* subject to camera

Sy s t e m f l a s h u n i t s
Using a flash is more fun than ever before. Its no wonder, because with Metz system flash units, operation simplicity is assured. Clearlyarranged displays, some of them even illuminated, give information, for example, about what values the respective flash program automatically sets. Sophisticated flash techniques are therefore childs play. There is also the guaranteed future factor for units with an integrated USB port. Its not without good reason that the mecablitz 58 AF-1 digital was given the prize for the Best Flash Unit in Europe 2007/2008*. Mecablitz 48 AF-1 can proudly display the Tipa Award Best Accessory 2008. Both units have now gained worthy successors in the mecablitz 58 AF-2 and 50 AF-1.

F l a s h t ip

Spanning large distances:
The choice of flash mode decisively affects the mood in photography. The pictures compared on this page show an effectively brightened subject that was at a great distance. In this connection, it was wise to use a powerful flash unit such as the Metz mecablitz 58 AF-1 digital. It can also brighten parts of pictures distant from one another both effectively and extremely accurately. There are special camera-specific functions available for this purpose, depending on the version.

*EISA Award 2007/2008

Obtaining the lighting mood:
Thanks to modern flash controllers such as, for example, E-TTL, i-TTL, P-TTL, and ADI, the light output of Metz system flash units can be controlled by the camera. If the existing lighting mood is to be retained, it is important to use a shutter time that is longer than the flash synch time. For portraits, however, an exposure time of 1/60 second should not be exceeded.

Automatic Flash Units

SCA Flash Units

System Flash Units

m e c a b l i t z AF - 2 d igi ta l

For the ambitious

Top model with new fine tuning Even an award-winner can be made better. The best flash unit in Europe 2007/2008* has received a little more fine tuning. In order to carry on meeting the highest standards in quality, a high quality metal base** has been added which can be attached to the cameras flash shoe in one easy movement. Technically speaking, no wish is left unfulfilled. The innovative high performance unit boasts a USB interface through which specific firmware for each model variant can be conveniently updated via computer and Internet. It looks sleek, artfully meters flash and is both intuitive and impressively powerful. Equipped with new innovations, the Metz mecablitz 58 AF-2 digital offers cutting-edge secondary reflector technology, high performance energy management, multiple zone AF flash metering and a fully pivoting reflector system. The Metz top model works with all camera-specific system flash modes from Canon, Nikon, Pentax, Olympus/Panasonic or Sony Alpha cameras including their respective wireless TTL modes. If the camera has a built-in flash then the mecablitz 58 AF-2 digital can be employed wirelessly in the system, even in servo mode. Thanks to its high guide number, the 58 AF-2 digital is not only extremely powerful but can also be used effectively for bouncing flash. Metz has integrated a flip-out reflector card for its vertically tilting and horizontally swivelling reflector. Thanks to the integrated and system controlled secondary reflector, bouncing flash adds additional brilliance to close-ups.

Flash output

high max. GN of 58 for ISO 100/21 and 105 mm

Basic configuration

secondary reflector with 3 light output ratios vertical (-7/+90) and horizontal (300) swivel reflector easy operating concept illuminated dot-matrix display motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 12 mm illumination reflector card that can be flipped open for soft flash illumination modeling light (permanent light for checking the photo) integrated autofocus multi-zone measuring flash Flash readiness indicator and correct exposure display on unit and camera (subject to camera model) flash range indicator automatic unit switch-off and manual key lock Metal base** with quick lock

Standard flash modes

TTL flash mode automatic flash mode with 12 automatic apertures manual flash mode with 25 partial lighting levels stroboscope mode HSS high speed synchronization 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL or automatic flash mode automatic fill-in flash flash bracketing
* Mecablitz 58 AF-1 digital was awarded the EISA Best Product 2007-2008. **excluding Sony model

In detail

Detail metal base**
Extendible reflector card

Tilt reflector

Easy to operate

USB port

Secondar y reflector with 3 par tial lighting levels
GN of 58 at ISO 100/21 (105 mm) GN of 42 at ISO 100/21 (50 mm)
Camera-specific system flash modes

