8/14/03

11:26 AM

Page 1

laundry

WD3274RHD
W A S H E R / D R Y E R CO M B O
All-In-One Washer and Dryer
Performance NeveRust Stainless Steel Drum 2.37 cu.ft. (IEC) capacity. The largest
capacity with 24" width installation Direct Drive Motor for the ultimate in durability and reliability 1400 RPM Maximum Spin Speed Ventless Condensing Drying System 115V Power Source
Intelligent Fabric Care SenseClean and Sensor Dry Systems
for intelligent fabric care and water and energy efficiency 5 Wash Programs 4 Wash/Dry Programs 5 Wash Temperature Selections with Built-in Water Boost Heater Sanitary Cycle Delay Wash up to 19 hours
Style and Design Chrome Trimmed door with Clear
Glass that Opens 180 One Touch Electronic Controls with Dial-A-Cycle Large LED Display for Easy Reading
Environmentally Friendly Energy Star LoDecibel Quiet Operation
LG front load washers exceed Energy Star classifications by a minimum of 39%.

www.LGappliances.com

Page 2

SenseClean System

Water level and wash time are automatically optimized based on the weight and size of each load.
Front Loader Intelligent Electronic Controls Dial-A-Cycle Panel Up Front Ventless Condensing 2.37 cu.ft. IEC (2.05 cu.ft. DOE) 15.4 lbs. 8.8 lbs. 140 kWh/year 10.7 gal/cycle Tier 4B 2.02 cu.ft./kWh/cycle Cotton/Towels, Permanent Press, Sanitary, Wool/Silk, Rinse & Spin Cotton/Towels, Permanent Press, Sanitary, Rinse & Spin Hot/Cold, Warm/Warm, Warm/Cold, Cold/Cold, Tap Cold/Cold 1400 RPM, 1000 RPM, 800 RPM, 400RPM, No Spin Drying System

Sensor Dry

Measures moisture in the drum during the cycle, then automatically adjusts the drying time and temperature for optimal fabric care.

c a pa c i ty

Total* Capacity (Wash) Capacity (Dry)

e n e r gy

Direct Drive System
The power is delivered right to the wash drum from the motor without belts, resulting in a highly durable, powerful and quiet washing machine.

Traditional Motor

Energy Consumption Water Consumption (based on Water Factor) Energy Star Compliant CEE Rating MEF (Modified Energy Factor)

wash programs

5 Wash Programs 4 Wash/Dry Programs 5 Wash/Rinse Temperature Levels 5 Spin Speeds Extra Wash Rinse Hold Extra Rinse Dry Only Delay Wash Time Auto-Balancing Water Level Foam-Sensing & Removal Automatic 19 Hours

Direct Drive Motor

fa b r i c c a r e f e at u r e s

SenseClean

co n ve n i e n c e f e at u r e s
3 Detergent Dispenser End of Cycle Beeper Water Heater Large Glass Door with 180 Opening Child Lock/Door Lock

q u a l i ty

Leveling Legs Noise Reduction System 4 Adjustable 55dB (spinning) Direct Drive / Variable Horizontal Axis
moto r a n d a g i tato r
Motor Type / Motor Speed Agitator Type
m ate r i a l s a n d f i n i s h e s
NeveRust Stainless Steel Drum Cabinet Top Transparent Glass Window Door Cabinet Control Panel Colors Painted Steel Plastic White 120W/480W 115V Electric 23 5/8" x 33 1/2" x 24 1/4" (40"D with door open) 25 3/8" x 33 7/8" x 27 5/8" 156 / year (parts and labor) 2 years (control board) 7 years (motor) Lifetime on drum Plastic

p o w e r s o u rc e

Ratings Requirements Type

dimensions

Product (WxHxD) Carton (WxHxD) Weight (lbs): Net / Gross

w a r r a nty

u p c co d e

lg electronics inc.

