FSX 200 Intec No. : 609225420
CD identifier: MetaboSD2_0801i

Page 1 from 2

Item Part No. no. Part designation Cable with UL-CSA-plug Cable sleeve Fillister head screw Cable clip Terminal rail Field coil assembly w.field coil,120V Strand set condensor Switch Housing w.cover Metabo Label Dust collector cartridge compl. Brake ring Washer Countersunk screw Intermediate flange Backing pad Washer Lock washer Fillister head screw Fillister head screw Rating plate Rubber plug Brush holder complete Carbon brush set Ball bearing 6X 19X 6 Washer Switch guard Armature cpl. 240 V Washer Ball bearing, 9x26x8 Fan Bearing flange Washer BALL BEARING, 15x32x9 Baffle Wiring diagram pc 1 1
CD identifier: MetaboSD2_0801i Price/pc.

Page 2 from 2

WOOD SANDING MACHINES
SMOOTHING THE WAY TO PERFECTION.
Metabo manufacture a wide range of quality sanders for those who require a professional finish. The wide range allows the user to select exactly the right sander for the job, be it for sanding flat surfaces, curved surfaces, sanding into corners or along edges. Backed up with a wide range of accessories Metabo sanders are able to finish a whole host of materials, be it wood, metal, paints, varnish or filler. Metabo. Work. Dont play.
CONSIDERED THE BEST, NOT ONLY ON THE SURFACE. The Metabo range of sanders are considered amongst the best in the industry. Copied by many and perfected by none the Metabo sanding range gives you a choice of machines built to the demands of the professional. Be it for fine finishing, detail finishing, high stock removal or surface preparation Metabo has the sander and accessory to perfect the job in hand time and time again.
Ergonomic design Safe and comfortable work as it fits perfectly in the hand.
Electro-dynamic balancing system Fatigue-free work due to especially low vibrations.
Solid aluminium die cast bearing flange Guarantees a longer service life of the machine.
Four quality ball bearings protected ideally against dust Longer service life due to ideal dust protection.
External dust extraction or extraction by Intec filter system possible (accessory)
Quick clamping system For the fast and comfortable change of the sanding sheet.
Die-cast aluminium oscillating plate More robust material provides longer service life.
Sanding up to the outermost corner Oscillating plate without protruding parts.
Metabo power control system A built-in backing pad brake limits scratches when placing the tool on the material. This means that no manual postprocessing is needed. This makes the disc sander particularly suitable for sanding very thin materials and sensitive surfaces.
Unique Duo oscillating circuit setting Two adjustment options provide 100% finer surfaces with the small oscillating circuit diameter and 70% more material removal with the large one.
DSE 300 Intec the first triangular base-plate sander with integrated dust extraction unit No obstructive suction hose; the dust is collected in the integrated dust container.

ANGLE GRINDERS

Which sanding machine for which application?
Application Type and output Page METAL PROCESORS ROUTERS AND PLANERS WOOD SANDING MACHINES SCREWDRIVERS DRILLS IMPACT DRILLS HAMMERS
Delta sander with comfortable one-hand operation and dust extraction unit. Low weight with good material removal. Suitable for sanding at places difficult to reach such as corners, edges, intermediate spaces. Disc sander with comfortable one-hand operation and dust extraction unit. Grinding at places difficult to reach such as corners, profiles, edges, intermediate spaces. Suitable for grinding heat-sensitive materials and surfaces. Removal of carpet or tile adhesive (with scraper, accessory). Particularly suitable for sanding inner and outer curves. Small backing pad diameter and low housing shape for sanding at places difficult to reach. Suitable for sanding heat-sensitive materials and surfaces. Disc sander with comfortable one-hand operation and dust extraction unit. Low weight with good material removal. Suitable for sanding wood, plastic and metal on even and slightly curved surfaces. Large material removal and finest sanding on even and curved surfaces. Suitable for sanding wood, plastic and metal on even and slightly curved surfaces. Intec dust extraction unit. Substantial material removal and finest grinding finish on even and domed surfaces. Suitable for sanding heat-sensitive materials and surfaces. Grinding of very thin materials (e.g. veneers). Universal applications due to Duo-oscillating circuit setting. Large material removal and finest grinding on even and curved surfaces. Suitable for sanding heat-sensitive materials and surfaces. Grinding of very thin materials (e.g. veneers). Sander with comfortable one-hand operation and dust extraction unit. Low weight with good material removal. Suitable for sanding wood, plastic and metal on even and slightly curved surfaces. Robust sander, designed for commercial use. Sanding of wood, plastic, metal, stone on even or slightly curved surfaces. With integrated dust extraction unit for dust-free work without suction hose. Sanding of wood, plastic, metal, stone on even or slightly curved surfaces. Excellent weight-output ratio for hard and long hours of working, as well as working overhead. Fine sanding results when sanding wood, plastic, metal and stone. Sanding on even or slightly curved surfaces. Clean work with integrated sanding dust extraction. Like SR 356, however with large sanding disc for quicker material removal. NEW

FMS 200 Intec 200 W

DSE 300 Intec 300 W

SX E W

FSX 200 Intec 200 W

SXE 325 Intec 250 W

SXE 425 TurboTec 320 W

SXE 450 TurboTec 350 W

FSR 200 Intec 200 W

SR 10-23 Intec 200 W

SR 20-W

Sr W Sr E W

Fine sanding results when sanding wood, plastic, metal and stone. Sanding on even or slightly curved surfaces. Suitable for sanding heat-sensitive materials and surfaces. Clean work with integrated sanding dust extraction. Like SR E 357, however with large sanding disc for quicker material removal.

