WASHING MACHINE SERVICE MANUAL

CAUTION

READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLES CORRECTLY BEFORE OFFERING SERVICE.
MODEL : WD-14311(6)RD/WD-1481RD WD-12311(6)RD WD-14312(7)RD/WD-14310(5)RD WD-12312(7)RD/WD-12310(5)RD WD-10PFD, 10PFP WD-14311RDA WD-1485RD/WD-1488RD AWD-14312(7)RD AWD-12312(7)RD
OCT. 2004 PRINTED IN KOREA

P/No.:3828ER3035G

CONTENTS
1. SPECIFICATION....3 2. FEATURES & TECHNICAL EXPLANATION... 4 3. PARTS IDENTIFICATION... 6 4. INSTALLATION..... 7 5. OPERATION.....10 6. WIRING DIAGRAM / PROGRAM CHART...12 7. TROUBLE SHOOTING....13 7-1.BEFORE SVC CHECKING...13 7-2.QC TEST MODE....13 7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY..13 7-4.ERROR DISPLAY....14 8. ERROR DIAGNOSIS AND CHECK LIST...16 8-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION..16 8-2. FAULT DIAGNOSIS AND TROUBLE SHOOTING...19 9. DISASSEMBLY INSTRUCTIONS....29 10. EXPLODED VIEW AND PARTS LIST....39 10-1. THE EXPLODED VIEW OF CABINET ASSEMBLY..39 10-2. THE EXPLODED VIEW OF CONTROL PANEL AND DISPENSER ASSEMBLY.40 10-3. THE EXPLODED VIEW OF DRUM AND TUB ASSEMBLY..41 10-4. THE EXPLODED VIEW OF DRYER...42

1. SPECIFICATION

WD-1481RD/WD-14311RDA, WD-14311(6)RD/WD-12311(6)RD/ WD-14312(7)RD/WD-12312(7)RD/ WD-14310(5)RD/WD-12310(5)RD/ AWD-14312(7)RD/AWD-12312(7)RD

WD-1485RD

WD-1488RD
WD-10PFD, 10PFP WD-14311RD
POWER SUPPLY PRODUCT WEIGHT WASHING SPIN ELECTRICITY CONSUMPTION FAN MOTOR DRAIN MOTOR WASH HEATER DRY HEATER WASH REVOLUTION SPEED 2000W
220V-240V~, 50Hz 66kg 140W 300W 25W 40W 2100W 1500W 45rpm WD-1481RD/WD-14311RDA/WD-14311(6)RD/WD-14312(7)RD/

110V~, 60Hz

1200W 1000W
WD-14310(5)RD/AWD-14312(7)RD/WD-10PFD/WD-10PFP/WD-1488RD WD-12311(6)RD/WD-12312(7)RD/WD-12310(5)RD/AWD-12312(7)RD
400/800/1000/1400 rpm 400/800/1000/1200 rpm
OPERATION WATER PRESSURE CONTROL TYPE WASH CAPACITY DRY CAPACITY DIMENSION WASH PROGRAM RINSE DOOR SWITCH TYPE WATER LEVEL RESERVATION SENSING OF THE LAUNDRY AMOUNT FUZZY LOGIC DISPLAY OF THE REMAINING TIME ERROR DIAGNOSIS POWER AUTO OFF CHILD LOCK AUTO RESTART TIME SAVE
0.3-10kgf/cm (30-1000kPa)
0.3-10kgf/cm (30-800kPa) 0.3-10kgf/cm2 (30-1000kPa)
Electronic 8kg/8.5kg/10.1kg(Cotton) 4kg/4.2kg/10.1kg(Cotton) 600mm(W) 645mm(D) 850mm(H) Cotton, Cotton-Eco, Synthetic, Delicate, Wool/Silk, Hand Wash, Quick 30, Duvet, Drain Normal / Rinse+ / Rinse++ / Normal+Hold / Rinse++Hold Bi-Metal type 10 steps (by sensor) From 3 hours to 19 hours Adapted Adapted Adapted 10 items Adapted Adapted Adapted Adapted 10kg/10.1kg 6kg/10.1kg
2. FEATURES & TECHNICAL EXPLANATION

2-1.FEATURES

Automatic process from washing to drying. Automatic process from washing to drying can be selected easily. Washing capacity : 8kg/8.5kg/10.1kg(Cotton)/10kg Drying capacity : 4kg/4.2kg/10.1kg(Cotton)/6kg
More economical by Intelligent Wash System
Intelligent Wash System detects the amount of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.

