P r o d u c t Fa mi l i e s
With Metz mecablitz digital into the future
The flexibility of Metz mecablitz units can be seen within the different flash families. They have the respective functionality to meet varying requirements. In principle, there are the following groups:

System flash units

With System flash units, using a flash is a great deal of fun. Thanks to them being highly-developed and fully automatic, you only have to attach the flash, and away you go. System flash units are available in different versions. In this way, they provide a specific connection for a specific brand of camera, with which they work together perfectly. Set the appropriate TTL control and guarantee perfect illumination for any ambient lighting conditions. Since requirements differ, there are five different models for each level of experience.

SCA flash units

Cameras can change, Metz can adapt! The unique special feature of Metz SCA flash units is that one and the same flash unit can be used with different cameras it doesnt matter whether they are digital or analog. By simply replacing the adapter, system cameras of different manufacturers can be used. Flash units with SCA adapters are particularly good for reflex cameras, because they offer the richest array of special functions. Of course, the SCA modules are also suitable for cameras from many other manufacturers, because of the adapters available.

Automatic flash units

Automatic flash units are connected to the camera via a hot-shoe contact or a sync cord connection and have their own automatic flash control. This means that it isnt the camera that controls the flash, rather the flash itself responds intelligently and meters the light as precisely as required by the subject. Automatic flash units are available in manageable compact flash format in guide number classes 36 and 20. Automatic flash units are particularly suitable for digital bridge cameras with simple hot shoe flash.

Slave/servo flash units

The range of slave/servo flash units is designed to achieve extremely varied, interesting lighting effects. This is because they can be used as so-called off-camera flashes, because they can be positioned anywhere in the room. Because they dont need a direct contact to the camera, they are especially interesting for owners of compact digital cameras that dont have a flash connection option. The macro-flash mecablitz 15 MS-1 digital is regarded as an innovation. Its wireless TTL* control makes it unique in its class. Even the mecablitz 58 AF-2 digital, 50 AF-1 digital or the 44 AF-1 digital can be used as a slave, even though they are not directly assigned to this category. In this mode of operation, they also support the flash modes of the respective camera manufacturer.

Included in delivery

belt case slave mounting foot

Accessories

Power Pack P 76 Set (V58-50 cable required)
Mecabounce 58-90 for softer illumination (Fig. similar)
Bounce diffuser 58-23 for bounce flash
m e c a b l i t z AF - 1 d igi ta l
For committed amateur photographers
High performance and future-proof The successor to the Best Accessory Tipa 2008 award-winning mecablitz 48 AF-1 digital has been launched with a new high quality metal base which allows quick and easy attachment to the respective camera. The mecablitz 50 AF-1 digital has all the right technological features too, including numerous application possibilities and even higher performance levels (guide number 50). Equipped with a USB interface for online firmware updates, its innovative and future-proof credentials are proven. It is available in five versions, each one perfectly tailored to a digital camera by one of the leading manufacturers (Canon, Nikon, Olympus/Panasonic, Pentax or Sony ADI) all of which are rapid response due to their fully automatic flash modes. These permit precise light output tailored to each individual subject. Numerous manual fine tuning options extend your creative photographic freedom. Virtually limitless possibilities are opened up for creative lighting thanks to a fully swivelling reflector system which also contains a flip-out reflector card and a diffuser. The slave function allows the 50 AF-1 digital to be used without constraints. In the respective cameraspecific wireless TTL mode it can even be used as a slave device. With built-in camera flash, wireless applications are available in servo mode. A superb flash unit for committed amateur photographers.
high max. GN of 50 for ISO 100/21 and 105 mm
vertical (-7/+90) and horizontal (300) swivel reflector illuminated LCD display easy operating concept motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 12 mm illumination extendible reflector card for soft flash illumination modeling light (permanent light for checking the photo) integrated autofocus measuring flash Flash readiness indicator and correct exposure display on unit and camera (subject to camera) flash range indicator in the LCD display automatic unit switch-off and manual key lock Metal base* with quick lock
TTL flash mode manual flash mode with 8 partial lighting levels HSS high speed synchronization 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL flash mode automatic fill-in flash flash bracketing

* excludes Sony model

Detail metal base*

USB por t

GN of 50 at ISO 100/21 (105 mm) GN of 36 at ISO 100/21 (50 mm)
E-TTL- / E-TTL-II flash mode E-TTL remote mode (Slave and servo mode)
i-TTL / D-TTL / 3D flash mode i-TTL remote mode (Slave and servo mode)
Four Thirds TTL flash mode Four Thirds TTL remote mode (Slave and servo mode)
P-TTL flash mode P-TTL remote mode (slave operation)
ADI flash mode ADI remote mode (slave operation)
Guaranteed in the future Power sources
4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries
Firmware update via integrated USB port
For price-conscious amateur photographers
Compact high performance With its slim-line design and new quick lock system for the unit base, the mecablitz 44 AF-1 digital is the perfect solution for price-conscious amateur photographers. The clear control panel on the back of the unit impresses with its simple operation; offering a high level of functional reliability. The high performance design affords reserve power in any photo situation (max. guide number 44 for ISO 100/21 and 105 mm). Depending on the camera, it has the appropriate application possibilities for any lighting conditions in TTL mode. The photographer can manually set up to 4 partial light levels enabling manipulation of lighting effects. With the appropriate camera model the mecablitz can also be synchronised to the first or second shutter curtain enabling variable options for creative lighting. Depending on the camera, the Metz 44 AF-1 also offers a slave mode, making wireless TTL flash childs play and opening up new dimensions in flash photography. Its motor zoom function (24 -105 mm), the fully swivelling reflector with flip-out reflector card and the integrated wide-angle diffuser (12 mm) afford the photographer additional creative scope.
Max. guide number 44 for ISO 100/21 and 105 mm
Vertical (+90) and horizontal (300) swivel reflector Simple operating concept Motor zoom for mm illumination Integrated wide-angle diffuser for 12 mm illumination Flip-out reflector card Modelling light (permanent light for checking the image (subject to camera)) Integrated auto focus flash metering Flash readiness indicator and correct exposure display on the unit and camera (subject to camera) Automatic unit shut-off
TTL flash mode Manual flash mode with 4 partial lighting levels Slave mode: remote mode in camera-specific mode, exposure via built-in mastering camera flash or an additional external flash unit (master mode) First and second shutter curtain synchronisation (subject to camera) Manual flash exposure correction for TTL flash mode (subject to camera) Automatic fill-in flash

Flip-out reflector card

Swivel reflector

Simple operation

USB inter face
GN of 44 at ISO 100/21 (105 mm) GN of 32 at ISO 100/21 (50 mm)
E-TTL / E-TTL II flash mode E-TTL remote mode (slave mode)
CANON NIKON FUJIfilm (i-TTL) OLYMPUS PANASONIC PENTAX SONY
i-TTL / i-TTL BL i-TTL remote mode (slave mode)
Four thirds TTL flash mode Four thirds TTL remote mode (slave mode)
P-TTL flash mode P-TTL remote mode (slave mode)
ADI flash mode / pre-flash TTL ADI remote mode (slave mode)
Ready for the future Power supply
Firmware update via integrated USB socket 4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries
Mecabounce 52-90 for softer illumination (Fig. similar)
Reflector umbrella 58-23 for bouncing flash
m e c a b l i t z AF - 5 d igi ta l

