Reviews & Opinions
Independent and trusted. Read before buy Marantz SR4300!

Marantz SR4300

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Marantz SR4300, size: 2.5 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Marantz SR4300About Marantz SR4300
Here you can find all about Marantz SR4300 like manual and other informations. For example: service manual, specs, av receiver, av, price, review, remote.

Marantz SR4300 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Marantz SR4300 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Marantz SR4300 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 1. Page 1 of 1. Average Rating:
kontorotsui 3:24am on Sunday, April 25th, 2010 
What Hi-Fi Sound and Vision said "A Complete Bargain" and Gave it Five Stars The SR4300 A/V receiver has six 80-watt discrete amplifiers (RMS into 8 o...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

INTRODUCTION

FEATURES
BUILT-IN 6 CHANNEL POWER AMPLIFIER
80 watts to each of the six main channels ; the power amp section features an advanced, premium high- storage power supply capacitors, and fully discrete output stages housed in cast aluminum heat sinks.
6.1 CHANNEL PRE-AMP OUTPUTS
6.1 channel pre-amp outputs for connection to external components such as a subwoofer and external power amplifiers.

6.1CH DIRECT INPUT

6.1ch direct inputs accommodate future multi-channel sound formats or an external digital decoder.
96 kHZ/24-BIT D/A CONVERTER FOR ALL CHANNELS
High performance digital circuitry with 96 kHz / 24-bit D/A converter for all 7 channels.
4 DIGITAL INPUTS AND 2 DIGITAL OUTPUTS
4 Digital inputs for connection to other sources, such as DVD player, Satellite tuner, CD player, CD recorder or MD deck. 2 Digital outputs for connection to CD recorder or MD deck.

DTS-ES

DTS-ES decoder built in to decode the impeccable 6.1-channel discrete digital audio from DTS-ES encoded DVD-Video discs, DVDAudio discs and CDs.
30 STATION RANDOM ACCESS PRESET TUNING
High-quality AM/FM tuner with 30 station random access preset tuning.

DOLBY DIGITAL EX

Dolby Digital EX decoder built in to create six full-band width output channels from the 5.1-channel digital audio of DVDs, Digital TV, HDTV, satellite broadcasts and other sources.

RDS FUNCTION

Radio Data System(RDS) provides information on FM broadcasts.

DOLBY PRO LOGIC II

Dolby Pro Logic II decoder provides better spatiality and directionality on Dolby Surround program material and provides a convincing threedimensional sound field on conventional stereo music recordings.

DTS-NEO6

DTS-Neo6 decoder built in to decode 6.1-channel surround sound from any stereo material.

CIRCLE SURROUND II

CIRCLE SURROUND II decoder built in to decode 6.1-channel surround sound from any stereo or passive matrix-encoded material.

SOURCE DIRECT MODE

Source Direct mode bypasses, tone controls and bass management for purest audio quality.
Remote Controler RC4300SR

AAA-size batteries X 2

AM Loop Antenna

s DISP (Display Off) indicator
This indicator lights when the SR4300 is in the display off condition.
6 Main Information Display
This display shows messages relating to the status, surround mode, tuner, volume level or other aspects of units operation.
!2 PHONES jack for stereo headphones

d TUNERs indicators

REAR PANEL

z x c v b n 2

DSS/VCR2 DSS VCR2

MONITOR

DVD IN

VCR1 IN

VCR1 OUT

MONITOR OUT

SUB WOOFER
TV DVD VCR1 DSS/VCR2 DSS VCR2 CDR/MD CDR MD TAPE CD

S-VIDEO

CENTER CENTER
AM R GND IN IN IN OUT IN OUT IN OUT IN OUT IN FRONT SURROUND SURR. BACK SUB WOOFER SURR. BACK SURROUND FRONT R

FM (75)

6.1CH INPUT

PRE OUT

ANTENNA

MODEL NO. SR4300

SERIAL NO.

DIG.OUT OPT

DIG-1 IN

DIG-2 IN

DIG.OUT COAX

DIG-3 IN

DIG-4 IN

SURROUND BACK

CENTER
SWITCHED 100W MAX AC OUTLET

DIGITAL

REMOTE CONTROL

SPEAKER SYSTEMS

z FM antenna terminal (75 ohms)
Connect an external FM antenna with a coaxial cable, or a cable network FM source.

b MONITOR OUT

There are 2 monitor outputs and each one includes both composite video and S-video configurations.
AM antenna and ground terminals
Connect the supplied AM loop antenna. Use the terminals marked AM and GND. The supplied AM loop antenna will provide good AM reception in most areas. Position the loop antenna until you hear the best

n Subwoofer Output

Connect this jack to the line level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. If you are using two subwoofers, either powered or with a 2 channel subwoofer amplifier, connect a Y connector to the subwoofer output jack and run one cable from it to each subwoofer amplifier.
x AUDIO IN/OUT (CD, TAPE, CDR/MD, TV, DVD, VCR1, DSS/VCR2)
These are the analog audio inputs and outputs. There are 7 audio inputs (4 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players,DVD players and etc. The audio inputs and outputs require RCA-type connectors.
m Preamp Outputs (L, R, SL, SR, SB, C)
Jacks for L (front left), R (front right), C (Center), SL (surround left), SR (surround right) and SB (surround back). Use these jacks for connection to some external power amplifiers.