Canon Version

E-TTL- / E-TTL-II flash mode E-TTL remote mode (Master, servo and slave mode)
CANON NIKON FUJIfilm OLYMPUS PANASONIC PENTAX SONY

Nikon/Fujifilm Version

i-TTL / D-TTL / 3D flash mode i-TTL remote mode (Master, servo and slave mode)
Olympus/Panasonic/Leica Version
Four Thirds TTL flash mode Four Thirds TTL remote mode (Slave and servo mode)

Pentax Version

P-TTL flash mode P-TTL remote mode (master and slave operation)

Sony alpha Version

TTL flash mode manual flash mode with 8 partial lighting levels HSS high speed synchronization 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL flash mode automatic fill-in flash flash bracketing

* excludes Sony model

Detail metal base*

USB por t

GN of 50 at ISO 100/21 (105 mm) GN of 36 at ISO 100/21 (50 mm)
E-TTL- / E-TTL-II flash mode E-TTL remote mode (Slave and servo mode)
i-TTL / D-TTL / 3D flash mode i-TTL remote mode (Slave and servo mode)
Four Thirds TTL flash mode Four Thirds TTL remote mode (Slave and servo mode)
P-TTL flash mode P-TTL remote mode (slave operation)
ADI flash mode ADI remote mode (slave operation)
Guaranteed in the future Power sources
4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries
Firmware update via integrated USB port
For price-conscious amateur photographers
Compact high performance With its slim-line design and new quick lock system for the unit base, the mecablitz 44 AF-1 digital is the perfect solution for price-conscious amateur photographers. The clear control panel on the back of the unit impresses with its simple operation; offering a high level of functional reliability. The high performance design affords reserve power in any photo situation (max. guide number 44 for ISO 100/21 and 105 mm). Depending on the camera, it has the appropriate application possibilities for any lighting conditions in TTL mode. The photographer can manually set up to 4 partial light levels enabling manipulation of lighting effects. With the appropriate camera model the mecablitz can also be synchronised to the first or second shutter curtain enabling variable options for creative lighting. Depending on the camera, the Metz 44 AF-1 also offers a slave mode, making wireless TTL flash childs play and opening up new dimensions in flash photography. Its motor zoom function (24 -105 mm), the fully swivelling reflector with flip-out reflector card and the integrated wide-angle diffuser (12 mm) afford the photographer additional creative scope.
Max. guide number 44 for ISO 100/21 and 105 mm
Vertical (+90) and horizontal (300) swivel reflector Simple operating concept Motor zoom for mm illumination Integrated wide-angle diffuser for 12 mm illumination Flip-out reflector card Modelling light (permanent light for checking the image (subject to camera)) Integrated auto focus flash metering Flash readiness indicator and correct exposure display on the unit and camera (subject to camera) Automatic unit shut-off

4 x AA alkaline-magnesium batteries 4 x AA NC or NiMH rechargeable batteries

Perfect travel companion

The new mecablitz 24 AF-1 digital is perfect when youre on the go. Thanks to the compact, slim-line and lightweight design it can be stashed easily in a jacket pocket and is at hand just when you need it. Currently the smallest Metz system flash unit with GN 24 for ISO 100/21 and 35 mm focal length, it is particularly suited to flash novices who are looking for better illumination in their photos than is possible with an integrated camera flash. Thanks to intelligent TTL camera control the mecablitz 24 AF-1 digital even makes automatic fill-in flash possible. Additional illumination levels are also possible thanks to the 90 adjustable swivel reflector. Flash readiness and exposure levels are displayed on the back of the unit by two LED indicators.
Max guide number 24 for ISO 100/21 and 35 mm
Vertical swivel reflector +90 LED display Integrated autofocus flash metering Flash readiness and correct exposure display on unit and camera (subject to camera)
TTL flash mode First and second shutter curtain synchronisation (subject to camera) Manual flash exposure correction for TTL flash mode (subject to camera) Automatic fill-in flash
Beam for AF flash metering
Swivel reflector (vertical)
GN of 24 at ISO 100/21 (35 mm)

E-TTL flash mode

Four thirds TTL flash mode

ADI flash mode

Firmware update via Metz Service 2 x AA alkaline-magnesium or lithium batteries 2 x AA NC or NiMH rechargeable batteries
The unique special feature of Metz SCA flash units is that one and the same flash unit can be used with different cameras it doesnt matter whether they are digital or analog. By simply replacing the adapter, system cameras from different manufacturers can be used, because they offer the richest array of special functions. Flash units with SCA adapters are just as suitable for system camera owners as for medium-format camera owners. All members of the SCA family meet this criteria, whether it is a handheld flash gun or a compact flash.

