - Safety : Following CB Standard (EN55013)
1) Temperature : 20 5C (CST must be tested 40 5C. Humidity : 50%) 2) Relative Humidity : 65 10% 3) Power : Standard input Voltage (110~240V, 50/60Hz) 4) Measurement must be performed after heat-run more than 20min. 5) Adjusting Standard for this chassis is followed a special standard.

F General Specification

No 1 Item Receiving System Specification 1) PAL/SECAM BG 2) PAL/SECAM DK 3) PAL I/I 4) NTSC M 5) SECAM-L/L 6) NTSC 4.43(AV) 2 Receiving Channel 1) VHF : E2 ~ E12 UHF : E21 ~ E69 CATV : S1 ~ S20 HYPER : S21 ~ S41 2) L/L : B,C,D 3) VHF : 02 ~ 13 UHF : 14~ 69 CATV : 02 ~ Input Voltage 110-240V~, 50/60Hz 240V~, 50Hz Market Screen Size Tuning System Operating Environment EU,CIS, China, Asia, Africa 14 ~ 21 FVS 100Program 1) Temp. : 0 ~ 45 deg 2) Humidity: 85% under 8 Storage Environment 1) Temp. : -20 ~ 60 deg 2) Humidity: 85% under 200 PR. (OPTION) FLAT / CONVENTIONAL Non EU EU NTSC-M (Multi - model) For EU/ For Non EU Remark For EU/ For Non EU

ADJUSTMENT INSTRUCTIONS

1. Application Object
These instructions are applied to all of the color TV, MC-049B. CPT Assembling
4. Purity & Convergence adjustment
As preparatory operations before assembling CPT, wind cotton Tape for protecting to CPT NECK and DY, CPT connection parts. At this moment, end of tape should be over-lapped and wound in direct route to the NECK. Fix the Magnet to the position as shown picture below. Be careful not to make CPT neck shadow while adjusting DY.
Convergence Magnet 6Pole 4 2

2. Notes

(1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order.But the adjustment can be changed by consideration of mass production. (3) The adjustment must be performed in the circumstance of 255C of temperature and 6510% of relative humidity if there is no specific designation. (4) The input AC voltage of the receiver must keep rating voltage in adjusting. (5) The receiver must be operated for about 15 minutes prior to the adjustment.
Assembling DY to CPT HEAT RUN Degaussing STC Adjustment

PURITY Adjustment

15 ~ 20mm

3. Focus adjustment

3.1. Preliminary steps

Tune the TV set to receive a digital pattern. (SVC mode:Automatically mode change the STANDARD MODE)
DY Fixing SCREEN Voltage adj. W/B Fixing FOCUS not yet ADJ. STC not yet ADJ. DYC not yet ADJ.
Let the screen Standard condition. Operate Heat-Run at least 15 minutes. Torque is to be 9-11 kg f.cm when fixing DY.
4.1. Color purity adjustment
(1) It makes CPT enough to demagnetization. (2) Receive the signal of red raster. (3) Loosen fixed screw of DY and closely to CPT funnel part. (4) Check the center of screen that PURITY MAGNET of CPT by crossing adjustment. At this time, 4 & 6 pole magnet is located to magnet of nothing. (5) Move the DY to make equal red on whole screen and it does not to make the DY by fixed screw after check a simple color of Red/Green/Blue and white raster whether or not it is a pollution of color. (At this time, take care raster of screen and DY must fixing in the condition which maintains a horizontality.) (6) Check the receiver by move direction. When adjustment is not working, adjust with the assisted MAGNET.
<Fig 1. PAL Digital Pattern(EU05CH)>

