Washing Machine

OWNER'S MANUAL

MODEL : WP-610N/WP-620N

Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. This washing machine is designed and manufactured for household use only.

CONTENTS

SAFETY MEASURE PARTS IDENTIFICATION INSTALLATION PREPARATIONS BEFORE WASHING HOW TO WASH HOW TO RINSE HOW TO SPIN AFTER FINISHING REFERENCE CARE AND MAINTENANCE TROUBLESHOOTING GUIDE SPECIFICATIONS

3~4 4~5 6~9 10~13~15

SAFETY MEASURE
Manufacturer is not responsible for accidents caused by the user as a result of not following the user's guide.

CAUTION

In Operation
Do not insert the hand in the spin dryer basket while the machine is in operation. (Do not let children climb on the machine or climb into the cabinet. It may cause injury.)

Installation Area

Avoid area exposed to snow, rain, or where humidity is high. It may cause electric shock.

Switch Area

Avoid watering on the switch area. It may cause electric shock or fire.

Spin Motor

After using spinning program 3 times or more continuously. Do not use spinning program within 1 hour.

Volatile Material

Do not use volatile material such as Benzene, Gasoline, bug killer. Do not leave strong alkaline substance such as bleach inside the cabinet. Damage on plastic surface and rubber parts may occur.
Avoid electric heater, candle light, cigarette light, bug smoker, etc. near the machine. It may ignite or deform plastic part.

Electric Outlet

Avoid connecting several electric devices to single outlet. It may cause fire.

Hard objects

Remove pins, buckles and removable hard objects in the wash load to avoid damaging the cabinet before your washing.

Power Cord

If the power supply cord is damaged, it must only be replaced by the manufacture or its service agent or a similarly qualified person in order to avoid a hazard.

Hot water

Avoid using hot water over 50C. It may deform plastic parts or cause malfunction.

Installation

Install the washing machine on a horizontal support. Otherwise, it may cause vibration and noise.
Do not plug in the power supply cord when your hand wet. Plug out the power supply cord, When cleaning or not using the washing machine for a long time.

PARTS IDENTIFICATION

Off 0 Gentle Normal Strong Wash Rinse Drain Off 0

Water Selector

Wash Timer

Wash Program

Drain Selector

Spin Timer

1. Water Supply Inlet Connect here with the inlet hose from the water faucet to feed water to the cabinet. 2.Wash Timer Select the desired time for washing or rinsing. 3. Wash Program Set the program to GENTLE, NORMAL, STRONG according to kinds and quantity of the laundry. 4. Drain Selector Select WASH-RINSE for washing and rinsing and DRAIN to drain the water out of the cabinet.
5. Spin Timer Select the desired time for spinning. The maximum limit is 5 min. Dont rotate the knob more than prescribed limit. 6. Water Selector Select WASH to supply water for washing and rinsing and SPIN for spin shower rinse.
WASHING COVER WATER SUPPLY SELECTOR LEVER OVER FLOW FILTER
(Please refer to page 9 "How To Wash" when you fill water into the wash cabinet)

SPIN DRYER COVER

SAFETY COVER-2 SPIN DRYER BASKET EARTH WIRE

ROTATION FILTER-C

(Cabinet)
(For models with two prong plug)
PULSATOR FIXING SCREW PULSATOR POWER CORD

Accessories

Safety Cover Drain Hose Asm

INSTALLATION

Installation area
Set on flat and firm floor. Incorrect installation may cause severe noise and break down. Maintain more than 10cm between the side of drain hose and the wall. A carpet must not obstruct the ventilation openings.

Connecting the drain hose
Connect the drain hose to the outlet of the plunger valve located at the back side of the washing machine. Push the clamp toward the body of the washing machine as shown in the figure.

Notes :

Be sure to re-route the drain hose so that it is not kinked or has sharp bends which will prevent proper drainage. The level of the drain should be slightly lower than the lowest part of the washing machine in order to ensure proper and complete drainage.
Connecting the earth wire
Install the earth wire to prevent short-circuit due to leaking current and electric shock. It is attached at the back of the washer. Earth Connect it to the metal water pipe. If the water wire pipe is made of plastic, it does not have the earth effect. Do not connect the earth wire to the gas pipe, lightning arrester, telephone connecter, etc. WARNING-THE APPLIANCE WITH TWO-PRONGED PLUG MUST BE GROUNDED.

