Do not place items exposed to cooking off !n your washer, items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire, DO not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or producL

SAVE THESE INSTRUCTIONS

GROUNDING

This appliance

INSTRUCTIONS
in the event of malfunction or breakdown, grounding will reduce the risk

must be grounded,

of electric shock by providing a path of least resistance for electric current, This appliance is equipped with a cord having an equipment=grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with aft local codes and ordinances.
Do not use an adapter or extension cord. Do not remove groundprongo ftyou don't have the proper outlet, consult an electrician,

,A WARNING:

Improper connection
of the equipment_grounding

conductor

can result in risk of electric shock,
Check with a qualified electrician or serviceman if you are in doubt as to whether Ihe appliance is properiy grounded Do not modify the plug provided with the appllance - if it does not lit the outlet, have a proper outlet instated by a qualified electrician

SPECIFICATIONS

Shipping Bolts
Power Plug tf the supply cord is damaged, it must be replacedby the manufa_-tureror _ authorized se_ce technicianin order to avoid a hazard
Panel Water Drum Cold Water Inlet Air Vent for Safety [ Hot Water Inlet Circulation Nozzle

Dispenser Door

Safety Cover (PLC Modem)
= Name: m Power suppty: = Size: a Weight: " Wash capacity: = Spin speed:
" Permissible water pressure:
Frontqoading Washing Machine 120V-. 60Hz 68,6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 12&1 cm (D with door open) 27"(W) X 293/4"(D) X 38 t 1/16"(H), 5013/16"(D with door open)
190 tbs, (86 kg) 3.32 cu. ft, (IEC: 383 cu. fl,) _ 1320 rpm max. 4,5 ~ 145 PSI (30 ~ 1000 kPa)
* Specifications subject to change by manufacturer,,

Hot/Cold (1 each) Hose

1) Per IEC 60456, washes the equivalent

Wrench

Tie strap to secure drain hose to standpipe, tn_ethose, or laundry tub
of a 3.83 cu_ ft. agitator washer,
INSTALLATION INSTRUCTIONS
Install or More unit wlnere it x_ill not be exposed to temperatures below freeTJng or exposed to ontside weather conditions. Properly ground washer to conform with all governing codes and ordinances. To reduce the r'isk of electrlc sht_ck, tlt_ not install the washer in humid spaces, The base opening must not he _tbstructed by carpeting when the washing machine is installed on a carpeted floor:, In countries where there are areas which may be subject to infeMatlon by cockroaclnes or other vermin, pay particular attention to keeping the appliance and its surrmnndings in clean c_mdition at all times. Damage caused by eockr_aches nr other vermin will n_t be covered by the appliance warranty.

,. Shipping bolts

The appliance is fitted with shipping bolts to prevent internal damage during transport
= Removing shipping bolts
1. To prevent internal damage during transport, 4 locking bolts are installed Before operating the washer, remove the bolts and braces f! they are not removed, it may cause severe vibration, noise, and malfunction.
3. Take out the 4 botts and braces by twisting the braces slightly Keep the 4 bolts, braces and lhe wrench for future use Whenever the appliance is transported, the shipping boits and braces must be replaced.
2, Unscrew the 4 bolts with the wrench supplied
4oClose the holes with the caps supplied
,,. IN%TAll ___.v. ATI{3N

= Installation

clearances

to fully open

The location must be iarge enough the washer door.

,. Washer dimensions

!i _ i i

(cm) (10 crn)

[Side Vie'.'.,]

(68 Scm) (Front view)

= Level floor
Allowable slope under entire washer is 1. To minimize noise and vibration, the washer Most installations require (10 cm) clearance a minimum 4 in, behind the washer MUST be Installed floor. on a solidly constructed are not or weakly to a

= Minimum installation

recessed

spacing

area installation.
Carpeting and soft tile surfaces recommended. Never install the washer supported structure NOTE:

on a platlorm

The following dimensions shown are for the minimum spacing altowed Additional spacing should be considered for instaIMtionand servicing. Additional clearances might be required for wall, door and floor moldings Additional spacing of I in. (cm) on all sides of the washer is recommended to reduce noise transfer
Companion considered appliance spacing should also be
A firm_ solid floor is even (gore critical
front*leadlng ,._asher than to a lop-loader. Iflyour flour is wood and!or ff'ame construction, you may need to reinforce il, Front-loaders use substantially faster spin speeds than top-loaders, causing greater vibration. If the floor is not solid, yuur washer will vibrate, You will hear and feel lhe vibration throughout your house.