3.2. Adjustment Method

1) Single Focus CPT Adjust the upper Focus volume of FBT for the best focus of horizontal line A,vertical line B.
4.2. Convergence adjustment
These adjustments can the best condition of focus after finished purity adjustment. (1) Receive the signal of CROSS HATCH that BACK RASTER is black. (2) Adjust brightness and luminosity till dot appear 9 ~12. (3) Open angle of the two tab of 4 pole MAGNET by isogonic angle and accord with vertical line of red and blue color in the middle of screen.
(4) Maintain as angle of (3) and rotate the tab to accord with vertical line of Red and Blue color in the middle of screen. (5) Open angle of the two tab of 6 pole magnet by isogonic angle and accord with vertical line of Red/Blue and Green. (6) Maintain as angle of (5) and rotate the tab to accord with horizontal line. In case of twisted horizontal line,repeat adjustment of (3) ~ (5) remembering the movement of Red/Green/Blue color. (7) Move the DY to best condition of convergence and attach the CPT to a rubber-chock for fixed DY.
2. White balance IIC Parameter
Program Vcd Slave TWBeng_v049 BCF0 R_Amp Program Sub Add Start Bit Stop Bit Program Eprom_Slave R_Cut TWBeng_v049 AE B_Amp Speed 1 Delay 30 B_Cut
TWBeng_v049 TWBeng_v049 TWBeng_v049 TWBeng_v049 1C1 1C1 8A8B 1 1CA 1C1 8E8F 1
5. Screen voltage adjustment

7.2 Adjustment

(1) VL(Vertical Linearity) adjustment: Adjust the top & bottom size of inner circle to be equal. (2) VA (Vertical Amplitude) adjustment: Adjust so that the circle of a digital circle pattern should be located interval of 6~7mm from the effective screen of the CPT. (3) SC (S correction) adjustment: Adjust so that all distance between each lattice width of top/center/bottom are to be the same. * Setting the CPT Default(Initial data) value like that, because it is decide by CPT DY value

* Auto adjustment

<Table 3> White Balance Initial Data 1. IC
Name VCD IC EP_ROM VCT49xyi 24C16 Maker Micronas ST, ATMEL 0 A 0 Algorithm
(4) VS (Vertical Shift) adjustment: Adjust so that the geometric vertical center line is in accord with vertical center line of CPT. (5) HS(Horizontal Shift) adjustment: Adjust so that the geometric horizontal center line is in accord with horizontal center line of CPT. <Table 4> Initial deflection setting data Menu VS VA VL SC HS N50Hz(PAL) Variable range FLAT 21 -512~511 -512~511 -512~511 -512~511 32~-N60Hz(NTSC) FLAT -6 123

8-4. OPTION2 Function

Option AV2 Code DVD SCART1 GAME EYE TX KEY DEGAU Without A/V2 With AV2 Without DVD With DVD Without SCART1 With SCART1 Without GAME function With GAME function Without EYE With EYE LARGE SMALL 6,8 KEY 4 KEY Without DEGAU Whit DEGAU Function

8.OPTION Adjustment

8-1. Preparation for Adjustment
1) This option adjustment decides function in accordance with model. Press IN-START button on SVC communicator, then adjust the option at OPTION1 mode. 2) Mark the option adjustment data like [111,111,111,111] in BOM.

8-5. OPTION3 Function

Option TEXT Code TOP ACMS Function Without TEXT (200PR) With TEXT (100PR) FLOP TOP Without ACMS With ACMS Without I 2 SV With I 2 SV VOL 0 VOL 1 Without TURBO SEARCH With TURBO SEARCH Without TURBO PICTURE/ SOUND With TURBO PICTURE/ SOUND Without HDEV With HDEV

8-2. Adjustment Method

OPTION data input 1) Function : YES, No function : NO 2) Select each OPTION function by the CH Up/Down button and then set up each OPTION(yes or no) by the VOL Up/Down button.