For demanding beginners

The compact class Presenting the Metz mecablitz 36 AF-5C digital for Canon, 36 AF-5N digital for Nikon, 36 AF-5O digital for Olympus and Panasonic, 36 AF-5P for Pentax and 36 AF-5S for Sony Alpha, in the smart Cobra design. With these sophisticated entry-level models Metz has just the right flash solution for these digital camera user groups. In addition, they are impressive because of their easy operation. Even bounce flash becomes childs play, due to the vertically-tilting reflector. The manuallyadjustable zoom reflector has other advantages. By adjusting the reflector to different focal lengths, the illumination angle of the 36 AF-5 digital can be optimally utilized.
max. GN of 36 for ISO 100/21 and 85 mm
vertically tilting reflector +90 LED displays manual zoom reflector for 28 - 85 mm illumination integrated autofocus measurement flash flash readiness and exposure control indicators on the unit and camera (subject to camera) 18 mm diffuser included in delivery Automatic unit shut-off
TTL flash mode First and second shutter curtain synchronisation (subject to camera) Manual flash exposure correction via TTL flash mode (subject to camera) automatic fill-in flash
Spotlight for AF measurement flash
Tilt reflector (only vertical)
Zoom reflector (28-85 mm)
Wide-angle adapter (18 mm)
GN of 36 at ISO 100/21 (85 mm) GN of 30 at ISO 100/21 (50 mm)

E-TTL flash mode

i-TTL flash mode
Four Thirds TTL flash mode

P-TTL flash mode

ADI flash mode firmware update possible via Metz Service
4 x AA alkaline-magnesium batteries 4 x AA NC or NiMH rechargeable batteries

Perfect travel companion

The new mecablitz 24 AF-1 digital is perfect when youre on the go. Thanks to the compact, slim-line and lightweight design it can be stashed easily in a jacket pocket and is at hand just when you need it. Currently the smallest Metz system flash unit with GN 24 for ISO 100/21 and 35 mm focal length, it is particularly suited to flash novices who are looking for better illumination in their photos than is possible with an integrated camera flash. Thanks to intelligent TTL camera control the mecablitz 24 AF-1 digital even makes automatic fill-in flash possible. Additional illumination levels are also possible thanks to the 90 adjustable swivel reflector. Flash readiness and exposure levels are displayed on the back of the unit by two LED indicators.

Max guide number 24 for ISO 100/21 and 35 mm
Vertical swivel reflector +90 LED display Integrated autofocus flash metering Flash readiness and correct exposure display on unit and camera (subject to camera)
TTL flash mode First and second shutter curtain synchronisation (subject to camera) Manual flash exposure correction for TTL flash mode (subject to camera) Automatic fill-in flash
Beam for AF flash metering
Swivel reflector (vertical)
GN of 24 at ISO 100/21 (35 mm)

E-TTL flash mode

Four thirds TTL flash mode

ADI flash mode

Firmware update via Metz Service 2 x AA alkaline-magnesium or lithium batteries 2 x AA NC or NiMH rechargeable batteries
The unique special feature of Metz SCA flash units is that one and the same flash unit can be used with different cameras it doesnt matter whether they are digital or analog. By simply replacing the adapter, system cameras from different manufacturers can be used, because they offer the richest array of special functions. Flash units with SCA adapters are just as suitable for system camera owners as for medium-format camera owners. All members of the SCA family meet this criteria, whether it is a handheld flash gun or a compact flash.

A second look

Many wedding photographs are exclusively standard poses. Anyone who comes up with additional ideas here can score bonus points. Why not photograph the bridal couple or wedding guests during small talk? With some flash, the subject is given additional sharpness and brilliance. For this purpose, there are different partial light output levels to choose from with Metz handheld flash guns.

Perfectly-equipped

Tough professional use requires the maximum flash power. The new, practical, high-power Power Pack P 76, which attaches to your belt, provides even more energy. This increases flash output, while simultaneously reducing the flash recycle time. This is a dramatic improvement, which makes it possible to fall back on maximum flash power when taking a battery-draining series of shots.
m e c a b l i t z M Z - 5 d igi ta l

Light power for pros

Powerful handheld flash guns Worldwide, professional photographers put their trust in the powerful 76 MZ-5 digital from Metz. Above all at weddings and fashion shows, its ability to take fast series of shots pays off. Its secondary reflector which makes it possible to set perfect highlights in the eye is worth its weight in gold. It goes without saying that the camera-specific system flash modes of the various manufacturers can also be used perfectly with this professional flash, through different SCA adapters.All menu navigation settings can be activated from the device itself, and a locking function means you wont accidentally change fixed values. Of course, the 76 MZ-5 digital keeps up with the times and provides outstanding flash convenience with a great deal of creative flexibility in setting up shots. Discriminating photographers will appreciate the lasting flash performance ensured by the NiMH rechargeable battery and the Metz charger. It offers considerably more power than the previous NiCad rechargeable battery. The control unit of the 76 MZ-5 digital is specially equipped with a large, illuminated dot matrix display. Plus, the reflector of the zoom flash unit automatically adapts to a focal length range of 24 - 105 mm depending on the type of camera. A wide-angle diffusing disk, included with the flash, enables expansion to 20 mm.

high max. GN of 54 for ISO 100/21 and 105 mm
SCA adapter system (flash unit useable with different cameras) secondary reflector vertical (-7/+90) and horizontal (270) tilt reflector illuminated LCD display easy operating concept motor zoom for 24 - 105 mm illumination integrated wide-angle diffuser for 20 mm illumination modeling light (permanent light for checking the photo) integrated autofocus measurement flash flash readiness and exposure control indicators on the unit and camera (subject to camera) flash range indicator in LCD automatic unit switch-off and manual key lock

Standard Flash Modes

TTL flash mode automatic flash mode with 12 automatic apertures manual flash mode with 25 partial lighting levels stroboscope mode HSS high speed synchronization (Canon, Sony, Nikon analog, Leica) 1st and 2nd shutter curtain synchronization manual flash exposure correction for TTL or automatic flash mode automatic fill-in flash flash bracketing
Secondar y reflector with attachable reduction filter
2 function keys, 1 control dial
GN of 54 at ISO 100/21 (105 mm) GN of 40 at ISO 100/21 (50 mm)
ADI flash mode ADI remote mode (slave function)
4 x AA alkaline-magnesium or lithium batteries 4 x AA NC or NiMH rechargeable batteries powerful Metz NiMH Power Pack P 76 with V 54-50 cable
Light reduction filter Bag Standard foot
Power Pack P 76 (V 54-50 connection cable required)
Connecting cable SCA 3008A with SCA 3002 adapters and camera bracket 40-36
SCA 3083 digital slave adapter
Mecabounce 44-90 for softer illumination (Fig. similar)
A u t o m at ic f l a s h u n i t s
The flash units in this family dont have TTL flash mode; instead, they have the so-called automatic flash mode, in addition to manual flash mode. Numerous photographers still make use of this simple but extremely effective form of flash measurement. With automatic flash mode, it isnt the camera that controls the flash, but instead, the photocell integrated in the flash measures the light reflected from the object. It is a really nice thing!

Fill-in flash

Backlighting makes interesting light effects possible, if you know how to use it correctly. A flash should be used in any case. With the flash output reduced by 1 or 2 f-stops, it is possible to retain the character of the existing light. The higher the guide number, the greater the range of the flash unit. However, when comparing, it is important to make sure that the same focal length and the same ISO specification are used.

