input_dvd: unable to open raw dvd drive (/dev/rdvd): Permission denied ce n'est pas grave (moquezvous en). Par contre si vous avez : bash: xine: command not found ou : input plugin found : /usr/local/lib/xine/plugins/input_file.so(input_file.so) input plugin found : /usr/local/lib/xine/plugins/input_net.so(input_net.so) xine.c(736): /usr/local/lib/xine/plugins/input_dvd.so doesn't seem to be installed (libcss.so.0: cannot load shared object file: No such file or directory) C'est que /usr/local/bin n'est pas dans votre chemin de recherche (PATH) et/ou que /usr/local/lib n'est pas dans les librairies charges par dfaut. Relisez les prparatifs, ou tapez : LD_LIBRARY_PATH=/usr/local/lib /usr/local/bin/xine pour lancer xine. Pour spcifier le driver video, vous pouvez lancer xine avec l'option V (ex : xine V dxr3), pour l'audio avec A (ex : xine A oss). Xine se "souvient" ensuite du driver video ou audio que vous avez choisi (il modifie son fichier de configuraiton ~/.xine/config). Une sortie du type : [jice@taz jice]$ xine This is xine (X11 gui) a free video player v0.9.7 (c) 2000, 2001 by G. Bartsch and the xine project team. Gnr avec la bibliothque xine 0.9.7 [sam 15 dc 2001 21:56:43][gcc version 2.(Mandrake Linux 8.1 2.960.62mdk)][Linux 2.4.826mdk i586]. Version de la bibliothque de xine trouve : 0.9.7 (0.9.7). Display is not using Xinerama. xres 1024 yres 768 depth 16 dxr3_vo: setting aspect ratio to full dxr3_vo: setting up overlay mode dxr3_vo: setting tv_mode to PAL 50Hz load_plugins: video output plugin dxr3 successfully loaded. audio_oss_out: Opening audio device. audio_oss_out: realtime check: *FAILED* audio_oss_out: Audio driver realtime sync disabled. audio_oss_out:.will use system realtime clock for softsync instead audio_oss_out:.there may be audio/video synchronization issues audio_oss_out : supported modes are mono stereo load_plugins: audio output plugin oss successfully loaded. xine_init entered xine: using MMX optimized memcpy() load_plugins: input plugin found : CDA load_plugins: input plugin found : DVD load_plugins: input plugin found : stdin_fifo
load_plugins: input plugin load_plugins: input plugin load_plugins: input plugin load_plugins: input plugin load_plugins: input plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin load_plugins: demux plugin video decoder plugin found audio decoder plugin found audio decoder plugin found audio decoder plugin found audio decoder plugin found spu decoder plugin found : spu decoder plugin found : video decoder plugin found video decoder plugin found audio decoder plugin found video decoder plugin found video decoder plugin found spu decoder plugin found : audio decoder plugin found xine_init returning found : TCP found : file found : RTP found : VCD found : HTTP found : MPEG_TS found : QUICKTIME found : MPEG found : ASF found : AVI found : CDA found : MPEG_ELEM found : MPEG_PES found : OGG found : MPGAUDIO found : MPEG_BLOCK : vfw (win32) video decoder : vfw (win32) audio decoder : a/52dec : dts : mad spudec dxr3spudec : dxr3mpeg2 : mpeg2dec : lpcm : videofill : ffmpeg video decoder sputext : vorbis

insmod insmod insmod insmod lsmod f f f f i2c verbose=1 scan=1 i2c_debug=0 tuner debug=0 type=3 videodev bttv radio=1 card=1 vidmem=0xdc0
Configuration des modules Pour charger automatiquement ces modules lorsqu'on en a besoin, ajoutez dans /etc/conf.modules ou /etc/modules.conf (pour les distributions rcentes c'est forcment ce fichier l), les lignes suivantes, en adaptant les valeurs votre configuration :
