SVENSKA

NEDERLANDS

ESPAOL

ITALIANO

FRANAIS

DEUTSCH

ENGLISH

Integrated Amplifier

PM-KI-PEARL-LITE PM7004

1.PM-KI PEARL LITE_N_ENG_0617.indd

2010/06/21

19:18:26

nSAFETY PRECAUTIONS

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION

CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1. 2. 3. 4. 5. 6. 7. 8. 9.

10. 11. 12.

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time.
IMPOTANT SAFETY INSTRUCTIONS
To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user.

VORSICHT:

Um dieses Gert vollstndig von der Stromversorgung abzutrennen, ziehen Sie bitte den Stecker aus der Wandsteckdose. Der Netzstecker wird verwendet, um die Stromversorgung zum Gert vllig zu unterbrechen; er muss fr den Benutzer gut und einfach zu erreichen sein.

PRECAUTION:

Pour dconnecter compltement ce produit du courant secteur, dbranchez la prise de la prise murale. La prise secteur est utilise pour couper compltement lalimentation de lappareil et lutilisateur doit pouvoir y accder facilement.

ATTENZIONE:

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

19:18:27

DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards: EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-3-3. Following the provisions of Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/EC, the EC regulation 1275/2008 and its frame work Directive 2009/125/EC for Energy-related Products (ErP).

A NOTE ABOUT RECYCLING:

BEREINSTIMMUNGSERKLRUNG
Wir erklren unter unserer Verantwortung, da dieses Produkt, auf das sich diese Erklrung bezieht, den folgenden Standards entspricht: EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-3-3. Following the provisions of low voltage directive 2006/95/EC and EMC directive 2004/108/EC, the EC regulation 1275/2008 and its frame work directive 2009/125/EC for energy-related products (ErP).
This products packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal. This product and the supplied accessories, excluding the batteries, constitute the applicable product according to the WEEE directive.

HINWEIS ZUM RECYCLING:

DECLARATION DE CONFORMITE
Nous dclarons sous notre seule responsabilit que lappareil, auquel se rfre cette dclaration, est conforme aux standards suivants: EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-3-3. Selon la directive 2006/95/EC concernant la basse tension et la directive CEM 2004/108/EC, la rglementation europenne 1275/2008 et la directive 2009/125/EC tablissant un cadre de travail applicable aux produits lis l'nergie (ErP).
Das Verpackungsmaterial dieses Produktes ist zum Recyceln geeignet und kann wieder verwendet werden. Bitte entsorgen Sie alle Materialien entsprechend der rtlichen Recycling-Vorschriften. Beachten Sie bei der Entsorgung des Gertes die rtlichen Vorschriften und Bestimmungen. Die Batterien drfen nicht in den Hausmll geworfen oder verbrannt werden; bitte entsorgen Sie die Batterien gem der rtlichen Vorschriften. Dieses Produkt und das im Lieferumfang enthaltene Zubehr (mit Ausnahme der Batterien!) entsprechen der WEEE-Direktive.
n CAUTIONS ON INSTALLATION VORSICHTSHINWEISE ZUR AUFSTELLUNG PRCAUTIONS DINSTALLATION PRECAUZIONI SULLINSTALLAZIONE EMPLAZAMIENTO DE LA INSTALACIN VOORZORGSMAATREGELEN BIJ DE INSTALLATIE FRSIKTIGHET VID INSTALLATIONEN

Marantz PM-KI-PEARL-LITE/PM7004
/ D&M , (D&M Holdings Inc., Japan). MKI-PEARL-LITE/PM7004 . . , , . 3 ( ) , . , . - 1.
No JP.46.B13676 - 60065-2005 22505-97 51515-99 51317.3.2-2006 51317.3.3-2008 / 16.03.2013

: , , , , .

D&M D&M, 2-1 - -, -, 2108569, D&M Holdings Inc. D&M Building, 2-1 Nisshin-Cho Kawasaki-Ku, Kawasaki-Shi, Kanagawa 2108569, Japan

Getting started

Thank you for purchasing this MARANTZ product. To ensure properoperation, please read this owners manual carefully before using the product. After reading the manual, be sure to keep it for future reference.
Getting started Getting started

Accessories

Check that the following parts are supplied with the product.