Long exposure times

It is worth experimenting with exposure times that are longer than the flash sync speed. For moving objects, interesting blurring effects and a corresponding brightening of the foreground can be obtained in a range of approx. 1 second. By the way, the easiest way to extend the range of a flash unit is to increase the ISO setting on the camera. To be set at 1600 ISO instead of 100 thus quadrupling the range of the flash unit.

mecablitz 36 C-2

For beginners
connection to camera via hot-shoe contact (x-synchronization) or via sync cable (included in delivery) vertically tilting reflector +90 LED displays manual zoom reflector for mm illumination flash readiness and exposure control indicator on the unit
automatic flash mode with 3 automatic apertures manual flash mode

standard sync cable

Reliable: Those who are looking for a precise automatic flash with a tilting reflector unit will be well-served by the mecablitz 36 C-2. It offers three different automatic apertures (8, 4, 2, at ISO 100/21) as well as a manually
adjustable zoom reflector, with which the light output can be optimized within the focal length of 28 - 85 mm. LED displays on the back of the unit give information about the flash readiness and correct exposure.

Zoom reflector (28-85mm)

Standard sync cable 36-50
Camera bracket 40-36 Spiral sync cable 36-52

mecablitz 20 C-2

For price-conscious beginners
Small, but look out: This is an ideal complement for everyone who loves compactness and doesnt want to go without good flash photos. The smallest compact flash unit currently available from Metz is clearly more effective than the flash integrated into the camera. The mecablitz 20 C-2 with GN 20 at ISO 100/21 and 35 mm focal length is intended for all those who prefer a flash which will also fit into your jacket pocket. This small, chic model offers two automatic apertures. And the special key feature is the swivel reflector! LED displays on the back of the unit provide information about the flash readiness and also the correct exposure.
max. GN of 20 for ISO 100/21 and 35 mm
connection to camera via hot-shoe contact (x-synchronization) or via sync cable (included in delivery) vertically tilting reflector +90 LED displays flash readiness and exposure control indicator on the unit
automatic flash mode with 2 automatic apertures manual flash mode
2 x AA alkaline-magnesium batteries 2 x AA NC or NiMH rechargeable batteries

standard sync cable

Practical tilt reflector

Camera bracket 40-36

GN of 20 at ISO 100/21 (35 mm)
S l av e / SERVO f l a s h u n i t s
Servo mode (light controlled): With the mecablitz 28 CS-2 digital, you have a pure slave flash unit at your disposal that only flashes when you want it to with any camera. This is made possible by its learning function, which recognizes the pre-flash of your camera and only responds to its main flash. With this model, the picture results can be controlled very easily via the plus/minus buttons. Metz slave mode (wireless Metz remote system): This clever Metz system facilitates targeted light control for two Metz flash units. Here, one is attached directly to the camera as a so-called master flash. In contrast, the other slave flash unit can be positioned anywhere in the room. For this type of slave mode, a current Metz SCA flash unit is equipped with an SCA slave adapter (SCA-3083) instead of the SCA camera adapter, which is used for a conventional flash. This slave adapter makes additional slave qualities possible. By using a mecalux 11 as a server flash trigger, a flash unit can also be activated. However, all settings must be made on the flash unit itself here. Slave mode for the respective camera manufacture: The three system flash units mecablitz 58 AF-2 digital, mecablitz 50 AF-1 digital und 44 AF-1 digital open up another way to use slave mode. These models can be used as intelligent slave versions, supporting the flash modes of the respective camera manufacturers. In addition, the mecablitz 58 AF-2 digital has a master function that you can always use if the integrated flash of the camera doesnt provide a master mode.

Side lighting

The slave flash mode is interesting in order to obtain especially varied directed lighting. Completely without a cable (wireless), this method can be used to place and trigger an external flash at any place in the room. In this way, interesting additional lighting can be set, whether in the form of a light accent or a side light, for example. Naturally, multiple slaves can be used at the same time. It is particularly exciting to use this to obtain separate lighting for the subject and the background of the picture.
Slave/servo mode at close range: The Metz macro flash is fixed directly on the subject and creates precise yet creative lighting for close-ups. In addition to which the Metz mecablitz 15 MS-1 digital can also be used in its slave function for effectively brightening up dark areas of the picture.

Creative at close range:

Correct lighting is of particular importance in the macro range. The Metz macro flash 15 MS-1 digital is especially suited for this. Due to its positioning directly on the lens the light cannot fail to reach its destination. With its ring form and completely wireless functionality, the new Metz flash unit is excitingly attractive. Special light accents and a variety of lighting options are also possible thanks to adjustable reflectors. Thus, directed light can be adjusted in terms of contrast and brightness. In the slave mode, the Metz mecablitz 15 MS-1 can also be used to effectively lighten shadowed areas of pictures.
m e c a b l i t z C s - 2 d igi ta l

For the imaginative

Flash with a fun factor: Have you ever been upset due to photographs that are too dark, because the integrated flash in your camera was once again inadequate? Wouldnt you like to have a handy flash unit that can also be used separate from the camera once in a while? Then Metz has the perfect solution for you! Let the curtain rise for the Metz mecablitz 28 CS-2 digital, with technology and a size that have been optimally matched to compact digital cameras. The fun factor is increased by the self-learning servo mode and the smart EASY mode. For the very first time the flash result can be directly manipulated via the immediate correction buttons (+/-). Simply shoot, check the result on the camera screen and adjust straight away as required all at the touch of a button. Thanks to this servo model you can increase your flash power without any undesired side effects. The compact tool draws its power from either universally available alkaline micro batteries or equally competitive rechargeable micro batteries.
max. GN of 28 for ISO 100/21 and 85 mm
Servo mode: flash unit exposure via built-in camera flash or additional external flash unit LCD display flash readiness and exposure control indicator on the unit flash range indicator in the LCD illumination from 24 mm (wide-angle diffuser) up to 85 mm (telephoto attachment) automatic unit switch-off

automatic flash mode with 8 automatic apertures manual flash mode with 4 partial lighting levels Easy Mode: manual exposure correction with +/- buttons
Easy control with the +/- buttons

Clearly laid out display

Perfect for mounting on the integrated, extendible telescopic bracket
GN of 28 at ISO 100/21 (85 mm) GN of 22 at ISO 100/21 (35 mm)
Learning mode: optimum adaptation of the flash unit to the camera-specific pre-flash only once at the beginning Metz-specific TTL remote mode (slave mode) with other Metz flash units as the master
firmware update possible via Metz Service 2 x AAA alkaline-magnesium batteries 2 x AAA NC or NiMH rechargeable batteries
wide-angle diffuser (24 mm) telephoto attachment 85 mm extendible, integrated telescopic bracket to be fastened to the tripod socket of the camera
SUITABLE FOR ALL CAMERAS WITH BUILT-IN FLASH