Direct Drive system

The advanced Brushless DC motor rotates the Drum directly without belt and pulley.

Child-Lock

The Child-Lock system has been developed to prevent children from pressing any button to change the program during operation.
Low noise speed control system
By sensing the amount of load and balance, evenly distributes load to minimize the spinning noise level.

Auto Restart

Although the washing machine is turned off by a power failure, it restarts automatically in its stopped process when power is supplied again. And it will be the same when the machine unplugged in operation is plugged in again.
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature, selected washing temperature and laundry amount.
water temperature washing time
selected washing temperature

FUZZY LOGIC

rinsing time spin rhythm, time
the best washing performance

laundry amount

SENSING

PROCESSING

DETERMINATION

EFFECT

2-3.WATER LEVEL CONTROL
This model adopts a pressure sensor which can sense the water level in the tub. Water supply is stopped when the water level to the preset level, then washing program proceeds. Spinning does not proceed until the water in the tub reduces to a certain level.

3. PARTS IDENTIFICATION

()

5 () 2 1

ACCESSORIES

Spanner

4. INSTALLATION
Before servicing ask troubles of customers Check the adjustment(power supply is 220-240V~, remove the transit bolts.) Check the troubles referring to the trouble shooting. Decide service steps referring to disassembly instructions. And then, service and repair. After servicing, operate the appliance whether it works O K or NOT.

STANDARD INSTALLATION

The appliance should be installed as follows.

REMOVE THE TRANSIT BOLTS

Remove the transit bolts (4EA:)with supplied spanner. Keep the transit bolts and spanner for future use. Insert the 4 caps provided into the hole
INSTALL THE APPLIANCE ON FLAT AND FIRM SURFACE

ADJUST THE HORIZONTAL

Turn the leveling feet to set the appliance horizontally.
The appliance goes up by rotating the feet clockwise. The appliance come down by rotating the feet counter clockwise.
HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the valve connector. Connect the inlet hose firmly to prevent leak.

CONNECT DRAIN HOSE

Make sure that the hose is not twisted.
Avoid submerging the end of the hose.
The drain hose should be placed under 100cm from the floor. CONNECT POWER PLUG
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, It may be the cause of the fire.

TEST OPERATION

Preparation for washing.

Press the POWER button.

Press the Start/Pause button.
Connect the power plug to the outlet. Connect the inlet hose.
In case of Coloreds program.

Check the water heating.

Check automatic reverse turn.

Check the water supply.

Press the Temp. button and the present temperature will be displayed.
Check if the drum rotates clockwise and counterclockwise.
Check if water is supplied through the detergent dispenser.

Check drain and spin

Power off and open the door

Water removal

Turn off Wash and Rinse after pressing the Start/Pause button and start the machine again. Check drain and spin. Power off and then power on. Check if the door can be opened after 3 minutes. If SVC is needed during check, remove the remaining water by pulling out the hose cap.

5. OPERATION

Use this button to turn the power On/Off.
This display shows: a) the estimated time remaining in the cycle when operating. b) an error code when an error has been detected.
Use this option to pre Press and hold PRE lock/unlock control.
When Child lock is se buttons are disabled can lock the washer w
Rotate the Cycle selector knob to select the cycle designed for different types of fabric and soil levels.
Use this button to Start/ Stop the washer.
Pre Wash: Use this option for loads that need pretreatment. It add 16 minutes prewash and drain. Rinse+Spin: Use this option to rinse and then spin. Soak: Use this mode to wash normal clothes or think and heavy clothes which are excessively dirty. Spin Only: When you want Spin only, select this option. Dry Only: When you want Dry only, select this option.

TIME DELAY

These lights show which portion of the cycle the washer is operating. Allows the start of any cycle to be delayed for 3~19 hours.
event unwanted use of the washer. WASH button for 3 seconds to
et, CHILD LOCK lights and all except the Power button. You while it is operating.