1000 Sylvan Ave., Englewood Cliffs, NJ 07632 866.473.5554 www.LGappliances.com
All trademarks are property of their respective owners. Design and specifications are subject to change without notice. * Per IEC 60456 washes the equivalent of 2.37 cu.ft. conventional agitator washer.

048231 008037

Printed in August 2003

SS-WD3274RHD

website : http://www.LGservice.com e-mail : http://www.LGEservice.com/techsup.html

WD-3274RHD WD-3276RHD

Washing Machine

OWNERS MANUAL

roduct Feature
Automatic Process From Washing To Drying.
Automatic process from washing to drying can be selected easily.
More economical by Intelligent Wash System
Intelligent Wash System detects the amount of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.

Direct Drive System

The advanced Brushless DC motor rotates the drum directly without belt and pulley.

SPIN TIME DELAY

Child-Lock
The Child-Lock system has been used to prevent children from pressing any button to change the program during operation.

TIME DELAY

Low noise speed control system
By sensing the amount of load and balance, it evenly distributes load to minimize the spinning noise level.

Auto Restart

If the washing machine is turned off by a power failure, it will restart automatically from the position it stopped at adjusting accordingly.

ontents

Important Safety Information...3 Specification...4 Installation....5 Preparation Before Washing..10 Adding detergent...11 Cycles...12 How to Use Washer...13 Maintenance...21 Troubleshooting Guide..24 Warranty....27
mportant Safety Information
READ ALL INSTRUCTIONS BEFORE USE

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury to persons when using the washer,
follow basic precautions, including the following: Read all instructions before using the washer. Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time. Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children. Before the washer is removed from service or discarded, remove the door to prevent children from hiding inside. Do not install or store the washer where it will be exposed to the weather. Do not tamper with controls. Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out. See Installation Instructions for grounding requirements. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials. Interior of washer and condensing duct should be cleaned periodically by qualified service personnel. ALWAYS follow the fabric care instructions supplied by the garment manufacturer. Do not place items exposed to cooking oil in your dryer, Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance. Do not use an adapter or otherwise defeat the grounding plug. If you dont have the proper outlet, consult an electrician.
WARNING : Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician. 3

pecification

Power plug
If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid a hazard.

Drawer

(For detergent and fabric softener)

Control panel

Drain hose Door
Drum Drain pump filter Drain plug
: Front-loading Washing Machine : 120V~, 60Hz : 235/8 235/8 331/2 (inches) 850 (mm) Weight : 1561/2 lbs. (71 kg) Wash capacity : 152/5 lbs. (7.0 kg) Dry capacity : 84/5 lbs. (4.0 kg) Max. Watt : 1200 W Spin speed : No Spin/400/800/1000/1400 Water consumption : 18 gal. (67 l) Permissible water pressure : 4.5 ~ 145 PSI (30 ~ 1000 kPa) Name Power supply Size
Lower cover Adjustable feet Lower cover cap
The appearance and specifications may be varied without notice to raise the units quality.

Accessories

Tie strap Hot/Cold (1 each) Wrench
to secure drain hose to standpipe, inlet hose, or laundry tub

nstallation

Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times. Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance guarantee.

Shipping

The appliance is fitted with shipping bolts to prevent internal damage during transport.

Removing shipping bolts

1. To prevent internal damage during transport, the special 3 bolts are locked. Before operating the washer, remove the bolts along with the rubber bungs. If they are not removed, it may cause heavy vibration, noise and malfunction.
3. Take out the 3 bolts along with the rubber bungs by slightly twisting the bung. Keep the 3 bolts and the spanner for future use.
Whenever the appliance is transported, the transit bolts must be refitted.
2. Unscrew the 3 bolts with the spanner supplied. 4. Close the holes with the caps supplied.
Installation place requirement

Drain Hose Washer

Laundry Tub approx. 2cm
Level floor : Allowable slope under entire washer is 1. Power outlet : Must be within 60 inches (1.5 m) of either side of the washer. Do not overload the outlet with more than one appliance. Additional Clearance : If the washer is installed inside a closet or alcove, the following clearances are required: 4 inches (10 cm) rear, 1 inch (2.5 cm) side Do not place or store laundry products on top of washer at any times. They can damage the finish or controls.