Special feature

m e c a b l i t z M S - 1 Digi ta l
For those who love attention to detail
Innovation in the macro world! As a wireless macro flash, the Metz mecablitz 15 MS-1 digital has two individually adjustable reflectors. As a result this new ring-shaped macro flash ensures even, precise lighting On the other hand it also enriches creative lighting configuration in the macro range. There are no limits to personal creativity thanks to the individually adjustable reflectors (0- 20) and the associated finely calibrated light-distribution. In this way it is particularly easy to create effective highlights with any subject. This is all achieved with maximum ease because the Metz mecablitz 15 MS-1 digital automatically adjusts its light output by means of wireless TTL*, making it particularly reliable and precise. There is also a clear, dot-matrix display, which makes the mecablitz 15 MS-1 digital even easier to use. If you are looking for even greater scope for creativity, you can use the manual control facility of the new mecablitz 15 MS-1. This enables you to vary the amount of light given off, with six levels of light output. Spacesaving internal (rechargeable) batteries provide efficient power supply. The Metz mecablitz 15 MS-1 digital is compatible with all camera manufacturers (Canon, Nikon, Olympus, Panasonic, Pentax und Sony-Alpha) and naturally, even if the camera has no built-in flash, manual flash mode is possible via sync cable.
High max. guide number of 15 with ISO 100/21 und 50 mm
Two reflector system, individually adjustable (0 , 10 , 20 ) and separately accessible. Ratio (light distribution from left to right) 8:1, 4:1, 2:1, 1:1, 1:2, 1:4, 1:8 DOT matrix display Second shutter curtain synchronisation (subject to camera) Slow synchronisation (SLOW) Autofocus auxiliary light

Regarding your type of camera, also take note the SCA packaging imprint and the M version of the adapter. For current versions of the flash units or alternatively the adapters, see www.metz.de.

45 CL-4 digital Basic

45 CL-4 digital kit inCl. SCA 3045

76 MZ-5 digital

58 AF-2C 58 AF-2C 58 AF-2C
SCA 3102 SCA 3102 SCA 3102
50 AF-1C 50 AF-1C 50 AF-1C
44 AF-1C 44 AF-1C 44 AF-1C
36 AF-5C 36 AF-5C 36 AF-5C
24 AF-1C 24 AF-1C 24 AF-1C
58 AF-2N 58 AF-2N 58 AF-2N 58 AF-2N 58 AF-2N
SCA 3402 SCA 3402 SCA 3402 SCA 3402 SCA 3402
50 AF-1N 50 AF-1N 50 AF-1N 50 AF-1N 50 AF-1N
44 AF-1N 44 AF-1N 44 AF-1N

36 AF-5N 36 AF-5N

24 AF-1N 24 AF-1N 24 AF-1N

44 AF-1N

36 AF-5N

58 AF-2N 58 AF-2N

301 SCA 3402 SCA 3402
50 AF-1N 50 AF-1N 44 AF-1N

36 C-AF-5N

20 C-AF-1N

SCA 390 + 40-36 SCA 3902

58 AF-2O

SCA 351 SCA SCA 3202

50 AF-1O 44 AF-1O

36 C-AF-5O

20 C-AF-1O
SCA 396 + SCA 300 E + 40-36 SCA 3952

58 AF-2O

SCA 3202

50 AF-1O

44 AF-1O

36 AF-5O

24 AF-1O

58 AF-2O

301 SCA 3502 SCA 3202

50 AF-1O 44 AF-1O

36 C-AF-5O

20 C-AF-1O

58 AF-2P

SCA 3702

50 AF-1P

44 AF-1P

36 AF-5P

24 AF-1P

58 AF-2P
SCA 356 + SCA 300 D SCA 3562 SCA 3702

50 AF-1P 44 AF-1P

36 AF-5P

24 AF-1P

58 AF-2S

SCA 3302

50 AF-1S

44 AF-1S

36 AF-5S

24 AF-1S

28 CS-2 DIGITAL is suitable for compact cameras of all brands with an integrated flash
* The following operating modes are available, depending on camera configuration: - Remote TTL slave - Servo with or without pre-flash suppression - Manual mode via sync cable Please follow the operating instructions. Consult www.metz.de for more information

15 MS-1 Digital*

54 MZ-4i digital

24 AF-1/20 C-2

Nikon FV flash exposure memory for i-TTL and i-TTL-BL flash mode

/ / /

/ / /

/ /

// // //
Nikon i-TTL / i-TTL-BL flash mode Nikon matrix controlled fill-in flash mode Nikon underexposure warning in EV (f-stops) Nikon i-TTL remote flash system as master/controller/slave Olympus/Panasonic/Leica Four Thirds System (TTL compatible) Olympus Four Thirds System TTL remote flash system (RC mode) Pentax/Samsung contrast control Pentax/Samsung P-TTL flash mode Pentax Spot-beam mode Pentax/Samsung P-TTL remote flash system as master/controller/slave Sony DSLR-ADI flash control Sony DSLR multi-zone flash measurement (TTL pre-flash measurement)
Sony DSLR remote flash system as master/controller/slave (CTRL/CTRL+ operation)

/ /

Guaranteed in the future Firmware update via Metz Service Firmware update via USB port Power supply Runs on alkaline-magnesium batteries (1.5 V)
Runs on NC rechargeable batteries or NiMH rechargeable batteries (1.2 V)

240 430

Runs on lithium batteries (1.5 V) Runs on Metz NiMH rechargeable battery pack External energy supply with Metz Power Pack P 76 Number of flashes (at full light output) Running on alkaline-magnesium batteries (1.5 V) Running on NiMH rechargeable batteries (1.2 V/2100 mAh) Running on lithium batteries (1.5 V) Running on Metz NiMH rechargeable battery pack (1600 mAh) External energy supply with Metz Power Pack P 76 Flash cycle time in sec. (min./max.) Running on alkaline-magnesium batteries (1.5 V)
Running on NiMH rechargeable batteries (1.2 V)

250 320

450 460

100 5) 140 5) 175 5)

200 250

150 190

140 5) 200 5) 250 5)

160 350

0,1/4 0,1/4,5 0,1/6 0,1/3,5 0,1/3 0,1/4,5 0,1/5 0,1/3,5 0,1/3 0,1/4,5 0,1/10 0,1/3,5 0,1/4 0,1/4 0,1/4

0,1/2,5 0,1/2,5

0,3/3 0,3/3

0,3/5 0,3/5 0,3/5

0,3/8 0,3/6 0,3/6

0,3/5 0,3/6

0,3/10 0,3/8 0,3/8

0,3/4 0,3/4 0,3/5

Running on lithium batteries (1.5 V) Running on Metz NiMH rechargeable battery pack External energy supply with Metz Power Pack P 76 Size and weight Weight without power source in g (approx.) W Approx. dimensions in mm (W x H x D) H D Lamp pole Control section Lamp pole Control section Lamp pole Control section Lamp pole Control section 247 102

