2" ADJUSTABLE FITTER
22" (559 mm) AREA CUTOFF LIGHT
Ballast Capacitor Housing Seamless, die-cast aluminum DeltaGuard finish Reflector Prefinished semi-specular diffuse and diffuse aluminum wrapper, and semi-specular aluminum sides

AC3-22 SERIES

2.3" (57 mm)
Ignitor (Where required) Wiring Chamber

22" (559 mm)

Lamp (Included) 9.3" (235 mm)

5.5" (140 mm)

Lampholder

Set Screws

3.5" (89 mm)
Adjustable Fitter Die-cast aluminum knuckle is sized for 2" pipe (2-3/8" [60 mm] O.D.)
Ballast Compartment Cover

Patented Hinge Assembly

Lens Frame Die-cast aluminum door frame secures lens; sealed with silicone gasket

SPEC #

WATTAGE

CATALOG #

(a) VOLTAGE SUFFIX KEY
120/208/240/277V (Standard) 120V 277V 208V 240V 480V (N/A For 1000W) -(a)F -1P -5P Q
(b) OPTIONS (factory-installed)
Fusing External Photocell (for 120V) External Photocell (for 480V) Quartz Standby
(includes 100W quartz lamp)
Specify (a) Single Voltage See Voltage Suffix Key
PULSE START METAL HALIDE 750W PSMH AC3675-(a)(b) METAL HALIDE 1000W MH AC3499-(a)(b)
Specify (a) Voltage & (b) Options. Reduced envelope BT-37 lamp.
For voltage availability outside the US and Canada, see Bulletin TD-9 or contact your Ruud Lighting authorized International Distributor.
GENERAL DESCRIPTION 60 forward throw sharp cutoff luminaire for HID lamp, totally enclosed. Housing is die-cast aluminum. Aluminum die-cast adjustable fitter mounting is sized for 2" pipe (2-3/8" [60 mm] O.D.). Allows for directional aiming as well as 2-1/2 incremental vertical adjustment. Contains integral wiring compartment. Two stainless-steel set screws provide clamping to vertical tenons. Lens assembly consists of rigid aluminum frame and high-impact, clear-tempered glass. FINISH Exclusive Colorfast DeltaGuard finish features an E-coat epoxy primer with medium bronze ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. The finish is covered by our seven-year limited warranty.
ELECTRICAL Fixture includes clear, mogul-base lamp. 1000W MH utilizes the BT-37 reduced envelope lamp. Pulse-rated porcelain enclosed, 4kv-rated screwshell-type lampholder with spring-loaded center contact and lamp grips. Lamp ignitor included where required. All ballast assemblies are highpower factor and use the following circuit type: US 4,689,729

PATENT

ACCESSORIES
FWG-22 PC-2 PGM-1 SBL-22 Wire Guard Button Photocell
(for fixtures set to 208, 240, 277V)
CWA Constant Wattage Autotransformer 750W PSMH; 1000W MH
LABELS ANSI lamp wattage label supplied, visible during relamping. UL Listed in US and Canada for wet locations and enclosure classified IP54 per IEC 529 and IEC 598.
Ground Mount Post Backlight Shield
9201 Washington Avenue Racine, Wisconsin 53406-3772 USA
Ruud Lighting Inc. Printed in USA

PHONE (262) 886-1900

www.ruudlighting.com

FAX (262) 884-3309

07/08/09
Isofootcandle plots show initial footcandles at grade. (Footcandles 0.0929 = Lux) EPA RATING EPA 1.62 for single fixture with 0 tilt (Consult factory for EPA rating on multiple units or other tilt angles).
120' 100' 80' 60' 40' 20' 180'
20' 40' 60' 80' 100' 120' 54.9

48.8 42.7 36.6

120' 100' 80' 60' 40' 20' 180' 160' 140' 120' 100' 80' 60' 40' 20' 0' 20' 40'
20' 40' 60' 80' 100' 120' 54.9 48.8 42.7 36.6

160' 140' 120' 100'

.1.3 5

30.5 24.4 18.3 12.2

80' 60' 40'

20' 0'

