Lubrication system for long service life of the gear Optimum sawing dust ejection External dust extraction outlet Extraction nozzle rotatable and stoppable Auto-stop carbon brushes Precision guide rail available as accessory (order no. 6.31213) Adjustment of machine without tools for using on the precision guide rail 6.31213
KS 66 Plus NEW 1400 Watt Circular Saw KS 66 Plus Special advantages Quick stop of saw blade on shutting off the machine Vario Tacho Constamatic (VTC) full-wave electronics Thumbwheel for preselection of speed Electronic soft start Overload protection Two position riving knife lift point Comparative device characteristics Torque Maximum cutting depth at 90 Maximum cutting depth at 45 Cutting depth adjustable Saw blade diameter No load speed Rated input power Output power Rated load speed Cutting speed at rated load Weight (without mains cable) Standard equipment
KSE 68 Plus NEW 1600 Watt Electronic Circular Saw KSE 68 Plus
Carbide thin circular saw blade (14 teeth), parallel guide/ripping fence, allen key

KS 66 Plus 6.00544

KSE 68 Plus 6.00545

COMPRESSED AIR SYSTEMS

WELDING TECHNOLOGY
11 Nm 68 mm 48 mm 0 - 68 mm 190 mm 2.000 - 4.200 /min 1.600 W 850 W 4.200 /min 42 m/s 5,6 kg

WATER-/PUMP TECHNOLOGY

WOOD-PROCESSING TECHNOLOGY

GARDEN

SYSTEMATIC ORGANISATION

SPECIAL-PURPOSE MACHINES

ACCESSORIES FOR CIRCULAR SAWS
Accessories Order no. 6.31213 Precision guide rail Clean-cut edges with no splintering thanks to the guide rail's plastic-extrusion strip edging even with bevel cuts up to 45 Guide rail made of sturdy, anodised Aluminium extrusion Anti-slip backing provides safe and reliable support and protects the workpiece surface against scratches Guide rule, adjustable to eliminate play suitable for: Metabo jig saws, circular saws and router models OFE 738 and Of E 1229 Signal (when using the appropriate accessories; KS 66 Plus, KSE 68 Plus can be used) Overall length: 1.500 mm 6.31211 Connector For joining together two precision guide rails NEW Work benches Order no.
NEW Set of two clamps For fixing the precision guide rail on the workpiece or work table NEW Guide plate For use with the KSAP 18, KS 54 and KS 54 SP circular saws on the 6.31213 guide rail. Complete guide plate with 2 mounted aluminium threaded bushes for the circular saws Adapters For use with the KS 66 and KSE 68 Plus circular saws (alt. Order No. 6.00543) on the 6.31213 guide rail. Sawdust ejection nozzle Can be rotated For fitting the suction hose on the circular saw KS 54 and KSE 55 Plus Suction hose With connector 58 mm for bayonet fitting and rubber connector (internal 30 mm, outside 35 mm) Connector : 58/35 mm Hose length: 3,5 m Suction hose : 27 mm Metabox IV Extremely robust, unbreakable boxes with a wide carrying handle Carefully thought-out organisation system within the box. ensures that the correct accessory is always with the right tool - special inserts for storing accessories and small parts. and transferring them from box to box - boxes can be stacked and connected - well-structured, clearly arranged storage system, for the workshop, the car, anywhere The Metabox stays in shape even at extreme temperatures (-40 to +90C) No protruding parts, and thus no danger of getting caught up, e.g. on building sites Dimensions: 395 x 295 x 315 mm For KS 54, KSE 55 Plus, KS 66 For KS 66 Plus, KSE 68 Plus 6.31019 6.31031

Flexo 500 universal table For the stationary use of Metabo jig saws, routers and circular saws (when using appropriate accessories) With foldable stand and height adjustment Sturdy steel construction and a large table top made from continuous strand casting

0910064304

Special accessories for Flexo 500 Order no. NEW 6.31020 Circular saw set For Metabo KS 54, KSE 55 Plus, KS 66, KSE 68 Plus circular saws Packaging dimensions (LxHxW): 750 x 280 x 130 mm Table width extension Increases the supporting surface; ideal for large boards Enables cuts with parallel guide of up to 610 mm Height adjustable Length: 674 mm Width: 501 mm Parallel guide/ripping fence For long cuts or for cutting large boards Long attachment profile for guiding the work piece safely Mitre guide Length of rule: 250 mm Angle area: +/- 60 Chip and dust extraction unit Extraction at two points: at chip box and at the top on the guard Clear view of the work piece Cleaner working environment Extraction nozzle : 100 mm 0910064398

6.30924

0910064401

6.31938

0910063707

0910064410

0910064371

6.24595 6.24598

CIRCULAR SAW BLADES

FOR CIRCULAR SAWS

Carbide-tipped circular saw blades "power cut" For fast, coarse and semi-fine cuts with continuous feed rates Good cutting results for straight cuts in solid wood Partly usable for construction wood with nails and concrete residue With coated wood or other composites only coarse cut quality is possible NEW Diameter mm 230 Cutting width mm 2,4 2,2 2,4 2,6 2,2 2,2 2,6 2,6 2,6 Steel blade thickness mm 1,6 1,4 1,6 1,8 1,4 1,4 1,8 1,8 1,8 Bore- mm 30 Number of teeth 24 Tooth form Rake angle 20 suitable for Order no. SPECIAL-PURPOSE MACHINES COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY WOOD-PROCESSING TECHNOLOGY GARDEN Order no. 6.28030 6.28031 6.28032 6.28033 6.28034 6.28035 6.28040 6.28044 Order no. 6.28000 6.28070 6.28071 6.28072 6.28073 6.28074 6.28075 6.28076 6.28077 6.28078 6.28079 6.28080 6.28085 6.28086 SYSTEMATIC ORGANISATION
Flat top tooth Alternately bevel-ground tips Flat top tooth Alternately bevel-ground tips Alternately bevel-ground tips Flat/trapezoid tooth Flat top tooth Flat/trapezoid tooth Alternately bevel-ground tips

