WOOD SANDING MACHINES

SMOOTHING THE WAY TO PERFECTION.
Metabo manufacture a wide range of quality sanders for those who require a professional finish. The wide range allows the user to select exactly the right sander for the job, be it for sanding flat surfaces, curved surfaces, sanding into corners or along edges. Backed up with a wide range of accessories Metabo sanders are able to finish a whole host of materials, be it wood, metal, paints, varnish or filler. Metabo. Work. Dont play.
CONSIDERED THE BEST, NOT ONLY ON THE SURFACE. The Metabo range of sanders are considered amongst the best in the industry. Copied by many and perfected by none the Metabo sanding range gives you a choice of machines built to the demands of the professional. Be it for fine finishing, detail finishing, high stock removal or surface preparation Metabo has the sander and accessory to perfect the job in hand time and time again.
Ergonomic design Safe and comfortable work as it fits perfectly in the hand.
Electro-dynamic balancing system Fatigue-free work due to especially low vibrations.
Solid aluminium die cast bearing flange Guarantees a longer service life of the machine.
Four quality ball bearings protected ideally against dust Longer service life due to ideal dust protection.
External dust extraction or extraction by Intec filter system possible (accessory)
Quick clamping system For the fast and comfortable change of the sanding sheet.
Die-cast aluminium oscillating plate More robust material provides longer service life.
Sanding up to the outermost corner Oscillating plate without protruding parts.
Metabo power control system A built-in backing pad brake limits scratches when placing the tool on the material. This means that no manual postprocessing is needed. This makes the disc sander particularly suitable for sanding very thin materials and sensitive surfaces.
Unique Duo oscillating circuit setting Two adjustment options provide 100% finer surfaces with the small oscillating circuit diameter and 70% more material removal with the large one.
DSE 300 Intec the first triangular base-plate sander with integrated dust extraction unit No obstructive suction hose; the dust is collected in the integrated dust container.

ANGLE GRINDERS

Which sanding machine for which application?
Application Type and output Page METAL PROCESORS ROUTERS AND PLANERS WOOD SANDING MACHINES SCREWDRIVERS DRILLS IMPACT DRILLS HAMMERS
Delta sander with comfortable one-hand operation and dust extraction unit. Low weight with good material removal. Suitable for sanding at places difficult to reach such as corners, edges, intermediate spaces. Disc sander with comfortable one-hand operation and dust extraction unit. Grinding at places difficult to reach such as corners, profiles, edges, intermediate spaces. Suitable for grinding heat-sensitive materials and surfaces. Removal of carpet or tile adhesive (with scraper, accessory). Particularly suitable for sanding inner and outer curves. Small backing pad diameter and low housing shape for sanding at places difficult to reach. Suitable for sanding heat-sensitive materials and surfaces. Disc sander with comfortable one-hand operation and dust extraction unit. Low weight with good material removal. Suitable for sanding wood, plastic and metal on even and slightly curved surfaces. Large material removal and finest sanding on even and curved surfaces. Suitable for sanding wood, plastic and metal on even and slightly curved surfaces. Intec dust extraction unit. Substantial material removal and finest grinding finish on even and domed surfaces. Suitable for sanding heat-sensitive materials and surfaces. Grinding of very thin materials (e.g. veneers). Universal applications due to Duo-oscillating circuit setting. Large material removal and finest grinding on even and curved surfaces. Suitable for sanding heat-sensitive materials and surfaces. Grinding of very thin materials (e.g. veneers). Sander with comfortable one-hand operation and dust extraction unit. Low weight with good material removal. Suitable for sanding wood, plastic and metal on even and slightly curved surfaces. Robust sander, designed for commercial use. Sanding of wood, plastic, metal, stone on even or slightly curved surfaces. With integrated dust extraction unit for dust-free work without suction hose. Sanding of wood, plastic, metal, stone on even or slightly curved surfaces. Excellent weight-output ratio for hard and long hours of working, as well as working overhead. Fine sanding results when sanding wood, plastic, metal and stone. Sanding on even or slightly curved surfaces. Clean work with integrated sanding dust extraction. Like SR 356, however with large sanding disc for quicker material removal. NEW

FMS 200 Intec 200 W

DSE 300 Intec 300 W

SX E W

FSX 200 Intec 200 W

SXE 325 Intec 250 W

SXE 425 TurboTec 320 W

SXE 450 TurboTec 350 W

FSR 200 Intec 200 W

SR 10-23 Intec 200 W

SR 20-W

Sr W Sr E W

Fine sanding results when sanding wood, plastic, metal and stone. Sanding on even or slightly curved surfaces. Suitable for sanding heat-sensitive materials and surfaces. Clean work with integrated sanding dust extraction. Like SR E 357, however with large sanding disc for quicker material removal.

