FY2010 COUNTYWIDE RESURFACING ROADWAY IMPROVEMENT-LEHIGH ACRES # 23 Street 55TH ST SW 53RD ST SW BETH AVE S CONNIE AVE S 42ND ST SW 38TH ST SW 26TH ST SW 22ND ST SW 18TH ST SW 19TH ST SW 18TH ST SW 15TH ST SW 18TH ST SW HANK AVE S 20TH ST SW 22ND ST SW 32ND ST SW EARL AVE S ERIC AVE S DONALD AVE S 35TH ST SW 34TH ST SW 9TH ST W From Alabama Rd S Alabama Rd S 48th St SW 48th St SW Connie Ave S Connie Ave S Unice Ave S Ruth Ave S Yvonne Ave S Curtis Ave S Bruce Ave S Yvonne Ave S Curtis Ave S 19th St SW Floyd Ave S Floyd Ave S Eddie Ave S 32nd St SW 32nd St SW 32nd St SW Eric Ave S Eddie Ave S Joan Ave N To W-EOP W-EOP N-EOP N-EOP E-EOP E-EOP E-EOP W-EOP E-EOP Douglas Ave S E-EOP E-EOP E-EOP 15th St SW E-EOP E-EOP W-EOP N-EOP N-EOP N-EOP E-EOP W-EOP W-EOP D-2b 26 YVONNE AVE N 15TH ST W CARLTON AVE N 9th St W Colin Ave N Churchill Ave N S-EOP Denis Ave N Crawford Ave N 135 Lg 850 Wd 18 Tons 128
FY2010 COUNTYWIDE RESURFACING ROADWAY IMPROVEMENT-LEHIGH ACRES # Street 31ST W GENE AVE N FLORA AVE N 41ST ST W 47TH ST W 48TH ST W JUNE AVE N JOAN AVE N NORA AVE N 48TH ST W OLIVE AVE N OLIVE AVE N 49TH ST SW 48TH ST W SARA AVE N 58TH ST W 56TH ST W 64TH ST W 65TH ST W 70TH ST W From Ida Ave N 32nd St W 32nd St W Ida Ave N Joan Ave N Joan Ave N 51th St W 51th St W 49th St W Olive Ave 49th St W 51st St W Olive Ave N (W) Sara Ave N 51st St W Gene Ave N Olive Ave N Joan Ave N Joan Ave N Unice Ave N To Joan Ave N S-EOP S-EOP E-EOP E/W-EOP June Ave N 47th St W 47th St W 48th St W Nora Ave N 48th St W 49th St W Nora Ave N Terry Ave N 48th St W E-EOP E-EOP W-EOP W-EOP E_EOP D-2c LEROY AVE NORTH AVE BRENDA AVE S BARCELONA ST E BELMONT ST E CHRYSLER ST E E 6th St E 5th ST Anthony St E Andalucia Ave S Grant Blvd Lamella Ave S N-EOP S-EOP Sentinela Blvd Clemson Ave S Clemson Ave S Naples Ave S Lg Wd Tons 135 98
FY2010 COUNTYWIDE RESURFACING ROADWAY IMPROVEMENT-LEHIGH ACRES # 69 Street LAMELLA AVE S CLOPON ST E CORDOBA ST E CRAFT ST E HULL AVE S GREEN ST E LABREE AVE S LANCELOT AVE S SANTA LUCIA AVE S GALILEO ST E GARIBALDI ST E COUNTESS AVE COUNTESS AVE AMES ST E FULLERTON AVE S RANIER AVE REDWING ST From Claremont St E Lamella Ave S Lamella Ave S Genoa Ave S Grant Blvd Putman Ave Calmet St E Calmet St E Galileo St E Columbus Blvd Columbus Blvd Nimitz Blvd Meadow Rd Homestead Rd S Addison St E Grant Blvd Ranier Ave To Cordoba St E Naples Ave S Naples Ave S Ladle Ave S Green St E Hull Ave S N-EOP Cadis St E Jaguar Blvd Santa Lucia Ave S Santa Lucia Ave S Plantation Rd Shallowford Troy Ave S Raintree St E Redwing St Rawlings Ave D-2d RANCHO AVE RAWLINGS AVE RAYFORD ST PADDOCK ST RANCH AVE RAYMER ST Redwing St Redwing St Ranch Ave Ranch Ave Redwing St Redwing St Raymer St Paddock St Rawlings Ave Rawlings Ave Paddock St Rawlings Ave 150 11670.5 Lg 1400 Wd 18 Tons 142.210

