CONTENTS

Warnings Specification Installation Preparing your laundry Adding detergent Control panel How to use your washing machine Delayed washing Maintaining Trouble-shooting guide 26 28

Warnings

You must read the whole of this instruction book before you use the appliance. Follow the advice carefully. Keep the book for future reference. If you sell or give away the appliance, make sure that the book is passed to the new owner. The following warning are provided in the interests of overall safety. You must read them before the appliance is installed or used. This appliance is designed to be used by adults. Children should not be allowed to touch the controls or play with the product. It is dangerous to modify the specifications of this appliance in any way. This appliance is heavy. Care should be taken when moving it. All packaging and transit bolts must be removed before the appliance is used. Serious damage may occur if this is not done. Any plumbing work required to install this appliance should be carried out by a qualified plumber or a competent person. Any electrical work required to install this appliance should be carried out by a qualified electrician or a competent person. Make sure that the appliance does not stand on its electrical supply cable. If the machine is situated on a carpeted floor, please adjust the feet to ensure that air can circulate freely. Always unplug the appliance and turn off the water tap after use. Do not overload the appliance. Only wash fabrics which are designed to be machine washed. If in doubt, follow the instructions you find on the label of the item itself. Avoid electric heaters, candles, etc. near the machine. It may ignite or deform the machine. Don t sprinkle water. It may cause a fire or electric shock. Use the exclusive 220V-240V outlet with ground terminal. Do not use an extension cord or double adapter. Make sure that all pockets are empty. Hard, sharp objects such as coins, safety pins, nails, screws or stones can cause extensive damage. Do not wash laundry stained with edible oil, machine oil, dry-cleaning oil, gasoline, etc. It may cause fire or explosions. This appliance is designed for donestic use. It must not be used for purposes other than those for which it was designed. Do not machine wash fabrics which are saturated with petroleum products. If volatile cleaning fluids have been used, make sure that they are thoroughly removed from the fabric before it is placed in the appliance. Do not operate near places with ignitable material such as gasoline, benzene, etc. or inflammable gas leak. Due to volatile nature of these material, It can cause fire or explosions. Use only the recommended quantities of fabric softener. An excessive amount could damage the laundry. Leave the porthole door slightly ajar between washes to preserve the door seal. Before you open the door of the machine check that the water has drained. Do not open the door if you can still see water. Pets and children may climb into the washing machines. Check your appliance each time before use. The glass door becomes very hot during washing. Keep children away from the appliance while it is in use. You should not attempt to repair the machine yourself Repairs carried out by inexperienced or unqualified persons may cause injury and/or more serious faults to the machine. This product should be serviced by an authorized Service Centre only, and only genuine spare parts should be used. When disposing of your old washing machine, the electric cable must be cut off and the door catch must be made inoperative to avoid it becoming a death trap for a child. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Specification

Power plug
If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.

Drawer

(For detergent and fabric softener)

Control panel

Drain hose Door
Lower cover Drum Drain pump filter Drain plug Levelling legs Lower cover cap Emergency door release
Name Power supply Size Weight Wash capacity Heating Spin speed Water consumption Permissible water pressure

: : : : : : : : :

Front loading washing machine 220-240 ~, 50Hz 600mm(W) 600mm(D) 850mm(H) 63kg 7,0kg 2100W 600/800/1000/1200 rpm 67 (9,6 / kg ) 0,3-10kgf/ (30-1000kPa)
The appearance and specifications may be varied without notice to raise the units quality

Accessories

Inlet hose(1EA)

Spanner

How to disassemble the transit bolts.
To protect the washer during transportation, the special 4 bolts are locked. Before operating the washer, remove the bolts. ( If they are not removed, it may cause heavy vibration, noise and malfunction) 1. Locate the 4 bolts that secures the back cover. 2. Unscrew the 4 bolts with a spanner provided. 3. Take out the 4 bolts. 4. Insert the 4 caps provided into the hole.
Keep the transit bolts and spanner for future use in case the machine is to be transported again.

Level adjustment

1. Select a place for installation Place it at a firm and even floor Place it more than 2cm away from the wall or other furniture 2.Check the gap Ensure all feet are firmly on the floor. 3.Level adjustment
Position The front is low The rear is low The left is low The right is low Adjustment Turn the front 2 levelling legs clockwise. Turn the rear 2 levelling legs clockwise. Turn the left levelling legs of the front and rear clockwise. Turn the right levelling legs clockwise.
Levelling leg Higher Lower

Levelling leg

If the washer is not levelled, it may cause noise or vibration.
After adjusting the level, check it by shaking the washer. Readjust the level if necessary. Levelling should be done within 1.5 degree angle.