A second look

Many wedding photographs are exclusively standard poses. Anyone who comes up with additional ideas here can score bonus points. Why not photograph the bridal couple or wedding guests during small talk? With some flash, the subject is given additional sharpness and brilliance. For this purpose, there are different partial light output levels to choose from with Metz handheld flash guns.

high max. GN of 45 for ISO 100/21 and 35 mm
SCA adapter system (flash unit useable with different cameras) socket for SCA 3045 digital cable (to connect to SCA adapter on camera shoe) secondary reflector with 3 lighting levels vertical (+90) and horizontal (360) tilt reflector LED displays standard 35 mm illumination accompanying wide-angle diffuser for 28 mm illumination integrated auto-focus measurement flash (only via connection cable SCA 3045) flash readiness and exposure control indicators on the unit and camera (subject to camera) flash range indicator in LED (for manual settings)
TTL flash mode automatic flash mode with 6 automatic apertures manual flash mode with 5 partial lighting levels HSS high speed synchronization (subject to camera) 1st and 2nd shutter curtain synchronization (subject to camera) manual flash exposure correction for TTL flash mode (subject to camera) automatic fill-in flash

IN DETAIL

Secondar y reflector
SCA 3002 adapter with SCA 3045 cable
GN of 45 at ISO 100/21 (35 mm)
45 CL-4 DiGITAL BASIC Digital
Wide-angle diffuser Sync cable Camera bracket Empty battery basket 45-39

45 CL-4 DIGITAL KIT

Wide-angle diffuser Connection cable SCA 3045 digital Camera bracket NiMH rechargeable battery and charger
Four Thirds TTL flash mode

P-TTL flash mode

ADI flash mode ADI remote mode (slave function) firmware update possible via Metz Service
Metz NiMH rechargeable battery 45-56 (included with kit version) powerful Metz NiMH Power Pack P 76 with V 76 cable alkaline-magnesium batteries (Battery basket 45-39 required separately; already included with BASIC version)

NiMH charger set B46

Batter y basket 45-39
Mecabounce 45-90 for softer illumination (Fig. similar)
m e c a b l i t z M Z - 4 i d igi ta l

For semi-professionals

Especially versatile: Presenting the simple and highly functional flagship of the Metz SCA compact flash units. It is convincing due to the: High light output: GN of 54 at ISO 100/21 and 105 mm focal length. Large light angle: illumination of a focal length range of 24-105 mm. switch-controlled secondary reflector, with light output that can be reduced by using a grey filter. Ease of use: a large display ensures you always have a good overview. Only two function keys and a control dial facilitate good handling. Great flexibility: To begin with, the Metz 54 MZ-4i digital is available with a standard foot. Furthermore, due to the SCA system, there are many adapters available for almost any camera. Diversity: Via various adapters, there are also a great deal of interesting special functions such as E-TTL and E-TTL II flash mode from Canon, i-TTL from Nikon, or ADI flash control from Sony Alpha, and many more, which increase the creative flexibility.

Fill-in flash

Backlighting makes interesting light effects possible, if you know how to use it correctly. A flash should be used in any case. With the flash output reduced by 1 or 2 f-stops, it is possible to retain the character of the existing light. The higher the guide number, the greater the range of the flash unit. However, when comparing, it is important to make sure that the same focal length and the same ISO specification are used.