INTENSIVE

If the laundry is heavily soiled Intenive option is effective. By selecting the Intensive option, the wash time may be extended, depending on the program selected. To use this option press the Intensive button once before the wash program is started.
Rinse, Spin, Temp. Button
Select a water temperature based on the type of load you are washing. To change the spin speed, press the Spin Speed button repeatedly to cycle through available options. To change the soil level, press the Soil Level button repeatedly until the desired setting is on.

DRY Button

Dry programs selected by pressing the Dry button. By pressing the button [Cupboard - Very - Time Low Temp.- Iron] can be selected.
6. WIRING DIAGRAM / PROGRAM CHART
About 1:50 About 1:15 About 55 About 1:05 About 1:00 About 30 About 2:00 About 2:50 About 33 About 46 About 28 About 17 About 30

7. TROUBLE SHOOTING

7-1.BEFORE SVC CHECKING
Be careful of electric shock or disconnecting the parts while trouble shooting. Voltage of each terminal in 220-240V~ and DC while applying an electric current.

7-2.QC TEST MODE.

Pressing Rinse, and Spin button simultaneously. Press the Power button, while the above condition. Press the Start/Pause button as follows. Number of times the Start/Pause button is pressed None 1 time 2 times 3 times 4 times 5 times 6 times 7 times 8 times 9 times 10 times 11 times 12 times Check Point Turns on all lamps and locks the door. Tumble clockwise. Low speed Spin. High speed Spin. Inlet valve for prewash turns on. Inlet valve for main wash turns on. Inlet valve for hot water turns on. Inlet valve for dry water turns on. Tumble counterclockwise. Heater turns on for 3 sec. Circulation pump turns on. Drain pump turns on. Power off and unlock the door. rpm (40~50) rpm (600~650) rpm (1300~1350) Water level frequency (25~65) Water level frequency (25~65) Water level frequency (25~65) Water level frequency (25~65) rpm (40~50) Water temperature Water level frequency (25~65) Water level frequency (25~65) Turn off all lamps. Display Status
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY
Press the Rinse and Spin button simultaneously.
The digits means water level frequency(10-1 kHz) ex) 241 : Water level frequency = 241 10-1 kHz =24.1 kHz
7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR AT OPERATING CONDITION.
Thermistor in tub : Press the [Temp.] button. Thermistor in dry duct : Press the [Dry] button. Thermistor in condensing duct : Press the [Intensive] and [Spin] button simultaneously.

7-5.ERROR DISPLAY.

If you press the Start/Pause button in error condition, any error except will disappear and the machine will change into pause status. In case of , , if the error is not resolved within 20 sec., and in case of other errors, , if the error is not resolved within 4 min., power will be turned off automatically and the error only will be blinked. But in case of power will not be turned off. , ERROR 1

WATER INLET ERROR

SYMPTOM
Not reached to the water level(246)within 8 minutes after water supplied or not reached to the preset water level within 25 minutes. Not fully drained within 10 minutes. Water is over flowing(over 8 level). If is displayed, drain pump operates to drain water automatically. The sensor pressure switch is out of order. In case of operating the reservation function or the other function with door opened. Close the door, then the error display is resolved. The door switch is out of order.
DRAIN ERROR OVERFLOW ERROR
SENSOR PRESSURE S/W ERROR DOOR OPEN ERROR
IMBALANCE ERROR HEATING ERROR
The appliance is tilted. Laundry is gatherd to one side. The THERMISTOR is out of order.
MAIN PWB ASSEMBLY is out of order Replace the MAIN PWB ASSEMBLY Winding in the STATOR ASSEMBLY is short-circuited. Replace the STATOR ASSEMBLY is dispplayed during a high spin Replace the LEAD WIRE ASSEMBLY (MOTOR) The connector in the LEAD WIRE ASSEMBLY is not connected to the connnector of STATOR ASSEMBLY Reconnect or repair the connector The hall sensor is out of order/defective. Replace the STATOR ASSEMBLY The Dry Heater is out of order Replace the Dry Heater The Connector of the Dry Heater is not connected properly to the connector in the Main PWB ASSEMBLY Reconnect or repair the connector The Dry fan motor is out of order Replace the fan Motor.

CURRENT ERROR

MOTOR ERROR

DRY HEATOR ERROR

8. ERROR DIAGNOSIS AND CHECK LIST
8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION

SYMPTOM NO POWER

GUIDE FOR SERVICE CALL
Is the power plug connected firmly to 220-240V~ outlet?
Power failure? or Breaker opened?

