Reviews & Opinions
Independent and trusted. Read before buy LG S24AHP-nd6!

LG S24AHP-nd6

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
LG S24AHP-nd6, size: 3.9 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

About LG S24AHP-nd6
Here you can find all about LG S24AHP-nd6 like manual and other informations. For example: review.

LG S24AHP-nd6 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a LG S24AHP-nd6 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your LG S24AHP-nd6 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
achaoge 7:49pm on Wednesday, June 30th, 2010 
Panasonic GF1 Screen Protector The screen protector does exactly what it says on the packaging! Great reception as well - no loss of channels Some people experience poor quality image when replacing a freewview box with a more expansive PVR box.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc1

Visit us at http://www.lgservice.com

LG Room Air Conditioner

OWNER'S MANUAL
Prior to installation, this airconditioning unit must be submitted for approval by the utility service which provides electricity (EN 61000-2, EN 61000-3 Norm).
Dear Owner Thank you for installing LG air conditioner. Your best choice guarantees you a great performance and service to make your life comfortable & pleasant.

IMPORTANT

Please read this owner's manual carefully and thoroughly before installing and operating your room air conditioner. Please retain this owner's manual for future reference after reading it thoroughly.

P/No.: 3828A24010C

Room Air Conditioner Owners Manual

TABLE OF CONTENTS

A. Safety Precautions..3 B. Electrical Safety..6 Temporary Use of an Adapter..6 Temporary Use of an Extension Cord.6 Symbols used in this Manual..6 C. Product Introduction..7 Indoor Units..7 Operation Indication Lamps.8 Outdoor Unit..8 D. Operating Instructions.9 How to insert the Batteries..9 Wireless Remote Controller Maintenance..9 Operating Method..9 Wireless Remote Controller..10 Operation Mode..11 Healthy Dehumidification Operation.12 Auto Operation (Cooling Only Model)..12 Auto Changeover Operation (Heat Pump Model)..12 Jet Cool/Heat Operation..13 NEO PLASMA Purification Operation (Optional)..13 Auto Clean (Optional).13 Energy-Saving Cooling Mode (Optional)..14 Forced operation..14 Sleep Mode...15 Setting the Current Time.15 Timer Setting..15 Vertical / Horizontal Airflow Direction Control (Optional)..16 Air Circulation Mode..16 Auto Restart Function.16 E. Maintenance and Service.17 Indoor Unit..17 Outdoor Unit..19 Operation Tips!.19 Self-Diagnosis Function..19 Troubleshooting Tips! Save time and money!..20 Call the service immediately in the following situations..20

FOR YOUR RECORDS

Write the model and serial numbers here: Model # Serial # You can find them on a label on the side of each unit. Dealer's Name Date Purchased I Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues.

READ THIS MANUAL

Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner. You'll find many answers to common problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting Tips first, you may not need to call for service at all.

PRECAUTION

Contact the authorized service technician for repair or maintenance of this unit. Contact the installer for installation of this unit. The appliance is not intended for use by young children or infirm persons without supervision. Young Children should be supervised to ensure that they do not play with appliance. When the power cord is to be replaced, replacement work shall be performed by authorized personnel only using only genuine replacement parts. Installation work must be performed in accordance with the National Electric Code by qualified and authorized personnel only. If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.

2 Room Air Conditioner

Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed. I Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications. This symbol indicates the possibility of death or serious injury. This symbol indicates the possibility of injury or damage. I Meanings of symbols used in this manual are as shown below.
Be sure not to do. Be sure to follow the instruction.
Always use a power plug and socket with a ground terminal. There is a risk of electric shock. For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center. Do not disassemble or repair the product by yourself. There is risk of fire or electric shock. Use the correctly rated breaker or fuse.
Do not use a defective or underrated circuit breaker. Use the correctly rated breaker and fuse. There is risk of fire or electric shock. Always ground the product as per the wiring diagram. Do not connect the ground wire to gas or water pipes lightening rod or telephone ground wire. There is risk of fire or electric shock. Do not modify or extend the power cable. If the power cable or cord has scrathes or skin peeled off or deteriorated then it must be replaced. There is risk of fire or electric shock. Never install the outdoor unit on a moving base or a place from where it can fall down. The falling outdoor unit can cause damage or injury or even death of a person. When installing the unit, use the installation kit provided with the product.