0,3/2,5 0,1/3

148 99

S SCA 3002 adapter system For system cameras with digital or analog data transmission between the camera and flash unit. By using an SCA adapter from the SCA 3002 system, there are numerous additional system flash functions available with flash units from the SCA 3002 system, depending on the type of camera. The firmware of an SCA adapter from the SCA 3002 system is updateable via Metz service for future cameras. The SCA 3002 adapters are an updated version of the SCA 3000 system. SCA 300 adapter system For system cameras for adaptation to flash units of the SCA 3002 or SCA 300 system. Depending on the type of camera, not all system flash functions are supported by the SCA 300 system. Secondary reflectorr
Swivel reflector Can be tilted horizontally and vertically for indirect flash. Can be tilted vertically for indirect flash. T TTL flash control While taking the photograph, the flash light is measured through the lens (TTL = through the lens) by a sensor in the camera. The light output of the flash unit is terminated as soon as the subject is correctly exposed. TTL fill-in flash control Reduces too high subject contrast (e.g. to brighten dark shadowy areas in bright sunshine). U USB Interface for firmware updates via the Internet. W Wake-up The flash unit can be reactivated by actuating the shutter release if the flash is in energy-saving standby mode after an extended break from taking photographs. (>>> Automatic unit switch-off) Wide-angle attachment To brighten shadows cast in the
P-TTL Modern further development of the TTL flash control with measurement pre-flash technique for Pentax cameras.
close-up ranges which appear when using an indirect flash. Servo mode
R REAR Synchronisation to the 2nd shutter curtain for more natural blurring effects for longer exposure times. Remote operation A remote system consists of a master or controller flash unit on the camera and one or more slave flash units. The slave flash unit is remotely controlled wirelessly by the master or controller flash unit. With a master flash unit, the flash light contributes to the exposure, in contrast to a controller flash unit.
The servo mode allows you to operate the Metz flash unit of the corresponding camera system wirelessly with the built-in flash unit on the digital camera. Allows light output to be calibrated as partial lighting. Slave mode An integrated sensor makes this wireless slave flash mode possible in combination with a master or controller flash unit. (>>> Remote operation) Z Sony / ADI Modern further development of the TTL flash control for Sony Alpha and Konica-Minolta cameras in which, for example, the data for distance to the subject must be put into the flash exposure in addition. Stroboscope mode Manual flash mode for flash sequences with a selectable intensity, frequency, and number of flashes, e.g. for special effect photos and motion studies.

Seite 94

2. Dedicated flash functions
Dedicated flash functions are flash functions that have been specially adapted to a given camera system. Depending on the type of camera, different flash functions are supported. Flash-ready indication in camera viewfinder Automatic flash sync speed control Standard TTL without measuring preflash) E-TTL flash mode / E-TTL II flash mode Automatic fill-in flash control Manual flash exposure correction for TTL / E-TTL / E-TTL II Flash exposure storage FE with E-TTL / E-TTL II 1st or 2nd curtain synchronisation (REAR) Automatic high speed synchronisation (HSS) with E-TTL / E-TTL II and M Automatic motor zoom control Extended zoom mode Automatic AF measuring beam control (multi-zone AF measuring beam) Automatic flash range indication Programmed auto flash mode (AUTO FLASH) Wireless Canon E-TTL remote flash mode Wake-up function for the flash unit It is impossible to describe all camera types and their individual dedicated flash functions within the scope of these instructions. Therefore, please refer to the flash mode description in your cameras operating instructions to find out which functions are supported and which ones have to be set manually on the camera.
3. Preparing the flash unit for use
3.1 Mounting the flash unit Mounting the flash unit on the camera
Turn the knurled nut towards the flash unit housing as far as it will go. The locking pin in the adapter shoe is now fully retracted into the case. Slide the flash unit foot completely into the camera accessory shoe. Turn the knurled nut towards the camera housing as far as it will go, clamping the flash unit in place. If the camera does not have a locking hole, the spring-loaded locking pin retracts into the adapter case so as not to damage the surface.
Turn off the camera and flash before mounting or removing.
Removing the flash unit from the camera
Turn the knurled nut towards the flash unit housing as far as it will go. Remove the flash unit from the cameras accessory shoe.
Turn off the camera and flash before mounting or dismounting.

3.2 Power supply

Suitable batteries/rechargeable batteries The flash unit can be operated with any of the following batteries: 4 NiCad batteries 1.2V, type IEC KR 15/51 (KR6, size AA). They permit very fast recycling times and are economical in use because they are rechargeable. 4 nickel-metal-hydride batteries 1.2V, type HR6 (size AA). They have a significantly higher capacity than NiCad batteries and are less harmful to the environment, since they have no cadmium. 4 alkaline-manganese dry cell batteries 1.5V, type IEC LR6 (size AA). Maintenance-free power source for moderate power requirements. 4 lithium batteries 1.5V, type IEC FR6 L91 (size AA). Maintenance-free highcapacity power source with a low self-discharge rate.

suitable combination of shutter speed, aperture and flash output. In E TTL II mode, and with suitable lenses, the distance to the subject is also taken into consideration in calculating the optimal flash output. Depending on the type of camera and mode used, the fill-in flash mode will be activated automatically by the camera. No special indication appears on the display. See your camera's operating instructions for more information. If the shot was properly lit, the correct exposure indication will flash OK for about 3 seconds (see 13). Ensure that the contre-jour light source does not shine directly into the lens, as this will interfere with the cameras TTL metering system. In the automatic flash mode A, the flash unit sensor measures the light that reflects back from the subject. The sensor has a coverage of about 25, and only measures the light for the time a flash is fired by the mecablitz. The flash is cut off as soon as sufficient light has been emitted for correct exposure. The sensor of the mecablitz has to be directed at the subject. The maximum range is shown on the LC display. The shortest shot distance is approximately 10% of the maximum distance range. The subject should be located within the middle third of the distance range shown on the LC display to allow the electronic system sufficient leeway for compensation. Setting procedure: Press the Mode button until Mode flashes on the LC display. Set the flash mode A using the UP and DOWN keys. The flash mode selected is then highlighted. The setting takes effect immediately. Press the Return button to change the LC display back to the normal view. If the Return button is not pressed, the display will change back to the normal view after about 5 seconds. If the shot was properly lit, the correct exposure indication will flash OK for about 3 seconds (see 13). 97

5.4 Automatic flash mode

5.3 TTL / E TTL fill-in flash mode
Fill-in flash TTL overcomes troublesome dense shadows for daylight shots and produces a more balanced exposure between subject and background with contre-jour shots. The cameras computer-controlled metering system sets the most

Seite 98

5.5 Automatic fill-in flash mode
When shooting in automatic fill-in flash mode in daylight, the automatic flash mode A will automatically set a correction of between -1 and -2 f-stops to compensate for flash exposures (see 6.4 and 10.5). This has a graduated lightening effect on shadowy areas, which has a natural appearance on the photograph.
Some cameras only support the

5.7 Strobe flash mode

M manual flash mode when the camera is set to the manual operating mode M.

5.6 Manual flash mode

In the manual flash mode M , the flash unit emits the full uncontrolled amount of light if no partial light output has been selected. The specific photographic situation can be taken into account by making adjustments to the aperture setting or by selecting a suitable partial light setting. Setting procedure: Press the Mode button until Mode flashes on the LC display. Choose the flash mode M using the UP and DOWN arrows. The flash mode M is then highlighted. The setting takes effect immediately. Press the Return button to change the LC display back to the normal view. If the Return button is not pressed, the display will change back to the normal view after about 5 seconds. Set partial light output: Press the Para button (Parameters ) until P flashes on the LC display for partial light output. * Set the desired light output (1/1-1/256) with the +/ buttons. The setting takes effect immediately. * Press the Return button to change the LC display back to the normal view. If the Return button is not pressed, the display will change back to the normal view after about 5 seconds. The mecablitz LC display will indicate the flash-to-subject distance required for a correct flash exposure. 98

The strobe flash mode is a manual flash mode. It allows several flash exposures to be made on a single photo, which can be especially interesting for movement studies or special effect images. In strobe flash mode, several flashes at a certain flash frequency are emitted. For this reason, this function is only possible with a partial light output of 1/4 or less. The flash frequency (flashes per second) for a stroboscope image can be set between 1. 50 Hz in 1 Hz intervals, and the number of flashes can be set between 2. 50 in intervals of one. Setting procedure: Press the Mode button until Mode flashes on the LC display. Choose the flash mode using the UP and DOWN arrows. The flash mode is then highlighted. The setting takes effect immediately. Press the Return button to change the LC display back to the normal view. If the Return button is not pressed, the display will change back to the normal view after about 5 seconds. Strobe number of flashes (N) In strobe mode, the number of flashes per shot (N) can be selected. The number of flashes can be set from 2 to 50 in intervals of one. The maximum manual partial light output is automatically adjusted to this number. Strobe flash frequency (f) Strobe mode allows you to select the flash frequency (f), which indicates the number of flashes per second. The number of flashes can be set from 1 to 50 in intervals of one. The maximum manual partial light output is automatically adjusted to this number.