Electrical connection

Do not use an extension cord or double adapter. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. Always unplug the machine and turn off the water supply after use. Connect the machine to an earthed socket in accordance with current wiring regulations. The appliance must be positioned so that the plug is accessible.

Water drain

Hook over the edge of a sink using the plastic hose hanger supplied with the machine. Make sure there are no kinks in the hose and that it is no crushed. Secure the hose so that it can not be dislodged while the appliance is running. The drain hose should not be placed higher than 85cm above the floor.
Connecting the inlet hose (How to connect the hose of screw type.)
Two rings are supplied with the water inlet hose in the valve connector in order to prevent water leaks. Your machine comes with only cold water connection. Connect to cold water using the inlet valve. Check water tightness of washing machine connections by turning the tap completely on. Periodically check the condition of the hose and replace the hose if necessary. Make sure that there are no kinks in the hose and that it is not crushed.
Hose connector Rubber seal

Preparing your laundry

Check pocket for any articles (coin, safety pin, paper clips, etc.) Close zips and fasten button or hooks : loose belt or ribbons should be tied together. Never wash whites and coloureds together. Follow the wash code symbols on each garment label and manufacturers washing instructions.

Soiled condition

Heavily soiled

Washing

- Pre wash - Main wash - Main wash

Temperature

Heavily soiled cottons Normally soiled cottons Colored cottons Synthetics Delicate fabrics Woollens : cold - 95 : cold - 95 : cold - 60 : cold - 60 : cold - 40 : cold - 40 C C C C C C

Normally Soiled

Adding detergent
Where to place the detergent
Pull out the detergent drawer. Put the detergent and fabric softener in the detergent drawer before washing. Close the detergent drawer completely.
The drawer for fabric softener
Do not leave the fabric softener in the detergent drawer for more than 2 days. (Fabric softener could harden) Do not open the drawer during water fill cycle. Softener will automatically add during last rinsing cycle. Do not fill past MAX indicator. Do not use solvents (benzine, etc.)

Softener level

Detergent for main wash

Fabric softener

Detergent for pre wash
Programs with PRE-WASH MAIN-WASH only
The detergent should be used according to the instruction of the detergent manufacturer. If the detergent is used over the recommended amount too many bubbles will be generated thus causing an inferior washing result. Which will cause malfunction. Use detergent only for drum washing machine.

Detergent dosages

Do not exceed manufacturers recommended dosages as shown on the detergent package. The amounts depend on
degree and type of soiling amount of wash - full load : according to manufacturers' instructions - part load : 3/4 of the normal amount - minimum load (about 1kg) : 1/2 the amount used for full load Water hardness in your area.
Choosing the right detergent
The type of detergent depends on
the type of fabric (cotton, synthetic, delicate items, wool) colour wash temperature degree and type of soiling NOTE : use appropriate detergent only for wool

Rinse hold

If you desire to leave your fabrics in the machine without spining after rinse to prevent them getting winkled, you may select rinse hold by pressing the (Rinse) button. To drain and spin, press the (Rinse) button or (Start/Pause) button to turn off the rinse hold lamp.

Wash program selector

6 programs can be selected depending on the type of laundry. If the power button is pressed, Coloreds program is automatically set. By pressing the (Programme) Whites) button,[ (Coloreds) Rapid) Delicate) Wool) Synthetic) ] can be selected.

Error display

The display blinks if there is an error. (no Inlet) : Trouble with water supply. (Imbalance) : The laundry is titled to one side. (no drain) : The drain filter is clogged or the drain pump is out of order.

Power button

Press the button to turn power on and off. Press the button to cancel the delay finish.

Start/Pause button

Use the button to start or pause wash cycle. The power turns off automatically 4 minutes after the pause button is pressed.

LED display

Display the remaining time (Hour : Minute) to finish. In case of abnormal operation, error indications are displayed. ( ) See trouble shooting guide.

(Power)

(Start/Pause) (Wash) (Rinse) (Spin) (Water Temp.) (Time Delay) (Programme) (Door Lock) (Door Open)
For manual wash, rinse and spin speed
Use these buttons to change wash/rinse/spin. When lamp is off no selection has been made. (Prewash) is available for (Coloreds), (Whites), (Synthetic).
Water temperature selector
Press the button to select water temperature. The water temperature [60 Cold) 30 ] can be selected in Coloreds, Synthetic 95 is selected for Whites only. By pressing the button during operating the washer, the present temperature is displayed.