8-3. OPTION 1

Option INCH Code SYS SOUND CH+AU 21A 21B 21C 29F/25F 28WF/32WF 28N 34F 29N/25N BG/I/DK BG/I/DK/L BG/I/DK/M BG/L RF STEREO AV STEREO MONO MONO DUAL Using Not using Function

I 2 SV

- 10 -

8-6. OPTION4 Function

Option OSD L Code 10 TXT L HOTEL MAX V 0~ 100 ENG ONLY EU-5EA EU ETC GREECE EU-ALL FARSI ARAB URDU E+HINDI E+I+M+V E+THAI E+CHINA WEST EU EAST EU1 TURKEY EU EAST EU2 CYRILLIC1 CYRILLIC2 CYRILLIC3 TURK GRE1 TURK GRE2 TURK GRE3 ARAB FRA ARAB ENG ARAB HEB1 ARAB HEB2 FARS ENG FARS FA FARS ALL AUTO WITHOUT HDEV WITH HDEV SETTING VOL MAX Function

- 11 -

TROUBLE SHOOTING

RF- STEREO

PICTURE O. K / NO SOUND
Selec t ed c o rrec t syst em In m enu OK Chec k t he wavef o rm IF 1 o f TU101 OK Chec k t he wavef o rm At p in 4, 5 o f IC11 OK Chec k t he wavef o rm At p in 2, 4 o f IC601 OK Chec k t he wavef o rm At p in 6 o f ICOK Chec k t he wavef o rm At p in 8, 9, 1 1, 12 o f IC601 OK Chec k t he wavef o rm At p in 5, 6 o f IC601 NO Chec k / Rep lac e F80 6, D8 28( D805) NO Chec k / Rep lac e QNO NO Chec k The Vo lt ag e At p in 2, 19 , 20, 2 1, 24 o f IIC11 Chec k The vo lt ag e At p in o f IC82 1, IC8 22, Q807 NO Chec k / Rep la c e C821, IC822, QNO Chec k / Rep lac e TU 101
No Rast er / So und OK ( 1/ 2)
Chec k t he Heat er vo lt ag e o f CPT ( 6 ~ 6. 4 Vrm s)
Chec k HV, Sc reen Vo lt ag e o f CPT
Chec k R, G, B o ut o f CPT Bo ard
Chec k t he Heat er p ulse o f FBT T402

Chec k FBT T4 02

Chec k 185V line o f CPT Bo ard & if no p ro b lem c hec k and Rep lac e

Chec k IC901 , P903 A

Chec k RF901 , PP4 02B, FR401

Chec k FBT T402

- 12 -

No Ras ter ( 2/ 2)

CHECK B+ At D829 c at ho d e

No rm al Ab no rm al

Is t he vo lt ag e a t eac h p in vo lag e o f IC11

Chec k Fuse o f AC line

NO Chec k & Rep lac e IC11 NO Chec k & Rep lac e QNO Chec k & Rep lac e TNO Chec k & Rep lac e Q40 1
Chec k p in 60 Of IC1 1( H - Out )
Chec k t he In/ o ut o f reg ulat o r ( IC8 21, IC822 IC82 3, IC824 IC82 5)

Chec k / Rep lac e Fuse

Chec k t he Vo lta g e Of C803
Chec k QCo llec to r wavef o rm

Chec k / Rep lac e DB801

Chec k t he Vo lta g e Pin 4 OF IC801
Chec k T401 & eac h p in vo lta g e

18~20V

Chec k / Rep lac e Fuse IC8 01
Chec k / Rep lac e IC8 01, IC802 , IC826
Chec k Fuse and Dio d e o f sec o nd ary Lo ad o f SMPS t rans( T803)
Chec k & Rep lac e T402

Chec k / Rep lac e IC1 1

- 13 -

NO Pic t ure / No So und

Is Any OSD d isp la yed ?

OK OK OK

Chec k IC11 p in71, 7 2, 73 ( R, G, B o ut )
Chec k rec eiving syst em in MENU & exec ut e Aut o - Pro g ram.
Do es t he auto - Pro g ra m Op erat e p ro p erly
Sto re o n m anual- p ro g ram MENU
Chec k p in40( V o ut 1) 1 Vp - p
Chec k 1. 8V , 3. 3 V, 5 V DC Vo ltag e
Chec k SMPS Trans Sec o nd ary Vo ltag e
Go t o No So und / Pic t ure OK
Chec k p in18 Reset Vo lta g e