Do not use a multi consent. Always use this appliance on a dedicated cicuit and breaker. Otherwise it can cause electric shock or fire. Install the panel and the cover of control box securely.
There is risk of fire or electric shock due to dust , water etc. For installation, removal or reinstall , always contact the dealer or an Authorized Service Center. There is risk of fire, electric shock, explosion, or injury. When the product is soaked (flooded or submerged) in water , contact an Authorized Service Center for repair before using it again. There is risk of fire or eletric shock. Be sure to use only those parts which are listed in the svc parts list. Never attempt to modify the equipment.
There is risk of fire or electric shock. Do not install the product on a defective installation stand. Be sure that the installation area does not deteriorate with age. It may cause product to fall. In outdoor unit the step-up capacitor supplies high voltage electricity to the electrical components. Be sure to discharge the capacitor completely before conducting the repair work. An charged capacitor can cause electrical shock.
Otherwise the unit may fall and cause severe injury.
The use of inappropriate parts can cause an electrical shock, excessive heat generation or fire.

Owner's Manual 3

Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly so that there is no force pulling the cable from the connection terminals. Improper or loose connections can cause heat generation or fire. Be sure to check the refrigerant to the used. Please read the label on the product. Incorrect refrigerant used can prevent the normal operation of the unit. Do not place a heater or other heating appliances near the power cable. There is risk of fire and electric shock. Do not use the product in a tightly closed space for a long time. Perform ventilation regularly. Oxygen deficiency could occur and hence harm your health. Ventilate the product room from time to time when operating it together with a stove, or heating element etc. Oxygen deficiency can occur and hence harm your health. Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit. This could result in personal injury and product damage. Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installation or svc and then tear away and thraw away the plastic packaging bags. Children may play with them and cause injury. Don't use a power cord, a plug or a loose socket which is damaged. Otherwise it may cause a fire or electrical shock. Do not allow water to run into electric parts. Install the unit away from water sources. There is risk of fire, failure of the product, or electric shock. Do not open the front grille of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure. Turn the main power off and unplug the unit when cleaning or repairing the product. There is risk of electric shock. Take care to ensure that power cable could not be pulled out or damaged during operation. There is risk of fire or electric shock. Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the plug completely.

Dirty, loose or broken power plug can cause electric shock or fire. Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out There is risk of electric shock or fire. Do not store or use or even allow flammable gas or combustibles near the product. There is risk of fire. If strange sounds, smell or smoke comes from product.Immediately turn the breaker off or disconnect the power supply cable. There is risk of electric shock or fire. When the product is not to be used for a long time, disconnect the power supply plug or turn off the breaker. There is risk of product damage or failure, or unintended operation. Do not place ANYTHING on the power cable. There is risk of fire or electric shock.
Do not plug or unplug the power supply plug to turn the unit ON/OFF. There is risk of fire or electric shock.
When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on. Do not use the telephone or turn switches on or off. There is risk of explosion or fire.
Two or more people must lift and transport the product. Avoid personal injury. Keep level even when installing the product. To avoid vibration or noise.
Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause corrosion on the product. Do not install the product where the noise or hot air from the outdoor unit could damage or disturb the neighborhoods. It may cause a problem for your neighbors and hence dispute.
Install the drain hose to ensure that the condensed water is drained away properly. A bad connection may cause water leakage. Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant levels may cause failure of product.

4 Room Air Conditioner

Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of property. Do not touch the metal parts of the product when removing the air filter. There is risk of personal injury. Do not insert hands or other objects through the air inlet or outlet while the product is operating. There are sharp and moving parts that could cause personal injury. Do not tilt the unit when removing or uninstalling it. The condensed water inside can spill. Do not block the inlet or outlet of air flow. Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing water etc. There is risk of fire, electric shock, or damage to the plastic parts of the product. Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary. A dirty filter reduces the efficiency. If the refrigerant gas leaks during the repair, do not touch the leakaing refrigerant gas. The refrigernat gas can cause frostbite (cold burn) If the refrigerant gas leaks during the installation, ventilate the area immediately. Otherwise it can be harmfull for your health.

