Operating and installation instructions
Frost free fridge freezer with dynamic cooling KTN 4352 SD ed
To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed or used for the first time.

M.-Nr. 900

Contents
Guide to the appliance. 4 Caring for the environment. 5 Warning and Safety instructions. 6 How to save energy. 10 Switching on and off. 12 Switching off for longer periods of time. 12 The correct temperature. 13. in the refrigerator section. 13. in the freezer section. 13 Temperature selection. 14 Freezer section temperature indicator light. 14 Alarm. 15 Temperature alarm. 15 Door alarm. 15 Switching on the alarm system. 15 Switching the alarm off early. 15 Using Super freeze and Dynamic cooling. 16 Super freeze. 16 Freezing fresh food. 16 Dynamic cooling m. 17 Using the refrigerator efficiently. 18 Different storage zones. 18 Coldest area. 18 Warmest area. 18 Food which should not be stored in a refrigerator. 18 Storing food correctly. 19 Fruit and vegetables. 19 Adjusting the interior fittings. 20 Freezing and storing food. 21 Storing frozen food. 21 Home freezing. 21 Hints on home freezing. 21 Packing. 22 Before placing food in the freezer. 22 Placing food in the freezer. 22 Defrosting. 23 Ice cubes. 23
Cooling drinks. 23 Defrosting. 24 Refrigerator section. 24 Freezer section. 24 Cleaning and care. 25 Cleaning the outer casing, the interior and accessories. 25 Ventilation gaps. 26 Door seals. 26 Metal grille at the back of the appliance. 26 Problem solving guide. 27 Noises. 30 Service Department. 31 Electrical connection. 32 Electrical connection U.K. 32 Installation. 33 Location. 33 Climate range. 33 Ventilation. 33 Installation. 33 Aligning the appliance. 33 Changing the door hinging. 34 Building in the appliance. 37

Guide to the appliance

a Alarm button and indicator light b Freezer section temperature indicator light c Refrigerator section temperature display
d Super freeze button and indicator light e Refrigerator temperature display
a Freezer section shelf b Dynamic cooling fan with On/Off switch c Butter and cheese compartment d Refrigerator shelves e Egg tray f Interior lighting g Condensate channel and drain hole h Door shelves i Bottle divider j Fruit and vegetable containers * depending on model
Caring for the environment
Disposal of the packing material
The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Rather than just throwing these materials away, please ensure that they are recycled.
Disposal of your old appliance
Please ensure that the appliance presents no danger to children while being stored for disposal. It should be unplugged or disconnected from the mains electricity supply by a competent person. The plug must be rendered useless and the cable cut off directly behind the appliance to prevent misuse. See the "Warning and Safety" section of this booklet for further details. Electrical and electronic appliances often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. They are, however, essential for the correct functioning of your appliance. Please dispose of your old appliance at your local community waste collection / recycling centre and not with your household waste.
Take care not to damage the pipework at the back of it before or during transportation to an authorised collection depot. In this way, refrigerant in the pipework and oil in the compressor will be contained, and will not leak out into the environment.

Warning and Safety instructions

Technical safety

This appliance complies with all relevant legal safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before installation and before using it for the first time. They contain important notes on the installation, safety, operation and care of the appliance. Keep these instructions in a safe place and pass them on to any future user. This appliance contains the coolant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this environmentally friendly coolant has, however, led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the coolant flowing around the system. This is unavoidable, but does not have any adverse effect on the performance of the appliance. Care must be taken during the transportation and installation of the appliance that no parts of the cooling system are damaged. Leaking coolant can damage the eyes. In the event of any damage: - avoid open fires and anything which creates a spark, - disconnect from the mains, - air the room in which the appliance is located for several minutes and - contact the Service Department for advice. The more coolant there is in an appliance, the larger the room it should be installed in. In the event of a leakage, if the appliance is in a small room, there is the danger of combustible gases building up. For every 8 g of coolant at least 1 m3 of room space is required. The amount of coolant in the appliance is stated on the data plate inside the appliance.
This appliance is not a toy! To avoid the risk of injury, do not allow children to play on or near it, or to play with the controls. Supervise its use by the elderly or infirm.