Long exposure times

It is worth experimenting with exposure times that are longer than the flash sync speed. For moving objects, interesting blurring effects and a corresponding brightening of the foreground can be obtained in a range of approx. 1 second. By the way, the easiest way to extend the range of a flash unit is to increase the ISO setting on the camera. To be set at 1600 ISO instead of 100 thus quadrupling the range of the flash unit.

mecablitz 36 C-2

For beginners
connection to camera via hot-shoe contact (x-synchronization) or via sync cable (included in delivery) vertically tilting reflector +90 LED displays manual zoom reflector for mm illumination flash readiness and exposure control indicator on the unit
automatic flash mode with 3 automatic apertures manual flash mode

standard sync cable

Reliable: Those who are looking for a precise automatic flash with a tilting reflector unit will be well-served by the mecablitz 36 C-2. It offers three different automatic apertures (8, 4, 2, at ISO 100/21) as well as a manually
adjustable zoom reflector, with which the light output can be optimized within the focal length of 28 - 85 mm. LED displays on the back of the unit give information about the flash readiness and correct exposure.

Zoom reflector (28-85mm)

Standard sync cable 36-50
Camera bracket 40-36 Spiral sync cable 36-52

mecablitz 20 C-2

For price-conscious beginners
Small, but look out: This is an ideal complement for everyone who loves compactness and doesnt want to go without good flash photos. The smallest compact flash unit currently available from Metz is clearly more effective than the flash integrated into the camera. The mecablitz 20 C-2 with GN 20 at ISO 100/21 and 35 mm focal length is intended for all those who prefer a flash which will also fit into your jacket pocket. This small, chic model offers two automatic apertures. And the special key feature is the swivel reflector! LED displays on the back of the unit provide information about the flash readiness and also the correct exposure.
max. GN of 20 for ISO 100/21 and 35 mm
connection to camera via hot-shoe contact (x-synchronization) or via sync cable (included in delivery) vertically tilting reflector +90 LED displays flash readiness and exposure control indicator on the unit

Creative at close range:

Correct lighting is of particular importance in the macro range. The Metz macro flash 15 MS-1 digital is especially suited for this. Due to its positioning directly on the lens the light cannot fail to reach its destination. With its ring form and completely wireless functionality, the new Metz flash unit is excitingly attractive. Special light accents and a variety of lighting options are also possible thanks to adjustable reflectors. Thus, directed light can be adjusted in terms of contrast and brightness. In the slave mode, the Metz mecablitz 15 MS-1 can also be used to effectively lighten shadowed areas of pictures.
m e c a b l i t z C s - 2 d igi ta l

For the imaginative

Flash with a fun factor: Have you ever been upset due to photographs that are too dark, because the integrated flash in your camera was once again inadequate? Wouldnt you like to have a handy flash unit that can also be used separate from the camera once in a while? Then Metz has the perfect solution for you! Let the curtain rise for the Metz mecablitz 28 CS-2 digital, with technology and a size that have been optimally matched to compact digital cameras. The fun factor is increased by the self-learning servo mode and the smart EASY mode. For the very first time the flash result can be directly manipulated via the immediate correction buttons (+/-). Simply shoot, check the result on the camera screen and adjust straight away as required all at the touch of a button. Thanks to this servo model you can increase your flash power without any undesired side effects. The compact tool draws its power from either universally available alkaline micro batteries or equally competitive rechargeable micro batteries.
max. GN of 28 for ISO 100/21 and 85 mm
Servo mode: flash unit exposure via built-in camera flash or additional external flash unit LCD display flash readiness and exposure control indicator on the unit flash range indicator in the LCD illumination from 24 mm (wide-angle diffuser) up to 85 mm (telephoto attachment) automatic unit switch-off
automatic flash mode with 8 automatic apertures manual flash mode with 4 partial lighting levels Easy Mode: manual exposure correction with +/- buttons
Easy control with the +/- buttons

Clearly laid out display

Perfect for mounting on the integrated, extendible telescopic bracket
GN of 28 at ISO 100/21 (85 mm) GN of 22 at ISO 100/21 (35 mm)
Learning mode: optimum adaptation of the flash unit to the camera-specific pre-flash only once at the beginning Metz-specific TTL remote mode (slave mode) with other Metz flash units as the master

Dot-matrix display

Wireless TTL flashes

3-stage swivel reflector

Bouncer disk included makes for softer lighting.
GN of 15 at ISO 100/21 (50 mm)
Camera-specific flash modes
Wireless TTL flash control, remote slave mode available for:
E-TTL / E-TTL II flash mode