It may cause product failure. Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and failure of product. Be cautious when unpacking and installing the product. Sharp edges could cause injury. Do not mix air or gas other than the specified refrigerant used in the system. If air enters the refrigerant system, an excessively high pressure results, causing equipment damage or injury. Replace the all batteries in the remote control with new ones of the same type. Do not mix old and new batteries or different types of batteries. There is risk of fire or product failure. Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open. Moisture may condense and wet or damage furniture.
Dismantling the unit, treatment of the refrigerant oil and eventual parts should be done in accordance with local and national standards. If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.
Do not recharge or disassemble the batteries. Do not dispose off batteries in a fire. They may burn or explode. Do not expose your skin or kids or plants to the cool or hot air draft.
This could harm to your health.
Do not drink the water drained from the product. It is not sanitary and could cause serious health issues.
Use a firm stool or ladder when cleaning, maintaining or repairing the product at an height. Be careful and avoid personal injury.
OPERATING TEMPERATURE(C) - Non Inverter Model
COOLING MODE INDOOR MAX. 32C INDOOR MAX. 27C MIN. 20C MAX. 24C MIN. 21C HEATING MODE OUTDOOR MIN. 1C MAX. 43C OUTDOOR MIN. 21C
OPERATING TEMPERATURE(C) - Inverter Model
COOLING MODE INDOOR MAX. 32C INDOOR MAX. 30C MIN. 18C MAX. 24C MIN. 18C HEATING MODE OUTDOOR MIN. -10C MAX. 43C OUTDOOR MIN. -10C

Owner's Manual 5

Electrical Safety
This appliance must be properly grounded. To minimize the risk of electric shock, you must alway plug into a grounded oulet. Do not cut or remove the grounding prong from the power plug. Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through the house wiring. If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and circuit checked by a qualified electrician.
Temporary Use of an Adapter
We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections, use only a genuine adapter, available from most local hardware stores. Ensure that the large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection. To disconnect the power cord from the adapter, use one hand on each to avoid damaging the ground terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground terminal damage.

Never use the appliance with a broken adapter.
Temporary Use of an Extension Cord
We strongly discourage the use of an extension cord due to potential safety hazards. For temporary situations, use only CSA certified and UL listed 3-wire grounded extension cords, rated 15 A, 125 V.
This appliance should be installed in accordance with national wiring regulations. This guide acts as a guide to help to explain product features.
Symbols used in this Manual
This symbol alerts you to the risk of electric shock. This symbol alerts you to hazards that may cause harm to the air conditioner.
This symbol indicates special notes.

6 Room Air Conditioner

Product Introduction
Here is a brief introduction of the indoor and outdoor units. Please see the information specific to your indoor unit type.

Indoor Units

Standard Split Type Display panel LED indicators
Air inlet Grille tab Plasma filter (Optional) Front grille ON/OFF button

Air filter

Air outlet
Louvers (Vertical blades)
Signal receiver Flap (Horizontal blade)
Art Cool Type Display panel LED indicators
Front panel Signal receiver Plasma filter

ON/OFF button

Air discharge

Power cord

Art Cool Type Wide Display panel LED indicators
Plasma filter Air inlet Front panel Power cord Air filter Signal receiver

Owner's Manual 7

Art Cool Deluxe(Type 1) Display panel LED indicators Art Cool Deluxe(Type 2) Display panel LCD indicators

Air inlet Plasma filter

Air inlet Air filter Plasma filter
Air filter Air discharge Front panel Power cord Signal receiver ON/OFF button
Air discharge Front panel Signal receiver Power cord ON/OFF button
Operation Indication Lamps
On/Off Sleep mode : Lights up during the system operation, error code and auto restart setting. : Lights up during sleep mode auto operation.(non-Inverter Model)
Energy-Saving : Lights up during Energy-Saving Cooling Mode Operation(Inverter Model only) Cooling Mode Plasma Timer : The function illustrates its dynamic mode by using a multiple lighting system. : Lights up during timer operation.(non-Inverter Model) Lights up during timer operation or sleep mode auto operation (Inverter Model only) : Lights up during outdoor unit operation. (Cooling model only)
Defrost mode : Lights up during defrost mode or *hot start operation (Heat pump model only)

OUT DOOR

Outdoor unit operation
Power Display : Indicates the setting temperature and operation mode.
Operation Cooling, heating, mode Dehumidification Standard Mode Setting Shape of display temperature Auto operation mode Too hot Hot Comfortable Cold Too cold Jet Test Energy-saving Cool/Heat cooling mode operation Auto clean

* Hot start operation: Stops the indoor fan in heating operation for minutes to prevent cold air from blowing out from unit. * In defrost mode unit stops heating operation for few minutes to remove formation of ice on the heat exchanger coils to maintain the efficiency.