Visit to check

Water inlet trouble Is " " displayed?

No Inlet

Is the tap opened?

Is the tap frozen?

Is the water supply shut-off?
Is filter in the inlet valve clogged with foreign material? Clean the filter of inlet valve
SYMPTOM Door does not open Error displayed on the program
Started with door opened?

Close the door

Visit to check Check if the door switch is O.K.

DRAIN TROUBLE

Is "

" displayed?

Is the debris filter clogged with foreign material such as pin, coin and etc.? Clean up the filter.
Is the drain hose frozen with water, kinked or crushed? NO Visit to check
SYMPTOM Suds overflow from the appliance. (In this condition, wash and spin do not operate normally)
GUIDE FOR SERVICE CALL Is low-sudsing detergent for the drum washing machine used?
Is the proper amount of detergent used as recommended? YES Recommend to reduce the using amount of detergent.

LOW-SUDSING

This appliance has the automatic suds sensing function which operates under much suds condition for good rinse and preventing overflow. When much suds are sensed, suds removing function such as drain, water input and pause will operate without rotating the drum.

effect of softener No

Is softener put in the correct compartment of the drawer?
Is the drawer closed during wash?
Is the softener cap clogged?
Explain how to use softener < Clean the compartment for softener >
8-2.FAULT DIAGNOSIS AND TROUBLE SHOOTING
1. Be careful of electric shock or disconnecting the parts while trouble shooting. 2. First of all, check the connection of each part terminal with wiring diagram. 3. If you replace the MAIN PWB ASSEMBLY, Put in the connectors correctly.

NO POWER

When measuring the voltage of the outlet, is the voltage AC 220-240V~?

Check the fuse?

Is the led(1) on?
<PWB ASSEMBLY (MAIN)>
Replace MAIN PWB ASSEMBLY
Is connector(2) disconnected or disassembled?

YES NO

Reconnect the PWB ASSEMBLY
Is wire of the PWB ASSEMBLY disconnected?

Replace PWB ASSEMBLY

NO WATER SUPPLY
Is water supply shut-off?
When you press both Rinse button and Spin button simultaneously, is the water level frequency below 240?

NO YES YES NO

Open the tap.
Check the AIR CHAMBER and the tube clogged with impurity.
Is the inlet valve filter clogged with impurity?

Clean the filter.

Is resistance between each terminal of INLET VALVE ASSEMBLY is 2~8 k?
Replace the INLET VALVE ASSEMBLY.
Check the voltage of the inlet valve connector 220-240V~. (Refer to 7-2 QC TEST MODE)
Replace the MAIN PWB ASSEMBLY
DETERGENT DOES NOT FLOW IN

Is water supplied?

NO YES NO

Refer to NO WATER SUPPLY

Wiring diagram
Are replaceptacles correctly connected to the terminals of the INLET VALVE ASSEMBLY?
Is detergent put in the correct compartment of the drawer?
Check the wiring on the dispenser. Put the detergent in the correct position
PRE+MAIN MAIN WASH : Detergent
Is the detergent hardened?

Clean the drawer.

SOFTENER DOES NOT FLOW IN

NO YES

Refer to NO WATER SUPPLY Check the wiring on the dispenser.
Are receptacles correctly connected to the terminals of the INLET VALVE ASSEMBLY?
Put it in the correct compartment.
Clean the cap and drawer.

ABNORMAL SOUND

Is the motor bolt loosened?

Fix the bolt tightly.

Replace the STATOR ASSEMBLY or ROTOR ASSEMBLY.
Is there friction noise from the motor?

HEATING WITHOUT WATER

When pressing Wash and Rinse at the same time after draining, is the water level frequency 248 ~ 262 or more? When pressing Rinse, Spin buttons at the same time while wash, is the water level frequency between 230 - 243?
Replace the S.PRESSURE SWITCH ASSEMBLY
Checking voltage between two pins as press the POWER button is the voltage 220-240V~?

DRAIN MALFUNCTIONING

Is the drain hose twisted or frozen?
Repair the DRAIN HOSE ASSEMBLY.
Is the impeller of the drain pump clogged?

Remove foreign material.