Sr E W Ba E 1075 1.000 W

For sanding large, even areas. For sanding notches and for working close to edges. Suitable for sanding heat-sensitive materials and surfaces. Can also be used as fixed tool.
TRIANGULAR BASE-PLATE SANDERS
EQUIPMENT FEATURES Triangular base plate for sanding edges, corners and surfaces Light and handy machine for convenient one-hand operation Very good weight-performance ratio Vibration-damping, non-slip rubber coated handle Dust-proof ball bearing Velcro-faced base plate Dust extraction unit with Intec filter system, with washable filter cartridge EQUIPMENT FEATURES Universal use for sanding wood, plastics, metals and stone Also suitable for louvre sanding and for sanding varnished surfaces Robust gear design for severe applications Spindle with dustproof triple ball bearing design Base plate holder and base body in sturdy aluminum High stock removal Variospeed (V) electronics Thumbwheel for preselection of orbital frequency PU-foamed base plate enables flexible adjustment to the workpiece surface Velcro-faced base-plate High extraction output Dust extraction unit Ideal handling by slim handle and handy recessed grips Low housing Rotatable base plate without tools (360) External dust extraction outlet

FMS 200 Intec

DSE 300 Intec
200 Watt Multisander FMS 200 Intec
300 Watt Electronic Triangular Base-Plate Sander DSE 300 Intec Comparative device characteristics Base plate size (corner to corner) Orbital frequency at no-load Orbital frequency at rated load Rated input power Oscillating circuit Weight (without mains cable) Standard equipment
Comparative device characteristics Base plate Orbital frequency at no-load Rated input power Output power Orbital frequency at rated load Oscillating circuit Weight (without mains cable) Standard equipment
100 x 147 mm 26.000 /min 200 W 80 W 22.000 /min 1,4 mm 1,25 kg 3 cling-fit sanding sheets (perforated), dust collector cartridge, 1 pleated filter, carry case

93 mm 14.000 - 22.000 /min 18.000 /min 300 W 1,8 mm 1,3 kg 3 perforated sanding sheets (P 60, P 100, P 240), carry case

Type Order no.

FMS 200 Intec 6.00065

DSE 300 Intec 6.00311

ACCESSORIES

FOR THE FMS 200 INTEC

Velcro-faced base-plates Order no. Sanding plate, perforated Sanding plate for FSR 200 Intec (as spare) Dimensions: 147 x 100 mm 6.6.31663 METAL PROCESORS ROUTERS AND PLANERS WOOD SANDING MACHINES SCREWDRIVERS DRILLS 6.24996 6.31593 Order no. Carry case Cling-fit cleaning nylon web 6.24957 6.25447 IMPACT DRILLS HAMMERS ANGLE GRINDERS Scraper blade For easy removal of old paint, glue, and other residues Blade width mm 30 Order no. 6.31662

6.31664

50 Dust collection box Order no. Dust collector cartridge Dust collector cartridge including dust filter 6.25602 6.25601

Carbide-tipped

6.31661
Order no. Spatula Made of spring sheet-steel Blade width: 60 mm 6.31659
Pleated filter Pleated filter, polyester, for dust collector cartridge (6.25601) Connector Connector 35 mm for connecting to a normal vacuum cleaner

6.25602

Dust extraction accessories Order no.

6.26996

FOR FOR DSE 300 INTEC
Velcro-faced base-plates Order no. Perforated velcro-faced base-plate For the triangular base-plate sanders DSE 300 and DSE 300 Intec (as spare) Dimension from corner to corner: 90 mm special louvre base-plate Velcro-faced at the bottom side. The self-adhesive velcro-faced liner supplied can be fitted to the top of this base-plate so that cling-fit sanding sheets can be fitted for top and bottom sanding of louvres. Self-adhesive liner Self-adhesive velcro-faced liner (as spare for special louvre base-plate 6.24971) Cling-fit abrasive nylon web, corundum abrasive Grit: P 100 Grit: P 280 6.24992
Dust collector cartridge For dust extraction unit with DSE 300 Intec 10 dust filters For the dust collector cartridge 6.24993 of the DSE 300 Intec Extraction nozzle For external extraction for DSE 300/ DSE 300 Intec Suction hose Connector with internal 30 mm and connector with outer 35 mm Hose length: 5 m Suction hose : 19 mm Adapter For connecting the suction hose with connector 35 mm to an extraction nozzle 30 mm Connector For connecting suction hose 6.31592 ( 30/35 mm connection) to a household vacuum cleaner

6.24993

6.24995

6.24994

6.31592

6.24971

6.24972
Other accessories 6.24958 6.24959

Cling-fit polishing felt Hard

6.24949

DISC SANDERS
EQUIPMENT FEATURES Very suitable for sanding inner and outer curves Light and handy machine for convenient one-hand operation Rotating and additional oscillating movement of backing pad for optimum finish Variospeed (V) electronics Thumbwheel for preselection of speed Limit scratches while placing the running machine on the material (Power Control System) Clean sanding result in narrow rails Excellent result even for polishing smaller surfaces Low housing Especially quiet through electro dynamic fine balancing Optimum power transmission through reduced crown wheel gear Long service life through spindle with dustproof triple ball bearing design Velcro-faced backing pad External dust extraction outlet EQUIPMENT FEATURES Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Light and handy machine for convenient one-hand operation Very good weight-performance ratio Dust-proof ball bearing Velcro-faced backing pad Vibration-damping, non-slip rubber coated handle Dust extraction unit with Intec filter system, with washable filter cartridge