Correct use

This appliance is intended for domestic use only for the cool storage of foodstuffs as well as for storing deep frozen food, freezing fresh food and for preparing ice. Any other usage is not supported by the manufacturer and could be dangerous. The manufacturer cannot be held liable for damage caused by incorrect or improper use of the appliance.
Before connecting the appliance to the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the appliance. Consult a qualified electrician if in any doubt. The electrical safety of this appliance can only be guaranteed when continuity is complete between the appliance and an effective earthing system which complies with local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested and where there is any doubt, the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). Safe operation of the appliance is only assured if it has been installed and connected in accordance with these operating and installation instructions. This equipment may only be used in mobile installations such as ships, caravans, aircraft etc. if a risk assessment of the installation has been carried out by a suitably qualified engineer. Installation work, maintenance and repairs may only be carried out by suitably qualified and competent persons in accordance with national and local safety regulations. Repairs and other work by unqualified persons could be dangerous and the manufacturer will not be held liable. Ensure current is not supplied to the appliance until after maintenance or repair work has been carried out. The appliance is only completely isolated from the electricity supply when: it has been switched off at the wall socket and the plug has been withdrawn. the mains fuse is withdrawn, or the screw-out fuse is removed (in countries where this is applicable). Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Never handle frozen food with wet hands. Your hands may freeze to the frozen food. Danger of frost burn. Do not take ice cubes out with your bare hands and never place ice cubes or ice lollies in your mouth straight from the freezer. The very low temperature of the frozen ice or lollies can cause frost burn to the lips and tongue.
Do not allow children to play with the appliance, for example to climb inside the drawers or to swing on the door. Do not refreeze thawed or partially thawed food. Defrosted food should be used up as quickly as possible, as food soon loses its nutritional value and goes off. Defrosted food may only be re-frozen after it has been cooked. Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Thermostats switching on may produce sparks which could present a fire hazard. Flammable compounds could explode. Do not use any electrical equipment in this appliance, e.g. ice cream makers. Danger of sparking and explosion! If storing alcohol with a high percentage proof, make sure it is tightly closed and stored upright. Danger of explosion. Do not store cans or bottles containing carbonated drinks or liquids which could freeze in the freezer. The cans or bottles could explode. Danger of injury and damage to the appliance. When cooling drinks quickly in the freezer, make sure bottles are not left in for more than one hour; otherwise they could burst. This could result in injury or damage. Observe the "use by" dates given on food to avoid the risk of food poisoning. Storage times will depend on several factors, including the freshness and quality of the food as well as the temperature at which it is stored. Follow the instructions given on food manufacturers packaging on storage conditions required as well as the "use by" date. Do not use sharp edged objects to remove frost and ice, separate frozen foods and remove ice trays. They will damage the evaporator, causing irreversible damage to the appliance. Never place electric heaters or candles in the appliance to defrost it. These can damage the plastic parts. Do not use defrosting sprays or de-icers, as they might contain substances which could damage the plastic parts or which could cause the build-up of gases and pose a danger to health. Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time. Do not allow grease or oil from foods placed in the refrigerator to spill or come into contact with plastic surfaces. Do not store cooking oil in the refrigerator door. Traces of oil can cause stress cracks to occur in the plastic components in the door.
Do not block the ventilation gaps in the appliance as this would impair the efficiency of the appliance, increase the electricity consumption and could cause damage to the appliance. The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range for your appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature, e.g. a garage, can lead to the appliance switching off for longer periods so that it cannot maintain the required temperature. Do not use a steam-cleaning appliance to defrost or clean this appliance. Pressurised steam could reach the electrical components and cause a short circuit. In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in a clean condition at all times. Any damage which may be caused by cockroaches or other vermin will not be covered by the guarantee.

