SAFETY INSTRUCTIONS

About this manual Please observe the following safety instructions carefully before putting the unit into operation. Take note of the warnings on the unit and in this manual. Always keep the instruction manual near at hand. If you sell or pass on the product, make sure to include this manual together with the unit. Do not let young children use electrical devices unattended! Swallowing batteries may be fatal. Therefore always keep the unit and batteries inaccessible to young children. If a battery has been swallowed, consult a doctor immediately. Also, keep the plastic packaging out of reach for children to avoid danger of suffocation. Setting the product up safely Choose a flat, firm surface to set the product on. Make sure that some distance from any walls is ensured no foreign bodies or fluids get into the unit (e.g., do not place vases on the unit) the unit does not get into contact with dripping water, splash water or humidity the unit is not exposed to direct sunlight the unit is not exposed to excessive heat, e.g. from radiators no open fire sources, such as candles, are placed close to the unit Keep the mains connections accessible. Connect the unit to an easily accessible power socket (230 V ~ 50 Hz) close to the unit. In case the unit has to be disconnected quickly, the plug has to be within easy reach. In order to avoid tripping, do not use an extension lead. When absent for a long period of time or during a thunderstorm, pull out the AC mains plug. Do not repair the unit yourself. In case the power supply cord or the unit is damaged, pull out the AC mains plug immediately. Under no circumstances attempt to open or repair the unit yourself. There is danger of electric shock! Refer all servicing to our Service Centre or to another qualifed workshop. CD-Player The CD player is a Class 1 laser product. The unit is equipped with a safety system that prevents the emergence of dangerous laser beams during normal operation. To avoid injury to the eye, do not manipulate or damage the safety system of the unit. Cleaning the unit Always disconnect the AC mains plug before cleaning the unit. To clean the unit, only use a moistened, soft cloth. Do not apply chemical solvents or cleaning agents, as they may damage the surface and/or labelling of the unit.

Seite 13

GENERAL

Supplied Accessories

2 remote controls (adult / children) 2 sets of batterien, each 2 x 1.5 Volt "AA" SCART cable User's manual and guarantee documents

About audio CDs and DVDs

Audio-CD- Aufbau Data on an audio CD is divided into sections called "tracks", each of which is given a track number:

In this Manual

This DVD player plays DVD-video and audio CDs including MP3CDs. The following symbols in this guide mean: Description refers to playback of DVD video discs. Description refers to playback of audio CDs. Description refers to playback of MP3-discs. Description refers to playback of VCDs. MP3 Moreover, this DVD player can play MP3-CDs, which like computer disc can be divided into folder, subfolders and individual files. DVD structure Video DVDs are divided into sections called "titles" and into subsections called "chapters", each of which is given a title or chapter number: Title 1 Title 2
Normally the first title of a DVD consists of licence and supplier information. The next title is usually the film itself. Further titles may consist of e. g. Making-of documentaries, film previews or information on the actors. Please observe: Playback conditions are preset on some DVD discs, and these playback conditions take priority over user operatios on this player. If a function you selected does not operate as desired, this function my not be realised on the CD.
LOADING BATTERIES IN THE REMOTE CONTROLS
Open the battery compartment cover. 2. Insert two "AA" batteries, with each one oriented correctly. 3. Close the cover
PLEASE NOTE: - Do not mix alkaline and manganese batteries. - Do not mix old and new batteries.

Seite 14

HOOK UPS
PLEASE NOTE: Connect the DVD player directly to a TV (not to a VCR). Be sure to turn off the power to all components in the system before connecting another component. If necessary, refer to the user's manual of the TV, stereo system or other components connected. Be sure that the colours of the jacks and plugs match up when using video/audio cables. Be sure to keep the player connection cables separate from the TV antenna cable when you install the player, because it may cause electrical interference when you are watching television programs. Do not place TV on top of this DVD player, unless it is the compatible Medion TV set "MD 3723" or "MD 40518".