Electrical connection

1. Do not use an extension cord or double adapter. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. 3. Always unplug the machine and turn off the water supply after use. 4. Connect the machine to an earthed socket in accordance with current wiring regulations. 5. The appliance must be positioned so that the plug is easily accessible. Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point. If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine at room temperature for a few hours before putting it into operation.
Washing Machine is to be connected to the water mains using new hoses Old hoses should not be used. Connecting water supply hose
I Water supply pressure must be between 4.5 ~ 145 PSI (30~1000 kPa) I Dont strip or crossthread when connecting Inlet hose to the valve. I If the water supply pressure is more than 1000 kPa, a pressure reducer device should be installed. Two Sealing washer are supplied with the water inlet hoses to prevent water leaks.

Hose connector Rubber seal Sealing
Check water tightness of washing machine connections by turning the tap completely on. Periodically check the condition of the hose and replace the hose if necessary. Make sure that there is no kink in the hose and that it is not crushed.

washer

Hot water tap Cold water tap

Cold Hot(option)

The Inlet hose which has red connector is for the hot water tap. Hot and cold water faucets Must be installed of your washers water inlet.
This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children
Installation of drain hose

ca. 40"

ca. 57"

max. 50"

ca. 41"

min. 23"

When installing the drain hose at a sink, secure it so it cannot break away, causing flooding and damage. Proper securing the drain hose will protect the floor from damage due to water leakage.

Laundry tub

Hose Retainer Tie strap
max. 40" min. 23"
The drain hose should not be placed higher than 40 above the floor. Proper securing the drain hose will protect the floor from damage due to water leakage.

max. 40"

Level adjustment
1. Leveling a the washing machine properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.
Adjustable feet Higher Lower
2. If the floor is uneven, adjust the adjustable feet as required. (Do not insert pieces of wood, etc. under the feet) Make sure that all four feets are stable and resting on the floor and then check that the appliance is perfectly level. (use a spirit level)

Adjustable feet

Diagonal Check When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all. (Please, check both directions) If machine rocks when pushing the machine top plate diagonally, adjust the feets again.

Softener level

Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes. Do not leave the fabric softener in the detergent drawer for more than 2 days. (Fabric softener could harden) Softener will automatically be added during last rinse cycle. Do not open the drawer when water is supplied. Solvents (benzene, etc.) are not allowable.
Do not pour fabric softener directly on the clothes
Recommended courses according to the laundry type

Fabric Program Type

First check if WASH laundry is machine washable. SANITARY (white cotton, linen WASH/ towel and DRY sheets.)
Proper Maximum Temp. (Wash/Rinse) Load

Option

Time in (Option) Minutes

Drying

HOT/COLD
Wash EXTRA RINSE 15 2/5 lbs. EXTRA WASH (7.0kg)
Wash/Dry EXTRA RINSE 8 4/5 lbs. EXTRA WASH AUTO (TIME) (4.0kg) DRY ONLY
EXTRA RINSE EXTRA WASH EXTRA RINSE EXTRA WASH DRY ONLY EXTRA RINSE EXTRA WASH EXTRA RINSE EXTRA WASH DRY ONLY
Color fast gaments Wash WARM/COLD WASH (Jeans, Tshirts, 15 2/5 lbs. (WARM/WARM, (7.0kg) Shorts, pajamas.) HOT/COLD, COTTON and lightly soiled TAP COLD/COLD, Wash/Dry WASH/ white cotton COLD/COLD) 8 4/5 lbs. DRY (4.0kg) Polyamide, Acrylic, Polyester Wash

AUTO (TIME) _

PERM. PRESS

WASH/ DRY

8 4/5 lbs. WARM/COLD (4.0kg) (WARM/WARM, TAP COLD/COLD, COLD/COLD) _

AUTO (TIME)