Sr E W Ba E 1075 1.000 W

For sanding large, even areas. For sanding notches and for working close to edges. Suitable for sanding heat-sensitive materials and surfaces. Can also be used as fixed tool.
TRIANGULAR BASE-PLATE SANDERS
EQUIPMENT FEATURES Triangular base plate for sanding edges, corners and surfaces Light and handy machine for convenient one-hand operation Very good weight-performance ratio Vibration-damping, non-slip rubber coated handle Dust-proof ball bearing Velcro-faced base plate Dust extraction unit with Intec filter system, with washable filter cartridge EQUIPMENT FEATURES Universal use for sanding wood, plastics, metals and stone Also suitable for louvre sanding and for sanding varnished surfaces Robust gear design for severe applications Spindle with dustproof triple ball bearing design Base plate holder and base body in sturdy aluminum High stock removal Variospeed (V) electronics Thumbwheel for preselection of orbital frequency PU-foamed base plate enables flexible adjustment to the workpiece surface Velcro-faced base-plate High extraction output Dust extraction unit Ideal handling by slim handle and handy recessed grips Low housing Rotatable base plate without tools (360) External dust extraction outlet

FMS 200 Intec

DSE 300 Intec
200 Watt Multisander FMS 200 Intec
300 Watt Electronic Triangular Base-Plate Sander DSE 300 Intec Comparative device characteristics Base plate size (corner to corner) Orbital frequency at no-load Orbital frequency at rated load Rated input power Oscillating circuit Weight (without mains cable) Standard equipment
Comparative device characteristics Base plate Orbital frequency at no-load Rated input power Output power Orbital frequency at rated load Oscillating circuit Weight (without mains cable) Standard equipment
100 x 147 mm 26.000 /min 200 W 80 W 22.000 /min 1,4 mm 1,25 kg 3 cling-fit sanding sheets (perforated), dust collector cartridge, 1 pleated filter, carry case
93 mm 14.000 - 22.000 /min 18.000 /min 300 W 1,8 mm 1,3 kg 3 perforated sanding sheets (P 60, P 100, P 240), carry case

Type Order no.

FMS 200 Intec 6.00065

DSE 300 Intec 6.00311

ACCESSORIES

FOR THE FMS 200 INTEC

Velcro-faced base-plates Order no. Sanding plate, perforated Sanding plate for FSR 200 Intec (as spare) Dimensions: 147 x 100 mm 6.6.31663 METAL PROCESORS ROUTERS AND PLANERS WOOD SANDING MACHINES SCREWDRIVERS DRILLS 6.24996 6.31593 Order no. Carry case Cling-fit cleaning nylon web 6.24957 6.25447 IMPACT DRILLS HAMMERS ANGLE GRINDERS Scraper blade For easy removal of old paint, glue, and other residues Blade width mm 30 Order no. 6.31662

6.31664

50 Dust collection box Order no. Dust collector cartridge Dust collector cartridge including dust filter 6.25602 6.25601

Carbide-tipped

6.31661
Order no. Spatula Made of spring sheet-steel Blade width: 60 mm 6.31659
Pleated filter Pleated filter, polyester, for dust collector cartridge (6.25601) Connector Connector 35 mm for connecting to a normal vacuum cleaner

6.25602

Dust extraction accessories Order no.

6.26996

FOR FOR DSE 300 INTEC
Velcro-faced base-plates Order no. Perforated velcro-faced base-plate For the triangular base-plate sanders DSE 300 and DSE 300 Intec (as spare) Dimension from corner to corner: 90 mm special louvre base-plate Velcro-faced at the bottom side. The self-adhesive velcro-faced liner supplied can be fitted to the top of this base-plate so that cling-fit sanding sheets can be fitted for top and bottom sanding of louvres. Self-adhesive liner Self-adhesive velcro-faced liner (as spare for special louvre base-plate 6.24971) Cling-fit abrasive nylon web, corundum abrasive Grit: P 100 Grit: P 280 6.24992
Dust collector cartridge For dust extraction unit with DSE 300 Intec 10 dust filters For the dust collector cartridge 6.24993 of the DSE 300 Intec Extraction nozzle For external extraction for DSE 300/ DSE 300 Intec Suction hose Connector with internal 30 mm and connector with outer 35 mm Hose length: 5 m Suction hose : 19 mm Adapter For connecting the suction hose with connector 35 mm to an extraction nozzle 30 mm Connector For connecting suction hose 6.31592 ( 30/35 mm connection) to a household vacuum cleaner