Connecting to a TV using a SCART cable
The easiest connection between the TV and DVD, which at the same time provides an very good picture, is the SCART cable (included).
Connecting to a TV using a S-VIDEO OUT and AUDIO cable
Alternatively, you may use a S-VIDEO OUT cable together with an AUDIO cable to output the sound.
In order to output the sound on a stereo system, connect the DVD as shown here:

Seite 15

HOOK UPS (CONT.)
Connecting to a Amplifier Equipped with Digital Input Jacks
To connect the DVD to an Amplifier equipped with digital input jacks, such as MD deck or DAT deck, use an audio coaxial digital cable for the audio connections:
NOTE: Set Dolby Digital or MPEG to OFF for audio output in the SETUP MENU. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
Connecting to a Dolby Digital decoder or receiver ("home theatre")
If using the DVD player to playback a DVD in a 5.1 channel Dolby Digital surround format, the DVD player outputs a Dolby Digital or MPEG data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or MPEG decoder, you can enjoy a more convincing, realistic ambience such as can be heard in movie theatres. Use an audio coaxial digital cable for the audio connections:
The illustration shows the ideal loudspeaker positions: 1 Left front speaker 2 TV set 3 Center speaker (on top or beneath the TV set) 4 Subwoofer (can be placed anywhere in the room) 5 Right front speaker 6 Listening position 7 Left rear speaker 8 Right rear speaker
NOTES: When connecting the DVD to a Dolby Digital decoder, set DOLBY DIGITAL to ON in the SETUP MENU. However, set DOLBY DIGITAL to OFF when not using a Dolby Digital decoder. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

Seite 16

PLAYING A DISC
Unless stated, all operations described are based on the remote control use. Some operations can be carried out on the unit. NOTE: If a feature or function is not available, a Disney-icon will appear on the screen.
Basic Playback Searching Titles
Turn on the power of the TV and, if necessary, any other components connected to the DVD. Make sure the TV (and audio receiver) are set to the correct channel. To turn on the DVD, press POWER. Press OPEN/CLOSE to open the disc tray. Place a disc in the tray with the label facing up. Press PLAY. The tray closes. Normally, playback starts automatically. If not, press PLAY again. Depending on the DVD, a title menu might appear on the screen first (see "Title Menu"). PAUSE To interrupt playback, press PAUSE. The picture will freeze. Press PLAY to resume normal playback. STOP Press STOP to stop playback. The picture will disappear. A resume message appears on the screen. Press PLAY to resume playback at the point where playback was stopped. To stop playback completely, press STOP a second time. Numerical buttons Press the numerical buttons for the desired track number. On the screen appears an entry field with two or three digits (e. g. 5). If the desired title has less than two or three digits, enter the first empty digits with zeros: for "title 5" enter "05" in a two-digit field, "005" in a three-digit-field. Playback will start automatically. SKIP During playback, press SKIP or repeatedly to move to another track. once to go the beginning of the current track. Press SKIP

You can check the status of the current disc by pressing DISPLAY during playback:
Press DISPLAY once: The elapsed and remaining playing time of the current track will be shown. once: The elapsed and remaining playing time Press DISPLAY of the total disc time will be shown.

Fast Forward/Reverse

Press DISPLAY once: The name of the current title will be shown. Press DISPLAY twice: The name of the current title, the elapsing time, the repeat setting and the playback status will be shown.
During playback, press or. With DVDs, press repeatedly to select the required forward or reverse speed: x 2, x 4, x 8, x 16. To return to normal speed, press PLAY.

Slow Forward/Reverse

During playback, press PAUSE. or ( not ). Then press Press repeatedly to select the required speed: 1/2, 1/4, 1/8. To return to normal speed, press PLAY.
Press DISPLAY once: The elapsed and remaining playing time of the current chapter will be shown. Press the number buttons to go to another chapter directly (e. g. "02" for chapter 2). twice: The elapsed and remaining playing time Press DISPLAY of the current title will be shown. Press the number buttons to go to another title directly (e. g. "02" for title 2). three times: The current repeat setting and, if Press DISPLAY applicable, the layer number will be shown: L 0 = layer 0; L 1 = layer 1). Press DISPLAY once: The elapsed and remaining playing time of the current chapter will be shown. Press another time DISPLAY to leave the function.

Seite 17

PLAYING A DISC (CONT.)