RINSE + SPIN
If you wish to rinse _ Wash 15 2/5 lbs. EXTRA RINSE COLD/COLD WASH more, the Extra Rinse function will (7.0kg) (WARM/COLD, remove any trace WARM/WARM, of detergents. TAP COLD/COLD) Wash/Dry EXTRA RINSE AUTO WASH/ 8 4/5 lbs. DRY (4.0kg) DRY ONLY (TIME) Machine washable woolens with pure WASH new wool only COLD/COLD (WARM/COLD, WARM/WARM, TAP COLD/COLD) 42/5 lbs. (2.0kg)

EXTRA RINSE

WOOL / SILK
EXTRA WASH : If the laundry is heavily soiled, EXTRA WASH course is recommended. EXTRA WASH is available in COTTON, SANITARY and PERM. PRESS Program.

H ow to use washer

TIME LEFT 800 400

WASH By pressing the SPIN button, RINSE HOT/COLD the spin rpm can be chosen. SPIN DRY -RINSE HOLD WARM/COLD COLD/COLD - NODOOR LOCK SPIN AUTO DRY TAPSTART/PAUSE COLD/COLD TIME DRY - 400 WASH RINSE+SPIN WOOL/SILK - 800 TEMP. TIME DELAY DRY PERM. PRESS -1000 COTTON -1400 SANITARY

WARM/WARM

WASH RINSE SPIN DRY DOOR LOCK START/PAUSE
AUTO DRY NO SPIN TIME DRY

RINSE HOLD

1. Spin selection
Spin rpm is available according to the program as follows. TIME DELAY
[Wash Programs] - SANITARY & COTTON & RINSE+SPIN 80010001400Rinse HoldNo Spin400 - PERM. PRESS 8001000Rinse HoldNo Spin400 - WOOL/SILK 4008001000Rinse HoldNo Spin [Wash/Dry Programs] - SANITARY & COTTON & RINSE+SPIN 14008001000 - PERM. PRESS 1000 800
1. Wash/Rinse Temperature
Water temperature can be selected as below according to the program. - SANITARY HOT/COLD - COTTON WARM/COLD WARM/WARMHOT/COLD TAP COLD/COLD COLD/COLD - PERM. PRESS WARM/COLDWARM/WARTAP COLD/COLDCOLD/COLD - WOOL/SILK & RINSE+SPIN COLD/COLD WARM/COLD WARM/WARMTAP COLD/COLD Selected temperatures lamp turns on. For the more detailed information, please refer to the page12. Temperature Guide Wash Water Temperature Hot 111 F (44 C) or above Warm 90-110 F (32- 43 C) Cold 70-90 F (21-32 C) Suggested Fabrics Whites and pastels Heavy and greasy soils Bright colors Moderate to light soils Colors that bleed or fade Light soils

2. No spin

If NO SPIN is selected, the washer stops after draining water. The required lamp will light up for identification.

3. Rinse Hold

Is selected by pressing the SPIN button repeatedly this function leaves clothes in the washer; suspended in the water after a rinse without entering into spin.
To proceed through to a drain or spin, once the rinse hold function is completed using to program dial scroll to the required program. (Spin or Pump)
The required lamp will light up for identification.
In wash water temperatures colder than 70 F (21 C), detergents do not dissolve well. Soils may be difficult to remove.

EXTRA RINSE EXTRA WASH

NO SPIN RINSE HOLD

COLD/COLD TAP COLD/COLD

AUTO DRY TIME DRY

DOOR LOCK START/PAUSE

WOOL/SILK

TIME DEALY

ow to use washer
PERM. PRESS COTTON SANITARY

CHILD LOCK

If you choose to lock the buttons on the control assembly to prevent tampering, this function may be selected. TIME DEALY START/PAUSE START/PAUSE

SPIN TIME 1. Child Lock DEALY

1. Time Delay

Preparing washing before starting Time Delay - Turn on the water tap. - Load laundry and close the door. - Place the detergent and fabric softener in the drawer.
Child Lock can be set by pressing andTIME LEFT the holding SPIN button and TIME DELAY button simultaneously.

