Linksys SPA2102 Manual
Linksys SPA2102, size: 626 KB
Linksys SPA2102 Quick Installation
Linksys SPA2102 Install Guide
Linksys SPA2102 Product Brochure
External, AC 120/230 V
Easy to install, and simple to use, the Cisco SPA2102 Phone Adapter with Router connects a standard telephone or fax machine to an IP-based data network. Voice over IP (VoIP) service providers can offer residential and business users traditional and enhanced communication services via the customer's broadband connection to the Internet. The Cisco SPA2102 features two basic telephone ports to connect existing analog phones or fax machines to a private branch exchange (PBX) system. It also inc... Read more [ Report abuse or wrong photo | Share your Linksys SPA2102 photo ]
How to Unlock your Linksys SPA2102 R
User reviews and opinions
|fenriz||7:06am on Monday, September 6th, 2010|
|Great VOIP adapter as alternative to expensive telcos Works very well, easy to setup. Great so far I purchased this unit to use with Voip.|
|Mitchel Cohen||2:15am on Thursday, June 17th, 2010|
|Dump my stone-age phone line & switch to IP phone. The provider iTalkBB Singapore (www.italkbb.com.sg) is new here. I use a cable modem so can get rid of my local phone company and have lots of features and now... I use a cable modem so can get rid of my local phone company and have lots of features and now saving $30 a month and have free unlimited long distanc...|
|Charl||6:05am on Saturday, June 12th, 2010|
|we have one line being used for voice, the other line takes incoming modem calls twice a day, and it works well! Remote provisioning aside, the while Cisco/Linksys/Sipura line of small business oriented phones Just Work.|
|nordish||4:25am on Sunday, April 25th, 2010|
|spa Cisco Small Business Pro SPA2102 Phone Adapter with Router - VoIP phone adapter - Ethernet.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Before You Begin
Make sure you have the following: An active Internet connection An active Internet phone service account and its settings A cable/DSL modem One computer for configuration of the Phone Adapter An analog telephone or fax machine with an RJ-11 phone cable
Connect one end of an Ethernet network cable (included) to the ETHERNET port of the Phone Adapter. Connect the other end to the Ethernet port of your PC. Connect one end of a different Ethernet network cable to the INTERNET port of the Phone Adapter. Connect the other end to your cable/DSL modem. Power on the cable/DSL modem. Connect the included power adapter to the Phone Adapters power port, and then plug the power adapter into an electrical outlet. The power LED on the front panel will light up as soon as the Phone Adapter powers on. Power on your PC.
Configure the Phone Adapter
Launch the web browser on the PC. Enter http://192.168.0.1/ advanced in the Address field (192.168.0.1 is the default local IP address of the Phone Adapter). Then press the Enter key. If your Internet Telephony Service Provider (ITSP) did not supply a password, you will not see a login screen. Proceed to step D. If your ITSP supplied a password, you will see a login screen. In the User Name field, enter user, the default user name for user access (this cannot be changed). Then enter the password supplied by your ITSP.
A B D C E
Proceed to the appropriate instructions for your Internet Connection Type: DHCP , Static IP or PPPoE. , DHCP 1 Select DHCP for the Connection Type. 2 If you use a cable modem, you may need to configure the MAC Clone Settings. (Contact your ISP for more information.) Enable MAC Clone Service. If your service uses a specific PC MAC address, then select yes from the
Phone Adapter with Router 5 V Power Adapter RJ-45 Ethernet Cable RJ-11 Phone Cable (not included with all models) Power Adapter Quick Installation
Connect the Phone Adapter
Power off your network devices, including your modem and PC. Connect one end of an RJ-11 phone cable to the Phone Adapters PHONE 1 port. Connect the other end to your analog telephone or fax machine.
E MAC Clone Settings
Enable MAC Clone Service
NOTE: Make sure your PCs
Ethernet adapter is set to obtain an IP address automatically. For more information, refer to Windows Help.
setting. Then enter the PCs MAC address in the Cloned MAC Address field.
3 Click Submit All Changes. Static IP 1 Select Static IP for the Connection Type. 2 In the Static IP Settings section, enter the IP address in the Static IP field, the subnet mask in the NetMask field, and the default gateway IP address in the Gateway field.