Olympus

RC system

DSLR remote flash mode

Firmware update via integrated USB socket Integrated power supply via 2 x AAA (micro) alkaline magnesium batteries (1.5V) 2xAAA (Micro) NiMH/NC rechargeable batteries (1.2V) 2xAAA (micro) lithium batteries (1.5V)

Accessories included

Bounce diffuser Adapter ring 52 mm, 55 mm, 58 mm IR filter bracket Belt pouch
Bouncer dif fuser (included)
Adapter rings (52, 55, 58mm) and IR brackets (included)

Belt pouch (included)

Adapter rings (62, 67, 72mm) (optional extra)
* With respective remote slave operation

Q u ick s e a r c h

CANON Analog EOS cameras (except EOS 300X) Digital cameras NIKON Analog AF-SLR cameras Digital cameras FUJIFILM S7000, S9500, S9600, S100FS, S200EXR, HS10 HASSELBLAD 6x6 LEICA R4, R4s, R5, R6, R6.2, R7, RE MAMIYA 645 Pro TL OLYMPUS C-770, C-8080, SP-350, SP-570 UZ, E-Serie, Pen E-P1, Pen E-P2, Pen E-PL1 PANASONIC DMC-FZ20, DMC-FZ30 PENTAX DSLR ROLLEI 2,8GX, 6008 SAMSUNG GX-10, GX-1L, GX-1S, GX-20 SONY Alpha SCA 3302 SCA 3302 SCA 3302 + SCA 3045 SCA 3702 SCA 3702 SCA 3702 + SCA AF, Hy6 SCA 356 + SCA 300 D SCA 3562 SCA 356 SCA 3562 SCA 356 + SCA 300 A SCA 3562 + SCA 3045 SCA 3702 SCA 3702 SCA 3702 + SCA 3045 DMC-LC 1 DMC-FZ50, DMC-L1, DMC-L10, DMC-LX3, DMC-G1, DMC-GH1, DMC-G10, DMC-GSCA 3502 SCA 3202 SCA 300A + SCA 301 SCA 3502 M5 SCA 3202 SCA 300A + SCA 301 SCA 3502 M5 + SCA 3045 SCA 3202 + SCA 3045 SCA 3202 SCA 3202 SCA 3202 + SCA AF, ZD SCA 396 + SCA 300 E + 50-35 SCA 3952 SCA 396 SCA 3952 SCA 396 SCA 3952 + SCA 3045 R8, R9, M6 TTL, M7, M8, Digilux 2, CM, M8.2, M9 Digilux 1 Digilux 3, V-Lux 1, D-Lux 4 SCA 351 SCA SCA 3202 SCA 351 SCA 3502 SCA 300A + SCA 301 SCA 3202 SCA 351 + SCA 300 A SCA 3502 + SCA 3045 SCA 300A + SCA 301 SCA 3202 + SCA 3045 H1, H2, H3, H4 SCA 390 SCA 3902 SCA 390 SCA 3902 SCA 390 + SCA 300 A SCA 3902 + SCA 3045 S1 Pro, S2 Pro, S5 Pro S3 Pro 301 SCA 3402 SCA 3402 SCA 300A + SCA 301 SCA 3402 SCA 3402 SCA 300A + SCA 301 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 (except F6) F6 DSLR (except D100, D1x, D2x, D2h) D100, D1x, D2x, D2h Coolpix 8400, 8800, P5000, P5100 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 SCA 3402 + SCA 3045 DSLR Power Shot G6, G7, G9, S5 IS, G10, G11, SX1 IS, SX10 IS, SX20 IS SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 SCA 3102 + SCA 3045 SCA 3102 + SCA 3045 SCA 3102 + SCA 3045

Regarding your type of camera, also take note the SCA packaging imprint and the M version of the adapter. For current versions of the flash units or alternatively the adapters, see www.metz.de.

