Guvnor Plus Suggested Settings

GV-2 Guvnor Plus

FAT BLUES (Amp: Clean)

CRUNCH (Amp: Clean)

Marshall Amplification plc
Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ, England. Tel : +44 (0)Fax : +44 (0)www.marshallamps.com
Whilst the information contained herein is correct at the time of publication, due to our policy of constant improvement and development, Marshall Amplification plc reserve the right to alter specifications without prior notice. 7 / 05
GRUNGE / HARDCORE (Amp: Clean)

Owners Manual

SCREAMING SOLO (Amp: Clean)

WARNING! 9

IMPORTANT Precautions
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

From The Chairman

I would like to personally thank you for selecting one of our effects pedals. For over 40 years the Marshall name has been synonymous with the greatest guitar tones in music. We have worked hand in hand with guitarists from all levels throughout the world to maintain and improve that special ingredient, The Marshall Sound.

WARNING

Do not expose the apparatus to rain or moisture. Do not expose the apparatus to dripping or splashing. No objects filled with liquids should be placed on or near the apparatus. Do not use this apparatus near water.
Clean only with dry cloth.
Our range of effects pedals gives the opportunity to augment the classic Marshall tone to add Marshall character to a guitar setup. All our pedals are made with the same utmost attention to quality, in both materials and manufacture as our world renowned amplifiers, cabinets and combos, in order to provide you with optimum reliability and tone. I would like to wish you every success with all of your musical endeavours and also your new Marshall effects pedal, which I am sure you will find a pleasure to play for many years to come. Yours Sincerely,
Changes or modifications not expressly approved by Marshall Amplification plc could void the users authority to operate the equipment.
Heed all warnings. Follow all instructions. Keep these instructions.

European Product Only 1

ENGLISH

Introduction

Launched in the 1980s, the original Guvnor became a classic footpedal known for high quality distortion tones. Much loved by pros, semi-pros and amateurs alike, the Guvnor earned itself a special place in the hearts of distortion smitten guitarists the world over. The new Guvnor Plus is an updated version of the original Guvnor. Within the sturdy metal housing lies the tone, feel and sound of the original Guvnor, but with extra features specially designed to add extra power and flexibility to cope with the exacting requirements of todays musicians. The tonal versatility of the Guvnor Plus is such that it is like adding another Marshall amp to your existing set-up. The expanded Gain structure allows you to steer your guitar tone through many different styles. From natural sounding vintage valve amp break-up, ideal for singing blues, to chunky JCM 800 classic rock tones, right through to modern day super-saturation, for liquid sustain and grinding chords. In addition you will also find a Deep control which adds a resonant bass boost, giving you similar feel and response to the resonant thump of a Marshall 4 x 12 cabinet. The Guvnor Plus features a passive bypass for the main signal path to ensure complete tonal integrity and has a quality of tone matched only by its versatility. This booklet provides a complete run down of the Guvnor Pluss features for your information. We have also included a number of suggested settings to help guide you. It should be remembered that these are only a starting point and you should really experiment. When you take the time to explore the many different overdrive and distortion characters of the Guvnor Plus, you wont be disappointed.

Setting Up

Always use good quality shielded leads. Always use 9V regulated DC supply with centre negative. Although it may seem obvious the first action in achieving a good effected sound (be it duration / compression etc.) is to find the perfect bypassed sound. This will then allow the correct level to be set with the effect unit to allow a cut or boost in volume and a realistic tone. On clean channels it is advisable to set the gain (or volume) to a setting of no less than one quarter maximum so as not to get unrealistic results due to any volume dependent tonal shaping on the amplifier preamp.

Features

1. Out Jack
This is the output of the Guvnor Plus and is for connection to the amplifier or to another effects pedal.

2. Gain

This increases the amount of distortion, taking you from vintage breakup, ideal for big crunchy chords and sweet singing blues, to full on grind with super saturation. The Guvnor Plus features the classic Marshall 3 way tone network to guarantee true Marshall tone at all times and to allow you to add unique Marshall character to any rig.