IMPORTANT: Do not connect the
PHONE port to a telephone wall jack. Make sure you only connect a telephone or fax machine to the PHONE port. Otherwise, the Phone Adapter or the telephone wiring in your home or office may be damaged.
The Router - Status screen will appear. Click the WAN Setup tab.
Phone Adapter with Router
Model SPA2102 Model No. No.
Repeat Step B with the PHONE 2 port if you have an additional telephone or fax machine to connect.
Using the Interactive Voice Response Menu
3 In the Optional Settings section, enter the DNS server address(es) in the Primary DNS and optional Secondary DNS fields. 4 Click Submit All Changes. PPPoE (most DSL users) 1 Select PPPoE for the Connection Type. 2 Enter the user name in the PPPoE Login Name field, and enter the password in the PPPoE Login Password field. 3 Click Submit All Changes. If the Phone Adapter is preconfigured by your ITSP then you , do not need to change any of the default voice settings. Refer to the documentation supplied by your service provider for more information. If you want to change the settings for your Internet phone service, refer to the User Guide, which is available on the Linksys website at www.linksys.com. If you want to configure network settings using the Interactive Voice Response Menu, refer to the next section. This section explains how to use the Interactive Voice Response Menu to configure the Phone Adapters network settings. You will use the telephones keypad to enter your commands and select choices, and the Phone Adapter will use voice responses. To access the Interactive Voice Response Menu: The settings you have saved will take effect after you hang up the telephone. The Phone Adapter may reboot at this time.
Interactive Voice Response Menu
First, set the Internet Connection Type to static IP address; otherwise, you will hear, Invalid Option, if you try to set the static IP address. Use the * (star) key when entering a decimal point. First, set the Internet Connection Type to static IP address; otherwise, you will hear, Invalid Option, if you try to set the network or subnet mask. Use the * (star) key when entering a decimal point. First, set the Internet Connection Type to static IP address; otherwise, you will hear, Invalid Option, if you try to set the gateway IP address. Use the * (star) key when entering a decimal point. First, set the Internet Connection Type to static IP address; otherwise, you will hear, Invalid Option, if you try to set the IP address of the primary DNS server. Use the * (star) key when entering a decimal point.
Confirm Press 1. Cancel - Press * (star).
This feature may be protected by a password available only from your ITSP. If necessary, enter the password*. The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, Option successful. Hang up the phone. The Phone Adapter will reboot, and all settings will be reset to their defaults. The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, Option successful. Hang up the phone. The Phone Adapter will reboot and all user-configurable settings will be reset to their factory default settings.
Enter Interactive Voice Response Menu
Set Static IP Address
Use this command to enter the Interactive Voice Response Menu. Do not press any other keys until you hear, Linksys configuration menu. Please enter the option followed by the # (pound) key or hang up to exit. Hear the Internet connection type of the Phone Adapter. Hear the IP address assigned to the Phone Adapters Internet (external) interface. Hear the network or subnet mask assigned to the Phone Adapter. Hear the IP address of the Phone Adapter (usually the network router). Hear the MAC address of the Phone Adapter in hexadecimal string format. Hear the version number of the firmware running on the Phone Adapter. Hear the IP address of the primary DNS (Domain Name Service) server. Hear the port number of the Internet Web server used for the Web-based Utility. Hear the local IP address of the Phone Adapter. Enable/Disable WAN Access to the Web-based Utility 7932 Enable Press 1. Disable Press 0.
A PPPoE B C D
Use a telephone connected to the PHONE port of the Phone Adapter. (You can only access the Interactive Voice Response Menu through an analog telephone, not any of the Internet phones.) Press **** (in other words, press the star key four times). Wait until you hear the Linksys configuration menuplease enter the option followed by the # (pound) key or hang up to exit response. Refer to the following table that lists actions, commands, menu choices, and descriptions. After you select an option, press the # (pound) key. To exit the menu, hang up the telephone.
Set Network (or Subnet) Mask
User Factory Reset
Check Internet Connection Type Check Internet IP Address
Set Gateway IP Address
Check Network Mask (or Subnet Mask) Check Gateway IP Address Check MAC Address
Set Primary DNS Server IP Address
* Follow these instructions to enter the password. A, B, C, a, b, or c press 2. D, E, F, d, e, or f press 3. G, H, I, g, h, or i press 4. J, K, L, j, k, or l press 5. M, N, O, m, n, or o press 6. P Q, R, S, o, q, r, or s press 7. , T, U, V, t, u, or v press 8. W, X, Y, Z, w, x, y, or z press 9. All Other Characters press 0.
