Reviews & Opinions
Independent and trusted. Read before buy Linksys SPA900!

Linksys SPA900

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
Linksys SPA900 - Quick Install Guide, size: 467 KB
Related manuals
Linksys SPA9000
Linksys SPA9000 Product Brochure

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Linksys SPA900Cisco MB100 Wall-Mount Bracket for Small Business IP Phones
Cisco SPA 900 Series IP Phone Mounting Bracket, MB100 Wall-mount phone bracket installs easily with phone-specific wall mounts, clearing desk space is easier than ever. This Cisco mounting bracket is simple to use. The cleats of the MB100 easily align with the holes in all Cisco SPA900 Series IP phones. The built-in tray allows easy storage for additional Wi-Fi or Power over Ethernet dongles.

Details
Brand: CISCO
Part Number: MB100

 

[ Report abuse or wrong photo | Share your Linksys SPA900 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 7. Page 1 of 1. Average Rating:
Halima Brewer 11:15am on Monday, October 25th, 2010 
"This Network Adapter is a great purchase. You can definitely see the difference between a 10/100 card and 10/100/1000 card. "Came right up to full speed (1000Mb/sec Full Duplex) on a 64 bit Debian Etch install (Linux luke 2.6.
RedRon 10:34pm on Friday, October 15th, 2010 
The product is awesome, and furthermore it is totally awesome, and it rocks and is totally awesome! Awesome product, Compact, Easily Expanded. This is a great product that Linksys put out. I bought one to try out and I went back the next day to buy a few more. Its a great buy! Compact.
bobik1 2:42pm on Thursday, August 5th, 2010 
"My motherboard network card was creating problems for me. I had to unplug the network cord to boot up my system. Anyway, I picked up this card.
arshadnoor 2:18pm on Tuesday, July 20th, 2010 
Nice form factor... no WPA This product is a miss. Designed to wirelessly connect VOIP phones to a network it does not support WPA Enterprise.
shumiyao 3:39am on Friday, May 28th, 2010 
Easy Installation. It actually worked with my "smartphone", treo 700wx. Numerous options- printer. Glad I ordered it Easy everything, read instructions, followed instructions.
owa 3:03pm on Wednesday, May 26th, 2010 
my toshiba laptop has built in blue tooth but with the nexiq boxes(communication adaptors) it was to slow and didnt allow for the distance needed. I formally had a discontinued 3Com card that was factory installed.
moude 3:29am on Wednesday, May 26th, 2010 
Ethernet by Cisco-Linksys The product is excellent..I was attempting a configuration to isolate the DSL Modem and then operate a 2-PC Network.. Does what I thought it would. However.... I knew from reading the reviews that an XP machine would be needed to configure.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Managing Linksys 900 Series IP Phones Using the LCD Display 3-1 LCD Display Controls 3-1
Using Soft Keys 3-3 Entering and Saving Settings Localization
Changing the Display Background (SPA962) Call Appearances and Extensions Line Key LEDs

3-9 3-8

Using Call Features 3-10 Selecting the Audio I/O Device and Line 3-11 Making Calls 3-11 Answering and Ending Calls 3-12 Hold and Resume 3-12 Call Waiting 3-12 Speed Dialing 3-13 Three-Way Conferencing 3-13 Attended Call Transfer 3-13 Blind Call Transfer 3-14 Call Back 3-14 Message Waiting Indication (MWI) 3-14 Accessing Voicemail 3-15 Muting Calls 3-15 Shared Call Appearances 3-15 Personal Directory 3-15 Caller and Called Name Matching 3-16 Dialing Assistance 3-16 Supplementary Services 3-16 Call Logs 3-17 Audio Volume Adjustment 3-18 Managing Ring Tones 3-19 Configuring a Dial Plan 3-20 Dial Plan Digit Sequences 3-20 Dial Plan Rules 3-21 Digit Sequence Syntax 3-21 Element Repetition 3-21 Sub-sequence Substitution 3-21 Intersequence Tones 3-22 Number Barring 3-22 Interdigit Timer Master Override 3-22 Local Timer Overrides 3-22 Pause 3-22
Dial Plan Examples 3-23 Dial Plan Timers 3-23 Interdigit Long Timer 3-24 Interdigit Short Timer 3-24 Dial Plans 3-24 System Administration 3-24 Reboot and Restart 3-25 Factory Reset 3-25 Password Protection 3-25 Managing the Time/Date 3-25 Daylight Saving Time 3-25 Using Star Codes to Activate/Deactivate Services Disabling Services 3-28 Error and Log Reporting 3-29 Troubleshooting FAQ
LCD Command Reference Guide
1 Directory 4-2 Entering Names and Numbers into the Directory 4-2 Entering Directory Names, Numbers and Ring Default 4-Speed Dial
3 Call History 4-3 Redial List 4-3 Answered Calls 4-4 Missed Calls 4-Ring Tone
5 Preferences 4-4 5.1 Block Caller ID 4-5 5.2 Block Anonymous Call 4-5 5.3 Do Not Disturb 4-5 5.4 Secure Call 4-5 5.5 Dial Assistance 4-6 5.6 Preferred Audio Device 4-Call Forward 4-6 6.1 CFWD All Number 4-6 6.2 CFWD Busy Number 4-6 6.3 CFWD No Ans Number 4-7 6.4 CFWD No Ans Delay 4-Time/Date