SX E 400

FSX 200 Intec
220 Watt Electronic Disc Sander SX E 400 Comparative device characteristics Diameter of backing pad No load speed Rated input power Output power Rated load speed Oscillating circuit Weight (without mains cable) Standard equipment Comparative device characteristics Diameter of backing pad No load speed Rated input power Output power Rated load speed Oscillating circuit Weight (without mains cable) Standard equipment
240 Watt Palm Grip Random Orbital Sander FSX 200 Intec
80 mm 5.000 - 10.000 /min 220 W 100 W 6.000 /min 3 mm 1,2 kg 5 perforated cling-fit sanding sheets, cling-fit intermediate disc, allen key
125 mm 11.000 /min 240 W 90 W 9.500 /min 2,7 mm 1,3 kg 3 perforated cling-fit sanding sheets, dust collector cartridge, 1 pleated filter, carry case

SX E 400 6.00405

FSX 200 Intec 6.09225
EQUIPMENT FEATURES Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Variospeed (V) electronics Thumbwheel for preselection of speed Limit scratches while placing the running machine on the material (Power Control System) Dust-proof ball bearing Velcro-faced backing pad Dust extraction unit with Intec filter system, with washable filter cartridge EQUIPMENT FEATURES TurboBoost switch: allows additional power reserves to be employed for achieving maximum removal Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Rotating and additional oscillating movement of backing pad for optimum finish Variospeed (V) electronics Thumbwheel for preselection of speed Limit scratches while placing the running machine on the material (Power Control System) Removable front handle Dust-proof ball bearing Sturdy aluminum die cast bearing housing Velcro-faced backing pad Vibration damping, non-slip rubber support on the machine housing and the handle Dust extraction unit with Intec filter system, with washable filter cartridge External dust extraction outlet ANGLE GRINDERS

FOR FSX 200 INTEC, SXE 325 INTEC AND SXE 425 TURBOTEC

Velcro-faced backing pad

FOR SXE 325, SXE 425 TURBOTEC AND SXE 450 TURBOTEC

Order no.

Diameter mm 122 125

Hardness

Version
Suitable for machine FSX 200 Intec Backing pad, diameter 125 mm Backing pad, diameter 125 mm
Order no. 6.25658 6.31220
Dust collector cartridge Can be cleaned several times with pleated filter 6.31980 For SXE 325 (as spare)

6.31981

Medium Soft

Perforated Perforated

Medium-hard

Perforated

6.31219 NEW
Dust collector cartridge Can be cleaned several times with pleated filter 6.31980 For SXE 425 TurboTec and SXE 450 TurboTec (as spare) Pleated filter Polyester (as spare), for the dust collection box (6.31981 and 6.25599) Dust bag holder, complete As spare, with 1 dust bag Dust bag Without dust bag holder 6.31289, as space, pack of 5 Dust bag Can be used in the dust bag holder (6.31289) instead of the paper dust bag provided (6.31288) Carry case For SXE 425, SXE 425 XL, SXE 450 Duo

6.25599

6.31980
Order no. Velcro-faced intermediate disc Diameter: 125 mm Hardness: Soft Version: Not perforated Cling-fit polishing sponge Diameter: 130 mm 6.31216

6.31289

6.31222

6.31288

Cling-fit lambswool polishing disc Diameter: 130 mm

6.31223

6.31758
Cling-fit polishing felt, hard Diameter: 130 mm Thickness: 5 mm

6.31242

6.23894
ACCESSORIES FOR SXE 450 TURBOTEC
EQUIPMENT FEATURES TurboBoost switch: allows additional power reserves to be employed for achieving maximum removal Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel Rotating and additional oscillating movement of backing pad for optimum finish Variospeed (V) electronics Thumbwheel for preselection of speed Limit scratches while placing the running machine on the material (Power Control System) "Duo" Oscillating circuit setting for finishing or more cut Removable front handle Dust-proof ball bearing Sturdy aluminum die cast bearing housing Velcro-faced backing pad Vibration damping, non-slip rubber support on the machine housing and the handle Dust extraction unit with Intec filter system, with washable filter cartridge External dust extraction outlet Velcro-faced backing pad ANGLE GRINDERS Version Perforated (6 holes) Perforated (6 holes) Perforated (6 or 8 holes) 6.31158 6.31156 6.31150 Version Perforated (6 holes) Order no. HAMMERS ROUTERS AND PLANERS WOOD SANDING MACHINES SCREWDRIVERS DRILLS IMPACT DRILLS Order no. Cling-fit polishing sponge Diameter: 160 mm Packing unit: 1 Suitable for machine: Backing pad, diameter 150 mm Cling-fit lambswool polishing disc For high-gloss polishing Suitable for: System 150 mm Diameter: 160 mm Packing unit: 1 Cling-fit polishing felt Diameter: 150 mm Thickness: 5 mm 6.31233 6.31217 6.31168 6.24038 6.24039 Order no. Carry case For SXE 425, SXE 425 XL, SXE 450 Duo 6.23894 6.24619 6.31169 Order no. Velcro-faced intermediate disc For sanding curved surfaces Velcro-faced intermediate disc, for machining curved areas Diameter: 150 mm Hardness: Soft Version: Not perforated 6.24037