6.24993

6.24995

6.24994

6.31592

6.24971

6.24972
Other accessories 6.24958 6.24959
Cling-fit polishing felt Hard

6.24949

DISC SANDERS
EQUIPMENT FEATURES Very suitable for sanding inner and outer curves Light and handy machine for convenient one-hand operation Rotating and additional oscillating movement of backing pad for optimum finish Variospeed (V) electronics Thumbwheel for preselection of speed Limit scratches while placing the running machine on the material (Power Control System) Clean sanding result in narrow rails Excellent result even for polishing smaller surfaces Low housing Especially quiet through electro dynamic fine balancing Optimum power transmission through reduced crown wheel gear Long service life through spindle with dustproof triple ball bearing design Velcro-faced backing pad External dust extraction outlet EQUIPMENT FEATURES Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Light and handy machine for convenient one-hand operation Very good weight-performance ratio Dust-proof ball bearing Velcro-faced backing pad Vibration-damping, non-slip rubber coated handle Dust extraction unit with Intec filter system, with washable filter cartridge

SX E 400

FSX 200 Intec
220 Watt Electronic Disc Sander SX E 400 Comparative device characteristics Diameter of backing pad No load speed Rated input power Output power Rated load speed Oscillating circuit Weight (without mains cable) Standard equipment Comparative device characteristics Diameter of backing pad No load speed Rated input power Output power Rated load speed Oscillating circuit Weight (without mains cable) Standard equipment
240 Watt Palm Grip Random Orbital Sander FSX 200 Intec
80 mm 5.000 - 10.000 /min 220 W 100 W 6.000 /min 3 mm 1,2 kg 5 perforated cling-fit sanding sheets, cling-fit intermediate disc, allen key
125 mm 11.000 /min 240 W 90 W 9.500 /min 2,7 mm 1,3 kg 3 perforated cling-fit sanding sheets, dust collector cartridge, 1 pleated filter, carry case

SX E 400 6.00405

FSX 200 Intec 6.09225
EQUIPMENT FEATURES Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Variospeed (V) electronics Thumbwheel for preselection of speed Limit scratches while placing the running machine on the material (Power Control System) Dust-proof ball bearing Velcro-faced backing pad Dust extraction unit with Intec filter system, with washable filter cartridge EQUIPMENT FEATURES TurboBoost switch: allows additional power reserves to be employed for achieving maximum removal Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Rotating and additional oscillating movement of backing pad for optimum finish Variospeed (V) electronics Thumbwheel for preselection of speed Limit scratches while placing the running machine on the material (Power Control System) Removable front handle Dust-proof ball bearing Sturdy aluminum die cast bearing housing Velcro-faced backing pad Vibration damping, non-slip rubber support on the machine housing and the handle Dust extraction unit with Intec filter system, with washable filter cartridge External dust extraction outlet ANGLE GRINDERS

Medium-hard Soft Medium-hard
Backing pad, for self-adhesive sanding discs Diameter mm 150 Hardness Medium
Velcro-faced intermediate disc
Additional accessories for SXE 450 TurboTec
SXE 450 TurboTec NEW 350 Watt Electronic Disc Sander SXE 450 TurboTec Comparative device characteristics Diameter of backing pad No load speed Rated input power Output power Rated load speed Oscillating circuit Weight (without mains cable) Standard equipment
150 mm 13100 /min 350 W 180 W 8.500 /min 2,8/6,2 mm 2,2 kg Velcro-faced backing pad, 3 perforated cling-fit sanding sheets, allen key, removable side handle, dust collector cartridge, 1 pleated filter
Cling-fit abrasive nylon web Diameter: 150 mm Grit: P 100 Diameter: 150 mm Grit: P 280
Metabox III For SX E 425 Turbo Tec, SX E 450 Turbo Tec For SX E 450 Duo, SX E 425 XL Type Order no. SXE 450 TurboTec 6.00129
Accessories for the dust intake action are to be found on page 158.