Before disposing of an old appliance, first make the door latch or lock unusable. This way you will prevent children from accidentally locking themselves in and endangering their lives. Disconnect it from the mains. Cut off the cable and render any plug unusable. Be careful not to damage any part of the pipework whilst awaiting disposal, e.g. by puncturing the refrigerant channels in the evaporator. bending any pipework. scratching the surface coating. Splashes of refrigerant can damage the eyes. The manufacturer cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.

How to save energy

Normal energy consumption Increased energy consumption
Installation site In a ventilated room. Protected from direct sunlight. Not situated near to a heat source (radiator, oven). Where the ambient room temperature is ideal at approx. 20C. Temperature setting with a thermostat which is approximate (set in stages). Temperature setting with a thermostat which is exact to the degree (digital display). With a medium setting of 2 to 3. In an enclosed, unventilated room. In direct sunlight. Situated near to a heat source (radiator, oven. Where there is a high ambient room temperature. With a high setting: The lower the temperature in the freezer, the higher the energy consumption. On appliances with winter setting, please make sure that the winter setting is switched off when the ambient temperature is warmer than 16 C.

Cellar section 8 to 12C

Refrigerator section 4 to 5 C StayFresh zone just above 0 C Freezer section -18C Use Only open the door when necessary and for as short a time as possible. Store food in an organised way.
Frequent opening of the door for long periods will cause a loss of coldness. If food is not stored in an organised way, searching for an item will mean the door is open for longer. Placing hot food in the appliance will cause the compressor to run for a long time, as the appliance will have to work harder to lower the temperature. The evaporation or condensation of liquids will cause a loss of coldness in the refrigerator.

. in the freezer section

To freeze fresh food and to store frozen food for a long time, a temperature colder than -18 C is required. At this temperature the growth of micro-organisms is generally halted. As soon as the temperature rises above -10 C, the micro-organisms become active in the food again so that it cannot be kept as long. For this reason, partially defrosted or defrosted food must not be re-frozen. Food may be re-frozen once it has been cooked, as the high temperatures achieved when cooking destroy most micro-organisms.
. in the refrigerator section
We recommend a temperature of 5 C in the middle of the refrigerator section.

Temperature selection

The temperatures for both the refrigerator section and for the freezer section are set using the same temperature selector. The temperature display on the control panel always shows the required temperature. To set the temperature in the refrigerator section to 5 C, ^ turn the temperature selector clockwise from 0 until 5 lights up on the control panel. However, if frozen food is to be stored in the freezer section then a setting of between 3 C to 5 is recommended to ensure that the required temperature in the freezer section is maintained. It is also advisable to set the temperature within this range if the door is opened frequently, large quantities of food are stored in the refrigerator section or there is a high ambient temperature.
Freezer section temperature indicator light
The indicator light comes on when the temperature is the freezer section is -18C or colder. If the indicator light is not on the temperature in the freezer section is too warm. If this is the case, turn the temperature selector clockwise.
Your appliance has been fitted with a warning system which ensures that the temperature in the freezer section cannot rise unnoticed and to avoid energy being wasted if a door is left open.
Switching on the alarm system
The alarm system is always active. It does not have to be switched on manually.
Switching the alarm off early
The alarm stops and the indicator light goes out once the temperature in the freezer section is sufficiently cold or with the door alarm, once the appliance doors have been closed. However, if the noise disturbs you, you can turn the alarm off before this if you wish.

Temperature alarm

An alarm will sound and the alarm indicator light will flash if the temperature in the freezer section becomes warm. The alarm will sound and the alarm indicator light will flash, if the freezer section door has been left open for a while, e.g. in order to load, re-arrange or take food out. when freezing large amounts of food at once. if there has been a lengthy interruption to the power supply.

