#58257 MITSUBISHI LANCER EVOLUTION VI WRC
Scale: 1:10 Category: Electric Chassis Type: TB01
FEATURES: Shaft driven 4WD with TG10 gearboxes, bumper Two driver upper torso figures included New propeller shaft and damper stays with oil filled dampers

PART #

DESCRIPTION
Body Chassis Upper Cover TG10 Front Upright (A1 x1) TG10 Front Wheel Hub (A2, A3, A6, 1 pc.) TG10 Gear Case (A4 & A5, 1 pc.) TG10 Rear Suspension Arm (B1 & B2, 1 pc.) TG10 Body Mount (B3-B12, B16, 1 pc.) TG10 Front Suspension Arm (B13 & B14, 1 pc.) TG10 Steering Arm (C1-C7) TG10 Front Hub Carrier (C8 & C9) TL01/M03 Toe-in Rear Upright (D1-D3) E Parts (E1-E10) TG10 Mini Bumper (F1-F5, 1 pc.) TB-01 G Parts (Gear) G Parts (G1-G6) x1 55T Gear x1 58T Gear x1 61T Gear x1 H Parts (H1-H9) P Parts (P1-P7) CVA Mini Shock Unit 2 W Parts (W1-W3, 2 pcs.) Z Parts (Z1-Z5) Figure Body Propeller Shaft Aluminum Motor Heat Sink Dustproof Sponge (Steering) Dustproof Sponge (Motor) 1/10 Mitsubishi Lanser Evo.6 WRC Wheels (2 pcs.) Rally Block Tires (2 pcs.) Metal Parts Bag A Metal Parts Bag B Metal Parts Bag C Metal Parts Bag D 3x14mm Step Screw (MA1 x5) 3x10mm Tapping Screw (MA2 x10) 2x8mm Countersunk Tapping Screw (MA3 x10) Screw Pin Set (MA4 x2.etc.) Diff. Bevel Gear Set (MA5 x2, MA18 x1, MA19 x2, MA20 x3) 1280 Sealed Ball Bearing (MA6 x3) 1150 Metal Bearing (MA8 x2) 1150 Plastic Bearing (MA9 x10) 3x18mm Threaded Shaft (MA10 x1) Gear Box Joint (MA12 & MA13, 1 pc. each) TG10 Wheel Axle (MA14 x2) 4WD Touring Car Drive Shaft Set (MA15 x2) (50883 Replaces 50650) TGX Bevel Pinion & Ring Gear Set (MA16 & MA17, 1 pc. each) TG10 U-Shaped Shaft (MA21 x1) 4x10mm Step Screw (MB1 x5) 3x10mm Step Screw (MB2 x5) 3x18mm Step Screw (MB3 x2) 3x12mm Countersunk Tapping Screw (MB4 x10) 3mm Washer (MB5 x15) 5x23.5mm Ball Connector (MB6 x2) 5mm Ball Connector (MB7 x10) 3x42mm Threaded Shaft (MB8 x2) 3x12mm, 3x15mm Screw (MB9 x2.etc.) 5mm Adjuster (MB10 x6) 2.6x10mm Tapping Screw (MC1 x5) 3x6mm Screw (MC2 x2) 2x8mm Screw (MC3 x10) 3mm Grub Screw (MC4 x10) Tool Set (Box Wrench, Hex Wrench, MC4 x4) 4mm Flange Lock Nut (MC6 x4) Damper O-ring (MC8 x10, Red) 2x10mm Shaft (MC9 x10)