Diameter mm

SANDERS
EQUIPMENT FEATURES Universal use for sanding wood, plastics, metals, stone and varnished surfaces Light and handy machine for convenient one-hand operation Very good weight-performance ratio Vibration-damping, non-slip rubber coated handle Dust-proof ball bearing Velcro-faced base plate and clamp fixture Dust extraction unit with Intec filter system, with washable filter cartridge COMMON FEATURES Universal use for sanding wood, plastics, metals, stone and varnished surfaces Robust sander with long service life even under tough conditions Very good weight-performance ratio High material removal Even sanding pattern with high class base plate made of microcellular polyurethane elastomere Especially vibration-free by electrodynamic fine balancing 4 high quality oscillating buffers and dust-proof quality ball bearing for long service life with continuous use Sturdy aluminum die cast oscillating plate Unique clamping system enables quick and comfortable change of sanding sheet Sanding possible up to the outermost corner External dust extraction outlet Auto-stop carbon brushes

FSR 200 Intec

SR 10-23 Intec

SR 20-23

200 Watt Palm Grip Sander FSR 200 Intec Comparative device characteristics Base plate Orbital frequency at no-load Rated input power Output power Orbital frequency at rated load Oscillating circuit Weight (without mains cable) Standard equipment Special advantages Designed for continuous commercial use Solid aluminium die cast bearing flange Dust extraction unit with Intec filter system, multiple cleaning Dust extraction unit with Intec filter system, can be retrofitted as accessory Comparative device characteristics Base plate Orbital frequency at no-load Rated input power Output power Orbital frequency at rated load Oscillating circuit Weight (without mains cable) Standard equipment

For the palm grip sander FSR 200 Intec Order no. Perforated, velcro-faced sanding plate FSR 200 Intec (as spare) Length: 114 mm Width: 112 mm 6.25657 For the sanders SR 10-23, SR 10-23 Intec and SR 20-23 Order no. Dust collector cartridge Can be cleaned several times with pleated filter 6.31980 Included in delivery with SR 10-23 Intec Pleated filter Polyester (as spare), for the dust collection box (6.31981) 6.31981
For the Sr 356 and Sr E 357 sanders For the sanders Sr 356, Sr E 357, Sr 358 and Sr E 359 Order no. The base-plate of sanders Sr 356/Sr E 357 can be replaced by the velcro-faced base-plate Length: 185 mm Width: 92 mm 6.24736 Dust bag holder, complete As spare, with 1 dust bag Order no. 6.31289
Dust bag Without dust bag holder 6.31289, as space, pack of 5 For the Sr 358 and Sr E 359 sanders Order no. The base-plate of sanders Sr 358/Sr E 359 can be replaced by the velcro-faced base-plate Length: 230 mm Width: 112 mm 6.24749 Dust bag Can be used in the dust bag holder (6.31289) instead of the paper dust bag provided (6.31288) Paper dust bag, complete Sawdust bag (paper) with connector (as spare) Dust bag Without dust bag holder 6.31385, as space, pack of 5 Order no. The perforated liner is stuck onto the sanding plate of sanders. The sanding plate should be free of dust and grease before applying the adhesive liner. Length: 191 mm Width: 93 mm 6.24709

6.31385

6.31286
Self-adhesive velcro-faced liner for the Sr 356 and Sr E 357 sanders
Hoses Order no. Suction hose With connector 58 mm for bayonet fitting and rubber connector (internal 30 mm, outside 35 mm) Hose length: 3,5 m 6.31938
DUST EXTRACTION ACCESSORIES
For the palm grip sander FSR 200 Intec Carry cases Order no. Dust collector cartridge Dust collector cartridge including dust filter 6.25602 6.25601
Order no. Sheet steel carry case For Sr 226, Sr E 227, Sr 356, Sr E 357, Sr 358, Sr E 359 6.31396
6.25602 Carry case For SR 10-23, SR 10-23 Intec, SR 20-23 6.26996 6.25448

