System Flash Units
m e c a b l i t z AF - 1 d igi ta l

For the ambitious

Best flash unit in Europe 2007/2008* Experts from 50 different trade journals from 18 European countries awarded this coveted prize to the Metz mecablitz 58 AF-1 digital in the Photo Accessories category. The innovative high-performance unit was the first flash equipped with a USB port. It can be used to conveniently update the specific firmware of each variation of the model via the computer and Internet. It looks sleek, adjusts the flash exposure with every trick in the book, is intuitive to use and tremendously powerful. Equipped with innovative developments, the Metz mecablitz 58 AF-1 digital provides state-of-the-art secondary reflector technology, high-performance power management, multi-zone AF measuring flash, and a fully swiveling reflector system. The new top Metz model transmits all cameraspecific system flash modes from Canon, Nikon, Pentax/Samsung, Olympus/Panasonic or Sony Alpha cameras (as of 03/2008), including the respective wireless TTL mode. Due to its high guide number, the 58 AF-1 digital is not only especially powerful, but is also outstanding for bounce flash use. For its vertical as well as horizontal rotating and swiveling reflector, Metz integrated an extendible reflector card for the first time. Additional brilliance can be obtained for the close-up range via the integrated, system-controlled, secondary reflector for bounce flash.

Flash output

high max. GN of 58 for ISO 100/21 and 105 mm

Basic configuration

secondary reflector with 3 light output ratios vertical (-7/+90) and horizontal (300) swivel reflector easy operating concept illuminable dot-matrix display motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 18 mm illumination reflector card that can be flipped open for soft flash illumination modeling light (permanent light for checking the photo) integrated autofocus multi-zone measuring flash flash readiness and exposure control indicators on the unit and camera flash range indicator automatic unit switch-off and manual key lock

high max. GN of 48 for ISO 100/21 and 105 mm
vertical (-7/+90) and horizontal (300) swivel reflector illuminable LCD display easy operating concept motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 18 mm illumination extendible reflector card for soft flash illumination modeling light (permanent light for checking the photo) integrated autofocus measuring flash flash readiness and exposure control indicators on the unit and camera flash range indicator in the LCD display automatic unit switch-off and manual key lock
TTL flash mode manual flash mode with 8 partial lighting levels HSS high speed synchronization 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL flash mode automatic fill-in flash flash bracketing

USB por t

GN of 48 at ISO 100/21 (105 mm) GN of 35 at ISO 100/21 (50 mm)
E-TTL- / E-TTL-II flash mode E-TTL remote mode (slave operation)

Nikon/Fujifilm Version

i-TTL / D-TTL / 3D flash mode i-TTL remote mode (slave operation)
Olympus/Panasonic/Leica Version
Four Thirds TTL flash mode Four Thirds TTL remote mode (slave operation)

Pentax/Samsung Version

P-TTL flash mode P-TTL remote mode (slave operation)
ADI flash mode ADI remote mode (slave operation)
Guaranteed in the future Power sources
4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries
Firmware update via integrated USB port
m e c a b l i t z AF - 4 d igi ta l

For demanding beginners

The compact class Presenting the Metz mecablitz 36 AF-4C digital for Canon, 36 AF-4N digital for Nikon, 36 AF-4O digital for Olympus and Panasonic, 36 AF-4P for Pentax / Samsung and 36 AF-4S for Sony Alpha, in the smart Cobra design. With these sophisticated entry-level models Metz has just the right flash solution for these digital camera user groups. In addition, they are impressive because of their likeably easy operation. Even bounce flash becomes childs play, due to the vertically-tilting reflector. The manually-adjustable zoom reflector has other advantages. By adjusting the reflector to different focal lengths, the illumination angle of the 36 AF-4 digital can be optimally utilized.
max. GN of 36 for ISO 100/21 and 85 mm
vertically tilting reflector +90 LED displays manual zoom reflector for 28 - 85 mm illumination integrated autofocus measurement flash flash readiness and exposure control indicators on the unit and camera

high max. GN of 54 for ISO 100/21 and 105 mm
SCA adapter system (flash unit useable with different cameras) secondary reflector vertical (-7/+90) and horizontal (270) tilt reflector illuminable LCD display easy operating concept motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 20 mm illumination modeling light (permanent light for checking the photo) integrated autofocus measurement flash flash readiness and exposure control indicators on the unit and camera flash range indicator in LCD automatic unit switch-off and manual key lock

Standard Flash Modes

TTL flash mode automatic flash mode with 12 automatic apertures manual flash mode with 25 partial lighting levels stroboscope mode HSS high speed synchronization (Canon, Sony, Nikon analog, Leica) 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL or automatic flash mode automatic fill-in flash flash bracketing
Secondar y reflector with attachable reduction filter
2 function keys, 1 control dial
GN of 54 at ISO 100/21 (105 mm) GN of 40 at ISO 100/21 (50 mm)
ADI flash mode ADI remote mode (slave function)
4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries powerful Metz NiMH Power Pack P 76 with V 54-50 cable
Light reduction filter Bag Standard foot
Power Pack P 76 (V 54-50 connection cable required)
Connecting cable SCA 3008A with SCA 3002 adapters and camera bracket 40-36
SCA 3083 digital slave adapter
Mecabounce 44-90 for softer illumination
m e c a b l i t z M Z - 2 d igi ta l
Variable entry-level model: In conjunction with the respective SCA adapter, the mecablitz 44 MZ-2 digital can be used with almost any analog SLR camera as well as with digital cameras from Nikon and Olympus/Panasonic (Four Thirds standard). The powerful motor zoom compact flash model (GN 44) with the large light angle of 28-105 mm can be used either in TTL, automatic, or manual flash mode and is distinguished by the interesting special functions. For example, its strengths include the Nikon i-TTL flash mode, which makes fill-in flash possible in daylight to effectively brighten far too dark shadowy areas, second curtain synchronization (important to enable more natural blurring effects) and much more. In addition, the 44 MZ-2 digital supports the special flash functions for cameras from Hasselblad, Mamiya, Rollei, and Leica.
max. GN of 44 for ISO 100/21 and 105 mm
SCA adapter system (flash unit useable with different cameras) vertical (-7/+90) tilt reflector illuminable LCD display motor zoom for 28 - 105 mm illumination integrated autofocus measurement flash flash readiness and exposure control indicators on the unit and camera flash range indicator in LCD automatic unit switch-off

TTL flash mode automatic flash mode with 12 automatic apertures manual flash mode with 8 partial lighting levels 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL or automatic flash mode automatic fill-in flash
GN of 44 at ISO 100/21 (105 mm) GN of 34 at ISO 100/21 (50 mm)
NIKON FUJIfilm HASSELBLAD LEICA MAMIYA OLYMPUS PANASONIC ROLLEI
Four Thirds TTL flash mode Firmware update possible via Metz Service (flash unit and SCA adapter)

Included with delivery

Standard foot

SCA 300 or 3002 adapter

SCA 3008A connecting cable with SCA 3002 adapters and camera bracket 40-36
A u t o m at ic f l a s h u n i t s
The flash units in this family dont have TTL flash mode; instead, they have the so-called automatic flash mode, in addition to manual flash mode. Numerous photographers still make use of this simple but extremely effective form of flash measurement. With automatic flash mode, it isnt the camera that controls the flash, but instead, the photocell integrated in the flash measures the light reflected from the object. It is a really nice thing!

Fill-in flash

Backlighting makes interesting light effects possible, if you know how to use it correctly. A flash should be used in any case. With the flash output reduced by 1 or 2 f-stops, it is possible to retain the character of the existing light. The higher the guide number, the greater the range of the flash unit. However, when comparing, it is important to make sure that the same focal length and the same ISO specification are used.