- Power outlet

Must be within 60 in (m) of either side of the washer,. Do not overload the outlet with more than one appliance T_me-delay fuse or circuit breaker is recommended NO]'E: It is the personal t'esponsibility and obligation of the eu_omer to have a proper outlet installed by a qualified electrician,

= Electrical connection

- Do not use an extension If the supply If the machine Connect cord or double adapter by a qualified person in order to avoid a hazard

cord is damaged,

it must be replaced
will not be used for an extended to a grounded
time, unplug it and shut off the water supply with current wiring regulations

the machine

outlet in accordance

- The appliance

must be positioned
so that the plug is easily accessible

CAUTION!

Concerning

the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appfiance and has no additianat outlets or branch circuits. Check the specification page of this owner's manual to be certain, Do not overload wall cutlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wlre insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodk',ally examine the cord of your appliance, and if its appearance indicates damage or detedoratJom unplug it, discontinue use of the appliance, and have the cord repfaced with an exact replacement part by an authorized servicer Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed [na door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance,

= Connecting

water supply hose
-Water supply pressure must be between 45 and 145 PSI (30-1000 kPa), Cold water tap Do not crossthread when connecting inlet hose to the valve. If the water supply pressure is more than 145 PSI, a pressure reducing device should be installed Two Sealing washers are supplied with the water inlet hoses to prevent water leaks. Check for leakage of washing machine connections by turningthe tap completely on Periodically check the condition of the hose and replace the hose if necessary Make sure that there is no kink in the hose and that it is not crushed Be sure that the two water input ports are connected to the correct water fatJcets.The connector for hot water is colored red
Washing Machine is to be connected Old hoses should eel be used,

to lhe water

using new hos_.
Repairs to the washing machine mus! only be carried out by qualified personnel, Repairs carried out by inexperienced persong may cilllse injury or serious malhmctioning. Contact your local service eentero i)o net instal! your washing machine in a room where temperatures below freezing may occur Frozen hoses may burst antler pressure The rliabillty of the elee|reaic control unit may be impaired at lemperatures below the freezing point,
If the applinnce is delivered in the winter months and temperatures are below fre_ing_ store |he washing machine at room temperature for a few hours hehwe putting it into operatiom
= Installation of drain hose

, Place the end of the drain hose in the hole of the floor drain system

Laundry tub

_=:.::_::/_ u -,'

Tie," _

m=i 96 (_4 m)

_._.!.

The drain hose shouid not be placed higher than 96 in from the bottom of the washer, Properly securing the drain hose wilI protect the floor from damage due to water leakage,
When insta!ling the drain hose at a sink, secure it so it cannot break away and cause flooding and damage Properly securing the drain hose will protect the floor from damage due to water leakage
This equipment is not designed for maritime use or Ibr mobile installations such as in RV's, aircraft, etc. Turn off tile faucet i[ the machine ksto be left f()r an exlended period or time (e_g. holiday). When disposing ot' the appliance, cut off the power cable, and desLroy the plug. Disable the door lock to prevent young children being trapped inside. Packa_ng material (e.g. Films, Styrofoam) can be dangerous I_r children, There is a risk or" suffocation[ Keep all packaging from children
INSTALLATION INSTRUCTIONS..

n Level adjustment

Leveling the washing machine properly excessive noise and vibration,, Install the appliance preferably in a corner of the room adjust the adjustable feet as the prevents
on a solid and level floor surface,
, if the floor is uneven, required feet.)
(Do not insert pieces of wood, etc, under

_i_ ii_

Exlend tlme feet no more than a_essary to level the _asher- The more the feet are extended, the mnre Ihe wast_er will vibraleo
Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level (Use a level)
After the washer is level, tighten the lock nuts up against of the base of the washer All lock nuts must be tightened it is critical to adjust the feet perfectly This must be done while the washer is spinning with a toad Use the wrench (supplied) to adjust the feet until there is no vibration Then tighten the Iock nuts to prevent further adjustment, NOTE: If Iltere are vibration and noise during the spin cycle, re.check the leveling of Ihe washer, adjust the feel ms req_fired, and lighten the lock nuls securely to prevent changes in adjuslmenL Run the washer wilh a lest load to make certain your washer is properly leveled. Pal appreximalely 6 peomls of taundry in the machine. Then, press POWER, RINSE+SPIN, and START/PAUSE, in lhal order. When the machine spins at high speed, yetiS* thai it is stable. adjust Ihe feel accordingly. If hal