8 Voice Mail

9 Network 4-8 9.1 DCHP 4-8 9.2 Current IP Address 4-8 9.3 Host Name 4-9 9.4 Domain 4-9 9.5 Current NetMask 4-9 9.6 Current Gateway 4-9 9.7 Enable Web Server 4-9 9.8 Non DHCP IP Address 4-10 9.9 Non DHCP Subnet Mask 4-10 9.10 Non DHCP Default Route 4-10 9.11 Non DHCP DNS 1 4-10 9.12 Non DHCP DNS 2 4-10 9.13 Non DHCP NTP Server 1 4-10 9.14 Non DHCP NTP Server 2 4-Product Info 4-11 10.1 Product Name 4-11 10.2 Serial Number 4-11 10.3 Software Version 4-11 10.4 Hardware Version 4-12 10.5 MAC Address 4-12 10.6 Client Cert 4-Status 4-12 Phone 4-12 Ext 1/2/3/4 4-13 Line 1, 2,3,4 4-Reboot 13 Restart

The following documentation describes how to use other Linksys Voice System products:

Technical Support

If you are an end user of LVS products and need technical support, contact the reseller or Internet telephony service provider (ITSP) that supplied the equipment. Technical support contact information for authorized Linksys Voice System partners is as follows:
LVS Phone Support (requires an authorized partner PIN) 888 333-0244 Hours: 4am-6pm PST, 7 days a week E-mail support voipsupport@linksys.com
Preface Technical Support

C H A P T E R

Introducing Linksys 900 Series IP Phones
This guide describes the administration and use of Linksys analog telephone adapters (ATAs). This chapter introduces the functionality of the Linksys 900 Series IP phones and includes the following sections:
Overview, page 1-2 Feature Descriptions, page 1-8 Technology Background, page 1-12 Where to Go From Here, page 1-16

Overview

Table 1-1 summarizes the ports and features provided by the Linksys 900 Series IP phones described in this document.
Table 1-1 Linksys SPA900 Series IP Phones
Product Name RJ-45 SPA901 SPA921 SPA922 SPA941 SPA942 SPA962 One (1) One (1) Two (2) One (1) Two (2) Two (2)
Ethernet (LAN) Voice Lines One (1) One (1) One (1) Four (4) Four (4) Six (6)
Additional Features/Notes Small, affordable, no display One-line business phone Power over Ethernet (PoE) support Default is 2-lines active, upgradeable Default is 2-lines active, upgradeable. Power over Ethernet (PoE) support Six lines, hi-res color display
PoE units (SPA922, SPA942, and SPA962) do not come with an external power adapter. The PA100 power supply must be ordered separately if you are not using a PoE switch.
Chapter 1 SPA900 Series Features
Figure 1-1 illustrates how the IP phones are connected in a VoIP network, including the SPA3102, which acts as a SIP-PSTN gateway. As shown, the RTP400 and WRTP54G provide QoS-enabled IP routers in addition to two ports for connecting analog telephone devices.

Preferences Call Forward Network Speed Dialing

Localization

This section applies to the following SPA900 Series IP Phones:

SPA922 SPA942 SPA962

This section describes how to localize the IP phone display language for these models, referred to in this section as SPA9x2 phones. SPA9x2 phones support setting an alternative language on the user display. The administrator or service provider defines up to nine languages, in addition to English, to be made available and hosts the dictionaries for each of the languages on the HTTP or TFTP provisioning server. Language support follows Cisco dictionary principles. The paragraphs describe parameters that can be defined in the SPA9x2 configuration file.
Dictionary server scriptThis parameter is used to define the location of the dictionary server, the languages available and the associated dictionary. The syntax is as follows:
<Dictionary_Server_Script ua="na"> </Dictionary_Server_Script>
The default is blank and the maximum number of characters is 512. The detailed format is as follows:
serv={server ip port and root path}; d0=<language0>;x0=<dictionary0 filename>; d1=<language1>;x1=<dictionary1 filename>; d2=<language2>;x2=<dictionary2 filename>; d3=<language3>;x3=<dictionary3 filename>; d4=<language4>;x4=<dictionary4 filename>;
Managing Linksys 900 Series IP Phones Localization d5=<language5>;x5=<dictionary5 d6=<language6>;x6=<dictionary6 d7=<language3>;x7=<dictionary7 d8=<language8>;x8=<dictionary8 d9=<language5>;x9=<dictionary9 filename>; filename>; filename>; filename>; filename>;
The following is an example value:
<Dictionary_Server_Script ua="na"> serv=tftp://192.168.1.119/;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.xml </Dictionary_Server_Script>
Language SelectionThis parameter is used to select the default language. Its value needs to match one of the languages supported by the dictionary server. The script (dx value) is as follows:
<Language_Selection ua="na"> </Language_Selection>
The default is blank and the maximum number of characters is 512. The following is an example:
<Language_Selection ua="na"> Spanish </Language_Selection>

The 900 Series phone supports shared call appearances in association with a Broadsoft application server. An extension can be shared by two or more stations. All call appearances on a shared extension are shared. At any given time, each station sharing a call appearance can monitor the state of the call appearance. A station can select a share call appearance to make a call only if the call appearance is not being used by another station. All stations ring on an inbound call to the shared call appearance extension. Whoever picks up the call first takes the call. When a call is placed on hold by one station, it can be resumed from another station sharing the same call appearance.

Personal Directory

A directory entry consists of the following information:
Name Phone number or (SIP) URL Ring Tone
Up to 100 entries can be stored in the 900 Series phone. An entry can be added or edited from the phone GUI or on the web page or through remote provisioning. To do this from the web page or through remote provisioning, you specify the value as a DirEntry script. To view or edit the personal directory via the phone web interface, use the link http://ip_address/pdir.htm The user can invoke the Directory menu on the phone in 2 ways:
Press the Menu button and select Directory Press dir when not already in a Menu display
The user can add a new entry to the Directory by selecting the New Entry option (the first item) on the Directory menu and press add. To modify or delete an existing item, highlight the corresponding entry and press edit or del. When trying to delete an entry, the phone prompts the user for confirmation before proceeding. The user can copy an existing directory entry to create a new entry. To do this, high light the entry you want to copy and press copy. Then highlight the New Entry option and press paste. The user can edit the new entry and then press save to save the entry. The user can also save a call log entry into the directory. To do this, select a call log entry and press save. Then edit the entry if needed, and press save to save the new entry in the directory.

Q. Why are voice calls of poor sound quality? A. The source of this issue is often one of the following two issues:
The phone or call controller may have been configured improperly. The transport network has performance issues.
To troubleshoot this problem, gather the following information: Identify when and where the issue occurred. Look at the Redial List (calls that the user made) by pressing Menu, 3, 1, and write down the calls that were affected. Then look at the Answered Calls by pressing Menu, 3, 2, and write down the calls that were affected. Identify the type of voice quality issue (for example, part of the conversation is dropped, excessive echo, unclear or garbled speech, one way conversation, or low volume)
Get the current IP address of the phone by pressing Menu, 9, 2. Contact the network administrator or service provider. Be prepared to provide the call log information, the voice quality issue type, the current IP address and registration status (Registered, Not Registered).
This chapter provides a systematic reference for the configuration and monitoring options available from the LCD display of SPA900 Series IP phones. All models provide an LCD display except for the SPA901. The SPA901 uses the Interactive Voice Response (IVR) interface, described in the Using the Interactive Voice Response Interface section on page 2-16. This chapter includes the following sections:
1 Directory, page 4-Speed Dial, page 4-Call History, page 4-Ring Tone, page 4-Preferences, page 4-Call Forward, page 4-Time/Date, page 4-Voice Mail, page 4-Network, page 4-Product Info, page 4-Status, page 4-Reboot, page 4-Restart, page 4-Factory Reset, page 4-Set Password, page 4-Set LCD Contrast, page 4-CallPark Status, page 4-Language (SPA922, 942, and 962), page 4-16

Chapter Directory

1 Directory
The directory stores the list of the phone numbers and names. This section describes how to enter and save phone numbers and names into the directory. It includes the following sections:
Entering Names and Numbers into the Directory, page 4-2 Entering Directory Names, Numbers and Ring Default, page 4-2
Entering Names and Numbers into the Directory
Shortcut: Menu, 1, add, name, scroll down, number, scroll down or save
To enter the Directory option, press the Menu button and then press the 1 button. Alternatively, you may press the Menu button and the Directory option is highlighted. Then press the select soft key. After pressing select, the menu displays New Entry and existing entries in the directory below. To add a New Entry, press the add button, (left soft key). To cancel, press the cancel soft key. After pressing the add button, the menu shows the Name, Number, and Ring Default with the cursor flashing in the first character of the Name area.