Is the connector disconnected, disassembled?
Reconnect or repair the connector
Is the coil of the drain pump cut-off? (resistance of coil is 80~150)
Repair the DRAIN PUMP ASSEMBLY.
When checking voltage between connectors (, )on spinning, is the voltage 220-240V~ as the figure?
Repair the MAIN PWB ASSEMBLY.

AC 220-240V

HEATING CONTINUOUSLY ABOVE THE SETTING WATER TEMPERATURE
When checking THERMISTOR on the tub is the THERMISTOR loosened above 2mm from the rubber?
Push the THERMISTOR tightly to the rubber.

SPIN TROUBLE

Check the S.PRESSURE SWITCH ASSEMBLY or HOSE (Pressure). If the problem is on the S.PRESSURE SWITCH ASSEMBLY or the HOSE, replace the S.PRESSURE SWITCH ASSEMBLY or the HOSE.
Check on the spinning, is the frequency of the water level 248 or more. The frequency can be checked by pressing the Wash and Rinse buttons at the same time on the program.

When pressing Rinse, Spin and POWER buttons at the same time after power off, press the Start/Pause button 1 times, is the drum low speed spin?

Normal

Is it disconnected, or disassembled? [Red:3pin(1), GY:4pin(2)]

Correct the connector.

Check the motor connector, is the resistance of the terminal same as the figure? MOTOR TERMINAL (1) Replace the STATOR ASSEMBLY

Resistance of terminal:

~ / ~ / ~ : About 5~15
Does the spring of Latch Hook actuate?

Replace Door Assembly.

Is there clicking sound once or twice when the START/PAUSE button is pressed to start the cycle?
Check the DOOR SWITCH ASSEMBLY Connector and MAIN PWB ASSEMBLY (Red 3 pin, Yellow 4 pin and white 3 pin connector (1)). Replace the DOOR SWITCH ASSEMBLY.
Is DOOR SWITCH ASSEMBLY broken?

[dHE] ERROR DISPLAY

Dry duct
Replace the thermistor. (6322FR2046B)
Condensing duct Thermistor
CHECK FOR DRY HEATER TROUBLE
CHECK FOR DRY FAN MOTOR TROUBLE
Disassemble the cabinet cover and condensing bellows. Is there any foreign object in condensing bellows.

Clean the bellows

Disassemble the dry fan assy and dry duct upper, and clean foreign object in duct and fan.

20~30 Black Yellow

9. DISASSEMBLY INSTRUCTIONS
Disassemble and repair the parts after pulling out power cord from the outlet.

CONTROL PANEL

Unscrew the screws on the top plate. The plate assembly(Top) is pulled back and then upward to arrow direction. The cover(Inner) is disassembled.

PLATE ASSEMBLY(TOP)

The PWB assembly(Display) connectors are disconnected. Pull out drawer, three screws are unscrewed. Push two upper hooks and pull the control panel forward.

PANEL ASSEMBLY(CONTROL)

The PWB assembly(Display) is disconnected.

PWB ASSEMBLY(DISPLAY)

When 6 screws are unscrewed on the PWB insulator and the PWB assembly(Display) is disassembled from the PWB insulator.

PWB ASSEMBLY(MAIN)

The back cover is removed. Two screws are unscrewed. Disconnect connector from the wiring. Pull the PWB assembly (Main) to arrow direction.

DISPENSER ASSEMBLY

The plate assembly(Top)and the cover(lnner)are disassembled. Pull the drawer to arrow direction. Two screws are unscrewed.

DRAWER

The hose clamps and the hose are disassembled. The ventilation bellows are disassembled on the tub.

INLET VALVE

Disconnect the wiring connector.
Remove the valve by two screws of the valve holder. When reconnecting the connector VALVE (DRY) YL/BK - BK GY/WH - BK WH/BK - BK BL/RD - BK BL/RD - BK
VALVE (PRE-WASH) VALVE (NORMAL-WASH) VALVE (NORMAL-WASH) VALVE (HOT)
Open the door completely. Remove the two screws from the hinge. When removing the Door Assembly, it is necessary to hold the Bracket that is inner of the Cabinet Cover.

Removing method of remained water Pull it out from hose. First, prepare a bucket to put in the remained water.

CAP (REMAINING HOSE)

GASKET ASSEMBLY
The cabinet gasket clamp is released. Two screws are unscrewed from the cabinet cover.
Pull plat(-) screwdriver or pully knife into the both sides of filter cover, and pull in out.
Unscrew the screw from the lower side of the cabinet cover.
Unscrew the 2 screw from upper of the cabinet cover.
Disassemble the clamp assembly.