BELT SANDERS

Accessories EQUIPMENT FEATURES Powerful and loadable motor with high reserve capacity Fast and easy sanding belt change Very good polished section by extremely precise belt path Excellent sanding results and comfortable operation by favourable centre of gravity position of the motor Metabo S-automatic torque limiting clutch Variospeed (V) electronics Thumbwheel for preselection of belt speed Auto-stop carbon brushes Side handle for ideal machine guidance Dust extraction unit External dust extraction outlet Suitable for stationary use Order no. Sanding frame For accurate sanding of flat surfaces with the belt sander Ba E 1075 6.31033 ANGLE GRINDERS ROUTERS AND PLANERS Type Order no. Ba E 1075 6.01075 WOOD SANDING MACHINES SCREWDRIVERS DRILLS IMPACT DRILLS Ba E Watt Electronic Belt Sander Ba E 1075 Comparative device characteristics Torque Sanding/grinding width Sanding belt supporting surface No-load belt speed Rated input power Rated load belt speed Weight (without mains cable) Standard equipment 7 Nm 75 mm 75 x 125 mm 200 - 380 m/min 1.000 W 320 m/min 3,8 kg Dust bag, 1 sanding belt P 100, side handle, suction adapter, base for fixed use HAMMERS METAL PROCESORS

Length guide For stationary use of the sander, can be tilted up to 45 for sanding bevels

6.31032

Bases for sanding belt Made from graphite-coated fabric Packing unit: 2 Base for sanding belt Comprising: spring sheetsteel with cork lining for rough grinding work with rapid material removal Packing unit: 1

6.31034

6.31037

SANDING MEDIUM

SOUND ARGUMENTS. A quality machine also needs a quality accessory. For sanders a wide range of accessories are required to give the best finish for a wide range of materials. Be it for wood, metal, stone, paint, varnish or filler Metabo has the right accessory for the machine and the material. At Metabo we do not just make accessories for our own machines but for other manufactures as well.
Structure and purpose of Metabo abrasive mediums
The sanding compound carries the grains and transfers the chip removal forces. Besides high strength and small expansion, the sanding compound has to render a sanding process matching flexibility. Carriers are Highly compressed papers of various thicknesses. Fabric based on polyester and cotton wool of various strengths. Vulcanized fibre as a strong and tear-proof base is the base material for the (Vulcan) fibre disc. The abrasive grain is the actual sanding tool. It penetrates the material to be worked on and removes the surface. The abrasive grain is anchored on the grainholding medium. High hardness, toughness and a sharp edged geometry are the most important attributes of the abrasive grain. For top quality sanding medium only synthetic abrasive grain materials are used. Abrasive grain types are Corundum (Aluminiumoxide) as a hard, slightly brittle grain for the processing of metal, wood, lacquers. of rough- and fine ground finishes. Silicon carbide as a hard, sharp-edged abrasive grain for processing of lacquer, wood, ceramic, glass, rubber. for rough and fine ground finish. Aluminous zircon as a tough and fine crystalline combination of Aluminiumoxide and aluminous zircon for the processing of metal and non-rusting materials. The bonding agent anchors the abrasive grain in the sanding compound carrier and supports it against the forces generated by the removal of the surface material. Bonding agents are Phenolic resins and partially synthetic resins for sufficient support with a certain elasticity.

Covering Abrasive grain bonding (Corundum, material silicone (Phenolic resin) carbide)

More grindactive Coat

Basic bond (Phenolic resin)
Sanding compound carrier: Paper, fabric, fibre or a P-G-combination
The quality of Metabo sanding mediums
for example for orbital sander: Wood + metal / wood + metal "professional" E-paper, pink aluminium oxide, resin bonded High quality grinding paper with dense dispersion and high material removal rate For the best results when sanding wood and metal in professional application Application: For veneers, solid wood, steel- and special steel sheeting, NE-special steels, light metals. e.g. for sanding veneered and foil covered furniture parts with hot-melt glue edging, decor sanding on special steel sheeting, refurbishment sanding and deburring of sheet edges
Special / special expert C-paper/ latex, silicone carbide, synthetic resin bonded, waterproof High quality sanding paper with dense grain distribution For best results in a professional as well as in a domestic environment. Ideal for wet-sanding of primed surfaces in body-workshops and on motorcar repairs Application: Especially for extremely hard surfaces, filler coat, filler, lacquers of all types e.g. when wet-sanding of primed surfaces and roughing up of all lacquered surfaces
for triangular base-plate sanders: Paint / paint professional B-/C-Paper, pink grade corundum, stearate-coated, resin bonded High quality sanding paper with medium-dense grain dispersion and a high material removal rate The special stearate coating ensures a long service life by not clogging the sanding medium For best results when sanding off paint, lacquer, body-filler on wood or metal on professional application Application: To deburr and clean veneer, solid wood, ply-wood and lacquered surfaces, deburring of veneered furniture edges
for example for disc sander: Wood / wood classic A-/B-Paper, normal corundum, resin-/glue bond High quality sanding paper with half-open grain distribution Best suited for sanding of wood with an outstanding price-performance ratio. Application: For wood generally, solid wood, veneers, plastic, acrylic glass, lacquer, spatula, fillers, e.g. for deburring, cleaning of plywood, veneer-, solid wood, lacquered surfaces, deburring of veneered furniture edges
Which sanding medium for which machine and for which manufacturer?