Using the Interactive Voice Response Menu While entering a value, such as an IP address, you may exit without entering any changes. Press the * (star) key twice within half a second. Otherwise, the * will be treated as a decimal point or dot. After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your selection. To save the new setting, press 1. To review the new setting, press 2. To re-enter the new setting, press 3. To cancel your entry and return to the main menu, press * (star). For example, to enter the IP address 184.108.40.206 by keypad, press these keys: 191*168*1*105. Press the # (pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu. If the menu is inactive for more than one minute, the Phone Adapter will time out. You will need to re-enter the menu by pressing ****.
Set the Mode
Check Firmware Version Check Primary DNS Server IP Address Check Internet Web Server Port Check Local IP Address Set Internet Connection Type
Router/NAT Mode - Press 0. Bridge/Switch Mode - Press 1.
If the Phone Adapter acts as the router for your network, use the router/NAT mode. If your network already has a router, use the bridge/switch mode. Use this setting to enable or disable WAN access to the Web-based Utility. (This Utility lets you configure the Phone Adapter.) After you hear, Option successful, hang up the phone. The Phone Adapter will automatically reboot.
DHCP - Press 0. Static IP Press 1. PPPoE - Press 2.
Select the type of Internet connection you are using. Refer to the documentation supplied by your Internet Service Provider (ISP).
For example, to enter the password phone@321 by keypad, press these keys: 746630321. Then press the # (pound) key to indicate that you have finished entering the password. To cancel your entry and return to the main menu, press * (star).
For additional information or troubleshooting help, refer to the User Guide, which is available on the Linksys website. Contact your Internet Telephony Service Provider for further support. Linksys Website http://www.linksys.com or http://www.linksys.com/support
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright 2006 Cisco Systems, Inc. All rights reserved.
Linksys SPA 2102 ATA Installation Guide
For analog phone or fax extensions
To configure and activate your Linksys SPA 2102 ATA, please have your phone system administrator follow these steps:
To get started, check to see if your extension(s) need to be configured. 1. First go to the www.8x8.com website and Sign-In to My Account.
2. Enter Login and Password.
For further assistance on activating your Linksys SPA 2102 ATA, contact 8x8 Customer Support on 1.888.898.8733
3. Click the Configure button(s) for each extension to be configured (i.e. 1014, 1015).
Note: If your extension says Activate in the blue box, it is already configured and you can go directly to the Installing your Linskys ATA section on page 3.
INSTALLATION GUIDE Linksys SPA 2102 ATA
Configure Extension Settings 1. You can select the following features and information for the extension. Once done, click Next. Note: You can always modify these settings later on.
2. You will need to verify or provide your E911 address, and then click Continue.
3. If no phone number has been selected, you can select a phone number for the extension. Then click Continue.
Installing your Linksys SPA 2102 ATA
Now that your extensions are configured, you can install and activate your device(s). Follow the diagram below to connect your device using the ports on the back panel. You will require either an analog phone or a fax machine with an analog phone to activate your device with 8x8 service using the Phone 1 port.
DC 5V Power
Analog Phone or Fax Machine
Computer or Laptop
Internet Connection (Router or Broadband Modem)
Use the PHONE 1 and PHONE 2 ports to connect an analog phone (or fax machine) with an RJ-11 telephone cable. The ETHERNET port connects to an individual network device, such as a PC or a Laptop. The INTERNET port connects to your router or if you have no router, direct to your cable or DSL Broadband Modem. Note: If you connect directly to a broadband modem, you will first need to configure your Linksys ATA to act as a router. Please see the instructions in the Using your Linksys ATA as a Router section. The Power port is where you connect your AC power adapter. 3
Activating Your Device
Obtain the Activation Code for your Linksys 2102 ATA device. If this has not been communicated to you in an Equipment Shipped email from 8x8, or if you do not have access to this email, you can retrieve the activation codes from your 8x8 Self Service Portal. Note: If you purchased a Second Port Fax Extension Plan for the Phone 2 port, further activation is not required. Locating an Activation Code Refer to the figure below for these steps: a. Just log on to your Self Service Portal at myaccount.8x8.com and click on the Activate button of the extension that you wish to activate. b. A pop up screen will display the activation code for the extension. c. Use the activation code and simply follow the steps below for activation.