200 Watt Sander SR 10-23 Intec

210 Watt Sander SR 20-23

114 x 102 mm 26.000 /min 200 W 80 W 22.000 /min 1,4 mm 1,25 kg 3 cling-fit sanding sheets (perforated), dust collector cartridge, 1 pleated filter, carry case
92 x 183 mm 21.700 /min 200 W 90 W 18.000 /min 2,5 mm 1,75 kg 2 sanding sheets (perforated), dust collector cartridge, 1 pleated filter
92 x 183 mm 21.700 /min 210 W 95 W 16.000 /min 2,5 mm 1,8 kg 2 sanding sheets (perforated)

FSR 200 Intec 6.00066

SR 10-23 Intec 6.01024

SR 20-23 6.02026

COMMON FEATURES Universal use for sanding wood, plastics, metals, stone and varnished surfaces Powerful motor with high capacity reserve Even sanding pattern with high class base plate made of microcellular polyurethane elastomere Especially vibration-free by electrodynamic fine balancing 4 high quality oscillating buffers and dust-proof quality ball bearing for long service life with continuous use Solid aluminium die cast bearing housing Sturdy aluminum die cast oscillating plate ANGLE GRINDERS
Quick-grip clamping with rubber-coated pressure pad Sanding possible up to the outermost corner Dust extraction unit Dust bag holder with dust retaining flap External dust extraction outlet Auto-stop carbon brushes

Sr 356

Sr 358

Sr E 357

Sr E 359
Special advantages Variospeed (V) electronics Thumbwheel for preselection of orbital frequency Comparative device characteristics Base plate Orbital frequency at no-load Rated input power Output power Orbital frequency at rated load Oscillating circuit Weight (without mains cable) Standard equipment SCREWDRIVERS ROUTERS AND PLANERS Type Order no. Sr 356 6.00356 Sr 358 6.00358 Sr E 357 6.00357 Sr E 359 6.00359 WOOD SANDING MACHINES
92 x 190 mm 22.000 /min 350 W 190 W 15.000 /min 2,5 mm 2,5 kg 3 sanding sheets (perforated), removable side handle, dust bags (paper), dust bag holder
112 x 230 mm 22.000 /min 350 W 190 W 15.000 /min 2,5 mm 2,7 kg 3 sanding sheets (perforated), removable side handle, dust bags (paper), dust bag holder

92 x 190 mm 12.000 - 22.000 /min 350 W 190 W 15.000 /min 2,5 mm 2,6 kg 3 sanding sheets (perforated), removable side handle, dust bags (paper), dust bag holder
112 x 236 mm 12.000 - 22.000 /min 350 W 190 W 15.000 /min 2,5 mm 2,8 kg 3 sanding sheets (perforated), removable side handle, dust bags (paper), dust bag holder

350 Watt Sander Sr 356

350 Watt Sander Sr 358
350 Watt Electronic Sander Sr E 357
350 Watt Electronic Sander Sr E 359

ACCESSORIES FOR SANDERS

PERFORATED VELCRO-FACED BASE-PLATES
For the palm grip sander FSR 200 Intec Order no. Perforated, velcro-faced sanding plate FSR 200 Intec (as spare) Length: 114 mm Width: 112 mm 6.25657 For the sanders SR 10-23, SR 10-23 Intec and SR 20-23 Order no. Dust collector cartridge Can be cleaned several times with pleated filter 6.31980 Included in delivery with SR 10-23 Intec Pleated filter Polyester (as spare), for the dust collection box (6.31981) 6.31981
For the Sr 356 and Sr E 357 sanders For the sanders Sr 356, Sr E 357, Sr 358 and Sr E 359 Order no. The base-plate of sanders Sr 356/Sr E 357 can be replaced by the velcro-faced base-plate Length: 185 mm Width: 92 mm 6.24736 Dust bag holder, complete As spare, with 1 dust bag Order no. 6.31289
Dust bag Without dust bag holder 6.31289, as space, pack of 5 For the Sr 358 and Sr E 359 sanders Order no. The base-plate of sanders Sr 358/Sr E 359 can be replaced by the velcro-faced base-plate Length: 230 mm Width: 112 mm 6.24749 Dust bag Can be used in the dust bag holder (6.31289) instead of the paper dust bag provided (6.31288) Paper dust bag, complete Sawdust bag (paper) with connector (as spare) Dust bag Without dust bag holder 6.31385, as space, pack of 5 Order no. The perforated liner is stuck onto the sanding plate of sanders. The sanding plate should be free of dust and grease before applying the adhesive liner. Length: 191 mm Width: 93 mm 6.24709

6.31385

6.31286
Self-adhesive velcro-faced liner for the Sr 356 and Sr E 357 sanders

Hoses Order no. Suction hose With connector 58 mm for bayonet fitting and rubber connector (internal 30 mm, outside 35 mm) Hose length: 3,5 m 6.31938
DUST EXTRACTION ACCESSORIES
For the palm grip sander FSR 200 Intec Carry cases Order no. Dust collector cartridge Dust collector cartridge including dust filter 6.25602 6.25601
Order no. Sheet steel carry case For Sr 226, Sr E 227, Sr 356, Sr E 357, Sr 358, Sr E 359 6.31396
6.25602 Carry case For SR 10-23, SR 10-23 Intec, SR 20-23 6.26996 6.25448