ESTIMATED TOTALS

P/No.: 3828ER3022W

Washing Machine

OWNERS MANUAL
WD-8025(0~9)S WD-8025(0~9)N WD-8025(0~9)T WD-80100TP LWD-80250TP
Thank you for buying a LG Fully Automatic Washing machine. Please read your owner's manual carefully, it provides instructions on safe installation, use and maintenance. Retain it for future reference. Record the model and serial numbers of your washing machine.

roduct Feature

Protection against wrinkles
With the alternate rotation of the drum, wrinkling in the laundry is minimized.
More economical by Intelligent Wash System
Intelligent Wash System detects the amount of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.

Child-Lock

Option Option Temp. Temp.
The Child-Lock system has been used to prevent children from pressing any button to change the program during operation. The power button will always remain operative whilst Child-Lock is activated.
Low noise speed control system
By sensing the amount of load and balance, it evenly distributes load to minimize the spinning noise level.

ontents

Warnings...3 Specification...4 Installation....5 Care before washing...11 Adding detergent...12 Function...13 How to use washer...14 Maintenance...21 Troubleshooting guide...24 Terms of Warranty..27

W arnings

READ ALL INSTRUCTIONS BEFORE USE

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury to persons when using
the washer, follow basic precautions, including the following: Do not install or store the washer where it will be exposed to the weather. Do not tamper with controls. Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out. Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc. Close supervision is necessary if this appliance is used by or near children. Do not allow children to play on, with, or inside this or any other appliance. Do not leave the washer door open. An open door could entice children to hang on the door or crawl inside the washer. Never reach into washer while it is moving. Wait until the drum has completely stopped. The laundry process can reduce the flame retardant of fabrics. Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may ignite or explode. To avoid such a result, carefully follow the garment manufacturers wash and care instructions. Do not slam the washer door closed or try to force the door open when locked. This could result in damage to the washer. To minimize the possibility of electric shock, unplug this appliance from the power supply or disconnect the washer at the household distribution panel by removing the fuse or switching off the circuit breaker before attempting any maintenance or cleaning. Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance. Do not use an adapter or otherwise defeat the grounding plug. If you dont have the proper outlet, consult an electrician.

WARNING

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.

pecification

WD-8025(0~9)S Name Power supply Size Weight / Max. Watt Wash capacity Water consumption Permissible water Pressure Spin Speed

WD-8025(0~9)N

WD-8025(0~9)T WD-80100TP/LWD-80250TP
Front loading washing machine 220-240V~ , 50Hz 600mm(W) 360mm(D) 850mm(H) 600mm(W) 440mm(D) 850mm(H) 600mm(W) 550mm(D) 850mm(H) 52kg / 2100W 3.5kg 42 l 57kg / 2100W 5kg 60 l 0.3 - 10kgf/cm2 (30~1000kPa) Rinse Hold / No Spin / 400 / 800 64kg / 2100W 6kg 72 l
The appearance and specifications may be varied without notice to raise the units quality.

I Accessories

Spanner

nstallation

Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times. Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance guarantee.

Transit bolts

The appliance is fitted with transit bolts to prevent internal damage during transport. Packing and all transit bolts must be removed before using the washer. When unpacking the base, be sure to remove the additional packing support in the middle of the base packing.