6.1 0m 6.1 12.2
18.3 60' 36.6 30.5 24.4 18.3 12.2 6.m 6.1 12.2 18.3 24.4 30.5 36.6
Lighting Sciences Inc. Certified Test Report No. LSI 10288 Candlepower distribution curve of 1000W MH Area Cutoff Floodlight without backlight shield utilizing BT-37 lamp.
Isofootcandle plot of 1000W MH Area Cutoff Floodlight at 30' (9.1 m) mounting height and 0 vertical tilt, with backlight shield located for backlight cutoff. (Plan view)
Isofootcandle plot of 1000W MH Area Cutoff Floodlight at 30' (9.1 m) mounting height and 0 vertical tilt, with backlight shield removed. (Plan view)

Pole-spacing Example Data

TEST AREA

Average Initial Light Levels at Grade 2 Fixtures per pole @ 180
Test area is centered within a (16) pole layout.
(Footcandles 0.0929 = Lux)

Catalog # AC3499-M

Lamp Type 1000W MH

Lamp Lumens 99,000

Mounting Height 35' (10.7 m) 40' (12.2 m)
Max. Recommended Pole-spacing X x Y 130' (39.7 m) x 190' (57.9 m) 150' (45.7 m) x 220' (67.1 m)

Footcandles 5.46 4.02

Lux 59 43

2" ADJUSTABLE FITTER
12" (305 mm) AREA CUTOFF LIGHT
Ballast Capacitor Housing Seamless, die-cast aluminum Finish color: bronze Reflector. Specular hammertone wrapper with semi-specular sides

AC3-12 SERIES

2.3" (58 mm) Ignitor (Where required)

12" (305 mm)

Wiring Chamber

Lamp (Included)

5" (127 mm)

Lampholder

5.5" (140 mm) 3.5" (89 mm) Ballast Compartment Cover Patented Hinge Assembly

Set Screws

Lens Frame Die-cast aluminum door frame secures lens; sealed with silicone gasket Finish color: black
Adjustable Fitter Die-cast aluminum knuckle is sized for 2" pipe (2-3/8" [60 mm] O.D.) Finish color: bronze

SPEC #

WATTAGE

CATALOG #

(a) VOLTAGE SUFFIX KEY
120/277V (Standard: 125W PSMH;

50 100W MH; 50W HPS)

(b) OPTIONS (factory-installed)
-(a)F -5P Q Fusing External Photocell (for 480V) Quartz Standby
(includes 100W quartz lamp) (N/A on 277V Reactor)
Specify (a) Single Voltage See Voltage Suffix Key
PULSE START METAL HALIDE SPEC # 125W PSMH MAC3612-(a)(b) SPEC # 150W PSMH MAC3615-(a)(b) METAL HALIDE SPEC # 50W MH MAC3405-(a)(b) SPEC # 70W MH MAC3407-(a)(b) SPEC # 100W MH MAC3410-(a)(b) SPEC # 175W MH MAC3417-(a)(b) HIGH PRESSURE SODIUM SPEC # 35W HPS MAC3503-(a)(b) SPEC # 50W HPS MAC3505-(a)(b) SPEC # 70W HPS MAC3507-(a)(b) SPEC # 100W HPS MAC3510-(a)(b) SPEC # 150W HPS MAC3515-(a)(b)
Specify (a) Voltage & (b) Options.

120/208/240/277V

(Standard: 150W PSMH; 175W MH; 70 150W HPS)
120/277/347V (Canada Only)
(Standard: 150W PSMH; 70 175W MH; 70 150W HPS)
120V (Standard: 35W HPS) 277V 277V Reactor (150W PSMH Only) 208V 240V 480V (175W MH; 70 150W HPS) 347V (Canada Only)
For voltage availability outside the US and Canada, see Bulletin TD-9 or contact your Ruud Lighting authorized International Distributor.
GENERAL DESCRIPTION 60 forward throw sharp cutoff luminaire for HID lamp, totally enclosed. Housing is seamless, die-cast aluminum. Aluminum diecast adjustable fitter mounting is sized for 2" pipe (2-3/8" [60 mm] O.D.). Allows for directional aiming as well as 2-1/2 incremental vertical adjustment. Contains integral wiring compartment. Two stainless-steel set screws provide clamping to vertical tenons. Lens assembly consists of rigid aluminum frame and high-impact, clear-tempered glass. PATENT US 4,689,729
ELECTRICAL Fixture includes clear, medium-base lamp. Pulse-rated porcelain enclosed, 4kv-rated screwshell-type lampholder. Lamp ignitor included where required. All ballast assemblies are highpower factor and use the following circuit types:
FINISH Exclusive DeltaGuard finish features an E-coat epoxy primer with medium bronze ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. The finish is covered by our sevenyear limited warranty.
Reactor (277V PSMH) 150W PSMH Reactor 120V: 35 150W HPS HX High Reactance 50 100W MH; 50 150W HPS CWA Constant Wattage Autotransformer 125 & 150W PSMH; 175W MH