SANDING SHEETS FOR TRIANGULAR BASE-PLATE SANDERS 93 mm, 6 holes, velcro Metabo DSE 130 DSE 170 DSE 300 / Intec Bosch GDA 280 E PDA 100 PDA 120E PDE 180 / E PDA 240E PSM 160 Casals BLD 180 VLD 230 Makita BO mm, 6 holes, velcro Festo DX 93E/E Plus 125 mm, 8 holes, velcro Bosch GEX 125A / AC PEX 12A / AE PEX 125A - 1 PEX 125 AE PEX 400AE De Walt DW 423 Elu Fein Festo Kress ES 55E MSF 636-1 ES 125 / E CPS 6125-1 / E HEX 6385E HEX 1385E Skil Wegoma LRE 84H 100 x 150 mm, 7 holes, velcro Festo DS 400/E/EQ 150 mm, 6 holes, velcro Metabo SXE 425 XL SXE 450 DUO Bosch GEX 150AC/ACE PEX 15AE 100 x 150 mm, 11 holes, velcro Metabo FMS 200 Intec Bosch PSM 160 A PSM 80 A PRIO 105 mm, 6 holes, velcro AEG DSE 220 DSE mm, 6 holes, velcro Kress CDS 280 DSXL CDS 6425 EXL 150 mm, 8 holes, velcro SANDING SHEETS FOR DISC SANDERS 115 mm, 8 holes, velcro Bosch PEX11A/AE PEX 115 Einhell EX 115 Kress Skil CPS 6115-1/E 7415 Peugeot PAE 115 Stayer LRT 115 Metabo FSX 200 Intec SXE 125 SXE 425 AEG EX 400 EX 450 EXE 400 Atlas Copco TXE mm, 16 holes, velcro AEG EX 450 EXE 450 Atlas Copco TXE 150 Fein MSF 649-2A /-2B Holz Her mm, 9 holes, velcro Festo ET 2E RO 150E ES 150/3 EQ/C ES 150/5 EQ/C ProTool ESP 150 E AEG Fein EXE 450 MSF 636-1 MSF 649-2A/-2B Makita BO 6030 BO 6040 Skil Casals VEX 150 E Hilti PEX 420 AE DeWalt DW 443 Elu ES 56E/EK TP 522 AS WFE 380 WFE 450E Hitachi SAY 150A Kress 900 HEX Milwaukee ROS 150 E Peugeot PRX 150E Stayer LRT 150 RO 150 Wegoma RX 91 C Casals Festo Hitachi Makita Bosch Felisatti TP 521AS/EAS 93 x 185 mm, 8 holes, velcro Metabo SR 356 SR 357 SR4350 Atlas Copco VS 230/E VSS 22/E VSS 260/E GSS 23 AE GSS 230 A/AE PSS / A/AE PSS 180A PSS 240A/AE KLR 210 RS 3 SFE/E FS 10 SB 9036 TV 4102 7300/S Black&Decker KA 175 KA 186/E Einhell EST x 133 mm, 8 holes, velcro Atlas Copco Bosch Festo VS 11 Black&Decker P 63-01 GSS 16 A RS 4 / E / STF Felisatti TP 31 E Hitachi SV 8 SA 80 x 166 mm, 8 holes, tightened Atlas Copco VS 11 Black&Decker P 63-01 Bosch GSS 16A Hitachi SV 8 SA Wegoma LRE 84H 93 x 178 mm, 8 holes, velcro SANDING SHEETS FOR SANDERS

