TRIMMER PARTS Banta TRIMMER LINE - Clam Shell TRIMMER LINE - 5 LB SPOOLS
Commercial Grade Trimmer Line Part# 380-2043 380-2123 380-2203 380-2383 Size

.065.080.095.105

Commercial Grade Trimmer Line Length in meters

15.24 15.24 12.19 9.14

Length in feet

50 ft 50 ft 40 ft 30 ft

Part# 380-451 380-469 380-477 380-485

.080.095.105.130

2080 ft 1445 ft 1150 ft 765 ft

Length in meters

609.6 426.7 350.5 288.6

1 LB DONUT DISPENSER

Commercial Grade Trimmer Line Part# 380-303 380-311 380-329 380-345 380-337 380-353 Size

.065.080.095.105.130.155

TRIMMER LINE
UNIVERSAL TRIMMER PARTS continues on next page. Following the Universal Trimmer Parts section is our NEW TRIMMER PARTS - O.E.M. section- done in alphabetical order.
611 ft 416 ft 289 ft 230 ft 153 ft 105 ft
182.9 121.9 85.3 70.1 45.7 27.3
GRASS / BRUSHCUTTER BLADE - Nylon and Rubber

TRIMMER LINE 3 LB SPOOLS

Commercial Grade Trimmer Line Part# 380-410 380-428 380-436 380-444 380-448 380-450 Size

.080.095.105.130.155.170

Part# 390-013
Diameter Centre Teeth Thick Hole ID

9 (225 mm) 1 (25.4 mm) 3

Three blade nylon cutter for weed Trimmers, made of long lasting, high strength nylon.

390-021 390-022

9 (225 mm) 10 (255 mm)

1 (25.4 mm) 1 (25.4 mm)

365.210.3 137.2 91.4 85.3
Four blade nylon cutter for weed Trimmers, made of long lasting, high strength nylon.

390-019

9 (225 mm)

1 (25.4 mm)

Eight blade rubber cutter for weed Trimmers. Used on Stihl and many other trimmer makes. Reinforced steel center plate molded into blade for more secure mounting.
390-070 Blade Reducer - For nylon brush blades. To reduce
Note: Dual polymer line. Outer layer prevents welding. High strength inner core resists breaking, re-inforced with Aramid bers.
nylon brushcutter blade centres from 1 (25.4mm) ID to 3/8, 5/8 or 20 mm ID.
(Priced and sold in set of 4 pieces) (While Quantities Last)

TRIMMER PARTS

BRUSHCUTTER BLADES BRUSHCUTTER BLADES

3 Tooth Steel Blade

Part# 720-901
10 (255 mm) 25.4 mm/ 20 mm

(1.00 to.750)

Part# 720-916 720-917 720-918
8 (200 mm) 8 (200 mm) 9 (225 mm) 20mm 1 (25.4 mm) 1 25.4 mm) 70/60 1.8 mm 1.8 mm 1.4 mm
Clearing Clearing Clearing

2.25 mm

Note: Includes 20mm metal reducer bushing for easy mounting on.750 arbors.

720-902

12 (300 mm)

25.4 mm/ 20 mm

NOTE: Blade reducer part# 390-344 can be used in our part# 720-917 and 720-918 steel brushcutter blades to reduce the center ID from 1 to 20mm ID.

4 Tooth

Steel Blade

Part# 720-906 720-907

8 (200 mm) 9 (225 mm) 25.4 mm/ 20 mm

Part# 720-856 720-857

8 (200 mm) 9 (2255 mm) 20 mm / 25.4 mm 20 mm / 25.4 mm 1.5 mm 1.8 mm

Clearing Clearing

1.5 mm
(Replaces STIHL# 4001-713-3801 / 4112-713-3801)

720-908

10 (255 mm)

1.8 mm

MAXI series brushcutter blades are recommended for straight shaft trimmers of 40cc and larger. Rated at 13000 RPMs. (Includes: reducer bushing) Ground edge can be easily re-sharpened with standard saw chain les.
Four-blade steel cutter for Trimmers. All Eight-blades include 20 mm reducer bushing.

XRT Steel Blade

8 Tooth

Part# 720-858

8 (200 mm) 9 (225 mm) 20 mm / 25.4 mm 20 mm / 25.4 mm 1.5 mm 1.5 mm

Part# 720-909 720-910

Usage 720-859
XRT series brushcutter blades are recommended for straight shaft trimmers of 24cc and larger. Rated at 13000 RPMs. (Includes: reducer bushing) Ground edge can be easily re-sharpened with standard saw chain les.

390-043

Brush cutter Blade Protector Universal plastic guard protects steel brushcutter blades when being transported. Fits both 9 (225mm) and 10 (255mm) OD brush cutter blades.Two piece design with two rubber tie straps, that adjust to blade size. (While Quantities Last)
Eight-blade steel cutter for Trimmers. All Eight-blades include 20 mm reducer bushing.
390-344 Blade Reducer - For metal brush blades.
To reduce steel brushcutter blade centers from 1 (25.4mm) ID to 20mm ID. (Sold in multiples of 5)

TRIMMER PARTS UNIVERSAL

140-046

PT2637 17722801110

Banta UNIVERSAL

385-989

Trimmer Harness Heavy Duty - Single shoulder strap. Fully adjustable strap with heavy duty shoulder pad and hanger. Fits most Trimmer and Leaf Blowers.

continued

Application
Starter Handle Plastic starter handle. For use on small equipment applications. Ideal for small trimmers, brushcutters and chain saw applications.

