Compare actual-size

ViaMichelin Navigation X-960 New Edition
ViaMichelin Navigation X-960 Europe New Edition
ViaMichelin Navigation X-970T New Edition
ViaMichelin Navigation X-970T Europe New Edition
ViaMichelin Navigation X-980T Europe New Edition

Print Comparison

Powerful navigation to suit your pocket

Super smart navigation

More Info More Info
More than just navigation

More Info

COMPARE Features
MP3 player Ergonomic, intuitive menu Touch screen 2D / 3D screen display Voice guidance Voice Synthesis Bluetooth: Hands-free phone function and connection to download GPRS services RDS TMC traffic information Compatible with viamichelin.co.uk Safety on the road

Equipment

Pre-loaded SD card Integrated Sirf Star III GPS receiver Accessories Rotating base Loudspeaker built into the base

-------

Content
Integrated safety cameras & free updates Real-time services (5-day weather forecasts) GPRS connection for safety camera location updates and MyViaMichelin favourite address updates Michelin Green Guide Michelin Hotel & Restaurant Guide Certified POIs (useful addresses) European mapping UK & Ireland mapping Tourist route downloads Current Events & Discovery routes to download

Michelin Technical Bulletin

October 1, 2007

Michelin X One Air Pressure Maintenance Practices REVISED
Tire pressure maintenance advice for users of the new Michelin X One wide single truck tires The Michelin X One family of truck tires is designed to replace dual assemblies on drive and trailer positions in over-the-road applications. Proper air pressure maintenance is critical to obtain optimized performance from these tires. Due to the unique casing design of the Michelin X One, traditional air pressure adjustment practices for dual tires may not apply to Michelin X One tires. In order to ensure optimal performance of these tires, Michelin North America offers the following guidelines: Cold inflation pressure should be based on maximum axle load in daily operation. Cold inflation pressures must not be lower than indicated in the tables below for actual axle loads. For additional information please consult the Michelin Data Book Truck Tires, Retreads, and Commercial Light Truck Tires (MWL40731).

445/50R22.5 LRL

PSI kPa LBS SINGLE KG SINGLE S S MAX LOAD PER TIRE 10200 LBS AT 120 PSI 4625 KG AT 830 kPa

455/45R22.5 LRM

PSI kPa LBS SINGLE KG SINGLE S S MAX LOAD PER TIRE 11700 LBS AT 130 PSI 5300 KG AT 900 kPa

455/55R22.5 LRL

PSI kPa LBS SINGLE KG SINGLE S S MAX LOAD PER TIRE 11000 LBS AT 120 PSI 5000 KG AT 830 kPa

455/55R22.5 LRM

PSI kPa LBS SINGLE KG SINGLE 16580 7520
See the charts on the back for use on 13.00x22.5" wheel.

17360 7880

18120 8220

18880 8560

19640 8900

20400 9250

21200 9580

22000 10000

22600 10240
MAX LOAD PER TIRE 11700 LBS AT 130 PSI 5300 KG AT 900 kPa
SPECIAL PROVISION FOR STEER AXLE USE ON 13.00 x 22.5" WHEELS
455/55R22.5 load range M may be fitted with 13.00 x 22.5" wheels for first life use on the steer axles. The reduced loads shown in the following table must be observed. Technical specifications for Michelin 455/55R22.5 LRM with 13.00 x 22.5" wheels steer axle, first life only.
Dimension Load Range Loaded Radius in. mm. RPM lbs. Max. Load Single psi kg. kPa

455/55R22.5

Dimension

Load Range

75 520

80 550

85 590

90 620

120 830
lbs. per axle kg. per axle

13740 6240

14460 6520

15180 6900

15880 7180

16600 7560

17280 7820

17980 8100

18660 8460

19340 8720

20000 9070
To determine the proper load/inflation table, always refer to the markings on the tire sidewall for maximum load at cold pressure. Contact your Michelin dealer for tires with maximum loads and pressures other than indicated here. Load and inflation industry standards are in a constant state of change. Michelin continually updates its product information to reflect these changes. Therefore, printed material may not reflect the current load and inflation information. NOTE: Never exceed the wheel manufacturers maximum air pressure limitation. In order to be under Federal maximum width of 102", an inset wheel must be used. A 4.32" inset will net 101.5" overall width on some refuse vehicles. There are currently steel wheels available from Accuride and Hayes Lemmerz. Caution: Ensure the wheel does not interfere with vehicle components when making full turns.
13.00 x 22.5" 15-DEGREE WHEEL SPECIFICATIONS
MANUFACTURER MATERIAL PART NUMBER FINISH WEIGHT (LB) OUTSET INSET MAX LOAD & INFLATION
10-hole, stud located, ball seat mounting 11.25" bolt hole circle Accuride Hayes Lemmerz Steel Steel 29802 10060TW White White 4.95 4.83 4.32 4.32 11,000 @ 110 11,000 @ 130
10-hole, hub piloted mounting 285.75 mm bolt hole circle Accuride Hayes Lemmerz Steel Steel 29811 10059TW White White 4.95 4.83 4.32 4.32 11,000 @ 110 11,000 @ 130
Note: The table provided is for reference only. Wheel specific questions should be directed to the wheel manufacturer. Accuride at www.accuridecorp.com or 1-800-626-7096; Hayes Lemmerz at www.hayes-lemmerz.com or 1-800-521-0515.
For additional information, please contact your local Michelin sales representative or contact Michelin using the website at www.michelintruck.com.

www.michelintruck.com

To order more brochures, please call Promotional Fulfillment Center 1-800-677-3322, Option #2

Monday through Friday, 9 a.m. to 6 p.m. Eastern Time MICHELIN NORTH AMERICA, INC., Greenville, South Carolina, USA MICHELIN NORTH AMERICA (CANADA) INC., Laval, Quebec, Canada MICHELIN MEXICO S.A. DE C.V., Quertaro, Mexico Copyright 2007 Michelin North America, Inc. MWT42673 (10/07) Revised. All rights reserved. An Equal Opportunity Employer.