Linksys WRT54G2, size: 12.4 MB
Linksys WRT54G2 Quick Installation Guide
Linksys WRT54G2 Datasheet
Here you can find all about Linksys WRT54G2 like manual and other informations. For example: reset, password, review, default password, setup, v1, firmware.
Linksys WRT54G2 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Linksys WRT54G2 please write about it to help other people.
[ Report abuse or wrong photo | Share your Linksys WRT54G2 photo ]
Linksys WRT54G2 Wireless G Router
User reviews and opinions
|wmcduff||4:10pm on Monday, October 25th, 2010|
|I bought my router in May. Up until about two weeks ago, I had no problem. Then, I lost my connection. I upgraded from a Linksys 802.11b because it was too slow with the new "Vista" and it could no longer be updated. I upgraded from a Trendnet after being frustrated with it for a month and difference was amazing. The linksys set up was great and works flawlessly.|
|lera||8:12am on Saturday, September 4th, 2010|
|I have owned this router for more than 2 years and have never had a single issue with it...|
|becatlibra||12:56pm on Wednesday, August 25th, 2010|
|i bought this from best buy and figured i give a warning about this issue to some other people works well for most people if you have more than 2 wal...|
|drpop||3:56pm on Saturday, June 12th, 2010|
|Linksys by Cisco WRT160N router elegant, slim shape of the flow line. Designed in line with the current entertainment and home office SOHO fashion.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Surf, work, or play without running wires
#1 choice for wireless networking worldwide Connect multiple computers to your broadband Internet Safe and secure wireless and Internet connections Linksys EasyLink Advisor (LELA) Get up and running in minutes
Wireless-G Broadband Router
The Linksys Wireless-G Broadband Router is really three devices in one box. First, theres the Wireless Access Point, which lets you connect both screaming fast Wireless-G (802.11g at 54Mbps) and Wireless-B (802.11b at 11Mbps) devices to the network. Theres also a built-in 4-port full-duplex 10/100 Switch to connect your wired-Ethernet devices together. Connect four PCs directly, or attach more hubs and switches to create as big a network as you need. Finally, the Router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection. Once your computers are connected to the Router and the Internet, they can communicate with each other too, sharing resources and files. All your computers can print on a shared printer connected anywhere in the house. And your computers can share all kinds of filesmusic, digital pictures, and documents. Keep all your digital music on one computer, and listen to it anywhere in the house. Organize all of your familys digital pictures in one place, to simplify finding the ones you want, and easing backup to CD-R. Utilize extra free space on one computer when anothers hard drive starts to fill up. The new Wi-Fi Protected Setup feature makes it easy to configure your wireless devices. Just push the button on the Router and on your other Wi-Fi Protected Setupenabled wireless device to automatically create a WPA2 connection that protects your data and privacy with up to 256-bit industrial-strength encryption. The Router can serve as a DHCP Server, has a powerful SPI firewall to protect your PCs against intruders and most known Internet attacks, supports VPN pass-through, and can be configured to filter internal users access to the Internet. Advanced configuration is a snap with the web browser-based interface. With the Linksys Wireless-G Broadband Router at the center of your home or office network, you can share a high-speed Internet connection, files, printers, and multiplayer games with flexibility, speed, security and simplicity!