LCD Command Reference Guide 9 Network
Receive the address from a DHCP server by enabling DHCP (Option 9.1) Manually set the address using the Non DHCP IP Address option (Option 9.8)

9.3 Host Name

Shortcut: Menu, 9, 3 save
The Host Name is set by the administrator. The user cannot change the setting.To view the Host Name, press 3 from the Network menu, or scroll down to Host Name and press the select soft key.

9.4 Domain

Shortcut: Menu, 9, 4 save
The Domain Name displays the name of the domain in which the phone is operating and is not user configurable. To view the Domain, press 4 from the Network menu, or scroll down to highlight Domain and press select.

9.5 Current NetMask

Shortcut: Menu, 9, 5 save
To view the Current NetMask, press 5 from the Network menu, or scroll down to highlight NetMask and press the select soft key. The Current NetMask is set in one of the following ways:
Receive the address from a DHCP server by enabling DHCP (option 9.1) Manually set the address using the Non DHCP Subnet Mask option (Option 9.9)

9.6 Current Gateway

Shortcut: Menu, 9, 6 save
To view the Current Gateway, press 6 on the Network menu, or scroll down to highlight Current Gateway and press the select soft key. The Current Gateway is set in one of the following ways:
Receive the address from a DHCP server (the user cannot edit it) Manually set the address using the Non DHCP Default Route option (Option 9.10)

9.7 Enable Web Server

Shortcut: Menu, 9, 7, y/n, ok
To view the status of the Web Server, press 7 from the Network menu, or scroll down to highlight Enable Web Server and press the select soft key. To enable or disable the Web Server, press the edit soft key. Press the y/n soft key to toggle between Yes to No and press ok.

9.8 Non DHCP IP Address

Shortcut: Menu, 9, 8, ip_address, ok
To manually set the IP address, press 8 from the Network menu, or scroll down to highlight Non DHCP IP Address and press the select soft key. Then press the edit soft key. The display shows the option to enter an IP address. enter the IP address here. This IP address is always used by the phone (it is a static IP address). After entering IP address, press ok.

17 CallPark Status

Shortcut: menu, 17
This option lets the user display the status of the CallPark feature. When this option is selected, the LCD displays the Requesting CallPark Status message. The LCD then displays the CallPark Status or displays the Request CallPark Status Failed message and the request is retried. To cancel the request press Cancel.
Shortcut: menu, 18, Edit, Option, OK, Save
This option is available only with Release 5.1.4 or later of the SPA922, SPA942, and SPA962. This option lets the user change the language of the phone from the user menu. To change the language, the user performs the following steps:
LCD Command Reference Guide 18 Language (SPA922, 942, and 962)
Dictionaries are currently available for the following languages:
English Spanish German, Dutch Italian French Portuguese Danish Swedish Czech Slovak
For information about configuring the languages available to the user through the LCD menu, refer to theLocalization section on page 3-6.
Chapter Language (SPA922, 942, and 962)
SPA900 Series Phone Field Reference
This chapter describes the fields within each section of the following administration web server pages:
Info Tab, page 5-1 System Tab, page 5-5 SIP Tab, page 5-8 Regional Tab, page 5-17 Ext 1/2/3/4/5/6 Tab, page 5-36 Phone Tab, page 5-31 Ext 1/2/3/4/5/6 Tab, page 5-36 User Tab, page 5-48
For information about the Provisioning tab, see the Linksys SPA Provisioning Guide.

Info Tab

This section describes the fields for the following headings on the Info tab:
System Information, page 5-1 Product Information, page 5-2 Phone Status, page 5-2
The fields on this tab are read-only and cannot be edited.

Chapter 5 Info Tab

System Information
Field DHCP Current IP Host Name Domain Current Netmask Current Gateway Primary DNS Secondary DNS Description Indicates if DHCP is enabled. Displays the current IP address assigned to the 900 Series phone. Displays the current IP address assigned to the 900 Series phone. Displays the network domain name of the 900 Series phone. Displays the network mask assigned to the 900 Series phone. Displays the default router assigned to the 900 Series phone. Displays the primary DNS server assigned to the 900 Series phone. Displays the secondary DNS server assigned to the 900 Series phone.

