Universal Bluetooth Headset H375

& f y r

MOTOMANUAL

Figure 1

Figure 2

Charging Port

Figure 3

Figure 4

Figure 5

English

European Union Directives Conformance Statement
Hereby, Motorola Inc., declares that this H375 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose the product with household waste.
Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems arent available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.

FCC Notice to Users

Users are not permitted to make changes or modify the device in any way. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. See47-CFR-Sec.-15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3).

Before you begin

See gure 1 on page 1.
Take a moment before you get started to familiarize yourself with your new H375 Bluetooth Hands-free Headset. 1. 2. 3. 4. 5. 6. Power button Microphone Call button Indicator light Volume buttons Speaker

Charging your headset

See gure 2 on page 1.
The indicator light turns on when the battery is charging. It may take up to 30 seconds for the indicator light to turn on. When the headsets battery is fully charged (about 3 hours), the indicator light is steadily lit in blue Note: Headset is NOT functional while charging.

Wearing your headset

See gure 3 on page 2.
Your H375 headset is supplied with both round-and-oval shaped earbuds to provide personal choice for maximum comfort. The ear bud is tted onto the end of your headsets earpiece speaker, and placed onto your ear when using your headset. Your headsets performance is greatly dependent upon achieving a good t on your ear. Therefore, we recommend trying all the supplied ear buds with your headset. You can wear your H375 headset on your left of right ear. The headset comes ready for the right ear. Placing the headset on your ear: Placing the headset on the left ear:
see gure 4 on page 2. see gure 5 on page 2.
Changing volume orientation button
You can change the orientation of the volume buttons on your headset. 1. Turn the headset power off 2. Press and hold the Volume button you want to assign as the Volume up button and the Power button to power on the headset. The indicator light ashes 3 times in blue.
Turning headset on and off
To turn your headset on, press and hold the Power button until the indicator light ashes. To turn your headset off, press and hold the Power button until the indicator light ashes rapidly and then turns off.

Pairing your headset

Your phones Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. Please check your phones users guide. Note: The Bluetooth feature remains on until you turn the feature off. Before you can use your headset, you must pair it with your phone. 1. Ensure headset is in pairing mode Power the headset on. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. If the headset does not enter into pairing mode, see Troubleshooting section. 2. Set your phone to look for your headset Perform a device discovery from the phone. For details about device discovery, consult your phones users guide. The phone lists Bluetooth devices it nds. Select Motorola H375 in the list of discovered devices and conrm by following the on-screen prompts. When prompted by the phone, enter the passkey 0000 and conrm. Pairing is successful when the headset indicator ashes purple and blue.

Test and use

Your phone and headset are now paired and ready to make and receive calls. To conrm they are successfully paired and operating properly, place the headset over your ear and make a call from your phone. You will hear ringing from the headset. After you have successfully paired your phone and headset, you do not need to repeat these steps each time you use the headset.
Using your headset: Making & receiving calls
Your headset supports both hands-free and headset proles. Accessing call functions depend upon which prole your phone supports. See your phones users guide for more information. Note: Some features are phone/network dependent. Function Receive a call End a call Reject a call Redial last call Make a voice dial call Mute or un-mute a call Action Tap the Call button Tap the Call button Press and hold either volume button until incoming call stops ringing Press and hold the Call button for at least 2 seconds until you hear a beep Tap the Call button and speak the name after the tone Tap both Volume buttons

Audio tones

Audio tone Ascending tone Descending tone 2 ascending tones Ring tone 2 short tones when pressing volume button High/low tones repeated every 30 seconds No audio indications: deteriorating quality 3 ascending tones 3 descending tones 2 rapid ascending tones 2 rapid descending tones Headset status Powering on Powering off Pairing successful Incoming call Volume at maximum or minimum Low battery Out of range Connected call Ended call Mute enabled Mute disabled

Indicator lights

Checking battery level
To check battery level while headset is powered on, press and hold both Volume buttons for 5 seconds until you hear a beep. The indicator light displays the following charge status for a few seconds. Headset indicator Red Purple Blue Charge level Below 10% charge Between 10% and 80% charge Above 80% charge

Charging status

With charger plugged in Headset indicator Red Purple Blue Charge status Charging (below 10% charge) Charging (above 10% charge) Charging complete

Operating status

With no charger plugged in Headset indicator Off 3 blue ashes Steady blue Rapid blue/purple ashes Quick blue ash Slow blue ash Slow red ash Slow purple ash Quick red ash Headset status Power off Powering on/off Pairing mode Pairing/Connection successful Incoming/outcoming call Connected (on a call) Standby (not on a call) Idle (not connected) Connected (on a muted call) Low battery
Note: After 30 minutes on a call or of inactivity, the light stops ashing to conserve battery power, but the headset remains in standby mode.

Troubleshooting

My headset will not enter pairing mode Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. My phone doesnt nd my headset Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices. My headset worked before but now its not working Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and headset again. If you have any additional questions, please call your hotline number (0870-9010-555) or visit us at www.hellomoto.com.