Outdoor Unit

Air intake vents Connecting wires Refrigerant pipes
Air outlet vents Base plate Drain hose

8 Room Air Conditioner

Operating Instructions
How to insert the Batteries
1. Remove the battery cover by pulling it according to the arrow direction. 2. Insert new batteries making sure that the (+) and (-) of battery are installed correctly. 3. Reattach the cover by sliding it back into position.
1. Always use/replace both batteries of same type. 2. If the system is not to be used for a long time, remove the batteries to save their working life. 3. If the display screen of remote controller starts, fading replace both of the batteries.
Wireless Remote Controller Maintenance
1. Choose a suitable place where its safe & easy to reach. 2. Fix the holder to wall etc with the supplied screws firmly. 3. Slide the remote controller inside the holder.
1. Remote controller should never be exposed to direct sunlight. 2. Signal transmitter & receiver should always be clean for proper communication. Use a soft cloth to clean them. 3. In case some other appliances also get operated with remote control, change their position or consult your serviceman.

Operating Method

1. The signal receiver is inside the unit. 2. Aim the remote controller towards the unit to operate it. There should not be any blockage in between.

Owner's Manual 9

Wireless Remote Controller
The controls will look like the following.

Signal transmitter

CANCEL ON OFF SET AUTO CLEAN

Flip-up door (opened)

Operation Mode
Cooling Operation Auto Operation or Auto Changeover
Healthy Dehumidification Operation Heating Operation
1. START/STOP BUTTON Used to turn off/on the unit. 2. OPERATION MODE SELECTION BUTTON Used to select the operation mode. 3. ROOM TEMPERATURE SETTING BUTTONS Used to select the room temperature. 4. INDOOR FAN SPEED SELECTOR BUTTON Used to select fan speed in four steps low, medium, high and CHAOS. 5. JET COOL BUTTON Used to start or stop the speed cooling. (It operates fan in super high speed in cooling mode) 6. CHAOS SWING BUTTON Used to stop or start louver movement and set the desired up/down airflow direction. 7. ON/OFF TIMER BUTTONS Used to set the time of starting and stopping operation. 8. TIME SETTING BUTTONS Used to adjust the time. 9. TIMER SET/CANCEL BUTTON Used to set and to cancel the timer operation. 10. SLEEP MODE AUTO BUTTON Used to set sleep mode auto operation. 11. AIR CIRCULATION BUTTON Used to circulate the room air without cooling or heating. ENERGY-SAVING COOLING MODE BUTTON (INVERTER MODEL) Used to set energy-saving cooling mode operation. 12. ROOM TEMPERATURE CHECKING BUTTON Used to check the room temperature. 13. PLASMA BUTTON(OPTIONAL) Used to start or stop the plasma-purification function. 14. HORIZONTAL AIRFLOW DIRECTION CONTROL BUTTON (OPTIONAL) Used to set the desired horizontal airflow direction. 15. RESET BUTTON Used prior to resetting time. 16. 2nd F BUTTON Used prior to using modes printed in blue at the bottom of buttons.

Healthy Dehumidification

To run the healthy dehumidification mode follow steps 1, and 2 and 4 (See operation mode)
Auto Operation (Cooling Only Model)
In this operation mode the actual setting temperature and the fan speed are automatically set by the electronic control logic based on the current room temperature. If you feel hot or cold press the temperature setting buttons respectively for more cooling or heating effect. NOTE : You cannot set the actual setting temperature and the indoor fan speed in this operation mode. But you can use the Chaos swing in this operation. If the system is not operating as desired, switch manually to another mode. To run the auto operation follow steps 1, and 2. (See operation mode)
Auto Changeover Operation (Heat Pump Model)
Auto operation basically is heating or cooling function of the air conditioner. But during this operation the controller changes the operation mode automatically to keep the temperature within 2C with respect to the setting temperature.