SPIN TIME DEALY

How to set TIME DELAY - Press POWER button. TIME LEFT - Turn the PROGRAM dial to select When child lock is set, all buttons are inoperable. the program you require. To deactivate Child Lock system, press and hold - Press TIME DELAY button and set the the SPIN and TIME DELAY button desired time. simultaneously again. - Press the START/PAUSE button. SPIN TIME DEALY START/PAUSE START/PAUSE SPIN TIME DEALY (: blinks.)

TIME D

To change to the desired program, whilst in child lock mode. TIME DEALY DEALY SPIN TIME SPIN 1. Press and hold both SPIN and TIME DELAY together once again. TIME LEFT 2. Press the START/PAUSE button. 3. Select the desired program and press the START/PAUSE button again.
If TIME DELAY button is pressed, 3:00 is displayed. The maximum delayed time is 19:00 hours and the minimum time is 3:00 hours.
TIME advances on Each pressing of the button DEALY time delay by one hour.

TIME DEALY D TIME

To cancel the time delay, press the POWER button. TIME DELAY is expected time from the present to the completion of washing cycle START/PAUSE selected process (Wash, Rinse or Spin). or According to the condition of water supply and temperature, the delayed time and the actual washing time may vary.
Change the desired program
The child lock can be set at any time and it is automatically canceled when operational errors occur. Also Child Lock works when power is off.
WASH RINSE HOT/COLD WARM/WARM WARM/COLD COLD/COLD TAP COLD/COLD SPIN DRY

WASH RINSE SPIN

E LEFT

DRY 3. Drying guide

RINSE+SPIN
DOOR LOCK AUTO DRY START/PAUSE TIME DRY

LAY TEMP.

DRY This washer-dryers automatic DOOR process from LOCK washing to drying START/PAUSE WASH RINSE+SPIN can be WOOL/SILK easily. WASH RINSE+SPIN selected PERM. PRESS For mostDRY drying, make sure even PERM. PRESS COTTON all articles in the clothes load are COTTON similar in material and thickness. SANITARY WOOL/SILK

DRY TIME DELAY

Your dryer can handle a load of up to PERM. PRESS COTTON COTTON 84/5 lbs.(4 kg) dry weight of articles. SANITARY

SANITARY WASH/DRY loading, shake out each handful of When WASH/DRY clothes so that they can tumble freely.
Do not overload dryer by stuffing too many articles into drum. Items must be able to tumble freely. If you open door and remove load before dryer has finished its cycle, remember to press the START/PAUSE button.

SANITARY

Items should not be loaded in a tangled condition, as this will lengthen the drying time. Woolen Articles - Do not tumble dry woolen articles. Pull them to their original shape, and dry them flat. Woven and Loopknit Materials - Some woven and loopknit materials may shrink, by varying amounts, depending on their quality. - Always stretch them out immediately after drying. Permanent Press and Synthetics - Do not overload your dryer - Take out permanent press articles an soon as the dryer stops to reduce wrinkles. Fiber or Leather Materials - Always check the manufactures instructions. Baby Clothes and Night Gowns - Always check the manufactures instructions. Rubber and Plastics - Do not dry any items made from or containing rubber or plastics, such as: a) aprons, bibs, chair covers b) curtains and tablecloths c) bathmats Fiberglass - Do not dry fiberglass articles in your dryer. Glass particles left in the dryer could be picked up by your clothes the next time you use the dryer and irritate your skin.

