Preliminary Information: Product available early 2011
Allen-Bradley Micro800 Family of PLCs
Featuring Allen-Bradley Connected Components Workbench Programming and Configuration Software
Micro800 PLCs and Connected Components Workbench Software
As a machine builder, are you looking to save money on acquisition costs and machine assembly time?
The next generation of micro PLCs from Rockwell Automation is your answer. The Allen-Bradley Micro800 PLC family, together with the Connected Components Workbench software, sets a new global standard for convenience and ease of use, while providing just enough control capability to match your lower-end application.

Just Enough Control

Wide range of small-size controllers (from 10-48pts) designed for low cost, standalone machines Plug-in modules personalize the Micro800 controller, so you pay only for the capabilities you need
Convenience and Connectivity ity
Entire family shares common components mponents and accessories Embedded USB for easy programming mming Simple serial and EtherNet/IP communications mmunications Removable terminal blocks for easy installation sy and maintenance (select form factors) tors)
Easy to Install and Maintain
IEC 61131-3 standard instructions Point-to-Point data exchange for simplified communication Automatic Device Replacement

One Software

Connected Components Workbench software is used for PLC programming and HMI, Drives, and Motion configuration A common user experience helps reduce the learning curve through ease of use Available as a free download
Part of the Connected Components Bundle o
Application aids make selection and application easy Appl Pre-built HMI screens and sample programs Pr Panel layout, Bill of Materials and Wiring Diagrams using E-Tools Pa Preferred compatibility within the bundle of components Pref Reduced supply chain costs Redu Source everything from your local Allen-Bradley Distributor So
OPERATOR INTERFAC OPERATOR INTERFACE ERF

SAFETY SAFETY

SENSOR & SWITCHES SOR SORS SWITCHES

CONNECTIVITY ONNECTIVITY

DRIVE DRIVE
Micro810 Smart Relay Micro PLC Micro830 Economical Micro PLC with Simple Motion

Micro810

The Micro810 controller functions as a smart relay with high current relay outputs, but with the programming capabilities of a micro PLC. As part of the Micro800 family, the Micro810 controller shares programming environment, Plug-Ins and accessories. 12-pt form factor provides: 8A outputs eliminates the need for external relays DC models allow 4 inputs to function as 4 0-10V analog inputs Program download via USB programming port (adapter required) Optional 1.5 local LCD for monitoring/modifying application data (variables). It also functions as a backup memory module. Configure and run core smart relay function blocks without programming (LCD required) 18-pt form factor and 26-pt form factor additionally have: Embedded non-isolated serial port for HMI and communications to other devices Up to 2 Plug-In slots for adding analog I/O, serial port, etc.

Micro830

Designed for standalone machine control applications which require simple motion using PTO. Flexible communications and I/O capabilities with up to five Plug-Ins. Different controller types sharing same form factor and accessories Form factor based on number of I/O points embedded in the base: 10, 16, 24, or 48 Controllers include built-in support for up to 4 axes of motion As many as three Pulse Train Outputs (PTO) As many as six High-Speed Counter inputs (HSC) 100KHz speed of PTO and HSC available on 24V DC models Single axis moves supported via PLCopen Motion instructions Home, Stop, MoveRelative, MoveAbsolute, MoveVelocity Use motion plug-in modules to increase performance and extend number of controllable axes (as many as four axes) Embedded Communications USB programming Non-isolated serial port (RS232/485)