Using the refrigerator efficiently

Different storage zones

Due to the natural circulation of the air in the appliance, there are different temperature zones in the refrigerator. Cold, heavy air sinks to the lowest section of the appliance. Make use of the different zones when placing food in the appliance. Coldest area The coldest area in a refrigerator is directly above the vegetable containers. Use this for all delicate and highly perishable food, e.g. fish, meat, poultry, sausage products, ready meals, dishes or baked goods containing eggs or cream, fresh dough, cake mixtures, pizza or quiche dough, soft cheese and other dairy products, pre-packed vegetables and other fresh food with a label stating it should be kept at a temperature of approx. 4 C. Warmest area The warmest area is in the top section of the door. Use this for storing butter and cheese. Do not store explosive materials in the appliance or any products containing propellants (e.g. spray cans). Danger of explosion. If storing alcohol with a high percentage proof, make sure it is tightly closed, and store upright. Do not store cooking oil in the refrigerator door. Traces of oil can cause stress cracks to occur in the plastic components in the door. Food must not touch the back wall of the appliance, as it may freeze to the back wall.
Food which should not be stored in a refrigerator
Not all food is suitable for storing in the refrigerator. These include: Fruit and vegetables which are sensitive to cold, such as bananas, avocado pears, papaya, passion fruit, aubergines, peppers, tomatoes and cucumbers Fruit which is not yet ripe Potatoes Some hard cheeses, e.g. Parmesan

Storing food correctly

Store food covered or packaged. This will prevent food smells or tastes from affecting other foods, and prevent food from drying out and also any cross-contamination of bacteria. The growth of bacteria, such as salmonella, can be avoided by setting the correct temperature and maintaining good standards of hygiene. Fruit and vegetables Fruit and vegetables can be stored loose in the vegetable containers. However, you should bear in mind that some types of vegetables give off a natural gas which speeds up the rate at which food perishes. Some fruit and vegetables react strongly to this gas and should not be stored together. Examples of fruit which produce a large amount of this natural gas are: Apples, apricots, pears, nectarines, peaches, plums, avocado pears and figs. Examples of fruit and vegetables which react strongly to the natural gases given off by other types of fruit and vegetables are: Kiwis, broccoli, cauliflower, Brussels sprouts, mangos, honeydew melons, apples, apricots, cucumbers, tomatoes, pears, nectarines and peaches.

Adjusting the interior fittings

Moving the shelves

The shelves can be adjusted according to the height of the food. ^ Raise the shelf at the front, pull it out half way, and then lift it out. ^ With the rear barrier facing upwards, place the shelf at the required position. The rear barrier must face upwards to prevent food from touching the back of the appliance and freezing to it.
Adjusting the door shelves
^ Push the door shelf upwards, then remove it by pulling it forwards. ^ Replace the door shelf at the required position. Ensure that it is securely pushed back into position.
Moving the bottle divider
(depending on model) The bottle divider can be moved to the left or right to ensure that bottles are held securely in position when the door is opened and shut.

Split shelf

In order to accommodate tall items in the appliance, one of the shelves is divided. The front section can be pushed under the rear section. ^ Pull the front half of the glass shelf forwards slightly and then push it carefully under the rear half.
Freezing and storing food
Maximum freezing capacity
To ensure that fresh food placed in the freezer freezes through to the core as quickly as possible, the maximum freezing capacity must not be exceeded. The maximum freezing capacity for freezing within a 24-hour period is given on the data plate: Freezing capacity.kg/24 hrs.

Home freezing

Only freeze fresh food which is in a good condition. Hints on home freezing The following types of food are suitable for freezing: Fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, pastry, leftovers, egg yolks, egg whites and a range of pre-cooked meals. The following types of food are not suitable for freezing: Grapes, lettuce, radishes, sour cream, mayonnaise, eggs in their shells, onions, whole raw apples and pears. To retain colour, taste and vitamin C, vegetables should be blanched after they have been trimmed and washed. To blanch: bring a large saucepan of water to the boil and immerse the vegetables in the fast boiling water for 2-3 minutes, depending on the variety. Remove, and plunge into ice cold water to cool quickly. Drain and pack ready for freezing. Lean meat freezes better than fatty meat, and can be stored for considerably longer. To prevent chops, steaks, cutlets or rolled meat from freezing together in solid blocks when packed, separate with a sheet of plastic freezer film.

