MC2 MicroCON RACING WHEEL

ENGLISH

assign different functions to different buttons.
FOR THE PLAYSTATION2, PS ONE AND PLAYSTATION VIDEO GAME SYSTEMS
Thank you for purchasing the Mad Catz MC2 MicroCON Racing Wheel for use with the PlayStation 2, PS one and PlayStation video game systems. The Mad Catz MC2 MicroCON Racing Wheel will give you precision control and enhance the realism of all your favorite driving games. This users guide will help you understand how to use your MC2 MicroCON Racing Wheel and get the most from the features it has to offer. The Mad Catz MC2 MicroCON Racing Wheel is one of the most durable and reliable accessories you can buy. Be sure to visit www.madcatz.com to register your product and check out our full line of other quality video game accessories.
Reprogramming the Button Layouts
The MC2 has been designed to be fully programmable for PLAYSTATION. Only pedals and butterfly switches can be re-mapped. To re-map pedals and butterfly switches, 1. Press the program button. (Note: While in program mode, the controller will not function in a game) 2. Once the program button has been pressed, the Program LED will light up, you may begin programming. 3. Press the pedal or butterfly switch you would like to re-map (LED begins flashing) and then press the button that has the desired function (LED shuts off). For example, to make the right pedal button function as the B button, the following steps would be followed. 1. Press the Program button. The program button will light when activated. 2. Press the right pedal button. The program light will flash. 3. Press the B button. 4. The program light will go out. The button has been reprogrammed. To clear the configuration and reset it back to the default settings, press the Program button, then press the button twice to reset. All programming must be done one session at a time. If you wish to change multiple buttons, repeat the steps above for each button you wish to change.

TABLE OF CONTENTS

SET-UP STEERING WHEEL ADJUSTMENT REPROGRAMMING THE BUTTON LAYOUTS MC2 MICROCON RACING WHEEL LAYOUT CAUTIONS TROUBLESHOOTING TECHNICAL SUPPORT WARRANTY 6 6
IMPORTANT! Before using this product, read the video game system instruction manual for safety, health, and other information. 1. Make sure the video game system is turned OFF. Connect the MC2 MicroCON Racing Wheel to the video game system. 2. Insert game and turn on the power to the video game system. DO NOT MOVE THE STEERING WHEEL DURING START UP. The controller uses this time to calibrate.
STEERING WHEEL ADJUSTMENT
Many steering wheel compatible and analog controller compatible games will offer a variety of controller configurations and settings in the games options menu. The different controller configurations will allow the user to select and
Press the right butterfly IN and R1 is emulated (full on). Push the right butterfly OUT and the button under the right analog joystick is emulated

Retractable Leg Straps

There are two retractable leg straps on the base of the MC2 that can extend to provide stability, comfort and added support when the wheel is on your lap.

Suction Cups

There are three suction cups on the base of the MC2 for mounting to a table or desktop.

Start Button

Functions the same as in the standard controller.

Select Button

MC2 MICROCON RACING WHEEL LAYOUT

Steering Wheel

This is the heart of the controller. It provides all of your steering control. Because it is true analog, you will get more responsive and accurate control.

Program Button

Allows you to program the Butterfly Switches and pedals. (Please see above.)

CAUTIONS

IMPORTANT! Before using this product read all accompanying information and your game systems instruction manual for safety, health and other information. To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do not use with 30 of any water such as swimming pools, bathtubs, or sink. To avoid electrical shock, do not disassemble. Refer servicing to qualified personnel only. Never push objects of any kind, other than authorized items, into the product as they may touch dangerous voltage points or short out parts that could result in fire or electrical shock. Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in your hands and/or arms while operating the unit. If the condition persists, consult a doctor. Do not attempt to operate the unit in any way except with your hands. Do not bring the unit in contact with your head, face, or near the bones of any other part of your body.

Pedals

Provide analog acceleration (right pedal) and braking (left pedal). The pedals emulate the right analog stick forward for gas and the right analog stick backwards for braking buttons (respectively).

Directional Pad

This emulates the D-pad found on most control pads. This is used for navigating through the menus and making menu changes.

Action Buttons

These buttons are fully analog and correspond to specific game functions detailed in your software documentation and options menu.

Butterfly Switches

Press the left butterfly IN and button L1 is emulated (full on). Push the left butterfly OUT and the button under the left analog joystick is emulated.
The vibration function of this unit can aggravate injuries. Switch off or do not use the vibration function of the unit if you have any ailment of the bones or joints of your hands or arms. Avoid prolonged use of this unit. Take breaks every 30 minutes. Route all cords so that they are not likely to be walked on or tripped over. Make sure that cords are not placed in positions or areas where they may become pinched or damaged. Do not wrap this cord around any part of anyones body. Do not allow children to play with cords. Use this unit only as intended. Do not plug the MC2 MicroCON Racing Wheel into the game console while the power is on. Precautions should be taken to prevent electrical shock. For indoor use only. Do not submerge in water. Choking hazard, small parts: not for children under three years.
Problem: Im playing a Vibration Function compatible game and its not vibrating. Solution: Some software titles require you to manually turn the vibration option on in the option menus. Problem: User gets no response on screen to any movement of controls. Solution: Make sure you are not in Program Mode. Problem: The action buttons are not configured the way I like them. Solution: Please check the games options menu for additional controller configurations. Most software titles will allow you to choose or program a different button layout.