BS Plug Safety Details (For U.K. User)

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH BLUE: NEUTRAL BROWN: LIVE
This appliance must be earthed
Green and Yellow(Earth) Brown(Live) Blue(Neutral)

Fuse Cord grip

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured Green or Green and Yellow. The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red. If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.

I Electrical connection

1. Do not use an extension cord or double adapter. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. 3. Always unplug the machine and turn off the water supply after use. 4. Connect the machine to an earthed socket in accordance with current wiring regulations. 5. The appliance must be positioned so that the plug is easily accessible. Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service center Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point. If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine at room temperature for a few hours before putting it into operation.

I Washing Machine is to be connected to the water mains using new hosesets and that old hose-sets should not be used. I Connecting water supply hose
Water supply pressure must be between 30kPa and 1000kPa (0.3~10kgf/cm2) Dont strip or crossthread when connecting Inlet hose to the valve. If the water supply pressure is more than 1000kPa, a decompression device should be installed. Two rubber seals are supplied with the water inlet hoses these are in order to prevent water leaks. Check water tightness of washing machine connections by turning the tap completely on. Periodically check the condition of the hose and replace the hose if necessary.
Hot water tap Cold water tap
Make sure that there is no kink on the hose and that it is not crushed. When your washer has two valves, The Inlet hose which has red connector is for the hot water tap. If the washer has two valves, the energy is saved by using hot valve.

Cold Hot(option)

Normal Tap without thread & screw type inlet hose
1. Unscrew the fixing screw to

attach the tap.

2. Push the connector up till the
rubber packing is in tight contact with the tap. Then tighten the 4 screws.
3. Push the water supply hose
vertically upwards so that the rubber packing within in the hose can adhere completely to the tap and then tighten it by screwing it to the right.
Normal Tap without thread & one touch type inlet hose (Single inlet models)
1. Untighten the upper connector

screw.

2. Push the upper connector up till 3. Connect the water supply hose
the rubber packing is in tight contact with the tap. Then tighten the 4 screws. to the middle connector, pushing the plate down.
In case the diameter of the tap is large remove the guide plate. Turn the middle connector not to have water leaked. Make sure that the rubber seal is inside the hose connector. To separate the water supply hose from the middle connector shut off the tap. Then pull the inlet hose down, pushing the plate down.
Your machine comes with only cold water connection. Make sure that there are no kinks in the hose and that it is not crushed.
This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation ! Keep all packaging well away from children
Installation of drain hose

ca. 100 cm

ca. 145 cm

ca. 105 cm

When installing the drain hose sink, secure it tightly with a string. Proper securing of the drain hose will protect the floor from damage due to water leakage.

max. 100 cm

min. 60 cm

Laundry tub

Hose Retainer Tie strap

max. 100cm min. 60cm

The drain hose should not be placed higher than 100 cm above the floor. Proper securing of the drain hose will protect the floor from damage due to water leakage. When the drain hose is too long, do not force back into the washer. This will cause abnormal noise.

Level adjustment

1. Adjusting the washing machine level properly prevents excessive noise and vibration. Install the appliance on a solid and level floor surface, preferably in a corner of the room.
Timber or suspended type flooring may contribute to excessive vibration or load balance errors.
Lock nut Adjustable feet Higher Lower
2. If the floor is uneven, adjust the adjustable feet as required. (do not insert pieces of wood etc. under the feet) Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. (use a spirit level) After the washer is level, tighten the lock nuts up towards of the base of the washer. All lock nuts must be tightened. Diagonal Check When pushing down the edges of the washing machine top plate diagonally, the machine should not move up and down at all. (Please, check both of two directions) If machine rocks when pushing the machine top plate diagonally, adjust the feet again.

Adjustable feet

Concrete floors(tile.)
The installation surface must be clean, dry and level. Install washer on a flat hard floor. Before placing the washer on tiles, apply a rubber mat under the feet. Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.