45 CL-4 digital Basic

45 CL-4 digital kit inCl. SCA 3045

76 MZ-5 digital

58 AF-2C 58 AF-2C 58 AF-2C
SCA 3102 SCA 3102 SCA 3102
50 AF-1C 50 AF-1C 50 AF-1C
44 AF-1C 44 AF-1C 44 AF-1C
36 AF-5C 36 AF-5C 36 AF-5C
24 AF-1C 24 AF-1C 24 AF-1C
58 AF-2N 58 AF-2N 58 AF-2N 58 AF-2N 58 AF-2N
SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402
50 AF-1N 50 AF-1N 50 AF-1N 50 AF-1N 50 AF-1N
44 AF-1N 44 AF-1N 44 AF-1N

36 AF-5N 36 AF-5N

24 AF-1N 24 AF-1N 24 AF-1N

44 AF-1N

36 AF-5N

58 AF-2N 58 AF-2N

301 SCA 3402 SCA 3402
50 AF-1N 50 AF-1N 44 AF-1N

36 C-AF-5N

20 C-AF-1N

SCA 390 + 40-36 SCA 3902

58 AF-2O

SCA 351 SCA SCA 3202

50 AF-1O 44 AF-1O

36 C-AF-5O

20 C-AF-1O
SCA 396 + SCA 300 E + 40-36 SCA 3952

58 AF-2O

SCA 3202

50 AF-1O

44 AF-1O

36 AF-5O

24 AF-1O

58 AF-2O

301 SCA 3502 SCA 3202

50 AF-1O 44 AF-1O

36 C-AF-5O

20 C-AF-1O

58 AF-2P

SCA 3702

50 AF-1P

44 AF-1P

36 AF-5P

24 AF-1P

58 AF-2P
SCA 356 + SCA 300 D SCA 3562 SCA 3702

50 AF-1P 44 AF-1P

36 AF-5P

24 AF-1P

58 AF-2S

SCA 3302

50 AF-1S

44 AF-1S

36 AF-5S

24 AF-1S

28 CS-2 DIGITAL is suitable for compact cameras of all brands with an integrated flash
* The following operating modes are available, depending on camera configuration: - Remote TTL slave - Servo with or without pre-flash suppression - Manual mode via sync cable Please follow the operating instructions. Consult www.metz.de for more information

15 MS-1 Digital*

54 MZ-4i digital

24 AF-1/20 C-2

58 AF-2 digital

50 AF-1 digital

36 AF-5/36C-2

44 AF-1

36 C-2

Configuration features: Flash output GN for ISO 100 and 35 mm or 50 mm GN for ISO 100 and max. zoom Basic configuration Adapter system SCA 300 Adapter system SCA 3002 Illumination from. mm (KB format) Motor zoom main reflector Manual zoom main reflector Extended zoom mode for main reflector Main reflector can be tilted and rotated Vertical tilting range in Horizontal swiveling range in Integrated wide-angle diffuser for illumination in mm (KB format) Attachable wide-angle / telephoto / bounce diffuser lens cover Integrated reflector card for main reflector Secondary reflector / partial lighting levels (manually adjustable) Secondary reflector support for system flash functions Dot matrix display / illuminated LCD display / illuminated LED displays Range display Flash readiness indicator / exposure control indicator on the flash unit Acoustic status messages (beep) Modelling light function Manual key lock (KEYLOCK) Automatic unit switch-off (auto off) Wake-up function by the camera Automatic AF measurement flash / multi-zone AF measurement flash AF auxiliary light Metz remote flash mode (master/slave) Standard flash modes TTL flash mode (without pre-flash) Automatic flash mode (f-stops) EASY Mode flash mode Manual flash mode Partial lighting levels
Servo flash mode 7) (without pre flash suppression/with pre flash suppression/learning function)

20 / +90 270

20 C-2

35 / +90 / (2)

T e c h n ic a l d ata

20 / 270 20

12 /

28 / +90

/ +90 360

/ 300 12

/ +90

7. +90 7. +90 7. +90

/2 / / / / / / (12) 25 /4) /

7) 2) 1)

/ / / / / /

/ / / /

/ / / / / / / / /

(12) 25

(3) (8) 4

(6) 5

/2) / / /

/4) / / /

Stroboscope flash mode System flash functions Automatic fill-in flash Flash-ready indication in camera viewfinder Exposure control indication in camera viewfinder 1st and 2nd shutter curtain synchronization High-speed synchronization (HSS or FP) Manual flash exposure correction Manual flash bracketing Pre-flash function against the red eye effect