3.3 V DC NO OK

Chec k IC13 ( Reset IC)
Chec k p in57, 58 SCL, SDA

3.3 V DC OK

Chec k IC12 ( EEPROM) & SCL , SDA Line

Relac e IC11

Q501 , Q5 03, Q( R, G, B o ut o f IC11)
Chec k / Rep la c e CPT Bo ard c o m p o nent

- 14 -

AV STERRO / MONO MODEL
Selec t c o rrec t syst em In m enu
Chec k t he c o nnec t io n Of AV eq uip m ent AV Chec k t he wavef o rm At p in16, 17 o f IC11

OK OK NO NO

Chec k TUTuner
Chec k t he wavef o rm At p in4 , 5 o f IC11
Chec k t he vo lt ag e Of p in2 , 19, 20, 21, o f IC11
Chec k t he wavef o rm At p in2 , 4 o f IC601
Chec k t he sig na l line o f SPK- L, R
Chec k t he wavef o rm At p in6 o f IC601
Chec k p in 55 ( m ut e) o f IC11
Chec k t he wavef o rm At p in8 , 9, 11, 12 o f IC6 01
Chec k t hevp lta g e At p in7 , 5 o f IC601
Chec k/ Rep lac e D828, D805, F8 06
Chec k t he c o nnec t io n o f NO sid e o r Fro nt AV Bo a rd P603A

Co rrec t t he Bo ard

Rep la c e IC601

- 15 -

PRINTED CIRCUIT BOARD

- 17 -

RGB PIP_BOARD ( SDA9489X ) ST-5V 190 V ST-5V KIA78S06P ( IC824) 12V S111- ( IC853) S1117 -18 ( IC825) 6. 5 V 3. 3 V 5V KA78R05C S-Vc c 35V( H-Vc c/ TU-33V) AV-IN B+ 14V VA VB H-FLB FBT ( T402) H-Vc c H-OUT H-DRIVE ( Q401 ) SCREEN H/ T 190V -14V HV VERTICAL AMP ( IC301) TDA4863A Y/Cb/Cr-IN SCART RGB-IN KA78R33 GAME HIC ( HIC01)

AUDIO AMP ( IC601)

RGB AMP ( TDA6107Q )

ON / OFF

IIC RESET H-FLB 5V ST-3. 3V

VIDEO/AUDIO

DATA/CLOCK

PIP-VIDEO

PIP-RGB

S-Vc c ST-1. 8V

AUDIO-OUT

MICOM( IC 11 )

VCT49* *

STR -W6754 ( IC801)

BLOCK DIAGRAM

- 18 TV / MONITOR OUT

33V 5V

SAW FILTER ( Z101)

TUNER ( TU101)
AV-OUT ( JK202) * SCART/ PHONE/ DVD

- 19 -

EXPLODED VIEW

330 320

121 120

- 20 -

EXPLODED VIEW PARTS LIST
LOCA. No. PART No. 343-B40C 6335V21017A 6400GESS01A 4810V00617A 150-D02X 170-A01N 174-009E 3091V00B13C 3091V00B13D 520 5020V00684B 320-062D 5020V00685B 3809V00A66B 6871VMM794B 6871VMM794P 6871VMM796D 6871VMM796X 6871VMM863A 6871VMM863B 6871VMM863D 6871VMM863E 6871VMM863L 6871VMM863M 332-057J 1PTF0403116
The components identified by mark critical for safety. Replace only with part number specified.
DESCRIPTIONS SUPPORTER, PCB HIPS 40AF RN-21FB30 CPT ASSEMBLY A51QDX993X005 N(+0.40G) 0G SDIH FLAT(MST,ITC),ZH 36 SPEAKER,FULLRANGE C070P01K1450 ESTEC 8OHM 10/20W 83DB 70 BRACKET, SPEAKER RT-21FB30 ABS,HF-380 COIL,DEGAUSSING CU 21 60TURN 12 OHM D02N (NYLON) CPT EARTH, 21 64T 2LUG 1P HSG CL-21Q20ET(PC-99DA) POWER CORD, POWER(W/HOLD,HOUSING,L=200,4.0 CABINET ASSEMBLY, RZ-21FB35MX MONO E_PHONE MC049B LGEMA LOCAL CABINET ASSEMBLY, RZ-21FB35RX STEREO E_PHONE MC049B LGEMA LOCAL BUTTON, CONTROL RZ-21FB35MX ABS, HF-380 6KEY LGEMA 117A SPRING, KNOB BUTTON, POWER RZ-21FB35MX ABS, HF-380 1KEY LGEMA 117A BACK COVER ASSEMBLY, RZ-21FB35MX 1PHONE LGEMA MC049B PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35MX.LDSLML8 M PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35MX.LPSLMI8 M PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35MX.LUSLMP3 M PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35RX.LUSLMR8 M/I PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35RX.LUSLMP8 M/I PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35MX.LUSLMR8 M/I PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35MX.LUSLMH8 M/I PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35RX.LUSLMH8 M/I PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35MX.LPSLMG8 M/I PWB(PCB) ASSEMBLY,MAIN MC049B RZ-21FB35RX.LPSLMG8 M/I SCREW,DRAWING PAN WASHER 6mm 35mm SCREW TAP TITE(P),TRUSS HEAD + D4.0 L16.0 MSWR3/FZB