Wooden floors

Rubber Cup
Wooden floors are particularly susceptible to vibration. To prevent vibration we recommend you place rubber cups under each foot, at least 15mm thick under the washer, secured to at least 2 floor beams with screws. If possible install the washer in one of the corners of the room, where the floor is more stable. Insert the rubber cups to reduce vibration. You can obtain the rubber cups (p/no.4620ER3001B) from the LG spares dept.
Important! Proper placement and levelling of the washer ensure long,regular and reliable operation. The washer must be absolutely horizontal and stand firmly in position. It must not Seesaw across corners under load. The installation surface must be clean, free from floor wax and other lubricant coatings.

are before washing

Caring before washing
1. Care Labels Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should be washed. 2. Sorting To get the best results, Sort clothes into loads that can be washed with the same wash cycle. Water temperature and spin speed and different fabrics need to be washed in different ways. Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing discoloration of white etc. If possible, do not wash heavily soiled items with lightly soiled one. Soil (Heavy, Normal, Light) Color (White, Lights, Darks) Lint (Lint producers, Collectors) Separate clothes according to amount of soil. Separate white fabrics from colored fabrics. Wash lint producers and lint collectors separately.

3. Caring before loading

Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
Check all pockets to make sure that they are empty. Items such as nails, hair clip, matches, pens, coins and keys can damage both your washer and your clothes. Close zippers, hooks and strings to make sure that these items dont snag on other clothes.
Pre treat dirt and stains by brushing a little detergent dissolved in water onto stains like collars and cuffs to help shift dirt.

A dding detergent

Adding detergent and fabric softener
1. The Dispenser Drawer 3. Detergent dosage
The detergent should be used according to the instruction of the detergent manufacture.
If too much detergent is used more than the recommended amount, too many suds can occur and this will decrease the washing result or cause heavy load to the motor. (Causing a malfunction) Use powder detergent only for the front loading washer.
Main wash only Pre Wash + Main Wash
2. Adding Fabric Softener
Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. For best results, avoid oversudsing. Tips Full load : according to manufacturers recommendation. Part load : 3/4 of the normal amount. Minimum load : 1/2 of full load. Detergent is flushed from the dispenser at the beginning of the cycle.

125 ml

Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes. Do not leave the fabric softener in the detergent drawer for more than 2 days. (Fabric softener could harden) Softener will automatically be added during the last rinse cycle. Do not open the drawer when water is supplied. Solvents(benzene, etc) are not allowable.
Do not pour fabric softener directly on the clothes

unction

Recommended courses according to the laundry type
Fabric Program Type Temp. Proper Option Load
WD-8025(0~9)T WD-8025(0~9)S WD-8025(0~9)N WD-80100TP LWD-80250TP

Maximum

Cotton
First check if laundry is machine washable. (white cotton, linen towel and sheets.)

Pre Wash Rinse+

Rating
Color fast gaments (shirts, night dresses, 60C Pre Wash pajamas.)and lightly (40C,Cold ) Rinse+ soiled white cotton(underwear.) Synthetic Polyamide, Acryic, Polyester 40C Pre Wash (60C, Cold) Rinse+
Less than Less than 1.7 kg 2.5 kg

Less than 3.0 kg

Delicate
Delicate laundry easily damaged (silk, curtains.)

Cold (40C) Cold (40C)

Rinse+
Less than Less than 1.0 kg 1.7 kg

Less than 2.0 kg

Quick 30 Colored Laundry which is lightly soiled fast.
Less than Less than 1.0 kg 1.5 kg

Less than 2.0kg

Pre Wash : If the laundry is heavily soiled, Pre Wash Cotton is recommended. Pre Wash is available in Cotton and Synthetic Program. Rinse+: Used to introduce an additional rinse, which may assist in removing traces of detergent residue.

H ow to use washer

Synthetic Delicate Quick 30

Rinse+ No Spin

Rinse+Spin

Pre Wash

Rinse Hold

Program

Start/Pause

Option

1. Cotton automatically selected upon power on.
Press the Power( ) button to start. ) button.

2. Manual Selecting

Press the Power(

) button to start.