Micro850 Expandable Micro PLC with EtherNet/IP 2085 Expansion I/O Modules

Micro850

Designed for applications that require more digital and analog I/O or higher performance analog I/O. Ideal for applications that can benefit from the embedded EtherNet/IP communications (messaging only), which can be used to interface to PCs, PanelView Component HMIs, Kinetix drives and PowerFlex drives Same form factor as 24pt and 48pt Micro830 but with 2085 Expansion I/O (up to 4) and embedded EtherNet/IP
2085 Expansion I/O for Micro850 controllers
Easy to install and maintain with removable terminals and LED status High density digital and analog I/O; high accuracy Resistance Temperature Detector and Thermocouple
Catalog Number 2085-IQ16 2085-IQ32T 2085-OV16 2085-OB16 2085-OW8 2085-OW16 2085-IA8 2085-IM8 2085-OA8 2085-IF4 2085-IF8 2085-OF4 2085-IRT4 2085-ECR Description 24V 16 Point Sink/Source Input 24V 32 Point Sink/Source Input 24V DC 16 Point Sink Output 24V DC 16 Point Source Output 8 Point Normally Open Relay 16 Point Normally Open Relay 120V AC 8 point Input 240V AC 8 point Input 120/240V AC 8 Point Output 4 Channel Analog Voltage/Current Input 8 Channel Analog Voltage/Current Input 4 Channel Analog Voltage/Current Output Thermocouple/RTD/mV End cap
* Please see online catalog for product availability

Micro800 Plug-In Modules

Change the Personality of the Base Unit Controller with Plug-In Modules
Extend the functionality of embedded I/O without increasing the footprint of your controller. Improve performance by adding additional processing power or capabilities. Add additional communication functionality. Utilize Encompass Partner expertise to add enhanced capabilities with tighter integration to the controller.

Plug-Ins

Analog Input / Output (2-channel / 4-channel, non-isolated) Customize with an unprecedented amount of embedded Analog I/O for a micro PLC. Up to 20 Analog inputs. Resistance Temperature Detector/Thermocouple (2-channel, non-isolated) el, no Makes temperature control possible when used with PID with autotuning. a Transforms the low cost Micro810 controller into a single loop temperature controller. Trim Potentiometer (6-channel, analog input) Low cost method of adding six analog presets for speed, position and temperature control. Embedded into the controller to avoid casual access by operators. Serial Port RS232/485 (isolated) Address even the most intensive serial communications tasks with Modbus RTU and ASCII protocol support. Up to five additional serial ports. ime Cl Micro830/850 Backup Memory with High Accuracy Real-Time Clock One touch backs up Data Log and Recipes. Supports removal and insertion under power so data can be retrieved without stopping controller. Can also be used to clone/update Micro800 application code. Adds precision real-time clock function without needing to calibrate or update.

Category Catalog Number Description 4 to 8 Point 24VDC Digital I/O with sink or source outputs 2080 Digital I/O IQ4, OB4, OV4, IQ4OB4, IQ4OV4 Digital I/O 2080-OW4 4-pt 1A Relay Outputs 2080-IF4 4-ch Analog Input, 0-20mA, 0-10V, non-isolated 12-bit Analog I/O 2080-IF2 2-ch Analog Input, 0-20mA, 0-10V, non-isolated 12-bit 2080-OF2 2-ch Analog Output 0-20mA, 0-10V, non-isolated 12-bit 2080-RTD2 2-ch RTD, non-isolated, 0.5C 2080-TC2 2-ch TC, non-isolated, 1C 2080-TRIMPOT6 6-ch Trimpot Analog Input Specialty 2080-MOT-PTO2 Expands base controller PTO capabilities up to 2-Axes with 250KHz Differential Line Driver Expands base controller HSC capabilities up to 2-Axes 2080-MOT-HSC2 with 250KHz Differential Line Driver 2080-MOT-AXIS2 Add 2-Axes of interpolated motion. 4MHz PTO
* See online catalog for complete listing and availability
Controller Support Micro810, Micro830, Micro850 Micro810, Micro830, Micro850 Micro810, Micro830, Micro850 Micro810, Micro830, Micro850 Micro810, Micro830, Micro850 Micro810, Micro830, Micro850 Micro810, Micro830, Micro850 Micro810, Micro830, Micro850 Micro830, Micro850 Micro830, Micro850 Micro830, Micro850