All-in-one Internet-sharing Router, 4-port Switch, and Wireless-G (802.11g) Access Point Shares a single Internet connection and other resources with Ethernet wired and Wireless-G and -B devices Push button setup feature makes wireless configuration secure and simple High security: Wi-Fi Protected Access 2 (WPA2), wireless MAC address filtering, powerful SPI firewall
Specifications Model Standards Ports Buttons LEDs Cabling Type Number of Antennas Detachable (y/n) RF Power (EIRP) in dBm UPnP able/cert Security Features Security Key Bits Environmental Dimensions Weight Power Certification Operating Temp. Storage Temp. Operating Humidity Storage Humidity WRT54G2 IEEE 802.3, IEEE 802.3u, IEEE 802.11g, IEEE 802.11b Internet: One 10/100 RJ-45 Port LAN: Four 10/100 RJ-45 Switched Ports One Power Port One Reset Button One WPS Button Power, Wireless, LAN (1-4), Internet, Wi-Fi Protected Setup (WPS) CATInternal Antennas No 18 dBm Yes Stateful Packet Inspection (SPI) Firewall, Internet Policy Wi-Fi Protected Access 2 (WPA2), WEP, Wireless MAC Filtering 7.99" x 1.38" x 6.3" (203 x 35 x 160 mm) 9.88 oz (0.28 kg) External, 12V DC, 0.5A FCC, UL, CE, Wi-Fi (802.11b, 802.11g), WPA2, WMM 32 to 104F (0 to 40C) -4 to 140F (-20 to 60C) 10 to 85%, Noncondensing 5 to 90%, Noncondensing
Package Contents Wireless-G Broadband Router Setup CD-ROM User Guide on CD-ROM Power Adapter Network Cable Minimum Requirements Internet Explorer 6.0 or Firefox 1.0 or higher for Web-based Configuration CD-ROM Drive Windows XP or Vista Network Adapter or Wireless Network Adapter
Linksys A Division of Cisco Systems, Inc. 121 Theory Irvine, CA 92617 USA E-mail: firstname.lastname@example.org Web: www.linksys.com
The maximum performance for wireless is derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright 2008 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our worldwide website at www.linksys.com
The Router has two wall-mount slots on its bottom panel. The distance between the slots is 152 mm (6 inches). Two screws are needed to mount the Router. Suggested Mounting Hardware
true to scale.
Note: Mounting hardware illustrations are not
NOTE: Linksys is not responsible for damages incurred by insecure wall-mounting hardware.
Print this page at 100% size. Cut along the dotted line, and place on the wall to drill precise spacing.
Wall Mounting Template
Wireless Security Checklist
Wireless networks are convenient and easy to install, so homes with high-speed Internet access are adopting them at a rapid pace. Because wireless networking operates by sending information over radio waves, it can be more vulnerable to intruders than a traditional wired network. Like signals from your cellular or cordless phones, signals from your wireless network can also be intercepted. Since you cannot physically prevent someone from connecting to your wireless network, you need to take some additional steps to keep your network secure.
4. Enable encryption
Encryption protects data transmitted over a wireless network. Wi-Fi Protected Access (WPA/WPA2) and Wired Equivalency Privacy (WEP) offer different levels of security for wireless communication. Currently, devices that are Wi-Fi certified are required to support WPA2, but are not required to support WEP. A network encrypted with WPA/WPA2 is more secure than a network encrypted with WEP, because WPA/WPA2 uses dynamic key encryption. To protect the information as it passes over the airwaves, you should enable the highest level of encryption supported by your network equipment. WEP is an older encryption standard and may be the only option available on some older devices that do not support WPA.
1. Change the default wireless network name or SSID
Wireless devices have a default wireless network name or Service Set Identifier (SSID) set by the factory. This is the name of your wireless network, and can be up to 32 characters in length. Linksys wireless products use linksys as the default wireless network name. You should change the wireless network name to something unique to distinguish your wireless network from other wireless networks that may exist around you, but do not use personal information (such as your Social Security number) because this information may be available for anyone to see when browsing for wireless networks.
General Network Security Guidelines
Wireless network security is useless if the underlying network is not secure.
How to Access the Web-Based Utility
To access the web-based utility, launch the web browser on your computer, and enter the Routers default IP address, 192.168.1.1, in the Address field. Then, press Enter. A password request screen will appear. (Non-Windows XP users will see a similar screen.) Leave the User name field blank. The first time you open the Web-based utility, use the default password admin. (You can set a new password from the Administration tabs Management screen.) Click OK to continue.
The Internet Setup section configures the Router to your Internet connection. Most of this information can be obtained through your ISP.
Internet Connection Type
Select the type of Internet connection your ISP provides from the drop-down menu. The available types are:
Automatic Configuration - DHCP Static IP PPPoE PPTP L2TP Telstra Cable
Automatic Configuration - DHCP
By default, the Routers Internet Connection Type is set to Automatic Configuration - DHCP, which should be kept only if your ISP supports DHCP or you are connecting through a dynamic IP address. (This option usually applies to cable connections.)
Internet Connection Type > Automatic Configuration - DHCP Wireless-G Broadband Router
will automatically re-establish your connection. To use this option, select Keep Alive. In the Redial Period field, you specify how often you want the Router to check the Internet connection. The default Redial Period is 30 seconds.
If you are required to use a permanent IP address to connect to the Internet, select Static IP.
Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe only.
Internet Connection Type > Static IP
Internet IP Address This is the Routers IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to specify here. Subnet Mask This is the Routers Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask. Gateway Your ISP will provide you with the Gateway Address, which is the ISP servers IP address. DNS Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address.