Press the Start/Pause( Initial condition - Wash : main wash - Rinse : 3 times - Spin : 800 rpm - Water temperature : 60C - Program : Cotton

Select the conditions which you want to use, by pressing each button. For selecting the each conditions, please refer to the page15~page20 Press the Start/Pause( ) button.
(1) Button : Program (2) Button : Start/Pause (3) Button : Option
(4) Button : Temperature (5) Button : Spin (6) Child Lock

(7) Button : Power

By pressing the Option button, all Option functions may be selected. - Rinse + Cold - Pre Wash

n Pre Wash

1. Rinse+
Used to additional rinse, which may assist in removing traces of detergent residue. By selecting Rinse+ function, the rinse time
Cotton Rinse+Spin Synthetic Delicate Quick 30

2. Pre Wash

If the laundry is heavily soiled, Pre Wash course is effective. Pre Wash is available in Cotton and Synthetic.
and the rinse water are increased. Program
Do not use Pre Wash stain removers on or near the Washer, as they may cause damage to the control panels finish.

Quick 30

Water Temp.
By pressing the Temp. button, the water temperature can be selected. - Cold - 40C / 60C / 95C

30 icate

No spin
By pressing the Spin button,+ the spin speed Rinse Rinse+ can be chosen.
No spin Pre Wash Rinse hold Cold Pre Wash Cold

Rinse+Spin hold Rinse

Option Spin

Temp. Option

1. Spin selection

1. Water Temperature

Delicate Quick 30 Synthetic Delicate Quick 30
Spin speed is available according to the program as follows.

Cotton Rinse+Spin Cotton

Synthetic
Water temperature can be selected as below according to the program.
- Cotton/Synthetic/Delicate/Quick 30 Option Temp. Program /Rinse+Spin Program Rinse Hold - No Spin - 400 - 800
Synthetic Delicate Quick 30 Synthetic Delicate Cotton Rinse+Spin Cotton
- Cotton Cold - 40C - 60C - 95C - Synthetic Cold - 40C - 60C - Delicate & Quick 30 Cold - 40C

2. No spin

Option Temp.
If no spin is selected, the washer stops Program after draining water. The required lamp will light up for identification.
Temp. Start/Pause Option Temp. Start/Pause Start/Pause
The required temperature lamp will light up for identification.
For the more detailed information, please refer to the page13.

3. Rinse Hold

Is selected by pressing the spin button repeatedly this function leaves clothes in the Start/Pause machine; suspended in the water after a rinse without entering into spin. To proceed through to a drain or spin, once the rinse hold function is completed using to Program button and Spin button to the required program. The required lamp will light up for identification.

Quick 30 Rinse+Spin

No spin Rinse hold No spin Rinse hold Pre Wash Cold Pre Wash Rinse+ Cold

ow to use washer

Cotton Rinse+Spin

Synthetic Delicate

Spin Child Lock Quick 30

Spin 1. Child Lock

Rinse Option
Child Lock can be set by Pre Wash pressing and Rinse hold holding the the Option and the Temp. button simultaneously.
Synthetic Delicate Quick 30 Cotton Rinse+Spin Synthetic
Program If you choose to lock the buttons on the control Option Option Temp. assembly to prevent tampering this function may be selected.

Start/Pause Power

OptionDelicate
Quick 30 Synthetic Delicate Program If the Program lamps are blinked (All program lamps blink) simultaneously after the power off or the end Rinse+ Start/Pause Option Temp. Option of the washing, the child lock Temp. Power mode is set. When child lock is set, all buttons are inoperable No spin Cancel the child lock mode by pressing the Rinse+Spin Cotton except power button. Program Cold Pre Wash Rinse hold Temp. and the Option button simultaneously To deactivate Child Lock system, press the Option Option Temp. Temp. for 3 seconds.
Cotton Rinse+Spin Synthetic Synthetic Delicate Delicate Quick Quick 3030 Cotton Cotton Rinse+Spin Rinse+Spin

Start/Pause Power Option

Option and the Temp. button simultaneously Program Program again.