Disc Menu MP3 Playback

DVD normally contain menus to navigate the disc and access special features. Press the appropriate numerical key or use the arrow keys to highlight your selection. Press OK to confirm. NOTE: Please note that it depends on the DVD if the disc- or title menu appears when pressing the corresponding key. If the menus cannot will appear on the screen. be called up through the keys, Disc Menu To call up the disc menu of the DVD, press MENU. The disc menu normally contains the selection of audio languages, subtitles, and chapters. to select an item and OK to confirm Press an arrow key the selection.

When a CD with MP3 files is inserted, the MP3 menu will appear on the TV screen. A group or folder is indicated by a folder icon. to select the desired group or track. Press or If a group is selected (folder icon), press or OK to choose a subfolder or track. To return to the superiour folder, press. Then press PLAY or OK to play the tracks, starting from the one you have chosen. Press STOP to stop playback. NOTE: The unit recognizes a maximum of 600 folders or files.

JPEG playback

If a CD with MP3 images is inserted, the JPEG menu appears on the screen. A group or folder is indicated by a folder icon. To open a folder, press OK. or. The selected picture will be displayed Select a picture with in the image preview area. Press OK to view the picture in screen size. Now all pictures will appear subsequently for some seconds ("slide show"). If you want to stop the slide show, press STOP. In order to access the first folder (or the folder on the highest level), press "001" with the numerical buttons. Rotating the pictures This is how you can rotate the pictures: : Rotates the picture by 90 clockwise : Rotates the picture by 90 anti-clockwise : Mirrors the picture horizontally : Mirrors the picture horizontally

Repeat

The Repeat function is only available during playback.
REPEAT TITLE/CHAPTER Press REPEAT during playback. The repeat mode changes with each pressing of the button as follows: CHAPTER (repeat current chapter) > TITLE (repeat current title) > OFF (repeat off) > etc. NOTE: The repeat function is not available with some scenes. REPEAT TRACK Press REPEAT during playback. The repeat mode changes with each pressing of the button as as follows: TRACK (repeat current track) > ALL(repeat complete disc) > OFF (repeat off) > TRACK etc.
Press REPEAT during playback. The repeat mode changes with each pressing of the button as as follows: REPEAT ONE (repeat current track) > REPEAT FOLDER (repeat the current group) > repeat off) > etc.
REPEAT A-B Press A B at your chosen starting point. A on the screen.

A appears briefly

Press REPEAT A-B A B again at your chosen end point. A B A-B appears briefly on the screen. The playback of the defined sequence begins. To exit the sequence, press REPEAT A-B A B again. NOTES: The repeat A-B section can only be set within the current title (DVD) or track (CD). The Repeat A-B function is not available with some scenes in DVD.

Seite 18

DVD SETUP
In the STOP-mode, press SETUP There are two main setups: QUICK SETUP to open the DVD Setup Menu. COUNTRY-CODE Some DVDs include languages which are not listed in for the audio language, the subtitle language or the disc menu language. To select such a language, you can enter 4-digit-country-code. Select the last item of the language list: "OTHER", with OK. A fourdigit entry field opens. Enter the four-digit-code of the desired language according to the list at the end of this manual. Display Menu TV ASPECT: see above ("Quick Setup"). AUTO POWER OFF (default: ON): turns the player off automatically after 30 minutes of no use. Audio Menu DRC (Dynamic Range Control) Default: OFF. Set to ON to compress the range of sound volume, that is to reduce loud passages and enforce quiet passages ("night setting"). DOLBY DIGITAL: see "Quick Setup". DOWN SAMPLING Setting ON: If the digital coaxial output is used, ("home theatre"), media coded with a frequency of 96 kHz will be down-sampled to 48 kHz. Setting OFF: The media will be output in their original frequency. For these settings, the menu DOLBY DIGITAL must be set to ON. Parental PASSWORD When asked to enter a password for the first time, enter a four-digit number with the remote control. Remember this new password. Confirm with OK. The factory setting is now deleted. To change the password, select CHANGE. Enter the new four digit password, then press OK. NOTE: If you have forgotten the password, enter 1-2-3-4. PARENTAL LEVEL Confirm with OK to open the menu. A list with nine levels opens, ranging from 1 to 8 and ALL. Setting ALL: There is no parental lock. Level 8 (ADULT): DVDs with any rated scenes will be played. Levels 7-2: Only DVDs with scenes rated the same as or lower than the chosen level will be played. Level 1(KID-SAFE): For DVDs which are suitable even for young children.