Gas pipe

Other earthing method
After connect the earth wire to the earth copper plate, bury it at least 75 cm deep under the wet ground. Connect the earth wire to the earthing only outlet. When installing it in an area where earthing is not possible, purchase a short-circuit breaker (15 mA at operation, 7.5 mA at idle) and connect it to the outlet.
Short-circuit breaker 75cm Earth copper plate

Earth wire Earth wire

Connecting the power plug
Insert the power plug into the outlet. Before connecting the power plug, check if the voltage setting of the washer matches the outlet voltage. If AC outlet with ground terminal is used, grounding is not needed. If not, never forget earthing (Refer earthing method above). The appliance must be positioned so that the plug is accessible.

Ground terminal

Voltage Change (only for dual voltage)
This washer is assembled for 220V, but can be changed from 220V to 110V(or 127V). Check your electrical source and follow the diagram below to convert voltage.
PREPARATIONS BEFORE WASHING

Preparation

I Connect the water supply hose to the water supply inlet. I Inlet hose
I Set the water supply selector lever to "WASH" for washing and rinsing, to "SPIN" for interim spin rinse. Note: The water selector lever should not be placed near the center (as shown in Fig otherwise water will flow into the wash and spin tub simultaneously.) (Fig )
I Connect the power cord to the electrical outlet.
I Drain hose Lay down the drain hose. Keep the drain hose flipped down while washing is in process.

Before washing

1 Check the washing instruction label

on the laundry.

any objects 2 Remove pockets of the 3 from the clothing. Object left in the pockets may damage the clothing or washing machine (It causes clogging of the drain hose).
Separate washing is required for oiled or dyed laundry.

HOW TO WASH

Set the drain selector to "WASH RINSE" position.
Set the water selector to "WASH"

Wash Rinse Drain

Open water supply and fill water till water level mark"H".That is because clothes can absorb adequate amount of water and water will not short.
Put the appropriate amount of detergent and the laundry into the wash tub. And add water to the desired water level which you want.
Select the wash program to "GENTLE", "NORMAL", or "STRONG" according to the kinds and quantity of the laundry

Gentle Normal Strong

Set the desired wash time.
Refer to TABLE 2 in REFERENCE on page 12.
Refer to TABLE 2 in REFERENCE on page 12
Refer to TABLE 2 in REFERENCE on page 12 for information on how to select the appropriate washing time.
When washing is finished, locate the drain selector to "DRAIN" position and drain Wash Rinse Drain the water out.
Spinning in the spin dryer basket. G Move the laundry into the spin dryer basket. G Put the laundry down lightly. G Place the safety cover horizontally on the laundry. G Set the desired spin time with the spin timer.

HOW TO RINSE

Economic water supply rinse
Interim spin rinse prior to regular rinsing helps removing sudsy water from the laundry and improve rinsing efficiency. Also is helpful to water saving.

1 After washing. into Move the laundry
the spin dryer basket. Place the safety cover horizontally on the laundry.
Set the 2 selectorwater to SPIN
3 Supply the water to flow appropriately. water supply, close 4 Stopsafety cover-2 and the

spin dryer cover

WATER SELECTOR
5 Set the desired spin time with the spin timer
After interim spin rinse, move the laundry into the wash tub for rinsing.
Move the rinse time 7 Set the drain selector to 8 Set wash timer with 9 After rinsing,the spinthe laundry into "WASH RINSE" position the and feed appropriate water quantity to wash

Off 0 Wash Rinse Drain

dryer basket and set the spin time with the spin timer.
10 Move the laundry into the wash tub and repeat step 7 to 9 for more rinsing.
Continuous water supply rinse
This over flowing rinse is helpful to improve rinsing efficiency and remove the lint.
the rinse time 1 Set the drain 2 Put the laundry into the 3 Set wash timer andwith the feed selector to WASH wash tub and supply

RINSE position.

the water.
water continuously during the rinsing.