Long exposure times

It is worth experimenting with exposure times that are longer than the flash sync speed. For moving objects, interesting blurring effects and a corresponding brightening of the foreground can be obtained in a range of approx. 1 second. By the way, the easiest way to extend the range of a flash unit is to increase the ISO setting on the camera. If you use ISO 1600 instead of ISO 100, then the sensitivity of the photo chip increases is quadrupled.

mecablitz 45 CL-1

For purists
Simply a powerful light: The powerful Metz handheld flashgun family begins with the robust Metz mecablitz 45 CL-1. It offers a fully swiveling and tilting reflector, high light output with easy handling and is reduced down to the essentials. There is a choice of 5 automatic apertures. Mainly intended for the owners of analog cameras, even professional photographers with modern DSLR cameras swear by the automatic flash mode of the 45 CL-1. Thanks to the included modern NiMH rechargeable battery, it is possible to have a high number of flashes with low recycling times. In order to be able to fall back on maximum flash power when taking a series of shots, the practical, highpower Power Pack P 76, which attaches to your belt, can be used in connection with the optionally available V 45 cable.

Slave mode at close range: The Metz macro flash is attached directly onto the lens, thus enabling precise and creative lighting in the macro range. In addition to which the Metz mecablitz 15 MS-1 digital can also be used in its slave function for effectively brightening up dark areas of the picture.

Creative at close range:

Correct lighting is of particular importance in the macro range. The Metz macro flash 15 MS-1 digital is especially suited for this. Due to its positioning directly on the lens the light cannot fail to reach its destination. With its ring form and completely wireless functionality, the new Metz flash unit is excitingly attractive. Special light accents and a variety of lighting options are also possible thanks to adjustable reflectors. Thus, directed light can be adjusted in terms of contrast and brightness. In the slave mode, the Metz mecablitz 15 MS-1 can also be used to effectively lighten shadowed areas of pictures.
m e c a b l i t z C s - 2 d igi ta l

For the imaginative

Flash with a fun factor: Have you ever been upset due to photographs that are too dark, because the integrated flash in your camera was once again inadequate? Wouldnt you like to have a handy flash unit that can also be used separate from the camera once in a while? Then Metz has the perfect solution for you! Let the curtain rise for the Metz mecablitz 28 CS-2 digital, with technology and a size that have been optimally matched to compact digital cameras. The fun factor comes from the self-learning slave mode and the clever EASY mode. For the first time, flash results can be affected directly by means of the immediate correct buttons (+/-). This means you only have to take the shot check the results on the cameras monitor and readjust using the buttons if necessary. With this slave model, you increase the flash power absolutely without any undesired side effects. This is because it draws its energy either from alkaline micro batteries, which are available everywhere, or from equally economical rechargeable Micro batteries.
max. GN of 28 for ISO 100/21 and 85 mm
Slave mode: flash unit triggered by the integrated camera flash or by another external flash unit LCD display flash readiness and exposure control indicator on the unit flash range indicator in the LCD illumination from 24 mm (wide-angle diffuser) up to 85 mm (telephoto attachment) automatic unit switch-off

Regarding your type of camera, also take note the SCA packaging imprint and the M version of the adapter. For current versions of the flash units or alternatively the adapters, see www.metz.de.

45 CL-4 digital Basic

45 CL-4 digital kit inCl. SCA 3045

76 MZ-5 digital

58 AF-1C 58 AF-1C 58 AF-1C
SCA 3102 SCA 3102 SCA 3102
48 AF-1C 48 AF-1C 48 AF-1C

SCA 3102

36 AF-4C 36 AF-4C 36 AF-4C
58 AF-1N 58 AF-1N 58 AF-1N 58 AF-1N 58 AF-1N
SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402
48 AF-1N 48 AF-1N 48 AF-1N 48 AF-1N 48 AF-1N
SCA 3402 SCA 3402 SCA 3402 SCA 3402
36 AF-4N 36 AF-4N 36 AF-4N

SCA 300A + SCA 301

58 AF-1N 58 AF-1N

301 SCA 3402 SCA 3402

48 AF-1N 48 AF-1N

301 SCA 3402

36 C-AF-4N

20 C-2

SCA 390 + 40-36 SCA 3902

SCA 300A + SCA 301

58 AF-1O

SCA 351 SCA SCA 3202

48 AF-1O

36 AF-4O

20 C-2
SCA 396 + SCA 300 E + 40-36 SCA 3952

58 AF-1O

SCA 3202

48 AF-1O

36 AF-4O

58 AF-1O

301 SCA 3502 SCA 3202

48 AF-1O

36 C-AF-4O

58 AF-1P

SCA 3702

48 AF-1P

36 AF-4P

58 AF-1P

SCA 356 + SCA 300 D SCA 3562 SCA 3702

48 AF-1P

SCA 356 + SCA 300 D SCA 3562

36 AF-4P

SCA 3302

48 AF-1S

36 AF-4S
28 CS-2 DIGITAL is suitable for compact cameras of all brands with an integrated flash
* The following operating modes are available, depending on camera configuration: - Remote TTL slave - Slave with or without pre-flash suppression - Manual mode via sync cable Please follow the operating instructions. Consult www.metz.de for more information

15 MS-1 Digital*

54 MZ-4i digital

58 AF-1 digital

48 AF-1 digital

36 AF-4/36C-2

44 MZ-2

45 CL-1

20 C-2

44 MZ-2 digital

36 C-2

Configuration features: Flash output GN for ISO 100 and 35 mm or 50 mm GN for ISO 100 and max. zoom Basic configuration Adapter system SCA 300 Adapter system SCA 3002 Illumination from. mm (KB format) Motor zoom main reflector Manual zoom main reflector Extended zoom mode for main reflector Main reflector can be tilted and rotated Vertical tilting range in Horizontal swiveling range in Integrated wide-angle diffuser for illumination in mm (KB format) Attachable wide-angle / telephoto / bounce diffuser lens cover Integrated reflector card for main reflector Secondary reflector / partial lighting levels (manually adjustable) Secondary reflector support for system flash functions Dot matrix display / illuminated LCD display / illuminated LED displays Range display Flash readiness indicator / exposure control indicator on the flash unit Acoustic status messages (beep) Modelling light function Manual key lock (KEYLOCK) Automatic unit switch-off (auto off) Wake-up function by the camera Automatic AF measurement flash / multi-zone AF measurement flash AF auxiliary light Metz remote flash mode (master/slave) Master flash mode (Metz remote) Slave flash mode (Metz remote) Standard flash modes TTL flash mode (without pre-flash) Automatic flash mode EASY Mode flash mode f-stops for automatic flash mode Manual flash mode Partial lighting levels Slave flash mode (pre-flash technique / learning function) Stroboscope flash mode System flash functions Automatic fill-in flash Flash-ready indication in camera viewfinder Exposure control indication in camera viewfinder 1st and 2nd shutter curtain synchronization High-speed synchronization (HSS or FP) Manual flash exposure correction Manual flash bracketing Pre-flash function against the red eye effect

20 / +90 270

35 / +90 /

T e c h n ic a l d ata

20 / 270 20

18 / 300 18

28 / +90

/ / +90 / 20

/ +90 360

/ 300 18

7. +90 7. +90 7. +90 7. +90

// // //

/2 / / / / / / 25

4) 2) 1)

/ / / / /

/ / /

/ / / /

/ / /

25 /

12 12

15 MS-1 Digital

28 CS-2 digital

36 AF-4 digital
45 CL-4 digital BASIC / KIT
Configuration features: System-Blitzbetriebsarten Cannon E-TTL- / E-TTL-II flash mode Canon FE flash exposure memory for E-TTL and E-TTL-II flash mode Canon E-TTL remote flash system as master/controller/slave Leica group number control (GNC) Nikon 3D multi-sensor fill-in flash mode Nikon D-TTL / 3D flash mode
Nikon FV flash exposure memory for i-TTL and i-TTL-BL flash mode