alias charmajor81 bttv preinstall bttv modprobe k tuner options i2c verbose=1 scan=1 i2c_debug=0 options bttv radio=1 card=1 vidmem=0xdc0 options tuner debug=0 type=3
Description des paramtres des modules : bttv radio vidmem : l'adresse du framebuffer sur votre carte vido. Afin de dterminer ce paramtre, lancez /usr/local/bin/v4lconf (ou juste : v4lconf). Celui ci va vous rpondre : using X11 display :0.0 (dga available) video mode: 1024x768, 16 bit/pixel, 2048 byte/scanline framebuffer at 0xe4000000 ok Pour trouver la valeur de vidmem, regardez aprs framebuffer. Ici, le paramtre serait 0xe40. Si vous obtenez une image dcale par rapport la fentre de votre application, le problme vient peuttre de l. card : le type de carte que vous possdez, parmi : card=0 gnrique card=1 MIRO PCTV card=2 Hauppauge (bt848) card=3 STB card=4 Intel Create and Share PCI/ Smart Video Recorder III card=5 Diamond DTV2000 card=6 AVerMedia TVPhone card=7 MATRIXVision MVDelta card=8 Lifeview FlyVideo II (Bt848) LR26 card=9 IMS/IXmicro TurboTV card=10 Hauppauge (bt878) card=11 MIRO PCTV pro card=12 ADS Technologies Channel Surfer TV (bt848) card=13 AVerMedia TVCapture 98 card=14 Aimslab Video Highway Xtreme (VHX) card=15 Zoltrix TVMax card=16 Prolink Pixelview PlayTV (bt878) card=17 Leadtek WinView 601
card=18 AVEC Intercapture card=19 Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture uniquement) card=20 CEI Raffles Card card=21 Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 card=22 Askey CPH050/ Phoebe Tv Master + FM card=23 Modular Technology MM205 PCTV, bt878 card=24 Askey CPH05X/06X (bt878) [many vendors] card=25 Terratec Terra TV+ Version 1.0 (Bt848)/Vobis TVBoostar card=26 nouvelle Hauppauge WinCam (bt878) card=27 Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 card=28 Terratec TerraTV+ card=29 Imagenation PXC200 card=30 Lifeview FlyVideo 98 LR50 card=31 Formac iProTV card=32 Intel Create and Share PCI/ Smart Video Recorder III card=33 Terratec TerraTValue card=34 Leadtek WinFast 2000 card=35 Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II card=36 Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner card=37 Prolink PixelView PlayTV pro card=38 Askey CPH06X TView99 card=39 Pinnacle PCTV Studio/Rave card=40 STB2 card=41 AVerMedia TVPhone 98 card=42 ProVideo PV951 card=43 Little OnAir TV card=44 Sigma TVIIFM card=45 MATRIXVision MVDelta 2 card=46 Zoltrix Genie TV/FM card=47 Terratec TV/Radio+ card=48 Askey CPH03x/ Dynalink Magic TView card=49 IODATA GVBCTV3/PCI card=50 Prolink PVBT878P+4E / PixelView PlayTV PAK / Lenco MXTV9578 CP card=51 Eagle Wireless Capricorn2 (bt878A) card=52 Pinnacle PCTV Studio Pro card=53 Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS card=54 Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] card=55 Askey CPH031/ BESTBUY Easy TV card=56 Lifeview FlyVideo 98FM LR50 card=57 GrandTec 'Grand Video Capture' (Bt848) card=58 Askey CPH060/ Phoebe TV Master Only (No FM) card=59 Askey CPH03x TV Capturer card=60 Modular Technology MM100PCTV card=61 AG Electronics GMV1 card=62 Askey CPH061/ BESTBUY Easy TV (bt878) card=63 ATI TVWonder card=64 ATI TVWonder VE card=65 Lifeview FlyVideo 2000S LR90 card=66 Terratec TValueRadio card=67 IODATA GVBCTV4/PCI card=68 3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA) card=69 Active Imaging AIMMS card=70 Prolink Pixelview PVBT878P+ (Rev.4C) card=71 Lifeview FlyVideo 