Front left and right speakers, and a center speaker Align the tweeters and mid-range drivers on the three front speakers on the same height as well as possible. Surround left and right speakers, and surround back speaker Place the surround left, right and surround back speakers higher to your ears (70cm 1m). Also place the speakers on the same height.

70cm 1m

Surround Left

Subwoofer Front Left

Use magnetically-shielded speakers for front left, right and the center speakers when the speakers are installed near the TV and the TV is a monitor type.
Surround Back Front Center Front Right Surround Right
Front left and right speakers We recommend to set the front L and R speakers with 45-60 degrees from the listening position. Center speaker Align the front line of the center speaker with the front L/R speakers. Or place the center speaker a little backward from the line. Surround left and right speakers Place the speakers right beside of the listening position or a little forward. Do not place the speakers backward of the listening position. Surround back speaker Place the speaker behind of the listening position. Subwoofer We recommend to use a sub-woofer to have maximum bass effect. Sub-woofer bears only low frequency range so you can place it anywhere in the room.

CONNECTIONS

HEIGHT OF THE SPEAKER UNITS

CONNECTING SPEAKERS

SURROUND BACK SURROUND RIGHT LEFT or POWER AMPLIFIER
INVERT OUTPUT INPUT INPUT LEVEL BTL EXT. CONT. IN REMOTE CONT.

MASTER SLAVE MIN MAX

PASSIVE SUBWOOFER

VIDEO/ +5~13V DC

SYSTEM OUT
SPEAKER SYSTEM MINIMUM 4 OHMS

POWERED SUBWOOFER

TV DVD VCR1 DSS/VCR2 CDR/MD TAPE CD

LEFT RIGHT FRONT

CONNECTING SPEAKER WIRE

1. 2. 3. 4. 5.

Strip away approx. 10 mm of wire insulation. Twist the bared wire ends tight to prevent short circuits. Loosen the knob by turning counterclockwise. Insert the bare part of the wire into the hole in the side of each terminal. Tighten the knob by turning clockwise to secure the wire.
Be sure to use speakers with the specified impedance shown on the rear panel of this unit. To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. Do not touch the speaker terminals when the power is on. It may cause electric shocks. Do not connect more than one speaker cable to one speaker terminal. Doing so may damage this unit.

CONNECTING AN AM OUTDOOR ANTENNA
An outdoor antenna will be more effective if it is stretched horizontally above a window or outside.
Do not remove the AM loop antenna. To avoid the risk of lightning and electrical shock, grounding is necessary.
After all components are connected, initial setup must be performed.

SETUP MENU SYSTEM

The SR4300 incorporates an menu on the front display, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote control.

MENU STRUCTURE

Main Menu 1. INPUT setup CD TAPE CD-R (CD-R/MD) TV DSS (DSS/VCR2) DVD VCR1 Speaker Size Setup SUBW (Subwoofer) L&R (Front Left&Right) CENTER SL&SR (Surround Left&Right) SURR.B (Surround Back) YES / NONE SMALL / LARGE SMALL / LARGE / NONE SMALL / LARGE / NONE YES / NONE
D1 AUTO / D2 AUTO /D3AUTO / D4 AUTO (DigitalAUTO mode) DIG.1 / DIG.2 / DIG3. / DIG4(Digital Fixed mode) ANALOG

2. SPEAKER setup

Speaker Distance Setup L&R (Front Left&Right) C (Center) SLR (Surround Left&Right) SW(Subwoofer) SB (Surround Back) 0.3m 0.3m 0.3m 0.3m 0.3m (1f) (1f) (1f) (1f) (1f) 9.0m 9.0m 9.0m 9.0m 9.0m (30f) (30f) (30f) (30f) (30f)
Speaker Level Setup T.MODE(Test Tone Mode) L (Front Left) C (Center) R (Front Right) SR (Surround Right) SB (Surround Back) SL (Surround Left) SW (Subwoofer) BASSMIX LFE PANORAMA DIMENSION C.WIDTH (Center width) TRUBASS SRS DIALOG L (Front Left) C (Center) R (Front Right) SR (Surround Right) SB (Surround Back) SL (Surround Left) SW (Subwoofer) Surround Mode C (Center) LEV SL (Surround Left) LEV SR (Surround Right) LEV SB (Surround Back) LEV SW (Subwoofer) LEV MANU (Manual) / AUTO -10dB +10dB -10dB +10dB +10dB -10dB +10dB -10dB -10dB +10dB -10dB +10dB +10dB -15dB BOTH / MIX 0dB / -10dB / OFF OFF / ON -10dB -10dB -10dB -10dB -10dB -10dB -15dB -10dB -10dB -10dB -10dB -10dB -15dB +10dB +10dB +10dB +10dB +10dB +10dB +10dB +10dB +10dB +10dB +10dB +10dB +10dB

3. PREFERENCE setup

4. PROLOGIC II setup

5. CS II setup

6. 6.1CH IN setup

7. SURROUND setup

ENTER THE DESIRED MENU ITEM OF THE SETUP MENU

M-CH ST 2CH 6.1CH -IN

1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT)
Four digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. The Input Setup consists of 9 items, which are as below.