Category

Catalog Number 2080-SERIALISOL
Communications 2080-DNET10
Backup Memory 2080-MEMBAK-RTC
Description RS232/485 isolated serial port DeviceNet Scanner Master/Slave for up to 10 nodes Project, Data Log, Recipe Backup and High Accuracy RTC
Controller Support Micro810, Micro830, Micro850 Micro810 (Slave only), Micro830, Micro850 Micro830, Micro850
Micro800 PLC Family Overview Specifications
Bulletin 2080 12pt Base Unit Power Supply Base Programming Port Embedded 120/240 AC and 12/24 DC options via AC and DC Power Supply Modules Embedded USB 2.0 (non-isolated) Any standard USB printer cable will work Micro810 12pt requires adapter plug None RS-232/485 non-isolated None No Motion Support 12 (8/4) 18 (12/6) 26 (16/10) 1 Axis/2 HSC 10 (6/4) 16 (10/6) 2 Base Unit has embedded 24V DC Power Supply Optional External 120/240V AC, 12V DC/24V AC power supply Embedded USB 2.0 (non-isolated) Any standard USB printer cable will work RS-232/485 non-isolated None Axis/4 HSC 24 (14/10) Axis/6 HSC 48 (28/20) Axis/4 HSC 24 (14/10) Base Unit has embedded 24V DC Power Supply Optional External 120/240V AC, 12V AC/24V AC power supply Embedded USB 2.0 (non-isolated) Any standard USB printer cable will work RS-232/485 non-isolated 10/100Mbps Axis/6 HSC 48 (28/20) Micro810 18pt 26pt 10pt 16pt Micro830 24pt 48pt 24pt Micro850 48pt
Base Serial Port Base EtherNet/IP port Base unit Plug-In Slots Base 100KHz Motion Axis or HSC max I/O Base Digital I/O (In/Out) Base Analog I/O channels Expansion I/O Modules Additional Functions (Plug-In Modules) DeviceNet Master/Slave Isolated RS232/485 2/4-ch Analog RTD/TC Trim Potentiometer Back-up Memory Module Higher speed PTO/HSC High Precision Real-Time Clock Embedded Real-Time Clock LCD Programming Software Program Steps (or instructions) Data (bytes) IEC 61131-3 Languages User Defined Function Blocks Motion Instructions Floating Point Math PID Loop Control Recipe Management/Data Log Run-time download Embedded Serial Port Protocols Environmentals Certifications Temperature Range Dimensions (HxWxD, mm)

Four of 24V DC digital inputs can be configured as 0-10V Analog inputs None Yes Optional 1.5" Local or IP65 3" Remote Connected Components Workbench 2K 4K Yes No 32-bit and 64-bit Yes No No N/A Modbus Master/Slave, ASCII/Binary, DSI 4K 8K Slave only Via Plug-In Via Plug-In Via Plug-In Via Plug-In No No Via Plug-In
Via Plug-In Modules None Master (1 Max) and Slave Via Plug-In Via Plug-In Via Plug-In Via Plug-In Via Plug-In Via Plug-In Via Plug-In No Optional IP65 3" Remote Connected Components Workbench 4K 8K Yes PLCopen Motion Instruction Set Positioning Only (Home, Relative and Absolute Move, etc) 32-bit and 64-bit Yes 32 KB/64KB only if Recipe is not used Yes Modbus Master/Slave, ASCII/Binary, DSI 64 KB/128KB only if Recipe is not used 10K 20K
Via Plug-In Modules or with Expansion I/O modules 4 modules Master (1 Max) and Slave Via Plug-In Via Plug-In Via Plug-In Via Plug-In Via Plug-In Via Plug-In Via Plug-In No Optional IP65 3" Remote Connected Components Workbench 10K 20K Ladder Diagram, Function Block, Structured Text Yes PLCopen Motion Instruction Set Positioning Only (Home, Relative and Absolute Move, etc) 32-bit and 64-bit Yes 64 KB/128KB only if Recipe is not used Yes Modbus Master/Slave, ASCII/Binary, DSI
Ladder Diagram, Function Block, Structured Text
UL/cUL CL1DIV2, CE, Marine, C-Tick 055C 90 x 75 x 60 DC 90x110x60 AC 90x110x90 DC 90x140x60 AC 90x140x90 -2065C (supports outdoor RTU applications) Condensation not allowed 90 x 100 x x 100 x x 145 x x 230 x 80 -2065C (supports outdoor RTU applications) Condensation not allowed 90 x 145 x x 230 x 80
* See online catalog for complete specifications
Connected Components Workbench Software
Connected Components Workbench is a new software platform supporting not only your Micro800 controllers, but Allen-Bradley component-class drives, HMI and motion products in your small machine.
Based on proven Rockwell Automation and Microsoft Visual Studio technology Controller programming, device configurator, and integration with HMI editor
Easy to Acquire and Install