Router Name In this field, you can enter a name of up to 39 characters to represent the Router. Host Name/Domain Name These fields allow you to supply a host and domain name for the Router. Some ISPs, usually cable ISPs, require these names as identification. You may have to check with your ISP to see if your broadband Internet service has been configured with a host and domain name. In most cases, leaving these fields blank will work. MTU MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. Select Manual if you want to manually enter the largest packet size that is transmitted. To have the Router select the best MTU for your Internet connection, keep the default setting, Auto. Size When Manual is selected in the MTU field, this option is enabled. Leave this value in the 1200 to 1500 range. The default size depends on the Internet Connection Type:
DHCP, Static IP, or Telstra: 1500 PPPoE: 1492 PPTP or L2TP: 1460
Telstra Cable is a service that applies to connections in Australia only. If your ISP uses HeartBeat Signal (HBS), then select Telstra.
Internet Connection Type > Telstra Cable
User Name and Password Enter the User Name and Password provided by your ISP. Heart Beat Server This is the IP address of the Heartbeat Server. Your ISP will provide you with the IP Address you need to specify here.
Static DNS (1-3) The Domain Name System (DNS) is how the Internet translates domain or website names into Internet addresses or URLs. Your ISP will provide you with at least one DNS Server IP Address. If you wish to use another, enter that IP Address in one of these fields. You can enter up to three DNS Server IP Addresses here. The Router will use these for quicker access to functioning DNS servers. WINS The Windows Internet Naming Service (WINS) manages each PCs interaction with the Internet. If you use a WINS server, enter that servers IP Address here. Otherwise, leave this blank.
The Network Setup section changes the settings on the network connected to the Routers Ethernet ports. Wireless Setup is performed through the Wireless tab.
This presents both the Routers IP Address and Subnet Mask as seen by your network.
Router IP Address
Select the time zone in which your network functions from this drop-down menu. (You can even automatically adjust for daylight saving time.)
Network Address Server Settings (DHCP)
The settings allow you to configure the Routers Dynamic Host Configuration Protocol (DHCP) server function. The Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to each computer on your network. If you choose to enable the Routers DHCP server option, make sure there is no other DHCP server on your network.
Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Setup > DDNS
The Router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server, or other server behind the Router.
DHCP Server DHCP is enabled by factory default. If you already have a DHCP server on your network, or you dont want a DHCP server, then select Disable (no other DHCP features will be available). Starting IP Address Enter a value for the DHCP server to start with when issuing IP addresses. Because the Routers default IP address is 192.168.1.1, the Starting IP Address must be 192.168.1.2 or greater, but smaller than 192.168.1.253. The default Starting IP Address is 192.168.1.100. Maximum Number of DHCP Users Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than 253. The default is 50. Client Lease Time The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be leased this dynamic IP address. After the time is up, the user will be automatically assigned a new dynamic IP address. The default is 0 minutes, which means one day.
Before you can use this feature, you need to sign up for DDNS service with a DDNS service provider, www.dyndns.org or www.TZO.com. If you do not want to use this feature, keep the default setting, Disable.
The Router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server, or other server behind the Router. Before you can use this feature, you need to sign up for DDNS service at one of two DDNS service providers, DynDNS.org or TZO.com. If you do not want to use this feature, keep the default setting, Disable.
If your DDNS service is provided by DynDNS.org, then select DynDNS.org from the drop-down menu. If your DDNS service is provided by TZO, then select TZO.com. The features available on the DDNS screen will vary, depending on which DDNS service provider you use.
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router with the MAC Address Clone feature.
Setup > DDNS > DynDNS
User Name Enter the User Name for your DDNS account. Password Enter the Password for your DDNS account. Host Name The is the DDNS URL assigned by the DDNS service. Internet IP Address The Routers Internet IP address is displayed here. Because it is dynamic, it will change. Status The status of the DDNS service connection is displayed here. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
MAC Address Clone
Enable/Disable To have the MAC Address cloned, select Enable. User Defined Entry Enter the MAC Address registered with your ISP here. Clone Your PCs MAC Clicking this button will clone the MAC address of the computer you are using. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Setup > Advanced Routing
This screen is used to set up the Routers advanced routing functions. NAT routes the host Routers network connection to the Internet. Dynamic Routing automatically adjusts how packets travel on your network. Static Routing sets up a fixed route to another network destination.