Hitachi TSV 13Y

LRS 93G LRS 93M RS 3/E RS 4/E/STF

Peugeot PV 240 A

93 x 230 mm, 8 holes, tightened Metabo SR 10-23 SR 10-23 Intec SR 20-23 SR 226 SR 356 SR 4350 SRE 227 SRE 357 Atlas Copco VS 230 VSE 230 VSS 260 VSSE 260 Black&Decker BD 175 BD 180 E CD 400 DN 41 AE DN 180E KA 196 Bosch GSS 23/AE GSS 230A/AE PSS 23/A/AE PSS 230 PSS 240A/AE Festo RS 3 SFE RS 3E SFE Makita Peugeot PV 240 A TV 4102 Ryobi NS 401 NS 801 S 35 Skil S x 230 mm, 8 holes, tightened AEG VS 230 VSS 260/E Black&Decker KA 185 KA 185E 93 x 280 mm, 8 holes, tightened Velcro for extended grinding disc Bosch GSS 23AE GSS 230 A/AE

6.24060

6.26106
Cling-fit sanding sheets for paints and lacquers, "professional" series Diameter mm Grit
Cling-fit sanding sheets 80 mm, 6 holes 80 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 320 P 400
Diameter mm Grit Packing unit Order no.
SANDING SHEETS FOR SANDERS / ORBITAL SANDERS
Sanding sheets wood and metal, "professional" series Dimensions mm Grit Packing unit Order no.
Cling-fit sanding sheets 115 mm, 8 holes 115 P 115 P 115 P 115 P 115 P 115 P 115 P 115 P 115 P Cling-fit sanding sheets 125 mm, 8 holes 125 P 125 P 125 P 125 P 125 P 125 P 125 P 125 P 125 P Cling-fit sanding sheets 150 mm, 6 holes 150 P 150 P 150 P 150 P 150 P 150 P 150 P 150 P 150 P Cling-fit sanding sheets 150 mm, 9 holes 150 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 320 P 6.26107 6.26108 6.26109 6.26110 6.26111 6.26112 6.26113 6.26114 6.26115
Cling-fit sanding sheets 80 x 133 mm, 8 holes, with velcro 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P Cling-fit sanding sheets 93 x 185 mm, 8 holes, with velcro 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P Sanding sheets 93 x 230 mm, 8 holes, for clamping 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P Cling-fit sanding sheets 103 x 115 mm, 6 holes, with velcro 103 x x x x x x x x x 115 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 320 P 6.25749 6.25750 6.25751 6.25752 6.25753 6.25754 6.25755 6.25756 6.25757 6.26052 6.26053 6.26054 6.26055 6.26056 6.26057 6.26058 6.26059 6.26060
6.25726 6.25727 6.25728 6.25729 6.25730 6.25731 6.25732 6.25733 6.25734
6.24028 6.24029 6.24030 6.24031 6.24032 6.24033 6.24034 6.24035 6.24036
6.25738 6.25739 6.25740 6.25741 6.25742 6.25743 6.25744 6.25745 6.25746 Order no.

6.24808 6.24809 6.24810 6.24811 6.24812 6.24813 6.24814 6.25808
6.24491 6.24492 6.24493 6.24494 6.24495 6.24496 6.24497 Order no.
6.24826 6.24827 6.24828 6.24829 6.24830 6.24831 6.24832 6.25807
10 cling-fit sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 80 x 133 mm Version: Perforated (8 holes) 10 cling-fit sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 93 x 185 mm Version: Perforated (8 holes) 10 sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 93 x 230 mm Version: Perforated (8 holes) 10 sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 103 x 115 mm Version: Perforated (6 holes) 10 sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 115 x 140 mm Version: Perforated (6 holes) 10 cling-fit sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 115 x 230 mm Version: Perforated (14 holes) 10 sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 115 x 280 mm Version: Perforated (14 holes)