<Dictionary_Server_Script ua="na"> serv=tftp://192.168.1.119/;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101. xml </Dictionary_Server_Script>

Language Selection

Specifies the default language. The value needs to match one of the languages supported by the dictionary server. The script (dx value) is as follows:

Caller ID Method

The following choices are available:
Bellcore (N.Amer,China)CID, CIDCW, and VMWI. FSK sent after first ring (same as ETSI FSK sent after first ring) (no polarity reversal or DTAS). DTMF (Finland, Sweden)CID only. DTMF sent after polarity reversal (and no DTAS) and before first ring. DTMF (Denmark)CID only. DTMF sent after polarity reversal (and no DTAS) and before first ring. ETSI DTMFCID only. DTMF sent after DTAS (and no polarity reversal) and before first ring. ETSI DTMF With PRCID only. DTMF sent after polarity reversal and DTAS and before first ring. ETSI DTMF After RingCID only. DTMF sent after first ring (no polarity reversal or DTAS). ETSI FSKCID, CIDCW, and VMWI. FSK sent after DTAS (but no polarity reversal) and before first ring. Waits for ACK from CPE after DTAS for CIDCW. ETSI FSK With PR (UK)CID, CIDCW, and VMWI. FSK is sent after polarity reversal and DTAS and before first ring. Waits for ACK from CPE after DTAS for CIDCW. Polarity reversal is applied only if equipment is on hook.
The default is Bellcore(N.Amer, China). Caller ID FSK Standard The 900 Series phone supports bell 202 and v.23 standards for caller ID generation. Select the FSK standard you want to use, bell 202 or v.23. The default is bell 202. Feature Invocation Method Select the method you want to use, Default or Sweden default. (Not in PAP2T) The default is Default.
SPA900 Series Phone Field Reference Phone Tab

Phone Tab

This section describes the fields for the following headings on the Phone tab: General, page 5-32 Line Key 1/2/3/4/5/6, page 5-32 Miscellaneous Line Key Settings, page 5-32 Line Key LED Pattern, page 5-33 Supplementary Services, page 5-34 Ring Tone, page 5-35 Auto Input Gain (dB), page 5-35 Background Picture (SPA 962), page 5-36

General

Field Station Name Voice Mail Number Text Logo Description A name to identify this station (reserved for future use). A phone number or URL to check voicemail. Sets the text logo to display when the phone boots up. Default is (blank) which displays Linksys. Up to 2 lines of text can be setup; each line should contain less than 32 characters. A newline character (\n) must be inserted between the 2 lines and escaped with %0a. For example, Super%0aTelecom.

Chapter 5 Ext 1/2/3/4/5/6 Tab

Ext 1/2/3/4/5/6 Tab

This section describes the fields for the following headings on the Ext 1 and Ext 2 tabs:
General, page 5-36 Share Line Appearance, page 5-36 NAT Settings, page 5-37 Network Settings, page 5-37 SIP Settings, page 5-38 Subscriber Information, page 5-43 Dial Plan, page 5-45
In a configuration profile, the Line parameters must be appended with [1] or [2] to identify the line to which the setting applies.
Field Line Enable Description To enable this line for service, select yes. Otherwise, select no. The default is yes.

Share Line Appearance

Field Share Ext Description Indicates whether this extension is to be shared with other stations or private. If the extension is not shared, then a call appearance assigned to this extension is not shared, regardless the setting of <Share Call Appearance> for that call appearance. If the extension is shared, then whether or not a call appearance assigned to this extension is shared follows the setting of <Share Call Appearance> for that call appearance. The choices are shared or private. The default is shared. Shared User ID Subscription Expires The user identified assigned to the shared line appearance. The subscription time with the SIP proxy (SPA9000). The default is 3600 seconds.
SPA900 Series Phone Field Reference Ext 1/2/3/4/5/6 Tab

NAT Settings

Field NAT Mapping Enable Description To use externally mapped IP addresses and SIP/RTP ports in SIP messages, select yes. Otherwise, select no. The default is no. NAT Keep Alive Enable To send the configured NAT keep alive message periodically, select yes. Otherwise, select no. The default is no. NAT Keep Alive Msg
Enter the keep alive message that should be sent periodically to maintain the current NAT mapping. If the value is $NOTIFY, a NOTIFY message is sent. If the value is $REGISTER, a REGISTER message without contact is sent. The default is $NOTIFY. Destination that should receive NAT keep alive messages. If the value is $PROXY, the messages are sent to the current or outbound proxy. The default is $PROXY.