Free IEC 61131-3 standard software download helps minimize time to start machine development

Easy to Update

Free software updates and limited free support minimize time consuming maintenance work

Easy to Configure

Common, easy configuration helps reduce time to commission machine controls

Easy to Program

Choice of programming languages with user defined function block support (ladder diagram, function block diagram, structured text) optimizes how you choose to control your machine

Easy to Test / Deploy

Robust debug features help reduce machine commissioning and maintenance times

Device Configuration

Common environment for: Micro800 controller PowerFlex 4-class drive PanelView Component operator interface Additional connected component products forthcoming Simple to install Simple connectivity to select devices via standard USB communication Graphical controller configuration rather than property dialog(s)

Programming

Extensive use of Microsoft and IEC-61131 standards Value add through Rockwell Automation and user defined function blocks Structured Text, Ladder Diagram and Function Block editors that support symbolic addressing Drag and drop of variables between PLC and HMI programming environments for ease of use Run-time download allows program changes to be made while machine is running

Visualization

PanelView Component software runs within Connected Components Workbench for better user experience Connect directly to PanelView Component through USB cable or over Ethernet to program or transfer files Features include unicode language switching, alarm messages and history, and basic recipe capability
Specifications Controllers Supported Programming languages User Defined Function Blocks Device configuration Run-time download Controller simulation Deployment/Macros Delivery
Connected Components Workbench Software Standard All Micro800 controllers Ladder Diagram, Function Block Diagram, Structured Text Edit and Deploy Supported Not supported Not supported Deploy only Free web download or DVD (9328-SO001A-EN-C) Developer All Micro800 controllers Ladder Diagram, Function Block Diagram, Structured Text Edit and deploy Supported Supported Supported Edit and deploy Orderable Catalog #: 9328-CCWDEVENE
PC Specifications Processor OS Supported HD Disk Space required RAM Optical drives Video requirements

Connected Components Workbench Software Standard 1.6 GHz CPU minimum 2.2 GHZ or higher CPU recommended Windows XP, Windows Vista and Windows 7 2.5 GB 384 MB minimum 1024 MB recommended DVD 1024 x 768 minimum resolution 1280 x 1024 recommended Developer
Visit our website for the most up-to-date product information, downloads and tools: http://www.rockwellautomation.com/go/br-micro800
Rockwell Automation offers a breadth of quality Allen-Bradley components to fit your specific needs. In order to assist you with your component selection, we offer a variety of configuration and selection tools.

Local Distributor

Call 1.800.223.3354 to contact your local Distributor today. http://www.rockwellautomation.com/distributor/
On-Line Product Directory
Our extensive product portfolio is designed to improve your processes through every stage of your manufacturing cycle. http://www.rockwellautomation.com/products/
Product Selection Toolbox
Our powerful range of product selection and system configuration tools assist you in choosing and applying our products. http://www.rockwellautomation.com/en/e-tools/

Catalogs

Within our catalogs you'll find an extensive selection of essential Allen-Bradley component products. http://www.ab.com/catalogs/
Allen-Bradley, Connected Components Workbench, Kinetix, Micro800, PanelView and PowerFlex are trademarks of Rockwell Automation, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies. Cover VFFS image courtesy of Prodo-Pak Corporation
Publication 2080-BR001A-EN-P October 2010
Copyright 2010 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.