750-890

Ear Protectors - Red General purpose ear protectors offer comfort and economical price. Individually package for ease of display.

385-982 NEW

Trimmer Harness - Deluxe Universal Double Shoulder Strap Deluxe. Double shoulder strap and waist pad. Fully adjustable strap with heavy duty shoulder pad and hanger. Fits most Trimmer and Leaf Blowers.

750-889 NEW

Ear Protector - Foldable General purpose foldable ear protectors offer comfort and economical price. Padded ear cushions for comfort. Adjustable headband size. Compact size for easy storage. Individually package for ease of display. Tested in accordance with ANSI S3.19 (NRR 19 dB).

TRIMMER PARTS UNIVERSAL continued

390-090

Hardware Kit for Weed Butcher II Kit contains: (3) bolts, nuts and washers. (Replaces Weed Butcher# 215202). (While Quantities Last)

385-558

Weed Butcher III This Weed Butcher is a combination using nylon blade with the added cutting power of nylon trimmer line. Used on 21 cc thru 36 cc trimmer models. Reducer bushings will adapt head to most string Trimmers and Brushcutters. Safer then chain type head and metal blades. (Replaces Weed Butcher# 215300). Diameter of cut: 12 (While Quantities Last)

390-500

4111-710-8700
Shoulder Bolt Assembly Fits Stihl and our RotoTrim Disk. Size:.473 shoulder OD X 3/8 long X 1 overall length.
(Priced individually) (Sold in multiples of 3)

385-252

Inner Spool for Veri Replacement Inner Spool for trimmer heads manufactured by VERI. Fits their older VP30 H.D. (heavy duty) Bump Feed type trimmer heads. Size: 3-1/2 OD and 4 OD X 1-7/8 overall height.
NOTE: Only for 2 slot / 2 pin outer drive heads. (While Quantities Last).

390-039

4111-007-1001
Nylon Blade Replacement Nylon Poly Blades for Husqvarna, Jonsereds, Stihl and our 390-000 RotoTrim head. Measures: 4-1/16 long X.475 ID centre hole.
(Priced individually) (Sold in multiples of 12)

385-112

Echo 215602 Echo 215703 Stihl 4112-713-8300

390-170

Nylon Blade with metal edge Metal edge blades, ts models Grasscraft and Allan Clean Cut Hover mower, (Priced individually) also used on Husqvarna and Stihl trimmers. Same as our 390-039 but with metal edge inserts. Measures: 4-1/16 Long X Centre hole: 31/64 X Thickness:.150. (Priced individually)

(Sold in multiples of 3)

Replacement Trimmer Head Eyelet. Fits Trimmer heads found on Echo units and many others. Heavy duty square line eyelets made of bronze, reduce wear and extend the life of the trimmer line. Also helps reduce line weld. Size: 13/64 ID X 5/8 OD X 5/16 HT.

385-138

Head Spring Fits trimmer heads found on Echo, Shindaiwa and Stihl. Found on Compact Twist Feed & Heavy Duty Twist Feed. Size: 7/8 OD X 1 L approximately.

390-025

Hardware Kit for Weed Butcher I Kit contains: (3) bolts, nuts and washers. (Replaces Weed Butcher# 215102 and Echo# 215113).

385-658

Head Spring Found on many Echo trimmer models: GT1100, GT2000, GT2103, GT2400. 2 line Bump Feed and Mini Bump Feed; also found on many Stihl trimmer heads. Measures: 1-3/16 OD X 1 L approximately.

H.D. BUMP FEED TRIMMER HEAD - UNIVERSAL
Part# 385-058 Application
4 Heavy Duty Two Line Bump Feed Head Fits 95% of all Trimmers. - Comes in a clam shell display package - For users of small, medium size trimmers, both curved and straight shaft. Adapter bolts included: 7mm X 1.00 LHM 8mm X 1.25 LHM, 8mm X 1.25 LHF 10mm X 1.00 LHF 10mm X 1.25 LHM, 10mm X 1.25 LHF and 3/8 - 24 RHF. Uses up to.155 diameter trimmer line. See application chart pages 50 - 09 thru 50 - 14
UNIVERSAL TWIST FEED HEAVY DUTY TWIST FEED
MINI BUMP FEED HEAVY DUTY BUMP FEED