Ks 0852 S KS 54 / KSE 55 Plus Ks 1155 S Ks 1266 S / Ks 1468 S KS 66 / KSE 68 Plus KS 66 / KSE 68 Plus Ks E 1678 S-Signal KS 85 KS 85
6.28001 6.28002 6.28003 6.28004 6.28005 6.280061) 6.28007 6.280101) 6.280111)
1) exceptionally nail-proof saw blade
Carbide-tipped circular saw blades "precision cut" Very wide range of uses in woodworking For very good, clean cut results with straight or cross cutting in softwood and hardwood Well suited for solid and plywoods, chipboards untreated, coated or veneered, MDF, composite materials The circular saw must have a high performance motor NEW Diameter mm Cutting width mm 1,6 2,2 2,4 2,4 2,6 2,2 2,6 2,6 Steel blade thickness mm 1,1 1,4 1,6 1,6 1,8 1,4 1,8 1,8 Bore- mm Number of teeth Tooth form Rake angle suitable for
Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips Alternately bevel-ground tips
KSAP 18 KS 54 Ks 1155 S Ks 1155 S Ks 1266 S/ Ks 1468 S KS 66 / KSE 68 Plus Ks E 1678 S-Signal KS 85
Carbide-tipped circular saw blades "multi cut" Universal use for demanding materials For the highest standards in cutting quality, e.g. laminate, plastic, aluminium, copper and bronze materials Ideally suited for many applications in interior work Perfect cutting results, also when crosscutting, in solid wood, coarse, coated or veneered chipboards, MDF The circular saw must have a very high performance motor Requires steady and relatively slow feed rates

Diameter mm 230 230

Cutting width mm 2,4 2,4 2,2 2,2 2,2 2,4 2,2 2,6 2,2 2,6 2,8 2,8 2,6 2,6
Steel blade thickness mm 1,6 1,6 1,4 1,4 1,4 1,6 1,4 1,8 1,4 1,8 2,0 2,0 1,8 1,8

Bore- mm 30 30

Number of teeth 60 60

Tooth form

Rake angle neg. 5+/-1.neg. 5+/-1.neg. neg. 5 neg. 5 neg. 5 8

suitable for

Alternately bevel-ground tips Flat/trapezoid tooth Alternately bevel-ground tips Alternately bevel-ground tips Flat/trapezoid tooth Flat/trapezoid tooth Alternately bevel-ground tips Flat/trapezoid tooth Flat/trapezoid tooth Flat/trapezoid tooth Alternately bevel-ground tips Flat/trapezoid tooth Alternately bevel-ground tips Flat/trapezoid tooth

Ks 0852 S Ks 0852 S KS 54 / KSE 55 Plus KS 54 / KSE 55 Plus KS 54 / KSE 55 Plus Ks 1155 S KS 66 / KSE 68 Plus Ks 1266 S / Ks 1468 S KS 66 / KSE 68 Plus Ks E 1678 S-Signal Ks E 1678 S-Signal Ks E 1678 S-Signal KS 85 KS 85

JIG SAWS

OTHERS SOMETIMES JUST DONT CUT IT. Metabo offer a solid range of Jigsaws from entry level through to top end professional machines. Backed up with an extensive range of accessories these machines are capable of cutting a whole host of materials from wood, metals, plastics, brick and breeze block to fiber glass and rubber. Important features include high powered motors, tough gear housings, solid blade supports and variable speed electronics to enable the right speed selection for the job in hand.
Vario Constamatic (VC) electronics allow you to set the right speed for the application and then maintain that speed, even under moderate loading.
Ergonomic design Safe and comfortable work due to a model that fits perfectly in the hand.
Die cast aluminium gear housing Metal gear housings ensure optimum integral machine strength and maximum heat dissipation which aids motor cooling and prolongs service life.
Metabo Quick saw blade change Fast, convenient and safe. Saw blade change without key.
Quick stop of guide plate It enables bevel cuts with angle settings of 15, 30 and 45.
5-level pendulum blade movement High cutting output, more comfortable working, longer service life of saw blades.
Saw blade support roller with needle bearing and guide groove Precise saw cuts, as the support roller is particularly deep.
Powerful for continuous professional use The 720-Watt electronic orbital jigsaws enable saw cuts of up to 135 mm thickness in wood.
Absolutely straight or circular cuts Additional accessories such as guide rails or circular guides expand the range of applications of the Metabo jigsaws.
Vario Constamatic (VC) full-wave electronics The number of strokes can be adapted individually to the material to be cut. For metal, for example, it is low, for wood it is high.
COMMON FEATURES Robust gear and motor design Easier and quicker saw blade change Low lying saw blade supporting roller Quick locking of guide plate for bevel cuts Ideal handling by ergonomic design Full grip bow type handle Blower for free view of cutting line Upward slidable grip-guard

Adjustable pendulum stroke External dust extraction outlet Auto-stop carbon brushes Chip break guard in the guide plate Precision guide rail and guiding device available as accessory Case for allen key

ST 50 Pendix

STE 70

STE 80 Quick

400 Watt Orbital Jig Saw ST 50 Pendix
Special advantages Metabo "Quick" saw blade change Vario Constamatic (VC) full-wave electronics Thumbwheel for preselection of number of strokes Comparative device characteristics Torque Maximum thickness of material in - Wood - Nonferrous metals - Sheet steel Levels of pendulum stroke Strokes at no load Rated input power Output power Weight (without mains cable) Standard equipment
50 mm 10 mm 3 mm 4 3.000 /min 400 W 240 W 2,2 kg Grip-guard, chip break guard plate, jig saw blade, allen key
70 mm 20 mm 6 mm 4 1.000 - 3.000 /min 570 W 340 W 2,2 kg Protective glass, grip-guard, chip break guard plate, jig saw blade, allen key
80 mm 25 mm 8 mm 4 1.000 - 3.000 /min 610 W 360 W 2,3 kg Protective glass, grip-guard, attachable guard plate with chip break guard plate, jig saw blade, allen key

ST 50 Pendix 6.04000

STE 70 6.05700

STE 80 Quick 6.06100

5,5 Nm
570 Watt Electronic Orbital Jig Saw STE 70
610 Watt Electronic Orbital Jig Saw STE 80 Quick
COMMON FEATURES Robust gear and motor design Low lying saw blade supporting roller Quick locking of guide plate for bevel cuts Ideal handling by ergonomic design Blower for free view of cutting line Upward slidable grip-guard Vario Constamatic (VC) full-wave electronics Thumbwheel for preselection of number of strokes
Adjustable pendulum stroke Die cast aluminium gear housing External dust extraction outlet Auto-stop carbon brushes Chip break guard in the guide plate Precision guide rail and guiding device available as accessory Case for allen key

STE 100 Plus

STE 135

STE 135 Plus

STEB 135

STEB 135 Plus

680 Watt Electronic Orbital Jig Saw STE 100 Plus Special advantages Powerful cutting in wood up to 135 mm thickness Easier and quicker saw blade change Metabo "Quick" saw blade change Rubber-coated full grip bow-type handle Slim motor housing and additional knob Comparative device characteristics Torque Maximum thickness of material in - Wood - Nonferrous metals - Sheet steel Levels of pendulum stroke Strokes at no load Rated input power Output power Weight (without mains cable) Standard equipment

