Combination Hammers
HR2811F/FT, HR2810/T 28mm (1-1/8")
Satisfy Professional's Needs

SDS-Plus Shank

Rotary Hammer HR2800 28mm (1-1/8")

Photo: HR2810

Accessories
Quick change drill chuck (Drill chuck set)
For Model: HR2811FT, HR2810T Part No. 194079-2

Dust cup

Bit dia: 6-14.5mm Part No. 421342-3 Bit dia: 12-16mm Part No. 421664-1
Dust extractor attachment

Part No. 193472-7

Dust cup set

Part No. 194580-7

Comparison of Drilling Efficiency

Drilling

Note: Numbers in the charts below are relative values when the capacities of competitor "B" are indexed at 100.
Note: It may differ under some conditions.
P ow e rful a nd Com forta ble O pe r ati on w ith Com pa ct Body

Chipping

Note: Numbers in the charts below are relative values when the capacities of competitor "H" are indexed at 100.
Test conditions: Drilled in concrete with compressive strength of 40N/mm2.

Bit diameter: 14.5mm

Makita HR2811F Competitor "B" Competitor "H" 0

Bit diameter: 22mm

Makita HR2811F Competitor "B" Competitor "H"
Test conditions: Chipped concrete with compressive strength of 40N/mm2, and measured the amount of concrete removed.

120 140

Makita HR2811F

140 100

100 70

Competitor "H"

Combination Hammers HR2811F/FT, HR2810/T
Double Insulation Variable Speed Reversing Torque Limiter Dust Collecting SDS-Plus Shank Carrying Case Built-in Job Light (HR2811F, HR2811FT only) Continuous rating Input Capacity Concrete : (with diamond core bit) Concrete : (with T.C.T. bit) Steel : Wood : Impacts per minute (ipm) No load speed (rpm) Dimensions Net weight Power supply cord
HR2811F 800W 80mm (3-1/8") 28mm (1-1/8") 13mm (1/2") 32mm (1-1/4") 0 - 4,- 1,x 89 x 225mm (12-5/8" x 3-1/2" x 8-7/8") 3.3kg (7.3lbs) 4.0m (13.1ft)

Rotary Hammer

HR2810 800W 80mm (3-1/8") 28mm (1-1/8") 13mm (1/2") 32mm (1-1/4") 0 - 4,- 1,x 89 x 225mm (12-3/8" x 3-1/2" x 8-7/8") 3.2kg (7.1lbs) 4.0m (13.1ft)

HR2800

HR2810T 800W 80mm (3-1/8") 28mm (1-1/8") 13mm (1/2") 32mm (1-1/4") 0 - 4,- 1,x 89 x 225mm (13-3/8" x 3-1/2" x 8-7/8") 3.3kg (7.3lbs) 4.0m (13.1ft) HR2800 800W
HR2811FT 800W 80mm (3-1/8") 28mm (1-1/8") 13mm (1/2") 32mm (1-1/4") 0 - 4,- 1,x 89 x 225mm (13-5/8" x 3-1/2" x 8-7/8") 3.4kg (7.5lbs) 4.0m (13.1ft)
80mm (3-1/8") 28mm (1-1/8") 13mm (1/2") 32mm (1-1/4") 0 - 4,- 1,x 89 x 225mm (12-3/8" x 3-1/2" x 8-7/8") 3.2kg (7.1lbs) 4.0m (13.1ft)

Photo: HR2811F

Standard Equipment Quick Change Drill Chuck (HR2811FT, HR2810T only), Depth Gauge, Side Grip (Tool does not come with bit.)
Items of standard equipment and specifications may differ by country or area.

Makita Corporation

3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
PRINTED IN JAPAN Z23326-2 2007-08 Note : Tool does not come with bit
Powerful and Comfortable Operation
With Low vibration and Highest-in-class efficiency in drilling and chipping

3 MODE

Reversing Switch

Operable by one hand

Compact Body for Better Handling
L-shaped Motor Housing shortens each distance between Rear/ Side Handles and Bit Tip

Hammering with Rotation

Rotation
Chisel rotates full 360 degrees with 40 different locking positions.
More compact than 24mm Rotary Hammers

(HR2800 / HR2810)

Hammering

Powerful

Lighter weight and more compact than 30mm Rotary Hammers
(HR2811F / HR2811FT only)

Spring

Vibration Absorbing Grip
Spring is mounted to absorb vibration.

LED Job Light

Quick Change Chuck
SDS-plus chuck can be replaced to keyless drill chuck in a second.
(HR2811FT / HR2810T only)
(HR2800 / HR2810) (HR2811F)

HR2811F HR2811FT

Rubberized Grip
Provides more control and comfort.
Vibration Absorbing Grip Vibration Absorbing Grip Quick Change Chuck
LED Job Light LED Job Light Photo: HR2811F

Bumper

Protects the surface of workpiece and machine machine.

HR2810 HR2810T

Quick Change Chuck Photo: HR2810

Hammering HR2811F/ FT

Reinforcing bar

Impact Bolt

Striker
HR2810/ T HR2800 Competitor "B"
15.0 20.0 30.0 20.5 28.5 21.0

(m/s2)

2 MODE
Hammering with Rotation Rotation Tool does not come with bit.

Idling Striker

Competitor "B" Competitor "D"

O-Ring catches Striker

Torque Torque Limiter orque
Stops bit rotation when hitting reinforcement.

No Hammering when Idling

Ensures machine's long life.

One-Touch Sliding Chuck

for easy SDS-plus bit changes

Comparison of Vibration