Seite 99

Setting procedure: Press the Para button (Parameters) until the desired flash parameter (N or f) flashes on the LC display. Set the desired value using the +/ buttons. The setting takes effect immediately. Press the Return button to change the LC display back to the normal view. If the Return button is not pressed, the display will change back to the normal view after about 5 seconds. The maximum possible partial light output depends on the ISO and aperture settings, and is automatically set in strobe mode. If you desire short flashes, you can manually reduce the partial light output to the lowest value of 1/256. The mecablitz LC display will indicate the flash-to-subject distance required for a correct flash exposure, given the parameters selected. By changing the aperture setting or the partial light output, this value can be adjusted to fit the actual distance to the subject. Setting procedure: Press the Para button (Parameters) until the desired flash parameter (F=f-stop or P=partial light output) appears on the LC display. Set the desired value using the +/ buttons. The setting takes effect immediately. Press the Return button to change the LC display back to the normal view. If the Return button is not pressed, the display will change back to the normal view after about 5 seconds. Aperture and ISO settings do not appear on the LC display in strobe mode. Strobe mode may not be combined with an operational second reflector.

position of the main reflector, aperture, ISO light sensitivity, etc. have to be adjusted to match the camera. For this automatic data transfer to occur, the flash unit has to be mounted on the camera, and both devices have to be switched on. In addition, a data exchange between the camera and flash unit has to be initiated, for which you simply briefly press the shutter release. The maximum range as per the current flash parameters is shown on the display.
6.1 Setting procedure for the flash parameters
Depending on the flash mode set, various flash parameters are shown in the menu: For cameras with digital data transfer, the flash parameters for aperture (F), lens focal length (Zoom), and light sensitivity (ISO) are automatically set on the flash unit. The flash parameters for aperture (F) and light sensitivity (ISO) cannot be changed. If the camera does not transfer one or more flash parameters to the flash unit, you will have to adjust these settings by hand. Press the Para button (Parameters) until the desired flash parameter (see below) appears on the LC display. The following parameters are available: TTL/E-TTL/A/E-TTL-HSS M/M HSS F Zoom EV ISO P F Zoom ISO N f P F ISO Number of strobe flashe Strobe flash frequency Manual partial light output Aperture Manual flash exposure correction Light sensitivity 99 Table 1
When a button is pressed for the first time, the LC display is illuminated.
Zoom Mainreflektor position
6. Flash parameters (Parameter menu)
For the flash unit to operate correctly, various flash parameters such as the zoom

Seite 100

Set the desired value using the +/ buttons. The setting takes effect immediately. Press the Return button to change the LC display back to the normal view. If the Return button is not pressed, the display will change back to the normal view after about 5 seconds.

6.2 Aperture (F)

If there is no digital data transfer between the camera and flash unit, the aperture can be set by hand from 1.0 to 45 (at ISO 100), in intervals of one full aperture. For flash modes A (automatic) and M (manual), the camera and flash unit have to be set to the same aperture. Setting procedure: Press the Para button (Parameters) until F flashes on the LC display. Set the desired value using the +/ buttons. The setting takes effect immediately. Press the Return button to change the LC display back to the normal view. If the Return button is not pressed, the display will change back to the normal view after about 5 seconds. During digital data transfer between the camera and flash unit, intermediate values are also adjusted. During TTL-/E-TTL-flash mode, setting the aperture on the flash unit is only necessary to achieve the correct distance range indication, not for the function of the flash.

Use the UP and DOWN buttons to select BEEP from the menu. The selected menu item will be highlighted against a dark background. Press the Set key to confirm the special function selection. Choose the setting desired using the UP and DOWN arrows. The setting takes effect immediately. Press Return repeatedly to return the display to its normal reading. If the Return key not pressed, the display will switch back to normal automatically after approximately 5 seconds.
7.3 Flash Bracketing Series (FB)
A series of flash exposures (flash-bracketing FB) can be carried out in the TTL , E TTL and automatic A flash modes. A flash bracketing series consists of three successive flash shots with different flash exposure correction values. When a flash bracketing series is set, FB and the correction value appear on the display. The possible correction values range from 1/3 to 3 apertures in onethird aperture increments. Setting procedure: Press the SEL button repeatedly until Select appears on the display. Select the menu option FB by pressing the UP and DOWN buttons. The selected menu option will be highlighted. Confirm the selection of the special function by pressing the Set button. Select the desired setting with the UP and DOWN buttons. The setting takes effect immediately. Press the Return button repeatedly until the screen is reset to its normal view. If the Return button is not pressed, the display is automatically reset to its normal view after about 5 seconds. When FB 0 is displayed, the flash bracketing series is deactivated. The first shot is taken without a correction value. FB 1 will also appear on the display.

Seite 103

The second shot is taken with minus correction. FB 2 and the minus correction value (EV) will also appear on the display. The third shot is taken with plus correction. FB 3 and the plus correction value (EV) will also appear on the display. After the third shot, the flash bracketing series is automatically deleted. FB will disappear from the display. When the flash bracketing series is set, the correction value is always shown as a positive value! Flash bracketing series in the TTL flash mode A flash bracketing series in the TTL flash mode is only possible if the camera supports the setting of a manual flash exposure correction on the flash unit (see camera instruction manual)! Otherwise, the shots are taken without a correction value! Flash bracketing in automatic flash mode A The type of camera is not important for a flash bracketing series in automatic flash mode A.
7.4 2nd curtain synchronisation (REAR mode)

go to zoom position 50mm x1.5=75mm. However, as the mecablitz only has zoom positions 70 mm or 85 mm, the zoom is set to 70 mm in order to ensure complete illumination. - The 70 mm zoom setting results in a focal length of 70 mm : 1.5 = 46.6. So "SZoom47" appears on the display of the mecablitz. Setting procedure: Press the SEL button repeatedly until Select appears on the display. Select the menu option ZoomSize by pressing the UP and DOWN keys. The selected menu option will be highlighted. Confirm the selection of the special function by pressing the Set button. Select the desired setting with the UP and DOWN keys. The setting takes effect immediately. Press the Return button repeatedly until the screen is reset to its normal view. If the Return button is not pressed, the display is automatically reset to its normal view after about 5 seconds. Once the Zoom Size mode is activated, S-Zoom will appear on the display next to the focal length. Refer to your cameras instruction manual for further information.
7.7 Cordless remote mode (Remote)
When Remote OFF appears, the cordless remote mode is deactivated. When Remote Master appears, the flash unit is operating as a guiding master flash unit on the camera. When Remote Slave appears, the flash unit is operating completely as a slave flash unit. See also Section 19. Setting procedure: Press the SEL button repeatedly until Select appears on the display. Select the Remote menu option by pressing the UP and DOWN keys.