Adjustable feet

Adjustable feet * Diagonal Check do_lw the edges af th washing the machine should elteck both directions,) the machine top plate machine

When pushing

top plate diagonally,

not move up

attd dowll at all, (Please, If the machine diagonal!v,

rocks when pushing

adjust the feet again.
PREPARATION BEFOREWASHING

1. Fabric Care Labels

Look for a care label on your clothes be washed This will tell you about the fabric content of your garment and how it should

2, Sorting

To get the best res{_lts, sort clothes into loads that can be washed with the same wash cycle, Different fabrics need to be washed in different ways Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing discoloration of white clothing If possible, do not wash heavily soiled items with Iightiy soi}ed ones Soil (Heavy Normal Lighl) Separale clolhes according lo amount of soil. [
Colnr (White, L ighls, Darks) Lint (Lint Producers, Colleclors)
Separate while fabrlc_ from colored fabrics. Wash lint producers am! lint coileclors separately,

3. Check before loading

Combine targe and small items in a !oad Load large items first Large items should not be more than half the total wash load, Do not wash single items This may cause an out-of-balance load Add one or two similar items
Check all the pockets to make sure that they are empty Things such as clip, matches, pens, coins, and keys can damage both your washer and your clothes
Close zippers, hooks, and strings to make sure that these items do not snag on other clothes
Pretreat dirt and stains by brushing a little detergent dissolved in water onto stains like collars and cuffs to help lift dirt
NO_I E: Do not watCh or spin water-proof

clothes

USING THE DISPENSER
The amumatie dispenser censLsts n[ ffmr compartments which h(_lci1) liquid chlorine bleach, 2) liquid fabric sohener; 3) liquid or powdered detergent h_r prewash and 4) liquid or powdered detergent and color safe btead_ fi}r main wash All laundry products can be added at once in their respective dispenser ompartments_ Tlney will be dispensed at the appropriate time for m(tst effective cleaning. After Inading the laundry additives into the dispenser, close Ihe dispenser drawer: Add detergent, bleach and fabric softener to the automatic dispenser following these steps:
1 Open the dispenser drawer 2 Load the _aundry products into the appropriate compartments 3 Close the dispenser drawer

,. About detergent

Low sudsing detergent is recommended for this washer_ Use the manufacturer's recommended amount If low sudsing detergent is not available, a reduced amount of regular detergent may be used Because reducing the amount of detergent may reduce cleaning, it is important to pretreat stains, sort carefully by color and soil level, and avoid overloading, Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load. For best results, avoid using too much detergent

1. Prewash Detergent Compartment

//_'\ _k \ _ _U

Add detergent to this compartment when using the Prewash option, Liquid or powdered detergent may be used in this compartment,, The detergent will automatically be dispensed during Prewash if the Prewash option is selected, Add 112the recommended amount of detergent to the Prewash compartment and the recommended amount of detergent to the main wash compartment NOTE : Liquid detergent will drain into the wasiner drum as iI is added,

I "-Uquid o Febr

Softener "_-_._ompartment

" Prewash

Compartment
2. Main Wash Detergent Compartment
-Add measured detergent to this compartment for

3. Uqutd

Bleach Compartment
Main wash. Detergent is flushed from the dispenser at the beginning of the cycle Either powdered or liquid detergent can be used may be along with detergent.
- Add measured liquid chlorine bleach to this compartment The bleach will be automatically dispensed at the proper time during the wash cycle. Do not exceed the maximum fill line Overfilling can cause early dispensing of the bleach which could result in damaged clothes_ Do not pour undiluted liquid chlorine bleach directly onto the toad or into the drum Fabric damage can

Occur,

Liquid or powdered color-safe bleach added to the main wash compartment the same type of liquid or powdered
, When using liquid detergent, make st_re the liquid detergent box and insert are in place Do not exceed the maximum fill line

, Do not use powdered

bleach in this compartment
For powered detergent, remove both the liquid detergent box and insert Powdered detergent will not dispense with the liquiddetergent box and insert in place
4. Fabric Softener Compartment
Add recommended amount of fabric softener to this compartment Dilute concentrated softeners with warm water to the fit[ line Do not exceed the maximum fill line, Overfilling can cause early dispensing of the fabric softener which could resuft in stained ctothes - Do not pour _abric softener directiy on the wash toad
The fabric softener will be automatically during the tast rinse cycle NOTE: dispensed

Insert

Liquid Detergent
Do not place, store, or spill laundry products (soap, detergent, bleach, softener, etc.) on the top of your washer or dryer These products can damage the finish or controls if left there too toltg_

and gets dottles much cleaner, yet is more gentle un the fabrics, than top load washer.;. W_hing time can be reduced significantly f(}r small leads ur lightly _iled h;ads by selecting Quick Cycle with tt_e Option button and setting the Soil Level button at Light.