S-DIRECT MUTE NIGHT

D1AUTO to D4AUTO : Digital AUTO mode If the input signal from the selected source is digital signal, this unit chooses a digital input automatically. DIG.1 to DIG.4 : Digital FIXED mode The SR4300 chooses a digital input regardless of a input signal from the selected source. ANA : Analog mode
Use this menu to select the digital input jack to be assigned to the input source.
CHANNEL/SKIP TV CDR TUNE/SEARCH DVD MD MODE VCR1 VCR2 DSS CD ATT. TUNER AMP TAPE DISP./RDS P.SCAN PTY

1. 3. 5.

S-DIRECT MUTE

VOLUME NIGHT

Turn on this unit. Press the AMP button to set the amp mode. Press the MENU button or the OK button to enter the SETUP MENU. Press the or cursor button to select the MAIN MENU item. Press the OK button or the MENU button to enter the desired menu item.
After finishing all setup, press the MENU OFF button to exit the SETUP MENU.
Select 1.INPUT in SETUP MAIN MENU with the or cursor button. Press the OK button to enter the menu. Press the or cursor button to select the input source. Press or cursor button to select the input function. Select DxAUTO, DIG.x or ANA for input sources. If you finish these setup, press the or cursor button to select TO MAIN MENU then press the OK button to return the SETUP MAIN MENU. Or press the or cursor button to select EXIT then press the OK button to exit the SETUP MENU.
When a DTS-LD or DTS-CD is playing, this setup is not available. This is to avoid noise being generated from the analog input. If Dx-AUTO is selected and a DVD, compact disc or LD is fast forwarded during playback, decoded signals may produce a skipping sound. In such cases, change the setting to DIGITAL. Same digital input function cannot be set. In this case, the previous setting is set to ANALOG. Same digital input number cannot be set in Digital AUTO mode and Digital Fixed mode. For example, D1AUTO and DIG.1 are not set at same time.

After you have installed the SR4300, connected all the components, and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout. Before you perform the following settings, it is important that you first determine the following characteristics:

SPEAKER SIZE

When setting the speaker size in the SPEAKER SIZE sub-menu, use the guidelines given below. Large: The complete frequency range for the channel you are setting will be output from the speaker. Small: Frequencies of the channel you are setting lower than approx. 100Hz will be output from the subwoofer. If the Subwoofer is set to NONE and the front speakers are set to Large, then the sound may be output from both the left and right speakers.

1. 2. 3. 4. 5. 6.

Select 2.SPEAKER in SETUP MAIN MENU with or cursor button, Press the OK button to enter the menu. The first sub-menu item is Speaker Size setup. Press or cursor button to select the each speaker. Press or cursor button to select the setting of size to each speaker. If you finish these setup, press the or cursor button to select NEXT. Press the OK button to enter the next Speaker Distance setup. Or press the or cursor button to select EXIT then press the OK button to exit the SETUP MENU. Or press the or cursor button to select TO MAIN MENU then press the OK button to return the SETUP MAIN MENU.
MENU STRUCTURE of Speaker Size setup
Speaker 2.SPEAKER Speaker Size setup SUBW Size YES NONE L&R SMALL LARGE CENTER SMALL LARGE NONE SL & SR SMALL LARGE NONE
Select when a subwoofer is connected.
Select when a subwoofer is not connected.
Select if the front speakers are small sized.
Select if the front speakers are large sized.
Select if the center speaker is small sized.
Select if the center speaker is large sized.
Select if no center speaker is connected.
Select if the surround left and right speakers are small sized.
Select if the surround left and right speakers are large sized.
Select if no surround left and right speakers are connected.

SURR.B

YES NONE
Select when a surround back speaker is connected.
Select when a surround back speaker is not connected.

TEST MODE : Selects MANU (manual) or AUTO for generating mode of test tone or cursor button. If you select AUTO by pressing the button, the test tone will be cycled through in a circular pattern which is L (Left) C (Center) R (Right) SR (Surround Right) SB (Surround Back) SL (Surround Left) SW (Subwoofer L. increments of 2 seconds for each channel. Using the and cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all speaker. When you select TO MAIN MENU by pressing the OK button, you can return the SETUP MAIN MENU by pressing the OK button. Or press the or cursor button to select EXIT then press the OK button to exit the SETUP MENU. Or press the or cursor button to select RETURN then press the OK button to return the previous SPEAKER DISTANCE setup. If you select MANU, adjust the output level of each speaker as follow.
+9dB 1 dB interval Reference 1 dB interval -9dB Minimum -10dB (SW -15 dB) 0dB button

2. 5. 1. 5. 1. 3. 5.