Basic connections

Contents

Getting started1

Accessories1 About this manual1 Main features 2 Feautures of the PM7004 and PM-KI-PEARL-LITE 2 Feautures of the PM-KI-PEARL-LITE2 Cautions on handling 3 About the remote control3 Inserting the batteries3 Operating range of the remote control 3 Part names and functions4 Front panel 4 Rear panel 4 Remote control5

Basic operation 8

Before use8 Turning the power on8 Turning the power standby 8 Turning the power off8 Starting playback9 Direct playback using a source audio component9 Muting sound9 Using headphone set9 Starting Recording9
qOwners manual... 1 wPower cord (Cord length: Approx. 1.8 m).. 1 eRemote control (RC003PM)... 1 rR03/AAA batteries... 2
Basic operation Advanced connections Advanced operation

Advanced connections9

Connecting P.DIRECT connectors 9 Connecting pre out connectors10 Connecting the remote control connectors10

About this manual

nnOperation buttons nnSymbols
The operations described in this manual are based mainly on remote control operation. This symbol indicates a reference page on which related information is described. This symbol indicates a supplementary information and tips for operations.

Basic connections6

Preparations6 Connecting cables6 Connecting the audio equipment6 Connecting the speakers6 Connecting the speakers cables 6 Speaker connections7 Connecting players7 Connecting recorders7 Connecting the power cord8

Advanced operations10

Setting Auto standby mode 10

Troubleshooting

Troubleshooting11 Specifications12 Explanation terms 12 Index12
This symbol indicates points to remember operations or function limitations.

Specifications

nnIllustrations
Note that the illustrations in these instructions are for explanation purposes and may differ from the actual unit.

Explanation terms Index

Main features
Feautures of the PM7004 and PM-KI-PEARL-LITE Feautures of the PM-KI-PEARL-LITE

Tri-tone control

This unit has a 3-tone control function for adjusting the midrange sound in addition to the bass and treble sounds so that you can make a more variable sound adjustment according to source and system.
All-Discrete current-feedback phono equalizer
As a phono equalizer amplifier for MM cartridges, a constant current-feedback PHONO equalizer of quality equal to that of the higher-grade model PM-11S2 is used.
All-discrete current-feedback amplifier
Double-shielded triodal transformer
Marantz proprietary current-feedback circuit, using discrete components, is adopted in the pre amplifier and power amplifier. It is a high-speed amplifier using the latest technology developed for the higher-grade amplifiers.
The unit is equipped with a toroidal power transformer to minimize vibration and leakage flux specific to the transformer. Especially to reduce leakage flux, which affects sound quality, the periphery is double-shielded, using a core ring and a short ring.

HDAM-SA3 Technology

Block condenser of large capacity
The V/I converter circuit, which is the key block of the currentfeedback pre-amplifier and power amplifier, is equivalent to the HDAM-SA3 ampmodule developed for such higher-grade models as the PM-11S2.
A large-capacity condenser of 18,000F is used in the power circuit of the power amplifier. In the preamplifier, a 4700F condenser is used.
High-performance volume CD direct buffer amplifier
An input buffer amplifier exclusive for CD is mounted near the CD input jacks. This is a high-speed buffer amplifier made with discrete components, which avoids interference between right and left channels and can send the signals to the pre-amplifier with very high fidelity.
Capacitor for high quality sound Double-layered and Copper-finished chassis High-grade speaker terminals
Improved momentary current supply ability
It is generally known that the sound quality is not necessarily the same even if amplifiers have the same specifiations. Marantz considers the cause to be the power to drive speakers. The power amplifier of this unit has the ability to momentarily supply current of 25 A or more to drive speakers strongly.

Short-power-line layout

For strong momentary current supply, a short power-line layout unifies the power circuit and output stage of the power amplifier section. This layout allows connecting the large-current lines via the shortest route while to arranging the left and right channels symmetrically.

19:18:28

Cautions on handling
Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. Power is supplied to some of the circuitry even when the unit is set to the standby mode. When leaving home for long periods of time, be sure to unplug the power cord from the power outlet. About condensation If there is a major difference in temperature between the inside of the unit and the surroundings, condensation may form on parts inside the unit, causing the unit to fail to operate properly. If this happens, let the unit sit for an hour or two with the power off and wait until there is little difference in temperature before using the unit. Cautions on using mobile phones Using a mobile phone near this unit may result in noise. If that occurs, move the mobile phone away from the unit when it is in use. Moving the unit Turn off the power and unplug the power cord from the power outlet. Next, disconnect the cables connected to other system units before moving the unit.

About the remote control

Inserting the batteries
qRemove the rear cover of the remote

control.