Seite 105

The selected menu option will be highlighted. Confirm the selection of the special function by pressing the Set button. Select the desired setting with the UP and DOWN keys. The setting takes effect immediately. Press the Return button repeatedly until the screen is reset to its normal view. If the Return button is not pressed, the display is automatically reset to its normal view after about 5 seconds.
7.8 Meter-Feet changeover (m/ft)
The maximum flash range indicated by the flash units display can either be shown in meters or feet. The setting can be adjusted under the menu option m/ft. Setting procedure: Press the SEL button repeatedly until Select appears on the display. Select the m/ft menu option by pressing the UP and DOWN keys. The selected menu option will be highlighted. Confirm the selection of the special function by pressing the Set button. Select the desired setting with the UP and DOWN keys. The setting takes effect immediately. - When m is displayed, distances will be shown in meters. - When ft is displayed, distances will be shown in feet. Press the Return button repeatedly until the display is reset to its normal state. If the Return button is not pressed, the display is automatically reset to its normal view after about 5 seconds.

8. Motor Zoom Reflector

The zoom position of the main reflector can be adjusted for focal lengths of at least 24 mm (35 mm format). For lenses with focal lengths of 18 mm or more, the integrated wide-angle diffuser can be positioned over the main reflector. The following zoom positions are available: 24 mm - 28 mm - 35 mm - 50 mm - 70 mm - 85 mm - 105 mm (corresponding to 35 mm format) When using the wide-angle diffuser the main reflector is automatically moved to the 24 mm position! Because of the wide-angle diffuser, 18 mm appears on the display (see 9). Automatic zoom adjustment This causes the zoom position of the main mirror to automatically adjust to the lens focal length. "A-Zoom" and the mirror position (in mm) will then appear on the flash unit's display panel.
Manual zoom adjustment If the camera does not transfer the parameters for the lens focal length or for the zoom position, the zoom position of the flash reflector has to be adjusted by hand. "M-Zoom" will then appear in the LC display. See also 6.3. If you use a zoom-lens and do not necessarily need the full guide number and maximum flash range of the flash unit you can leave the zoom reflector at the position for the shortest focal length of the zoom lens. This will provide full light coverage of the picture and eliminate the need to continually adjust it to the focal length of the lens. Example: You use a zoom lens with a focal length range of 35 mm to 105 mm. In this case, set the position of the main reflector to 35 mm! Manual adjustment of the zoom position with A-Zoom The zoom position of the main reflector can also be changed when the flash unit is used with a camera capable of data transmission, in order to achieve special lighting effects (such as hot-spot, etc.). See also 6.3. Once saved, M-Zoom will be indicated on the display. Resetting to A-Zoom mode Touch the shutter release to begin a data transfer between the flash unit and the camera. Continue changing the zoom position until A-Zoom appears on the display.

9. Wide-angle diffuser

With the wide angle diffuser , focal lengths of 18 mm or more can be illuminated (35 mm format). Pull the wide-angle diffuser out from the main reflector as far as it will go, and then release it. The wide-angle diffuser automatically folds downwards. The main reflector automatically moves to the required position. The distance 107

Seite 108

readings and the zoom value are corrected to 18 mm on the display panel. To insert the wide-angle diffuser , turn it upwards 90 and push it all the way in.

10. Flash techniques

10.1 Bounce flash
Bounce flash illuminates the subject more softly and reduces dense shadows. It also reduces the drop in light from foreground to background that occurs for physical reasons. The main reflector of the flash unit can be swivelled horizontally and tilted vertically for bounce flash. To avoid colour cast in your shots, the reflective surface should be colour-neutral or white. For frontal fill-in lighting, the secondary reflector can also be activated in the Select Menu (see 7.9). When tilting the main reflector vertically, make sure that it is turned through an angle that is wide enough to prevent direct light from falling on the subject. The reflector should be tilted at least as far as the 60 lockin position. Flash ranges do not appear on the display when the main reflector is turned. The use of bounce flash with the integrated reflector card can bring out highlights in the eyes of human subjects. Tilt the reflector head upwards by 90. Pull the reflector card together with the wide-angle diffuser above out from the reflector head Hold the reflector card and insert the wide-angle diffuser into the reflector head.
When the main reflector is swivelled or tilted, the secondary reflector can also be activated in the Select Menu for frontal fill-in lighting of the subject (see 7.9). Using the secondary reflector is generally practical and feasible only for bounce flash with a swivelled or tilted main reflector. If the main reflector is not swivelled or tilted, the secondary reflector will not be activated for the shot. When the secondary reflector is activated, approximately 85% of the light from the flash unit will be reflected by the main reflector and approximately 15% by the secondary reflector. These values may vary somewhat when the flash is used with partial light output levels. If the light from the secondary reflector is too bright, it can be reduced by half in the Select Menu (see 7.9). The secondary reflector is not supported by the stroboscopic, modelling light (ML) and remote flash modes. The secondary reflector does not flash when the main reflector is in its normal position or is tilted downwards.

10.3 Bounce flash with secondary reflector
10.4 Close-ups / macro shots
In close-ups and macro shots, parallax error between the flash unit and lens may result in shadows on the lower edge of the image. To compensate for this, the main reflector can be tilted downwards by an angle of -7. To do this, depress the reflector release button and tilt the reflector downward. If the main reflector is tilted downwards, "TILT" is shown on the display to indicate this. Certain minimum lighting distances must be maintained for close-up shots to avoid overexposure. The minimum lighting distance is approximately 10% of the maximum flash range indicated on the LC display. For close-up shots, make sure that the flash light is not shaded by the lens.
10.2 Bounce flash with a reflector card

Seite 109

10.5 Manual flash exposure corrections
The auto flash exposure mode of the flash unit, as of most cameras, is adjusted to a reflection factor of 25% (the average reflection factor of flash subjects). A dark background that absorbs much of the light or a highly reflective bright background (backlit shots, for example) may result in, respectively, underexposure or overexposure of the subject. To offset these effects, the flash exposure can be adjusted manually for the shot with a correction value. The extent of the correction depends on the contrast between subject and background. In TTL, E-TTL and automatic flash modes, manual flash exposure correction factors of from -3 EV (f-stops) to +3 EV (f-stops) can be adjusted on the flash unit in 1/3 step increments. Many cameras have a setting element for exposure corrections that can also be used in TTL flash mode. Please refer to the information in the cameras operating instructions. Dark subject in front of a bright background: Positive correction value (approximately +1 to +2 f-stops EV). Bright subject in front of a dark background: Negative correction value (approximately -1 to -2 f-stops EV). When a correction value is set, the flash range indicated on the flash unit display may change as it adjusts to the correction value (depending on the type of camera). For adjustments, see 6.4. Manual flash exposure correction is possible in TTL flash mode only if the camera supports this function (consult the cameras operating instructions). If the camera does not support this function, the adjusted correction value will have no effect. For some camera models, the manual flash exposure corrections must be adjusted on the camera. If this is the case, no correction value will appear on the flash unit display.
11. Flash readiness indication