Spin Option Temp.

Start/Pause30 Quick Delicate
Option Temp.Temp.Start/Pause Option
Start/Pause To change to the desired program, whilst Option Temp. in child lock mode. Program 1. Press both the Option and the Temp. Start/Pause Start/Pause Start/Pause Option Temp. together once again. 2. Press the Start/Pause button. 3. Select the desired program and press Option Temp. the Start/Pause buttonProgram again.
Cotton Rinse+Spin Synthetic Delicate Quick 30 Cotton Rinse+Spin
Change the desired program
The child lock can be set at any time and it is automatically canceled when operational errors occur. Also Child Lock works when Start/Pause power is off.
5 programs are available according to the laundry type. Lamp will light up to indicate selected program.

1. Program

When Start/Pause button is pressed, the Cotton program is automatically selected. - By turning the Program dial, the program is selected in order of Cotton-SyntheticDelicate-Quick 30-Rinse+Spin. Regarding to the laundry type for each program Please refer to the page13.

Cold condition

If the washer is stored in an area where freezing may occur or moved in freezing temperatures, follow these instructions to prevent damage to the washer: 1. Turn off water supply tap. 2. Disconnect hoses from water supply and drain water from hoses. 3. Plug electrical cord into a properly grounded electrical outlet. 4. Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into an empty wash drum. Close the door. 5. Set spin cycle and let washer spin for 1minute to drain out all water. Not all of the RV antifreeze will be expelled. 6. Unplug electrical power cord, dry the drum interior, and close the door. 7. Remove dispenser drawer drain and dry excessive water from the compartments. 8. Store washer in an uprignt position. 9. To remove antifreeze from washer after storage, run empty washer through a complete cycle using detergent. Do not add wash load.

roubleshooting guide

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately When the machine does not function properly or does not function at all, check the following points before you contact your service provider.

Symptom

Rattling and clanking noise

Possible Cause

Foreign objects such as coins or safety pins maybe in drum or pump.

Solution

Stop washer and check drum and drain filter. If noise continues after washer is restarted, call your authorised service centre. If sound continues, washer is probably out of balance. Stop and redistribute wash load. If not removed during installation. Refer to Installation guide for removing transit bolts. Wash load may be unevenly distributed in drum. Stop washer and rearrange wash load. Check and tighten hose connections. Unclog drain pipe. Contact plumber if necessary. Too much detergent or unsuitable detergent may cause excessive foaming which may result in water leaks.

Thumping sound

Heavy wash loads may produce a thumping sound. This is usually normal. Have all the transit bolts and packing been removed? Are all the feet resting firmly on the ground?

Vibrating noise

Water leaks.
Fill hoses or drain hose are loose at tap or washer. House drain pipes are clogged.

Oversudsing

Water does not enter washer or it enters slowly
Water supply is not adequate in area. Water supply tap is not completely open. Water inlet hose(s) are kinked. The filter of the inlet hose(s) clogged.
Check another tap in the house. Fully open tap. Straighten hose. Check the filter of the inlet hose. Clean and straighten the drain hose. Clean the drain filter
Water in the washer does not drain or drains slowly.
Drain hose is kinked or clogged. The drain filter is clogged.

Symptom Possible Cause

Electrical power cord may not be plugged in or connection may be loose. House fuse blown, circuit breaker tripped,or a power outage has occurred. Water supply tap is not turned on.

Make sure plug fits tightly in wall outlet. Reset circuit breaker or replace fuse. Do not increase fuse capacity. If problem is a circuit overload, have it corrected by a qualified electrician. Turn on water supply tap.