Operating range of the remote control
operate the remote control while pointing it at the remote sensor.
Basic connections Basic operation
wSet two R03/AAA batteries in the battery
compartment in the indicated direction.

Approx. 5 m

Advanced connections Advanced operation
ePut the rear cover back on. NOTE
Replace the batteries with new ones if the unit does not operate even when the remote control is operated close to the unit. The supplied batteries are only for verifying operation. Insert the batteries in the proper direction, following the q and w marks in the battery compartment. To prevent damage or leakage of battery fluid: Do not use a new battery with an old one. Do not use two different types of batteries. Do not attempt to charge dry batteries. Do not short-circuit, disassemble, heat or dispose of batteries in a fire. Do not keep the battery in a place exposed to direct sunlight or in places with extremely high temperatures, such as near a heater. If the battery fluid leaks, carefully wipe the fluid off the inside of the battery compartment and insert new batteries. Remove the batteries from the remote control if it will not be used for a long time. Used batteries in accordance with local regulations on battery disposal.

The unit may function improperly or the remote control may not operate if the remote control sensor is exposed to direct sunlight, or strong artificial light from a fluorescent or infrared light.
Troubleshooting Specifications Explanation terms Index

19:18:29

Part names and functions
For buttons not explained here, see the page indicated in parentheses ( ).

Front panel

q w e r t y

Rear panel

nn PM-KI-PEARL-LITE

q we r t y u

u Q2 Q1 Q0 o i
qPower switch (ON/OFF) (8) wSTANDBY indicator (8)
Indicates the status of the units as follows: Power ON : Off When the protection circuit is activated : Red (blinking).. (6) Standby : Red Power OFF : Off
Q2MID control knob (8, 9) Q3SPEAKERS A/B switch/indicators (9) Q4BASS control knob (8, 9) Q5Headphone jack (PHONES) (9)
You can adjust the i BALANCE, Q0 TREBLE, MID and Q4 BASS control knobs only when SOURCE DIRECT switch is turned off.

nn PM7004

eINPUT SELECTOR knob (9) rInput indicators (8) tMUTE indicator (MUTE) (9) yVOLUME control knob (8, 9) uRemote control sensor (3, 10) iBALANCE control knob (8, 9) oSOURCE DIRECT switch/indicator (9) Q0TREBLE control knob (8, 9) Q1POWER AMP DIRECT switch/indicator (9)

Q2 Q1 Q0 o

qPHONO input connectors (7) wPHONO GND terminal (7) ePRE OUT connectors (10) rPOWER AMP DIRECT IN connectors (9) tSpeaker system terminals
(SPEAKERES SYSTEM A/B) (6, 7)
uAC inlet (AC IN) (8) iRECORDER 2
input/output connectors (7)

oRECORDER 1

yREMOTE CONTROL
input/output connectors (10)
Q0AUX/DVD input connectors (7) Q1TUNER input connectors (7) Q2CD input connectors (7)

19:18:30

Remote control
You can use the supplied remote control to operate this unit and Marantz audio components such as CD players, tuners, DVD players, and tape decks. See Operating Marantz audio components(vpage 5).

nnCD operation

Operation buttons
T.MODE Function Skip Stop Playback Pause Track selection Sound mode selection

nnDVD operation

3 MENU d f ENTER 09 DISPLAY Function Skip Stop Playback Pause Menu Cursor operation Enter setting Enter number Display disc information
qPOWER ON/STANDBY buttons (8)
POWER ON button POWER OFF button SOURCE POWER button You can press this button to switch the mode of Marantz audio components (provided with a power standby function) between power-on and standby.

Basic operation

wSOURCE DIRECT button (9) eInput selector buttons (5) y rINPUT d/f buttons (9) tComponent operating buttons yVOLUME adjustment buttons (8, 9)
MUTE Button VOLUME + / Button

nnTuner operation

P.SCAN/A.TUNE d/TUNE+ f/TUNE Function
nnCassette deck operation
3 CLEAR Function Fast-rewind Fast-forward Stop Playback Pause Counter reset
nnOperating Marantz audio components