A Application

C Arbor Size A B
DOLMAR - see MAKITA / SACHS DOLMAR heading ECHO
GT SERIES: 100, 140, 140A, 140B, 160, 160AE, 200, 200A, 200B, 200BE, 200CE, 230, 1000, 1100, 1100A, 2000, 2000SB, 2100, 2101, 2102, 2103, 2200, 2301, 2400, SRM210AE, SRM2000. SRM SERIES 140, 140A, 140D, 140DA, 200, 200A, 200AE, 200BE, 200CE, 200D, 200DA, 200DB, 200DE, 202DA, 202FA, 210AE, 210E, 210SE, 250, 250E, 300, 300AE, 300AE1, 300AE/1, 300E, 300E/1, 302, 302ADX, 303E, 310, 400AE, 400B, 400BE, 400E, 1500, 1500A, 1501, 2100, 2100SB, 2110, 2200, 2201, 2300, 2301, 2400, 2400SB, 2410, 2500, 2501, 2501S, 2502, 2510, 2601, 3000, 3001, 3010, 3100, 3100S, 3110, 3400, 3410, 3800, 400, 402, 4600, 500, 501,and CLS4600, GT2010, RM310, RM380, RM460, RMA2530, SRA2190, SRM2090L/U, SRM2450, SRM250EL/EU, SRM2510, SRM310U, SRM260S, SRM302BDX, SRM343SL, SRM400, SRM3500, SRM3550, SRM2010/L, SRM2530, SRM300AE, SRM310, SRM3800, SRM402DE, SRM4600. 10mm X 1.25 LHF 385-059 385-012 385-058 or 385-055 (K.S.L) 3/8-24 RHF 385-059 385-012 385-080 385-058

GREEN MACHINE

GRX-525H, SRM3000, SRM3000LP, SRM3000SS, SRM3040M, 525H, 1200, 1500, 1600, 1700, 1900, 1930, 1940, 1950, 2000, 2100, 2130, 2200, 2230, 2300, 2331, 2340, 2345, 2500, 2500LP, 2510LP, 2540, 2540LP, 2600, 2800, 2810, 2840, 2841, 2850, 3000, 3000B, 3000J, 3000LP, 3000M, 3000SS, 3040M, 3050M, 3451, 3541, G2A, G2C, GT20, GT21, GT22, GT25, GT31, GT31B, GT35B, GT40B, GT41. 4000, 4000B, 4000J, 4000LP, 4000M, 4500, 4500LP, 4500LPX, 4600LP, BC250, BC400, D-17, D-18, G4C, SRM4000, SRM4000LP, SRM4000M NOTE: Part# 385-678 - not as shown in reference B Please see www.bantasaw.com for proper image.

8 mm X 1.25 LHM

385-059

385-012

385-080
385-058 or 385-055 (K.S.L)

10mm X 1.25 LHM

385-678

385-058

HK-24 (before 1986), HK-30 (after 1986), HK-33 (before 1986), ST SERIES: 80, 100, 120, 160, 180, 200, 210, 360, 385 - (European) HBC-30, HK-15, HK-18 (after 1-86), HK-24 (after 1-86), HK25, HK-28, HK30 (up to 86), HK-33 (after 86), HK-38, BCH SERIES, BCH20, BCH24, BCH32C, BCH32CDI, BCH33/B/DI/TO, BCH40, BCH48, HBC30, HBC30B, HBC38, PBC3600, PBC3800, PBC4000, PLT3400, ST-155, ST-175, ST-285, ST-385, ST-385CG, ST-485. (ARBOR BOLT COUNTER BORED) AT-160, ST-160, ST-180, ST-200, ST-210, ST-385, ST-485 NBA524, PMB522, TXD508, SX040, FK514, SXD40, TXD508.

385-080 or 385-633

385-058 or 385-055 (K.S.L) 385-058
8 mm X 1.25 LHF (counter bore)

3/8-24 LHF

385-000 385-012 385-058

10 mm X 1.25 LHM 385-059

Note: 385-055 = Kwik Speed Loader Head - see page 50-06 for more information
UNIVERSAL TWIST FEED HEAVY DUTY TWIST FEED MINI BUMP FEED

HEAVY DUTY BUMP FEED

HOMELITE continued

C Arbor Size

10 mm X 1.25 LHF

385-058 or 385-055

HBC38, HBC40, PBC3800, PBC4000, PMB52, HBC48. For Homelite trimmer models ST155, ST165, ST175, ST285 and others with extended spindles > use our part# 385-053 found on page 50 - 05.
UMK422LNA/LTA, UMK431LNA/UNBA
385-058 or 385-055 385-058 or 385-055

HUSQVARNA

24R (up to series 603702) 16R, 22R (up to 1986), 24R (after serial #603702), 25R (up to 1986), 25RL (after 1986). 26LC, 26RLC, 32LC, 32RLC, MONDO, 123C, 216CN, 325CX, 326C

7 mm X 1.0 LHM

385-058 or 385-055 385-435

3/8-24 RHF

385-080 or 385-625
32L, 32LR, 32R, 32RL, 32RLC, 21LCN, MONDO
385-000 385-059 385-012 385-058 or 385-596 or 385-055
122L, 123L, 123LD, 225L, 225LD, 225R, 225RD, 225RJ, 227LD, 232L, 10 mm X 1.25 LHF 232R, 235R, 322L, 322R, 323R, 325LX, 325RX, 326L, 326LX, 326RJX and 326RX. (ARBOR BOLT COUNTER BORED)
16R (after 1986), 18R, 18RL, 22R (after 1986), 22RL, 25R (after 1986), 12 mm X 1.75 LHF 25RL, 36R, 39R, 120L, 120R, 125L, 125LD, 125R, 125RD, 125RJ, 132L, 132LD, 132R, 132RD, 132RJ, 140R, 165RX, 235R, 240R, 240RBD, 244R, 244RS, 245R, 250RX, 252RX, 265RX, 165RX, 235R, 240R, 240RBD, 244X, 245RX, 232L, 232LCAT, 32R, 225R, RD, 232R, 232RCAT, 235RCAT, 125L/LD/R/RB/RJD, 165R.