Enter Your Activation Code 1. Make sure your Linksys 2102 ATA is connected to the Internet, and that a regular telephone or a fax machine with a telephone is attached to the Phone 1 port. NOTE: If you have a fax machine without a telephone handset, attach a regular telephone to the Phone 1 port and then replace it with the fax machine after the phone port is activated. 2. Lift your handset as if you were answering your phone or making a call. You should hear a recorded message with instructions on how to enter your activation code and activate your device. NOTE: If you do not hear the recorded message, check all your wiring again, and if you are still having problems, call 8x8 Service at: 1.888.898.8733 for assistance. 3. Enter the activation code that corresponds with the extension number you are activating, and press #. 4. After entering the code, you should hear the successful activation message. 5. Your device should restart in one minute or less. If it does not restart, please restart your device by disconnecting your power and reconnecting power. 6. After restarting, the Phone 1 or Phone 2 indicator lights on the front panel should be solid green and you should be able to make phone calls (place a sample call to verify) and if this is a phone port that you want to use for fax, you can now connect your fax after a test call was successful.
Using your Linksys ATA as a Router
These instructions are only for use when you have no separate router, wireless router, or combination broadband modem/router already in your network. If you do not have a router, you can connect your Broadband modem directly into your Linksys ATA and then configure it to act as a router. Please follow the instructions below to configure it: Configure Linksys ATA 1. Determine the IP address of your Linksys. a. Plug in an analog phone to the Phone 1 or Phone 2 port. b. Dial **** and you will hear the Linksys Configuration Menu. c. Dial 110# to obtain the IP address of your Linksys ATA. 2. Access the Linksys ATA web Interface to your Linksys ATA. a. Open a browser window on your PC or laptop. b. Enter the IP address into your browser. c. This should open up the configuration window. If you cant access the configuration window: Recheck your IP address If you have difficulty, plug your PC or laptop directly into the Ethernet port of the ATA and type in the IP address. If you still have difficulty, go back to the IVR and dial **** from the phone connected to your ATA, then dial 7932# and then dial 1 to turn on the web interface.
3. Select the Advanced link, and in the advanced screen, select the LAN Setup tab. Select NAT from the Networking Service pull down menu to enter the ROUTER mode.
4. Your ATA Internet port can be connected directly to a broadband modem and the Linksys SPA 2102 can be used as an ATA for your phone, and as a router for your PC or laptop when plugged directly into the Ethernet port of the ATA. a. To return to the original settings, so your ATA device can be used with a router (rather than connected directly to a broadband modem), select Bridge from the Networking Service pull down menu.
If you need detailed instructions on connecting your Linksys ATA as a router to your Internet Service Provider, please refer to the Linksys SPA2102 Router Configuration Guide at: http://www.8x8.com/Support/BusinessSupport/Documentation.aspx
Reference Section: Indicator Lights
The status of your adapter can be determined by looking at the indicator lights on the front panel.
Green. The Power LED lights up when the phone adapter is powered on and connected to the Internet. It flashes when the Phone Adapter is not connected to the Internet. The LED also flashes when the phone adapter is booting up or upgrading its firmware.
Green. The INTERNET LED lights up when there is an active connection through the port. If the LED is flashing, then there is traffic moving through that port.
PHONE 1 or PHONE 2
Green. The PHONE LED (PHONE 1 or PHONE 2) is solidly lit when a telephone or fax has an active or registered connection to your Internet Service Provider (ISP) through the corresponding port. It flashes when the phone is being used or is off hook.