TRANSISTOR

Q104 Q11 Q301 Q401 Q402 Q501 Q502 Q503 Q504 Q505 Q507 Q508 Q510 Q601 Q802 Q803 Q805 Q807 Q808 Q808 0TR319709AB 0TR126609AA 0TR198009BA 0TRSA10004A 0TR233109AA 0TR198009BA 0TR198009BA 0TR198009BA 0TR198009BA 0TR534309AA 0TR198009BA 0TR534309AA 0TR534309AA 0TR198009BA 0TR534309AA 0TR102009AB 0TR534309AA 0TR127409AB 0TR102009AB 0TR102009AB KTC3197,TP(KTC388A),KEC KTA1266-Y(KTA1015) TO92 50V 150MA 2SA1980Y TP AUK TT2170LS-YB11 ST TO-220FM 1500V 5A KSC2331-Y TP SAMSUNG TO-92L 2SA1980Y TP AUK 2SA1980Y TP AUK 2SA1980Y TP AUK 2SA1980Y TP AUK 2SC5343Y TP AUK 2SA1980Y TP AUK 2SC5343Y TP AUK 2SC5343Y TP AUK 2SA1980Y TP AUK 2SC5343Y TP AUK KRC102M(KRC1202) KEC TP 2SC5343Y TP AUK KTA1274-Y TO-92L TP KEC KRC102M(KRC1202) KEC TP KRC102M(KRC1202) KEC TP

CAPACITOR

C10 C101 C103 C104 C106 C107 C108 C109 C11 C110 C111 C12 C126 C13 C14 C201 C202 C203 0CX2200K409 0CQ2721N409 0CN1040K949 0CN1030F679 0CN1030F679 0CN1030F679 0CN1030F679 0CN1030F679 0CX2200K409 0CN1030F679 0CE227DD618 0CE107DD618 0CE475DK618 0CN1040K949 0CN1020K519 0CN1010K519 0CN1010K519 0CN4710K519 22P 50V J SL TA52 0.0027UF D 100V 5% PE TP5 0.1UF D 50V 80%,-20% F(Y5V) TA52 10000PF D 16V 20% X5R TA52 10000PF D 16V 20% X5R TA52 10000PF D 16V 20% X5R TA52 10000PF D 16V 20% X5R TA52 10000PF D 16V 20% X5R TA52 22P 50V J SL TA52 10000PF D 16V 20% X5R TA52 220UF STD 10V M FL TP5 100UF STD 10V M FL TP5 4.7UF STD 50V 20% FL TP 5 0.1UF D 50V 80%,-20% F(Y5V) TA52 1000PF D 50V 10% B(Y5P) TA52 100PF D 50V 10% B(Y5P) TA52 100PF D 50V 10% B(Y5P) TA52 470P 50V K B TA52
D301 D403 D405 D405 D406 D406 D407 D501 D502 D503 0DD400509AA 0DRTW00164B 0DD060009AC 0DRTW00164B 0DD060009AC 0DRTW00164B 0DD060009AC 0DD414809ED 0DD414809ED 0DD414809ED 1N4005 TP KEC RGP15J TP52 DO15.V 1.5A 50A 250NSEC TVR06J TP - 600V 250NSEC RGP15J TP52 DO15.V 1.5A 50A 250NSEC TVR06J TP - 600V 250NSEC RGP15J TP52 DO15.V 1.5A 50A 250NSEC TVR06J TP - 600V 250NSEC 1N4148 TP GRANDE 1N4148 TP GRANDE 1N4148 TP GRANDE