720 Watt Electronic Orbital Jig Saw STE 135
720 Watt Electronic Orbital Jig Saw STE 135 Plus
720 Watt Electronic Orbital Jig Saw STEB 135
720 Watt Electronic Orbital Jig Saw STEB 135 Plus
110 mm 25 mm 8 mm 5 1.000 - 2.800 /min 680 W 400 W 2,6 kg Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key
135 mm 35 mm 10 mm 5 1.000 - 3.000 /min 720 W 450 W 2,5 kg Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key
135 mm 35 mm 10 mm 5 1.000 - 3.000 /min 720 W 450 W 2,6 kg Extraction nozzle, protective glass, grip-guard, chip break guard plate, jig saw blade, allen key

STE 100 Plus 6.10501

STE 135 6.11100

STE 135 Plus 6.10900

STEB 135 6.11200

STEB 135 Plus 6.11000

ACCESSORIES FOR JIG SAWS
Jigsaw blade assortments with single lug bayonet shank Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil. Order no. Jigsaw blade assortment 1 For wood and metal HCS saw blades/ HSS saw blade Consisting of 1 saw blade each: 6.23634, 6.23633, 6.23637 Material suitability: Wood, Metal Number of parts: 3 Jigsaw blade assortment 2 For wood, metal and plastic HCS saw blades/ HSS saw blade Consisting of 1 saw blade each: 6.23633, 6.23635, 6.23632, 6.23631 und 6.23637 Material suitability: Wood, Plastics, Metal Number of parts: 5 Jigsaw blade assortment 3 For wood, metal and plastic HCS saw blades/ HSS saw blades Consisting of 2 jigsaw blades each: 6.23634, 6.23633, 6.23646, 6.23637, 6.23638 Material suitability: Wood, Metal, Plastics Number of parts: 10 Jigsaw blade assortment 4 For wood HCS saw blades Consisting of 10 saw blades 6.23633 and 6.23635 and 5 saw blades 6.23649 Material suitability: Wood Number of parts: 25 6.23968 NEW Set of two clamps For fixing the precision guide rail on the workpiece or work table Jigsaw bench mounting plate With clamp for fixing on the workbench Table-top dimensions: 183 x 255 mm Flexo 500 universal table For the stationary use of Metabo jig saws, routers and circular saws (when using appropriate accessories) With foldable stand and height adjustment Sturdy steel construction and a large table top made from continuous strand casting Table width extension Increases the supporting surface; ideal for large boards Enables cuts with parallel guide of up to 610 mm Height adjustable Suitable for: UK 333, UK 290, Flexo 500 Length: 674 mm Width: 501 mm Lubricating stick For lubricating the jigsaw blades when sawing metal 3 chip break guard plates Suitable for: ST 50 Pendix, STE 70, STE 80 Quick 3 chip break guard plates Suitable for: STE 100 Plus, STE 135, STE 135 Plus, STEB 135, STEB 135 Plus Suction hose With connector 58 mm for bayonet fitting and rubber connector (internal 30 mm, outside 35 mm) Hose length: 3,5 m Suction hose : 27 mm Carry case For ST 50 Pendix, STE 70, STE 80 Quick 6.31031 Connector For joining together two precision guide rails Order no. 6.31211 SAWS 0910064304

6.23645

6.23600 NEW

6.23698

6.23443 WOOD-PROCESSING TECHNOLOGY COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY 6.25450 6.25446 6.24639

6.31208

Accessories Order no. Guard plate For fitting on the base plate of jigsaws. The guard plate protects sensitive workpiece surfaces from scratches Circle-cutting and parallel guide For cutting circles of 100 to 360 mm and for cutting parallel to an edge (maximum distance from the edge 210 mm) Guiding device For using jigsaws in conjunction with the guide rail 6.31250/ 6.31213 Precision guide rail Clean-cut edges with no splintering thanks to the guide rail's plastic-extrusion strip edging even with bevel cuts up to 45 Guide rail made of sturdy, anodised Aluminium extrusion Anti-slip backing provides safe and reliable support and protects the workpiece surface against scratches Guide rule, adjustable to eliminate play Overall length: 1.500 mm 6.23664

6.23665

6.31340

6.31249

6.31213 Carry case For STE 100 Plus, STE 105 Plus, STEB 105 Plus, STE 135, STE 135 Plus, STEB 135, STEB 135 Plus
Metabox I for ST 50-STEB 135 For ST 50 Pendix, STE 70, STE 80 Quick, STE 100 Plus, STE 135 Plus, STEB 135 Plus Dimensions: 395 x 295 x 105 mm

6.23689

JIG SAW BLADES
WITH THESES ONE ALWAYS MAKES A GOOD CUT.
The features of the Metabo jig saw blades

Colour

The colour indicates for which material the blade is suited best. Yellow for wood Yellow with blue lettering for wood with nails Blue for metal Black for special applications

Basic blade material

HCS HSS carbon steel, for cutting soft wood, hardboards, plastics High yielding high-speed steel, suitable for metal, aluminium work
BiM Bimetal especially flexible mix of HCS and HSS. The saw blades have a much higher life expectancy (bimetal) than HCS and HSS and have proven their worth when there is danger of shaft-breaking HM Hard-Metal (carbide) applicable to stainless steels, glass, re-inforced plastic, plastics, gypsum plaster or cement fibre boards. Saw blades with HM-coating are suitable for cutting ceramic tiles

Quality class

>classic< series >professional< series >pionier< series >expert< series good results and very good service life fast, clean and precise angle-cutting with long service life cuts fast through all materials ("through thick & thin") for special applications
Teeth milled, offset for clearance gap A relative rough cut, fast progress in cutting on hard and soft wood, aluminium, NE-metals and plastics
Teeth milled, waved for clearance gap A relative rough cut, fast progress in cutting hard and soft wood, aluminium, NE-metals and plastics
Teeth ground, offset for clearance gap Fast cutting in hard and soft wood
Teeth ground, offset for clearance angle and clearance gap Fine and clean cut in wood and plastics

Shank forms

The jig-saw blades from Metabo are produced to all shank forms matching the jig saws available from other brand names. Single lug bayonet shank U-Shank Makita-Shank Fine shank
Jig saw blades with single lug bayonet shank Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil. Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. SAWS COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY WOOD-PROCESSING TECHNOLOGY GARDEN SYSTEMATIC ORGANISATION SPECIAL-PURPOSE MACHINES
FOR WOOD, "CLASSIC" SERIES
Hard wood, Soft wood, Chipboards, Wood-core plywood 2-15 mm, Fibre boards 2-15 mm, Plastics, Insulating material

Milled, Crimped

2,0 mm

T 119 B

6.23631
Hard wood, Soft wood, Chipboards, Wood-core plywood 2-15 mm, Fibre boards 2-15 mm, Plastics, Insulating material, Saw blade with insertion head
1,9 - 2,3 mm/ 23-17 TPI/ progressiv

6.23920

Hard wood, Soft wood, Chipboards, Wood-core plywood 2-20 mm, Fibre boards 2-20 mm, Plastics, Insulating material, Especially for curved cuts