value indicated relates to subjects with a reflection factor of 25%, which applies to most photographic situations. Strong deviations from this reflection factor, as in the case of highly reflective or poorly reflective subjects, may affect the flash range. In TTL-, E-TTL and automatic flash mode, the subject should be in the middle third of the indicated range. This will give the automatic exposure control sufficient scope for compensation. To avoid overexposure, the minimum distance from the subject should be no less than 10% of the indicated value. An adjustment can be made to a particular photographic situation by changing the aperture setting, for example. In manual flash mode M, the distance that must be maintained from the subject for correct flash exposure is indicated. An adjustment to the photographic situation at hand can be achieved by, for example, changing the aperture setting on the lens and by selecting either full light output or P for a partial light output level. The flash range can be expressed in either meters (m) or feet (ft) according to the chosen setting (see 7.8). There is no flash range indication in remote mode or when the main reflector is swivelled or tilted.
15.1 Automatic adjustment of the flash range indication
Cameras transmit to the flash unit the flash parameters for ISO film speed, focal length of the lens (mm), aperture and exposure correction. The flash unit automatically adjusts its settings accordingly. The maximum flash range is calculated from the flash parameters and the guide number and indicated on the display. This requires an exchange of data between camera and flash unit, effected for example by tapping the shutter release.
15.2 Manual adjustment of the flash range indication
If the camera does not send the parameterrs, the zoom position, ISO film speed and f-stop parameters must be adjusted manually on the flash unit if the flash range indication is to be reliable (see Chapter 6).
15. Flash range indication
The maximum flash range is indicated on the display panel of the flash unit. The 110

Seite 111

15.3 Exceeding the display range
The flash unit can indicate maximum flash ranges of up to 199 m or 199 ft. This display range can be exceeded in the case of high ISO values (e.g., ISO 6400) and large aperture openings. An arrow or triangle after the distance value indicates that the display range has been exceeded.
17. Flash synchronisation
17.1 Normal synchronisation
In normal synchronisation the flash unit is triggered at the beginning of the shutter time (first curtain synchronisation). Normal synchronisation is the standard mode on all cameras. It is suitable for most flash shots. The camera, depending on the mode being used, is switched to the flash sync speed. Speeds between 1/30 sec. and 1/125 sec. are customary (see the cameras operating instructions). No settings are necessary on the flash unit, nor is there any display for this mode.

Seite 112

17.3 Slow synchronisation / SLOW
Various cameras feature slow flash synchronisation in certain modes. This setting will give added prominence to the background at lower ambient light levels. This is achieved by matching the shutter speed to the ambient light. Accordingly, shutter speeds that are slower than the flash sync speed are automatically adjusted by the camera. Some cameras automatically activate SLOW synchronisation in connection with certain camera programs (e.g. Av aperture priority, night shots program, etc.). No settings are made on the flash unit nor is there any display for this mode. Use a tripod to avoid camera shake with slow shutter speeds!
18. Multi-zone AF measuring beam
The multi-zone AF measuring beam is activated in the flash unit by the camera when the ambient lighting conditions become inadequate for automatic focusing. It projects onto the subject a striped pattern that the camera can use to focus. Depending on the cameras activated AF sensor, the AF beam has a range of approximately 6 m to 9 m (with a standard 1.7/50 mm lens). The maximum flash range is reached with the cameras central AF sensor. Parallax error between lens and AF measuring beam limits the close-up range with the AF measuring beam to approximately 0.7 m to 1 m. If the multi-zone AF measuring beam is to be activated by the camera, the single AF (S) autofocus mode must be set on the camera and the flash unit must indicate flash readiness. Some camera models support only the cameras internal AF measuring beam. In this case, the multizone AF measuring beam of the flash unit is not activated (as in the case of compact cameras; see the cameras operating instructions). Low-speed zoom lenses can significantly curtail the range of the AF measuring beam. Some cameras support the AF measuring beam in the flash unit only with the cameras central AF sensor. If a peripheral AF sensor is selected, then the AF measuring beam will not be activated in the flash unit.
17.4 Automatic high speed synchronisation HSS
Various cameras support the automatic high speed synchronisation HSS (see your camera's operating instructions). This flash mode makes it possible to use a flash unit even with shutter speeds that are faster than the flash sync speed. Interesting results may be achieved in this mode when, for example, a wide open aperture (e.g., F 2.0) is used to limit the depth of field. The flash unit supports high speed synchronisation in E-TTL (E-TTL HSS) and M modes (M HSS). For physical reasons, however, HSS high speed synchronisation significantly reduces the guide number and the maximum range of the flash unit. Therefore, be sure to note the maximum flash range on the LC display of the flash unit. HSS high speed synchronisation is activated automatically if a shutter speed faster than the flash sync speed is set on the camera, whether manually or automatically by the exposure program. Note that in the case of HSS high-speed synchronisation the guide number of the flash unit also depends on the shutter speed. The faster the shutter speed, the lower the guide number. The settings are made in the Mode menu

Should the flash unit fail to function properly or meaningless content
left for a few more flashes. See also chapter 3.2 "Replacing batteries". There are, however, battery batches with which the battery warning appears relatively early, even though there may still be up to 50 % of the flashes still available. In wireless remote mode it is not possible to provide a battery warning for system-related reasons. A battery symbol appears on the display There is a Metz Power Pack P76 connected to the mecablitz and there are batteries in the battery compartment of the mecablitz. Remove batteries from the mecablitz. The AF measuring beam of the flash unit is not activated. The flash unit is not ready for firing. The camera is not in Single AF mode (S-AF). The camera supports only its own internal AF measuring beam. Some cameras support the AF measuring beam in the flash unit only with the cameras central AF sensor. If a peripheral AF sensor is selected, then the AF measuring beam will not be activated in the flash unit. Activate the central AF sensor. Second curtain synchronization (REAR) cannot be activated on the flash unit. Second curtain synchronisation can only be used with cameras which support this function. The REAR function can be selected and activated on the flash unit only if an exchange of data has been effected between the flash unit and the camera, for example by tapping the shutter release. The reflector position is not automatically adjusted to the current zoom position of the lens. The camera is not transmitting any digital data to the flash unit. There is no exchange of data between the flash unit and the camera. Tap the cameras shutter release.

Seite 117

The camera is equipped with a lens without CPU. The aperture setting on the flash unit is not automatically adjusted to that of the lens. The camera is not transmitting any digital data to the flash unit. There is no exchange of data between the flash unit and the camera. Tap the cameras shutter release. The camera is equipped with a lens without CPU. The secondary reflector cannot be activated, or no flash is triggered. The secondary reflector does not support the stroboscopic, remote and modelling light (ML) flash modes. In these modes the secondary reflector cannot be activated, or the secondary reflector does not trigger a flash. The main reflector is in its normal position or tilted downwards. The secondary reflector flashes even though it is switched off. The mecablitz operates as a master in the remote system. The secondary reflector of the master flash unit controls the slave flash units. The light of the secondary reflector does not contribute to the exposure of the shot in this case. The TTL fill-in flash E TTL cannot be set. There has been no exchange of data between the flash unit and the camera. Tap the cameras shutter release. The camera does not support E-TTL fill-in flash mode. The setting for manual TTL flash exposure correction has no effect. The camera does not support manual TTL flash exposure correction on the flash unit. Flash unit cannot be set for wireless remote operation as the master flash unit. There has been no exchange of data between the flash unit and the camera. Tap the cameras shutter release.