3. 4. 5.
When you select MANUAL in T.MODE menu by pressing the or button, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the button. This unit will emit the pink noise from the center speaker.
Press the cursor button again. This unit will now emit the pink noise from the front right speaker. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level. When you select TO MAIN MENU by pressing the OK button, you can return the SETUP MAIN MENU by pressing the OK button. Or press the or cursor button to select EXIT then press the OK button to exit the SETUP MENU. Or press the or button to select RETURN then press the OK button to return the previous SPEAKER DISTANCE setup.
MENU STRUCTURE of Speaker Level setup
Direct selec by remote control Speaker Distance setup Test Tone mode MANU Speaker SW Speaker Level setup SL L C AUTO (Auto)
Speakers that you selected None for in the Speaker Size Setup menu will not appear. The setup level for each channel is memorized for reproduction in all surround mode. To adjust the speaker levels for 6.1-channel input sources, you will need to use the 6.1CH Level Input setup menu.

Listening Positiom SB

Using the and cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker (Note that this can be adjusted to any level between 10 and +10 dB in 1dB intervals).

When Center speaker is set None, then C.WIDTH is set 7. (The display appears C.WIDTH =.)
MENU STRUCTURE of PREFERENCE setup
3.PREFERENCE BASSMIX BOTH
MENU STRUCTURE of PROLOGIC II setup
4.PROLOGIC II setup PANORAMA OFF

MIX LFE 0 dB

DIMENSION

-10 dB

C.WIDTH

TO MAIN MENU EXIT

This sub-menu is to adjust the speaker levels for 6.1-channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level.

2. 5. 1. 3. 5.

Select 5. CS II in SETUP MAIN MENU with or cursor button. Press the OK button to enter this menu. Press or cursor button to select desired item. Press or cursor button to set the level. When you select TO MAIN MENU by pressing the or button, you can return the SETUP MAIN MENU by pressing the OK button. Or press the or cursor button to select EXIT then press the OK button to exit the SETUP MENU.
Select 6. 6.1 CH IN in SETUP MAIN MENU with or cursor button. Press the OK button to enter this menu. Press or cursor button to select desired channel. Using the or cursor button, adjust the volume level of each channel.
TRUBASS: Set the TRUBASS level between 0 and 6 level in 1 level interval with or cursor button. TRUBASS produced by the speakers to be an octave below the actual physical capabilities of the speakers adding exciting, deeper bass effects. SRS DIALOG: Set the SRS DIALOG level between 0 and 6 level in 1 level interval with or cursor button. This can be popped out of the surround audio effects allowing the listener to easily discern what the actors say. If NONE was selected for the Center speaker setting in the Speaker size, then this setting will not appear.
+9dB 1 dB interval Reference 1 dB interval -9dB 0dB button
MENU STRUCTURE of CS II setup
5.CS II setup TRUBASS 0 6

Minimum

SRS DIALOG 0 6
When you select TO MAIN MENU by pressing the or button, you can return the SETUP MAIN MENU by pressing the OK button. Or press the or cursor button to select EXIT then press the OK button to exit the SETUP MENU.

A/D CH-IN

HT-EQ S-DIRECT DIMMER
CHANNEL/SKIP TV CDR TUNE/SEARCH DVD MD MODE PTY
CHANNEL/SKIP TV CDR TUNE/SEARCH DVD
CLEAR MEMORY TUNING/PRESET F/P MODE

MD MODE PTY

A/D HT-EQ S-DIRECT DIMMER MUTE STANDBY
TAPE DISP./RDS CD ATT. P.SCAN

POWER ON/STANDBY

Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOL / buttons on the remote. To increase the volume, turn the VOLUME knob to clockwise or press VOL button on the remote, to decrease the volume, turn it to counterclockwise or press VOL button on the remote.
To select DVD, simply press the DVD button on the front panel or press DVD button on the remote. After you have selected DVD, simply turn on the DVD player and play the DVD. The input name will appear in the display on the front-panel. As the input is changed, the SR4300 will automatically switch to the digital input, surround mode, attenuation, and night mode status that were entered during the configuration process for that source. When an audio source is selected, the last video input used remains routed to the VCR1 & DSS/VCR2 Outputs and Monitor Outputs. This permits simultaneous viewing and listening to different sources. When a Video source is selected, the video signal for that input will be routed to the Monitor Outputs jack and will be viewable on a TV monitor connected to the SR4300.
The volume can be adjusted within the range of to + 18 dB, in steps of 1 dB. However, when the channel level is set as described on page 25, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to +18 dB. (In this case the maximum volume adjustment range is +18 dB - Maximum value of channel level)
ADJUSTING THE TONE(BASS & TREBLE) CONTROL.