BELT SANDERS

Accessories EQUIPMENT FEATURES Powerful and loadable motor with high reserve capacity Fast and easy sanding belt change Very good polished section by extremely precise belt path Excellent sanding results and comfortable operation by favourable centre of gravity position of the motor Metabo S-automatic torque limiting clutch Variospeed (V) electronics Thumbwheel for preselection of belt speed Auto-stop carbon brushes Side handle for ideal machine guidance Dust extraction unit External dust extraction outlet Suitable for stationary use Order no. Sanding frame For accurate sanding of flat surfaces with the belt sander Ba E 1075 6.31033 ANGLE GRINDERS ROUTERS AND PLANERS Type Order no. Ba E 1075 6.01075 WOOD SANDING MACHINES SCREWDRIVERS DRILLS IMPACT DRILLS Ba E Watt Electronic Belt Sander Ba E 1075 Comparative device characteristics Torque Sanding/grinding width Sanding belt supporting surface No-load belt speed Rated input power Rated load belt speed Weight (without mains cable) Standard equipment 7 Nm 75 mm 75 x 125 mm 200 - 380 m/min 1.000 W 320 m/min 3,8 kg Dust bag, 1 sanding belt P 100, side handle, suction adapter, base for fixed use HAMMERS METAL PROCESORS
Length guide For stationary use of the sander, can be tilted up to 45 for sanding bevels

6.31032

Bases for sanding belt Made from graphite-coated fabric Packing unit: 2 Base for sanding belt Comprising: spring sheetsteel with cork lining for rough grinding work with rapid material removal Packing unit: 1

6.31034

6.31037

SANDING MEDIUM

SOUND ARGUMENTS. A quality machine also needs a quality accessory. For sanders a wide range of accessories are required to give the best finish for a wide range of materials. Be it for wood, metal, stone, paint, varnish or filler Metabo has the right accessory for the machine and the material. At Metabo we do not just make accessories for our own machines but for other manufactures as well.
Structure and purpose of Metabo abrasive mediums
The sanding compound carries the grains and transfers the chip removal forces. Besides high strength and small expansion, the sanding compound has to render a sanding process matching flexibility. Carriers are Highly compressed papers of various thicknesses. Fabric based on polyester and cotton wool of various strengths. Vulcanized fibre as a strong and tear-proof base is the base material for the (Vulcan) fibre disc. The abrasive grain is the actual sanding tool. It penetrates the material to be worked on and removes the surface. The abrasive grain is anchored on the grainholding medium. High hardness, toughness and a sharp edged geometry are the most important attributes of the abrasive grain. For top quality sanding medium only synthetic abrasive grain materials are used. Abrasive grain types are Corundum (Aluminiumoxide) as a hard, slightly brittle grain for the processing of metal, wood, lacquers. of rough- and fine ground finishes. Silicon carbide as a hard, sharp-edged abrasive grain for processing of lacquer, wood, ceramic, glass, rubber. for rough and fine ground finish. Aluminous zircon as a tough and fine crystalline combination of Aluminiumoxide and aluminous zircon for the processing of metal and non-rusting materials. The bonding agent anchors the abrasive grain in the sanding compound carrier and supports it against the forces generated by the removal of the surface material. Bonding agents are Phenolic resins and partially synthetic resins for sufficient support with a certain elasticity.

Covering Abrasive grain bonding (Corundum, material silicone (Phenolic resin) carbide)