Setup > DDNS > TZ O
E-mail Address, TZO Key, and Domain Name Enter the settings of the account you set up with TZO. Internet IP Address The Routers Internet IP address is displayed here. Because it is dynamic, it will change. Status The status of the DDNS service connection is displayed here. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Setup > Advanced Routing (Gateway)
Subnet Mask The Subnet Mask determines which portion of a Destination LAN IP address is the network portion, and which portion is the host portion. Default Gateway This is the IP address of the gateway device that allows for contact between the Router and the remote network or host. Interface This interface tells you whether the Destination IP Address is on the LAN & Wireless (Ethernet and wireless networks) or the WAN (Internet). Delete This Entry To delete a route, select its number from the drop-down menu, and click this button. Show Routing Table Click Show Routing Table to open a screen displaying how data is routed through your local network. For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface are displayed. Click Refresh to update the information. Click Close to exit this screen.
Setup > Advanced Routing (Router )
Operating Mode Select the mode in which this Router will function. If this Router is hosting your networks connection to the Internet, select Gateway. If another Router exists on your network, select Router. When Router is chosen, Dynamic Routing will be available as an option.
Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)
Wi-Fi Protected Setup > Congratulations
NOTE: Wi-Fi Protected Setup configures one client device at a time. Repeat the instructions for each client device that supports Wi-Fi Protected Setup.
Use this method if your client device has a Wi-Fi Protected Setup button. 1. Click or press the Wi-Fi Protected Setup button on the client device. 2. Click the WiFi Protected Setup button on this screen.
NOTE: If you are using WPA, always remember that each device in your wireless network MUST use the same WPA method and shared key, or else the network will not function properly.
3. After the client device has been configured, click OK. Then refer back to your client device or its documentation for further instructions.
Use this method if your client device has a Wi-Fi Protected Setup PIN number. 1. Enter the PIN number in the field on this screen. 2. Click Register. 3. After the client device has been configured, click OK. Then refer back to your client device or its documentation for further instructions.
Use this method if your client device asks for the Routers PIN number. 1. Enter the PIN number listed on this screen. (It is also listed on the label on the bottom of the Router.) 2. After the client device has been configured, click OK. Then refer back to your client device or its documentation for further instructions. The Wi-Fi Protected Setup Status, Network Name (SSID), Security, Encryption, and Passphrase are displayed at the bottom of the screen. NOTE: If you have client devices that do not support Wi-Fi Protected Setup, note the wireless settings, and then manually configure those client devices.
Security Mode > WPA Personal
WPA Algorithm WPA supports two encryption methods, TKIP and AES, with dynamic encryption keys. Select the type of algorithm, TKIP or AES. (AES is a stronger encryption method than TKIP.) WPA Shared Key Enter the key shared by the Router and your other network devices. It must have 8-63 characters. Group Key Renewal Enter a Key Renewal period, which tells the Router how often it should change the encryption keys. The default Group Key Renewal period is 3600 seconds.
Wireless > Wireless Security
The Wireless Security settings configure the security of your wireless network. There are six wireless security mode options supported by the Router: WPA Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise, RADIUS, and WEP. (WPA stands for Wi-Fi Protected Access, which is a security standard stronger than WEP encryption. WPA2 is a more advanced, more secure version of WPA. WEP stands for Wired Equivalent Privacy, and RADIUS stands for Remote Authentication Dial-In User Service.) These six are briefly discussed here. For detailed instructions on configuring wireless security for the Router, refer to Chapter 2: Wireless Security.
This option features WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.)
Select the security method for your wireless network. If you do not want to use wireless security, keep the default, Disabled.
Security Mode > WPA Enterprise
WPA Algorithm WPA supports two encryption m ethods, TKIP and AES, with dynamic encryption keys. Select the type of algorithm, TKIP or AES. (AES is a stronger encryption method than TKIP.)
WPA Algorithm WPA2 supports two encryption methods, TKIP and AES, with dynamic encryption keys. Select the type of algorithm, AES, or TKIP+AES. The default selection is AES RADIUS Server Address Enter the IP Address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default value is 1812. Shared Key Enter the key shared between the Router and the server. Key Renewal Timeout Enter a Key Renewal Timeout period, which instructs the Router how often it should change the encryption keys. The default Key Renewal Timeout period is 3600 seconds.