POWER MEMO CLEAR SLEEP

SELECTING THE SURROUND MODE

E.G. : AUTO SURROUND

CS EX/ES
During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics. To adjust the bass effect , press BASS or BASS on the remote. To adjust the treble effect , press TREBLE or TREBLE on the remote.

M-CH ST 2CH

Notes :
To select the surround mode during playback, turn the SELECT knob on the front panel or press the surround mode button on the remote.

dts MODE

(dts, Neo:6 Cinema, Neo:6 Music) This mode is for DTS encoded source materials such as LASER DISC, CD, and DVD and some 2channel signal source.
dts : This mode is enabled when playing source materials encoded in dts multi channel. Playing multi-channel encoded 5.1-channel dts sources provides five main audio channels (left, center, right, surround left and surround right) and Low Frequency Effect channel. dts-ES decoding is not available in this mode. The DTS mode cannot use when an analog input has been selected. Neo:6 Cinema, Neo:6 Music This mode decodes 2-channel signals into 6-channel signals using high-accuracy digital matrix technology. The DTS NEO:6 decoder has near-discrete properties in the frequency characteristics of the channels as well as in channel separation. According to the signals to be played back, DTS NEO:6 uses either the NEO:6 CINEMA mode optimized for movie playback or the NEO:6 MUSIC mode optimized for music playback.
PCM-audio (32 kHz, 44.1 kHz or 48 kHz) and analog source material can playback in this mode. MULTI CH. ST
This mode is used to create a wider, deeper and more natural soundstage from two channel source material. This is done by feeding the left channel signal to both left front and left surround speaker and the right channel signal to both right front and right surround speaker. Additionally, the center channel reproduces a mix of the right and left channel.
Pro Logic II mode is available to 2ch input signal which is encoded Dolby Digital or PCM format. PCM-audio signals can be subjected to Pro Logic processing when the sampling frequency is 32 kHz, 44.1 kHz or 48 kHz.

SURROUND MODE

CIRCLE SURROUND II (CSII-CINEMA, CSII-MUSIC, CSII-MONO)

CAUTION

NOTE for DTS signal * Connected DVD-player, laser-disc player or CD-player needs to support DTS-digital output. You may not be able to play some DTS source signals from certain CD players and LD players even if you connect the player to the SR4300 digitally. This is because the digital signal has been processed (such as the output level, sampling frequency, or frequency response) and the SR4300 cannot recognize the signal as DTS data. * Depending on the player used, DTS play may produce short noise. This is not a malfunction. In such cases, select the surround mode the DTS or DTS-ES. * While signals from DTS-laser disc or CD are playing in another Surround mode, you cannot switch to digital input or from digital input to analog input by INPUT SETUP in SETUP MAIN MENU or A/D button. * The outputs for the VCR 1 OUT, DSS/VCR 2 OUT, TAPE OUT, and CD-R OUT output analog audio signals. Do not record from CDs or LDs that support DTS using these outputs. If you do, the DTSencoded signal will be recorded as noise. NOTE for Dolby Digital Surround EX signal * When playing Dolby Digital Surround EX-encoded software in 6.1 channels, it is required to set the EX/ES mode. * Note that some of Dolby Digital Surround EX-encoded software does not contain the identification signal. In this case, set the EX/ ES mode manually. NOTE for 96kHz PCM audio * AUTO, Source- DIRECT, and STEREO modes can be used when playing PCM signals with a sampling frequency of 96 kHz (such as from DVD-Video discs that contain 24 bit, 96 kHz audio). If such signals are input during playback in one of the other surround modes, output from SR4300 will be muted. * Certain DVD player models inhibit digital output. For details, refer to the players operation manual. * Some DVD formatted discs featured copy protection. When using such disc, 96 kHz PCM signal is not output from the DVD player. For details, refer to the player's operation manual.

To record the input source signal you are currently watching or listening to
CHANNEL/SKIP TV CDR TUNE/SEARCH DVD MD MODE VCR1 VCR2 DSS CD ATT. TAPE DISP./RDS P.SCAN PTY

MUTE T

MUTE TUNER
You can change the display brightness of the front display. Press the DIMMER button on the front panel to change the brightness. When this button is pressed, the brightness is changed in the following sequence. dimmed Display Off normal dimmed.
Select the input source to record by pressing the corresponding input selector button. The input source is now selected and you may watch or listen to it as desired. Outputs the currently selected input source signal to the TAPE OUT , CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT outputs for recording. Start recording at the recording component as desired.
Only DISP indicator will light up on the front display in display off condition
If you change the input source during recording, you will record the signals from the newly selected input source. You cannot record the surround effects. Digital input signals are only output to the digital outputs. There is no conversion from digital to analog. When connecting CD players and other digital components, do not connect only the digital terminals, but the analog ones as well.
Press the HT-EQ button on the front panel to turn on the HT-EQ mode. The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments. Activating the HT-EQ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance. The HT-EQ feature can be activated only while in Dolby Pro Logic Mode, or while decoding Dolby Digital or DTS encoded material.