3. Bass

Adjusts the bass frequencies in your tone. Increasing the
amount of bass will generally make your tone warmer and thicker at the bottom end.

Trouble Shooting

CHECK PEDAL CONTROLS CHECK GUITAR

4. Deep

This adds an active resonant bass boost to your tone in a way that cant be replicated with traditional tone controls and has a similar effect to the acclaimed JCM2000 Deep switch. Increasing the amount of Deep will add masses of tight bottom end to your tone giving it real low end resonance and incredible fullness. CHECK AMP CONTROLS DC INLET CHECK BATTERY

CHECK LEADS

5. DC Input
For input of a 9V DC negative regulated power supply should you not wish to use batteries.
WHAT IF NO OUTPUT NOISE IN BYPASS INDICATOR LED NOT ON SOUND TOO TREBLY OR FIZZY SOUND TOO MUSHY OR BASSY UNUSUAL FEEDBACK

6. LED

Indicates when the Guvnor Plus is in operation.

INPUT LEAD

7. Treble
Adjusts the high end frequencies in your tone, an increase making it brighter, sharper and more cutting.

REDUCE TREBLE

8. Mid
Adjusts the middle frequencies in your tone. Adding more middle will fill out your sound and make it fatter. By reducing the amount of middle in your tone you will make it thinner and sharper. Cranking the gain (item 2) up and setting the Mid control to minimum will deliver scooped sounds, ideal for brutal crunch tones.

9. Volume

Adjusts the volume of the Guvnor Plus. This allows you to cut or boost your volume when you switch the pedal on and is ideal for switching from rhythmn to higher volume solo levels. The Volume levels of the Guvnor Plus are greater than previously available on the original Guvnor to allow you to push the front end of your amp harder for even more overdrive.

UNUSUAL HUM

MOVE AWAY FROM AMP

10. In Jack

This is the input jack, for connection directly from your guitar or to another effects pedal if you are linking pedals together.

PICKUPS MAY BE VIBRATING

11. Foot Switch
For switching the Guvnor Plus on and off.

BASS FEEDBACK

Battery Replacement
1. To replace the battery, open the easily accessed coin screw battery cover plate by loosening screw as shown, then disconnect the battery connector lead. 2. Use PP3 or equivalent battery (for improved battery life use alkaline type) 3. Always ensure that the battery is removed when the pedal is not in use for long periods. 4. Dispose of old battery in a safe place.
Unas palabras del Presidente
Quiero agradecerte personalmente el haber elegido uno de nuestros pedales de efectos. Desde hace ms de 40 aos el nombre de Marshall es sinnimo del mejor sonido de guitarra. Hemos trabajado mano a mano con guitarristas de todos los niveles y de todas partes del mundo para mantener y mejorar este ingrediente especial: El sonido Marshall. Nuestra gama de pedales de efectos te da la oportunidad de aumentar el clsico tono de Marshall o aadir personalidad a cualquier equipo de guitarra. Estn fabricados prestando tanta atencin a la calidad de los materiales como el resto de la gama de amplificadores y combos Marshall, para ofrecerte gran fiabilidad y tono. Quiero desearte grandes xitos en todas tus empresas musicales y con tu nuevo pedal de efectos Marshall, que estoy seguro te resultar un placer utilizar durante muchos aos. Sinceramente,

Technical Specification

Power: 9V DC Centre Negative Regulated Current Draw: 9mA Controls: Pedal Switch, Gain, Bass, Treble, Volume, Deep & Mid. Switches: On/Off Switch Indicators: On/Off LED Jacks: Input/Output Jacksockets Input Impedance: 1M Output Load Impedance: max 1k Dimensions: 120mm x 65mm x 55mm Weight: 510 grammes

ESPAOL