T 119 BO

6.23646 6.23605
Hard wood, Soft wood, Plastics, 4-50 mm, For quick, rough cuts

Milled, Crossed

3,0 mm

T 111 C

25 100
6.23963 6.23632 6.23606 6.23714
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood, Chipboards, Wood-core plywood 5-50 mm, For quick cuts

Ground, Crossed

4,0 mm

T 144 D

6.23964 6.23633 6.23690 6.23712
Hard wood, Soft wood, Chipboards, Wood-core plywood 5-50 mm, For quick cuts, Saw blade with insertion head
4-5,2 mm/ 6-5 TPI/ progressiv

6.23921

Hard wood, Soft wood, Chipboards, Wood-core plywood 5-50 mm, Especially for curved cuts

T 244 D

6.23966 6.23649 6.23607 6.23713
Hard wood, Soft wood, Chipboards, Wood-core plywood 5-50 mm, Especially for curved cuts, Saw blade with insertion head

6.23960

Hard wood, Soft wood, Chipboards, Wood-core plywood 2-15 mm, Fibre boards, For quick cuts

T 344 D

6.23678
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Constructional wood, Extra thick

T 744 D

6.23603
Soft wood, Plywood, Plastics, 1.5-5 mm, Especially for curved cuts, For clean cuts
Clearance angle ground, Tapered

1,4 mm

T 101 AO

6.23651 6.23624

Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no.

23634 HCS

>professional < Holz/wood >>
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Plastics, 3-30 mm, For clean cuts
Clearance angle ground, Teeth ground

2,5 mm

T 101 B
6.23961 6.23634 6.23691 6.23703
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Plastics, 3-30 mm, For clean cuts, Saw blade with insertion head

2,7 mm/ 9 TPI

6.23969
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, Coated boards, 3-30 mm, For clean cuts
Clearance angle ground, HCS Teeth ground, Reverse toothed

T 101 BR

6.23650 6.23608 6.23705
Hard wood, Soft wood, Chipboards, Wood-core plywood 10-45 mm, Fibre boards 10-45 mm, For clean cuts

T 101 D

6.23962 6.23635 6.23609 6.23704
Hard wood, Soft wood, Chipboards, Wood-core plywood 10-45 mm, Fibre boards 10-45 mm, For clean cuts, Saw blade with insertion head

6.23923

Hard wood, Soft wood, Chipboards, Wood-core plywood 4-60 mm, Fibre boards 4-60 mm, For clean cuts

T 301 CD

6.23654
Hard wood, Soft wood, Doors, Kitchen worktops 5-50 mm, For angle-precise cuts, Extra thick

T 144 DP

6.23694
Hard wood, Soft wood, Chipboards, Wood-core plywood 5-100 mm, Fibre boards 5-100 mm, For angle-precise cuts, Extra thick

Ground, Teeth ground

T 344 DP

6.23679

Kitchen worktops, Hard wood 3-65 mm, Soft wood 3-65 mm, Doors, For angle-precise cuts, Extra thick

T 301 BCP

6.23685
FOR WOOD, "PROFESSIONAL" SERIES, BIM
Hard wood, Soft wood, Coated boards, 5-50 mm, For quick cuts

T 144 DF

6.23976
Hard wood, Soft wood, Wood with nails, Coated boards, 5-50 mm, For quick cuts, Saw blade with insertion head

6.23933

Hard wood, Soft wood, Coated boards, 5-100 mm, For quick cuts

T 344 DF

6.23980
Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. SAWS Especially for laminate, Laminated flooring, Hard wood, Soft wood, Coated boards, Plywood, Especially for curved cuts, For clean cuts Clearance angle ground, Teeth ground, Tapered BiM 57 1,4 mm T 101 AOF 5 6.23695 Especially for laminate, Laminated flooring, Hard wood, Soft wood, Coated boards, Plastics, 2-30 mm, For clean cuts Clearance angle ground, Teeth ground, Tapered BiM 74 1,7 mm T 101 AIF 5 6.23948 Especially for laminate, Laminated flooring, Kitchen worktops 3-30 mm, Coated boards, For clean cuts Clearance angle ground, Teeth ground, Reverse toothed BiM 74 2,5 mm T 101 BRF 5 6.23686 Hard wood, Soft wood, Coated boards, 4-60 mm Clearance angle ground, Teeth ground BiM 91 3,0 mm T 301 CDF 5 6.23696 Hard wood, Soft wood, Wood with nails, Non-ferrous metals, Plastics Ground BiM 90 2,5 mm T 111 HF 5 6.23949
FOR WOOD, "PIONEER" SERIES
WATER-/PUMP TECHNOLOGY COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards, For quick cuts

2,0-3,0 mm, progressiv

T 234 X

6.23675 6.23617

UNIVERSAL, "PIONEER" SERIES
Wood, Wood with nails, Metal, Non-ferrous metals, Plastics

Crossed, Milled

2,4-5,0 mm, progressiv

T 345 XF

6.23677 6.23621
FOR METAL, "CLASSIC" SERIES
Sheet steel, 0.5-1.5 mm, Non-ferrous metals

0,7 mm

T 118 G

6.23967 6.23636 6.23693

Sheet steel, 1-3 mm, Non-ferrous metals

1,2 mm

T 118 A
6.23965 6.23637 6.23692 6.23706
Sheet steel, 1-3 mm, Non-ferrous metals, Especially for curved cuts

T 218 A

6.23647
Hard wood, Soft wood, Chipboards, Glued woods 5-80 mm, Fibre glass reinforced plastics, 5-30 mm, For quick cuts

T 301 CLF

6.23977
Hard wood, Soft wood, Laminated flooring, Coated boards, Plastics, 3-30 mm, For clean cuts, Saw blade with insertion head

2,7 mm

T 101 BF

6.23975

Sheet steel, 1-3 mm, Non-ferrous metals, Saw blade with insertion head
1,1-1,5 mm/ 23-17 TPI/ progressiv

6.23924

Sheet steel, 1-3 mm, Non-ferrous metals, Especially for curved cuts, Saw blade with insertion head

6.23926

Sheet steel, 1-3 mm, Non-ferrous metals, sandwich materials

T 318 A

6.23629 6.23623 6.23716
Sheet steel, 2.5-6 mm, Non-ferrous metals

T 118 B

6.23638 6.23618 6.23707
Sheet steel, 2.5-6 mm, Non-ferrous metals, Saw blade with insertion head
1,9-2,3 mm/ 13-11 TPI/ progressiv