*1 *1 *1 *1 *1 *1

9415631

50650-D 50597 50594

9495340 1055946
16T, 17T AV Pinion Gear Set (MC10.etc.) *1 Coil Spring (MC11 x2) *2 Damper Shaft (MC12 x1) CVA Mini Shock Unit 2 Oil Seal (MC13 x6) Motor Plate (MC15) Snap Pin Set (MC16 x5, MC17 x10) 2x8mm Tapping Screw (MD3 x10) Velcro Tape (2 pcs.) Sponge Tape 11x114mm Double-Sided Tape (2 pcs.) 3x8mm Countersunk Screw (4 pcs.) Heat Resistant Double-Sided Tape Nylon Band w/Metal Hook (10 pcs.) Ceramic Grease Speed Controller Bag Instructions x1 Resistor x1 Speed Controller x1 Speed Control Rod x1 Switch Lubricant x1 3mm Washer x2 3x10mm Tapping Screw x4 3x8mm Tapping Screw x2 Double-Sided Tape x2 Antenna Pipe (30cm) Motor Sticker (a, b) & Masking Seal Instructions
R/C SPARE PARTS & HOP-UP OPTIONS
18T, 19T AV Pinion Gear Set 20T, 21T AV Pinion Gear Set 22T, 23T AV Pinion Gear Set 24T, 25T AV Pinion Gear Set Hi-Torque Servo Saver 4mm Aluminum Flange Lock Nut (10 pcs.) 3x10mm Titanium Tapping Screw (10 pcs.) Skyline GT-R Universal Shaft Set (2 pcs.) Aluminum King Pins On-Road Tuned Spring Set 4WD Front One-Way Differential Unit 1/10 Touring Car Hard Joint Cup Set (for Gear Diff.) TA03 Super Low Friction Damper Set (4 pcs.) 5mm Aluminum Ball Connector (10 pcs.) Aluminum Servo Stay 3x3mm Spring Set Screw (10 pcs.) TG10 Urethane Bumper TG10 Stabilizer Set TG10 Ball Differential Set TG10 Aluminum Racing Steering Set TG10 Aluminum Gearbox Mount TG10 Hard Aluminum Front Suspension Arm TG10 Hard Aluminum Rear Suspension Arm TG10 Aluminum Rear Upright TG10 Reinforced Propeller Shaft Turnbuckle Tie-Rod Set (TG10, TB-01) Turnbuckle Upper Arm Set (TG10, TB-01) TB-01 Ball Bearing Set

*2 *1 *1 *1 *1 *1

*1 Requires 2 sets for one car. *2 Requires 4 sets for one car. D=discontinued
Tamiya America, Inc. 2 Orion, Aliso Viejo, CA 92656 (949) 362-2240 Fax: (949) 362-2250 Consumers: (800) TAMIYA-A Dealers: (800) 5-TAMIYA

#57706 XB MITSUBISHI LANCER EVOLUTION VI WRC
Scale:1:10 Category: Electric Chassis Type: TL01

Ready to Run

DESCRIPTION Body (Unpainted) TL01 A Parts (Chassis) (A1-A3) TL01 B Parts (Upright) (B1-B14) TL01 C Parts (Sus. Arm) (C1-C20) (2 pcs.) TL01 G Parts (Gear) (G1-G7) G Parts (G1-G3) x1 Counter Gear (G4) Idler Gear (G5) x1 Spur Gear (G6) Diff. Spur Gear (G7) xH Parts (H1-H9) 50732 *1 1/10 10-Spoke One-Piece Wheels (2 pcs.) 50419 *1 Racing Radial Tires (2 pcs.) 9415332 Metal Parts Bag A 9415333 Metal Parts Bag B 9415442 Metal Parts Bag C 9805620 3x25mm Screw (MA1 x2) 50582 3x14mm Step Screw (MA2 x5) 9805662 3x10mm Flange Tapping Screw (MA3 x5) 50577 3x10mm Tapping Screw (MA4 x10) 50575 2.6x10mm Tapping Screw (MA5 x5) 50573 2x8mm Tapping Screw (MA6 x10) 50602 *1 Diff. Bevel Gear Set (MA7 x2, MA16 x2, MA17 x3, MA18 x1) Plastic Bearing (MA8 x10) 3550008 5x30mm Shaft (MA10) 50594 2x10mm Shaft (MA12 x10) 50355 *2 18T, 19T AV Pinion Gear Set (MA13.etc.) 50576 3mm Grub Screw (MA14 x10) 50038 Tool Set (Box Wrench, Hex Wrench, MA14 x4) 4305125 Motor Plate (MA15) Metal Bearing (MA19 x2) 9805567 3x23mm Screw (MB2 x10) 9405830 *1 Screw Pin Bag (MB3 & MB4, 2 pcs. each.etc.) 9805557 4mm Flange Lock Nut (MB5 x4) 9805240 3mm O-ring (Black) (MB6 x7.etc.) 50197 Snap Pin Set (MB7 x5, MB8 x10) 8000072 8x60mm Rubber Tubing (MB9) 9805368 *1 Gear Box Joint (MB10 & MB11, 1 pc. each) 50823 *1 TG10 Wheel Axle (MB12 x2) 50650-D *1 4WD Touring Car Drive Shaft Set (MB13 x2) (50883 Replaces 50650) 9805485 *1 Coil Spring (MB14 x2) 4505172 Speed Controller (MD1) 0445768 Speed Controller Cover (MD2) 5305011 Speed Control Rod (MD3) 7305015 Resistor (MD4) 9805575 3x18mm Tapping Screw (MD5 x2) 9805668 2.6x12mm Tapping Screw (MD6 x4) 9805665 2.6x8mm Tapping Screw (MD7 x2) 3555120 Center Shaft 9805666 Receiver Switch 50171 Heat Resistant Double-Sided Tape 50595 Nylon Band w/Metal Hook (10 pcs.) 87023 Switch Lubricant 87025 Ceramic Grease 7435044 Motor 6095003 Antenna Pipe (30cm) R/C SPARE 50356 **PARTS & HOP-UP OPTIONS 20T, 21T AV Pinion Gear Set 22T, 23T AV Pinion Gear Set Racing Slick Tires (2 pcs.) Rally Block Tires (2 pcs.) CVA Super Mini Shock Unit Set

