MULTI GLOSS 268 Plus UNI GLOSS 60Plus

(20, 60, 85) (60)

Maintains data compatibility with previous models while offering high-speed communication via USB and Bluetooth.
Approx. 10,000 are possible measurements with one AA (R6) size alkaline battery.
Large easy to read liquid crystal display. Easy operation with mode scroll wheel.
By operating the mode scroll wheel in accordance with easy-to-understand menu items, you can set a wide array of functions easily.
Wide measurement range that can measure from matte plastic to metal surface with a high gloss finish : 0.0~2,000 GU

(in the case of 20)

Gloss difference measurement of standard/ sample and PASS/FAIL evaluation.
You can perform a pass/fail evaluation by setting the limit value. You can enter the sample name and the standard value name in the measurement result. Sample name
Wide array of display modes (in nine languages)
You can select Mode, Geometry selection, Difference, and Calibration from the Main Menu screen.
Geometric selection selected two angles.

(MULTI GLOSS 268)

PASS/FAIL

Standard value name

Geometric selection selected three angles.
You can measure by selecting Basic mode, Continuous, or Statistics from the Mode screen. You can select the measurement angle from the Geometry selection screen and display two angles or three angles at the same time.

(MULTI GLOSS 268Plus)

Autodiagnosis function for calibration
Reduces needed frequency of calibration and improves long-term stability. In addition, if the calibration is required, the message will be displayed.

Calibrating standard

Protective holder
With dedicated Data transfer software (gloss-link), data management such as data transfer to Excel is easy.

Dimensions

Units : mm

Windows2000/XP/Vista

Microsoft Excel 2000 or higher.
Windowsand Excel is a trademark or registered trademark of Microsoft Corporation of America or its subsidiaries.

Specifications

Measurement geometry Size of measurement spot Standard compliance Measurement range Resolution Repeatability Inter instrument agreement Memory Difference measurement Battery performance Measurement time Auto power off Languages Measurement mode Interface Operating temperature /humidity range Storage temperature /humidity range Power supply Dimensions Weight
MULTI GLOSS 268Plus UNI GLOSS 60Plus 20, 60, 20 : 10 X 10 mm 60 : 9 X 15 mm 60 : 9 X 15 mm 85 : 5 X 38 mm ISO 2813, ISO 7668, ASTM D 523, ASTM D 2457, DIN 67 530, JIS Z 8741, BS 3900, BS 6161(Part 12) 20 : 0.0~2,000 GU 60 : 0.0~1,000 GU 60 : 0.0~1,000 GU 85 : 0.0~160 GU 0.0~99.9 GU : 0.1 GU 100~2,000 GU : 1 GU 0.0~99.9 GU : 0.2 GU 100~2,000 GU : 0.2% of reading 0.0~99.9 GU : 0.5 GU 100~2,000 GU : 0.5% of reading 999 measurements with date and time Memory for 50 standard Approx. 10,000 measurements (when using 1.5 V AA(R6)size alkaline battery) 0.5 seconds 10~99 seconds selectable English, Spanish, German, French, Italian, Japanese, Portuguese, Russian, Polish Normal mode (Sample mode, Statistics, Continuous, Basic mode), Difference mode USB2.0; Bluetooth standard version 2.0* 15 to 40C relative humidity 85% or less (at 35C) with no condensation -10 to 60C relative humidity 85% or less (at 35C) with no condensation 1.5 V AA(R6)size alkaline battery, via USB port 155(W) X 73(H) X 48(D) mm 400 g

Accessories

Model Standard accessories
MULTI GLOSS 268Plus Calibration holder TRI

(High gloss tile)

UNI GLOSS 60Plus Calibration holder 60

Optional accessories

* Applicable Bluetooth profile: Serial Port Profile, Output: Bluetooth Power Class 1 The communication distance may vary depending on the obstacles and radio wave conditions between the devices. Successful wireless communication is not guaranteed with all Bluetooth-ready equipment. Bluetooth is a registered trademark of Bluetooth SIG, Inc. MULTI GLOSS 268 / UNI GLOSS 60 conforms with international specifications ASTM D 523, DIN 67 530, ISO 2813.
USB-cable Carrying case Data transfer software (gloss-link) 1.5 V AA(R6)size alkaline battery Checking standard TRI Checking standard 60 (3 semi gloss tiles 20, 60, 85) (High and semi gloss tile) Checking standard mirror (3 tiles 20, 60, 85)
Certificate No : YKA 0937154 Registration Date : March 3, 1995

Certificate No : JQA-E-80027 Registration Date : March 12, 1997
For correct use and for your safety, be sure to read the instruction manual before using the instrument. Always connect the instrument to the specified power supply voltage. Improper connection may cause a fire or electric shock. Be sure to use the specified batteries. Using improper batteries may cause a fire or electric shock.