NAT Keep Alive Dest

Network Settings
Field SIP ToS/DiffServ Value Description TOS/DiffServ field value in UDP IP packets carrying a SIP message. The default is 0x68. SIP CoS Value [0-7] CoS value for SIP messages. The default is 3. RTP ToS/DiffServ Value ToS/DiffServ field value in UDP IP packets carrying RTP data. The default is 0xb8. RTP CoS Value [0-7] CoS value for RTP data. The default is 6. Network Jitter Level Determines how jitter buffer size is adjusted by the 900 Series phone. Jitter buffer size is adjusted dynamically. The minimum jitter buffer size is 30 milliseconds or (10 milliseconds + current RTP frame size), whichever is larger, for all jitter level settings. However, the starting jitter buffer size value is larger for higher jitter levels. This setting controls the rate at which the jitter buffer size is adjusted to reach the minimum. Select the appropriate setting: low, medium, high, very high, or extremely high. The default is high.

Jitter Buffer Adjustment

Controls how the jitter buffer should be adjusted. Select the appropriate setting: up and down, up only, down only, or disable. The default is up and down.

SIP Settings

Field SIP Transport Description Transport type used for SIP messages. The options are UDP, TCP, or TLS. The default is UDP. SIP Port Port number of the SIP message listening and transmission port. The default is 5060. SIP 100REL Enable To enable the support of 100REL SIP extension for reliable transmission of provisional responses (18x) and use of PRACK requests, select yes. Otherwise, select no. The default is no. EXT SIP Port Auth Resync-Reboot The external SIP port number. If this feature is enabled, the 900 Series phone authenticates the sender when it receives the NOTIFY resync reboot (RFC 2617) message. To use this feature, select yes. Otherwise, select no. The default is yes. SIP Proxy-Require The SIP proxy can support a specific extension or behavior when it sees this header from the user agent. If this field is configured and the proxy does not support it, it responds with the message, unsupported. Enter the appropriate header in the field provided. To use the Remote-Party-ID header instead of the From header, select yes. Otherwise, select no. The default is yes. SIP GUID The Global Unique ID is generated for each line for each device. When it is enabled, the 900 Series phone adds a GUID header in the SIP request. The GUID is generated the first time the unit boots up and stays with the unit through rebooting and even factory reset. This feature was requested by Bell Canada (Nortel) to limit the registration of SIP accounts. The default is yes.

SIP Remote-Party-ID

SIP Debug Option
SIP messages are received at or sent from the proxy listen port. This feature controls which SIP messages to log. Choices are as follows:
noneNo logging. 1-lineLogs the start-line only for all messages. 1-line excl. OPTLogs the start-line only for all messages except OPTIONS requests/responses. 1-line excl. NTFYLogs the start-line only for all messages except NOTIFY requests/responses. 1-line excl. REGLogs the start-line only for all messages except REGISTER requests/responses. 1-line excl. OPT|NTFY|REGLogs the start-line only for all messages except OPTIONS, NOTIFY, and REGISTER requests/responses. fullLogs all SIP messages in full text. full excl. OPTLogs all SIP messages in full text except OPTIONS requests/responses. full excl. NTFYLogs all SIP messages in full text except NOTIFY requests/responses. full excl. REGLogs all SIP messages in full text except REGISTER requests/responses. full excl. OPT|NTFY|REGLogs all SIP messages in full text except for OPTIONS, NOTIFY, and REGISTER requests/responses.
The default is none. RTP Log Intvl Restrict Source IP The interval for the RTP log. If Lines 1 and 2 use the same SIP Port value and the Restrict Source IP feature is enabled, the proxy IP address for Lines 1 and 2 is treated as an acceptable IP address for both lines. To enable the Restrict Source IP feature, select yes. Otherwise, select no. If configured, the PAP2T will drop all packets sent to its

SIP Ports originated from an untrusted IP address. A source IP address is untrusted if it does not match any of the IP addresses resolved from the configured <Proxy> (or <Outbound Proxy> if <Use Outbound Proxy> is yes).
The default is no. Referor Bye Delay Controls when the 900 Series phone sends BYE to terminate stale call legs upon completion of call transfers. Multiple delay settings (Referor, Refer Target, Referee, and Refer-To Target) are configured on this screen. For the Referor Bye Delay, enter the appropriate period of time in seconds. The default is 4. Refer Target Bye Delay For the Refer Target Bye Delay, enter the appropriate period of time in seconds. The default is 0.

Referee Bye Delay

For the Referee Bye Delay, enter the appropriate period of time in seconds. The default is 0.

Refer-To Target Contact

To contact the refer-to target, select yes. Otherwise, select no. The default is no.

Sticky 183

If this feature is enabled, the IP telephony ignores further 180 SIP responses after receiving the first 183 SIP response for an outbound INVITE. To enable this feature, select yes. Otherwise, select no. The default is no.

Auth INVITE

When enabled, authorization is required for initial incoming INVITE requests from the SIP proxy.