/ / /

/ / /

/ /

/ /
Nikon i-TTL / i-TTL-BL flash mode Nikon matrix controlled fill-in flash mode Nikon underexposure warning in EV (f-stops) Nikon i-TTL remote flash system as master/controller/slave Olympus TTL flash mode with measurement pre-flash technique Olympus/Panasonic/Leica Four Thirds System (TTL compatible)
Olympus Four Thirds system TTL remote flash system as master/controller/slave
Pentax/Samsung contrast control Pentax/Samsung P-TTL flash mode Pentax Spot-beam mode Pentax/Samsung P-TTL remote flash system as master/controller/slave Sony DSLR-ADI flash control Sony DSLR multi-zone flash measurement (TTL pre-flash measurement) Sony DSLR remote flash system as master/controller/slave Guaranteed in the future Firmware update via Metz Service Firmware update via USB port Power supply Runs on alkaline-magnesium batteries (1.5 V)
Runs on NiCad rechargeable batteries or NiMH rechargeable batteries (1.2 V)

430

0,1/6 0,1/5 0,1/10 0,1/4 0,1/4 0,1/4
Runs on lithium batteries (1.5 V) Runs on Metz NiMH rechargeable battery pack External energy supply with Metz Power Pack P 76 Number of flashes (at full light output) Running on alkaline-magnesium batteries (1.5 V) Running on NiCd rechargeable batteries (1.2 V/600 mAh) Running on NiMH rechargeable batteries (1.2 V/1600 mAh) Running on lithium batteries (1.5 V) Running on Metz NiMH rechargeable battery pack (1600 mAh) External energy supply with Metz Power Pack P 76 Flash cycle time in sec. (min./max.) Running on alkaline-magnesium batteries (1.5 V)
Running on NiCd rechargeable batteries or NiMH rechargeable batteries (1.2 V) 0,1/4 0,3/11

250 460

205 370
100 5) 35 5) 140 5) 175 5)
140 5) 150 5) 200 5) 250 5)

160 350

200 400

130 430

0,1/5 0,1/5 0,1/6

0,2/5 0,2/4 0,2/6

0,3/5 0,3/5 0,3/5

0,3/8 0,3/6 0,3/6

0,3/10 0,3/8 0,3/8

0,3/4 0,3/4 0,3/5

Running on lithium batteries (1.5 V) Running on Metz NiMH rechargeable battery pack External energy supply with Metz Power Pack P 76 Size and weight Weight without power source in g (approx.) W Approx. dimensions in mm (W x H x D) H D Lamp pole Control section Lamp pole Control section Lamp pole Control section Lamp pole Control section 147 102
0,1/4 0,1/4 0,3/7 0,3/2,5 0,1/3

0,1/2,5 0,1/2,5

148 99

125 108

137 99

115 95

110 87

140 75,32,5

144 38
1) With connecting cable SCA 3045 2) With slave adapter SCA 3083 digital and connecting cable SCA 3045 3) With battery case 45-39 4) With slave adapter SCA 3083 digital 5) Running on micro-cells (AAA): NiCd (250 mAh), NiMH (1000 mAh)

54 MZ-4i

45 CL-4 digital BASIC

45 CL-4 digital KIT

Acc e s s o r i e s
Rechargeable batteries and battery case NiMH rechargeable batteries 45-56 NiMH rechargeable batteries 76-56 Battery basket without batteries 45-39 Charging sets and chargers NiMH charger set B 46 NiMH charger set B 47 Power packs and accessories Power Pack P 76 Set (incl. charger) Connecting cable V 76 (for P 50 / P 76) Connecting cable V 58-50 (for P 50 / P 76) Connecting cable V 54-50 (for P 50 / P 76) Connecting cable V 50 (for P 50 / P 76) mecabounce mecabounce 44-90 mecabounce 50-90 mecabounce 45-90 mecabounce 58-90 Sync cables Standard sync cable 15-50 Spiral sync cable 36-52 Spiral sync cable 45-49 Standard sync cable 36-50 (25 cm) Standard sync cable 45-47 (40cm) Standard sync cable 45-48 (100cm) Camera brackets and accessories Camera bracket 40-36 Camera bracket 32-38 Bracket adapter 60-28 Mounting bracket for control unit 50-35 Bracket plate for medium format 70-35

1) 1)

1) 1)

36 AF-3/36 AF-4

Bounce diffusers Bounce diffuser 54-23 (or 58-23) Bounce diffuser 76-23 mecalux mecalux 11 Camera straps Camera straps 50-31 Wrist strap Wrist strap 45-27 Connecting cable SCA 3008 A for SCA 3002 adapter SCA 307 A for SCA 300 adapter SCA 3045 for SCA 300/3002 adapter SCA 300 A for SCA 300 adapter Adapters SCA 356 for Rollei 4) SCA 390 for Hasselblad 4) SCA 3102 for Canon SCA 3202 for Olympus / Panasonic / Leica SCA 3302 for Konica Minolta / Sony SCA 3402 for Nikon SCA 3502 for Leica SCA 3562 for Rollei 4) SCA 3702 for Pentax / Samsung SCA 3902 for Hasselblad 4) SCA 3952 for Mamiya 4) SCA 3083 digital slave adapter SCA 300 E Standard foot 301 Lens adapter rings 62mm adapter ring 67mm adapter ring 72mm adapter ring

5) 5) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)
5) 5) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 5)

1) = Standard foot 301 required 2) = SCA 3045 required 3) = SCA 300 D required 4) Can be obtained from the reseller partners of the camera manufacturer 5) = SCA 300 A or SCA 3045 required
TE C HN I C AL G LOSSAR Y
A ADI Modern further development of the TTL flash control for Sony Alpha and Konica-Minolta cameras in which, for example, the data for distance to the subject must be put into the flash exposure in addition. AF measurement flash An autofocus auxiliary light (AF measurement flash) integrated in the flash unit automatically supports the central autofocus sensor of the camera in the event of low ambient light. For a multi-zone the process. Automatic unit switch-off During extended breaks from photographing, the flash unit is switched automatically to an energysaving standby state to prevent the power source from discharging (Auto-Off). Through the wake-up function, the flash unit is reactivated, for example when the shutter release is actuated. AF measurement flash, the decentralized AF sensors are supported in
D D-TTL Modern further development of the TTL flash control with measurement pre-flash technique for Nikon and Fujifilm cameras. 3D and D-TTL-3D For the 3D-TTL (Nikon) and D-TTL-3D flash control, additional data such as the distance to the subject, for example, is taken into consideration in the flash exposure. Dot matrix display with soft keys Individual adaptation of the display on the camera system and the operating state for optimum and self-explanatory operation of the flash unit via soft keys. E E-TTL Modern measurement further development technique for of the TTL flash control with pre-flash Canon EOS and PowerShot cameras. E-TTL II
Flash readiness indication The flash readiness indication illuminates when there is enough energy in the flash capacitor of the flash unit. G Guide number (GN) The guide number is the code number for the light output of a flash unit. It is dependent on the set light sensitivity ISO and (for zoom reflectors) on the reflector position, as well as on any reflector attachments that may be in use (e.g. wideangle or telephoto lens cover). For high speed synchronization (HSS), the guide number is dependent on the shutter speed as well. H HSS high speed synchronization In high speed synchronization (HSS), you can flash with exposure times that are shorter than the flash sync time of the camera. As a result, flash photos with wide aperture openings are possible for high ambient light levels, for example to limit the depth of field in portrait shots. I For E-TTL-II, additional data is taken into consideration during i-TTL Modern further development of the TTL flash control with measurement pre-flash technique for Nikon and Fujifilm cameras. i-TTL-BL For the i-TTL BL flash control, additional data such as the distance to the subject, for example, is taken into consideration in the flash exposure. K