HOW TO SPIN

1. Put the laundry evenly into the spin dryer basket. 2. Put the laundry down lightly. 3. Place the safety cover horizontally over the laundry. 4. Close the spin dryer cover. 5. Set the spin timer according to the following table.

Safety cover

Spin time guide
Type of clothing Thin fabrics (synthetic fabrics, mixed fabrics) Sweaters (synthetic fabrics) Cotton underwear Sheets, towels Spin time 1 minute 1~3 minutes 3~5 minutes 5 minutes
If the spin dryer basket is off-balance and vibrates excessively, stop the spinning, rearrange the clothes evenly, and then resume spinning. If spinning fail to stop within 15 seconds after the spin dryer cover is opened, the brake is out of order. Immediately stop using the machine and request repair service.

AFTER FINISHING

1. Remove the laundry from the spin dryer basket and close the spin dryer cover. 2. If there is water in the wash tub, set the drain selector to DRAIN in order to drain it out completely. 3. Disconnect the power cord from the electrical outlet. 4. Clean the washing machine. (Refer to CARE AND MAINTENANCE on page 13~14.)

REFERENCE

TABLE 1. WEIGHT GUIDE FOR CLOTHES
Type of clothing Under shirt Handkerchief Bath towel Shirt Socks (1 pair) Pajama (shirt and pants) Winter undershirt Workclothes Blouse Wash selector Type of fabric Cotton Cotton Cotton Mixed fabric Mixed fabric Cotton Cotton Mixed fabric Mixed fabric Weight per piece 150g(53oz) 50g(1.8oz) 300g(10.6oz) 200g(7.1oz) 50g(1.8oz) 500g(17.6oz) 600g(21.2oz) 800g(28.2oz) 200g(7.1oz)
TABLE 2. GUIDE FOR WASHING
Type of fabric Wash time Amount of Water Amount of Amount of laundry level water detergent

Synthetics, Silk, Woolen, Knits

GENTLE

2~5 min.

0.5~2 kg

Cotton, Linen NORMAL

5~10 min.

2~3 kg
Very soiled cotton and linen

STRONG

10~15 min.
Note : Amount of laundry is based on dry laundry. Detergent amount is based on a general synthetic detergent.

CARE AND MAINTENANCE

Be sure to disconnect the power cord from the electric outlet before starting care and maintenance.

Cleaning washing machine

I If the washing machine itself becomes dirty. It can be cleaned with a mild liquid detergent. Never use abrasive cleaner or chemicals such as benzene or thinner to clean the washing machine, because these materials cause damage both the painted surfaces and the plastic parts.

Pulsator

I If a button or some other object gets caught in the pulsator. 1.Use a screwdriver to loosen the screw in the center of the pulsator, and lift the pulsator straight up in order to remove the button or other object. 2. Replace the pulsator and tighten the screw.
Overflow filter & Rotation filter-C
Pull the overflow filter Turn the net over and Lift up the area of the forward from the wash tub over flow filter. rinse in water in the direction of the Take out the rotation filter-C by arrow. pulling in direction as shown.
Use a brush or hand to remove all of the lint which has adhered to the overflow filter.
Insert the over flow filter back into the wash tub.
Insert the rotation filter-C back into the overflow filter.
If only rotation filter-C needs to be washed, proceed the process 2

6 on the upper figure.

Spin dryer basket
I If clothing becomes trapped between the spin dryer basket and the spin tub. 1. Take hold of the front of the safety cover-1. 2. Insert screwdriver (- Type)into the hook position. 3. Pull the safety cover-1 upward. 4. Remove the article of clothing. 5. Close the safety cover-1, pressing down on it so that it fits securely into the spin tub.
Safety cover-1 Hook Top Cover Hook

TROUBLESHOOTING GUIDE

Before Requesting Service
Problem Motor does not operate, Spin dryer basket does not operate. Checking point Is the power cord firmly plugged in? Is the timer turned to a suitable point except OFF? Is there any clothing dropped between the basket and tub? Is the spin dryer cover closed? Is the laundry gathered to one side of the spin dryer basket? Is there lint stuck in the plunger valve? Is the end of the drain hose guide located at an exceed height?