Call Feature Settings

Field Blind Attn-Xfer Enable Description Enables the 900 Series phone to perform an attended transfer operation by ending the current call leg and performing a blind transfer of the other call leg. If this feature is disabled, the 900 Series phone performs an attended transfer operation by referring the other call leg to the current call leg while maintaining both call legs. To use this feature, select yes. Otherwise, select no. The default is no. MOH Server User ID or URL of the auto-answering streaming audio server. When only a user ID is specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the MOH Server is not specified. Indicates whether the Message Waiting Indicator on the phone is lit. This parameter is toggled by a message from the SIP proxy to indicate if a message is waiting. The default is No. Auth Page Specifies whether to authenticate the invite before auto answering a page. The Auto Answer Page parameter, on the Supplementary Services section of the User tab, is set to Yes by default. The default is No. Default Ring Auth Page Realm Type of ring heard. This corresponds to the Ring Tone on the Phone tab. Identifies the Realm part of the Auth that is accepted when the Auth Page parameter is set to Yes. This parameter accepts alphanumeric characters.

Message Waiting

Conference Bridge URL Auth Page Password
This is the URL used to join into a conference call, generally in the form of the word conference or user@IPaddress:port Identifies the password used when the Auth Page parameter is set to Yes. This parameter accepts alphanumeric characters.

The default is blank. Cfwd No Ans Delay Delay in sec before Call Forward No Answer triggers. Same as Cfwd All Dest. The default is 20.

Chapter 5 User Tab

Speed Dial
Field Speed Dial 2/3/4/5/6/7/8/9 Description Target phone number (or URL) assigned to speed dial 2, 3, 4, 5, 6, 7, 8, or 9. The default is blank.
The 900 Series phone provides native support of a large set of enhanced or supplementary services. All of these services are optional. The parameters listed in the following table are used to enable or disable a specific supplementary service. A supplementary service should be disabled if a) the user has not subscribed for it, or b) the Service Provider intends to support similar service using other means than relying on the 900 Series phone. Field CW Setting Description Enables or disables call waiting. The default is Yes. Block CID Setting Block Caller ID on/off for all calls. The default is no. Block ANC Setting Block Anonymous Calls on or off. The default is no. DND Setting DND on or off. The default is no. Secure Call Setting If yes, all outbound calls are secure calls by default. The default is no. Dial Assistance Auto Answer Page Preferred Audio Device If enabled, the phone LCD displays a list of up to 10 matching numbers as the user presses each key on the numeric keypad. If enabled, the phone automatically picks up a call and directs the audio signal to the speakerphone without user intervention. Specifies the preferred audio device (Speaker or Headset). When set to Speaker, the user can enable the headset using the Preferences > Preferred Audio Device (Menu 5,6) option. When set to Headset, the same option is used to enable the speakerphone. If enabled, when the user is using the handset, the audio from the remote end will be played out on the speaker in addition to the handset (so that a supervisor and listen in).

Send Audio to Speaker

Field Time Format Date Format Miss Call Shortcut Accept Media Loopback Request
Description Toggles the LCD display between a 12-hour and 24-hour clock. Changes the order in which month and day are displayed. Enables or disables the display of missed calls on the LCD display. Determines how the media loopback request is enabled. Choose automatic, never, or manual. The default is automatic.
Media Loopback Mode Media Loopback Type
Determines the media loopback mode. Choose source or mirror. Determines the media loopback type. Choose media or packet.

Audio Volume

Field Ringer Volume Speaker Volume Handset Volume Headset Volume Lcd Contrast Description Sets the default volume for the ringer. Sets the default volume for the speakerphone. Sets the default volume for the handset. Sets the default volume for the headset. Sets the default contrast setting for the LCD display.
Phone GUI Menu Color Settings (SPA962)
Field Color Scheme Description Select the color scheme for the color LCD display on the SPA962. The choices are Silver, Light Blue, Light Green, or Pink. The default is Silver.