MTD PRO

ST23, ST26, ST35
385-058 or 385-055 385-058

PIONEER / PARTNER

B25SCC, F15, F16, S16, S24, S51, SF24 B180, B25, B250, Spartan

8 mm X 1.25 LHF

200, 205, B250C/V, S33, S41, S51, SCC and T250

B380, B440

12 mm X 1.75 LHF 3/8-24 RHF
385-001 385-059 385-012 385-625 or 385-080 385-435 or 385-058

POULAN PRO

770, PPC22, PPC25, PPC25E, PPC31-PPC32, PRO SERIES: 111, 112, 114, 115, 117, 559, 609, 770, 800, 900, 1350, 1500, 2400, 2500, 2600, 2610, 2615, 2620, 2700, YARD PRO SERIES: 114-117, 120A-130A, 145, 160, 200 165, 175, 185, 195, 200, 800, 900, 2620, 2820

385-000

RED MAX
BC220DL-BC300DL, BK235FL-BK530DL, BC17-BC32, BC2300DL BC254A, BC260DL, BC261DL, BC262DL, BC340DL, BC341DL, BC342DL, BC2600DL, G2KC, BC2200E, BC2200LDC, BC2301S, BC2601S, BC3400DC, BC340/430/440DWM, BC4400DL, BCX2600S, BCZ2500S, BT2200LDC, SGC2300DL, SGCX2600S, 260DM, 431DWM. BC200, BC2000DL, BT2000, BT2001DL, BC2300DL, ECZ2500S-BC, BCX2600S, BCZ2400SBCZ3000S, Bc250, BCZ2500SWG, BCZ300SW, BC3401DL, BC4401DW, SCGZ2500S / 2600S

7mm X 1.0 LHM

385-058 or 385-055 385-080 385-058 or 385-055 (K.S.L)

8mm X 1.25 LHM

10mm X 1.25 LHF

RYOBI / RYAN / IDC

Universal (Trimmer head comes with mounting bolt) 10mm X 1.25 LHF 385-059 385-012
RYOBI models: 700R, 710R, 720R, 760R, 764R, 770R, 960R; RYAN models: 120, 130, 260, 261, 263, 264, 265, 270, 274, 275, 280; IDC models: 364, 364-1, 365, 500, 520, 530, 540 RYOBI models: 740R, 740R-1, 750R, 775R, 780 series, 780R, 780R-1, 780RB, 780RE, 790R, 840R, 865R, 885R, 990R, 1079R, 2079R, 284-285, 540-580, 789OR. IDC models: 540, 540-1, 540-2, 540 Supreme, 580, 580-1, 580-2, 580 Supreme
SACHS DOLMAR - also see our Makita heading
BC225, LT154, LT225, MS220, MS2300, MS2600, NB2, NBA231, NB, NB01F, NB02, NB16F, NB211, NBF171, NB26, NB31 LT16, LT20, LT210, BC210, BC212, BDC212
385-625 or 385-080 385-609 or 385-080
BC210, BC212, MS340, LT250
385-401 or 385-058 385-058
BC250, Bc330, BC300, BC400, PRO 370 / 400, SD330
10 mm X 1.25 LHM 385-059 3/8-24 RHF 385-059

385-012 385-012 385-080

28151, 79534, 79544, 79621, 79721, 79821, 79826, 79541, 79542, 79551, 79552, 79556, 79580, 79590, 79603, 79604, 79605, 79606, 79608, 79611, 79612, 79613, 79614, 79616, 79621, 79680, 79690, 79703, 79713, 79715, 79717, 79718, 79721, 79772, 79782, 79802, 79804, 79805, 79812, 79814, 79815, 79924, 79925, 79929, 99512, 99515, 99516, 79826, 79821, 79543, 79622, 79623, 79624, 79714, 79725, 79727, 79753, 79754, 79755, 79762, 79821, 79822, 79827, 79828, 79844, 79845, 79846, 79847, 79849, 798471, 79854, 79856, 79857, 79926, 79973, 79975, 791760, 797161, Weedeater Series

SEARS continued

79534, 79541, 79542, 79551, 79555, 79556, 79565, 7957, 7958, 7959, 79611, 79612, 79613, 79614, 79615, 79619, 79621, 7968, 7969, 79717, 79719, 79812, 79813, 79814, 79819, 79532, 79853, 79854, 79855, 79857, 636-79545, 636-7955, 636-79558, 636-796233, 796234M, 796242-796243 PRO SERIES.