RADIUS Server Address Enter the IP Address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default value is 1812. Shared Key Enter the key shared between the Router and the server. Key Renewal Timeout Enter a Key Renewal Timeout period, which instructs the Router how often it should change the encryption keys. The default Key Renewal Timeout period is 3600 seconds.
This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.)
Security Mode > WPA2 Personal
WPA Algorithm WPA2 supports two encryption methods, TKIP and AES, with dynamic encryption keys. Select the type of algorithm, AES, or TKIP+AES. The default selection is AES. WPA Shared Key Enter a WPA Shared Key of 8-63 characters. Group Key Renewal Enter a Group Key Renewal period, which instructs the Router how often it should change the encryption keys. The default Group Key Renewal period is 3600 seconds.
Security Mode > RADIUS
This option features WPA2 used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.
IMPORTANT: If you are using WEP encryption, always remember that each device in your wireless network MUST use the same WEP encryption method and encryption key, or else your wireless network will not function properly. RADIUS Server Address Enter the IP Address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default value is 1812. Shared Key Enter the key shared between the Router and the server. Default Transmit Key Select a Default Transmit Key (choose which Key to use). The default is 1.
Security Mode > WPA2 Enterprise
WEP Encryption Select a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits. The default is 64 bits 10 hex digits.
Wireless MAC Filter
Wireless MAC Filter To filter wireless users by MAC Address, either permitting or blocking access, click Enable. If you do not wish to filter users by MAC Address, keep the default setting, Disable. Prevent Select this to block wireless access by MAC Address. This button is selected by default. Permit Only Select this to allow wireless access by MAC Address. This button is not selected by default. Edit MAC Filter List Click this to open the MAC Address Filter List screen. On this screen, you can list users, by MAC Address, to whom you wish to provide or block access. For easy reference, click Wireless Client MAC List to display a list of network users by MAC Address.
Passphrase Enter a Passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a Passphrase, enter the WEP key(s) manually.
WEP is a basic encryption method, which is not as secure as WPA.
Security Mode > WEP
Default Transmit Key Select a Default Transmit Key (choose which Key to use). The default is 1. WEP Encryption Select a level of WEP encryption, 64bits 10 hex digits or 128 bits 26 hex digits. The default is 64bits 10 hex digits. Passphrase Enter a Passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a Passphrase, enter the WEP key(s) manually. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
MAC Address Filter List
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your networks radius.
Wireless > Advanced Wireless Settings
This Wireless > Advanced Wireless Settings screen is used to set up the Routers advanced wireless functions. These settings should only be adjusted by an expert administrator as incorrect settings can reduce wireless performance.
Internet Policy Summary
Status Policies are disabled by default. To enable a policy, select the policy number from the drop-down menu, and select Enable.
To create an Internet Access policy:
1. Select a number from the Internet Access Policy dropdown menu. 2. To enable this policy, select Enable. 3. Enter a Policy Name in the field provided. 4. Click Edit List of PCs to select which PCs will be affected by the policy. The List of PCs screen appears. You can
Wireless-G Broadband Router Port Services
To add a service, enter the services name in the Service Name field. Select its protocol from the Protocol dropdown menu, and enter its range in the Port Range fields. Then click Add.
Application In this field, enter the name you wish to give the application. Each name can be up to 12 characters. Start/End This is the port range. Enter the number that starts the port range in the Start column and the number that ends the range in the End column. Protocol Select the protocol used for this application, either TCP or UDP, or Both. IP Address For each application, enter the IP Address of the PC running the specific application. Enable Select Enable to enable port forwarding for the relevant application. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
To modify a service, select it from the list on the right. Change its name, protocol setting, or port range. Then click Modify. To delete a service, select it from the list on the right. Then click Delete. When you are finished making changes on the Port Services screen, click Apply to save the changes. If you want to cancel your changes, click Cancel. To close the Port Services screen and return to the Access Restrictions screen, click Close.
Website Blocking by URL Address
If you want to block websites with specific URL addresses, enter each URL in a separate field next to Website Blocking by URL Address.
Website Blocking by Keyword
If you want to block websites using specific keywords, enter each keyword in a separate field next to Website Blocking by Keyword. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Applications and Gaming > QoS Applications and Gaming > DMZ
Enter the name of your network device in the Device name field, enter its MAC Address, and then select its priority from the drop-down menu.
Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP address assigned to it because its IP address may change when using the DHCP function. To expose one PC, select Enable. Then, enter the computers IP address in the DMZ Host IP Address field. This feature is disabled by default. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Ethernet Port Priority
Ethernet Port Priority QoS allows you to prioritize performance for the Routers four ports, LAN Ports 1-4. For each port, select the priority and flow control setting. Priority Select High or Low in the Priority column. The Routers four ports have been assigned low priority by default. Flow Control If you want the Router to control the transmission of data between network devices, select Enabled. To disable this feature, select Disabled. Ethernet Port Priority QoS does not require support from your ISP because the prioritized ports LAN ports 1-4 are in your network. This feature is enabled by default.
Applications and Gaming > QoS
Quality of Service (QoS) ensures better service to high-priority types of network traffic, which may involve demanding, real-time applications, such as videoconferencing. There are three types of QoS available: Device Priority, Ethernet Port Priority, and Application Priority.
Application Priority QoS manages information as it is transmitted and received. Depending on the settings of the QoS screen, this feature will assign information a high or low priority for the applications that you specify. Optimize Gaming Applications Select this to automatically allow common game application ports to have a higher priority. These games include, but are not limited to: Counter-Strike, Half-Life, Age of Empires, Everquest, Quake2/Quake3, and Diablo II. The default setting is unselected. Application Name Enter the name you wish to give the application in the Application Name field. Priority Select High or Low to assign priority to the application. The default selection is Low. Specific Port # Enter the port number for the application.
Administration > Management
Local Router Access
Router Password Enter a new Password for the Router. Re-enter to confirm Enter the Password again to confirm.
WMM Support Wi-Fi Multimedia (WMM), formerly known as Wireless Multimedia Extensions (WME), is a Wi-Fi Alliance certified feature, based on the IEEE 802.11e standard. This feature provides QoS to wireless networks. It is especially suitable for voice, music and video applications; for example, Voice over IP (VoIP), video streaming, and interactive gaming. If you have other devices on your wireless network that support WMM, select Enabled. Otherwise, keep the default, Disabled. No Acknowledgement This feature prevents the Router from re-sending data if an error occurs. To use this feature, select Enabled. Otherwise, keep the default setting, Disabled. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Access Server HTTP (HyperText Transport Protocol) is the communications protocol used to connect to servers on the World Wide Web. HTTPS uses SSL (Secured Socket Layer) to encrypt data transmitted for higher security. Select HTTP or HTTPS. The default selection is HTTP. Wireless Access Web If you are using the Router in a public domain where you are giving wireless access to your guests, you can disable wireless access to the Routers web-based utility. You will only be able to access the web-based utility via a wired connection if you disable the setting. Keep the default, Enable, to enable wireless access to the Routers web-based utility, or select Disable to disable wireless access to the utility.
The Administration > Management screen allows the networks administrator to manage specific Router functions for access and security.
Remote Router Access
Remote Management To access the Router remotely, from outside the network, select Enable. Management Port Enter the port number that will be open to outside access. You will need to enter the Routers password when accessing the Router this way, as usual. Use https To require the use of HTTPS for remote access, select this feature.
UPnP Keep the default, Enable to enable the UPnP feature; otherwise, select Disable. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Wireless-G Broadband Router 19
Administration > Log
The Router can keep logs of all traffic for your Internet connection.
The Ping Test Administration > Log
Traceroute To test the performance of a connection, click Traceroute to open the Traceroute Test screen. Enter the address of the PC whose connection you wish to test and click Traceroute. The Traceroute Test screen will show if the test was successful. To stop the test, click Stop. Click Clear Log to clear the screen. Click Close to return to the Diagnostics screen.
Log To disable the Log function, keep the default setting, Disable. To monitor traffic between the network and the Internet, select Enable. When you wish to view the logs, click Incoming Log or Outgoing Log, depending on which you wish to view. Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components.
The Traceroute Test
Administration > Factory Defaults
The Administration > Factory Defaults screen allows you to restore the Routers configuration to its factory default settings.
Restore Factory Defaults To reset the Routers settings to the default values, select Yes, and then click Save Settings. Any settings you have saved will be lost when the default settings are restored.
Ping The Ping test checks the status of a connection. Click Ping to open the Ping Test screen. Enter the address of the PC whose connection you wish to test and how many times you wish to test it. Then, click Ping. The Ping Test screen will show if the test was successful. To stop the test, click Stop. Click Clear Log to clear the screen. Click Close to return to the Diagnostics screen.