15 MS-1 Digital

28 CS-2 digital

44 AF-1 digital

36 AF-5 digital

24 AF-1 digital

45 CL-4 digital BASIC / KIT
Configuration features: System flash modes Cannon E-TTL- / E-TTL-II flash mode Canon FE flash exposure memory for E-TTL and E-TTL-II flash mode Canon E-TTL remote flash system as master/controller/slave Leica group number control (GNC) Nikon 3D multi-sensor fill-in flash mode Nikon D-TTL / 3D flash mode

0,3/2,5 0,1/3

148 99

125 108

137 99

128 105

115 95

110 87

140 75.32.5

144 38

1) With connecting cable SCA 3045 2) With slave adapter SCA 3083 digital and connecting cable SCA 3045 3) With battery case 45-39 4) With slave adapter SCA 3083 digital 5) Running on micro-cells (AAA): NiMH (1000 mAh) 6) With SCA 3045 (subject to camera) 7) subject to camera

54 MZ-4i

45 CL-4 digital BASIC

45 CL-4 digital KIT

58 AF-1/-2 digital
50 AF-1 digital/ 48 AF-1 DIGITAL

Acc e s s o r i e s

Rechargeable batteries and battery case NiMH rechargeable batteries 45-56 NiMH rechargeable batteries 76-56 Battery basket without batteries 45-39 Charging sets and chargers NiMH charger set B 46 NiMH charger set B 47 Power packs and accessories Power Pack P 76 Set (incl. charger) Connecting cable V 76 (for P 50 / P 76) Connecting cable V 58-50 (for P 50 / P 76) Connecting cable V 54-50 (for P 50 / P 76) Connecting cable V 50 (for P 50 / P 76) mecabounce mecabounce 44-90 mecabounce 52-90 mecabounce 50-90 mecabounce 45-90 mecabounce 58-90 Sync cables Standard sync cable 15-50 Spiral sync cable 36-52 Spiral sync cable 45-49 Standard sync cable 36-50 (25 cm) Standard sync cable 45-47 (40cm) Standard sync cable 45-48 (100cm) Camera brackets and accessories Camera bracket 40-36 Camera bracket 32-38 Bracket adapter 60-28 Mounting bracket for control unit 50-35 Bracket plate for medium format 70-35

1) 1)

36 AF-4/36 AF-5

24 AF-1 digitaL

Bounce diffusers Bounce diffuser 54-23 (or 58-23) Bounce diffuser 76-23 mecalux mecalux 11 Camera straps Camera straps 50-31 Connecting cable SCA 3008 A for SCA 3002 adapter SCA 307 A for SCA 300 adapter SCA 3045 for SCA 300/3002 adapter SCA 300 A for SCA 300 adapter Adapters SCA 356 for Rollei 4) SCA 390 for Hasselblad 4) SCA 3102 for Canon SCA 3202 for Olympus / Panasonic / Leica SCA 3302 for Konica Minolta / Sony SCA 3402 for Nikon SCA 3502 for Leica SCA 3562 for Rollei 4) SCA 3702 for Pentax SCA 3902 for Hasselblad 4) SCA 3952 for Mamiya 4) SCA 3083 digital slave adapter SCA 300 E Standard foot 301 Lens adapter rings 62mm adapter ring 67mm adapter ring 72mm adapter ring

5) 5) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2)
5) 5) 2) 2) 2) 2) 2) 2) 2) 2) 2) 2) 5)

1) = Standard foot 301 required 2) = SCA 3045 required 3) = SCA 300 D required 4) Can be obtained from the reseller partners of the camera manufacturer 5) = SCA 300 A or SCA 3045 required
TE C HN I C AL G LOSSAR Y
A AF measurement flash An autofocus auxiliary light (AF measurement flash) integrated in the flash unit automatically supports the central autofocus sensor of the camera in the event of low ambient light. For a multi-zone AF measurement flash, the decentralized AF sensors are supported in the process. Automatic unit switch-off During extended breaks from photographing, the flash unit is switched automatically to an energy-saving standby state to prevent the power source from discharging (Auto-Off). Through the wake-up function, the flash unit is reactivated, for example when the shutter release is actuated. Automatic flash mode A photo sensor integrated in the flash unit measures the subject during photographing, and automatically terminates the light output as soon as the subject is correctly exposed. B Buzzer Additional acoustic status messages can be activated for flash readiness, flash exposure control as well as warning tones. C Correct exposure indication The correct exposure indication OK is shown on the flash unit after the photograph if the subject in automatic or TTL flash mode was correctly exposed.