Automatic flash mode A photo sensor integrated in the flash unit measures the subject during photographing, and automatically terminates the light output as soon as the subject is correctly exposed.
flash exposure such as the distance to the subject and the guide number of the flash unit, for example. Extended zoom
B Buzzer Additional acoustic status messages can be activated for flash readiness, flash exposure control as well as warning tones. F C Correct exposure indication The correct exposure indication OK is shown on the flash unit after the photograph if the subject in automatic or TTL flash mode was correctly exposed.
With Motor Zoom mode, the main reflector illuminates the subject more than necessary by one reflector position. As a result, the additional dispersed light provides softer illumination of the subject.
Key function Locking of the operating elebracketing series with ments. Protects against unintentional changes. L LCD / LED display Provides information on the flash modes and settings being used. (>>> Dot matrix display) Flash
Flash bracketing three photos of different flash exposure: minus correction value, no correction value, and plus correction value.
M Manual flash mode Flash mode with unregulated light output. The flash unit delivers the full light output, if no partial light output is set. Manual zoom The zoom position of the main reflector and thus the illumination of the flash unit can be adjusted manually to the lens focal length. Modeling light Modeling light is a stroboscope light with a high flash frequency lasting a few seconds. With this quasi permanent light, the light dispersion and shadow formation at the subject can be checked before taking the photograph. Motor zoom The zoom position of the main reflector and hence the illumination of the flash unit can be adjusted automatically to the lens focal length. P Partial light mode Manual flash mode with unregulated light output. By setting partial light mode on the flash unit, the light output or illumination duration of the flash unit can be adapted specifically to the photographic situation. P-TTL Modern measurement further development of the TTL flash control with pre-flash technique for Pentax and Samsung cameras. R REAR Synchronisation to the 2nd shutter curtain for more natural blurring effects for longer exposure times.

Remote operation A remote system consists of a master or controller flash unit on the camera and one or more slave flash units. The slave flash unit is remotely controlled wirelessly by the master or controller flash unit. With a master flash unit, the flash light contributes to the exposure, in contrast to a controller flash unit. S SCA 3002 adapter system For system cameras with digital or analog data transmission between the camera and flash unit. By using an SCA adapter from the SCA 3002 system, there are numerous additional system flash functions available with flash units from the SCA 3002 system, depending on the type of camera. The firmware of an SCA adapter from the SCA 3002 system is updateable via Metz service for future cameras. The SCA 3002 adapters are an updated version of the SCA 3000 system. SCA 300 adapter system For system cameras for adaptation to flash units of the SCA 3002 or SCA 300 system. Depending on the type of camera, not all system flash functions are supported by the SCA 300 system. Secondary reflectorr To brighten shadows cast in the close-up ranges which appear when using an indirect flash. Slave mode An integrated sensor makes this wireless slave flash mode possible in combination with a master or controller flash unit. (>>> Remote operation) Stroboscope mode Manual flash mode for flash sequences with a selectable intensity, frequency, and number of flashes, e.g. for special effect photos and motion studies.
Swivel reflector Can be tilted horizontally and vertically for indirect flash. Can be tilted vertically for indirect flash. T TTL flash control While taking the photograph, the flash light is measured through the lens (TTL = through the lens) by a sensor in the camera. The light output of the flash unit is terminated as soon as the subject is correctly exposed. TTL fill-in flash control Reduces too high subject contrast (e.g. to brighten dark shadowy areas in bright sunshine). U USB Interface for firmware updates via the Internet. W Wake-up The flash unit can be reactivated by actuating the shutter release if the flash is in energy-saving standby mode after an extended break from taking photographs. (>>> Automatic unit switch-off) Wide-angle attachment Increases the light angle of the flash unit. Depending on the type of flash unit, the wide-angle attachment is either integrated or attachable as an accessory. Z Zoom size Automatic adaptation of the display of the reflector position of the flash unit to the picture-taking chips for digital cameras.

Metz Quality made in Germany Core competencies in the fields of consumer electronics, photo electronics, and plastics engineering form the basis of the excellent worldwide reputation of Metz-Werke.
Your authorised Metz dealer
Metz-Werke GmbH & Co KG P. O. Box 1267 D-90506 Zirndorf/Germany Fon: +49 (0) 911 - 97060 Fax: +49 (0) 911 - 9706340 www.metz.de info@metz.de Subject to delivery options and changes. P133XGB Printed in Germany 12/2009
Metz immer erstklassig always first class.

The Fascination of Flash Photography
Metz mecablitz Flash units for analog and digital cameras
Metz mecablitz Complete Photo Electronics Catalogue 2010/2011
Metz always first class. www.metz.de

Contents

Into the future with tradition Photo Gallery Product Families
System Flash Units Metz mecablitz 58 AF-2 digital Metz mecablitz 50 AF-1 digital Metz mecablitz 44 AF-1 digital Metz mecablitz 36 AF-5 digital Metz mecablitz 24 AF-1 digital
SCA Flash Units Metz mecablitz 76 MZ-5 digital Metz mecablitz 45 CL-4 digital Metz mecablitz 54 MZ-4i digital
Automatic Flash Units Metz mecablitz 36 C-2 + Metz mecablitz 20 C-2
Slave/servo flash units Metz mecablitz 28 CS-2 digital Metz mecablitz 15 MS-1 digital
Quick Search Technical Data Accessories Technical Dictionary
Into the future with tradition
For decades, Metz has played a leading role in professional flash photography. Its no wonder, because the companys product range is very diverse. Ranging from handy and compact up to powerful handheld flashguns, there is just the right light for any need. The highly-developed SCA adapter system is another Metz strength. It makes it possible for Metz SCA flash units to be used on many cameras. Metz thus successfully manufactures products that stand out due to their versatility, long service life, and quality.

Excellent quality

Metz flash units operated convincingly in many tests. This is the case for light performance as well as reliability and handling. In order to maintain this quality, the Metz plants in Zirndorf near Nuremberg consistently rely on development and production in its German location. Highly-qualified personnel and our own training system, as well as the know-how from decades of development work, combined with demanding quality management (ISO 9001) in all corporate divisions guarantee that the highest demands are met: Metz always first class.

Metz Ideas have a future

Through an entire series of pioneering technical work, the Metz plants have established an excellent reputation over many decades. This is the result of core competences in the areas of electronics and plastics engineering. An entire series of innovations, such as the worlds first
integrated USB port in the mecablitz 58 AF-2 digital, mecablitz 50 AF-1 digital, mecablitz 44 AF-1 digital

Technical perfection

Decades of development experience and production in Germany ensure the high technical standard of Metz devices. The use of high-quality components in connection with the most modern high-tech SMD assembly machines ensure that you can rely on Metz products. Convincing evidence for this is the worldwide marketing of high-quality products, both in the flash sector as well as in ultramodern TV production.
and mecablitz 15 MS-1digital, or the self-learning servo mode of the mecablitz 28 CS-2 digital, are typical examples of this.

Photo Gallery

More fun better pictures
Using a flash pays off: Anyone using additional light when taking a photograph obtains better results, because in post-processing, it isnt possible to obtain missing colors or brilliance from the picture: The methods: Using a flash doesnt only mean flooding a dark subject with light; it also means handling this light in a targeted manner as well as creatively. There are very different methods available to achieve this. It starts with a direct flash of the subject with a flash unit fastened to the camera, and continues with a bounce flash, which is made possible by turning and tilting the reflector head. This way, the light can be redirected either with a special bounce diffuser or with an extendable, integrated reflector card. In addition, there are other flash methods that can be achieved through an off-camera use of the units. Adjusting the flash exposure plays a major role in the effect of a subject. In many Metz flash devices, the amount of light can be controlled variably, and thus balanced entirely according to need. In this way, a lighting mood is never lost. There is even considerable advantage in using a Metz flash in daylight. Shadowed areas or backlight can be brightened optimally in this way, and it enables pictures with undreamed-of sharpness and brilliance. In contrast to bygone eras, flashes and cameras themselves already contribute a great deal to successful exposure. These days, no flash photographer has to spend time on f-stop calculations or use various formulas. Intelligent units have now taken over most of the work. With the help of various special functions, one can concentrate on the essentials, i.e. the picture composition. That way, using a flash is really fun!