No draining

SPECIFICATIONS
Power source Water level Water Pressure Dimensions Weight (Net) H 50
On SPECIFICATION LABEL Less than 100 kPa (1 kgf/cm 2) WP-610N/620N : 900 mm. (W D H) 19 kg

I How to read the manufactured month and year from the label stuck on the back of the product. EX) 1 T W 1 Serial No. Product code Month Year (The last digit to year) I Main service part list : Refer to below listed part name when you need service call. Part name - WASH MOTOR - SPIN MOTOR - S D BASKET - CYCLE TIMER ASSEMBLY - CAPACITOR - P-SHAFT ASSEMBLY Remark 90W 25W PLASTIC

LG Electronics

P/No.: 3828EY3008A

LG Electronics

P/No.: 3828FY3057L

OWNER'S MANUAL

Washing Machine
MODELS : WP-830Q/WP-840Q WP-970Q(S)/WP-1250Q(S)
Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. This washing machine is designed and manufactured for household use only.

CONTENTS

SAFETY MEASURE.. 3~4 PARTS IDENTIFICATION.. 4~5 INSTALLATION...6~7 PREPARATIONS BEFORE WASHING.8 HOW TO WASH...9 HOW TO RINSE..10~11 HOW TO SPIN..11 AFTER FINISHING..12 REFERENCE...12 CARE AND MAINTENANCE..13~14 TROUBLESHOOTING GUIDE..14 SPECIFICATIONS...15

SAFETY MEASURE

Manufacturer is not responsible for accidents caused by the user as a result of not following the user's guide.

CAUTION

In Operation Do not insert the hand in the spin dryer basket while the machine is in operation. (Do not let children climb on the machine or climb into the tub Injury may occur.) Switch Area Avoid watering on the switch area It may cause electric shock or fire. Volatile Material Do not use volatile material such as Benzene, Gasoline, bug killer. Do not leave strong alkaline substance such as bleach inside the tub. Damage on plastic surface and rubber parts may occur. Electric Outlet Avoid connecting several electric devices to single outlet. It may cause fire. Power Cord If the power supply cord is damaged, it must only be replaced by the manufacture or its service agent or a similarly qualified person in order to avoid a hazard.
Installation Area Avoid area exposed to snow, rain, or where humidity is high. It may cause electric shock.
Spin Motor After continuous using spinning program 3 times, please stop spinning more than 1 hour. Otherwise the spin motor could be damaged of fired. Heat Avoid electric heater, candle light, cigarette light, bug smoker, etc. near the machine. It may ignite or deform plastic part.
Hard objects Remove pins, buckles and removable hard objects in the wash load to avoid damaging the tub before your washing
Do not plug in the power supply cord when your hand wet.

Hot water

Avoid using hot water over 50C. It may deform plastic parts or cause malfunction.

Installation

Install the washing machine on a horizontal support. Otherwise, it may cause vibration and noise.

PARTS IDENTIFICATION

WP-830Q/WP-840Q

GEN TL

NORM A L S T

SH-RI NSE WA

DRA I N

WATER SELECTOR

WASH TIMER

WASH PROGRAM

DRAIN SELECTOR

SPIN TIMER

WP-970Q(S)/WP-1250Q(S)

Gentle Normal Strong

Wash Rinse Drain
Wash Program Water Supply Selector Drain Selector

Wash Timer

Spin Timer
1. Water Supply Inlet Connect here with the inlet hose from the water faucet to feed water to the tub. 2. Wash Timer Select the desired time for washing or rinsing. 3. Wash Program Set the selector to Gentle, Normal, Strong according to kind and quantity of the laundry.
4. Drain Selector Select Wash Rinse for washing and rinsing, and Drain to drain the water out of the tub. 5. Spin Timer Select the desired time for spinning. The maximum limit is 5 min. Dont rotate the knob more than prescribed limit. 6. Water Supply Selector Select WASH to supply water for washing and rinsing and SPIN for spin shower rinse. Buzzer(Option : Inside) It is electrically operated to facilitate you to know the completion of washing cycle.