Manual zoom The zoom position of the main reflector and thus the illumination of the flash unit can be adjusted manually to the lens focal length. Metal stand High quality metal base for secure attachment on camera shoe.
Modeling light Modeling light is a stroboscope light with a high flash frequency lasting a few seconds. With this quasi permanent light, the light dispersion and shadow formation at the subject can be checked before taking the photograph. Motor zoom The zoom position of the main reflector and hence the illumination of the flash unit can be adjusted automatically to the lens focal length. P Partial light mode Manual flash mode with unregulated light output. By setting partial light mode on the flash unit, the light output or illumination duration of the flash unit can be adapted specifically to the photographic situation.
S SCA 3002 adapter system For system cameras with digital or analog data transmission between the camera and flash unit. By using an SCA adapter from the SCA 3002 system, there are numerous additional system flash functions available with flash units from the SCA 3002 system, depending on the type of camera. The firmware of an SCA adapter from the SCA 3002 system is updateable via Metz service for future cameras. The SCA 3002 adapters are an updated version of the SCA 3000 system. SCA 300 adapter system For system cameras for adaptation to flash units of the SCA 3002 or SCA 300 system. Depending on the type of camera, not all system flash functions are supported by the SCA 300 system. Secondary reflectorr
Swivel reflector Can be tilted horizontally and vertically for indirect flash. Can be tilted vertically for indirect flash. T TTL flash control While taking the photograph, the flash light is measured through the lens (TTL = through the lens) by a sensor in the camera. The light output of the flash unit is terminated as soon as the subject is correctly exposed. TTL fill-in flash control Reduces too high subject contrast (e.g. to brighten dark shadowy areas in bright sunshine). U USB Interface for firmware updates via the Internet. W Wake-up The flash unit can be reactivated by actuating the shutter release if the flash is in energy-saving standby mode after an extended break from taking photographs. (>>> Automatic unit switch-off) Wide-angle attachment To brighten shadows cast in the
P-TTL Modern further development of the TTL flash control with measurement pre-flash technique for Pentax cameras.
close-up ranges which appear when using an indirect flash. Servo mode
R REAR Synchronisation to the 2nd shutter curtain for more natural blurring effects for longer exposure times. Remote operation A remote system consists of a master or controller flash unit on the camera and one or more slave flash units. The slave flash unit is remotely controlled wirelessly by the master or controller flash unit. With a master flash unit, the flash light contributes to the exposure, in contrast to a controller flash unit.

The servo mode allows you to operate the Metz flash unit of the corresponding camera system wirelessly with the built-in flash unit on the digital camera. Allows light output to be calibrated as partial lighting. Slave mode An integrated sensor makes this wireless slave flash mode possible in combination with a master or controller flash unit. (>>> Remote operation) Z Sony / ADI Modern further development of the TTL flash control for Sony Alpha and Konica-Minolta cameras in which, for example, the data for distance to the subject must be put into the flash exposure in addition. Stroboscope mode Manual flash mode for flash sequences with a selectable intensity, frequency, and number of flashes, e.g. for special effect photos and motion studies.
Increases the light angle of the flash unit. Depending on the type of flash unit, the wide-angle attachment is either integrated or attachable as an accessory.
Zoom size Automatic adaptation of the display of the reflector position of the flash unit to the picture-taking chips for digital cameras.
Metz Quality made in Germany Core competencies in the fields of consumer electronics, photo electronics, and plastics engineering form the basis of the excellent worldwide reputation of Metz-Werke.
Your authorised Metz dealer
Metz-Werke GmbH & Co KG P. O. Box 1267 D-90506 Zirndorf/Germany Fon: +49 (0) 911 - 97060 Fax: +49 (0) 911 - 9706340 www.metz.de info@metz.de Subject to delivery options and changes. P135XGB Printed in Germany 8/2010
Metz immer erstklassig always first class.