* subject to camera

Sy s t e m f l a s h u n i t s
Using a flash is more fun than ever before. Its no wonder, because with Metz system flash units, operation simplicity is assured. Clearlyarranged displays, some of them even illuminated, give information, for example, about what values the respective flash program automatically sets. Sophisticated flash techniques are therefore childs play. There is also the guaranteed future factor for units with an integrated USB port. Its not without good reason that the mecablitz 58 AF-1 digital was given the prize for the Best Flash Unit in Europe 2007/2008*. Mecablitz 48 AF-1 can proudly display the Tipa Award Best Accessory 2008. Both units have now gained worthy successors in the mecablitz 58 AF-2 and 50 AF-1.

F l a s h t ip

Spanning large distances:
The choice of flash mode decisively affects the mood in photography. The pictures compared on this page show an effectively brightened subject that was at a great distance. In this connection, it was wise to use a powerful flash unit such as the Metz mecablitz 58 AF-1 digital. It can also brighten parts of pictures distant from one another both effectively and extremely accurately. There are special camera-specific functions available for this purpose, depending on the version.

*EISA Award 2007/2008

Obtaining the lighting mood:
Thanks to modern flash controllers such as, for example, E-TTL, i-TTL, P-TTL, and ADI, the light output of Metz system flash units can be controlled by the camera. If the existing lighting mood is to be retained, it is important to use a shutter time that is longer than the flash synch time. For portraits, however, an exposure time of 1/60 second should not be exceeded.

Automatic Flash Units

SCA Flash Units

System Flash Units

m e c a b l i t z AF - 2 d igi ta l

For the ambitious

Top model with new fine tuning Even an award-winner can be made better. The best flash unit in Europe 2007/2008* has received a little more fine tuning. In order to carry on meeting the highest standards in quality, a high quality metal base** has been added which can be attached to the cameras flash shoe in one easy movement. Technically speaking, no wish is left unfulfilled. The innovative high performance unit boasts a USB interface through which specific firmware for each model variant can be conveniently updated via computer and Internet. It looks sleek, artfully meters flash and is both intuitive and impressively powerful. Equipped with new innovations, the Metz mecablitz 58 AF-2 digital offers cutting-edge secondary reflector technology, high performance energy management, multiple zone AF flash metering and a fully pivoting reflector system. The Metz top model works with all camera-specific system flash modes from Canon, Nikon, Pentax, Olympus/Panasonic or Sony Alpha cameras including their respective wireless TTL modes. If the camera has a built-in flash then the mecablitz 58 AF-2 digital can be employed wirelessly in the system, even in servo mode. Thanks to its high guide number, the 58 AF-2 digital is not only extremely powerful but can also be used effectively for bouncing flash. Metz has integrated a flip-out reflector card for its vertically tilting and horizontally swivelling reflector. Thanks to the integrated and system controlled secondary reflector, bouncing flash adds additional brilliance to close-ups.

Flash output

high max. GN of 58 for ISO 100/21 and 105 mm

Basic configuration

secondary reflector with 3 light output ratios vertical (-7/+90) and horizontal (300) swivel reflector easy operating concept illuminated dot-matrix display motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 12 mm illumination reflector card that can be flipped open for soft flash illumination modeling light (permanent light for checking the photo) integrated autofocus multi-zone measuring flash Flash readiness indicator and correct exposure display on unit and camera (subject to camera model) flash range indicator automatic unit switch-off and manual key lock Metal base** with quick lock

Standard flash modes

TTL flash mode automatic flash mode with 12 automatic apertures manual flash mode with 25 partial lighting levels stroboscope mode HSS high speed synchronization 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL or automatic flash mode automatic fill-in flash flash bracketing
* Mecablitz 58 AF-1 digital was awarded the EISA Best Product 2007-2008. **excluding Sony model

In detail

Detail metal base**
Extendible reflector card

Tilt reflector

Easy to operate

USB port

Secondar y reflector with 3 par tial lighting levels
GN of 58 at ISO 100/21 (105 mm) GN of 42 at ISO 100/21 (50 mm)
Camera-specific system flash modes

Canon Version

E-TTL- / E-TTL-II flash mode E-TTL remote mode (Master, servo and slave mode)
CANON NIKON FUJIfilm OLYMPUS PANASONIC PENTAX SONY

Nikon/Fujifilm Version

i-TTL / D-TTL / 3D flash mode i-TTL remote mode (Master, servo and slave mode)
Olympus/Panasonic/Leica Version
Four Thirds TTL flash mode Four Thirds TTL remote mode (Slave and servo mode)

Pentax Version

P-TTL flash mode P-TTL remote mode (master and slave operation)

Sony alpha Version

ADI flash mode ADI remote mode (master and slave operation)
Guaranteed in the future Power supply

Swivel reflector

Simple operation

USB inter face
GN of 44 at ISO 100/21 (105 mm) GN of 32 at ISO 100/21 (50 mm)
E-TTL / E-TTL II flash mode E-TTL remote mode (slave mode)
CANON NIKON FUJIfilm (i-TTL) OLYMPUS PANASONIC PENTAX SONY
i-TTL / i-TTL BL i-TTL remote mode (slave mode)
Four thirds TTL flash mode Four thirds TTL remote mode (slave mode)
P-TTL flash mode P-TTL remote mode (slave mode)
ADI flash mode / pre-flash TTL ADI remote mode (slave mode)
Ready for the future Power supply
Firmware update via integrated USB socket 4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries
Mecabounce 52-90 for softer illumination (Fig. similar)
Reflector umbrella 58-23 for bouncing flash
m e c a b l i t z AF - 5 d igi ta l

For demanding beginners

The compact class Presenting the Metz mecablitz 36 AF-5C digital for Canon, 36 AF-5N digital for Nikon, 36 AF-5O digital for Olympus and Panasonic, 36 AF-5P for Pentax and 36 AF-5S for Sony Alpha, in the smart Cobra design. With these sophisticated entry-level models Metz has just the right flash solution for these digital camera user groups. In addition, they are impressive because of their easy operation. Even bounce flash becomes childs play, due to the vertically-tilting reflector. The manuallyadjustable zoom reflector has other advantages. By adjusting the reflector to different focal lengths, the illumination angle of the 36 AF-5 digital can be optimally utilized.
max. GN of 36 for ISO 100/21 and 85 mm
vertically tilting reflector +90 LED displays manual zoom reflector for 28 - 85 mm illumination integrated autofocus measurement flash flash readiness and exposure control indicators on the unit and camera (subject to camera) 18 mm diffuser included in delivery Automatic unit shut-off
TTL flash mode First and second shutter curtain synchronisation (subject to camera) Manual flash exposure correction via TTL flash mode (subject to camera) automatic fill-in flash
Spotlight for AF measurement flash
Tilt reflector (only vertical)
Zoom reflector (28-85 mm)
Wide-angle adapter (18 mm)
GN of 36 at ISO 100/21 (85 mm) GN of 30 at ISO 100/21 (50 mm)

E-TTL flash mode

i-TTL flash mode
Four Thirds TTL flash mode

P-TTL flash mode

ADI flash mode firmware update possible via Metz Service
4 x AA alkaline-magnesium batteries 4 x AA NC or NiMH rechargeable batteries