6.25758

6.25774
6.24710 6.24711 6.24712 6.24713 6.24714 6.24715

6.24490

6.25628

6.25638

6.24700 6.24701 6.24702 6.24703 6.24704 6.24705

6.25765

6.24499
Dimensions mm Grit Packing unit Order no. Sanding sheets for paints and lacquers, "professional" series Dimensions mm Grit Packing unit Order no.
Cling-fit sanding sheets 115 x 230 mm, 14 holes, with velcro 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P Sanding sheets 115 x 280 mm, non-perforated, for clamping 115 x x x x x x x x 280 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 10 6.25832 6.25833 6.25834 6.25835 6.25836 6.25837 6.25838 6.25839 6.25841 6.25842 6.25843 6.25844 6.25845 6.25846 6.25847 6.25848
Cling-fit sanding sheets 80 x 133 mm, 8 holes, with velcro 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P Cling-fit sanding sheets 93 x 185 mm, 8 holes, with velcro 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P Sanding sheets 93 x 230 mm, 8 holes, for clamping 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P Cling-fit sanding sheets 103 x 115 mm, 6 holes, with velcro 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P Sanding sheets 115 x 140 mm, 6 holes, for clamping 115 x x x x x x x x 140 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 10 6.25851 6.25852 6.25853 6.25854 6.25855 6.25856 6.25857 6.25858

100 x 560 mm AEG BBS 1100 BBSE 1100 HBS 100 / E Atlas Copco BBS 100/E De Walt DW 650 DW 650 E Elu Festo Ryobi MHB 90/E/K BU 25 B 422 BE 422 K 5 HB 422/E
SANDING BELTS FOR BELT SANDERS
Sanding belts for wood and metal, "professional" series Dimensions mm Grit Packing unit Order no. ANGLE GRINDERS ROUTERS AND PLANERS WOOD SANDING MACHINES SCREWDRIVERS DRILLS IMPACT DRILLS HAMMERS METAL PROCESORS Dimensions mm Grit Packing unit Order no.
Sanding belts 100 x 560 mm 100 x 560 P x 560 P x 560 P x 560 P x 560 P x 560 P x 560 P x 560 P 240 Sanding belts 100 x 610 mm 100 x 610 P x 610 P x 610 P x 610 P x 610 P x 610 P x 610 P x 610 P 240 Sanding belts 100 x 620 mm 100 x x x x x x x x x x x x x x x x 620 P 40 P 60 P 80 P 100 P 120 P 150 P 180 P 240 P 40 P 60 P 80 P 100 P 120 P 150 P 180 P 10 6.25962 6.25963 6.25964 6.25965 6.25966 6.25967 6.25968 6.25969 6.25973 6.25974 6.25975 6.25976 6.25977 6.25978 6.25979 6.25980 6.25984 6.25985 6.25986 6.25987 6.25988 6.25989 6.25990 6.25991 6.25993 6.25994 6.25995 6.25996 6.25997 6.25998 6.25999 6.26000 Order no. 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 65 x 410 mm 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 75 x 457 mm 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 75 x 480 mm 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 75 x 533 mm 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 75 x 575 mm 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 75 x 610 mm 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 100 x 560 mm 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 100 x 610 mm 3 sanding belts Assortment ( 1 each of P60, P80, P100) Dimensions: 100 x 620 mm 6.25903
Sanding belts 65 x 410 mm 65 x 410 P x 410 P x 410 P x 410 P x 410 P x 410 P x 410 P x 410 P 240 Sanding belts 75 x 457 mm 75 x 457 P x 457 P x 457 P x 457 P x 457 P x 457 P x 457 P x 457 P 240 Sanding belts 75 x 480 mm 75 x 480 P x 480 P x 480 P x 480 P x 480 P x 480 P x 480 P x 480 P 240 Sanding belts 75 x 533 mm 75 x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P x 533 P 320 Sanding belts 75 x 575 mm 75 x 575 P x 575 P x 575 P x 575 P x 575 P x 575 P x 575 P x 575 P 240 Sanding belts 75 x 610 mm 75 x x x x x x x x 610 P 40 P 60 P 80 P 100 P 120 P 150 P 180 P 3 6.31410 6.31411 6.31412 6.31413 6.25901 6.31414 6.25902 6.31415 6.25905 6.25906 6.25907 6.25908 6.25909 6.25910 6.25911 6.25912 6.25916 6.25917 6.25918 6.25919 6.25920 6.25921 6.25922 6.25923 6.31001 6.31002 6.31003 6.31004 6.31005 6.25927 6.31006 6.31007 6.31008 6.25929 6.25930 6.25931 6.25932 6.25933 6.25934 6.25935 6.25936 6.25937 6.25940 6.25941 6.25942 6.25943 6.25944 6.25945 6.25946 6.25947 6.25951 6.25952 6.25953 6.25954 6.25955 6.25956 6.25957 6.25958

6.25913

6.25924

6.25928