WP-970Q(S)

WASHING COVER WATER SUPPLY SELECTOR LEVER OVER FLOW FILTER (Please refer to page 9 "How To Wash" when you fill water into the wash tub) SAFETY COVER-2 SPIN DRYER BASKET EARTH WIRE (For models with two prong plug) SPIN DRYER COVER

ROTATION FILTER-C TUB

PULSATOR (Vertical movement of smaller plate can be operated only when sufficient amount of laundry is deposited.)

SAFETY COVER-1

WP-830Q/WP-840Q/WP-1250Q(S)
WASHING COVER WATER SUPPLY SELECTOR LEVER OVER FLOW FILTER (Please refer to page 9 "How To Wash" when you fill water into the wash tub) ROTATION FILTER-C TUB

POWER CORD

Remark : for WP-1250Q use panel control same as WP-970Q
SAFETY COVER-2 SPIN DRYER COVER SPIN DRYER BASKET EARTH WIRE (For models with two prong plug)
SAFETY COVER-1 POWER CORD

Accessories

Safety Cover Drain Hose Asm

OPTION OPTION

Wheel Asm 4

Wheel Shaft 4

Adjustable Leg 2

INSTALLATION

Installation area
Set on flat and firm floor. Incorrect installation may cause severe noise and break down. Maintain more than 10cm between the side of drain hose and the wall. A carpet must not obstruct the ventilation openings.
Leveling the machine (Option)
Lift the front of the washing machine and twist the Adjustable Leg until the washing machine is placed evenly. If the Adjustable Leg is too short, use the Level Adjusting Plates as shown.
Connecting the drain hose
Connect the drain hose to the outlet of the plunger valve located at the back side of the washing machine. Push the clamp toward the body of the washing machine as shown in the figure.

Notes :

Be sure to re-route the hose so that it is not kinked or has sharp bends which will prevent proper drainage. The level of the drain should be slightly lower than the lowest part of the washing machine in order to ensure proper and complete drainage.
Install the earth wire to prevent short-circuit due to leaking current and electric shock. It is attached at the back of the washer. Earth Connect it to the metal water pipe. If the water wire pipe is made of plastic, it does not have the earth effect. Never connect the earth wire to the gas pipe, lightning arrester. telephone connecter, etc.
Connecting the earth wire

Gas pipe

WARNING-THE APPLIANCE WITH TWO-PRONGED PLUG MUST BE GROUNDED.

Other earthing method

After connect the earth wire to the earth copper plate, bury it at least 75cm deep under the wet ground. Connect the earth wire to the earthing only outlet. When installing it in an area where earthing is not possible, purchase a short-circuit breaker (15mA at operation, 7.5mA at idle) and connect it to the outlet.

Short-circuit breaker 75cm
Earth wire Earth wire Earth copper plate
Connecting the power plug
Insert the power plug into the outlet. Before connecting the power plug, check if the voltage setting of the washer matches the outlet voltage. If AC outlet with ground terminal is used, grounding is not needed. If not, never forget earthing (earthing method above). The appliance must be positioned so that the plug is accessible.

Ground terminal

Voltage Change (only for dual voltage)
This washer is assembled for 220V, but can be changed from 220V to 110V(or 127V). Check your electrical source and follow the diagram below to convert voltage.
PREPARATIONS BEFORE WASHING

Preparation

Connect the water supply hose to the water supply inlet. Inlet hose
Set the water supply selector lever to "WASH" for washing and rinsing, to "SPIN" for interim spin rinse. Note: The water selector lever should not be placed near the center (as shown in Fig otherwise water will flow into the wash and spin tub simultaneously.) (Fig )
Connect the power cord to the electrical outlet.

Before washing

Drain hose Lay down the drain hose. Keep the drain hose flipped down while washing is in process.
1 Check the washing 2 instruction labels
on the clothing to be washing
Remove any objects from the pockets of the clothing. Object left in the pockets may damage the clothing or washing machine (especially cause clogging of the drain hose).
Separated washing is required for oiled or dyed laundry.
Note) For better wash of lots of laundry, Putting more heavily-soiled laundry first is recommended.