HOW TO USE THE WASHER

5. Custom Program
Custom Program allows you to store a customized wash cycle for future use
]'0 make a Clls|em |)re,ram:

7. Spin speed

i i i iH i ull lull ill IHHHHH"I
To change the spin speed, press the Spin Speed button repeatedly to cycle through available options
1 Select a cycle 2 Select WashfRinse Temperature, and Soil Level. 3 Select other desired Options 4 Press and hoid Custom Program button 3 seconds (2 beep sounds) The Custom program is now stored for future use, To reuse the program, select Custom Program and press StartJPause (_

i i, Jlul, ll_

Spin Speed,

8 Soil

, To change the soil level, press the Soil Level button repeatedly until the desired setting is on,
9. Beeper -Press repeatedly to adjust the volumeof the Beeper

6. Wash/Rinse

Temperature
Select a water temperature based on the type of load you are washing Follow the fabric care label and chart below for best results SuggestedWashTemp. Extra Hot Hot Warm Cold Garment i:
Kitchentowe_s, sheets, and baby garments Whitesand Heavy : soiled color-fast items Most loads BdghtlycoloreditemS, i washablewoolens
Warm rinses leave the loads dryer than cotd rinses Warm rinses increase wrinkling. In cold climates, a warm rinse makes the foad more comfortable to handle. Cold rinses save energy The Cold rinse temperatures depend on the cotd water at your faucet

1. Prewash

OPTION
This disp}ay shows: a) the estimated time remaining in the cycle when
- Use this option for loads that need pretreatment Adds 16 minutes prewash and drain.
operating, b) the error code when an error has been detected

2. Rinse+Spin

, , ,, ,u,,uH,,,,, 1,,,,,,,,,,, ,,,
Use this option to rinse and then spin
. These fightsshow which portion of the cycle the washer is operating

3. Extra Rinse

This option provides water at rinse cycle. an additional rinse and more

. Use this option to ensure the removal or bleach residue from garments
of detergent I PRE-WASH TO C_ LOCK _ '

4. Stain cycle

. Adds time to the wash and rinse for better stain removal Automatically provides a rinse
Use this option to prevent unwanted use of the washer Press and hold PRE WASH button for 3 seconds to lock/unlock control When Child lock is seL CHILD LOCK lights and all buttons are disabled except the Power _$) button You can lock the washer while it is operating

5. Quick Cycle

The Quick cycle offers a quick cycle time Suggested uses include freshening newly purchased clothes, or clothing that has been packed away
Lights whenever the door of the washer by pressing is locked. the
The door can be unlocked Start/Pause_)
button to stop tile washer.
NOTE: [[ the water temperature or the ][eve| is leo high, Ihe door ,_tnnol be unlockedo l)o not tO" to h}rce tile door _pen when DOOR I,OIE:KED lights on,

MAINTENANCE

Bel'ore cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards. When disposing ol'the appliance, cut offthe power cable, destroy the plug, and disable the door lock to prevent young children from being trapped inside

= The water inlet filter

" IE "error message will blink on the controt panel when water does not enter the dispenser - 1!your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged We recommend cleaning it every few months 1.Turn off the water tap 2. Unscrew the water inlet hose
3. Clean the filter using a hard bristle brush

4_Tighten the inlet hose

= The drain pump filter The drain filter collects threadsand small objects left in the taundry. Check regularlythat the filter is cleanto ensure smoothrunning of your machine.
Allow the water to coot down before cleaning

the drain pump filter

1.Open the lower cover cap (# with a too! such as coin Turn the drain plug @:,o pull t out the hose.
2. Unplug lhe drain plug _.%, allowing the water to flow out At thistime use a vessel to prevent water from flowing onto the floor When water does not flow any more, turn the pump filter (._) pen to the left o
& Remove any foreign objects from the pump filter _3.)After c_eaning, turn the pump filter (_'_ clockwise and insertthe drain plug (_) to the origina[ place Close the lower cover cap,_'_