- 22 -

For Capacitor & Resistors, the charactors at 2nd and 3rd digit in the P/No. means as follows;

DESCRIPTION 2.2 OHM 1/2 W(7.0) 5.00% TA52 2.2 OHM 1/2 W(7.0) 5.00% TA52 1.1K OHM 1/6 W 5.00% TA52 5.1K OHM 1/6 W 5.00% TA52 5.6K OHM 1/6 W 5% TA52 10K OHM 1/6 W 5% TA52 1K OHM 1/6 W 5% TAOHM 1/6 W 5% TA52 18K OHM 1/6 W 2.00% TA52 1.1K OHM 1/6 W 5.00% TA52 5.6K OHM 1/6 W 5% TA52 2.2 OHM 1/6 W 5.00% TAOHM 1/6 W 5% TA52 1K OHM 1/6 W 5% TAOHM 1/6 W 5% TA52 6.8K OHM 1/6 W 5.00% TA52 6.8K OHM 1/6 W 5.00% TA52 6.8K OHM 1/6 W 5.00% TAOHM 1/6 W 5% TA52 6.8K OHM 1/6 W 5.00% TA52 6.8K OHM 1/6 W 5.00% TA52 6.8K OHM 1/6 W 5.00% TA52 0.47M OHM 1/2 W 5% TA52 RWR 7W 1.0 OHM J PD 47K OHM 2 W 5% TR 47K OHM 2 W 5% TR 0.18 OHM 2 W 5% TA62 PRW 220 OHM 1/2 W(7.0) 5.00% TA52 1.5K OHM 1/6 W 5% TA52 1K OHM 1/6 W 5% TAOHM 1/6 W 5% TA52 8.2M OHM 1/2 W 5.00% TA52 1K OHM 1/6 W 5% TAOHM 1/6 W 5.00% TA52 0.47M OHM 1/2 W 5% TA52 4.7K OHM 1/6 W 5% TA52 4.7K OHM 1/6 W 5% TA52 1K OHM 1/6 W 5% TA52 1.5K OHM 1/6 W 5% TA52 2.2K OHM 1/6 W 5.00% TA52 4.7K OHM 1/6 W 5% TA52 4.7K OHM 1/6 W 5% TA52 4.7K OHM 1/6 W 5% TA52 4.7K OHM 1/6 W 5% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5.00% TAOHM 1/6 W 5% TAOHM 1/6 W 5% TAOHM 1/6 W 5% TA52 1/2 W 1.5K,10%,PLIKOR(HIGH SURGE) 1/2 W 1.5K,10%,PLIKOR(HIGH SURGE) 1/2 W 1.5K,10%,PLIKOR(HIGH SURGE)

LOCA. NO R912 R914

PART NO 0RD2204A609 0RD0102F609
DESCRIPTION 2.2M OHM 1/2 W(7.0) 5.00% TAOHM 1/6 W 5% TA52

SWITCH

SW11 SW12 SW13 SW14 SW15 SW16 SW801 140-315A 140-315A 140-315A 140-315A 140-315A 140-315A 6600VM2002A TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V SDKEA3 ALPS IEC 250V 8A HORIZONTAL 480G