Status > Router
The Status > Router screen displays the Routers current status.
Administration > Upgrade Firmware
The Administration > Upgrade Firmware screen allows you to upgrade the Routers firmware. Do not upgrade the firmware unless you are experiencing problems with the Router or the new firmware has a feature you want to use.
Before upgrading the firmware, download the Routers firmware upgrade file from the Linksys website, www. linksys.com. Then extract the file.
Please select a file to upgrade Click Browse and select the extracted firmware upgrade file. Then click Upgrade and follow the on-screen instructions.
Firmware Version This is the Routers current firmware. Current Time This shows the time, as you set on the Setup tab. MAC Address This is the Routers MAC Address, as seen by your ISP. Router Name This is the specific name for the Router, which you set on the Setup tab. Host Name If required by your ISP, this would have been entered on the Setup tab. Domain Name If required by your ISP, this would have been entered on the Setup tab.
Administration > Config Management
This screen is used to back up or restore the Routers configuration file.
To back up the Routers configuration file, click Backup. Then follow the on-screen instructions.
This section shows the current network information stored in the Router. The information varies depending on the Internet connection type selected on the Setup > Basic Setup screen. Click Refresh to update the on-screen information.
Please select a file to restore Click Browse and select the configuration file. Then click Restore.
Status > Wireless
The Status > Wireless screen displays the status of your wireless network.
Status > Local Network
The Status > Local Network screen displays the status of your network.
MAC Address This is the Routers MAC Address, as seen on your local, Ethernet network. IP Address This shows the Routers IP Address, as it appears on your local, Ethernet network. Subnet Mask This shows the current subnet mask being configured for your local network. DHCP Server If you are using the Router as a DHCP server, that will be displayed here. Start IP Address For the range of IP Addresses used by devices on your local, Ethernet network, the beginning of that range is shown here. End IP Address For the range of IP Addresses used by devices on your local, Ethernet network, the end of that range is shown here. DHCP Clients Table Clicking this button will open a screen to show you which PCs are utilizing the Router as a DHCP server. You can delete PCs from that list, and sever their connections, by checking a Delete box and clicking the Delete button.
MAC Address This is the Routers MAC Address, as seen on your local, wireless network. Mode As selected from the Wireless > Basic Wireless Settings screen, this displays the wireless mode (Mixed, GOnly, or Disabled) used by the network. SSID As entered on the Wireless > Basic Wireless Settings screen, this displays the wireless network name or SSID. DHCP Server The status of the DHCP server function is displayed here. Channel As entered on the Wireless > Basic Wireless Settings screen, this displays the channel on which your wireless network is broadcasting. Encryption Function As selected on the Wireless > Wireless Security screen, this displays the status of the Routers wireless security. Click Refresh to update the on-screen information.
Leica R4 Roland E60 DMC-FS15 ICD-B100 KDC-316S Aqxl 105 Philips 755 Reference B1245V NV-DS1B RS100 K300A S-ST770 LN32B550 Gtfh2 Coffee MP12 Setup Finepix 1300 86 XA Digigard DG85 Jetta WL-2600CAM J3500 AVR-2808 R1938 4900 Zoom CED-8083B Laserjet 3052 TXL42U2E Vegas Cd32 Default Password BMS35AB GA-M68m-s2P Motorola H375 LE46A856 SGH-B270 KD-DV7401 V1 735 P S2 PRO Voice DUO MDS-JE480 SA-XR700 Keypad Vivicam 3935 MC1762E-M Review L1919S-SF Makita 6413 ES-7036 42PD7200 RX-V757 Reset DCR-PC107E HTR5000-01 RP-20CB20A Festina 6433 Display Wireless PAD Individual QB516K DVP-F21 MG800C 784 S 1 2 P5916 Firmware SP1654N-SRL R-09 F ZS204 PS50A450p1D VGN-P11z R Cube-40 Password Calibre 36 ICF-C1IP 3YM20 Nvgs70 Batteries PB15 M-CR502 42LC45 DV5502P IS 250 CD610 Xvs650L Beta 87A AX-UXG6 TL-WN722N LD-2151M DPF 7331 Alesis SR18 CR74G TFT-721 Nitro RM-P7D I-GO IGO LSP-430T Elite 3925 Supernova GR-DVL320u-gr-dvl320 Press PCG-FX902P CDX-S2000C Ketron XD9 EDC5330 TL-R4000 Single
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101