Auto Changeover

To run this operation follow steps 1, 2, 3, and 4. (See operation mode)

12 Room Air Conditioner

Jet Cool/Heat Operation
Jet cool function can be used to cool the room quickly in hot summer. When this function is turned on, the air conditioner runs in cooling operation mode with super high fan speed and 18C setting temperature for 30 minutes for fast and effective cooling. Similarly, jet heat function (available only in some models) warms up the room quickly by operating at super high fan speed and 30C setting temperature for 60 minutes.
You can activate this operation by pressing the JET COOL BUTTON. To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.
Jet cool function cannot be activated during heating or auto changeover operations. In case of Inverter, Art Cool and Art Cool Wide(non-Deluxe) model, you can use jet heat function by pressing JET COOL BUTTON for heating operation. Art Cool and Art Cool Wide models close the side discharges during jet cool/heat operation, for strong cooling and heating.

NEO PLASMA Purification Operation (Optional)
Plasma filter is a technology developed by LG to get rid of microscopic contaminants in the intake air by generating a plasma of high charge electrons. This plasma kills and destroys the contaminants completely to provide clean and hygienic air.
Plasma purification can be started by pressing the PLASMA BUTTON on the remote controller. Repressing it will deactivate the operation.
This feature can be used in any operation mode and any fan speed can be used while plasma filter is functioning.

Auto Clean (Optional)

During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification operation can be removed.

AUTO CLEAN

1. Press the AUTO CLEAN BUTTON to activate this function. 2. Now whenever the unit is turned off, the indoor fan is still running for about 30 minutes internally without cooling or dehumidification operation. Also the louver is closed. 3. This dries up any remains of moisture & cleans the unit internally. 4. If you press AUTO CLEAN BUTTON again during operation, this function is cancelled.
During auto clean function, only START/STOP BUTTON, PLASMA BUTTON and AUTO CLEAN BUTTON can be used.

Owner's Manual 13

Energy-Saving Cooling Mode (Optional)
Energy-saving cooling mode can save energy in cooling and healthy dehumidification operation, because it can operate efficiently by setting body-adaptation time according to the change of time and temperature and adjusting automatically desired temperature. 1. Press the START/STOP BUTTON to start the unit. 2. Open the door on the remote controller. Select cooling operation or healthy dehumidification operation. 3. Press the ENERGY-SAVING COOLING MODE BUTTON. 4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING COOLING MODEL BUTTON again and unit will operate in previous mode(Cooling or healty dehumidification mode).
Display Luminosity (Optional)
The Display Luminosity can be adjusted by using the remote control. Press the start/stop button to start the unit. Open the door on the remote control, press the 2ndF button and, press display luminosity button. Display will be dark. Press the button again to set bright display.

Forced operation

Operation procedures when the remote control can't be used. The operation will be started if the ON/OFF button is pressed. If you want to stop operation, re-press the button.
Cooling Model Operating mode Indoor FAN Speed Setting Temperature Cooling High 22C
Room Temp. 24C Cooling High 22C
Heat pump Model 21C Room Temp. < 24C Healthy Dehumidification High 23C
Room Temp. < 21C Heating High 24C

Test operation

During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature and resets in 18 minutes. During test operation, if remote controller signal is received, the unit operates as remote controller sets. If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1 "beep". If you want to stop the operation, re-press the button.

14 Room Air Conditioner

Sleep Mode
1. Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop automatically. 2. The timer is programmed in one-hour increments by pressing the SLEEP MODE AUTO BUTTON 1 to 7 times. The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the SLEEP MODE AUTO BUTTON while aiming at air conditioner. 3. (In case of non-Inverter Model) Make sure the sleep mode LED lights up. To cancel the sleep mode, press the SLEEP MODE AUTO BUTTON several times until the sleep mode LED lights off. (In case of Inverter Model) Make sure the Timer LED lights up. To cancel the sleep mode, press the SLEEP MODE AUTO BUTTON several times until the Timer LED lights off.
The sleep mode will operate indoor fan at slow speed in cooling mode and at medium speed in heating mode for pleasant sleep. Art Cool and Art Cool Wide (non-Deluxe) close the lower discharge partially in sleep mode for pleasant sleep. In cooling mode or healthy dehumidification mode: The setting temperature will rise automatically two times by 1C over next consecutive 30 minutes (2C in 1 hour) for a comfortable sleep. Now this will be the final setting temperature as long as sleep mode is functioning.

