Fast search
Please enter a search term!

RSS-Service

If you already have an RSS feed reader available, you can also find our latest news here as an RSS-Feed.

Latest messages

Metabo opens the garden season with a world premiere: ?PowerCutter Li? ? an all-rounder in the green outdoors For perfect pruning and cutting ?PowerCutter Li?: One for all / World premiere for the ?rotating blade? / Significantly more power thanks to rotating movement / For hedges, box trees, lavender & co. / 7.2-Volt tool even cuts through plants up to 8 mm thick / Lithium-ion power pack with two capaci. [more] 18.03.09
A generation change in the 7 kg class:New SDS-max ?KHE 76? combi-hammer with Metabo VibraTech system (MVT) Feared by concrete, appreciated by joints New combi-hammer in the 7 kg class / Easy to handle, powerful output / With Metabo VibraTech system (MVT) / New: spring-loaded ?active? mass-balance weights / Tried and tested: vibration attenuation in the main and extra handles / Overall impact and vibra.

12.03.09

[more]
"120 Volt AC/DC" power tools: Metabo's powerful new direct current machines Safe working, even under extreme conditions For 120 volts DC: Metabo's new "AC/DC" line of tools / Complete user safety: three angle grinders, an upright grinder as well as a drill and a jigsaw / Reliable power supplies from capable partners / Successful trial run at the Meyer Werft shipyard in P. [more] 18.04.08
"CS 23-355": New Powerful Metal Cutting Chop Saw from Metabo Quick disassembly New Metal Chop Saw from Metabo / Lightweight transport, powerful performance / "CS 23-355" Cuts precisely with 2,300 Watts / Angle cut and undercut capable / Ergonomic "D-handle" provides comfortable operation / Bottom-side access protection meets future standards requirements /. [more] 07.03.08
New angle grinder generation by Metabo: high-quality grinding, cutting, de-rusting and polishing Excellent performance and far more power Generation change: Metabo is replacing its compact class angle grinder range with 12 new models: ergonomic design and even more power / safety switch protects user / innovative air flow concept and sophisticated dust protection technology / unique feature. [more] 15.10.07

1 | Orbital Pipe Saws | www.lefonmachine.com

lefonmachine.com

Pipe Beveling Machine
2 | Orbital Pipe Saws | www.lefonmachine.com
The LEFON ET/EV Beveling Machine is a portable beveling machine for quick and accurate weld preparation on pipe and tube. A variety of models can meet the requirement to bevel from ID to 23 ID pipe. Please check the specifications section for model selection. Depending on the model, the beveling machine can bevel pipe or tube with wall thicknesses from 15mm (9/16) to 70mm( 2 ). The machines are all ID mounted by a three Clamp Extension Leg mandrel design for square, rigid installation. Different sized clamp legs are used to cover the machines entire range of pipe diameters. The ET/EV series are driven by a reliable and powerful electric motor, such as the world renowned motor supplier, METABO. KEY FEATURES: 1. Quick Setup Takes less than 5 minutes to setup Adjust the Feed Handle to quickly clamp the beveler inside pipe/tube Accurately centered inside pipe Takes seconds to install and adjust bevel Bit 2. Easy to use Switch on and off by motor switch Fine tune using the Scale Wheel to micro feed the bevel Compact design allows it to work in small spaces 3. Unique Design Ball Bearing and self lubrication design to dramatically extend beveler life High strength shaft, and large Clamp Extension Leg contact area to maximize rigidity of the machine Special surface treatment to resist wear and erosion Exceptional heat treatment for disk and gear allow it to work on any material
Figure 1-1 and Figure1-2 illustrate the main components of the ET, which can bevel up to 20mm wall thickness pipe.

Figure 1-1

Figure 1-2
3 | Orbital Pipe Saws | www.lefonmachine.com
Figure 2-1 and Figure2-2 illustrate the main components of the EV, which can bevel up to 70mm wall thickness pipe
Figure 2-1 SPECIFICATIONS
Pipe ID Model (inch) ET1 ET3 ET6 ET10 EV10 ET14 EV14 ET24 EV24 3/4-1/8-1/2-6 1/1/8-9 1/1/8-9 1/7/8-7/8-3/4-23 5/3/4-23 5/8 (mm) 18-25 28-76 65-159 80-240 80-240 150-330 150-330 300-600 300-600 (inch) 7/8-1 1/1/4-3 1/7/8-7 1/1/2-10 3/1/2-10 3/3/8-13 7/3/8-13 7/5/8-24 3/5/8-24 3/4 (mm) 21-28 32-80 72-182 90-272 90-272 162-352 162-352 320-630 320-630 Pipe ID Pipe OD Pipe OD Max Wall Thickness(mm) 70

Figure 2-2

Drive Motor

Input Power

Weight (kg)
Metabo,110/220v Metabo,110/220v Metabo,110/220v Metabo,110/220v Metabo,110/220v Metabo,110/220v Metabo,110/220v Metabo,110/220v Metabo,110/220v
1020w 1020w 1020w 2300w 2300w 2300w 2300w 2300w 2300w
CLAMP EXTENSION LEG CHART
Extension Leg No extension leg Ext1 Ext2 Ext3 Ext4 Ext5 Ext6 Ext7 Ext8 Ext9 18mm ID 19mm ID 20mm ID 21.5mm ID 23mm ID 24.5mm ID 26mm ID 27mm ID ET1 ET3 28-36mm ID 36-44mm ID 44-52mm ID 52-60mm ID 60-68mm ID 68-76mm ID ET6 65-87mm ID 87-105mm ID 105-123mm ID 123-141mm ID 141-159mm ID ET10 80-100mm ID 100-120mm ID 120-140mm ID 140-160mm ID 160-180mm ID 180-200mm ID 200-220mm ID 220-240mm ID ET14 150-180mm ID 180-210mm ID 210-240mm ID 240-270mm ID 270-300mm ID 300-330mm ID ET24 300-330mm ID 330-360mm ID 360-390mm ID 390-420mm ID 420-450mm ID 450-480mm ID 480-510mm ID 510-540mm ID 540-570mm ID 570-600mm ID