LABELS

ACCESSORIES
FWG-12 PC-1 PC*6 PC-2 PGM-1 SBL-12 Wire Guard Button Photocell
(for fixtures set to 120V)

Button Photocell

(for fixtures set to 347V)
(for fixtures set to 208, 240, 277V)
ANSI lamp wattage label supplied, visible during relamping. UL Listed in US and Canada for wet locations and enclosure classified IP65 per IEC 529 and IEC 598. 9201 Washington Avenue Racine, Wisconsin 53406-3772 USA PHONE (262) 886-1900
Ruud Lighting Inc. Printed in USA www.ruudlighting.com
Ground Mount Post Backlight Shield

FAX (262) 884-3309

11/11/05
Isofootcandle plots show initial footcandles at grade. (Footcandles 0.0929 = Lux) EPA RATING EPA 0.60 for single fixture with 0 tilt (Consult factory for EPA rating on multiple units).
80' 60' 40' 20' 80' 60' 40'

.1.3.5

20' 40' 60' 80' 24.4 18.3 12.2 6.1 0m 6.1 12.2 18.3
80' 60' 40' 20' 80' 60' 40' 20'
20' 40' 60' 80' 24.4 18.3 12.2 6.1

20' 0' 20'

0' 20' 40' 60'

0m 6.1 12.2 18.3

40' 60'

6000 8000

24.4 80' 24.4 18.3 12.2 6.m 6.1 12.2 18.3 24.4
Lighting Sciences Inc. Certified Test Report No. LSI 10695 Candlepower distribution curve of 175W MH Rectangular Area Cutoff Floodlight, with backlight shield located for backlight cutoff.
Isofootcandle plot of 175W MH Area Cutoff Floodlight at 15' (4.6 m) mounting height, 0 vertical tilt, with backlight shield located for backlight cutoff. (Plan view)

Isofootcandle plot of 175W MH Area Cutoff Floodlight at 20' (6.1 m) mounting height, 0 vertical tilt, with backlight shield located for backlight cutoff. (Plan view)
80' 60' 40' 20' 80' 60' 40' 20' 0' 20' 40' 60' 0'
20' 40' 60' 80' 24.4 18.3
12.2 6.1 0m 6.1 12.2 18.3
Lighting Sciences Inc. Certified Test Report No. LSI 11233 Candlepower distribution curve of 150W HPS Rectangular Area Cutoff Floodlight, with backlight shield located for backlight cutoff.
Isofootcandle plot of 150W HPS Area Cutoff Floodlight at 15' (4.6 m) mounting height, 0 vertical tilt, with backlight shield located for backlight cutoff. (Plan view)
Isofootcandle plot of 150W HPS Area Cutoff Floodlight at 20' (6.1 m) mounting height, 0 vertical tilt, with backlight shield located for backlight cutoff. (Plan view)
Pole-spacing Example Data

TEST AREA

Test area is centered within a (16) pole layout.
Average Initial Light Levels at Grade 2 Fixtures per pole @ 180
(Footcandles 0.0929 = Lux)
Catalog # MAC3410-D MAC3417-M MAC3510-M MAC3515-M
Lamp Type 100W MH 175W MH 100W HPS 150W HPS
Lamp Lumens 8,100 12,000 9,500 16,000
Mounting Height 10' (3.0 m) 15' (4.6 m) 15' (4.6 m) 20' (6.1 m) 10' (3.0 m) 15' (4.6 m) 15' (4.6 m) 20' (6.1 m)
Max. Recommended Pole-spacing X x Y 40' (12.1 m) x 55' (16.7 m) 60' (18.3 m) x 85' (25.9 m) 60' (18.3 m) x 85' (25.9 m) 75' (22.9 m) x 110' (33.5 m) 40' (12.1 m) x 55' (16.7 m) 60' (18.3 m) x 85' (25.9 m) 60' (18.3 m) x 85' (25.9 m) 75' (22.9 m) x 110' (33.5 m)
Footcandles 4.92 2.04 3.01 1.81 5.05 2.08 3.51 2.11

Lux 38 23

9201 Washington Avenue Racine, Wisconsin 53406-3772 USA
Ruud Lighting Inc. Printed in USA

PHONE (262) 886-1900

www.ruudlighting.com