Tub Gasket Clamp

Remove dry gasket clamp by loosening the screw.
When reassembling the gasket, put the drain hole of the gasket downward, then assemble.

Drain Hole

ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Remove the back cover. After loosening the bolt, Rotor, pull out the rotor.

Rotor Bolt

(ROTOR ASSEMBLY)
Remove the 6 bolt from the stator. Disconnect the 2 connectors.
HOW TO ASSEMBLE THE MOTOR

(STATOR ASSEMBLY)

Remove the hinges (Damper) at the Tub. The Hinge(Damper) at the base is pulled off pressing on the snaps at the sharp end.
Hinge (Damper) Friction Damper
The hinge at the base is pulled off. (To arrow direction)

(FRICTION DAMPER)

Remove pump outlet hose. Remove tub pump bellows. Remove cap(Remaining Hose). Disconnect the wiring. Three screws are unscrewed from the cabinet. Remove the pump to arrow direction.

HEATER

Loosen the nut. Remove washing heater by pulling out.
Washing Heater Nut Ring Terminal
When assembling the washing heater, insert the heater to heater clip on the bottom of tub.

THERMISTOR

Pull it out by holding the thermistor bracket. If holding the wire and pulling out it, it may be broken.

SWITCH ASSY, DOOR LOCK

The cabinet cover clamp is removed and the gasket is released. Two screws are unscrewed. The door lock S/W is disconnected form the wiring connector and the strap.
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
Remove washing heater. Remove the foreign object(wire,coin,etc) by inserting long bar in the hole.

DRY DUCT

Dry fan Ass'y
Remove 6 screws and dry fan assembly. Remove 7 screws and dry duct upper.

Dry Duct Upper

Thermostat Dry Heater
Remove 2 screws and dry heater. Remove thermostat.

CONDENSING DUCT

Remove 17 screws from Dry duct upper and Dry fan Assembly.
Remove 5 screws and condensing duct.
10. EXPLODED VIEW AND PART LIST
10-1.THE PART LIST OF CABINET ASSEMBLY

A153 A154 A110

A140 A151 A152 A102 A150 A120 A103 A104 A101

A141 A100 A131

A485 A130 A440 A430

A133 A450

A410 A303 A310 A300 A200

A275 A201 A276

A274 A272 A270
10-2 THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY
F436 F300 F462 F324 F322 F321 F170

F320 F466

F441 F220
10-3 THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY
K350 K360 K143 K123 K351 F140 K411 K410 F310 F463 K146 F465 F464 K121 K125 K122
K320 M105 K110 K141 K111 K310
K105 K115 K410 K130 K135 K610

K512 K560 K510 K611

K131 F145

F467 K550 F461 K540

F468 K344
10-4 THE EXPLODED VIEW OF DRYER

M216 M210 M230 M215

12345678901234567890123456789012123456789012345678901234567890121

02. Market

312- ----------------------- CM 302- ------------------------CM
162 -----------------------BCO
462 -----------------------BCO
014 -------------------------EC
------------------------EC430E
534 -------------------------EC
005 -------------------------EC
015 -------------------------EC
057 -------------------------EC
0003 ----------------------EAM
0013 ----------------------EAM
0033 ----------------------EAM
0053 ---------------------EAM
3422 Thursday, 4 May 2006 , Number
50574-------------------------
04574-------------------------
51574-------------------------
81574-------------------------
41574-------------------------
31574-------------------------
21574-------------------------
09474-------------------------
48474-------------------------
08474-------------------------
38474-------------------------
30074-------------------------

,LCD DVD

UM U~d

UUL U~d

Morphy Richards
58------------------------BCO
9-------------------------EC

Binatone

Delonghi

u g v j{ u

canon,yashica,konica, minolta

- - -

u g ed duB vu

u UN u

: - : :

. .