and FULL SETUP

Navigate in the menus Use the arrow keys or to select one of the main setups. To enter a setup menu, press OK. The first menu item will be highlighted. Select one menu item (submenu) with or and confirm with OK to open the submenu. In the submenus, select an item with or and confirm with OK to edit this setting. To return to the superiour menu, press. To leave the Setup, press SETUP.
PLAYER MENU Select a language for the player menu (On-Screen-Display): English, French, Spanish, German, Dutch, Italian, Swedish, Danish, or Portuguese. TV ASPECT 4: 3 Pan & Scan: A 4:3 TV displays the picture in full height, but crops it at the sides. 4: 3 Letter Box: A 4:3 TV set shows a 16:9 picture with black bars at the top and bottom 16:9 WIDE: Selection for TV with 16:9 format. VIDEO OUT SCART/CVBS: Setting for a connected TV which does not support the RGB colour system. SCART/RGB: Setting for a connected TV which supports the superiour RGB colour system. DOLBY DIGITAL ON (default setting): Must be selected when the player is connected to a Dolby Digital Decoder. OFF: Can be selected when the player is not connected to a Dolby Digital Decoder.

Language Menu NOTE: A language can only be chosen if it is recorded on the disc. With many DVDs, the languages can also be chosen in the disc menu. AUDIO LANG: Spoken language. SUBTITLE: Language for the subtitles. DISC MENU: Language for the disc menu. PLAYER MENU: Language for the player menu (On-Screen-Display). To select a language, scroll down with the button.

Seite 19

TECHNICAL DATA
Power source: 230 V ~ 50 Hz Power consumption: 15 W Standby power consumption: < 5 W Batteries: 2 sets 2 x 1.5 Volt, R6/LR6 "AA" Colour TV system PAL Compatible disc formats: DVD, DVD-R/RW, MP3, Audio CD, CD-R/RW, VCD, JPEG When playing audio-CDs, only play CDs wihich are labelled as follows:

DVD region code:

Digital-analogue-converter: 24 Bit MP3 coding: ISO 9660 format Please note: There are numerous, often not standardized techniques of CD recording and copying protection, as well as a great variety of blank CD-Rs and CD-RWs. Therefore reading mistakes or delays may occur in rare cases. This is no malfunction of the device. Subject to change without notice

Laser classification:

Laser class 1
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other right owners. Use of this copyright protection technology must be authorised by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited. The symbols DOLBY, PRO LOGIC and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. This product has been manufactured under license from Dolby Laboratories Licensing Corporation.

DISPOSAL

Packaging All packaging and packaging materials that are no longer required can and should be recycled. Device At the end of its life, the appliance must not be disposed of in household rubbish. Enquire about the options for environmentallyfriendly disposal. Batteries Do not dispose of used batteries in the household rubbish! They must be deposited at a collection point for used batteries.

Seite 20

Seite 21
Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew 0923 Hindi Hungarian Icelandic Indonesian Interlingua Interlingue Inupiak Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kinyarwanda Kirghiz Kirundi Korean Kurdish Laothian Latin Latvian;Lettish Lingala Lithuania Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Occitan Oriya Oromo Panjabi Pashto;Pushto Persian Polish Portuguese Quechua 1721 Rhaeto-Romance Romanian Russian Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish Turkmen Twi Ukrainian Urdu Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu 2621

Seite 10

Seite 11

FUNCTIONS

FRONT PANEL
1. 2. 3. 4. 5. 6. (SKIP) to skip chapter/tracks backwards (SEARCH/SKIP) 7. to skip chapter/tracks forward 8. (OPEN/CLOSE) to open/close the disc tray 9. Troughs for the "feet" of the Disney TV set (POWER/Standby LED) to switch the player ON or OFF Infrared sensor (STOP) to stop playback Disc Tray (PLAY/PAUSE) to start, interrupt or resume disc playback