Door Lock lamp

It shows whether the door can be opened or not. When the lamp is on, the door cant be opened.

Door open button

Press the button to open the door. Only operates when the power plug is connected to 220-240V outlet.

Delay finish

Press the button when delayed washing is needed. When the button is pressed, [ ]is delayed. A maximum delay of [ ] hours can be set. Each press advances time delay by one hour. (Time Delay) means the time required from the present to the completion of washing.
Once Child-Lock is set, all buttons are inoperable during operation. The Child-Lock system can be set at any time even including during PowerOff, on Pause and operation. It is automatically cancelled when an operational error occurs and when the cycle ends. When power is off, the LED indicates [ ] only. During operation, or when the program is paused the LED will indicate [ ]and the remaining time.
How to use your washing machine
The whole washing process is carried out automatically with just one touch.
(If no program is selected, (Coloreds) program will commence.)

Prepare the washing

Make sure that the machine is plugged in the electric supply. Turn on the cold water tap. Press the (Door Open) button. Load the laundry and close the door. Put the detergent and fabric softener into drawer.
In case of automatic washing
1. Press the (Power) button. 2. Press the (Start/Pause) button to start the washing machine. The (coloreds) program is carried out automatically. 3.The optimum wash program is selected once the load is detected.
To change the washing program
1. Press the (Power) button. 2. [ (Coloreds) (Whites) Rapid) (Delicate) (Wool) (Synthetic)] will appear in order by pressing the (Programme) button. Make adjustment to water temperature, rinse or spin cycles to suit your wash needs by pressing these buttons.
Select the function to change rinse, spin and water temperature. ( ) indicates manual operations.
Programme Wash Rinse Spin Water Temp.

Washing time

about one hour & 46 minutes about 2 hours & 23 minutes about 43 minutes about one hour & 9 minutes about 45 minutes about one hour & 46 minutes

Coloreds

Colored blouses, aprons, shirts, bed linen Bed and table linen, towels, underwear white or colour-fast For quick washing of less dirty laundry or frequently used towels.
Main wash ( Pre + Main) ( + Main wash Pre Main) Normal (Super)
( + Normal Rinse Hold) ( Super Rinse Hold)
800 ( , 600, 1000,1200) 800 ( , 600, 1000,1200) 600 ( , 800, 1000,1200) 600 ( 600 )

Whites

Rapid Delicate

Main wash

Delicate curtains, dresses, skirts, shirts etc. Laundry easily shaped or damaged. Only machine washable woolens with pure new wool label. Polyamide, Acrylic, Polyester

Wool Synthetic

( + Main wash Pre Main)

3. Press the

(Start/Pause) button to start the cycle.

Completion of washing

If the washing is completed, the display shows [ button and take out the laundry. Switch off the appliance and turn off the tap. ] with a beep. Press the (Door Open)
More convenient manual operations of Coloreds program
It is more convenient to operate manually in program is firstly set with power on. In Coloreds,
When you want wash only, press the (Wash) button to select the washing mathod. When you want rinse only, press the (Rinse) button to select the rinsing mathod. When you want spin only, press the (Spin) button to select the Spin speed. When you want wash and rinse only, press the (Wash) button and [Rinse] button to select each method. When you want rinse and spin only, press the (Rinse) button and (Spin) button to select each method.
(Coloreds) program than in others because Coloreds

The Child-Lock system

The Child-Lock system can be programed and cancelled by pressing the both (Time Delay) buttons simultaneously. (Water Temp.) and
Child-Lock (If you want to lock all the buttons to prevent all the setting from a child or infirm persons, you can use this option.) If you want to change the program when the Child-Lock system is on, 1. Press both (Water Temp.) and (Time Delay) buttons. 2. Press the (Start/Pause) button. 3. Change the desired program and press the [Start/Pause] button.
Change the desired program
(Water Temp.) (Time Delay) (Start/Pause) (Start/Pause)
If you want to deacitvate Child -Lock during wash cycle, press both (Time Delay) simultaneously.

(Water Temp.) and

If the lamp turn off, the door can be open by pressing the (Door open) button, additional laundry can be put in during the washing. In other words, it shows whether the door can be open or not. In case of adding laundry (when is off)
Close the door after Adding the laundry.
(Start/Pause) (Door Open) (Start/Pause)
If the lamp is on, select spin cycle to drain water and press the than (Door Open) button to open the door.