6.1 CH INPUT.

The SR4300 is equipped for future expansion through the use of Multi channel SACD multi channel player or DVD-Audio player. This is selected, the input signals connected to the Front left, Front right, Center, Surround left, Ssurround right and Surround back channels of the 6.1 CH. In jacks are output directly to the front (left and right), center, surround (left and right) and surround back speaker systems as well as the pre-out jacks without passing through the surround circuitry. In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SW (subwoofer) jack. When 6.1 CH. INPUT is selected, the last video input used remains routed to the Monitor Outputs. This permits simultaneous viewing with video sources.

EX/ES DSP

CLEAR Clears the inputting 0-9 Inputs the numeric SETUP/T.TONE Calls up the setup menu of the DVD Cursor OK MENU 4/ player Moves the cursor in setup menu Confirms the setting in setup menu Calls up the menu of the DVD disc Skips forward or previous chapter/ track 5/6 Searches forward or backward 9 ; 2 Stop Pause Play

CLEAR 0-9

CONTROLLING A MARANTZ VCR (VCR1 MODE)
CONTROLLING A MARANTZ CD RECORDER (CDR MODE)
Turns the VCR on and off Selects the tape speed for recording Inputs the numeric Cancels the displayed "Menu" function Moves the cursor in setup menu Confirms the setting in setup menu Calls up the menu of the VCR disc Skips forward or previous chapter/ track
Turns the CD recorder on and off Clears the inputting Inputs the numeric Skips forward or previous track Searches forward or backward Stop Pause Play Record
0-9 MENU OFF Cursor OK MENU

5/; 2 0

5/6 MODE 9 ;
Searches forward or backward Selects sound output mode Stop Goes to still picture and if pushed again increment the picture one by one Play Record
CHANNEL/SKIP CDR TUNE/SEARCH DVD MD MODE VCR1 VCR2 DSS CD ATT. TUNER AMP TAPE DISP./RDS P.SCAN PTY
CONTROLLING A MARANTZ MD DECK (MD MODE)
Turns the MD deck on and off Calls up programming Clears the inputting Inputs the numeric Skips forward or previous chapter/ track Searches forward or backward Stop Pause Play Record
CONTROLLING A MARANTZ TAPE DECK (TAPE MODE)

POWER MEMO

Turns the casette deck on and off Calls up programming Clears the inputting Inputs the numeric Skips forward or previous chapter/ track Searches forward or backward Chages the direction Stop Pause Play Record

TROUBLESHOOTING

In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following users guide ? 3. Are the power amplifiers and speaker working properly ?
SYMPTOM SR4300 cannot be turned up. CAUSE The power plug is not connected.
If the unit does not operate properly, check items shown in the following table. If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz distributor or the Marantz Service Center in your country.
REMEDY Connect the power plug to the outlet. Cancel mute using the remote control unit. See the connection diagram and connect the cables correctly. Adjust the master volume. Select correct position. Disconnect the headphones. (Speakers will not output sound when headphones are connected.) Connect the cable correctly by referring to the connection diagram.

Specifications subject to change without prior notice.

27 mm 440 mm

150 mm

318 mm

164 mm

365 mm

www.marantz.com
You can find your nearest authorized distributor or dealer on our website. JAPAN U.S.A. EUROPE Marantz Japan, Inc. Marantz America, Inc. Marantz Europe B.V. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands
is a registered trademark.
Printed in Japan 2002/XX MITx XXXX851XXX

doc1

AV RECEIVER

SR4300

Black available

SR4300 AV Digital Surround Receiver
The SR4300 A/V receiver has six 80-watt discrete amplifiers (RMS into 8 ohms) and pre-set surround modes including Movie, Hall, Matrix, and Stadium. It has 6.1 channel audio preouts and S-Video and composite video outputs. DTS-ES, Dolby Digital-EX and Dolby ProLogic II processing are built in to ensure access to Europe's most established DVD video and audio standards. An FM/AM RDS tuner with 30 presets, pre-coded system remote control and userfriendly interface all simplify the A/V experience.

S-VIDEO

CAUTION: SHOCK HAZARD,DO NOT REMOVE SCREWS. ATTENTION: RISQUE DE CHOC ELECTRIQUE,NE PAS ENLEVER LES VIS.
is a trademark of SRS Labs,Inc.