Operation

1 Press the corresponding e Input selector button of the audio component for selecting the input source to be used in playback and recording. The remote control operation is switched to operation mode of the selected input source. This units function will be switched accordingly. 2 Operate the audio component. See the table on the right for the buttons you can use. The remote control e Input selector buttons are used to select the input source for this unit and switch the remote control operation mode at the same time. You can operate the remote control of this unit regardless of the remote control mode setting. To use the remote control correctly, also refer to the operating instructions of other components.
preset scan Tuning up Tuning down Preset channel 0/PRESET selection Preset channel 1/PRESET+ selection BAND FM/AM switching 09 Enter number Clear memory CLEAR or input data Save preset MEMO station number Direct frequency F.DIRECT tuning Auto stereo/ T.MODE monaural switching The remote control buttons may not function properly for some Marantz tuners.
Some input terminals of this unit and corresponding input selector buttons on the remote control have different names, as shown below. Remote control buttons The unit input terminals AUX, DVD AUX/DVD CD-R RECORDER1 TAPE, MD RECORDER2
Do not plug in the power cord until all connections have been completed. When making connections, also refer to the operating instructions of the other components. Be sure to connect the left and right channels properly (left with left, right with right). Do not bundle power cords with connection cables. Doing so can result in humming or noise. Do not turn up the volume without a turntable connected to the PHONO input terminals. Doing so will cause humming or noise.
Connecting the audio equipment

Cautions on playing SA(Super Audio) sources: When regular speakers not compatible with SA sources (DVD Audio discs, Super Audio CDs and other sources, including treble components above the audible range), set the properties of the player (DVD Audio player, Super Audio CD player, etc.) for use with regular speakers (or amplifiers). The speakers may be damaged if the volume is set too high when playing SA sources. For instructions on player settings, refer to the operating instructions included with the player.

Connecting the speakers

Connecting the speakers cables
Carefully check the left (L) and right (R) channels and + (red) and (PM-KI-PEARL-LITE(white)) (PM7004(black)) polarities on the speakers being connected to the unit, and be sure to connect the channels and polarities correctly.

Preparations

Connecting cables
Select the cables according to the equipment being connected.
Connect the speaker cables so they do not stick out of the speaker terminals. The protection circuit may be activated if the wires touch the rear panel or if the + and sides touch each other (Protection circuit). Never touch the speaker terminals while the power supply is connected. Doing so could result in electric shock.

Audio cables

Analog connections (stereo) (L) (R)

L R L R

1 Peel off about 10 mm of sheathing from the tip of the speaker cable,
terminal 2 Turn the speaker to loosen it. counterclockwise
then either twist the core wire tightly or apply solder to it.

nnProtection circuit

Stereo pin-plug cable Speaker connections
The protection circuit is be activated in the following situations: If the speaker cable wire touches the rear panel or screws or if the speaker cable wire touches the speaker cables + and sides are touching If the surrounding temperature is extremely high If the inside of the amplifier gets hot to extended use at a high output If the protection circuit is activated, the speaker output is blocked and the power indicator flashes in red. If this happens, unplug the power cord, then check the connections of the speaker cables and input cables. If the unit becomes very hot, wait for it to cool off and improve the ventilation around it. After doing this, plug the power cord back in. If the protection circuit is activated even though there are no problems with the ventilation around the unit or in connections, the unit may be damaged. Turn off the power and then contact a Marantz service center.

Speaker cables

3 Inserttothe speaker cables core wire all the way into the speaker

terminal.

4 Turn the speaker terminal clockwise to tighten it.

Speaker connections

The same signal is output from the SPEAKERS A and B terminals. When only one set of speakers is to be connected, use either the SYSTEM A or B terminals. Speakers A Speakers B

Connecting players

A turntable with an MM type cartridge can be connected to this unit. To use an MC cartridge, please install a step-up transformer. If humming or other noise is generated when the ground wire is connected, disconnect it. Turntable
Getting started Basic connections
Connect the ground wire from your turntable here.

AUDIO OUT GND

AUDIO AUDIO OUT

CD player

AUDIO AUDIO OUT L

L R L R L R

DVD player

nnSpeaker impedance

Speakers used A B A and B
Use speakers with impedances within the ranges shown below to suit how they are used. Impedance 4 - - - 16

Connecting recorders

Recorder-1

AUDIO AUDIO IN L R

L R L R L R L R

Recorder-2

AUDIO AUDIO IN L R AUDIO OUT

AUDIO OUT L R

19:18:31
Connecting the power cord
Wait until all connections have been completed before connecting the power cord. To household power outlet (AC 230 V, 50/60 Hz) Power cord (supplied)
Symbols used to indicate buttons in this manual Button located on both the main unit and the remote control Button only on the main unit Button only on the remote control
BUTTON <BUTTON> [BUTTON]
1 Turn the VOLUME all the way down. Set <BASS>, <MID> 2 the center positions. , <TREBLE> and <BALANCE> to

Turning the power on

Press <ON/OFF>.
Power is turned on. Input indicator for the selected source lights. The unit will be ready to start playback after several seconds.