Storing frozen food

When buying frozen food to store in your freezer compartment, check that the packaging is not damaged, the use-by date, the temperature at which the frozen food is being stored in the shop. The length of time it can be kept is reduced if it has been stored at a temperature warmer than -18 C. ^ Buy frozen food once you have finished the rest of your shopping, and wrap it in newspaper or use a cool bag or cool box to transport it. ^ Store it in the freezer section as soon as possible. Never re-freeze partially or fully defrosted food. Consume defrosted food as soon as possible as it will lose its nutritional value and spoil if left for too long. Defrosted food may only be re-frozen after it has been cooked.

E-Cloth

^ A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals.

Before cleaning

^ Switch the appliance off by turning the temperature selector to "0" and then switching off at the socket and removing the plug. ^ Take any food out of the appliance and store it in a cool place.

Ventilation gaps

^ The ventilation gaps should be cleaned regularly with a brush or vacuum cleaner. A build-up of dust will increase the energy consumption of the appliance.

After cleaning

^ Replace all shelves and accessories in the refrigerator section. ^ Place food back in the refrigerator section, close the doors, and switch the appliance on. ^ Once the temperature in the freezer has reached the required temperature, place the food back in the freezer.

Door seals

Do not use any grease or oil on the door seals as these will cause the seals to deteriorate and become porous over time. The door seals should be cleaned regularly with clean water and then wiped dry with a soft cloth.
Metal grille at the back of the appliance
The metal grille at the back of the appliance (heat exchanger) should be dusted at least once a year. A build-up of dust will increase the energy consumption of the appliance. When cleaning the grille, make sure that the pipework and other components do not get broken or damaged in any way.

Problem solving guide

Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Some minor problems can be corrected without contacting the Miele Service Department. What to do if. the appliance does not get cool. ^ Make sure that the temperature selector is not pointing to the "0" position. ^ Check that the plug is correctly inserted in the socket and switched on. ^ Check that the fuse is not defective and that the mains fuse has not blown. If it has, contact the Miele Service Department. the temperature in the refrigerator section is too low. ^ Turn the temperature selector clockwise so that a warmer temperature lights up on the control panel. ^ Check that the freezer section door has been closed properly. ^ Has a large amount of fresh food been put in at the same time for freezing?

This makes the compressor run for longer, causing the temperature in the refrigerator section to fall automatically. ^ Super freeze has not switched itself off. It switches itself off after 65 hours. the appliance is switching in too frequently and for too long. ^ Check whether the ventilation gaps have been covered over or become dusty. ^ Check whether the metal grille (heat exchanger) at the back of the appliance has become too dusty. ^ The doors have been opened too frequently, or a large amount of fresh food has been put in at once for freezing. ^ Check that the doors have been closed properly. the frozen food is thawing because the freezer section is too warm. ^ Is the room temperature lower than the ambient temperature for which the appliance is designed? If so, raise the temperature of the room. Operating in a room which is too cold will cause the cooling system to switch off for too long causing the freezer section to become too warm.
. food has frozen together. Use a blunt instrument, e.g. a spoon handle or plastic scraper, to prise it apart carefully. the alarm sounds and the alarm indicator light is flashing. One of the appliance doors is open or the temperature in the freezer section is too warm because ^ the freezer section door has been opened too frequently, or large amounts of fresh food have been put in at once for freezing. ^ the ventilation gaps are blocked. ^ there has been a lengthy interruption to the power supply. Once the problem has been resolved, the alarm will stop, and the indicator light will light up constantly until the temperature in the freezer is sufficiently cold. If the indicator light does not go out after a while, call the Service Department. the Super freeze indicator light does not light up although the appliance is working. The indicator light is defective. Call the Service Department. ^ Press the sides of the lamp cover inwards (1), disengage the cover (2) and unclip it at the rear. ^ Replace the lamp. Lamp specification: 220 - 240 V, max. 25 W, E 14 fitting. the interior light in the refrigerator section is not working. ^ Has the contact switch become stuck? ^ Make sure that the temperature selector is not pointing to the "0" position. If it is not pointing to the "0" position, the lamp is defective: ^ Disconnect the appliance from the mains. Switch off at the wall and withdraw the plug from the socket, or disconnect the mains fuse or remove the screw-out fuse in countries where this is applicable.