Washer does not start

Washer will not spin
Check that the door is firmly shut.
Close the door and press the Start/Pause button. After pressing the Start/Pause button, it may take a few moments before the clothes washer begins to spin. The door must lock before spin can be achieved. Once started, the door can not be opened for safety reasons. Wait one or two minutes before opening the door to give the electric locking mechanism time to release.

Door does not open

Wash cycle time delayed
The washing time may vary by the amount of laundry, water pressure, water temperature and other usage conditions. If the imbalance is detected or if the suds removing program works, the wash time shall be increased.
Water supply is not adequate in area Water supply taps are not completely open. Water inlet hose(s) are kinked. The filter of the inlet hose(s) are clogged. Drain hose is kinked or clogged. The drain filter is clogged.

No Spin

Rinse Wash Pre Rinse+
Check another tap in the house. Fully open tap. Straighten hose(s). Check the filter of the inlet hose. Clean and straighten the drain hose. Clean the drain filter.

Rinse+ +

Pre Wash Pre Wash Pre Wash
No Spin Rinse Hold No Spin Rinse+
Rinse Hold Rinse Hold No Spin Hold Rinse Pre Wash Rinse+
Load is too small. Load is out of balance. + Rinse+Wash Rinse Rinse Hold Pre The appliance has an imbalance + Rinse No Spin detection and correction system. If No Spin + Spin RinseNo No Spin Rinse Holdindividual heavy articles are loaded Pre Wash Rinse Hold Pre Wash Rinse Hold No Spin (ex. bath mat, both robe, etc.) this system Rinse Hold Pre Wash Rinse+ may stop spinning or even interrupt the Rinse Hold Pre Wash + Rinse spin No Spin cycle altogether. Rinse+ No SpinIf the laundry is still too wet at the end of No Spin Rinse Hold Rinse+ Pre Wash the Rinse+Wash Cold Rinse Hold cycle, add smaller articles of laundry Pre Rinse Hold Pre Wash toNo Spin balance the load and repeat the spin Rinse+ No Spin Rinse+ cycle. Cold Rinse Hold Pre Wash
Add 1 or 2 similar items to help balance the load. Rearrange load to allow proper spinning
No Rinse Hold Spin No Spin

Pre Rinse+ Wash

No Spin Rinse Hold

Is the door opened?

Close the door. If door error is not released, call for service.

Cold Cold

Unplug the power plug and call for service.

Cold Cold Cold

No Spin Cold
Rinse Hold No Spin No Spin Cold
Water overfills due to the faulty water valve.
Close the water tap. Unplug the power plug. Call for service.

Rinse Spin No Hold

Water level sensor has malfunctioned.
Cold Rinse Hold Rinse Hold + RinseCold

Rinse+Wash Pre

Pre Wash 26

Pre Wash Cold Cold

Rinse+ Pre Wash + Rinse

erms of Warranty

What Is Not Covered:
Service trips to your home to teach you how to use the product. If the product is connected to any voltage other than that shown on the rating plate. If the fault is caused by accident, neglect, misuse or Act of God. If the fault is caused by factors other than normal domestic use or use in accordance with the owner's manual. Provide instruction on use of product or change the set-up of the product. If the fault is caused by pests for example, rats or cockroaches etc. Noise or vibration that is considered normal for example water drain sound, spin sound, or warming beeps. Correcting the installation for example, levelling the product, adjustment of drain. Normal maintenance which recommended by the owner's manual. Removal of foreign objects / substances from the machine, including the pump and inlet hose filter for example, grit, nails, bra wires, buttons etc. Replace fuses in or correct house wiring or correct house plumbing. Correction of unauthorized repairs. Incidental or consequential damage to personal property caused by possible defects with this appliance. If this product is used for commercial purpose, it is not warranted. (Example : Public places such as public bathroom, lodging house, training center, dormitory) If the product is installed outside the normal service area, any cost of transportation involved in the repair of the product, or the replacement of a defective part, shall be borne by the owner.