10mm X 1.00 LHF

385-597 or 385-058

SHINDAIWA

LT18, T18, LT20, C20, T20, T20A, T35, T230, T230XR, C230, DYB201, DYB202, DYB231, DYB232, T23E, T231 PB35, PB45, C25, C250, C27, F20, R20, R25, R35, T25, T250, T260, T261, T27, T270, T350, VP35, P18, Yardware 220, DYB251, DYB252, DYB254, DYB261, DYB321, DYB322, F18, F20, F230, P18, P21, C23.
385-058 or 385-055 385-633 or 385-080 385-058 or 385-055

SHINDAIWA continued

385-609
B40, B45, C35, BP35, BP45, RC45, DYB351, DYB453, DYB454, B35
FS50, FS50E, FS50F, FS51, FS51AVE, FS55, FS55R, FS60, FS61, FS61AE, FS61E, FS65, FS65AVE, FS65AVRE, FS80E, FS83, FS83R, FS83RT, FS85R, FS85RT, FS86, FS90, FS90AVE, FS91, FS96, FS106

385-419 or 385-058

FR106, FR108, FS44, FS44J, FS44R, FS48, FS52, FS52AVE, 10 mm X 1.0 LHF FS52AVRE, FS56, FS56AVRE, FS62, FS66, FS62AVE, FS62AVRE, FS66AVE, FS66AVRE, FS74, FS74AVE, FS74AVRE, FS76, FS76AVE, FS76AVRE, FS81, FS81AVE, FS81AVRE, FS83, FS83R, FS85RT, FS88, FS106AVE, FS86, FS86AVE, FS86AVRE, FS88, FS96, FS106, FS108, FS120, FS120R, FS350, FS450K, FS550, FS550K, FS200/R, FS55, FS80/R, FS85/R/RX, FS11R, FS110RX, FS250/R. (ARBOR BOLT COUNTER BORED) FS08, FS20, FS150, FS151, FS160, FS180, FS200, FS200AVSE, FS202, FS220AV, FS220AVSE, FS280, FS280K, FS340, FS353AV, FS360, FS410AVE, FS420, FS120, FS120R, FS250, FS250R, FS200R, FS350, FS450K, FS550. 12 mm X 1.5 LHF
Use our 390-000 Rototrim Disc (see page 50-05).
Note: You will need to supply a 12mm X1.5 LH thread bolt to fasten.

TANAKA

AST210, AST7000, SUM250-SUM500, TBC SERIES: 162, 205, 215, 218, 220, 220E, 220SS, 232, 233, 240, 250, 262, 265, 270PF, 300, 301, 321, 322, 325, 355, 373, 400, 420PF, 422, 422C, 425, 500, 501, 2100, 2110, 2211, 2510, 2800, 3010, 4500, 4501, TST218, TST501, TUM220, TBC265SDH, TBC2000/2200, AST250, TUM250, SUM7000, 2000, 265SDH-500DH, TBC200ON. TBC160-TBC215, TBC1600, TST218, 202 TBC200, TBC2100 SUM3, TBC4000

Throttle Control For ST155, ST185 & Bandit trimmers. Overall length: 19, Conduit length: 11

610-141

260-687

08832-02 UP04557

Molded Fuel Line For Chain Saw & Trimmer applications. Measures: 5-1/16 overall length.

125-164

Throttle Control For Easy Reach, Easy Trim and Phantom trimmers. Overall length: 17, Conduit length: 12-5/8
Gas Cap Fits brushcutter models 232R, 235, 322 & 325. Colour: Green
Banta HUSQVARNA & JONSEREDS KAWASAKI & KAAZ cont.

135-213 O.E.M

TRIMMER PARTS - O.E.M

610-402

49043-2063 49043-20701
Spark Plug Boot 45 degree angle. Fits brushcutter models 232R, 235, 322 and 325.
Primer Assembly Fits models KT12, KT18 and KD40. (Primer Elbow # 49049-2057).

560-168

610-119

49019-2065

Starter Pulley For brushcutter models 232R, 235R and 322.
Fuel Line Assembly Fits models TD18, TD22, TD24, TD33, TD40 and TD48.
Trimmer Blade - Nylon Found on many Husqvarna / Jonsereds brushcutter / trimmer models. Measures:.475 hole size X 4-1/16 L. (Sold in multiples of 12)

610-492

49049-2057
Elbow and Primer Fits models KT12, KT18, TD24 and TD33 trimmers.

Will replace 10-67

610-532

49043-2065

Trimmer Blade Nylon with steel insert Same as above with a steel insert. Measures:.475 hole size X 4-1/16 L. (Sold in multiples of 3)
Primer Bulb Fits models TD18, TD24 and TG33.

125-544

51049-2058 310401-6641A
For Starter Springs - see our STARTER PART section For JOHN DEERE - see our HOMELITE & ECHO headings
Gas Cap Fits Brushcutter models TD051. Measures: 1.47 ID X 1.9 OD X.94 HT Black plastic cap vented through thread.

