Configuring the MD95038 Router (in Windows XP)
Do NOT connect your router to power or PC at this stage. Click Start Click Control Panel Click Network Connections
Double click the Local Area Connection icon
Make sure Show icon in notification area when connected is ticked Click on Internet Protocol (TCP/IP) Click on Properties just below
Make sure both options are set to Obtain automatically Click OK Close the previous window.
Next open Internet Explorer Click Tools Click Internet Options
Click the Connections Tab
Select Never Dial A Connection Click on LAN Settings
Tick the box for Automatically Detect Settings Make sure no other options are ticked Click OK On next screen click Apply and then OK Close Internet Explorer and turn the PC off (Shut Down) Leave the system for 30 seconds and Power back on. When back in Windows: Connect the router to the power supply. Lights will start to come on Connect the router to the PC via the supplied Ethernet cable Do not connect the ADSL cable at this stage You should get a notification that you have connected

Open Internet Explorer

In the address bar of Internet Explorer type 192.168.0.100 Press enter

The following appears

Click on the British Flag (middle option) in bottom left corner of screen
Click on ADSL Connection from the left hand menu
When the Connect box appears
Enter the default username and password User name: admin Password: admin Click OK
Select Great Britain as the country
If your ISP is listed in the Internet Provider drop down box then select it.
If it isnt listed then select Expert Mode from the bottom left
These settings will need to be obtained from your Internet Service Provider (ISP). If you have not obtained these settings from your ISP you MUST obtain them before contacting the Medion helpline. We will be unable to provide help without these settings. You will need: Access Mode Encapsulation Mode Modulation VPI VCI User name Password Tariff type can be set to Flat Rate Shorthold should be set to 0 Click Apply once you have input all these settings correctly Then connect the ADSL cable to the filter and the router
Click on Status from the left hand menu
The ADSL line status should go to Line Ready once it has trained and established the connection this may take several minutes The Active internet connection should go to yes within a few more minutes. If they dont you will need to check the expert settings and re input them, making sure they are all correct (in ADSL Expert Settings). If you still can not connect please contact us: Medion Helpline 0370 (National rate call charge applies)