REAR VIEW

10. MAIN (AC Power Cord) connect to a standard AC outlet 11. AUDIO OUT (Left/Right) connect to AUDIO inputs of an amplifier, receiver or stereo system 12. VIDEO OUT connect to a TV 13. S-VIDEO OUT connect to a TV with S-Video inputs 14. COAXIAL (Digital audio out) connect to AUDIO inputs of a digital (coaxial) audio equipment 15. SCART output connect to the 21-pin scart jack of a TV

REMOTE CONTROL

1. 2. 3. 4. 5. 6. fast reverse motion (PLAY/PAUSE) to start playback/pause playback temporarily adult remote control in the picture: "Mickey"-Design kid's remote control in the picture: "Princess"-Design (STOP) to stop playback 17. (POWER) switch DVD player ON or OFF 0-9 numerical buttons (SETUP) to access or remove the DVD setup menu (MENU) to display the menu of a DVD disc 8./9. / / / ) 10./15 Arrow keys ( (down/up/left/right) to navigate to an item in a menu 9./15. , (SKIP) to skip to chapters/tracks (REPEAT) 11. repeat chapter, track, title, all (OPEN/CLOSE) 12. to open/close the disc tray 13. (DISPLAY) to access the display screen during DVD or Audio CD playback 14. fast forward motion 16. (ENTER) to confirm a menu selection A B (REPEAT A-B) repeat a specific segmen

Seite 12

TABLE OF CONTENTS
Safety Instructions... 13 General.... 14 Loading batteries in the remote control. 14 Hook ups.... 15 Playing a disc.... 17 DVD Setup... 19 Technical Data... 20 Language Country Codes... 113

SAFETY INSTRUCTIONS

About this manual Please observe the following safety instructions carefully before putting the unit into operation. Take note of the warnings on the unit and in this manual. Always keep the instruction manual near at hand. If you sell or pass on the product, make sure to include this manual together with the unit. Do not let young children use electrical devices unattended! Swallowing batteries may be fatal. Therefore always keep the unit and batteries inaccessible to young children. If a battery has been swallowed, consult a doctor immediately. Also, keep the plastic packaging out of reach for children to avoid danger of suffocation. Setting the product up safely Choose a flat, firm surface to set the product on. Make sure that some distance from any walls is ensured no foreign bodies or fluids get into the unit (e.g., do not place vases on the unit) the unit does not get into contact with dripping water, splash water or humidity the unit is not exposed to direct sunlight the unit is not exposed to excessive heat, e.g. from radiators no open fire sources, such as candles, are placed close to the unit Keep the mains connections accessible. Connect the unit to an easily accessible power socket (230 V ~ 50 Hz) close to the unit. In case the unit has to be disconnected quickly, the plug has to be within easy reach. In order to avoid tripping, do not use an extension lead. When absent for a long period of time or during a thunderstorm, pull out the AC mains plug. Do not repair the unit yourself. In case the power supply cord or the unit is damaged, pull out the AC mains plug immediately. Under no circumstances attempt to open or repair the unit yourself. There is danger of electric shock! Refer all servicing to our Service Centre or to another qualifed workshop. CD-Player The CD player is a Class 1 laser product. The unit is equipped with a safety system that prevents the emergence of dangerous laser beams during normal operation. To avoid injury to the eye, do not manipulate or damage the safety system of the unit. Battery disposal Empty batteries do not belong in the household refuse. The batteries must be disposed of at a designated disposal/recycle point. Cleaning the unit Always disconnect the AC mains plug before cleaning the unit. To clean the unit, only use a moistened, soft cloth. Do not apply chemical solvents or cleaning agents, as they may damage the surface and/or labelling of the unit.

Seite 13

GENERAL

Supplied Accessories

2 remote controls (adult / children) 2 sets of batterien, each 2 x 1.5 Volt "AA" SCART cable User's manual and guarantee documents

About audio CDs and DVDs

Audio-CD- Aufbau Data on an audio CD is divided into sections called "tracks", each of which is given a track number:

In this Manual

This DVD player plays DVD-video and audio CDs including MP3CDs. The following symbols in this guide mean: Description refers to playback of DVD video discs. Description refers to playback of audio CDs. Description refers to playback of MP3-discs. Title 1
MP3 Moreover, this DVD player can play MP3-CDs, which like computer disc can be divided into folder, subfolders and individual files. DVD structure Video DVDs are divided into sections called "titles" and into subsections called "chapters", each of which is given a title or chapter number: Title 2
Normally the first title of a DVD consists of licence and supplier information. The next title is usually the film itself. Further titles may consist of e. g. Making-of documentaries, film previews or information on the actors. Please observe: Playback conditions are preset on some DVD discs, and these playback conditions take priority over user operatios on this player. If a function you selected does not operate as desired, this function my not be realised on the CD.
LOADING BATTERIES IN THE REMOTE CONTROLS
Open the battery compartment cover. 2. Insert two "AA" batteries, with each one oriented correctly. 3. Close the cover
PLEASE NOTE: - Do not mix alkaline and manganese batteries. - Do not mix old and new batteries.

Seite 14

HOOK UPS
PLEASE NOTE: Connect the DVD player directly to a TV (not to a VCR). Be sure to turn off the power to all components in the system before connecting another component. If necessary, refer to the user's manual of the TV, stereo system or other components connected. Be sure that the colours of the jacks and plugs match up when using video/audio cables. Be sure to keep the player connection cables separate from the TV antenna cable when you install the player, because it may cause electrical interference when you are watching television programs. Do not place TV on top of this DVD player, unless it is the compatible Medion TV set "MD 3723" or "MD 3721".
Connecting to a TV using a SCART cable
The easiest connection between the TV and DVD, which at the same time provides an very good picture, is the SCART cable (included).
Connecting to a TV using a S-VIDEO OUT and AUDIO cable
Alternatively, you may use a S-VIDEO OUT cable together with an AUDIO cable to output the sound.
In order to output the sound on a stereo system, connect the DVD as shown here:

Seite 15

HOOK UPS (CONT.)
Connecting to a Amplifier Equipped with Digital Input Jacks
To connect the DVD to an Amplifier equipped with digital input jacks, such as MD deck or DAT deck, use an audio coaxial digital cable for the audio connections:
NOTE: Set Dolby Digital or MPEG to OFF for audio output in the SETUP MENU. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
Connecting to a Dolby Digital decoder or receiver ("home theatre")
If using the DVD player to playback a DVD in a 5.1 channel Dolby Digital surround format, the DVD player outputs a Dolby Digital or MPEG data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or MPEG decoder, you can enjoy a more convincing, realistic ambience such as can be heard in movie theatres. Use an audio coaxial digital cable for the audio connections:
The illustration shows the ideal loudspeaker positions: 1 Left front speaker 2 TV set 3 Center speaker (on top or beneath the TV set) 4 Subwoofer (can be placed anywhere in the room) Right front speaker Listening position Left rear speaker Right rear speaker
<< Video Out << Digital Out >> Digital Audio Input >> Video Input
NOTES: When connecting the DVD to a Dolby Digital decoder, set DOLBY DIGITAL to ON in the SETUP MENU. However, set DOLBY DIGITAL to OFF when not using a Dolby Digital decoder. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

Seite 16

PLAYING A DISC
Unless stated, all operations described are based on the remote control use. Some operations can be carried out on the unit. NOTE: If a feature or function is not available, a Disney-icon will appear on the screen.
Basic Playback Searching Titles
Turn on the power of the TV and, if necessary, any other components connected to the DVD. Make sure the TV (and audio receiver) are set to the correct channel. To turn on the DVD, press POWER. Press OPEN/CLOSE to open the disc tray. Place a disc in the tray with the label facing up. Press PLAY. The tray closes. Normally, playback starts automatically. If not, press PLAY again. Depending on the DVD, a title menu might appear on the screen first (see "Title Menu"). Numerical buttons Press the numerical buttons for the desired track number. On the screen appears an entry field with two or three digits (e. g. 5). If the desired title has less than two or three digits, enter the first empty digits with zeros: for "title 5" enter "05" in a two-digit field, "005" in a three-digit-field. Playback will start automatically. SKIP During playback, press SKIP or repeatedly to move to another track. once to go the beginning of the current track. Press SKIP PAUSE To interrupt playback, press PAUSE. The picture will freeze. Press PLAY to resume normal playback.