6.23925

T 318 B

6.23697

FOR METAL, "PROFESSIONAL" SERIES

T 118 AF

6.23971 6.23708

6.23950

Sheet steel, 1-3 mm, Sandwich materials 2-65 mm, Non-ferrous metals, Plexiglas

1,1 mm

T 318 AF

6.23978

Sheet steel, 2.5-6 mm, Sandwich materials 2-65 mm, Non-ferrous metals, Plexiglas

1,8 mm

T 318 BF

6.23979

Sheet steel, 1.mm, Especially for curved cuts

1,5 mm

T 118 EOF

6.23970

T 118 BF

6.23973

6.23929
Sheet steel, 2.5-6 mm, Sandwich materials 2-120 mm, Non-ferrous metals, Plexiglas

T 718 BF

6.23604
Sheet steel, 2-5 mm, Non-ferrous metals

T 118 EF

6.23972
Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. SAWS Milled, Crossed HSS 74 1,4 - 2,6 mm, progressiv T 123 X 6.23676 6.23620 SPECIAL-PURPOSE MACHINES COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY WOOD-PROCESSING TECHNOLOGY GARDEN SYSTEMATIC ORGANISATION Milled, Crossed HSS 74 3,0 mm T 127 D 100 6.23639 6.23622 6.23709 Milled, Crossed HSS 74 3,0 mm T 227 D 5 6.23648 Milled, Crossed BiM 75 3,0 mm T 127 DF 5 6.23974 Ground carbide 57 1,1 mm T 118 AHM 3 6.23662 Ground carbide 57 1,4 mm T 118 EHM 3 6.23663 Ground carbide 91 3,3 mm T 301 CHM 3 6.23687 Ground carbide 74 4,3 mm T 141 HM 1 6.23652 Ground carbide 106 4,3 mm T 341 HM 6.23688 6.23671 Clearance angle ground, HSS Teeth ground 74 2,0 mm T 101 A 5 6.23640 Knife-blade ground, Straight HCS 74 T 113 A 5 6.23641 Knife-blade ground, Crimped HCS 126 T 313 AW 3 6.23684 Coarse Carbide, coated 76 T 130 Riff 1 6.23657 Fine Carbide, coated 76 T 150 Riff 1 6.23658

FOR METAL, "PIONEER" SERIES
Sheet steel, 1.5-10 mm, Non-ferrous metals up to 30 mm
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium 3-15 mm, Non-ferrous metals 4 -20 mm, Plastics, For quick cuts
Aluminium 3-15 mm, Non-ferrous metals 4 -20 mm, Especially for curved cuts
FOR STAINLESS STEEL, "EXPERT" SERIES
Stainless steel sheets (Inox) 1-2 mm, Non-ferrous metals
Stainless steel sheets (Inox) 2-4 mm, Non-ferrous metals
FOR PLASTICS, "EXPERT" SERIES
Fibre glass reinforced plastics, Corian 4-60 mm
FOR GYPSUM CARTON/CEMENT MATERIALS, "EXPERT" SERIES
Gypsum plaster, Cement fibre boards 5-50 mm, Fibre glass reinforced plastics, 5-20 mm,
Gypsum plaster, Cement fibre boards 5-80 mm, Fibre glass reinforced plastics, 5-50 mm,
FOR PLEXIGLAS, "EXPERT" SERIES
Plexiglas, Polycarbonate 2-20 mm, Non-ferrous metals 2 -10 mm
FOR SOFT MATERIALS, "EXPERT" SERIES
Expanded polystyrene, Cardboard, Leather, Rubber, Carpet up to 50 mm
FOR CERAMIC MATERIALS, "EXPERT" SERIES
Ceramic, Glass, Fibre glass reinforced plastics, Cast iron
Jig saw blades with Fein shank Suitable for FEIN jig saws Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no.
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 10-40 mm

6.23992

Hard wood, Soft wood, Wood-core plywood, Fibre boards 10-40 mm

6.23993

Sheet steel, 0.5-1.5 mm

F 18 G

6.23996

Sheet steel, 1-3 mm

F 18 AF

6.23994

Sheet steel, 2.5-6 mm, Plastics

F 18 BF

6.23995
Aluminium, Non-ferrous metals 3-15 mm, Pipes up to 30 mm, Profiles up to 30 mm

F 127 DF

6.23997
Jig saw blades with universal shank Suitable for Black & Decker, Skil, Kress and others Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no.
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm, For clean cuts

U 111 C

6.23945
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm

U 144 D

6.23944
Hard wood, Soft wood, Plywood, Coated boards, 1.5-15 mm, Especially for curved cuts

1,3 mm

U 1 AO

6.23936

Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 10-45 mm, For clean cuts

U 101 B

6.23943

U 101 D

6.23942
Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no. SAWS 5 6.6.6.6.6.23941 WOOD-PROCESSING TECHNOLOGY COMPRESSED AIR SYSTEMS WELDING TECHNOLOGY WATER-/PUMP TECHNOLOGY 5 6.6.6.6.6.23939
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 5-50 mm, For quick cuts

U 144 DF

Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 3-30 mm, Coated boards, For clean cuts

U 101 BF

FOR WOOD AND METAL, "PIONEER" SERIES

2,4 - 5,0 mm, progressiv

U 345 XF

U 118 G

U 118 A

Sheet steel, 2.5-6 mm

U 118 B

U 118 AF

U 118 BF
Sheet steel, 1.5-10 mm, Pipes, Profiles up to 30 mm

1,2 - 2,6 mm, progressiv

U 123 X
Aluminium, Non-ferrous metals 3-15 mm, Pipes, Profiles up to 30 mm

U 127 D

Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 2-65 mm, For quick cuts

U 234 X

6.23903
Jig saw blades with Makita shank Suitable for Makita jigsaws Material suitability Version Material Usable length mm Tooth pitch Corresponds to Bosch type Packing unit Order no.
Soft wood, Plywood, Chipboards, Wood-core plywood, Fibre boards 3-15 mm, Especially for curved cuts

MA 119 HO 5

6.23958
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 4-50 mm, For rough cuts

MA 111 C

6.23955
Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 4-50 mm, For quick cuts

Ground, Milled

MA 144 CD 5

6.23919

MA 101 BC 5

6.23959

Hard wood, Soft wood, Chipboards, Wood-core plywood, Fibre boards 2-65 mm, For quick cuts, For clean cuts

progressiv, 2,0-3,0 mm

MA 234 X

6.23911

Wood, up to 65 mm, Wood with nails, Metal sheets, Pipes, Aluminium, Plastics, 3-10 mm

progressiv, 2,5-5,0 mm

MA 345 XF 5

6.23912

1,0 mm

MA 118 A

6.23957

Sheet steel, 2.5-6 mm,

MA 118 B

6.23956

MA 118 AF 5

Circular Sawing

370 | Circular Sawing | Circular Sawing Overview

Bosch Accessories 11/12

The right circular saw blade for any application
The top choice for a precise quality cut in all standard woodworking applications. Page 374
Ideal for fast rip and cross cuts in all types of wood. Page 376
The perfect blade for powerful cuts with clean cut edges in all different kinds of materials. Page 378
Circular Sawing | Circular Sawing Overview | 371
The complete range for any application
Optiline Wood Wood materials Softwood, fine cross cut Speedline Wood Multi Material
Softwood, coarse rip and cross cut Wooden beam