125-546

51049-2057 51649-2057 51049-2091

KAWASAKI & KAAZ

646-142

13018-2078 13081-2194

Homelite 98063-29
Gas Cap Fits Brushcutter / Trimmer model TA024. Measures: 1-7/16 ID X 1-7/8 OD Also found on some Kaaz Trimmers and Husqvarna Blower model 140.

610-418

Clutch Fits model HK-33, TD40 and TD48. Clutch is N.L.A. from Homelite. Found on trimmers/brushcutters using Kawasaki engines. Includes: (2) shoes, (1) spring, (2) bolts and (2) washers. Measures: 2-31/32 OD X 9/16 HT

14069-2056 49116-2064

Tanaka 695-000510
Breather for our 125-546 Used on trimmers and brushcutters, model TA024, used on some KAAZ trimmers

610-400

92059-2113 310370-6816A

125-510

Fuel Pick-up and Pipe Fits models KT12, KT18, DT18, TD24, TD33, TF22.
Gas Cap Found on Japanese built Trimmer and Brushcutters. Measures: 1-3/8 Diameter
Banta KAWASAKI & KAAZ

560-275 O.E.M

13165-2058 311400-344500
TRIMMER PARTS - O.E.M McCULLOCH

610-405 O.E.M

213948 (Fuel Line) 215495 (Grommet)

Toro 41-1880

Starter Pawl Measures: 7/8 OD X 1-1/2 Long

560-273

311901-34418
Echo 177215-42030 Husky 99-323-210 Shindaiwa 70030-75120 Stihl 4215-19J-0400
Fuel Line & Grommet Fits McCulloch, Echo, Toro and Weedeater Trimmers. Grommet ts 3/8 hole. Size: 1/16 ID X 5/32 OD X 7-1/2 long

217387

Echo 132007-04920 Echo 132007-07530
Starter Pulley Fits Kawasaki model TD83 Shindaiwa models F20, TD20, LT20, HT21, C20 Measures: 2-1/16 OD X 7/8 HT

560-283

59101-2067 310401-3441A
Green Machine 309849 Shindaiwa 20000-75120 Stihl 4112-195-040
Fuel Line & Grommet Fits most Trimmer equipped with Kioritz and McCulloch engines. Grommet ts 3/8 hole. Size: 1/16 ID X 3/16 OD X 12-1/4 long

216985

Homelite 49422 Zama# ZF-1
Starter Pulley Fits TD-40 model trimmer. Also ts Echo models SRM1501 & SRM2501, Green Machine models 3000SS, Shindaiwa models T25, C25, C35, GP25. Stihl models FS60, 61, 6J, 66, FS80-90. Measures: 3 OD X.570 ID
Fuel Filter Fits all Mini Chain Saws and Trimmers. For use with 3/32 or 1/8 fuel line. Measures: 1-1/4 long X 1/2 diameter.

Shindaiwa 72910-14320

For Starter Springs - see our STARTER PART section

our AIR FILTERS section

LAWN BOY - For LB air lters - see LAWN BOY see our
Throttle Trigger Universal Brushcutter Trigger control. Universal control body. Short Brushcutter. (Short)
- see our AIR FILTERS section) 125-127

263800

MARUYAMA - (For air Filters
RYAN / RYOBI / LAWN BOY heading
Throttle Trigger Universal Brushcutter Trigger control. Universal control body. Long Brushcutter. (Long)

260-688

224206-02
Gas Cap Fits MC2300, MC2600 and MC3210.
Throttle Cable Fits trimmers with clutch. Conduit Length: 7-1/4, Inner Wire: 14-1/2, Wire Travel: 7-1/2

140-913

261628

260-689

322409
Starter Handle Fits MC2300, MC2600 and MC3210.
Throttle Cable Fits trimmers and chain saws. Conduit Length: 9-1/2, Inner Wire: 10-5/8, Wire Travel: 1
TRIMMER PARTS - O.E.M McCULLOCH continued RED MAX

260-496 O.E.M

300149 300149-01

1100-51113 1130-00602

Green Machine 190025 Green Machine 190111 Hoffco 211325S
Throttle Cable Fits models MAC 2815 and MAC 2816 (Homeowners) and some Silver Eagle, Eager Beaver and Road Runner series trimmers. Braided Inner Wire Total Length: 16 with Z-bend on each end, 7 conduit length.
Clutch Fits models BT2000, BC2001DL and BC2300DL. Size: 2 OD with (2) 5/16 ID mounting holes.

260-497

300372-01

610-410

EC02-8405

(Tube)

Throttle Cable Fits model Mac 3227. (For trimmers with clutch) Braided Inner Wire Total Length: 16, Conduit Length: 7-1/4

EC02-6225

(Weight)
Fuel Pick-up & Primer Assembly Fits Robin / Tass and others. Replaces Robin# 1657.

260-271

McCulloch

125-140

Throttle Control for McCulloch Fits models MAC17 & MAC25, also ts Red Max 323814510 (RH) & 223814520 (LH), Ryobi models RGH600 and RWH900.