Perfect travel companion

The new mecablitz 24 AF-1 digital is perfect when youre on the go. Thanks to the compact, slim-line and lightweight design it can be stashed easily in a jacket pocket and is at hand just when you need it. Currently the smallest Metz system flash unit with GN 24 for ISO 100/21 and 35 mm focal length, it is particularly suited to flash novices who are looking for better illumination in their photos than is possible with an integrated camera flash. Thanks to intelligent TTL camera control the mecablitz 24 AF-1 digital even makes automatic fill-in flash possible. Additional illumination levels are also possible thanks to the 90 adjustable swivel reflector. Flash readiness and exposure levels are displayed on the back of the unit by two LED indicators.
Max guide number 24 for ISO 100/21 and 35 mm
Vertical swivel reflector +90 LED display Integrated autofocus flash metering Flash readiness and correct exposure display on unit and camera (subject to camera)
TTL flash mode First and second shutter curtain synchronisation (subject to camera) Manual flash exposure correction for TTL flash mode (subject to camera) Automatic fill-in flash
Beam for AF flash metering
Swivel reflector (vertical)
GN of 24 at ISO 100/21 (35 mm)

E-TTL flash mode

Four thirds TTL flash mode

ADI flash mode

Firmware update via Metz Service 2 x AA alkaline-magnesium or lithium batteries 2 x AA NC or NiMH rechargeable batteries
The unique special feature of Metz SCA flash units is that one and the same flash unit can be used with different cameras it doesnt matter whether they are digital or analog. By simply replacing the adapter, system cameras from different manufacturers can be used, because they offer the richest array of special functions. Flash units with SCA adapters are just as suitable for system camera owners as for medium-format camera owners. All members of the SCA family meet this criteria, whether it is a handheld flash gun or a compact flash.

A second look

Many wedding photographs are exclusively standard poses. Anyone who comes up with additional ideas here can score bonus points. Why not photograph the bridal couple or wedding guests during small talk? With some flash, the subject is given additional sharpness and brilliance. For this purpose, there are different partial light output levels to choose from with Metz handheld flash guns.

Perfectly-equipped

Tough professional use requires the maximum flash power. The new, practical, high-power Power Pack P 76, which attaches to your belt, provides even more energy. This increases flash output, while simultaneously reducing the flash recycle time. This is a dramatic improvement, which makes it possible to fall back on maximum flash power when taking a battery-draining series of shots.
m e c a b l i t z M Z - 5 d igi ta l

Light power for pros

Powerful handheld flash guns Worldwide, professional photographers put their trust in the powerful 76 MZ-5 digital from Metz. Above all at weddings and fashion shows, its ability to take fast series of shots pays off. Its secondary reflector which makes it possible to set perfect highlights in the eye is worth its weight in gold. It goes without saying that the camera-specific system flash modes of the various manufacturers can also be used perfectly with this professional flash, through different SCA adapters.All menu navigation settings can be activated from the device itself, and a locking function means you wont accidentally change fixed values. Of course, the 76 MZ-5 digital keeps up with the times and provides outstanding flash convenience with a great deal of creative flexibility in setting up shots. Discriminating photographers will appreciate the lasting flash performance ensured by the NiMH rechargeable battery and the Metz charger. It offers considerably more power than the previous NiCad rechargeable battery. The control unit of the 76 MZ-5 digital is specially equipped with a large, illuminated dot matrix display. Plus, the reflector of the zoom flash unit automatically adapts to a focal length range of 24 - 105 mm depending on the type of camera. A wide-angle diffusing disk, included with the flash, enables expansion to 20 mm.
high max. GN of 76 for ISO 100/21 and 105 mm
SCA adapter system (universal flash unit useable with different cameras) secondary reflector with 3 lighting levels vertical (+90) and horizontal (270) tilt reflector control unit with illuminated dot matrix display easy operating concept motor zoom for 24 - 105 mm illumination accompanying wide-angle diffuser for 20 mm illumination modeling light (permanent light for checking the illumination) integrated auto-focus measurement flash in the control section flash readiness and exposure control indicators on the unit and camera (subject to camera) flash range indicator in LCD manual key lock

high max. GN of 45 for ISO 100/21 and 35 mm
SCA adapter system (flash unit useable with different cameras) socket for SCA 3045 digital cable (to connect to SCA adapter on camera shoe) secondary reflector with 3 lighting levels vertical (+90) and horizontal (360) tilt reflector LED displays standard 35 mm illumination accompanying wide-angle diffuser for 28 mm illumination integrated auto-focus measurement flash (only via connection cable SCA 3045) flash readiness and exposure control indicators on the unit and camera (subject to camera) flash range indicator in LED (for manual settings)
TTL flash mode automatic flash mode with 6 automatic apertures manual flash mode with 5 partial lighting levels HSS high speed synchronization (subject to camera) 1st and 2nd shutter curtain synchronization (subject to camera) manual flash exposure correction for TTL flash mode (subject to camera) automatic fill-in flash

IN DETAIL

Secondar y reflector
SCA 3002 adapter with SCA 3045 cable
GN of 45 at ISO 100/21 (35 mm)
45 CL-4 DiGITAL BASIC Digital
Wide-angle diffuser Sync cable Camera bracket Empty battery basket 45-39

45 CL-4 DIGITAL KIT

Wide-angle diffuser Connection cable SCA 3045 digital Camera bracket NiMH rechargeable battery and charger
Four Thirds TTL flash mode

P-TTL flash mode

ADI flash mode ADI remote mode (slave function) firmware update possible via Metz Service
Metz NiMH rechargeable battery 45-56 (included with kit version) powerful Metz NiMH Power Pack P 76 with V 76 cable alkaline-magnesium batteries (Battery basket 45-39 required separately; already included with BASIC version)

NiMH charger set B46

Batter y basket 45-39
Mecabounce 45-90 for softer illumination (Fig. similar)
m e c a b l i t z M Z - 4 i d igi ta l

For semi-professionals

Especially versatile: Presenting the simple and highly functional flagship of the Metz SCA compact flash units. It is convincing due to the: High light output: GN of 54 at ISO 100/21 and 105 mm focal length. Large light angle: illumination of a focal length range of 24-105 mm. switch-controlled secondary reflector, with light output that can be reduced by using a grey filter. Ease of use: a large display ensures you always have a good overview. Only two function keys and a control dial facilitate good handling. Great flexibility: To begin with, the Metz 54 MZ-4i digital is available with a standard foot. Furthermore, due to the SCA system, there are many adapters available for almost any camera. Diversity: Via various adapters, there are also a great deal of interesting special functions such as E-TTL and E-TTL II flash mode from Canon, i-TTL from Nikon, or ADI flash control from Sony Alpha, and many more, which increase the creative flexibility.

Long exposure times

It is worth experimenting with exposure times that are longer than the flash sync speed. For moving objects, interesting blurring effects and a corresponding brightening of the foreground can be obtained in a range of approx. 1 second. By the way, the easiest way to extend the range of a flash unit is to increase the ISO setting on the camera. To be set at 1600 ISO instead of 100 thus quadrupling the range of the flash unit.

mecablitz 36 C-2

For beginners
connection to camera via hot-shoe contact (x-synchronization) or via sync cable (included in delivery) vertically tilting reflector +90 LED displays manual zoom reflector for mm illumination flash readiness and exposure control indicator on the unit
automatic flash mode with 3 automatic apertures manual flash mode

standard sync cable

Reliable: Those who are looking for a precise automatic flash with a tilting reflector unit will be well-served by the mecablitz 36 C-2. It offers three different automatic apertures (8, 4, 2, at ISO 100/21) as well as a manually
adjustable zoom reflector, with which the light output can be optimized within the focal length of 28 - 85 mm. LED displays on the back of the unit give information about the flash readiness and correct exposure.