TART/PAUSE

1. Drying Automatic guide
Use your Automatic Cycles to dry most loads. Electronic sensors measure the temperature of the exhaust to increase or decrease drying temperatures for faster reaction time and tigher temperature control. If a load is not as dry as you like, complete drying using a time cycle.
2. Drying Time Guide (Manual Operation)
By pressing the DRY button, the drying time can be selected. These drying times are given as a guide to help you set your dryer for manual drying. Drying times can vary greatly depending on dampness, room temperature and type of fabric and your own experience will be your best guide. AUTO (NORMAL) Cotton 84/5 lbs. (4.0 kg) TIME DRY From 15 min. to 150 min. selectable 15 min. is added by pressing DRY button. 30 min. Cotton 21/5 lbs. (1.0 kg) 60 min. Cotton 43/7 lbs. (2.0 kg) 150 min. Cotton 65/8 lbs. (3.0 kg)
The Estimated drying time varies from the actual drying time with an Automatic. The type of fabric, size of the load, and the dryness selected affect drying time.
NO SPIN EXTRA WASH RINSE HOLD

DOOR L

START/

PROGRAM START/PAUSE

R LOCK

T/PAUSE

1. Start
This START/PAUSE button is used to start wash cycle or pause the wash cycle.
programs are available according to the laundry type. DRY ONLY 400 EXTRA RINSE Lamp will light up to indicate selected NO SPIN RINSE HOLD EXTRA WASH program.

2. Pause

HOT/COLD WARM/WARM
TIME LEFT If temporary stop of wash cycle is SPIN WARM/COLD DRY needed, pressAUTO DRY START/PAUSE LOCK the COLD/COLD DOOR TIME DRY TAP COLD/COLD START/PAUSE button.

WASH RIN

1. Program
When START/PAUSE button is pressed, the Cotton program is automatically selected. - By turning the Program dial, the program SPIN TIME is selected in order of COTTONDELAY PERM. PRESSWOOL/SILK RINSE+SPINRINSE+SPIN PERM. PRESSCOTTON SANITARYSANITARY. [ :WASH/DRY] Regarding to the laundry type for each program Please refer to the page12.
When in Pause, the power is turned off TEMP. TIME DELAY DRY automatically after 4 minutes. NB. The door will not open before 1 to 2 minutes when Pause is selected, or at the end of the wash cycle.

1. Power

Press the Power button to turn power on and off To cancel the TIME DELAY function, the Power button should be pressed.

2. Course

[WASH] -RINSE+SPIN -WOOL/SILK -PERM. PRESS -COTTON -SANITARY [WASH/DRY] -RINSE+SPIN -PERM. PRESS -COTTON -SANITARY

2. Initial Program

When the Power button is pressed, the washer is ready for Cotton program. If you want to advance into the washing cycle without changing the program, just press START/PAUSE button and then the washer will proceed. Initial program - Cotton Program, Main wash, Normal Rinse, 800rpm, Warm/Cold

DISPLAY

WASH HOT/COLD WARM/WARM WARM/COLD COLD/COLD TAP COLD/COLD AUTO DRY

3. Completion of washing

RINSE SPIN DRY
When washing cycle is completed, is displayed on the Multi DOOR LOCK display.
TIME DRY 1. Special function display
When child lockTIME DELAY the is selected, TEMP. is displayed.

4. Time left WOOL/SILK

When time delay is selected, it shows the remaining times to finish the selected program.
During washing cycle, the remaining COTTON washing time is displayed. SANITARY Recommended program by manufacturer. [WASH] - SANITARY : Approx. 1 hour and 37 minutes - COTTON : Approx. 1 hour and 22 minutes - PERM. PRESS : Approx. 1 hour and 17 minutes - WOOL/SILK : Approx. 56 minutes - RINSE+SPIN : Approx. 32 minutes [WASH/DRY] - SANITARY : Approx. 4 hours and 46 minutes - COTTON : Approx. 4 hours and 31 minutes - PERM. PRESS : Approx. 4 hours and 25 minutes - RINSE+SPIN : Approx. 3 hours and 41 minutes The washing time may vary by the amount of laundry, water pressure, water temperature and other washing conditions. If an unbalanced load is detected or if the suds removing program operates, the wash time may be extended. (Max. increasing time is 45minutes.) 19

Remove hard water deposits using only cleaners labeled as washer safe.