= Cleaning the Dispenser

may need to be cleaned periodically

The dispenser

due to laundry

additive

build-up Remove the liquid detergent
drawer out until it stops Pult the dispenser
on the bleach insert Press down the lock tab Remove the drawer
inserts from their bteach box, softener and compartments

Run warm water and use a soft brush or cloth on the drawer, laundry additives, using water and a small brush

liquid detergent

box and inserts to remove

any excess

Clean the drawer opening Follow the illustrations NOTE:
in reverse order to replace the parts to their proper location substance on lhe drawer opening other than waler because il will drain into tile tub_ substance h'om the

Do no! use any cleaning

If this shnuld happen, set tile washer for a rinse and spin cycle to remove washer before doing a hlad of laundry.

any cleaning

= The washing drum
. If you live in a hard water area, lime scale can continuously build up in places where it cannot be seen and it is not easily removed from the drum, Over time the build-up of scale clogs appfiances, and if it is not kept in check, these will eventually have to be replaced. Although the washing drum is made of Stainless steel, specks of rust can be caused (paper clips, safety pins, etc.) which have been left in the drum -The washing drum should agents, be cleaned from time to time. make sure they are suitable part of your washing for washing machine machine use by small metal articles
If you use descating Descaler

dyes, or bleaches,

could contain

components

that can damage
Remove the spots with a stainless steei cleaning agent Never use steel wool
= The water circulation nozzle
Clean the water circulationnozzle,if clogged = Cleaning your washer
1. Exterior Proper care of your washer can extend its life The outside of the machine can be cleaned with warm water and a neutral, non-abrasive household detergent, Immediately wipe off any spills with a damp cloth Try not to damage the surface with sharp objects =_ IMPORTANT: Do not use methylaled spirit, solvents or similar products 2, Interior Dry around the washer door opening, flexible gasket and door glass These areas should always be clean to ensure a water-tight sea! Run washer through a complete cycte using hot water. Repeat process if necessary.

NOTE: Remove hard _vater deposits _ing only cleaners labeled as safe for _wL_hing machines

,, Winterizing

instructions
ff the washer is stored in an area where freezing can occur or moved in freezing temperatures, follow these winterizing instructions to prevent damage to the washer: 1. Turn off water suppty tap, 2_ Disconnect hoses from water supply and drain water from hoses 3. Plug e{ectrical cord into a properly grounded electrical outlet 4oAdd 1 gallon (38_) nontoxic recreational vehicfe (RV) antifreeze to empty wash drum C_ose door
5. Set spin cycle and iet washer spin for t minute to drain out aHthe water Not all of the RV antifreeze will be expelled 6. Unplug electrical power cord, dry drum interior,and close door 7. Remove the two-compartment container from the Dispenser Drain any water in compartments and dry the compartments 8. Store washer in an upright position 9, To remove antifreeze from washer after storage, run empty washer through a complete cycle using detergent Do not add laundry

TROUBLESHOOTING GUIDE

* This washing machine is equipped with automatic safety fanctions tqliell delect and diagnose problems at an early stage and react approprlately. When tile machine does not funcfiun properly or does n{)t funclion at all, check tile folh)wing points befibre yon call the Service Department.

Problem

Rattling and clanking noise

Possible Cause

Foreign objects such as coins or safety pins may be in drum or pump

Solution

Stop washer and check drum and drain filter If noise continues after washer is restarted, call for service

Thumping

Heavy wash loads may produce a thumping sound This is normal
ff sound continues, washer is probably out of balance Stop and redistribute wash load

Vibrating

Have all the transit bolts and packing been removed? Wash load may be unevenly distributed in the drum Are all the feet resting firmly on the ground?
See Insta[lafion Instructionsfor removing shipping bolts Stop washer and rearrange wash load
Adjust the leveling [eel Make sure all four feet are in firm contact with the floor, while the washer spin cycle with a load is in the

Water leaks

Fii[ hose connection

[s loose at

Check and tighten hose connections
tap or washer. House drain pipes are clogged Unclog drain pipe Contact plumber if necessary

Excessive suds

Too much detergent unsuitable detergent
Reduce detergent sudsing detergent

amount or use low

Water does not enter washer or it enters slowly
. Water supply is not adequate in area Water supply tap is not complelely open, Water inlet hose is bent - The filter of the inlet hose clogged