98EZ (capture only) LR51 card=72 Prolink Pixelview PVBT878P+9B (PlayTV Pro rev.9B FM+NICAM) card=73 Sensoray 311 card=74 RemoteVision MX (RV605) card=75 Powercolor MTV878/ MTV878R/ MTV878F card=76 Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP) card=77 GrandTec Multi Capture Card (Bt878) card=78 Jetway TV/Capture JWTV878FBK, Kworld KWTV878RF card=79 DSP Design TCVIDEO card=80 Hauppauge WinTV PVR type : le type de votre tuner, choisir parmi la liste : type=0 Temic PAL (4002 FH5) type=1 Philips PAL_I (FI1246 et compatibles) type=2 Philips NTSC (FI1236 et compatibles) type=3 Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF) type=4 pas de Tuner type=5 Philips PAL_BG (FI1216 et compatibles) type=6 Temic NTSC (4032 FY5) type=7 Temic PAL_I (4062 FY5) type=8 Temic NTSC (4036 FY5)

Installation d'un scanner parallle grce
Voici pour l'exemple mon fichier dll.conf : # enable the next line if you want to allow access through the network: #net mustek_pp ditez le fichier correspondant votre scanner : mustek_pp.conf dans notre cas. Dans la section DEVICES, prcisez sur quel port est connect votre scanner, soit : port 0x378 pour un scanner connect sur lp1 port 0x278 pour un scanner connect sur lp2 port 0x3bc pour un scanner connect sur lp0 Attention : pour une carte mre avec un seul port parallle, lp0 correspond 0x378. Dcommentez les entres correspondant au modle exact de votre scanner. Commentez toutes les autres sauf : option iomode alt_lock, option niceload, option buffer 122400 Voici mon fichier mustek_pp.conf : # For documentation see sanemustek_pp(5) # GLOBAL # # option iomode [mode] must come before all port< definitions, or it won't # have the effect you'd expect # enable this option, if you think your scanner supports the UNI protocol # note however that this might disable the better EPP protocol #option iomode try_mode_uni # choose between two different ways to lock to port option iomode alt_lock # set the maximal height (in lines) of a strip scanned (default: no limit) #option stripheight 0 # wait n msecs for bank to change (default: 700 msecs) # if this value is to low, stripes my appear in the scanned image #option waitbank 700 # size (in bytes) of scan buffer (default: 1 megabyte) #option buffer 1048576 # try to avoid to heavy load. Note that this reduces scan speed option niceload # Define the time the lamp has to be on before scan starts (default 5 secs) #option waitlamp 5 # DEVICES # # specify the port your scanner is connected to. Possible are 0x378 (lp1) # 0x278 (lp2) and 0x3bc (lp0) port 0x378 # the following options are local to this scanner # WELL KNOWN OPTIONS # # most scanners only need msecs to change bank > try it out Mustek ScanExpress 6000 P name SE6000P vendor Mustek option waitlamp 15 # # # # Mustek ScanExpress 600 SEP name SE600SEP vendor Mustek option waitlamp 15
# Mustek ScanMagic 4800 P # name SM4800P # vendor Mustek
# option waitlamp 15 # # # # # # # # # # # # # Mustek 600 III EP Plus name 600IIIEPP vendor Mustek option waitlamp 15 some models only need 5 secs. Mustek ScanMagic/Express 1200 ED Plus (this scanner isn't yet supported!!!) name SM1200EDP name SE1200EDP vendor Mustek this scanner has an optical resolution of 600 dpi option use600 this scanner *must* use option niceload option niceload
# Fidelity Imaging Solutions Inc. Gallery 4800 # name Gallery4800 # vendor FidelityImagingSolutions # Viviscan Compact II # name CompactII # vendor Viviscan # # # # Medion MD9848 (aka AldiScanner) name MD9848 vendor Medion option waitbank 250

alias charmajor81 bttv preinstall bttv modprobe k tuner options i2c verbose=1 scan=1 i2c_debug=0 options bttv radio=1 card=1 vidmem=0xdc0 options tuner debug=0 type=3