More grindactive Coat

Basic bond (Phenolic resin)
Sanding compound carrier: Paper, fabric, fibre or a P-G-combination
The quality of Metabo sanding mediums
for example for orbital sander: Wood + metal / wood + metal "professional" E-paper, pink aluminium oxide, resin bonded High quality grinding paper with dense dispersion and high material removal rate For the best results when sanding wood and metal in professional application Application: For veneers, solid wood, steel- and special steel sheeting, NE-special steels, light metals. e.g. for sanding veneered and foil covered furniture parts with hot-melt glue edging, decor sanding on special steel sheeting, refurbishment sanding and deburring of sheet edges
Special / special expert C-paper/ latex, silicone carbide, synthetic resin bonded, waterproof High quality sanding paper with dense grain distribution For best results in a professional as well as in a domestic environment. Ideal for wet-sanding of primed surfaces in body-workshops and on motorcar repairs Application: Especially for extremely hard surfaces, filler coat, filler, lacquers of all types e.g. when wet-sanding of primed surfaces and roughing up of all lacquered surfaces
for triangular base-plate sanders: Paint / paint professional B-/C-Paper, pink grade corundum, stearate-coated, resin bonded High quality sanding paper with medium-dense grain dispersion and a high material removal rate The special stearate coating ensures a long service life by not clogging the sanding medium For best results when sanding off paint, lacquer, body-filler on wood or metal on professional application Application: To deburr and clean veneer, solid wood, ply-wood and lacquered surfaces, deburring of veneered furniture edges
for example for disc sander: Wood / wood classic A-/B-Paper, normal corundum, resin-/glue bond High quality sanding paper with half-open grain distribution Best suited for sanding of wood with an outstanding price-performance ratio. Application: For wood generally, solid wood, veneers, plastic, acrylic glass, lacquer, spatula, fillers, e.g. for deburring, cleaning of plywood, veneer-, solid wood, lacquered surfaces, deburring of veneered furniture edges
Which sanding medium for which machine and for which manufacturer?
SANDING SHEETS FOR TRIANGULAR BASE-PLATE SANDERS 93 mm, 6 holes, velcro Metabo DSE 130 DSE 170 DSE 300 / Intec Bosch GDA 280 E PDA 100 PDA 120E PDE 180 / E PDA 240E PSM 160 Casals BLD 180 VLD 230 Makita BO mm, 6 holes, velcro Festo DX 93E/E Plus 125 mm, 8 holes, velcro Bosch GEX 125A / AC PEX 12A / AE PEX 125A - 1 PEX 125 AE PEX 400AE De Walt DW 423 Elu Fein Festo Kress ES 55E MSF 636-1 ES 125 / E CPS 6125-1 / E HEX 6385E HEX 1385E Skil Wegoma LRE 84H 100 x 150 mm, 7 holes, velcro Festo DS 400/E/EQ 150 mm, 6 holes, velcro Metabo SXE 425 XL SXE 450 DUO Bosch GEX 150AC/ACE PEX 15AE 100 x 150 mm, 11 holes, velcro Metabo FMS 200 Intec Bosch PSM 160 A PSM 80 A PRIO 105 mm, 6 holes, velcro AEG DSE 220 DSE mm, 6 holes, velcro Kress CDS 280 DSXL CDS 6425 EXL 150 mm, 8 holes, velcro SANDING SHEETS FOR DISC SANDERS 115 mm, 8 holes, velcro Bosch PEX11A/AE PEX 115 Einhell EX 115 Kress Skil CPS 6115-1/E 7415 Peugeot PAE 115 Stayer LRT 115 Metabo FSX 200 Intec SXE 125 SXE 425 AEG EX 400 EX 450 EXE 400 Atlas Copco TXE mm, 16 holes, velcro AEG EX 450 EXE 450 Atlas Copco TXE 150 Fein MSF 649-2A /-2B Holz Her mm, 9 holes, velcro Festo ET 2E RO 150E ES 150/3 EQ/C ES 150/5 EQ/C ProTool ESP 150 E AEG Fein EXE 450 MSF 636-1 MSF 649-2A/-2B Makita BO 6030 BO 6040 Skil Casals VEX 150 E Hilti PEX 420 AE DeWalt DW 443 Elu ES 56E/EK TP 522 AS WFE 380 WFE 450E Hitachi SAY 150A Kress 900 HEX Milwaukee ROS 150 E Peugeot PRX 150E Stayer LRT 150 RO 150 Wegoma RX 91 C Casals Festo Hitachi Makita Bosch Felisatti TP 521AS/EAS 93 x 185 mm, 8 holes, velcro Metabo SR 356 SR 357 SR4350 Atlas Copco VS 230/E VSS 22/E VSS 260/E GSS 23 AE GSS 230 A/AE PSS / A/AE PSS 180A PSS 240A/AE KLR 210 RS 3 SFE/E FS 10 SB 9036 TV 4102 7300/S Black&Decker KA 175 KA 186/E Einhell EST x 133 mm, 8 holes, velcro Atlas Copco Bosch Festo VS 11 Black&Decker P 63-01 GSS 16 A RS 4 / E / STF Felisatti TP 31 E Hitachi SV 8 SA 80 x 166 mm, 8 holes, tightened Atlas Copco VS 11 Black&Decker P 63-01 Bosch GSS 16A Hitachi SV 8 SA Wegoma LRE 84H 93 x 178 mm, 8 holes, velcro SANDING SHEETS FOR SANDERS

Hitachi TSV 13Y

LRS 93G LRS 93M RS 3/E RS 4/E/STF

Peugeot PV 240 A

93 x 230 mm, 8 holes, tightened Metabo SR 10-23 SR 10-23 Intec SR 20-23 SR 226 SR 356 SR 4350 SRE 227 SRE 357 Atlas Copco VS 230 VSE 230 VSS 260 VSSE 260 Black&Decker BD 175 BD 180 E CD 400 DN 41 AE DN 180E KA 196 Bosch GSS 23/AE GSS 230A/AE PSS 23/A/AE PSS 230 PSS 240A/AE Festo RS 3 SFE RS 3E SFE Makita Peugeot PV 240 A TV 4102 Ryobi NS 401 NS 801 S 35 Skil S x 230 mm, 8 holes, tightened AEG VS 230 VSS 260/E Black&Decker KA 185 KA 185E 93 x 280 mm, 8 holes, tightened Velcro for extended grinding disc Bosch GSS 23AE GSS 230 A/AE
115 x 115 mm, 8 holes, velcro Metabo SRA 60 SRE 217 Hitachi SV 12 SF Makita x 140 mm, 6 holes, tightened Metabo FSR 200 Intec Makita BO 4553/4554 Hitachi SV 12 SF 115 x 140 mm, 8 holes, tightened Black&Decker SR 400 Bosch GSS 9,6V GSS 140 A DeWalt DW 411 Makita BO 4553 BO 4554 BO 4556 Ryobi Skil 115 x 230 mm, 14 holes, velcro Metabo SR 358 SR 4351 SRE 359 Atlas Copco VS 280/E VS 280/SE VSE 230 VSS 20 E Black&Decker KA 273 Bosch GSS 28/A/AE GSS 280A/AE PSS 28 AE PSS 280AE Casals BLR 250 VLR 300 Einhell ERU 270 Elu Festo VS 41 VS 71 RS 1 STF RS 2 STF/E Hitachi SV 12SD/V Kress CRS 6165A CRS 6175EA Makita 9045B/N 9046 Peugeot TV 4003 TV 4103 Ryobi NS 6200 NS 6300 A Skil

BO 4553 / 4554 SV 12 SF

115 x 280 mm, 14 holes, tightened Metabo SR 328 SR 4321 SRE 329 VS 280/SE VSE 230 VSS 20/E Black&Decker BD 273 DN 41 AE KA 273 P 63-03/-04/-05 SR 410E Bosch GSS 28 A GSS 280A/AE PSS 28AE PSS 280AE 115 x 280 mm, 14 holes, tightened Casals BLR 250 LN 216 LR 228 Elu Kress VS 41 / 71 CRS 6165A CRS 6175ES Makita BO 4900 V 9046 Hitachi SV 12 SD/V Atlas Copco VS 280/E

