Installation Instructions DG 4080 en-CA
Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions.
Installation Safety Instructions ,WARNING - Read all instructions
before installation or use of the appliance to prevent injury and appliance damage. Before installation make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond in order to avoid risk of damage to the appliance. If in doubt, consult a qualified technician. Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Before installation or service, disconnect the power supply to the work area by removing the fuse, "tripping" the service breaker, or switching off the power main. Ensure that the power is not restored to the appliance during maintenance or repair work. Do not use an extension cord to connect this appliance to electricity. Extension cords do not guarantee the required safety of the appliance (e.g. danger of overheating). Do not operate any appliance with a damaged cord or plug or if the appliance has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair or adjustment. Inspect the appliance for shipping damage. Do not install or operate a damaged unit. Contact the place of purchase. The appliance should be installed at a safe height for users to safely access all cooking levels and containers. This appliance is not designed for maritime use or for use in mobile installations such as recreational vehicles or aircraft. However, under certain conditions it may be possible for an installation in these applications. Please contact the nearest Miele dealer or the Miele Technical Service Department with specific requirements. This appliance is designed for installation in cabinetry or beneath a counter top. This is necessary to ensure that all electrical components are shielded.
Installation Safety Instructions
Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician. The manufacturer cannot be held responsible for damage caused by the lack, or inadequacy of, an effective grounding system. Do not tamper with electrical connections and components or mechanical parts. Never open the outer casing of the appliance.

SAVE THESE INSTRUCTIONS

Appliance and cut out dimensions
Installation in a tall cabinet
a Steam oven b Cabinet opening c Terminal block d Outlet or junction box This should be accessible after the appliance has been installed. e Power cord
Miele appliances can be installed flush or proud. Discuss your installation requirements with you architect, designer and installer.
Installation under a countertop
Installation above a Miele oven
a Steam oven b Cabinet opening c Terminal block d Outlet or junction box This should be accessible after the appliance has been installed. e Power cord f Oven

Installation

^ Push the appliance into the niche. After aligning the oven it must be secured in position. Open the oven door and using the two supplied screws i, secure it to the cabinet through the holes on either side of the vertical oven trim.

Electrical connection

The appliance comes equipped with a 6 ft (1.8 m) power cord with a NEMA 6 - 15P molded plug for connection to a 240 V, 15 A, 60 Hz power supply. Connection should be made via a suitable isolator, with an on-off switch which should be easily accessible for servicing work. Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work. Verify that the voltage, load and circuit rating information found on the data plate, match that of the household electrical supply before installing the appliance. If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Mieles Technical Service Department. U 1-800-999-1360 V 1-800-565-6535