FILTER & CRYSTAL

FB201 FB801 FB802 FB803 FB825 T802 X11 Z101 125-123A 125-022K 125-022K 125-022K 125-022K 150-F06W 6212AA2994A 6200QL3001Z FERRITE BFD3565R2F(TAPING) FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM FERRITE AXIAL 62MM 1UH NY 3.5X6.0MM SQE2930 36MH 0.5PHY 105TURN. RESONATOR,CRYSTAL HC-49U 20.25MHZ B39361-X6966-D100 EPCOS ST
JK202 PJ201 PJ201 6612M00005A 6613V00006A 6613V00006B UPJ-R1-027 UGCOM CH1 3P+EAR(PJ6062A) 2P+EAR(PJ6062B)

ACCESSORIES

A1 A1 A1 A1 A1 A1 A2 A3 3828VA0492C 3828VA0492F 3828VA0492L 3828VA0492M 3828VA0492N 3828VA0492Q 6710V00124E 5010V00004B MANUAL,OWNERS HS112P/R/124D/E TX 050A MANUAL,OWNERS IS 112P/R/124D/E TX MANUAL,OWNERS MK 112P/R/124D/E TX 051A/B/C MANUAL,OWNERS PL 112P/R/124D/E TX 017B MANUAL,OWNERS RO 112P/R/124D/E TX 008C MANUAL,OWNERS CZ/SK 112P/R/124D/E TX 051B/C REMOTE CONTROLLER,MC049B TXT 35KEY CI ANTENNA, 3SECTION 750MM NTSC W/ADP

MISCELLANEOUS

F801 P902 PA01 SK901 T402 TH801 TU101 VD801 0FS4001B53C 387-603E 6712SCA226B 6620VBC003A 6174V-6006M 163-051F 6700VS0002H 164-003G FUSE,SLOW BLOW 4000MA 250 V 5.2X20 CONNECTOR ASSEMBLY, 9P 2.5MM 430MM REMOTE CONTROLLER RECEIVER,KSM-913LG1T SOCKET (CIRC),CPT PCS030A 8PIN 14/360 FBT, BSC25-NYY THERMISTOR,PTC J503P84D140M290Q TUNER, TAEW-G003D LGIT MULTI VS VARISTORTVR621D14A THINKING 620V

- 26 -

P/NO: 3854VA0162A - S1 2004.6.12
SVC. SHEET : 3854V A0162A-S

P/NO : 3828VD0202M

Dec.,2004 Printed in Korea

 

Tags

VGN-FZ11S DEH-P88rsii EWF1040 TC-WE305 KH 2382 AD-43 DPX503U Qtek 9100 Dvdr3480 MW73E-SB Printer LBP3360 ECM-HQP1 Di351F DSP-AX10 UX-F24CL Polaroid X530 SC-BT300 AQV18nsan FS-8000 KNA-G520 IR-HD1000 Laserjet 2840 CMM1000 42PFL5522D 05 PMA-1060 1490LMT Inter-TEL 8560 Review RX-DS35 Muvo TX PT-540 37LT7 Singer 1100 JBL LX55 B2330 BM300 EMP-7800 SGH-J700G WGE101 Nokia 2320 Sx-lx03 ICF-5900W LCD92VX Clean Plus Dimage G500 AGE21DH ADC77550W R202LI 07E 63 TA-FE610R 70 MZ-5 DP5900 DVD-V3650 FX-18 AMW 545 Edge PC Timer TX-32PH40 WD-14112FD TA-RW244 A803E Microtower PC Urc 8910 SCX-4500-XEU 1900-303 STR-SL5 BX625FWD Notebook Picturemate 240 KV-EF29m90 Republic Dect5251S Casio 4317 E1120 2 0 Nokia 6288 PS50C430a1W Syncmaster 460P Future Wg WH CT636 Rev 1 Travelmate-7510 Sis761 5055E Canoscan-lide 60 LN-T375HA SGH-E600 FS 249 WD-14401TD Robot Cafe DSC-S2100 21AA3356-21B GS50-6EA2 Mounts VR-500 PDP2335 GA-6wmmc7 DSM627 DEH-1550B

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101