You can check the status of the current disc by pressing DISPLAY during playback:
STOP Press STOP to stop playback. The picture will disappear. A resume message appears on the screen. Press PLAY to resume playback at the point where playback was stopped. To stop playback completely, press STOP a second time. Press DISPLAY once: The elapsed and remaining playing time of the current track will be shown. once: The elapsed and remaining playing time Press DISPLAY of the total disc time will be shown.

Fast Forward/Reverse

Press DISPLAY shown. twice: The name of the current title, the elapsing Press DISPLAY time, the repeat setting and the playback status will be shown. once: The name of the current title will be
During playback, press or. With DVDs, press repeatedly to select the required forward or reverse speed: x 2, x 4, x 8, x 16. To return to normal speed, press PLAY.

Slow Forward/Reverse

Press DISPLAY once: The elapsed and remaining playing time of the current chapter will be shown. Press the number buttons to go to another chapter directly (e. g. "02" for chapter 2). twice: The elapsed and remaining playing time Press DISPLAY of the current title will be shown. Press the number buttons to go to another title directly (e. g. "02" for title 2). three times: The current repeat setting and, if Press DISPLAY applicable, the layer number will be shown: L 0 = layer 0; L 1 = layer 1). Press another time DISPLAY to leave the function.
During playback, press PAUSE. or. Then press Press repeatedly to select the required speed: 1/2, 1/4, 1/8. To return to normal speed, press PLAY.

Seite 17

PLAYING A DISC (CONT.)

Disc Menu MP3 Playback

DVD normally contain menus to navigate the disc and access special features. Press the appropriate numerical key or use the arrow keys to highlight your selection. Press OK to confirm. NOTE: Please note that it depends on the DVD if the disc- or title menu appears when pressing the corresponding key. If the menus cannot will appear on the screen. be called up through the keys, Disc Menu To call up the disc menu of the DVD, press MENU. The disc menu normally contains the selection of audio languages, subtitles, and chapters. to select an item and OK to confirm Press an arrow key the selection.
When a CD with MP3 files is inserted, the MP3 menu will appear on the TV screen. A group or folder is indicated by a folder icon. to select the desired group or track. Press or If a group is selected (folder icon), press or OK to choose a subfolder or track. To return to the superiour folder, press. Then press PLAY or OK to play the tracks, starting from the one you have chosen. Press STOP to stop playback. NOTES: The unit recognizes a maximum of 255 folders and 256 files. The folders can be organised into a hierarchy of up to 8 levels.

JPEG playback Repeat

The Repeat REPEAT TITLE/CHAPTER Press REPEAT during playback. The repeat mode changes with each pressing of the button as follows: CHAPTER (repeat current chapter) > TITLE (repeat current title) > OFF (repeat off) > etc. NOTE: The repeat function is not available with some scenes. REPEAT TRACK Press REPEAT during playback. The repeat mode changes with each pressing of the button as as follows: TRACK (repeat current track) > ALL(repeat complete disc) OFF (repeat off) > TRACK etc. : Rotates the picture by 90 clockwise : Rotates the picture by 90 anti-clockwise : Mirrors the picture horizontally : Mirrors the picture horizontally > Rotating the pictures This is how you can rotate the pictures: function is only available during playback. If a CD with MP3 images is inserted, the JPEG menu appears on the screen. A group or folder is indicated by a folder icon. To open a folder, press OK. or. The selected picture will be displayed Select a picture with in the image preview area. Press OK to view the picture in screen size. Now all pictures will appear subsequently for some seconds ("slide show"). If you want to stop the slide show, press STOP. In order to access the first folder (or the folder on the highest level), press "001" with the numerical buttons.
Press REPEAT during playback. The repeat mode changes with each pressing of the button as as follows: REPEAT ONE (repeat current track) > REPEAT FOLDER (repeat the current group) > repeat off) > etc.
REPEAT A-B Press A B at your chosen starting point. A on the screen. A appears briefly Press REPEAT A-B A B again at your chosen end point. A B A-B appears briefly on the screen. The playback of the defined sequence begins. To exit the sequence, press REPEAT A-B A B again. NOTES: The repeat A-B section can only be set within the current title (DVD) or track (CD). The Repeat A-B function is not available with some scenes in DVD.

