Installation Manual Double DIN Kit Standard: 381190-28 Rubber-Touch: 391190-28

(sample photo)

Mercedes E-Class (W211)
Compatible with these Pioneer double DIN devices Pioneer Navigation
Mount the metal brackets to the double DIN head unit.
The position of the copper coloured holder can be adjusted to your needs for perfect fit. (see sample) 7. Push the metal frame into the mounting bracket Connect all required circuit points Push the Pioneer Navigation into the metal frame until it snaps in.
4 8. Push the facia plate onto the mounting bracket Reinstall everything in reverse order to finish installation. 2
Double DIN Set contents (1) Metal Frame (2) Installation Kit
12/2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
(3) Mounting Bracket (4) Facia Plate
Installation Manual Double DIN Kit
1. Mercedes E-Class with OEM head unit Facelift models 2007 upwards: After Replacing the OEM head unit it is not possible to use the pocket underneath the radio anymore. 2. Pull up the gear shift cover Unclip the gear shift panel and remove it 4. Remove the control unit / or CDChanger underneath the OEM radio by removing the screws at left and right side
5. Remove the OEM head unit Release the two screws (see arrows) underneath the radio first - then pull out the OEM head unit
3. Open the ash tray and remove the complete ash tray unit
6. Place the mounting bracket on the dashboard Fix the mounting bracket with the two screws (see arrows) at the left and right side under the mounting bracket holder
All installation work must be performed by a qualified professional installer only. The manufacturer / dealer is not liable for any kind of incidential or indirect damages.