^ Screw the new lamp into the connection. Ensure it goes in correctly. ^ Replace the cover by clipping it in at the rear and then pressing it in at the sides. the floor of the refrigerator section is wet. The drain hole is blocked. ^ Clean the condensate channel and drain hole.
If you still cannot remedy the fault having followed these suggestions, please contact the Miele Service Department. To prevent unnecessary loss of temperature it is advisable not to open the doors while waiting for the appliance to be serviced.

Noises

Normal noises
Brrrrr. Blubb, blubb. Click. Sssrrrrr.

What causes them

Humming noise made by the motor (compressor). This noise can get louder for brief periods when the motor is switching on. A gurgling noise can be heard when coolant is circulating through the pipes. Clicking sounds are made when the thermostat switches the motor on and off. On multi-zone and frost-free appliances you can sometimes just hear the movement of air circulating inside the appliance.
Remember that the noise of the compressor and the coolant circulating in the system is unavoidable.
Noises that you can easily rectify

Rattling, vibrating

What causes them, and what can you do about them?
The appliance is uneven: Realign the appliance using a spirit level, by raising or lowering the screw feet underneath the appliance. The appliance is touching another appliance or piece of furniture: Move it away. Drawers, baskets or shelves are unstable or sticking: Check all removable items and refit them correctly. Are any bottles or containers unstable or knocking against each other? Separate them. The transport cable clips are hanging loose at the back of the appliance: Remove the clips.

Service Department

In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: Your Miele Dealer or The Miele Service Department (see back cover for address).
When contacting your Dealer or the Service Department, please quote the model and serial number of your appliance. This information is given on the data plate. Please note that telephone calls may be monitored and recorded to improve our service.

^ Hang the lower door on hinge pin e and then close the appliance door. ^ Fit lower hinge bracket b in the door bearing bush of the lower door. Then screw it securely to the housing. ^ Refit cover a.
Refitting the handles: Please make sure you follow the instructions below carefully when you refit the handle. The door seal will be damaged if the handle is fitted incorrectly. ^ Slide the side section of the handle d into the guides on the mounting plate until it clicks into place. It is important to check that the side section of the handle d does not come into contact with the door seal when opening the door, as this would damage the door seal permanently. If, after you have refitted the handle, you find that the side section does touch the door seal when the door is opened: ^ Realign mounting plate c with grub screws a until the mounting plate and the side section of the handle d are at the correct angle and the side section does not touch the seal when the door is opened.
^ Loosely attach the handle to the opposite side of the door with the two front screws b. Mounting plate c must be positioned on the side of the door so that when the door is closed it is flush with the side of the appliance. If this is not the case ^ Tighten the two grub screws a with the allen key provided until mounting plate c lines up correctly. ^ Then tighten all 4 fixing screws b.
Building in the appliance
The air inlet and outlet must not be covered or blocked in any way. They should be dusted on a regular basis.
When installed next to a wall c a distance of approx. 50 mm is needed on the hinge side between the wall and the appliance b, so that the doors and the handles have sufficient space for opening.
The appliance can be installed in a kitchen run. To match the height of the rest of the kitchen, the appliance can be fitted with a suitable top box a. A ventilation gap of at least 50 mm depth must be allowed for behind the appliance and top box, if fitted, for air to circulate. A gap of at least 40 mm is required between the top of the appliance (or top box) and the ceiling to ensure that air can circulate without hindrance. Otherwise the appliance has to work harder, resulting in an increase in electricity consumption. The larger the cross-section, the more efficient the appliance.

Alteration rights reserved / 2005

M.-Nr. 900 / 02 en - GB

KTN 4352 SD ed