PART # 50738

1050011
Racing Semi-Slick Tires (2 pcs.) 1150 Sealed Ball Bearing (4 pcs.) 4mm Aluminum Flange Lock Nut (10 pcs.) 1150 Sealed Ball Bearing (2 pcs.) Pin Type Wheel Adapter RS-540 Sport-Tuned Motor Manta Ray Ball Diff. Set 3x10mm Titanium Tapping Screw (10 pcs.) Skyline GT-R Universal Shaft Set (2 pcs.) 4WD Touring & Rally Car Lightweight King Pins Touring & Rally Car Bushing & Ball Connector Set Low Friction Aluminum Damper Set (2 pcs.) (4WD/FWD Touring & Rally Car) 4mm Anodized Aluminum Flange Lock Nuts (Blue) 4mm Anodized Aluminum Flange Lock Nuts (Red) 4mm Anodized Aluminum Flange Lock Nuts (Gold) 4mm Anodized Aluminum Flange Lock Nuts (Black) On-Road Tuned Spring Set (4WD/FWD Touring & Rally Car) 1/10 Touring & Rally Car Shaped Tire Insert (2 pcs.) 1/10 Touring Car Super Grip Radial Tires (2 pcs.) 1/10 Touring Car Hard Joint Cup Set (for Gear Diff.) 1/10 Touring Car Super Slicks (2 pcs.) 1/10 Touring Car M2 Slicks (2 pcs.) 1/10 Touring Car M2 Radial Tires (2 pcs.) 1/10 Touring Car Shaped Tire Insert, Soft (2 pcs.) Dyna-Run Super Touring Motor TA03 Ball Differential Dyna-Run Racing Stock Motor TA03 Super Low Friction Damper Set (4 pcs.) TL01 Ball Bearing Set Reinforced Slicks Type-A (2 pcs.) Reinforced Slicks Type-B (2 pcs.) Tire Inner Foam (4 pcs.) TL01 Turnbuckle Tie-Rod Set TL01 Stainless Steel Suspension Shaft Set TL01 Adjustable Upper Arm Set TL01 Hollow Carbon Gear Shaft TL01 Carbon Propeller Shaft TL01 Stabilizer Set Touring Car Tuned Spring (Short) CA Cement (for Rubber Tires) TL01 Speed-Tuned Gear Set TL01/M03 Toe-in Rear Upright TL01/M03 Quick Release Battery Holder 3x3mm Spring Set Screw (10 pcs.) Aluminum Reinforced Tape Rubber Tire Application Primer Transmitter Antenna Sticker (a, b) & Masking Seal Instructions

*1 Requires 2 sets for one car. *2 Only 19T, 21T and 23T can be used.

D=discontinued

Tamiya America, Inc. 2 Orion, Aliso Viejo, CA 92656 (949) 362-2240 Fax: (949) 362-2250 Consumers: (800) TAMIYA-A Dealers: (800) 5-TAMIYA