SAFETY PRECAUTIONS

Note : The specifications described in this document are subject to change without notice.
2010 KONICA MINOLTA SENSING, INC.

9242-4890-12 BABAPK 1

Printed in Japan

MULTI GLOSS 268 UNI GLOSS 60

(20, 60, 85) (60)

It has data compatibility with the previous MULTI GLOSS 268 / UNI GLOSS 60, and improves repeatability and reproducibility.
Approx. 10,000 measurements are available with one AA(R6)size alkaline battery.
Large screen size and easily viewable liquid crystal display. Easy operation with mode scroll wheel.
By operating the mode scroll wheel in accordance with easy-to-understand menu items, you can set a wide array of functions easily.
Wide measurement range that can be measured from plastic to metal surface with a high gloss finish : 0.0~ 2,000 GU

(in the case of 20)

The gloss difference measurement of the standard/sample and the PASS/FAIL evaluation.
You can make a pass/fail evaluation by setting the limit value. You can enter the sample name and the standard value name in the measurement result. Sample name
A wide array of display modes (corresponding to six languages)
You can select Mode, Geometry selection, Difference, and Calibration from the Main Menu screen.
Geometric selection selected two angles.

(MULTI GLOSS 268)

PASS/FAIL

Standard value name

Geometric selection selected three angles.
You can measure by selecting Basic mode, Continuous, Statistics from the Mode screen. You can select the measurement angle from the Geometry selection screen and display two angles or three angles at the same time.
Autodiagnosis function of calibration
This means a little frequency of calibration and long-term stability. In addition, if the calibration is required, the message will be displayed.

Calibrating standard

Protective holder
With dedicated Data transfer software (gloss-link), the data management such as data transfer to Excel is easy.

Dimensions

Units : mm
Windows98/2000/Me/XP, Windows NT4.0
Microsoft Excel 97 or higher.
Windows, Windows NT and Excel is a trademark or registered trademark of Microsoft Corporation of America or its subsidiaries.

Specifications

Accessories
MULTI GLOSS 268 UNI GLOSS 60 20, 60, 20 : 10 X 10 mm 60 : 9 X 15 mm 60 : 9 X 15 mm 85 : 5 X 38 mm ISO 2813, ISO 7668, ASTM D 523, ASTM D 2457, DIN 67 530, JIS Z 8741, BS 3900, BS 6161(Part 12) 20 : 0.0~2,000 GU 60 : 0.0~1,000 GU 60 : 0.0~1,000 GU 85 : 0.0~160 GU 0.0~99.9 GU : 0.1 GU 100~2,000 GU : 1 GU 0.0~99.9 GU : 0.2 GU 100~2,000 GU : 0.2% of reading 0.0~99.9 GU : 0.5 GU 100~2,000 GU : 0.5% of reading 999 measurements with date and time Memory for 50 standard Approx. 10,000 measurements (when using 1.5 V AA(R6)size alkaline battery) 0.5 seconds (each measurement) Auto : 10~99 seconds select English,Spanish,German,French,Italian,Japanese Normal mode (Sample mode, Statistics, Continuous, Basic mode), Difference mode RS-232C format 15 to 40C relative humidity 85% or less (at 35C) with no condensation -10 to 60C relative humidity 85% or less (at 35C) with no condensation 1.5 V AA(R6)size alkaline battery 155(W) X 73(H) X 48(D) mm 400 g

Model Standard accessories
Measurement geometry Size of measurement spot Standard compliance
MULTI GLOSS 268 Calibration holder TRI

(High gloss tile)

UNI GLOSS 60 Calibration holder 60
Measurement range Resolution Repeatability Inter Instrument agreement Memory Difference measurement Battery performance Measurement time Power OFF Languages Measurement mode Interface Operating temperature /humidity range Storage temperature /humidity range Power supply Dimensions Weight

Optional accessories

PC-cable Carrying case Data transfer software (gloss-link) 1.5 V AA(R6)size alkaline battery Checking standard TRI Checking standard 60 (3 semi gloss tiles 20, 60, 85) (High and semi gloss tile) Checking standard mirror (3 tiles 20, 60, 85) USB-adapter AC adapter
Note : The specifications described in this document are subject to change without notice.
MULTI GLOSS 268 / UNI GLOSS 60 conforms with international specifications ASTM D 523, DIN 67 530, ISO 2813.
Certificate No : YKA 0937154 Registration Date : March 3, 1995
Certificate No : JQA-E-80027 Registration Date : March 12, 1997

SAFETY PRECAUTIONS

For correct use and for your safety, be sure to read the instruction manual before using the instrument. Always connect the instrument to the specified power supply voltage. Improper connection may cause a fire or electric shock. Be sure to use the specified batteries. Using improper batteries may cause a fire or electric shock.
2003 KONICA MINOLTA SENSING, INC.

9242-4890-11 AGMDPK 8

Printed in Japan