Autre exemple, pour une Debian (/etc/modules):
i2ccore i2c_debug=1 i2c_algobit i2c_debug=1 tuner debug=1 type=33 videodev bttv radio=1 card=39 pll=1 fieldnr=1
Description des paramtres des modules : bttv radio vidmem : l'adresse du framebuffer sur votre carte vido. Afin de dterminer ce paramtre, lancez /usr/local/bin/v4lconf (ou juste : v4lconf). Celui ci va vous rpondre : using X11 display :0.0 (dga available) video mode: 1024x768, 16 bit/pixel, 2048 byte/scanline framebuffer at 0xe4000000
ok Pour trouver la valeur de vidmem, regardez aprs framebuffer. Ici, le paramtre serait 0xe40. Si vous obtenez une image dcale par rapport la fentre de votre application, le problme vient peuttre de l. card : le type de carte que vous possdez, parmi : card=0 gnrique card=1 MIRO PCTV card=2 Hauppauge (bt848) card=3 STB card=4 Intel Create and Share PCI/ Smart Video Recorder III card=5 Diamond DTV2000 card=6 AVerMedia TVPhone card=7 MATRIXVision MVDelta card=8 Lifeview FlyVideo II (Bt848) LR26 card=9 IMS/IXmicro TurboTV card=10 Hauppauge (bt878) card=11 MIRO PCTV pro card=12 ADS Technologies Channel Surfer TV (bt848) card=13 AVerMedia TVCapture 98 card=14 Aimslab Video Highway Xtreme (VHX) card=15 Zoltrix TVMax card=16 Prolink Pixelview PlayTV (bt878) card=17 Leadtek WinView 601 card=18 AVEC Intercapture card=19 Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture uniquement) card=20 CEI Raffles Card card=21 Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50 card=22 Askey CPH050/ Phoebe Tv Master + FM card=23 Modular Technology MM205 PCTV, bt878 card=24 Askey CPH05X/06X (bt878) [many vendors] card=25 Terratec Terra TV+ Version 1.0 (Bt848)/Vobis TVBoostar card=26 nouvelle Hauppauge WinCam (bt878) card=27 Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50 card=28 Terratec TerraTV+ card=29 Imagenation PXC200 card=30 Lifeview FlyVideo 98 LR50 card=31 Formac iProTV card=32 Intel Create and Share PCI/ Smart Video Recorder III card=33 Terratec TerraTValue card=34 Leadtek WinFast 2000 card=35 Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II card=36 Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner card=37 Prolink PixelView PlayTV pro card=38 Askey CPH06X TView99 card=39 Pinnacle PCTV Studio/Rave card=40 STB2 card=41 AVerMedia TVPhone 98 card=42 ProVideo PV951 card=43 Little OnAir TV card=44 Sigma TVIIFM card=45 MATRIXVision MVDelta 2 card=46 Zoltrix Genie TV/FM card=47 Terratec TV/Radio+ card=48 Askey CPH03x/ Dynalink Magic TView card=49 IODATA GVBCTV3/PCI card=50 Prolink PVBT878P+4E / PixelView PlayTV PAK / Lenco MXTV9578 CP card=51 Eagle Wireless Capricorn2 (bt878A) card=52 Pinnacle PCTV Studio Pro card=53 Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS card=54 Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90] card=55 Askey CPH031/ BESTBUY Easy TV card=56 Lifeview FlyVideo 98FM LR50 card=57 GrandTec 'Grand Video Capture' (Bt848) card=58 Askey CPH060/ Phoebe TV Master Only (No FM) card=59 Askey CPH03x TV Capturer card=60 Modular Technology MM100PCTV card=61 AG Electronics GMV1 card=62 Askey CPH061/ BESTBUY Easy TV (bt878) card=63 ATI TVWonder card=64 ATI TVWonder VE card=65 Lifeview FlyVideo 2000S LR90 card=66 Terratec TValueRadio card=67 IODATA GVBCTV4/PCI