Setting the Current Time

1. Time can be set only when you press the RESET BUTTON. Having replacing the batteries, you should press the RESET BUTTON to reset the time. Press the Start/Stop button. 2. Press 2nd F button and check if icon is on.

CANCEL SET

3. Press the TIME SETTING BUTTONS until the desired time is set. 4. Press the TIME SET/CANCEL BUTTON.
Check the indicator for A.M. and P.M.

Timer Setting

1. Make sure to set current time correctly on the display of the remote controller. 2. Press 2nd F button. 3. Press the ON/OFF TIMER BUTTONS to turn timer on or off. 4. Press the TIME SETTING BUTTONS until the desired time is set. 5. To set the selected time, press the TIMER SETTING BUTTONS aiming the remote controller at the signal receptor. To cancel the timer setting Check if icon is off. Press the TIMER CANCEL BUTTON aiming the remote controller at the signal receptor. (The timer lamp on the air conditioner and the display will go off.)

ON OFF

Select one of the following four types of operation.

Delay off timer

Delay on timer

Delay off and on timer

Delay on and off timer

Owner's Manual 15

Vertical / Horizontal Airflow Direction Control (Optional)
The up/down airflow (Vertical airflow) can be adjusted by using the remote controller. 1. Press the START/STOP BUTTON to start the unit. The left/right(Horizontal airflow) can be adjusted by using the remote control. 1. Press the START/STOP BUTTON to start the unit. 2. Press the HORIZONTAL AIRFLOW DIRECTION BUTTON. 3. The louvers will swing left & right automatically.
2. Press CHAOS SWING BUTTON.
3. The louvers will swing up & down automatically.
4. To stop the louver at a desired angle, press again
4. To stop the louvers at a desired angle, press again.
By pressing the CHAOS SWING BUTTON the horizontal air flow direction is changed automatically based on the chaos algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable as if enjoying natural breeze. Always use the remote controller to adjust the up and down air flow direction. Manually moving the vertical air flow direction louver by hand could damage the mechanism.When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.

Air Circulation Mode

This operation circulates the air without cooling or heating. It can be activated by pressing the AIR CIRCULATION BUTTON. Once the air circulation is activated you can select the air speed by pressing the INDOOR FAN SPEED SELECTOR BUTTON.
CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically changed from high to low or vice versa, depending on the ambient temperature. In case of inverter type models where there is no AIR CIRCULATION BUTTON, air circulation can be operated by pressing the PLASMA BUTTON.

Auto Restart Function

This function is useful in the situation of power failure. When power regains after a failure this feature restore the previous operating condition and the air conditioner will run in the same settings.
This feature is enabled by factory default setting, but you can disable it by pressing the ON/OFF button for 6 seconds. The unit will beep twice and the indicator lamp(2) will blink 4 times. To enable it, press the button again for 6 seconds. The unit will beep twice and the indicator lamp(1) will blink 4 times.

16 Room Air Conditioner

Maintenance and Service
Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and unplug the power cord.

Indoor Unit

Clean the unit with a soft dry cloth. Do not use bleach or abrasives. Never use any of these Water hotter than 40C. It may cause deformation and discoloration. Volatile substances. They may damage the surface of the air conditioner.

G a s o li n e

Air Filters
The air filters behind the front panel / grill should be checked and cleaned once in every 2 weeks or more often if necessary. To remove the filters see the self explanatory diagrams for each model type. Clean the filters with a vacuum cleaner or warm soapy water. If dirt is not easily removed, wash with a solution of detergent in luke warm water. Dry well in shade after washing and reinstall the filters back in place.

Plasma Filters

The plasma filters behind the air filter should be checked and cleaned once in every 3 months or more often if necessary. To remove the filters see the self explanatory diagrams for each model type. Clean the filters with a vacuum cleaner. If it is dirty wash it with water and dry well in shade an install back in place.

Deodorizer Filters

Remove the deodorizer filters behind the air filter and expose them in direct sunlight for 2 hours. And then insert these filters into original position.