Hardwood, fine cross cut

Hardwood, coarse rip and cross cut Construction timber with nails and concrete residues Construction timber
Wood materials, composite materials

Formwork boards

Chipboard, raw
Chipboard, laminated or veneered on one side Chipboard, laminated or veneered on two sides Composite material
Pressed laminated wood, plywood Fiber materials, MDF

Wood core plywood

Laminate, parquet

Other materials

Aerated concrete

Plastics, epoxy

Non-ferrous metals, aluminium, brass, copper Pipes, profiles, bars
Sheet metals, angle iron, cable ducts Cutting features Clean cut

Fast cut

especially suitable

suitable

372 | Circular Sawing | Circular Sawing Overview
The right circular saw blade for any saw

Hand-held Circular Saws

Ou t dia er m mm ete r

Bo re i

AEG HK 40 HK 46N HK 55, K 55, K 55S, K 55SE HK 66, HK 66E, KS 66S HK 75A Atlas Copco TKS 42 K 55, K 55S K 66S, K 66SE, SCS 66Q HKS 75 HKS 85 Black & Decker BD 227, BD 840, BD 846, CD 600, DN 227, DN 227H, KS 40, KS 227, KS 840, KS 846, P 3601 BD 855, KS 855, SR 325E, U 336, U 975, U 976 HD 1200 BD 229, BD 865, BD 865E, DN 59, DN 229, DN 820, GD 60, HD 100, HD 1000, HD 2062, KS 865, KS 865E, P 3703, P 3705, PL 40, PS 3703, PS 3705, SR 300, SR 362E KS 64, KS 65K BD 365, PL 41 HD 2075S, KS 805, KS 810, P 3802 P 3902, HD 2066S Bosch PKS 38, PKS 40 PKS 46 GKS 54, GKS 54 CE, PKS 54, PKS 54 CE GKS 55, GKS 55 CE, GKS 160 GKS 65, GKS 68 BC, GKS 65 CE, PKS 66, GKS 66, GKS 66 CE GKS 75 S GKS 85 S PKS 14,4 V GKS 18 V, GKS 24 V GKS 36 V-LI DeWalt DW 351 DW 62, DW 62K DW 65, DW 365 DW 86 DW 935K, DW 936K DW 390KA, DW 007 Elu MH 151 MH 155 MH 65 MH 165, MH 265 MH 85, MH 286 GKS 24V GKS 36V-LI Evolution EVO 180, E180 Xtreme EVO 230

20 25.12.30

Festo AP 55, AP 55E, AP 55EB, ATF 55, ATF 55E, ATF 55EB AT 55E, AXT 50LA AU 55S, AU 60P AP 65, AP 65E, AP 65EB, AT 65, AT 65EB AU 65, AD 65 CS 70, CS 70EB AP 85, AP 85E, AP 85 EB Hitachi C 6BU, C 6U C 7BU, C 7U C 8U C 9U Holz-Her 2110, 2111, 2171

20 25.30

2260, 2270 2103, 2104, 2105, 2106, AP 55EB, ATF 55EB 2115, 2266, 2271, 2281 2112, HKU 55 2117, 2119, AP 65EB, AT 65EB 2118, 2120, Jepson 8219 Hand Dry Cutter 8230 Hand Dry Cutter Kress CHKS 6055 CHKS 6066, 1500KS Mafell KSP 55, KSP 55F, KST 55, MKS 55, MKS 55F, MS 55 KSP 65F, MKS 65 B 65 MKS 75 MKS 85 KSP 85, KSP 85F Makita 5603R, 5604R 5017RKB 5017R, 5703R, 5704R, 5705R 5900B, 5900BR, SR 2300 5903R Metabo KS 0852S KS 54, KSE 55 Plus KS 1155S, KS 1157S, KSTE 1357S KS 1266S, KS 1468S KS 66, KS 68 Plus KSE 1678S Skil 5140, 5240, 5740, 5750, 5855 5003, 5164 5066, 5166, 5266, 5366, 5466, 5566, 5766, 5866 5885

210 230

Circular Sawing | Circular Sawing Overview | 373

Miter Saws

Atlas Copco MS 3C Black & Decker SR 700, BD 800, DN 800, DN 810, SEC 818 Bosch PCM 8 S, PCM 8 ST GCM 8 S GCM 10, GCM 10 S, GKG 24 V, GCM 10 SD PCM 10, PCM 10 T GCM 12, GCM 12 SD, GTM 12 DeWalt DW 700, DW 701, DW 707 DW 702, DW 703, DW 710, DW 742, DW 743 DW 709, DW 711 DW 704, DW 705, DW 706, DW 708 DW 872 Einhell KGS 210 KGTN 245, KGTN 250 Elu PS 174, PS 274, PS 274E, ETS 41 TGS 170, TGS 171, TGS 172, TGS 173, TGS 271, TGS 273 PS 374, EMS 705 Evolution 355 Raptor Flex TCS 3602 Hitachi C 8FA C 8FC, C 8FS C 10FCA, C 10FCB CD12F CD14F * A circular saw blade with 250 mm outer diameter also fits these machines.
254* 30 25.4 25.25.25.254* 30 25.30 254* 30
Holz-Her 2161, 214101 Symstric Jepson 9211D Dry Miter Cutter 9430 Premium Dry Cutter 9435 Premium Super Dry Cutter 9515 Cut-Off Saw Kress GST 90 Makita LS 1013, LS 1040 LC 1230 Metabo, Elektra-Beckum GKSE 16705, Signal, KGSE 1670S KGS 255, P 200, PK 200, UK 220E, UK 220W KGS 250, KGS 300, KGT 500, KGT 550, KGS 330, KGS 250 Hobbymaster, KGS 301, KGS 303, KGS 331 KS 304 Metallkraft MTS 500 MTS 355 Ridgid 590 590L Rexon MS 8RAL, SM 2151AL M 2500AL SCM 12A Scheppach Capas 1, Capas 2 KG 260E, TKG 260i, TKG 260E, TKG 280E TKG 305i Capas 3 Stayer SLL 250, SCE 1600, SC 270, SC 271, SLL 250E, SLL 251, SL 251E
355 254* 254* 254* 254* 300 305
30 25.4 25.4 25.4 25.30 25.30 25.4 25.4 25.4 25.30 30

Table Saws

Bosch GTS 10, PTS 10, PTS 10 T GTM 12 DeWalt DW 744, DW 746 Einhell BKS 315 Metabo, Elektra-Beckum TKHS 315, TKHS 315C

254* 30

Rexon BT 2160A BT 2500AE TS 3150A Scheppach TKU, TS 315GT, TS 401 ci BS 400 BS 500
* A circular saw blade with 250 mm outer diameter also fits these machines. Bosch does not accept any responsibility for the validity and correctness of competitor data
374 | Circular Sawing | Optiline Wood
Optiline Wood Top performance in wood
When it comes to lifetime, cutting speed and accuracy, the Optiline Wood is hard to beat. It is ideal for precise quality cuts in all standard woodworking applications, both in interior working and on the construction site. Soft, hard, pressed and laminated wood as well as chipboard, wood core plywood and MDF boards are cut with exact precision. Alternate top bevel teeth made of high-quality tungsten carbide guarantee these impressive cutting results. Optiline Wood circular saw blades are available for hand-held circular saws, for miter saws and for table saws.