Zoom reflector (28-85mm)

Standard sync cable 36-50
Camera bracket 40-36 Spiral sync cable 36-52

mecablitz 20 C-2

For price-conscious beginners
Small, but look out: This is an ideal complement for everyone who loves compactness and doesnt want to go without good flash photos. The smallest compact flash unit currently available from Metz is clearly more effective than the flash integrated into the camera. The mecablitz 20 C-2 with GN 20 at ISO 100/21 and 35 mm focal length is intended for all those who prefer a flash which will also fit into your jacket pocket. This small, chic model offers two automatic apertures. And the special key feature is the swivel reflector! LED displays on the back of the unit provide information about the flash readiness and also the correct exposure.

max. GN of 20 for ISO 100/21 and 35 mm
connection to camera via hot-shoe contact (x-synchronization) or via sync cable (included in delivery) vertically tilting reflector +90 LED displays flash readiness and exposure control indicator on the unit
automatic flash mode with 2 automatic apertures manual flash mode
2 x AA alkaline-magnesium batteries 2 x AA NC or NiMH rechargeable batteries

standard sync cable

Practical tilt reflector

Camera bracket 40-36

GN of 20 at ISO 100/21 (35 mm)
S l av e / SERVO f l a s h u n i t s
Servo mode (light controlled): With the mecablitz 28 CS-2 digital, you have a pure slave flash unit at your disposal that only flashes when you want it to with any camera. This is made possible by its learning function, which recognizes the pre-flash of your camera and only responds to its main flash. With this model, the picture results can be controlled very easily via the plus/minus buttons. Metz slave mode (wireless Metz remote system): This clever Metz system facilitates targeted light control for two Metz flash units. Here, one is attached directly to the camera as a so-called master flash. In contrast, the other slave flash unit can be positioned anywhere in the room. For this type of slave mode, a current Metz SCA flash unit is equipped with an SCA slave adapter (SCA-3083) instead of the SCA camera adapter, which is used for a conventional flash. This slave adapter makes additional slave qualities possible. By using a mecalux 11 as a server flash trigger, a flash unit can also be activated. However, all settings must be made on the flash unit itself here. Slave mode for the respective camera manufacture: The three system flash units mecablitz 58 AF-2 digital, mecablitz 50 AF-1 digital und 44 AF-1 digital open up another way to use slave mode. These models can be used as intelligent slave versions, supporting the flash modes of the respective camera manufacturers. In addition, the mecablitz 58 AF-2 digital has a master function that you can always use if the integrated flash of the camera doesnt provide a master mode.

Side lighting

The slave flash mode is interesting in order to obtain especially varied directed lighting. Completely without a cable (wireless), this method can be used to place and trigger an external flash at any place in the room. In this way, interesting additional lighting can be set, whether in the form of a light accent or a side light, for example. Naturally, multiple slaves can be used at the same time. It is particularly exciting to use this to obtain separate lighting for the subject and the background of the picture.

Easy control with the +/- buttons

Clearly laid out display

Perfect for mounting on the integrated, extendible telescopic bracket
GN of 28 at ISO 100/21 (85 mm) GN of 22 at ISO 100/21 (35 mm)
Learning mode: optimum adaptation of the flash unit to the camera-specific pre-flash only once at the beginning Metz-specific TTL remote mode (slave mode) with other Metz flash units as the master
firmware update possible via Metz Service 2 x AAA alkaline-magnesium batteries 2 x AAA NC or NiMH rechargeable batteries
wide-angle diffuser (24 mm) telephoto attachment 85 mm extendible, integrated telescopic bracket to be fastened to the tripod socket of the camera
SUITABLE FOR ALL CAMERAS WITH BUILT-IN FLASH

Special feature

m e c a b l i t z M S - 1 Digi ta l
For those who love attention to detail
Innovation in the macro world! As a wireless macro flash, the Metz mecablitz 15 MS-1 digital has two individually adjustable reflectors. As a result this new ring-shaped macro flash ensures even, precise lighting On the other hand it also enriches creative lighting configuration in the macro range. There are no limits to personal creativity thanks to the individually adjustable reflectors (0- 20) and the associated finely calibrated light-distribution. In this way it is particularly easy to create effective highlights with any subject. This is all achieved with maximum ease because the Metz mecablitz 15 MS-1 digital automatically adjusts its light output by means of wireless TTL*, making it particularly reliable and precise. There is also a clear, dot-matrix display, which makes the mecablitz 15 MS-1 digital even easier to use. If you are looking for even greater scope for creativity, you can use the manual control facility of the new mecablitz 15 MS-1. This enables you to vary the amount of light given off, with six levels of light output. Spacesaving internal (rechargeable) batteries provide efficient power supply. The Metz mecablitz 15 MS-1 digital is compatible with all camera manufacturers (Canon, Nikon, Olympus, Panasonic, Pentax und Sony-Alpha) and naturally, even if the camera has no built-in flash, manual flash mode is possible via sync cable.

High max. guide number of 15 with ISO 100/21 und 50 mm
Two reflector system, individually adjustable (0 , 10 , 20 ) and separately accessible. Ratio (light distribution from left to right) 8:1, 4:1, 2:1, 1:1, 1:2, 1:4, 1:8 DOT matrix display Second shutter curtain synchronisation (subject to camera) Slow synchronisation (SLOW) Autofocus auxiliary light
Wireless servo flash mode with/without pre-flash suppression Servo mode with learning function Manual flash mode (operation via sync socket/servo)
*For TTL operation in the remote mode, you need a master flash unit. Depending on the camera manufacturer or camera model, the TTL specific master function has an integrated or external flash, as the Metz 58 AF-1 or the Metz 58 AF-2. More details at www.metz.de

Dot-matrix display

Wireless TTL flashes

3-stage swivel reflector

Bouncer disk included makes for softer lighting.
GN of 15 at ISO 100/21 (50 mm)
Camera-specific flash modes
Wireless TTL flash control, remote slave mode available for:
E-TTL / E-TTL II flash mode

Olympus

RC system

DSLR remote flash mode

Firmware update via integrated USB socket Integrated power supply via 2 x AAA (micro) alkaline magnesium batteries (1.5V) 2xAAA (Micro) NiMH/NC rechargeable batteries (1.2V) 2xAAA (micro) lithium batteries (1.5V)

Accessories included

Bounce diffuser Adapter ring 52 mm, 55 mm, 58 mm IR filter bracket Belt pouch
Bouncer dif fuser (included)
Adapter rings (52, 55, 58mm) and IR brackets (included)

Belt pouch (included)

Adapter rings (62, 67, 72mm) (optional extra)
* With respective remote slave operation

Q u ick s e a r c h

CANON Analog EOS cameras (except EOS 300X) Digital cameras NIKON Analog AF-SLR cameras Digital cameras FUJIFILM S7000, S9500, S9600, S100FS, S200EXR, HS10 HASSELBLAD 6x6 LEICA R4, R4s, R5, R6, R6.2, R7, RE MAMIYA 645 Pro TL OLYMPUS C-770, C-8080, SP-350, SP-570 UZ, E-Serie, Pen E-P1, Pen E-P2, Pen E-PL1 PANASONIC DMC-FZ20, DMC-FZ30 PENTAX DSLR ROLLEI 2,8GX, 6008 SAMSUNG GX-10, GX-1L, GX-1S, GX-20 SONY Alpha SCA 3302 SCA 3302 SCA 3302 + SCA 3045 SCA 3702 SCA 3702 SCA 3702 + SCA AF, Hy6 SCA 356 + SCA 300 D SCA 3562 SCA 356 SCA 3562 SCA 356 + SCA 300 A SCA 3562 + SCA 3045 SCA 3702 SCA 3702 SCA 3702 + SCA 3045 DMC-LC 1 DMC-FZ50, DMC-L1, DMC-L10, DMC-LX3, DMC-G1, DMC-GH1, DMC-G10, DMC-GSCA 3502 SCA 3202 SCA 300A + SCA 301 SCA 3502 M5 SCA 3202 SCA 300A + SCA 301 SCA 3502 M5 + SCA 3045 SCA 3202 + SCA 3045 SCA 3202 SCA 3202 SCA 3202 + SCA AF, ZD SCA 396 + SCA 300 E + 50-35 SCA 3952 SCA 396 SCA 3952 SCA 396 SCA 3952 + SCA 3045 R8, R9, M6 TTL, M7, M8, Digilux 2, CM, M8.2, M9 Digilux 1 Digilux 3, V-Lux 1, D-Lux 4 SCA 351 SCA SCA 3202 SCA 351 SCA 3502 SCA 300A + SCA 301 SCA 3202 SCA 351 + SCA 300 A SCA 3502 + SCA 3045 SCA 300A + SCA 301 SCA 3202 + SCA 3045 H1, H2, H3, H4 SCA 390 SCA 3902 SCA 390 SCA 3902 SCA 390 + SCA 300 A SCA 3902 + SCA 3045 S1 Pro, S2 Pro, S5 Pro S3 Pro 301 SCA 3402 SCA 3402 SCA 300A + SCA 301 SCA 3402 SCA 3402 SCA 300A + SCA 301 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 (except F6) F6 DSLR (except D100, D1x, D2x, D2h) D100, D1x, D2x, D2h Coolpix 8400, 8800, P5000, P5100 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 DSLR Power Shot G6, G7, G9, S5 IS, G10, G11, SX1 IS, SX10 IS, SX20 IS SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 + SCA 3045 SCA 3102 + SCA 3045 SCA 3102 + SCA 3045