Removal of Filters

1. Art Cool Type : Pull down the grille bottom, after lifting out the filter tab a bit and take the filter out slowly. Remove the plasma filter as shown. After cleaning and drying well reinstall the filter and grille by matching the hook.

Front panel hook

Front panel Air filter Plasma filter

Hookhanger

2. Art Cool Type Wide : The procedure of removal of filters is same as in Art Cool Type model as shown above. Don't touch this plasma filter within 10 seconds after opening the inlet grille, it may cause an electric shock.

Owner's Manual 17

3. Deluxe (Type 1): Open the upside of the panel and lift it up as shown. The hooks of the panel will come off. Remove the air filters. Then pull out the plasma filter

Plasma filter

Front panel Panel hook
After cleaning and drying well reinstall the filters in their original position. 4. Deluxe (Type 2): Open the front panel as shown. Then pull the filter tab slightly forward to remove the air filter. After removing the air filter remove the plasma and deodorizer filter by slightly pulling forward.

Problem Possible Causes I The air conditioner is unplugged. I The fuse is blown/circuit breaker is tripped. Air conditioner does not start I Power failure. What To Do Make sure the air conditioner plug is pushed completely into the outlet. Check the house fuse/circuit breaker box and replace the fuse or reset the breaker. If power failure occurs, turn the mode control to OFF. When power is restored, wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload. If the voltage is unusually very high or low the circuit Breaker will trip. Make sure there are no curtains, blinds, or furniture blocking the front of the air conditioner. Clean the filter at least every 2 weeks. See the Maintenance and Service section. When the air conditioner is first turned on, you need to allow time for the room to cool down. Check for open furnace floor registers and cold air returns. Make sure they are correct. Check and remove such source or turn it off while using the air conditioner.
I High voltage. I Airflow is restricted.
I The air filter is dirty. Air conditioner does not cool as it should I The room may have been hot.
I Cold air is escaping. I Check the temperature settings. I There might be any heating source in the room.
Call the service immediately in the following situations
1. Anything abnormal such as burning smell, loud noise etc. happen. Stop the unit and turn the breaker off. Never try to repair by yourself or restart the system in such cases. 2. Main power cord is too hot or damaged. 3. Error code is generated by self diagnosis. 4. Water leaks from indoor unit even if the humidity is low. 5. Any switch, breaker (safety, earth) or fuse fails to work properly User must carry routine checkup & cleaning to avoid units poor performance. In case of special situation, the job must be carried out by service person only.

20 Room Air Conditioner

 

Tags

VCE-160 Bread XXL Portege 2010 MW87Y-S KAC-5201 Pocketcam 3200 Istart 2479 Hunter Alfa 159 CMT-CPX1 Vi 1255 Ds-2090AT-TC DEI 556U Phonefax 2620 DCD970KL Review Aspire-3100 NS-P300 Odelia 453 DB315 Vluu I70 Officejet 6210 VGN-TZ31vn X Z740 Zoom E8410 29PT9009 Allies E7010 Studio 8 MY231X Calculator 32s-L 32PF5331 12 Designer Prestige 791R SPK 48 KEH-P3700R KDC-W6031 DDW-F30A Yaourtiere 8872 ICD-SX20 FD1216 Sfera 125 WG1805RY6 RUE-4191-space-remote-space-FOR-space-nve-n077PS System Um 110 Sbchc8440-05 ICD-MX50 AM6010EV-M 42PFL5322-10 Asus A4 Bluetooth TU-80 SC-HT440 300 B LE32A436 446 B2100-5-M CMT-HP7 TBC-1000 Tsl 602 MYX-5-2 Pentax K-M N GO DVX9700 PLC-XF20 KX-MB771E 1800 R Siemens CF61 RD-MD5 Extreme TDP-MT200 AVC-A1HD Kxtg6512 WA80N2 Pc2001N 1020 FAX OW3000 UN55B8000XF KX-T123210BE C521BEE AS-5000 R-967 96ST PB8250 Deluxe 40830 FW-C80 DVP-FX850 PD 25 HC-4500 SL-67B SP1203N-KIT Hunters Ranger-2003 Canon HF10 CD-GT1mkii Coolpix 3200 TX-28A1 T40 II AIR-SA15TI 32PF9986-12

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101