Seite 18

DVD SETUP
In the STOP-mode, press SETUP There are two main setups: Quick Setup Navigate in the menus Use the arrow keys or to select one of the main setups. To enter a setup menu, press OK. The first menu item will be highlighted. Select one menu item (submenu) with or and confirm with OK to open the submenu. In the submenus, select an item with or and confirm with OK to edit this setting. To return to the superiour menu, press. Audio Menu DRC (Dynamic Range Control) Default: OFF. Set to ON to compress the range of sound volume, that is to reduce loud passages and enforce quiet passages ("night setting"). DOLBY DIGITAL: see "Quick Setup". DOWN SAMPLING Setting ON: If the digital coaxial output is used, ("home theatre"), media coded with a frequency of 96 kHz will be down-sampled to 48 kHz. Setting OFF: The media will be output in their original frequency. For these settings, the menu DOLBY DIGITAL must be set to ON. Parental PASSWORD When asked to enter a password for the first time, enter a four-digit number with the remote control. Remember this new password. Confirm with OK. The factory setting is now deleted. To change the password, select CHANGE. Enter the new four digit password, then press OK. NOTE: If you have forgotten the password, enter 1-2-3-4. PARENTAL LEVEL Confirm with OK to open the menu. A list with nine levels opens, ranging from 1 to 8 and ALL. Setting ALL: There is no parental lock. Level 8 (ADULT): DVDs with any rated scenes will be played. Levels 7-2: Only DVDs with scenes rated the same as or lower than the chosen level will be played. Level 1(KID-SAFE): For DVDs which are suitable even for young children. To leave the Setup, press SETUP. and Custom Setup. Display Menu TV ASPECT: see above ("Quick Setup"). AUTO POWER OFF (default: ON): turns the player off automatically after 30 minutes of no use. to open the DVD Setup Menu. Enter the four-digit-code of the desired language according to the list at the end of this manual.

Quick Setup

PLAYER MENU Select a language for the player menu (On-Screen-Display): English, French, Spanish, German, Dutch, Italian, Swedish, Danish, or Portuguese. TV ASPECT 4: 3 Pan & Scan: A 4:3 TV displays the picture in full height, but crops it at the sides. 4: 3 Letter Box: A 4:3 TV set shows a 16:9 picture with black bars at the top and bottom 16:9 WIDE: Selection for TV with 16:9 format. DOLBY DIGITAL ON (default setting): Must be selected when the player is connected to a Dolby Digital Decoder. OFF: Can be selected when the player is not connected to a Dolby Digital Decoder.

Custom Setup

Language Menu NOTE: A language can only be chosen if it is recorded on the disc. With many DVDs, the languages can also be chosen in the disc menu. AUDIO LANG: Spoken language. SUBTITLE: Language for the subtitles. DISC MENU: Language for the disc menu. PLAYER MENU: Language for the player menu (On-Screen-Display). To select a language, scroll down with the button. COUNTRY-CODE Some DVDs include languages which are not listed in for the audio language, the subtitle language or the disc menu language. To select such a language, you can enter 4-digit-country-code. Select the last item of the language list: "OTHER", with ENTER. A four-digit entry field opens.

Seite 19

TECHNICAL DATA
Power source: 230 V ~ 50 Hz Power consumption: 15 W Standby power consumption: < 5 W Batteries: 2 sets 2 x 1.5 Volt, R6/LR6 "AA" Colour TV system PAL/NTSC
Compatible disc formats: DVD, DVD-R/RW, MP3, Audio CD, CD-R/RW, JPEG When playing audio-CDs, only play CDs wihich are labelled as follows:
DVD region code: Please note: There are numerous, often not standardized techniques of CD recording and copying protection, as well as a great variety of blank CD-Rs and CD-RWs. Therefore reading mistakes or delays may occur in rare cases. This is no malfunction of the device. Subject to change without notice
Digital-analogue-converter: 24 Bit MP3 coding: ISO 9660 format
Laser classification: Wavelength: Pulse duration: Laser radiation hazard:
Laser class nm xxxx xxxxxx
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other right owners. Use of this copyright protection technology must be authorised by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorised by Macrovision Corporation. Reverse engineering or disassembly is prohibited. The symbols DOLBY, PRO LOGIC and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. This product has been manufactured under license from Dolby Laboratories Licensing Corporation.