4 ------------------------EMK
6 ------------------------EMK
2 ------------------------ICM
4 ------------------------ICM
02 ------------------------ICM
05 --------------------------ICM
20074------------------------ 10074------------------------ 11074------------------------ 09374------------------------ 87474------------------------ 37474------------------------ 03474------------------------ -------------------LD-2050WH -------------------LD-2060WHB -------------------WD-2080WH -------------------WD-2080TH -------------------WD-2051WH 124 ------------------------ES 166 ------------------------CM 066 ------------------------CM 07 --------------------------CM
Nearest tMe UH U duB s fJ d bUA t uD UL X b pu Uu neighbor uv bUA U t b t b bb bOMv
----------------------XTW15E
2 ----------------PENTVAPELEX
915- -----------------------ECH -
115- ------------------------EH
905- ------------------------EH
805- ------------------------EH
605- ------------------------EH
105- ------------------------EH
X O dU t Aliasing vUO dUB b tb

KENWOOD

bicubic . nearest neighbor
6167- ------------------------VC 662- ------------------------VC
-----------------------XM5080D -------------------------XM36D -----------------------XM48WS ------------------V-C63000HEV --------------------V-C8000HE --------------------V-4800HTV --------------------V-6100HEV --------------------V-4900CEU -----------------GR-L298ATB -----------------GR-P278ABB -----------------GR-P238ABB -----------------GR-L238ABB -----------------GR-P238ATB -----------------GR-L278ABB -----------------GR-P308ATB -----------------GR-P278BTB ----------------GR-P278ABBG 3701 ------------------------XL ---------------------XTXS160E ---------------------XTXS165E ----------------------XL1072E 3601 -----------------------XL ----------------------XTH170E 051 ----------------------XTRC 5903 ----------------------XTD 0803 ----------------------XTD -------------------------7009S -------------------------7005S -------------------------4006B -------------------------6005B
( ) ( . . moire . . . . . . . .
--------------------V-4300HTV
----------------------V-5000ST
--------------------V-4600HTV

DAEWOO

Delonghi LG LG
0501- ------------------(10)DW
0509- ------------------(9)DW
0504- ------------------ (4/5)DW

21 --------------------------T 0808 ----------------------SW
0821 -------------------------B 2 -----------------------WA90K
99 --------------------------T 88 --------------------------T
2 -----------------------WA12H 0811--------------------------
06 --------------------------T 55 --------------------------T
07 --------------------------T 56 --------------------------T
0501 ----------------------SW 0701 -------------------------P
-------------------(3)WP-590NP
----------------(7)WD-12164FB
---------------(8/5)WF-T8800TP
--------------(6/5)WF-T6800TP
------------------(9)WP-910RSP
-----------------------(7)WD-14120RD
-----------------------(7)WD-16220FD
-----------------------(8)WD-14311RD
-------------------FRS T29B ) ----FRS T29FA (WOOD COLOR -------------------FRS T29FA --------------------FRS T29H ) --------------FRS283(SILVER 382 ----------------------FRS ) --------------FRS281(SILVER 182 ----------------------FRS ) ---------FRS280/2811 (SILVER 1182/082 ------------------FRS 1462 ---------------------FRS ) ------------FRS2311(SILVER 1132 --------------------FRS ) ------------ FRS231(SILVER 132 ---------------------FRS
Uu bicubic tMe UH U duB s fJ d nO u v bMv uK duB vb tMe s X b pu ~vUM v~MUL fJ uu UNK JO bF U duB X uL UN ) (Aliasing . . . )
2-----------------------WA14K

SAMSUNG

- -
03276-------------------------- 02276-------------------------- --------------------GR-658ABP --------------------GR-658ALP -------------------GR-F278JTT ------------------GR-B278JBA --------------------GR-658QVP 651 -------------------------FR 360 -------------------------FF -----------------------FR711W 511 -------------------------FF ----------------------FR630NW ----------------------FR661NW ----------------------FR550NT ----------------------FR590NT 014 -------------------------FR 044 -------------------------FR
) ( --------------- ) (--------------- ) ( --------------- ) (--------------- ) (--------------- ) (--------------- ) (--------------- ) (--------------- R ) ( --------------- ) ( -------------- ) (--------------- -----------------------44204ST ------------------------44204S ------------------------44104ST -----------------------404104S )2000 TSR (------------ )2000LR (-------------- ) (--------------- ) ( --------------- ) (--------------- ) (--------------- ) (--------------- ) (--------------- ) (--------------- ) (--------------- ) (--------------- ) (--------------- ) R (--------------- )2005LT (--------------- )2005ST (-------------