CENTER L

Designed and Engineered by MARANTZ JAPAN INC.
MADE IN CHINA FABRIQUE EN CHINE
AM TV IN GND TV DVD IN DVD VCR1 IN VCR1 OUT DSS/VCR2 IN OUT DSS/VCR2 MONITOR OUT CDR/MD DVD IN TAPE CD VCR1 IN VCR1 OUT CENTER MONITOR OUT SUB WOOFER
R FRONT SURROUND SURR.BACK 6.1CH INPUT SUB WOOFER SURR.BACK SURROUND FRONT

IN ANTENNA

OUT AUDIO

PRE OUT

SPEAKER IMPEDANCE FRONT ,CENTER,SURROUND, SURR.BACK : 6-16 OHMS

230V` 50HZ

N2409 OUT DIG.OUT OPT DIG-1 IN DIG-2 IN DIG.OUT COAX DIG-3 IN DIG-4 IN SURROUND BACK CENTER R SURROUND L R FRONT L SWITCHED 100W MAX
SERIAL NO. MODEL NO.SR4300/N1G

(62X23)

SERI NO:MZ000100000001

DIGITAL

SPEAKER SYSTEMS

(IMPEDANCE 6 OHMS)

FEATURES
MULTICHANNEL/SURROUND MODES THX Select / Ultra / Ultra II (SW Upgrade) -/-/THX Surround EX DTS / DTS ES (Matrix) / DTS ES (Discrete, NEO:6) / DTS 96/24 DD / DD-EX Dolby Headphone DPL / DPL II Circle Surround 5.1/CS-ll Virtual Surround Multi Channel Stereo Other surround: Movie, Hall, Matrix, Stadium Auto Surround Mode Detection HDCD Decoder SOUND ENHANCEMENTS Current Feedback Topology Discrete Amplification (All) Toroidal Power Transformer: EI / Toroidal / Super Ring Linear drive power supply CCNE HDAM: metal / copper / gold Symmetric PCB layout Chassis: Metal / Copper D/A Conversion 192/24-bit: Front / All channels A/D Conversion: 96/24 / 192/24 Digital Signal Processor ADDC Video Off High Grade Video Switching Source Direct / Pure Direct Chassis: Metal / Copper System Blocks Shielding: Metal / Copper High grade audio components -/ /CS49326 //-/ /-/-/-/ / /// //// / -/ VIDEO Scart In / Out Composite In / Out (incl monitor out) S- Video In / Out Component In / Out Gold plated In/Out (Cinch) AUDIO Analog In / out Digital Optical In / Out Digital Coaxial In / Out Gold plated In/out OTHER Customized Components Intelligent silent Cooling system Chassis Stabilisation Bracing OTHER GYRO Touch Tuning Random Tuner Presets RDS On Screen Display: Main / Multi-Room Software Upgradable (RS-232)
Preliminary Specifications
Digital (Optical) Headphone Out -/-/-/

SPECIFICATIONS

30 -/AUDIO SECTION Power Output (8 Ohms RMS) Signal to Noise Freq. Response (Dig In, +/- 3 dB) 80 Watts 92 dB 8 - 45 kHz
Freq. Response (Analog In, +/- 3 dB)10 - 100kHz Input Sensitivity TUNER SECTION FM Frequency Range 87.5 - 108MHz 75 / 68 dB 0.5 / 1.0 % 60 dB (+-300kHz) IHF 1.8uV / 16.4 dBf 45 dB 531-1602kHz 50 dB 0,5% (400Hz 30% mod) 70 dB (+-18kHz) 195 mV 47k ohm

IN/OUTPUTS

4/3 2/1 7/4 2/1 2/1 -
S/N Ratio (Mono/Stereo) Distortion (Mono/Stereo) Channel Selectivity Usable Sensitivity Channel Separation TUNER SECTION AM Frequency Range Signal to Noise Distortion Channel Selectivity
Pre- Amplifier Out: 5.1 / 6.1 / 7.1 Channels -//Main Amplifier In Multi-Channel In Multi-Room Audio Out Multi-Room Video Out (CVBS/S-Video) RS232C DC Triggers Speaker Terminal: Click-fit / Screw / WBT Multi-Room Speaker Terminal D.Bus in & out Multi-Room D.Bus in & out External IR in & out AC Outlets: switched / un-switched Front Inputs: audio / Composite / S-Video / 1 -// 1/-

GENERAL

Color: Black / Gold / Silver Metal Front Panel Learnable / Touch Screen / 2-Way Remote control Power Consumption (stereo mode rated power) Detachable Power Cable Maximum Dimension (W x H x D) Weight 440 x 150 x 365 mm 10.7 Kg tbf System remote control: Pre-Programmed / -/-/-/RC4300SR //metal foil
Design and specifications are subject to change by Marantz without notice

www.marantz.com

Features:

Benefits:

Latest surround decoder built in
Wide range full discrete amplifiers 6.1 channel direct input System Remote Control and Marantz D-BUS system Versatile DSP surround mode Digital Inputs
Latest generation of DSP from Cirrus Logic decodes Dolby Digital Surround-Ex, DTS-ES(Discrete/Matrix), Dolby Pro Logoc II, DTS: Neo6, and SRS Circle Surround II. Excellent frequency response and superb sonic perfomance for the highest standard such as SACD and DVD-Audio Direct connection of analogue feeds to allow connection of multi channel formats like SACD Flexible system integration and total control by using one remote handset Multi channel surroud stage from 2 channel materials make listening to CD or radio to a a new live experience 4 x digital inputs enable to connect all digital source directly to the SR4300