S 605 D 7576U

115 x 103 mm, 6 holes, velcro
Metabo FSR 200 Intec Hitachi Makita
115 x 107 mm, 6 holes, velcro

Bosch GSS 140 A

ABRASIVE ACCESSORIES
CLING-FIT SANDING SHEETS FOR MULTISANDERS
Cling-fit sanding sheets for wood and metal, "professional" series Dimensions mm Grit Packing unit Order no.
CLING-FIT SANDING SHEETS FOR TRIANGULAR BASE-PLATE SANDERS
Cling-fit sanding sheets 100 x 150 mm, 7 holes 100 x x x x x x x x 150 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 25 6.25671 6.25672 6.25673 6.25674 6.25675 6.25676 6.25677 6.25678
Cling-fit sanding sheets 93 x 93 mm, 6 holes 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P 93 x 93 P Cling-fit sanding sheets 95 x 95 mm, 6 holes 95 x x x x x x x x 95 P 40 P 60 P 80 P 80 P 120 P 180 P 240 P 25 6.24940 6.24941 6.24942 6.24943 6.24944 6.24945 6.24946 6.24947 6.24980 6.24981 6.24982 6.24983 6.24984 6.24985 6.24986 6.24987

6.26097 6.26098 6.26099 6.26100 6.26101 6.26102 6.26103 6.26104 6.26105
6.25715 6.25716 6.25717 6.25718 6.25719 6.25720 6.25721 6.25722 6.25723 Order no.
6.31226 6.31227 6.31228 6.31229 6.31230 6.31231 6.31236 6.31237 6.31584 6.31585 6.31586 6.31587 6.31588 6.31589 6.31596 6.31597
25 cling-fit sanding sheets Assortment (10 x P 60, 10 x P 80, 5 x P 120) Diameter: 80 mm Version: Perforated (6 holes) 6 cling-fit sanding sheets Assortment (2 x P 60, 2 x P 120, 2 x P 240) Diameter: 115 mm Version: Perforated (8 holes) 6 cling-fit sanding sheets Assortment (2 x P 60, 2 x P 120, 2 x P 240) Diameter: 125 mm Version: Perforated (8 holes) 25 cling-fit sanding sheets Assortment (10 x P 60, 10 x P 80, 5 x P 120) Diameter: 125 mm Version: Perforated (8 holes) 25 cling-fit sanding sheets Assortment (10 x P 60, 10 x P 80, 5 x P 120) Diameter: 150 mm Version: Perforated (6 holes)

6.24060

6.26106
Cling-fit sanding sheets for paints and lacquers, "professional" series Diameter mm Grit
Cling-fit sanding sheets 80 mm, 6 holes 80 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 320 P 400
Diameter mm Grit Packing unit Order no.
SANDING SHEETS FOR SANDERS / ORBITAL SANDERS
Sanding sheets wood and metal, "professional" series Dimensions mm Grit Packing unit Order no.
Cling-fit sanding sheets 115 mm, 8 holes 115 P 115 P 115 P 115 P 115 P 115 P 115 P 115 P 115 P Cling-fit sanding sheets 125 mm, 8 holes 125 P 125 P 125 P 125 P 125 P 125 P 125 P 125 P 125 P Cling-fit sanding sheets 150 mm, 6 holes 150 P 150 P 150 P 150 P 150 P 150 P 150 P 150 P 150 P Cling-fit sanding sheets 150 mm, 9 holes 150 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 320 P 6.26107 6.26108 6.26109 6.26110 6.26111 6.26112 6.26113 6.26114 6.26115
Cling-fit sanding sheets 80 x 133 mm, 8 holes, with velcro 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P Cling-fit sanding sheets 93 x 185 mm, 8 holes, with velcro 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P Sanding sheets 93 x 230 mm, 8 holes, for clamping 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P Cling-fit sanding sheets 103 x 115 mm, 6 holes, with velcro 103 x x x x x x x x x 115 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 320 P 6.25749 6.25750 6.25751 6.25752 6.25753 6.25754 6.25755 6.25756 6.25757 6.26052 6.26053 6.26054 6.26055 6.26056 6.26057 6.26058 6.26059 6.26060

6.25726 6.25727 6.25728 6.25729 6.25730 6.25731 6.25732 6.25733 6.25734
6.24028 6.24029 6.24030 6.24031 6.24032 6.24033 6.24034 6.24035 6.24036
6.25738 6.25739 6.25740 6.25741 6.25742 6.25743 6.25744 6.25745 6.25746 Order no.
25 cling-fit sanding sheets Assortment (10 x P 60, 10 x P 80, 5 x P 120) Diameter: 80 mm Version: Perforated (6 holes) 25 cling-fit sanding sheets Assortment (10 x P 60, 10 x P 80, 5 x P 120) Diameter: 115 mm Version: Perforated (8 holes) 25 cling-fit sanding sheets Assortment (10 x P 60, 10 x P 80, 5 x P 120) Diameter: 125 mm Version: Perforated (8 holes) 25 cling-fit sanding sheets Assortment (10 x P 60, 10 x P 80, 5 x P 120) Diameter: 150 mm Version: Perforated (6 holes)