Regarding your type of camera, also take note the SCA packaging imprint and the M version of the adapter. For current versions of the flash units or alternatively the adapters, see www.metz.de.

45 CL-4 digital Basic

45 CL-4 digital kit inCl. SCA 3045

76 MZ-5 digital

58 AF-2C 58 AF-2C 58 AF-2C
SCA 3102 SCA 3102 SCA 3102
50 AF-1C 50 AF-1C 50 AF-1C
44 AF-1C 44 AF-1C 44 AF-1C
36 AF-5C 36 AF-5C 36 AF-5C
24 AF-1C 24 AF-1C 24 AF-1C
58 AF-2N 58 AF-2N 58 AF-2N 58 AF-2N 58 AF-2N
SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402
50 AF-1N 50 AF-1N 50 AF-1N 50 AF-1N 50 AF-1N
44 AF-1N 44 AF-1N 44 AF-1N

36 AF-5N 36 AF-5N

24 AF-1N 24 AF-1N 24 AF-1N

44 AF-1N

36 AF-5N

58 AF-2N 58 AF-2N

301 SCA 3402 SCA 3402
50 AF-1N 50 AF-1N 44 AF-1N

36 C-AF-5N

20 C-AF-1N

SCA 390 + 40-36 SCA 3902

58 AF-2O

SCA 351 SCA SCA 3202

50 AF-1O 44 AF-1O

36 C-AF-5O

20 C-AF-1O
SCA 396 + SCA 300 E + 40-36 SCA 3952

58 AF-2O

SCA 3202

50 AF-1O

44 AF-1O

36 AF-5O

24 AF-1O

58 AF-2O

301 SCA 3502 SCA 3202

50 AF-1O 44 AF-1O

36 C-AF-5O

20 C-AF-1O

58 AF-2P

SCA 3702

50 AF-1P

44 AF-1P

36 AF-5P

24 AF-1P

58 AF-2P
SCA 356 + SCA 300 D SCA 3562 SCA 3702

50 AF-1P 44 AF-1P

36 AF-5P

24 AF-1P

58 AF-2S

SCA 3302

50 AF-1S

44 AF-1S

36 AF-5S

24 AF-1S

28 CS-2 DIGITAL is suitable for compact cameras of all brands with an integrated flash
* The following operating modes are available, depending on camera configuration: - Remote TTL slave - Servo with or without pre-flash suppression - Manual mode via sync cable Please follow the operating instructions. Consult www.metz.de for more information

15 MS-1 Digital*

54 MZ-4i digital

24 AF-1/20 C-2

58 AF-2 digital

50 AF-1 digital

36 AF-5/36C-2

44 AF-1

36 C-2

0,3/2,5 0,1/3

148 99

125 108

137 99

128 105

115 95

110 87

140 75.32.5

144 38

1) With connecting cable SCA 3045 2) With slave adapter SCA 3083 digital and connecting cable SCA 3045 3) With battery case 45-39 4) With slave adapter SCA 3083 digital 5) Running on micro-cells (AAA): NiMH (1000 mAh) 6) With SCA 3045 (subject to camera) 7) subject to camera

54 MZ-4i

45 CL-4 digital BASIC

45 CL-4 digital KIT

58 AF-1/-2 digital
50 AF-1 digital/ 48 AF-1 DIGITAL

Acc e s s o r i e s

Rechargeable batteries and battery case NiMH rechargeable batteries 45-56 NiMH rechargeable batteries 76-56 Battery basket without batteries 45-39 Charging sets and chargers NiMH charger set B 46 NiMH charger set B 47 Power packs and accessories Power Pack P 76 Set (incl. charger) Connecting cable V 76 (for P 50 / P 76) Connecting cable V 58-50 (for P 50 / P 76) Connecting cable V 54-50 (for P 50 / P 76) Connecting cable V 50 (for P 50 / P 76) mecabounce mecabounce 44-90 mecabounce 52-90 mecabounce 50-90 mecabounce 45-90 mecabounce 58-90 Sync cables Standard sync cable 15-50 Spiral sync cable 36-52 Spiral sync cable 45-49 Standard sync cable 36-50 (25 cm) Standard sync cable 45-47 (40cm) Standard sync cable 45-48 (100cm) Camera brackets and accessories Camera bracket 40-36 Camera bracket 32-38 Bracket adapter 60-28 Mounting bracket for control unit 50-35 Bracket plate for medium format 70-35

1) 1)

36 AF-4/36 AF-5

24 AF-1 digitaL

Bounce diffusers Bounce diffuser 54-23 (or 58-23) Bounce diffuser 76-23 mecalux mecalux 11 Camera straps Camera straps 50-31 Connecting cable SCA 3008 A for SCA 3002 adapter SCA 307 A for SCA 300 adapter SCA 3045 for SCA 300/3002 adapter SCA 300 A for SCA 300 adapter Adapters SCA 356 for Rollei 4) SCA 390 for Hasselblad 4) SCA 3102 for Canon SCA 3202 for Olympus / Panasonic / Leica SCA 3302 for Konica Minolta / Sony SCA 3402 for Nikon SCA 3502 for Leica SCA 3562 for Rollei 4) SCA 3702 for Pentax SCA 3902 for Hasselblad 4) SCA 3952 for Mamiya 4) SCA 3083 digital slave adapter SCA 300 E Standard foot 301 Lens adapter rings 62mm adapter ring 67mm adapter ring 72mm adapter ring

5) 5) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)
5) 5) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 5)

1) = Standard foot 301 required 2) = SCA 3045 required 3) = SCA 300 D required 4) Can be obtained from the reseller partners of the camera manufacturer 5) = SCA 300 A or SCA 3045 required
TE C HN I C AL G LOSSAR Y
A AF measurement flash An autofocus auxiliary light (AF measurement flash) integrated in the flash unit automatically supports the central autofocus sensor of the camera in the event of low ambient light. For a multi-zone AF measurement flash, the decentralized AF sensors are supported in the process. Automatic unit switch-off During extended breaks from photographing, the flash unit is switched automatically to an energy-saving standby state to prevent the power source from discharging (Auto-Off). Through the wake-up function, the flash unit is reactivated, for example when the shutter release is actuated. Automatic flash mode A photo sensor integrated in the flash unit measures the subject during photographing, and automatically terminates the light output as soon as the subject is correctly exposed. B Buzzer Additional acoustic status messages can be activated for flash readiness, flash exposure control as well as warning tones. C Correct exposure indication The correct exposure indication OK is shown on the flash unit after the photograph if the subject in automatic or TTL flash mode was correctly exposed.