EC02-/ 1651 OZ-0669

Gas Cap Fits Robin, Tass and others. Measures: 1-1/2 diameter.
RYAN / RYOBI / LAWN BOY / MTD

125-142

180000 180000R
(For air ters - see our AIR FILTER section)

MITSUBISHI

125-126

KF05011DA

Gas Cap Fits models TL33, TL43 and TL53.
Gas Cap Fits Ryobi models 135PR, 200, 264, 274, 280R, 284, 300BV, 310BVR, 364, 400, 410R, 500, 520, 530, 540, 580, 700R and 790R trimmers. Measures: 1-9/16 threaded ID

560-105

KS02037AA002

181598

Stihl 4130-160-2000
Starter Pulley Fits models TL33, TL43 and TL53

MTD - see our

Bump Head Knob Fits IDC, Ryobi and Ryan Trimmers. Models 130R, 135R electric, 700R, 710R, 720R, 740R, 750R, 760R, 765R, 766R, 770R, 920R, 970R, CS720R and SS720R. Fits Homelite models ST145, 155, 175, 185, 285 with bump feed heads. Size: 1-3/4 OD X 5/16-18 thread.
RYAN / RYOBI / LAWN BOY / MTD SEARS

385-812 O.E.M

147496
385-090 O.E.M Application
for more trimmer heads, see page 50-09
Bump Head Knob Fits Ryobi / Ryan / IDC / Singer. IDC models 195, 395, 580, 580-1 and 780, Ryobi series 780R, 790R, 865R, 885R, 990R and Singer GBC2818. Size: 2 OD X 15/16 HT, 3/8-16 LH external thread size.

390-294

610317
Ryan 610317 Lawn Boy 610317 Snapper 4-2074 Snapper 7042074
Trimmer Head - RH Thread Complete Head. Fits many string trimmers using.080 line with RH thread C/W housing, spool and line, spool retainer, spring and star washer. Fits Sears Weedwacker models: 71-51316, 71-51716, 71-51315, 71-51715 and 71-51425. Also ts Toro 31cc (15 and 18), 28cc (16) models
Head Spring Fits bump feed heads.
SHINDAIWA - (For air lters - see our AIR FILTERS section)

646-250

20021-51102 20021-51101 20021-61101 20011-31200

260-691

Ryan 7418
Throttle Control Fits 700R clutch and non clutch model trimmers. Conduit Length: 15-3/4, Inner Wire: 17, Wire Travel: 1
Clutch Drum For C35 straight shaft trimmer.

646-099

20024-51101 70102-51100
Clutch Shoe Assembly For C35 and B45 model trimmers.

150-118

683856
Ryan 683856 Lawn Boy 683856 K&S 706-16835

646-127

20035-5100 20035-51101
Starter Pulley Fits Ryobi models 265-1, 365-SSR, 284-3, 264-3. Fits Lawn Boy models 1150, 1400CL and 1480. (6 tooth sprocket) Size: 5/8 ID X 2-3/4 OD X 7/8 HT
Clutch Fits Brushcutter models F18, T18, T20, LT20, C20 and TC230, TC1230. Diameter: 2-1/16 Includes: (2) bolts, (2) washers and spring.

646-128

150-120

682030

Ryan 682030 Lawn Boy 682030 Green Machine 167304 Snapper 4-2005 Snapper 7042005
20018-51100 70140-51102 20000-51103 20000-51104
Clutch Fits Brushcutter models TC25 and TC250. Diameter: 2-1/16 Includes: (2) bolts, (2) washers and spring.
Starter Pulley Fits Lawn Boy models 3100, 3130, 3160, 1300, SSI, SSII, 1400, 1460 and 1100. Snapper models 310 and 311. Size: 5/8 ID X 2-3/4 OD top sheave X 2-9/16 OD bottom sheave, 6 tooth sprocket.

610-415

20000-85303

SACHS DOLMAR / MAKITA

Fuel Tube Assembly Fits models T25, C25 and C35 Trimmers. Overall Length: 5-5/8

610-420

20011-85400 20011-85401
20011-85451 20011-85459 Green Machine 309906
Fuel Filter Assembly Fits models T20, T25, C25, C35, B45, LT20, HT20 and C20 Trimmers. Overall Length: 4-3/8

Banta SHINDAIWA

260-905 O.E.M

7291014320

TRIMMER PARTS - O.E.M SHINDAIWA continued
260-12509 70105-83100 NEW
Throttle Cable Fits Shindaiwa models: C270 and T270. Conduit Length: 39-11/32; Cable Length: 42-9/32

125-148

20040-85202

99906-1566

Gas Cap Fits models HT20 and EB45. Measures: 1-1/2 ID, Vented cap

125-150

20000-85200
Gas Cap Fits models T20, T24, T25, C20, C24, C25, C35, B45, LT20 and F21. Measures: 1-1/2 ID X 1-7/8 OD, Not vented Reads: GAS / OIL - 25 : 1 on top of cap.
Flail Trimmer Head / Rototrim Disk Fits straight shaft trimmers. Easy to install by using brush blade hardware. Comes complete as shown with (2) extra sets of nylon blades and (4) nylon reducer bushing. (Uses our 390-039 or
390-170 blades and 390-500 shoulder bolts)

70030-75120

Echo 177215-42030 Husky 99-323-210 Kawasaki 311-34418

SNAPPER

For Starter Spring - see our STARTER PARTS section 43
Starter Pulleys Fits models F20, TD20, LT20, HT21 and C20. Measures: 2-1/16 OD X 7/8 HT

4-2110 7042110

Echo 131004-06320

20000-75120

Green Machine 309849 Kawasaki 59101-2067 Kawasaki 310401-3441A
Starter Pulley Fits models T25, C25, C35 & GP25. Measures: 3 OD X.570 ID. Fits Green Machine model 3000SS. Stihl models FS60, 61, 6J, 66, FS80-90.