Technological glossary:

High quality home cinema with latest featuring The SR4300 equipped with full discrete amplifier for all six channels. Each channels generate 80 Watts throughout the entire frequency range of 10Hz up to 100kHz. It promises to get maximum potential from the latest and highest sound materials such as SACD and DVD-Audio. For D/A conversion, the SR4300 employes 24bit/192kHz DACs. It enables to enjoy maximum potential from the DVD-Audio/Video as well as conventinal CD. DD-EX Dolby Digital EX brings a new dimension of depth, spacious ambience and sound localization to home theatre environment. Feature films originally released in Dolby Digital Surround EX carry the encoded third surround channel in their subsequent DVD releases, as well as onto 5.1-channel digital satellite and terrestrial TV broadcasts. The benefits of DD-EX include more realistic flyover and fly-around effects, a more stable image for atmospheres and music, and a more consistent surround effect throughout the auditorium or home viewing area. The SR6300 provides this effect via one additional rear centre. The overall effect remains one of phenomenal sonic realism, and audible sense of 'being there' that has never before been realised at home. DTS-ES The DTS-ES surround system offering a superb sound quality and a range of formats. The Discrete 6.1 offers the ultimate quality of surround field creation, while the Matrix 6.1 provides compatibility for the existing DTS 5.1 software. And the Neo:6 is to create 6.1 surround stage from any two channel source. Dolby ProLogic II Dolby Pro Logic is capable of producing a Multi Channel soundstage using only a two channel source, meaning that normal TV broadcast can only be decoded using this decoding technique. Now the standard is being successed by the Dolby Pro Logic II format, offering the full frequency range accross all channels and even with a stereo soundfield on the surround speakers. This new experience of two channel decoding adds a whole new and more realistic element to watching TV and is fully compatible with the Dolby Pro Logic standard. Circle Surround II SRS Technologies renovated its 'Circle Surround' technology to the today's standard. Now it is able to create up to 6.1 surround sound from mono, stereo, and Dolby Surround audio material including television and radio programming, VHS movies, classic movies on DVD (Dolby 1.0) and audio CDs. It features an unique "Dialog Clarity" function to improve the ablity of the listener to discern what actors are saying during movie or television viewing and also includes a powerful virtual bass enhancement to deliver the sensation of cinema-like bass in home theater products 6.1 channel input To allow the connection of a separate digital multi-channel decoder, the SR4300 has an 6.1 input of which each channel is completely independent. This input is connected to the power amplifiers with only volume control in between. Future technologies can therefor be easily incorporated and this makes this AV receiver future proof. Versatile DSP surround modes Apart from the defined surround formats, the SR4300 enables several multi channel surround stages to chose from, such as Movie, Hall, Stadium and Matrix. Levels and delay times can be tailored for your listening environment and, of cource, for your preference. D.Bus & System remote control To control entire system with one remote handset, Marantz has designed the D.Bus system. Individual devices inform each other and remote control commands are communicated via this bus line. The SR4300 comes with a system remote control that controls all Marantz equipment with one handset.

 

Tags

Graphire3 YP-K3JAB Price EL-520VA HDW-750 Psac1 Outlook F1022ND Remote Feurio EFW 6205 5890DN BDN Stereo SA-15S1 Kenox S860 CLX-3175FNK 4200N GE2091E 190S7FS Versa SXI N 300 26HF5443 Av Receiver Lexmark Z515 CDX-C570R ZHC9454X Review SK3000 HVR-Z1 MWG 733 Specs ZKC5540W Touch HD Roland E-56 EWT719 XVS650L AVH-P6000DVD DV620 405SX CQ-RDP102N SGH-A885 MR-14EX AJ-D750 FTR9955 AB 880 V-KC902HTM YP-T10jqbh SPA-120 Padrino LE22S81B FT-736R ESR-9753 R4000 BMW 318I HA-845 3000EX 30LB020S4 Latitude C400 Pagescope MTX-2008 AVX-P7000CD Muratec F560 Motoculteur 8000 Server Voice Dect KX-TCD820FX KX-TC1871B CRW2200UX CU-L28dbe5 Recipes Sacred Gold LX-350 Service Manual SX-303RDS NVX200 GCC-4521B Sirocco Av SC-AK48 HDR165 VP-D303 Photo NS-50 Lowrance 3500 278CLT GM-120 Trike Indoor RTS AG-DVC60 I815E SB85-P-020W CDX-L550X S75348KG98 UN55C9000SM EKG6700X Campus VGN-TT11ln B RC-1200 Amarys 100 SHR-5042P Server Player E1210 DVD-1600 Asko T731 DSB-A200C DSC-T77 B

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101