HOW TO WASH

Set the drain selector to "Wash Rinse" position.
Set the water supply selector to"WASH"
Open water supply and fill water till your desired level of tap mark(ie.:if you decide the level 'M', then fill water till tap mark of 'M'. That is because clothes can absorb adequate amount of water and water will not short.

Drain Selector

Water Supply Selector
Put the appropriate amount of detergent and the laundry into the wash tub. And add water to the desired water level which you want.
Select the wash program to "Gentle", "Normal", "Strong" according to kinds and quantity of the laundry
Set the desired wash time.

Wash Timer Wash Program

Refer to TABLE 2 in REFERENCE on page 12.
Refer to TABLE 2 in REFERENCE on page 12
Refer to TABLE 2 in REFERENCE on page 12 for information on how to select the appropriate washing time.
When washing is finished, select the drain selector to "Drain" position and drain the water out. Wash Rinse Drain
Spinning in the spin dryer basket. Move the laundry into the spin dryer basket. Put the laundry down lightly. Place the safety cover horizontally on the laundry. Set the desired spin time with the spin timer.

HOW TO RINSE

Interim spin rinse
Interim spin rinse prior to regular rinsing will remove sudsy water from the laundry and improve rinsing efficiency.
the water to washing. 1 After the laundry into the 2 Set the water supply 3 Allowappropriately. flow Put selector to SPIN spin dryer basket. 4 Turn off the water supply, Place the safety cover close the safety cover-2 horizontally on the laundry. and spin dryer cover
5 Set the desired spin time with the spin timer
spinning. 6 After the laundry Put
into the wash tub and rinse.
Economical water supply rinse
This course allows you to save water as this course is to rinse after feeding appropriate water to the tub.
the rinse time 1 Set the drain selector to 2 Set wash timer with 3 Put the laundry into the "Wash Rinse" position the spin dryer basket and and feed appropriate water to the tub.
set the spin time with the spin timer.

Spin T imer

4 Put the laundry into the wash tub and repeat 1 to 3 course.
Continuous water supply rinse
This over flowing rinse is helpful to improve rinsing efficiency and remove the lint.
1 Set the drain selector to Wash

Rinse position.

the the rinse time 2 Put the laundry into the 3 Set wash timer andwith wash tub and open the feed water faucet. water continuously.

HOW TO SPIN

1. Put the laundry evenly into the spin dryer basket. 2. Put the laundry down lightly. 3. Place the safety cover horizontally on the top of the laundry. 4. Close the spin dryer cover. 5. Set the spin timer according to the following table.

Safety cover

Spin time guide
Type of clothing Thin fabrics (synthetic fabrics, mixed fabrics) Sweaters (synthetic fabrics) Cotton underwear Sheets, towels Spin time 1 minute 1~3 minutes 3~5 minutes 5 minutes
If the spin dryer basket is off-balance and vibrates excessively, stop the spinning, rearrange the clothes evenly, and then resume spinning. If spinning fail to stop within 15 seconds after the spin dryer cover is opened, the brake is out of order. Immediately stop using the machine and request repair service.

AFTER FINISHING

1. Remove the laundry from the spin dryer basket and close the spin dryer cover, 2. If there is water in the wash tub, set the drain selector to Drain in order to drain it out completely. 3. Disconnect the power cord from the electrical outlet. 4. Clean the washing machine. (Refer to CARE AND MAINTENANCE on page 13~14.)

REFERENCE

TABLE 1. WEIGHT GUIDE FOR CLOTHES
Type of clothing Under shirt Handkerchief Bath towel Shirt Socks (1 pair) Pajama (shirt and pants) Winter undershirt Workclothes Blouse Type of fabric Cotton Cotton Cotton Mixed fabric Mixed fabric Cotton Cotton Mixed fabric Mixed fabric Weight per piece 150 g (53oz) 50 g (1.8oz) 300 g (10.6oz) 200 g (7.1oz) 50 g (1.8oz) 500 g (17.6oz) 600 g (21.2oz) 800 g (28.2oz) 200 g (7.1oz)
TABLE 2. GUIDE FOR WASHING