(Start/Pause) button and

Delayed washing
Plug the power into the exclusive 220-240V outlet. Turn on the water tap. Put in the laundry and close the door. Place the detergent and fabric softener in the drawer.
1. Press the 2. Press the 3. Press the
(Power) button (Programme) selection button to select the program you require. (Time Delay) button

(Time Delay) button.

Select the rinse, spin and the water temperature. Select the finish time you require by pressing the

Time Delay setting.

Example) If you want to complete the washing after 5 hours, press the (Time Delay)button and adjust the time.
Press the (Time Delay) button.
Press the (Time Delay) button twice and set the time to [ ]

(Time Delay)

Minimal 3 hours delay
The washing will be completed after 5 hours
Time delay is possible between 3 to 19 hours and not possible under 3 hours. Time delay does not proceed during power failure. According to the condition of water supply and temperature, the delayed time and the actual washing time can be slightly different. The (Power) button can be use to cancel the time delay. Each press advances time delay by one hour. 4. Press the (Start / Pause) button
All lamps except the time delay and the remaining time display will be turned off.
The washing is completed at the selected time
Unplug the appliance and turn off the tap.
The washing program for when you go out.
If you are unable to unload the washing machine at the end of delay cycle, it is best to select the no spin Rinse Hold. or use

Maintaining

Unplug the power plug prior to maintaining Clean the filter periodically every 3 months.
Clean the filter in the inlet valve
When no water flows through detergent drawer, or filter is clogged with foreign material (no inlet) is displayed of the control panel.

Turn off the water tap.

Unplug the power plug from the outlet.
Disconnect the inlet hose
Pull out the filter with a tool or by gand and clean it using a toothbrush.
Connect the inlet hose and check water leakage.
Insert the filter in its original place.
Clean the drain pump filter
Open the lower cover cap by using coin.
Unplug the drain plug ( ), then the water flows out, At this time use a vessel to prevent water flowing on the floor. If the water does not flow any more, turn the pump filter ( ) open to the left.
Take out any foreign material from the pump filter ( ). After cleaning, turn the pump filter ( ) clockwise and insert the drain plug ( )to the original place. close the lower cover cap.
1 Turn off the water tap and remove the inlet hose. 2

Drain water in the machine using drain plug ( ).
When the machine is frozen
Pour hot water (about 50 C ) on the faucet and remove the inlet hose.
2 Submerge the separated hose in hot water (about

50 C ).

Pour the hot water in the drawer and maintain it for 10 minutes for melting.
4 Connect the inlet hose to the water tap and check
the drain after turning on the water tap and operating the washing machine.
Maintenance of the drawer
Pull out the drawer slightly upware.

2 Wash it clearly.

3 Insert it in its original place.

Trouble - Shooting guide

Check the following before asking for service if the error massage is displayed during washing, rinsing, spinning. Request for service in the case of failure or damage except the followings.

Symptom

Check points
Is the water tap turned off ? Is the water frozen?

Solution

Turn the water tap on. Melt it with 50C hot water

(no inlet)

Is the water pressure low or the filter clogged ?
Disconnect the inlet hose and clean the filter.
Is there foreign matter in the drain filter ?
Clean and remove foreign material from drain filter.

(no drain)

Is the drain hose bent or higher than 85cm above the floor ? Is the hose clogged ?
Put the drain hose evenly. Place the drain hose under 85cm from the floor. Melt it with 50C hot water.

Is the hose frozen ?

Is the laundry tilted to one side in the drum?
Spread the laundry evenly. Release imbalance by pressing the [Start / Pause ] button. If it happens after rinsing or spinning, call for service. Install it on a firm and even floor.

(imbalance)

Is the washer leveled?

Is the door opened?

Close the door. If [ ] is not released, call for service.
Unplug the power plug and call for service

Symptom Check points

If the water overfills due to the abnormal water valve, you will get display. is displayed if the water level sensor malfunctions. Close the water tap. Unplug the power plug. Call for service. Over load in motor.

Motor is not operating.

Over load in motor.
Did you press the [ Power ] button? Is the power plug unplugged? Is the power supply correct?

Turn it on.

Plug it to power supply. Use exclusive 220-240V outlet with ground terminal.
Is the short-circuit breaker turned off?
Did you use more detergent than recommended? Did you use low suds detergent for the front loading washing machine? Did you remove the transit bolts? Is the washer tilted? Is the drain pump clogged with foreign matters ? Is the washer loaded with excessive clothes? Refer
Use the recommended amount. Use detergents for front loading washing machines only.
Remove it. install it on the firm and even floor and level it. Remove foreign matter from the drain filter. Remove the excessive loads.

P/No.: 3828ER3003Z