Check another

tap in the house,

Fully open tap

Straighten
Check the filter of the inlet hose,
Water in the washer does not drain or drains slowly
Drain hose is bent or clogged The drain _ter is clogged.
Clean and straighten the drain hose Clean the drain filter

Washer does not start

Poss_le
Solution Make sure plug fits tightly in wall outlet.
Electrical power cord may not be plugged in or connection may be loose,,
* House fuse is b]own, circuit breaker outage tripped, or a power has occurred
Reset ckcuit breaker or replace Do not increase fuse capacity
tf problem is a circuit overload, have it corrected by a qualified electrician
- Water supply tap is not turned

Turn on water supply tap

Washer won't spin
Check that the door is firmly shut
Close the door and press the Start/Pause button After pressing the Start/Pause button, it may take a few moments before the clothes washer begins to spin The door must lock before spin can be achieved

Wash cycle time delayed

* The washing time may vary by the amount of laundry, water pressure, water temperature, and other using conditions
If the imbalance is detected or if the suds removing program operates, the wash time shah be increased

RLM problem

See the Owner's Manual of RLM & PLC modem.

Possible

Check another tap in the house Fully open tap Straighten hose Check the filter of the inlet hose
- Water supply is not adequate in area Water supply taps are not completely open Water inlet hose is bent The filter of the inlet hose clogged Drain hose is bent or clogged The drain filter is clogged Load is too smaIL Load is out of balance The appliance has an imbalance detection and correction system ff individual heavy articles are loaded (bath mat, bath robe, etc ) and the imbalance is too great, after several atlempts to restart the spin cycle the machine wilt stop and the error code will be displayed Is the door opened or not completely closed?
Clean and straighten the drain hose Clean the drain filter Add t or 2 similar items 1o help balance the toad Rearrange load to aIlow proper spinning
Close the door completely =_ If dE is not released, call for service Unplug the power plug and call for service
The water overfills due to the faulty water valve The water level sensor malfunction Overload in motor Overload in motor
Close the water tap Unplug the power plug Call for service
The washer experienced a power failure

Restart the cycle

Your LG Washing Machine will be repaired or replaced, at LG's option, _f it proves to be defective in material or workmanship under normal use, during the warranty pedod ('_/Varmnty Period") set forth below, effective from the date ("Date of Pumhase") of original consumer pumhase of the product. This warranty ts good only to the orfglnal purchaser of the product and effective only when used In the United States, Including Alaska, Hawaii, and US Territories

WARRANTY pERIOD: LABOR: One Year from the Date ofPurchase

HOW SERVICE IS HANDLED:

In-Home Service: Please retatn dealer's dated bgl ticket as evidence of the Date of of warranty, and submit a copy of the service person at the time provided.
of sale or delivery PARTS (exceot as listed below): One Year from the Purchase for proof Dateof Purchase. the bill of sate to Electronic Control Board; 2 Years from theDate of warranty service is
Purchase, Drum Motor: 7 Years from the Dateof Purchase Stainless Steel Drum: Lifetime
Please call 1"877-714-7486

and choose the

ReplacementUnits and Repair Parts may be new or factaryremanofacturad_
approprfata opt]on to locate your nearest LG Authorized Service Center,
Reptscemant nite and RepairPartsare wanantsdfor the U remaining portion ofthe odginal unit's warrantyperiod, Qrv!s!!,our website at: http:ltwww.19servtoe.com
THiS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE., NEITHER THE MANUFACTURER NOR ITS [J.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT UMITATION, LOST REVENUES OR PRORTS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE, Some states do not aitew the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, sa the abave exclusion or limitation may not apply to you. This warranty gives you specie legal rights and you may also have other rights that vary from state to state THIS LIMITED WARRANTY DOES NOT APPLY TO:
Service t_ps to your home to deliver, pick up, and/or install the product, instruct, or replace house fuses or correct Widng, or corre_on of unauthorized repairs. Damages or operating problems that result from misuse, abuse, operation outside environmental spec_llcatians or contrary to the requirements of precautions in the Operating Guide, accident, vermin, fire, flood, Improper installation, acts of God, unauthorized modlflce_Jonor alteration, incorrect electrical current or voltage, or commercial use, or use for other than intended purpose,, tNTERACTWE Customer CENTER NUMBERS InferCall 1-877_714_7486(24 hoursa day, 365 days per year]
The cost of repair or replacement under these excluded circumstances shall be berne by the consumer. CUSTOMER To obtain