Making a Call for the First Time
To dial outside, dial the number: Long Distance (1-555-555-5555) Local Calls (555-5555 or 1-555-555-5555) To dial internally, dial the extension number: 1001 (Extension) 555 (Voicemail) 444 (Auto Attendant)
P: 888.898.8733 (Toll-Free) P: 408.687.4120 (Outside US) F: 408.980.0432
NASDAQ: EGHT www.8x8.com
2011. The 8x8, Inc. logo is a registered trademark of 8x8, Inc. 8x8, Inc. is a publicly traded company. PM365/111
Easy to install, and simple to use, the Cisco SPA2102 Phone Adapter with Router connects a standard telephone or fax machine to an IP-based data network. Voice over IP (VoIP) service providers can offer residential and business users traditional and enhanced communication services via the customer's broadband connection to the Internet. The Cisco SPA2102 features two basic telephone ports to connect existing analog phones or fax machines to a private branch exchange (PBX) system. It also includes two 100BASE-T RJ-45 Ethernet interfaces to connect to a home or office LAN, as well as an Ethernet connection to connect a broadband modem or router (WAN). Each phone line can be configured independently via software controlled by the service provider or the end user. With the SPA2102, users are able to protect and extend their investment in their existing analog telephones, conference speakerphones, and fax machines, as well as control their migration to IP with an extremely affordable, reliable solution. Installed by the end user and remotely provisioned, configured, and maintained by the service provider, each Cisco SPA2102 converts voice traffic into data packets for transmission over an IP network. Compact in design, the SPA2102 can be used in consumer and business VoIP service offerings. The SPA2102 uses international standards for voice and data networking for reliable operation.
|Device Type||VoIP phone adapter|
|Data Link Protocol||Ethernet, Fast Ethernet|
|Network / Transport Protocol||TCP/IP, UDP/IP, ICMP/IP|
|Remote Management Protocol||HTTP, HTTPS|
|Status Indicators||Port status, power|
|Features||Routing, DHCP support, NAT support, ARP support, Syslog support, DiffServ support, 256-bit encryption, firmware upgradable, SNTP support, LAN-to-LAN bridging, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), DHCP server, port forwarding|
|Encryption Algorithm||MD5, 256-bit AES|
|Compliant Standards||IEEE 802.3|
|VoIP Protocols||SIP v2|
|Voice Codecs||G.711, G.723.1, G.729a, G.726, T.38|
|Telephony Interfaces||2 phone (FXS)|
|IP Telephony Features||Voice activity detection (VAD), echo cancellation (G.168), caller ID, adaptative jitter buffer, call waiting, echo cancellation (G.165), automatic fax/modem detection and pass-through, call transfer, message waiting, gain control, DTMF generation/detection|
|Expansion / Connectivity|
|Interfaces||2 x phone line - FXS - RJ-11 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 ( WAN ) 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45|
|Cables Included||1 x network cable|
|Compliant Standards||FCC Class B certified, CE, CTR 21, ICES-003, FCC Part 15|
|Power Device||Power adapter - external|
|Voltage Required||AC 120/230 V ( 50/60 Hz )|
|Service & Support||1 year warranty|
|Service & Support Details||Limited warranty - 1 year|
|Min Operating Temperature||32 °F|
|Max Operating Temperature||113 °F|
|Humidity Range Operating||10 - 90%|
|Universal Product Identifiers|
|Part Numbers||SPA2102-NA, SPA2102-R1|
Gt Sprint SGH-G400L 530 EXC CDX-51 BAP1700-CN DS-3300 T-levo N22 2001-1 4 0 ICC20 303SI SRE 3000 900 DX Default Password AG-DVC20 K450FX Onyx 1640 IPD-3100 CDC-697 Music MX-8 CQ-FX321N XPS 600 Fortwo EL-100 DCR-DVD705 Heidleberg CD51 Factory Reset S3000 Alcatel-lucent AP70 Configuration Minor Series DVK-200 K320I Precision 420 KD-BT22 MH 555 3DE-7886R F7000N-PN Plus-FB795cp- Deluxe Translated 50600 7033 EV5 DMC-FH120 CQ-VA707N Reset WD-1080FD Automate 415 Kodak P736 ST-GT350 AXN 700 RT-56NZ23RB VGN-B1VP Abit KR7A C-701A AX1000G Mach 2 Keyboard ZDC240 Biloba 590 SD-270E DM 7025 Thinkpad X41 S-ST770 FWQ5130 Volvo C30 I845GE Cesi FCD Aficio 6110 1098 R IC-2GXE ROC1404 Edition TM-V7A Yamaha P-80 SPP-A1070 MH-685HD DV4500 Powerglide2 VN-5500PC 220 AC Firmware PV-D209 FVL328 Lightscribe Unlock XP200A 940UX L42VP01UA KV-25DS55 8662 SD DS-2102 HLS615 WP 12 14PV203 AR-5127 SH-L2AM Burgman 400 Dimage F300 Galeo 4030 351 PT GR-1100 EW3006 MG5150
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101