Before use

<INPUT SELECTOR>
<POWER AMP DIRECT> VOLUME Input indicators <SPEAKERS A/B> SOURCE DIRECT
Insert the plugs securely. Loose connections will result in the generation of noise. Do not use any cord other than the provided power cord. STANDBY indicator <ON/OFF> <BASS> <TREBLE> <BALANCE> PHONES jack <MID>

Turning the power standby

Press [POWER OFF].

The power is set to the standby mode. The STANDBY indicator lights in red.
[POWER OFF] SOURCE DIRECT [POWER ON]
Press[POWER ON] to turn on power from standby mode. You can also turn on power by using either <INPUT SELECTOR> from standby mode.
Power continues to be supplied to some of the circuitry even when the power is in the standby mode. When leaving home for long periods of time or when going on vacation, either press <ON/OFF> to turn off the power, or unplug the power cord from the power outlet.

[INPUTd,f]

VOLUME [MUTE]

Turning the power off

Power is turned off. All indicators will turn off.

19:18:32

Starting playback
Use either <INPUT SELECTOR> or [INPUT d,f] to select an input source you want for playback.
The input indicator for the selected source lights. GSelectable sourcesH

Muting sound

This function mutes the sound by stopping audio output.

Advanced connections

Connecting P.DIRECT connectors
If you use a preamplifier, connect it as shown below, and then you can use this unit as a power amplifier.

Press [MUTE].

AUX/DVD

RECORDER-1

RECORDER-2
You can also select an input source by pressing the Input selector buttons of the remote control. The input source you select is stored in memory even after you turn off power, and the same source is selected when power is turned on again.
The MUTE indicator lights. To cancel the mute operation, press the button again. You can also cancel the mute operation by operating VOLUME of the remote control.
Basic connections Basic connections

Using headphone set

Plug headphones into PHONES jack.
To listen with headphones, turn speaker output OFF.
To switch the POWER AMP DIRECT mode, press and hold <POWER AMP DIRECT> for at least 3 seconds.
Switching <POWER AMP DIRECT> ON, allows the device connected to the Power Amp Direct connector on the rear panel to be played. When ON, the input indicator turns off. Switching <POWER AMP DIRECT> OFF, allows the program source selected using the INPUT SELECTOR knob to be played. When OFF, the input indicator lights up. For details on operations of the preamplifier, refer to the instruction manual supplied with the preamplifier to be used.

nnAdjusting the volume

Adjust the VOLUME to the desired level.
Advanced connections Advanced operation Advanced connections
2 to be used for playback.
Press <SPEAKERS A/B> to select the speaker system
The indicator for the selected speaker system lights.
To prevent hearing loss, do not raise the volume level excessively when using headphones.
3 Start playing back the source. 4 Adjust the VOLUME to the desired level.

nnAdjusting the tone

<BASS> <MID> <TREBLE> <BALANCE> Adjusts the bass sound. Adjusts the midrange sound. Adjusts the treble sound. Adjusts the left and right output balance.

Pre-amplifier

Speaker (L)

Speaker (R)

Starting Recording
Use 1 selecteither <INPUT SELECTOR>toor [INPUT ] to the input source you want record. 2 Set the recorder to recording mode. 3 Start playback of the source you want to record.
Recording will start in sync with the playback operation of the source.

To PRE OUT connectors

Direct playback using a source audio component
Since the audio signals bypass the tone control circuits (BASS/MID/ TREBLE/BALANCE), the music reproduction is more faithful to the original sound. The SOURCE DIRECT indicator lights.
Specifications Explanation terms Index

Press SOURCE DIRECT.

To adjust the tone, turn off SOURCE DIRECT.
When the POWER AMP DIRECT is ON, adjustment of the volume, balance and tone on the main unit has no effect. Adjust the volume on the input device. When the POWER AMP DIRECT is ON, the main unit outputs at maximum volume. Check the output level on the input device before playing it and adjust the volume accordingly.
Connecting pre out connectors
If you use a power amplifier, connect it as shown below, and then you can use this unit as a preamplifier. For connecting speaker systems, refer to the instruction manual supplied with the power amplifier to be used.
Connecting the remote control connectors
When you use this unit connected to Marantz audio components, it sends control signals to operate each component.