Type of fabric

Synthetics, Silk, Woolen, Knits 5~10 min. GENTLE 2~5 min.
Wash Wash Water selector time level

S L M H S L M H S L M H

Amount of laundry (Kilograms)
WP-830* WP-840* WP-970* WP-1250*
WP-830* WP-970* WP-1250* WP-830* WP-840* WP-840*

Amount of water (Liters)

Amount of detergent (Grams)

WP-970* WP-1250*

0.5~2.0

0.5~4.5 4.5~5.5

30~45 40~48 48~55 55~60 30~45 40~48 48~55 55~60 30~45 40~48 48~55 55~60
42~46 51~55 56~60 42~46 51~55 56~60 42~46 51~55 56~60
40~45 48~52 56~60 65~70 40~45 48~52 56~60 65~70 40~45 48~52 56~60 65~70

2.0~3.0 0.5~4.0

3.0~4.0 4.0~5.0 5.5~6.5 4.0~ 0.5~2.0 5.0~ 6.5~ 0.5~4.5 4.5~5.5
Cotton, Linen Very soiled

NORMAL

cotton and STRONG linen

10~15 min.

3.0~4.0 4.0~5.0 5.5~6.5 4.0~ 5.0~ 6.5~
Note) Amount of laundry is a weight of dry laundry.
Detergent is a general synthetic detergent. For better wash for lots of laundry, using about 300mg of detergent is reccomended. But if too much foam is made, decrease the amount of detergent.

CARE AND MAINTENANCE

Be sure to disconnect the power cord from the electric outlet before starting care and maintenance.

Washing machine

If the washing machine itself becomes dirty. The washing machine can be cleaned with a mild liquid detergent. Never use abrasive cleanser or chemicals such as benzene or thinner to clean the washing machine, because these materials will damage both the painted surfaces and the plastic parts.

Pulsator

If a button or some other object gets caught in the pulsator. 1. Take out the pulsator cap with "-" type driver. 2. Use a screwdriver to loosen the screw in the center of the pulsator, and lift the pulsator straight up in order to remove the button or other object. 3. Replace the pulsator and tighten the screw. 4. Replace the pulsator cap.

Rotation filter-C

1. Take out the rotation filter-C by pulling in the direction shown. 2. Turn the net over and rinse in water. 3. After cleaning, replace the rotation filter-C. WP-970Q(S)

Overflow filter

1. Pull the overflow filter forward from the wash tub in the direction of the arrow. 2. Use a brush or your hand to remove all of the lints whichs has adhered to 3. Insert the over flow filter back into the wash tub.

the overflow filter.

Spin dryer basket
If clothing becomes trapped between the spin dryer basket and the spin tub. 1. Take hold of the front of the safety cover-1 and pull the tub by the other hand. 2. Pull the safety cover-1 upward and then remove the article of clothing. 3. Close the safety cover-1, pressing down on it so that it fits securely into the spin tub.

Safety cover-1 Tub

TROUBLESHOOTING GUIDE
Before Requesting Service
Type of clothing Motor does not operate Spin dryer basket does not operate. Checking point Is the power cord firmly plugged in? Is the timer turned to a suitable point except OFF? Is there any clothing dropped between the basket and tub? Is the spin dryer cover closed? Is the laundry gathered to one side of the spin dryer basket? Is there any lint stuck in the plunger valve? Is the end of the drain hose guide located at an exceed height?

No draining

SPECIFICATIONS
Power source Water Pressure Water level

ON SPECIFICATION LABEL

Less than 100kPa (1kgf/cm ) WP-830Q/WP-840Q WP-970Q(S) WP-1250Q(S) H 55 H 61 H 67 M 48 M 54 M 58 L 41 L 46 L 50 S 43 S 35

Dimensions

WP-830Q/WP-840Q WP-970Q(S) WP-1250Q(S)
800x475x970mm. (WxDxH) 820x482x983mm. (WxDxH) 850x530x1017mm. (WxDxH) 34.5kg 31.5kg 40.5kg

Weight (Net)

How to read the manufactured month and year from the label stuck on the back of the product. EX) 2 T W 1 Serial No. Product code Month Year (The last digit of year)