Base blade Dimensionally stable SK5 steel, hardened (>40 HRC)
Tungsten carbide teeth Clean cuts thanks to high-quality tungsten carbide and precise grinding TKS Body and expansion slots Lower vibration, dampen noise and reduce heat NL development
TKS: Pitch circle NL: Pin hole
Available in sizes: diameter 130 to 450 mm
Very coarse cut Fast rip cuts and cross cuts in softwood, hardwood, raw chipboards and formwork boards. Coarse cut Rip and cross cuts in softwood, hardwood, raw chipboards, formwork boards and plywood.
Fine cut Cross cuts in softwood, hardwood, plywood, wood core plywood, chipboards laminated on one side, and parquet. Very fine cut Cross cuts in softwood, hardwood, plywood, wood core plywood, parquet, fiber materials and MDF.
Circular Sawing | Optiline Wood | 375
Optiline Wood for hand-held circular saws
The precise blade for quality cuts in all types of wood
b1: width of cut b2: base blade thickness
Bo r rin e wi g m th m red W uc idt tio Ba h o n se f c (b bl ut 2) ad mm e t (b1) hic m kn m / es s Nu mb er of tee th Cu tti ng res ult

me ter m

or de rq

ua nt sh a ua n ing um

dia m
Product properties 16.0 1.8/1.2 16.0 1.8/1.2 16.0 2.6/1.6 - 2.6/1.6 - 2.6/1.6 - 2.6/1.6 - 2.6/1.6 - 2.8/1.8 - 2.8/1.8 - 2.8/1.8 - 3.2/2.2 - 3.2/2.60
Ordering information ATB ATB ATB ATB ATB ATB ATB ATB ATB ATB ATB ATB 6/32 6/32 6/32 7/42 7/42 7/42 7/42 7/42 7/42 7/171* 641 172* C1a C1a C1a C1a C1a C1a C1a C1a C1a C1a C1a C1a 195027 195034
Optiline Wood for miter saws
Bo re mm W idt Ba h o s f (b e bl cut 2) ad mm e t (b1) hic m kn m / es s Nu mb er of tee th Cu tti ng res ult

nu mb e

nt ing nim um sh ua
Product properties 2.8/1.8 2.0/1.4 2.0/1.4 2.0/1.4 2.5/1.8 2.5/1.8 2.8/1.8 2.8/1.8 2.5/1.8 2.5/1.60
* For an extra-thin cut with the minimum exertion of force. Also especially suitable for cordless circular saws. Pack quantity (Pieces per pack) Minimum order quantity. The minimum order quantity is a fixed quantity of packs. Orders are carried out only in multiples of the minimum order quantity.
Ordering information ATB/N ATB ATB/N ATB/N ATB ATB/N ATB ATB ATB/N ATB/N 640 438* 640 435* 640 436* 640 440* 640 441* C1a C1a C1a C1a C1a C1a C1a C1a C1a C1a 317382 317399

Ba r 31 code 0

/d iam

To oth

Bo re m

Ou ter

376 | Circular Sawing | Speedline Wood
Speedline Wood Fast in all types of wood
The Speedline Wood is the ideal blade for fast rip and cross cuts in all types of wood. Both coarse cuts in wood or board materials and precise angled cuts can be quickly mastered. The special tooth design ensures a controlled and virtually vibration-free cut. Speedline Wood circular saw blades are available for hand-held circular saws and for table saws.

Base blade Dimensionally stable steel, hardened (>40 HRC)
Tungsten carbide teeth FZ/WZ: special tooth design, two positive concave alternate top bevel teeth and one concave flat tooth ATB: alternate top bevel teeth with positive hook angle TKS
Body and expansion slots NL Lower vibration, dampen noise and reduce heat development
Available in sizes: diameter 130 to 500 mm
Very coarse cut Fast rip cuts and cross cuts in softwood, hardwood, raw chipboards, formwork boards.
Coarse cut Rip cuts and cross cuts in softwood, hardwood, raw chipboards, formwork boards and also wood core plywood.
Circular Sawing | Speedline Wood | 377
Speedline Wood for hand-held circular saws
The fast blade for cuts along and across all types of wood

FZ/ WZ

nc h Bo r rin e wi g m th m red W uc idt tio Ba h o n s f (b e bl cut 2) ad (b mm e t 1) hic m kn m / es s Nu mb er of tee th Cu tti ng res ult
Product properties 230 16.0 16.0 16.0 20.0 16.0 20.0 30.0 30.0 30.0 - 2.2/1.4 - 2.4/1.6 - 2.4/1.6 - 2.4/1.6 - 2.4/1.2.6/1.6 - 2.6/1.8 - 2.6/1.8 - 2.6/1.18 18
Ordering information FZ/WZ FZ/WZ FZ/WZ FZ/WZ FZ/WZ FZ/WZ FZ/WZ FZ/WZ FZ/WZ C1a C1a C1a C1a C1a C1a C1a C1a C1a 240154
Pack quantity (Pieces per pack)
Minimum order quantity. The minimum order quantity is a fixed quantity of packs. Orders are carried out only in multiples of the minimum order quantity.
378 | Circular Sawing | Multi Material
Multi Material Clean cuts through different materials
Just one circular saw blade for all applications. The Multi Material is the perfect blade for interior working or exhibition fitting. Alternate trapezoidal and flat teeth made of tungsten carbide ensure a powerful cut with clean cut edges in all different kinds of materials. Multi Material circular saw blades are available for hand-held circular saws, for miter saws and for table saws.
Body and expansion slots Lower vibration, dampen noise and reduce heat development
Tungsten carbide teeth Clean cuts thanks to high-quality tungsten carbide and precise grinding
Available in sizes: diameter 130 to 400 mm
Fine cut in hardwood Also well suited to occasional cutting of composite materials, chipboards laminated on one and two sides, plywood, fiber materials, MDF and wood core plywood.