Getting started Basic connections Basic operation Advanced connections Advanced operation Advanced connections Advanced operation
Sound is produced from either one The speaker cables are not properly connected. Make sure that the speakers are connected properly. The BALANCE control knob setting position is inappropriate. Set the BALANCE control knob at the appropriate position. speaker only. The left and right channels are reversed. Either the left/right speaker or left/right input cable connections are reversed. Make sure that the speakers are connected correctly. Make sure that the PHONO GND terminal is connected properly. Make sure that the PHONO input terminal is connected properly. Relocate the TV set or turntable in another place. Install the speakers as far away from the turntable as possible. If the turntable is not supplied with an insulating pad, use insulating pad available in the market. Replace with new batteries. Operate within the specified range. Remote the obstacle. Press the correct button. Insert the batteries in the proper direction in accordance with the polarity markers in the battery compartment.
Troubleshooting Troubleshooting
Noise is produced during a record The ground wire from the turntable is disconnected. The PHONO input terminals are not properly connected. playback. A TV set near the turntable is causing the noise. An audio feedback occurs when you The turntable and speakers are too close to each other. turn up the volume during a record The turntable is placed on a rack or floor that vibrates easily. playback. The unit does not function when a Batteries are low. You are operating the remote control outside of the specified remote control button is pressed. range. There is an obstacle between the main unit and remote control. You have pressed the wrong button. Batteries are not inserted in the proper direction as indicated by polarity markers (q and w) in the battery compartment.
Power output (20 Hz 20 kHz simultaneous drive of both channels): Total harmonic distortion (20Hz 20kHz simultaneous drive of both channels, 8 load): Output band width (8 load, 0.05%): Frequency response (CD, 1W, 8 load): Dumping factor (8 load, 20Hz 20kHz): Input sensitivity/Input impedance PHONO (MM): CD, TUNER, AUX/DVD, RECORDER: MAIN IN Output voltage/Output impedance PRE OUT Maximum allowable PHONO input level (1kHz) MM RIAA deviation (20Hz ~ 20kHz) S/N (IHF-A, 8 load) PHONO (MM) (PM-KI-PEARL-LITE) (PM7004) CD, TUNER, AUX/DVD, RECORDER (PM-KI-PEARL-LITE) (PM7004) POWER AMP DIRECT IN. Tone control Bass (50Hz) Mid (900Hz) Treble (15kHz) Power requirement Power consumption (EN60065) Standby power consumption Weight PM-KI-PEARL-LITE PMW x 2 (8 load) 100 W x 2 (4 load) 0.02% 5Hz 60kHz 5Hz 100kHz 3dB 100 2mV/47k 200mV/20k 1.6V/15k 1.6V/600 100mV 0.5dB 87dB (5mV input, 1W output) 85dB (5mV input, 1W output) 106dB (2V input, Rated output) 104dB (2V input, Rated output) 125dB (Rated output) 10dB 6dB 10dB AC 230V 50/60Hz 200W 0.3W 11.2kg 10.5kg

Explanation terms

P Protection Circuit This is a function to prevent damage to components within the power supply when an abnormality such as an overload or excess voltage occurs for any reason. In this unit, the STANDBY indicator blinks and the unit enters standby mode when an abnormality occurs. S Speaker impedance This is certain-rated resistance of the speaker set to an alternating current and expressed in ohms. The smaller the impedance, the greater the output. However, load on the amplifier is increased. Use speakers whose impedance is supported by this unit.
Adjusting the tone 9 Adjusting the volume 9 Auto standby mode 10
BALANCE 4, 8 BASS 4, 8 Batteries 3 Before use 8
Connection Connecting cables 6 Connecting players 7 Connecting recorders 7 Connecting the speakers 6, 7

INPUT SELECTOR 4, 8

MID 4, 8 Mute 4, 8
POWER AMP DIRECT 4, 9 Power cord 8 PRE OUT 4, 10 Protection circuit 6, 12

Remote control 3, 5, 10

SOURCE DIRECT 4, 8 Speaker cables 6, 7 Stereo pin-plug cable 6
For the purpose of improvement, the specifi cations and design are subject to change without notice.

TREBLE 4, 8

VOLUME 4, 8
PM-KI-PEARL-LITE (unit: mm)

PM7004 (unit: mm)

19 328.17.5

110.5 16.5 127

8.PM-KI PEARL LITE_N_Backpage.indd

19:32:01

D&M Holdings Inc. Printed in China 035M