6.24090

6.25765 6.25766 6.25767 6.25768 6.25769 6.25770 6.25771 6.25772 6.25773 6.25775 6.25776 6.25777 6.25778 6.25779 6.25780 6.25781 6.25782 6.25783

6.26116

6.25735

6.24069

6.24480 6.24481 6.24482 6.24483 6.24484 6.24485 6.24486 6.25761 6.25762
6.25619 6.25620 6.25621 6.25622 6.25623 6.25624 6.25625 6.25626 6.25627
ANGLE GRINDERS ROUTERS AND PLANERS WOOD SANDING MACHINES SCREWDRIVERS DRILLS IMPACT DRILLS HAMMERS METAL PROCESORS Dimensions mm Grit Packing unit Order no. Sanding sheets for wood, "classic" series Dimensions mm Grit Packing unit Order no.
Sanding sheets 115 x 140 mm, 6 holes, for clamping 115 x 140 P 115 x 140 P 115 x 140 P 115 x 140 P 115 x 140 P 115 x 140 P 115 x 140 P 115 x 140 P 115 x 140 P Cling-fit sanding sheets 115 x 230 mm, 14 holes, with velcro 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P Sanding sheets 115 x 280 mm, 14 holes, for clamping 115 x x x x x x x 280 P 40 P 60 P 80 P 100 P 120 P 180 P 6.25629 6.25630 6.25631 6.25632 6.25633 6.25634 6.25635 6.25636 6.25637
Cling-fit sanding sheets 93 x 185 mm, 8 holes, with velcro 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P Sanding sheets 93 x 230 mm, non-perforated, for clamping 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P Sanding sheets 93 x 230 mm, 8 holes, for clamping 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P Cling-fit sanding sheets 115 x 115 mm, 8 holes, with velcro 115 x 115 P 115 x 115 P 115 x 115 P 115 x 115 P 115 x 115 P 115 x 115 P Sanding sheets 115 x 140 mm, 8 holes, for clamping 115 x x x x x x 140 P 40 P 60 P 80 P 100 P 120 P 10 6.25813 6.25814 6.25815 6.25816 6.25817 6.25818 6.25819 6.25820 6.25822 6.25823 6.25824 6.25825 6.25826 6.25827 6.25828 6.25829

Cling-fit sanding sheets 80 x 133 mm, 8 holes, with velcro 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P 80 x 133 P Cling-fit sanding sheets 93 x 185 mm, 8 holes, with velcro 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P 93 x 185 P Sanding sheets 93 x 230 mm, 8 holes, for clamping 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P 93 x 230 P Cling-fit sanding sheets 103 x 115 mm, 6 holes, with velcro 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P 103 x 115 P Sanding sheets 115 x 140 mm, 6 holes, for clamping 115 x x x x x x x x 140 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 10 6.25851 6.25852 6.25853 6.25854 6.25855 6.25856 6.25857 6.25858
6.24816 6.24817 6.24818 6.24819 6.24820 6.24821 6.24822 6.25810
6.25881 6.25882 6.25883 6.25884 6.25885 6.25886 6.25887 6.25888
Sanding sheets 115 x 280 mm, 14 holes, for clamping 115 x x x x x x x x 280 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 10 6.24800 6.24801 6.24802 6.24803 6.24804 6.24805 6.24806 6.25809
6.25861 6.25862 6.25863 6.25864 6.25865 6.25866 6.25867 6.25868
Order no. 10 cling-fit sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 93 x 185 mm Version: Perforated (8 holes) 10 sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 93 x 230 mm Version: Perforated (8 holes) Sanding sheet assortment Comprising 2 sanding sheets in each of the following grits: P 40, P 80, P 120, P 180, and P 240 Dimensions: 93 x 230 mm Version: Not perforated 10 cling-fit sanding sheets Comprising 2 sanding sheets in each of the following grits: P 40, P 80, P 120, P 180, and P 240 Dimensions: 115 x 230 mm Version: Perforated (14 holes) 10 sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 115 x 280 mm Version: Perforated (14 holes) 10 sanding sheets Assortment (2 each of P 40, P 80, P 120, P 180 and P 240) Dimensions: 115 x 280 mm Version: Not perforated 6.25821
6.25639 6.25640 6.25641 6.25642 6.25643 6.25644 6.25645 6.25646

6.24833

6.24815

6.25840

6.25648 6.25649 6.25650 6.25651 6.25652 6.25653 6.25654 6.25655

6.24807

6.24823
ANGLE GRINDERS ROUTERS AND PLANERS WOOD SANDING MACHINES SCREWDRIVERS DRILLS 6.26033 6.26034 6.26035 6.26036 6.26037 6.26038 6.26039 6.6.26043 6.26044 6.26045 6.26046 6.26047 6.26048 6.26049 6.26050 6.26051 IMPACT DRILLS HAMMERS METAL PROCESORS Dimensions mm Grit Packing unit Order no. Rolls for wood, "classic" series Dimensions mm Grit Packing unit Order no. 6.26003 6.26004 6.26005 6.26006 6.26007 6.26008 6.26009 6.26010 6.26013 6.26014 6.26015 6.26016 6.26017 6.26018 6.26019 6.26020
Cling-fit sanding sheets 115 x 230 mm, 14 holes, with velcro 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P 115 x 230 P Sanding sheets 115 x 280 mm, 14 holes, for clamping 115 x x x x x x x x 280 P 40 P 60 P 80 P 100 P 120 P 180 P 240 P 25 6.25891 6.25892 6.25893 6.25894 6.25895 6.25896 6.25897 6.25898