A P P E N D I X

Acronyms
A/D ANC B2BUA Bool CA CAS CDR CID CIDCW CNG CPC CPE CWCID CWT D/A dB dBm DHCP DNS DRAM DSL DSP DTAS DTMF FQDN FSK FXS Analog To Digital Converter Anonymous Call Back to Back User Agent Boolean Values. Specified as yes and no, or 1 and 0 in the profile Certificate Authority CPE Alert Signal Call Detail Record Caller ID Call Waiting Caller ID Comfort Noise Generation Calling Party Control Customer Premises Equipment Call Waiting Caller ID Call Waiting Tone Digital to Analog Converter decibel dB with respect to 1 milliwatt Dynamic Host Configuration Protocol Domain Name Server Dynamic Random Access Memory Digital Subscriber Loop Digital Signal Processor Data Terminal Alert Signal (same as CAS) Dual Tone Multiple Frequency Fully Qualified Domain Name Frequency Shift Keying Foreign eXchange Station

Appendix A

GW ITU HTML HTTP HTTPS ICMP IGMP ILEC IP ISP ITSP IVR LAN LBR LBRC MC MGCP MOH MOS ms MSA MWI OSI PCB PR PS PSQM PSTN NAT OOB REQT RESP RSC RTP RTT SAS SDP
Gateway International Telecommunication Union Hypertext Markup Language Hypertext Transfer Protocol HTTP over SSL Internet Control Message Protocol Internet Group Management Protocol Incumbent Local Exchange Carrier Internet Protocol Internet Service Provider IP Telephony Service Provider Interactive Voice Response Local Area Network Low Bit Rate Low Bit Rate Codec Mini-Certificate Media Gateway Control Protocol Music On Hold Mean Opinion Score (1-5, the higher the better) Millisecond Music Source Adaptor Message Waiting Indication Open Switching Interval Printed Circuit Board Polarity Reversal Provisioning Server Perceptual Speech Quality Measurement (1-5, the lower the better) Public Switched Telephone Network Network Address Translation Out-of-band (SIP) Request Message (SIP) Response Message (SIP) Response Status Code, such as 404, 302, 600 Real Time Protocol Round Trip Time Streaming Audio Server Session Description Protocol
SDRAM sec SIP SLA SLIC SP SPA SSL TFTP TCP UA uC UDP URL VM VMWI VQ WAN XML
Synchronous DRAM seconds Session Initiation Protocol Shared line appearance Subscriber Line Interface Circuit Service Provider Linksys Phone Adaptor Secure Socket Layer Trivial File Transfer Protocol Transmission Control Protocol User Agent Micro-controller User Datagram Protocol Uniform Resource Locator Voicemail Visual Message Waiting Indication/Indicator Voice Quality Wide Area Network Extensible Markup Language

doc1

Quick Installation
Wall Mount Bracket for Linksys SPA900 Series IP Phones
Mounting Bracket for Linksys IP Phones
Enables a phone to be mounted on a wall
Convenient tray to hold optional Wi-Fi or PoE dongle
Universal design fits all Linksys SPA900 Series IP Phones
To attach the Mounting Bracket (MB), align the two cleats on the MB with the holes in the phones base. Orient the MB such that the phones Ethernet and handset ports are accessible after installation.
Linksys A Division of Cisco Systems, Inc. 121 Theory Drive Irvine, CA 926127USA E-mail: sales@linksys.com support@linksys.com Web:http://www.linksys.com
Push the MB onto the phones base. Slide the MB upwards to lock it in place.
If a Wi-Fi or PoE dongle is installed (optional), place in the tray.
Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at www.linksys.com.
Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.

MB100-QI-61130NC LH

Plug in the Ethernet and power cables.
Hang onto screws mounted in the wall. Model No.

 

Tags

SC230 MS-6577 GC4411 RD-30 303si LAC-M1600 295LM-lm295b-ra- BM350 PDP-32H1A CS-761APF Poster Back WV-CP650 Muratec M800 Software 522 C Inspiron 3700 KH4000 KP-41PZ1E Thinkpad R50E FE-360 PDV-70X Router Rt4MD CZ509ER Digimax I5 L62640L KX-TG1311NL Roadster NAD C422 CX-DP9060 KX-TG1311FR Speed 2100 Roland W-30 Vega 6000 F8400N-WN Clipso Satellite 1620 410-HPC AAM6000UG-a1 ZKG5540XFN Touch 155 Colour Emachines RT37mass MKS-80 E2320 VR686 MZ-N505 Bridge DSC-W350 L VGN-FE KX-TG2267 NAP 110 Valve Review Polaroid T831 RX-396 KDC-BT60U Volvo V40 LP820 S9110 Tornado MP-CS120 Optio E85 UN55B7000WF B8800 RC400 PF391 HT-C5200 P-touch 1950 DSC-F55V HS102G P5LD2-VM CB593 R1043 PRO 3885 Eureka 4870 KDL-40E4020 Powerset Alesis AI-1 D-copia 55 DTH250E PW-AT760 PT-20 EMP-750 ST-61 ROC 8505 MG16-6FX Football 2004 X-760 8240XL 1000 S DMR-EX78 Dsl 50 82663 NWZ-S544PNK SU-V50 UE40B6000VP Ultra2 Printer AVH-P5250BT

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101