Cold condition

If the washer is stored in an area where freezing may occur or moved in freezing temperatures, follow these instructions to prevent damage to the washer: 1. Turn off water supply tap. 2. Disconnect hoses from water supply and drain water from hoses. 3. Plug electrical cord into a properly grounded electrical outlet. 4. Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into an empty wash drum. Close the door. 5. Set spin cycle and let washer spin for 1minute to drain out all water. Not all of the RV antifreeze will be expelled. 6. Unplug electrical power cord, dry the drum interior, and close the door. 7. Remove dispenser drawer, drain and dry excessive water from the compartments. 8. Store washer in an upright position. 9. To remove antifreeze from washer after storage, run empty washer through a complete cycle using detergent. Do not add wash load.

roubleshooting guide

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately. When the machine does not function properly or does not function at all, check the following points before you contact your service provider.

Symptom

Rattling and clanking noise

Possible Cause

Foreign objects such as coins or safety pins maybe in drum or pump.

Solution

Stop washer and check drum and drain filter. If noise continues after washer is restarted, call your authorized service centre. If sound continues, washer is probably out of balance. Stop and redistribute wash load. If not removed during installation, refer to Installation guide for removing transit bolts. Wash load may be unevenly distributed in drum. Stop washer and rearrange wash load. Check and tighten hose connections. Unclog drain pipe. Contact plumber if necessary. Too much detergent or unsuitable detergent may cause excessive foaming which may result in water leaks.

Thumping sound

Heavy wash loads may produce a thumping sound. This is usually normal. Have all the transit bolts and packing been removed? Are all the feet resting firmly on the ground?

Vibrating noise

Water leaks.
Fill hoses or drain hose are loose at tap or washer. House drain pipes are clogged.

Oversudsing

Unplug the power plug and call for service. Water overfills due to the faulty water valve. Water level sensor has malfunctioned.
Close the water tap. Unplug the power plug. Call for service.

Over load in motor.

Check water supply.
Turn the tap on. If is not released, unplug power plug and call for service.

W arranty

Visit our web site at http://www.lgservice.com LG Electronics

LIMITED WARRANTY

United States of America
LG Electronics will repair or at its option replace, without charge, your product which proves to be defective in material or workmanship under normal use during the warranty period listed below from the date of original purchase. This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S including Alaska, Hawaii, and U.S. Territories, and all Canadian Provinces. LG Washing Machine Warranty Period Product All Parts Drum Tub, Motor Parts 1 Years 7 Years Labor 1 Years (In-Home Service) 1 Years (In-Home Service)
No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED WARRANTIES. INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG ELECTRONICS SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVIENCE, LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY APPLICABLE TO THIS PRODUCT. Some States / Provinces do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province. THE ABOVE WARRANTY DOES NOT APPLY TO: 1. Service trips to your home to deliver and pickup, install, instruct, or replace house fuses or correct house wiring or plumbing, or correction of unauthorized repairs. 2. Damage to the product caused by accident, vermin, fire, floods, or acts of God. 3. Repairs when your LG product is used in other than normal, single-family household use. 4. Damage resulting from accident, alteration, misuse, abuse, or improper installation. Therefore, these costs are paid by the consumer. If the product is installed outside the normal service area, any cost of transportation involved in the repair of the product, or the replacement of defective parts, shall be borne by the owner. CUSTOMER ASSISTANCE NUMBERS: To obtain Warranty Coverage: Retain your Bill of Sales to prove date of purchase. A Copy of your Sales Receipt must be submitted at the time warranty service is provided. Call 1-800-243-0000 (Mon. ~ Fri. 7 AM ~ 8 PM CT)(Sat. 8AM ~ 5PM CT) Press the appropriate menu option, and have your product type (Washer,) model number, serial number, and ZIP/Postal Code ready. Call 1-800-243-0000 (24 hrs a day, 7 days per week) Press the appropriate option, and have your product type (Washer,) model number, serial number, and ZIP/Postal Code ready.

To obtain Product or Customer Service Assistance: To obtain the nearest Authorized Service Center:

P/No.: 3828ER3014K