Fine cut in plastic and non-ferrous metals Also well suited to cutting parquet, laminate, epoxy and occasional use in hardwood.
Very fine cut in hardwood and composite materials Also well suited to occasional cutting of plastic and non-ferrous metals such as aluminium, brass and copper.
Very fine cut in plastic and non-ferrous metals Perfectly suited to cutting parquet, laminate, epoxy, fiberglass and cement-bonded fiber boards.
Circular Sawing | Multi Material | 379
Multi Material for hand-held circular saws
The perfect blade for powerful cuts with clean cut edges in all different kinds of materials Use universal cutting oil to increase lifetime several times over when cutting metal, e.g. aluminium
Bo r rin e wi g m th m red uc W tio idt n Ba h o se f c (b bl ut 2) ad (b mm e t 1) hic m kn m / es s Nu mb er of tee th Cu tti ng res ult

me ter

tit sh a ua n ing um

y dia m Ou Bo

Product properties 16.0 2.4/1.8 2.4/1.8 2.4/1.8 2.4/1.8 2.4/1.8 2.4/1.64
Ordering information HLTCG HLTCG HLTCG HLTCG HLTCG HLTCG C1a C1a C1a C1a C1a C1a 193016 193030
Multi Material for miter saws and table saws
Use universal cutting oil to increase lifetime several times over when cutting metal, e.g. aluminium
m W id / B th o f a (b se b cut 2) mmlade (b1) th mm ick ne ss Nu mb er of tee th

nt ing nim um ua

Product properties 2.4/1.8 2.5/1.8 2.5/1.60 80
Ordering information HLTCG HLTCG HLTCG C1a C1a C1a 317450
380 | Circular Sawing | Multi Material
m W id / B th o f a (b se b cut 2) mmlade (b1) th mm ick ne ss Nu mb er of tee th ity ete rT KS res ult sh ap e gt nu mb ua nt or de rq yp e er ity ua nt iam ete rm m Ou ter d Bo re m
Product properties 3.2/2.5 3.2/2.5 3.2/2.5 3.2/2.5 3.2/2.5 3.2/2.96
Ordering information HLTCG HLTCG HLTCG HLTCG HLTCG HLTCG 7/453 C1a C1a C1a C1a C1a C1a 317504 317511

Ba r 31 code 0.

Pa ck ag in

Cu tti

Pa ck q
Circular Sawing | Accessories | 381
Accessories for circular saws
Reduction rings for circular saw blades
ity ete rm es sm gt nu mb ua nt or de rq m yp e er ity m ua nt

Product properties

Ordering information
Reduction rings for circular saw blades Base blade thickness of 1.4 mm up to max. 1.7 mm
20.0 25.0 25.4 30.0 30.0 30.25.4 1.2 1.2 1.2 1.2 1.2 1.211 P1b P1b P1b P1b P1b P1b 433761 433778
Reduction rings for circular saw blades Base blade thickness of 2.2 mm up to max. 3.0 mm
30.0 30.25 1.8 1.231 P1b P1b 433952 433976
Accessories for hand-held circular saws
ity e be ua nt mm or de typ ity r rq
Parallel guide Appropriate for GKS 55; GKS 65; GKS 66 CE; GKS 75 S; GKS 85; GKS 85 S, GKS 160 Professional

PC1c 019033

Guide rail FSN 70 Pair of G-clamps not included Appropriate for GKS 18 V; GKS 24 V; GKS 55; GKS 55 CE; GKS 65; GKS 65 CE; GKS 66 CE; GKS 68 B; GKS 68 BC; GKS 85; GMF 1400 CE; GOF 900 CE; GOF 1300 CE; GOF 2000 CE; GUF 4-22 A Professional; PKS 40; PKS 54; PKS 54 CE; PKS 66; PKS 66 CE; POF 1200 AE; POF 1400 ACE

030 C0a 087186

Guide rail FSN 140 Pair of G-clamps not included (rubber lip as spare part 010 044) Appropriate for GKS 18 V; GKS 24 V; GKS 55; GKS 55 CE; GKS 65; GKS 65 CE; GKS 66 CE; GKS 68 B; GKS 68 BC; GKS 85; GMF 1400 CE; GOF 900 CE; GOF 1300 CE; GOF 2000 CE; GUF 4-22 A Professional; PKS 40; PKS 54; PKS 54 CE; PKS 66; PKS 66 CE; POF 1200 AE; POF 1400 ACE

031 C0a 087193

Le ng th

Pa ck ag

Th ick n
382 | Circular Sawing | Accessories
ity gt nu mb ua nt mm or de rq yp e er ity ua nt
Connector for guide rails FSN 70, FSN 140

P0b 024181

Pair of G-clamps for FSN 70, FSN 140

P0b 509268

Glide shoe for guide rail Glide shoe not appropriate for GKS 55 (664 0.); GKS 55 CE (664 7.); GKS 65 (667 0.); GKS 65 CE Professional (668 7.) Appropriate for GKS 55 (567 1.); GKS 65 (568 1.); GKS 66 CE Professional (568 7.)

PC1c 019590

Adapter for guide rail Appropriate for GKS 18 V; GKS 24 V; GKS 54 C; GKS 54 CE; GKS 55; GKS 55 CE; GKS 65; GKS 65 CE; GKS 66 C; GKS 85; GKS 160 Professional; PKS 14 V; PKS 40; PKS 46; PKS 54; PKS 54 CE; PKS 55; PKS 65; PKS 66; PKS 66 CE

C0a 229852

Accessories for benchtop circular saws
Vertical quick-action holder Appropriate for GCM 8 S; GCM 10; GCM 10 S; GCM 10 SD; GCM 12; GCM 12 SD; GKG 24 V; GTM 12 Professional

C0a 274043

Insert plate Appropriate for GCM 10; GKG 24 V Professional

P0b 274050

Insert plate Appropriate for GCM 10 S Professional

P0b 317238

Push stick Appropriate for GTS 10 Professional

P1b 316361

2-piece table extension Appropriate for GCM 10; GCM 10 S; GCM 12; GKG 24 V; GTM 12 Professional; PCM 10

911 C0a 316187

Circular Sawing | Accessories | 383
Dust extraction adapter Appropriate for GCM 10 S Professional

P0b 316316

Dust bag Appropriate for GCM 8 S; GTM 12 Professional; PCM 8 S

P1d 422529

Dust extraction adapter Appropriate for GCM 10; GKG 24 V Professional

P0b 274074

Dust bag Appropriate for GCM 10 S; GCM 12 Professional

P0b 316231

Dust bag Appropriate for GCM 10; GKG 24 V Professional

P0b 274067

Dust bag with adapter Appropriate for GCM 10 SD Professional

P0b 334822

Dust bag with adapter Appropriate for GCM 12 SD Professional

P0b 334815

Dust bag Appropriate for GTS 10 Professional

P0b 316248