3-5512 7035512

Homelite DA 06486 Homelite UP00106 John DeereUP00106

560-284

20020-75120
Starter Pulley Fits model B45. Size: 2-9/16 OD
Gas Cap Fits models Z625CDV, Z625CD, Z725CDV, Z825SD, Z725CB, D830SD, D830CB, D830SB, Z725SE & Z7825CE. Measures: 2 OD X 1-19/32 threaded ID.

4-2074

Lawnboy 610317 Ryobi 610317

260-258

70036-83110
Throttle Control Fits models C20 and C25 trimmers. Overall length: 23-1/2, Conduit length: 20
260-12507 62074-83110 NEW

125-102

4126-350-0501C 4133-350-0501
Gas Cap Fits models: FS56, FS66, FS72, FS74, FS76, FS81, FS86, FS88 and FC72. Measures: 1-1/2 ID X 1.83 OD
Throttle Cable Fits Shindaiwa model: T272. Conduit Length: 13-3/4; Cable Length: 16-7/16
TRIMMER PARTS - O.E.M STIHL continued STIHL

125-109 O.E.M

4112-350-0500 4114-350-0502 4114-350-0504
4112-713-8300 4110-713-8300
Echo 215703 Echo 215602 Shindaiwa 72005-92630

TRIMMER PARTS - O.E.M Banta WEEDEATER / POULAN WEEDEATER / POULAN

615-513 O.E.M

530-071835
Walbro 188-513 Walbro 188-513-1

430-930

530-090824
Primer Bulb Assembly Fits WT-119C and WT265 Walbro carburetors. Found on many Poulan / Weedeater trimmer applications as well as many others. Mounting plate measures: 1-5/16 L X 13/16 W, Mounting holes
on 27mm centers. (2) line primer with the same sized lines.
Trigger Switch Fits Weedeater / Poulan trimmers.

260-692

530-036744

150-348

530-069291
Throttle Control Fits Featherlite trimmers. Overall Length: 16-3/4, Conduit Length: 13-1/4 (While Quantities Last)
Starter Pulley Kit Fits models 175, 185, 185R, 195, BC30B, GTI15, 15T, 16, 16D, 16 Super, 17, 17C, 17LE, 17T, 17XP, 18, 18K, 18KT, 18T, HP series 22, 22T, 28, 28P, 30T and 30SB. Size: 2-3/4 OD, 6 tooth, includes retainer screw

385-320

530-401183 530-093387 530-069319
Poulan 530-069319 Poulan 530-093387 Poulan 530-401183 John Deere PT3931 Hoffco 212213S Echo 207378

150-372

530-069400
Starter Pulley Kit Fits models 110, 113, 115, 165, 25H0SST, BC2400, BC24N, FL21, Featherlite, LT17, LT1700, LT7500, PE3500, PL200, PL500, PLT245 and Prolite gas trimmers. Size: 2-3/4 OD, 4 tooth, includes retainer screw
Release Button Fits Weedeater / Poulan Trimmers. Fits 75 - 85% of curved shaft models. Fits Tap-n-Go 1 and some Poulan and Husqvarna units. Size: 3 OD X 1 HT, Colour: black
(Use with our 385-312 Cover) (While Quantities Last)

385-324

530-340591 530-340592 530-092635 530-092636

150-284

530-026048
Starter Pulley Fits 1500, 1700 and XR series Trimmers. Measures: 2-5/8 diameter
Release Button and Cover Fits Weedeater / Poulan Trimmers. Size: 2 OD (button), 3-11/16 OD X 2 ID (cover) Colour: green (While Quantities Last)

385-326

530-092068
John Deere Pt3924 Hoffco 212210S Echo 207375

145-524

530-024451 530-023783 530-026791 530-069232
Plastic Adapter Fits Weedeater / Poulan Trimmers. Size: 1-3/4 Flange OD X 7/8 ID X 31/64 HT Colour: White (While Quantities Last)
Starter Rope Assembly Fits XR series Trimmers. Measures: 24-1/2 long with molded plastic end

385-327

952-711527 530-084743 248287B 248285B

145-928

530-026112
Starter Rope Assembly Fits XR series Trimmers. Measures: 35 long without molded plastic end.
Spool with Line Fits Weedeater / Poulan Trimmers. Model XT25. Size:.861 ID X 2.404 OD spool, 1.830 OD knob X 1.790 HT
For Starter Spring - see our STARTER PARTS section