TECHNICAL SUPPORT

Mad Catz provides technical support for all of its products in a variety of ways. Online - Check the Mad Catz Home Page at www.madcatz.com. There you will find up-to-the-minute solutions, tips, and information for all of our products. Our comprehensive Tech Support area offers answers to nearly every question. E-mail - You can send e-mail to our Support Technicians at techsupport@madcatz.com. In most cases, you will receive a reply within one business day. Telephone - Technical Support is available from 8 A.M. to 4 P.M. pacific standard time, Monday through Friday (excluding holidays) at 1.800.659.2287 (U.S. only) or 1.619.683.2815 (outside U.S.) Fax - Technical Support is available via fax at 1.619.683.9839. FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

TROUBLESHOOTING

Below are answers to frequently asked questions. Problem: The MC2 MicroCON Racing Wheel will not function. Solution: If the MC2 MicroCON Racing Wheel continues to not function, turn the power to your video game system OFF, disconnect the MC2 MicroCON Racing Wheel and reconnect the MC2 MicroCON Racing Wheel. Turn the power on to your video game system and retry the game. Problem: Vehicle control is touchy or sluggish. Solution: Go to the software options menu and adjust the steering sensitivity and dead zone if available. Problem: The vehicle drifts in one direction. Solution: Unplug the controller and plug back into the console. Restart the system if necessary. Problem: The game acts as if one of the pedals is being activated. Solution: Unplug the controller and plug back into the console. Restart the system if necessary.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications made on the system not expressly approved by the manufacturer could void the users authority to operate the equipment. Declaration of Conformity Model Number: 8230 Trade Name: MC2 MicroCON RACING WHEEL. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Thank you for purchasing the Mad Catz MC2 MicroCON RACING WHEEL for the PlayStation, PS one and PlayStation 2 video game systems. Be sure to register your product at www.madcatz.com and check out our full line of quality video game accessories.

WARRANTY

When you purchase from Mad Catz, you purchase quality. We put our products through comprehensive tests to ensure the highest reliability and compatibility. You will probably never encounter a problem with our products, but if you should experience any difficulties, Mad Catz offers a five (5) year replacement warranty on this product. Mad Catz warrants to the original consumer purchaser that this product is free from defects in either material or workmanship. If a defect covered by this warranty occurs, Mad Catz, at its option, will repair or replace the product at no charge. Mad Catz products are tested to withstand normal wear and tear, but are not indestructible and can be damaged if misused. The Mad Catz warranty does not cover normal wear and tear or abusive use. This warranty does not apply to products used for any industrial, professional or commercial purpose. This warranty does not apply to products that have been damaged by abuse, misuse, modification or tampering or by any other cause not relating to either materials or workmanship. If a replacement is necessary and your product is no longer available, a comparable product may be substituted at Mad Catz sole discretion. The Mad Catz limited lifetime warranty is available to North American customers only, including Canada, Mexico and the United States To activate your five (5) year warranty, you must: Register your Mad Catz product on the web at www.madcatz.com To obtain warranty service, you must: Call Mad Catz Technical Support at 1.800.659.2287 (USA only) or 1.619.683.2815 (outside USA) Obtain a Return Authorization Number from Mad Catz Technical Support Return the product to Mad Catz with the postage prepaid and insured. Mad Catz will not be responsible for any loss or damage during shipment. Mad Catz will pay the full return shipping (see return address below) Enclose a copy of the original sales receipt showing a purchase date Enclose a full return address along with daytime and evening phone numbers
Be sure to package the product so that it will not become damaged in shipping. We recommend placing the original box inside another box packed with packaging material. Mad Catz, Inc. will not be responsible for any damage or loss to the product in shipment All returns should be addressed to: Mad Catz, Inc. ATTN: Warranty 7480 Mission Valley Rd. Suite 101 San Diego, CA 92108-4406 Please allow for 4 to 6 weeks for processing. In the event of a problem, we will contact you at one of the phone numbers provided.

2004 Mad Catz, Inc. 7480 Mission Valley Road, Suite 101, San Diego, CA 92108 USA. Mad Catz, the Mad Catz logo, MC2 and MicroCON are trademarks or registered trademarks of Mad Catz, Inc., its subsidiaries and affiliates. The shape and design of this product is a tradedress of Mad Catz. TouchSense Technology Licensed from Immersion Corporation. PlayStation and PS one are registered trademarks or trademarks of Sony Computer Entertainment, Inc. (SCEI). This product is not sponsored, endorsed or approved by SCEI. Product appearance, features and specifications may be subject to change without notice. International and domestic patents pending. Made in China. Printed in Hong Kong. All rights reserved. Please retain this information for future reference. Mad Catz stands behind its products 100%. Questions? Visit our web site at www.madcatz.com or call 1.800.659.2287 (USA only) or 1.619.683.2815. Product No. 8230 06/04