www.waferstar.com

WF-402 Coin Operated Timer Control Box Manual
1 WF-402 timer control box
WF-402 is used to do USB cable timer control. And that is widely used for the simple kiosk computer control, game machine and so on. And that is very easy to change a normal electric equipment to a coin operated electric equipment.

Simple connectors:

On the back side of WF-402 box,there are two USB input port, normally,that is used to connect to the USB input device ,for samples,that is USB mouse and USB keyboard , or USB joystick and so on. And WF-402 also has double USB output cable,that is used to connect to the PC USB port. WF-402 has one power connector,that is used to connect to the Computer inside Power plug. That is used to supply the power for the whole WF-402 box. Inside of the WF-402,that main control board is WF-500USB. The following is some technical data of WF-500USB board.
2 WF-500USB timer control board
3WF-500USB timer control board technical Specification
Power Input: +12VDC ; Output Relay Power Maximum: 250VAC 5A / 30VDC 5A or 250V 30A / 30VDC 30A (Optional) ; Board Size: 93mm * 52mm ; Digital Timer: Four bits LED Timer ; Maximum timer: 999 minutes ; Maximum coin pulse preset: 30 pulses ; Timer value saved when power off ; Timer credit and pulse can preset by the P1 and P2 push button.

4How to setup

There are two Button on the control board: P1 and P2. We can use the P1 setup button to preset the timer value per coin pulse. After release the setup button at 3 seconds,then control board will auto-save the preset value. And we can use the P2 button to setup the minimum coin pulse (from 1 to 30 ) to run the timer.
5Connectors and Input Wires
1Input wires from pulse type coin acceptor Three pin connector with : Red wire, Black wire and White wire and that is specified as following : Red To power supply : +12V Black To power supply: GND White Coin pulse input (Connect the coin pulse output (NO Type Output) line from coin acceptor If have other wires from coin acceptor, normally that no need to connect If the board have the save function,then will have another reset wire,that is used to reset the timer value. 2USB port: WF-500USB has double USB control channels, that can control double USB input and output device. For example ,we can use it to control the USB keyboard and USB mouse.

32 WF 402 G

32" 16/9 XF 100 Hz High Focus

FEATURES

X-Flat Tube - TF Contour

BENEFITS

For the best picture quality, incomparable comfort of vision and perfectly flat outlook A new dynamic 100 Hz for a high picture quality whatever the source is Powerfull sound to make the most from your movies

100Hz High Focus

2 x 20 W Music Power

Auto-format

Enjoy widescreen picture whatever the source is (4/3 or Cinemascope) Allows you to use 3 devices at the same time (VCR, DVD,..) Allows you to connect two devices at the same time (VCR, DVD,.)
3 in 1 (TV-DVD-VCR) muti - brand product remote control

Scarts x 2

Technical Data :
BRAND Brand PICTURE Screen size : diagonale (cm / inch) Visible screen size : diagonale (cm / in Category Tube Type Tube Mask Frequency Picture Noise Reduction Picture Contrast Contrast optimisation Format control Zoom transition 16/9 autoformat (black bars canceller) Picture enhancement Picture enhancement Zoom type Zoom type (2) Zoom type (3) Multipicture Picture presets Picture presets (2) Picture presets (3) SOUND Sound type Music Power (Watt) Loudspeakers built in (T/M/B) Loudspeakers surround (T/M/B) Dolby system Wireless surround channel Special sound effects Loud speaker technology Sound presets details Sound presets details (2) Sound presets details (3) Tone control Vol control headphones RECEPTION Reception Norm Video standard (PAL / SECAM) Video standard NTSC Video standard Program number Tuner synthesis USER CONVENIENCE Sleep / wake-up timer Parental Feature Program auto switch off On screen menu Menu languages Menu languages (2) Number of buttons on TV Installation Remote Control Wireless keyboard (for TAK) Hotel mode Remote control ref 12 - 24 V SERVICES TV Guide Easy video recording Teletext type Pages for teletext TAK REAR CONNECTORS Antenna Scart 1 Scart 2 Scart 3 CINCH audio in / out CINCH video in / out S-video in / out External Loudspeaker Telephone socket for TAK 1 CVBS / RGB CVBS / S-VIDEO Program Info 1.5 / Fastext / TOP 128 Yes / Yes Child Lock Yes Navilight F/D/I/GB/E/S/NL/P/DK/N/PL/H RU/CZ 4 AI+ (Auto-naming + auto sorting) 3 in 1 multi brand product RCT311TAM1 Pan European (LL'/BG/I/DKK') Yes / Yes NTSC 3.58 / 4.43 (AV) Pal 60Hz (AV) 99 + 3 PLL Stereo Nicam 2 x 20 0/2/0 Spatial / pseudo Standard My sound / music Film / voice / flat / standard Graphic Equalizer Linked 81 / / 30 16/9 Extra-Flat Invar 100Hz High Focus Motion adaptive PSI Yes Fast Yes Earth field BSVM 4/3 + 16/9 letterbox 16/9 Lbx subtittle + cinerama My picture / studio Film / sport / standard THOMSON
VGA mode Hotel connectors FRONT CONNECTORS CINCH in S-video in Headphone connector (mm) DESIGN Color Clip'on frame color GENERAL DATA EAN code Chassis Power supply Size (W x H x D) in mm Packaging size (W x H x D) in mm Weight : Net / Gross in kg Instruction booklet languages (1) Instruction booklet languages (2) Power consumption working / standby OPTIONAL ACCESSORIES Stand External loudspeakers
2 audio / 1 video Yes 3.5 Silver 3244480114247 ETC- 240 V +/- 10% / 50 Hz 888 x 573 x x 740 x / 62.5 D,F,I,GB,GR,DK,NL,S,E,P,N CZ,H,PL,RU,SK,Fi 130 Wh / 4 Wh STA232 -