motorola Portable Bluetooth Hands-Free Speaker

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Take a moment before you get started to familiarize yourself with your new T305 Portable Bluetooth Hands-Free Speaker. Multi-Color Indicator Light and Call Button Volume Up (+) Button (on side) Speaker
Volume Down (-) Button Microphone

Power Button T305

Get connected in 4 quick steps.
CHARGE YOUR HANDS-FREE SPEAKER

START BLUETOOTH FEATURE

Your Phone
Charge your hands-free speaker's battery for 2 hours: Charging Port
Note: Do not place hands-free speaker with clip installed on visor when charging.
Your phone's Bluetooth feature is off by default. To use your hands-free speaker, you must turn on the Bluetooth feature in your phone. For most Motorola phones (at the main menu): 1 Press M (Menu ) > Settings > Connection >
Bluetooth Link > Setup.
1 Plug the Motorola charger into the charging
port on the end of the hands-free speaker. The indicator light turns steadily red when the battery is charging and the hands-free speaker is turned off. It may take up to 1 minute for the indicator light to turn on. When the hands-free speaker's battery is fully charged (about 2 hours), the indicator light turns steadily blue.
2 Scroll to Power. 3 Select Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on until you turn the feature off.
d Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
2 Disconnect the charger.
Note: Hands-free speaker is functional while charging; however, when charging the hands-free speaker while turned on, the indicator light does not provide charging status.

Your Hands-Free Speaker

Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809503A47-A
Before you can use your hands-free speaker, you must pair (link) it with your phone. Step A - ENSURE HANDS-FREE SPEAKER IS IN PAIRING MODE To initiate easy pairing, power on hands-free speaker by pressing and holding the Power button until the indicator light becomes steadily lit in purple. Release the button and, after a few moments, the indicator light will be steadily lit in blue to indicate hands-free speaker is in pairing mode. Indicator Light (steadily blue for pairing mode) If the hands-free speaker does not enter pairing mode, see TROUBLESHOOTING for help.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2006.
Your Phone Step B - SET YOUR PHONE TO LOOK FOR YOUR HANDS-FREE SPEAKER For most Motorola phones:

PAIR CONTINUED

TEST AND USE
Your phone and hands-free speaker are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:
On your Motorola phone, press M (Menu ) >
1 Install visor clip and place hands-free speaker
Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
onto your visor. See "Installing Hands-Free Speaker in Car" on the reverse side of this guide for details. call and press the Send key.
2 On your phone, dial the number you want to 3 If your phone and hands-free speaker are
successfully paired, you will hear ringing on the hands-free speaker.
Select OK or Yes to pair your hands-free

Select Motorola T305.

speaker with your phone. Enter the passkey: 0000 Select OK.
When your hands-free speaker successfully pairs with your phone, the indicator light changes to flashing blue with quick purple flashes.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
After you have successfully paired your phone and hands-free speaker, you don't need to repeat these steps. For daily use, ensure that your hands-free speaker is turned ON and that your phone's Bluetooth feature is ON. To save battery power, your hands-free speaker will power down when not connected to your phone for more than 30 minutes.

USING YOUR T305

See Features and Functions Guide on the reverse side for information on using your T305

TROUBLESHOOTING

My hands-free speaker will not enter pairing mode. Make sure that any devices previously paired with the hands-free speaker are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in blue indicating the hands-free speaker is now in pairing mode. My phone does not find my hands-free speaker. Make sure the indicator light on your hands-free speaker is on and steadily lit in blue when your phone is searching for devices (see step 3). My hands-free speaker worked with my phone before but now they are not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and hands-free speaker again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport

Features and Functions Guide
T305 Portable Bluetooth Hands-Free Speaker
TURNING HANDS-FREE SPEAKER ON AND OFF
To turn hands-free speaker on, press and hold the Power button until the indicator light turns purple. Then, release the button.
Note: Hands-free speaker may take up to 3 to 4 seconds to turn on.
To turn your hands-free speaker off, press and hold the Power button until the indicator light turns purple and then turns off.
IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your T305.
To conserve battery power, your hands-free speaker will turn off when not connected to your phone for more than 30 minutes. Power Button Indicator Light
INSTALLING HANDS-FREE SPEAKER IN YOUR CAR
Follow these steps to install your hands-free speaker in your car:

Continued

2 Slide the visor clip onto your sun visor.
1 Slide the visor clip onto the mounting bracket
on the bottom of the hands-free speaker. To do this, place the loop end first onto the hands-free speaker and slide forward as shown below.
When installed, the Power button must be facing toward you as shown. The visor clip is reversible to allow placement of your hands-free speaker on either the front or the back of your cars sun visor.
ADJUSTING HANDS-FREE SPEAKER VOLUME
You can adjust hands-free speaker volume using the Volume buttons. To adjust volume, tap or press and hold button.
European Union Directives Conformance Statement
Hereby, Motorola declares that this product is in compliance with: The essential requirements and other relevant provisions of Directive 1999/5/EC. All other relevant EU Directives.
Volume Up (+) Button Volume Down (-) Button

Product Approval Number

The above gives an example of a typical Product Approval Number. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your products label in the Search bar on the web site.
Note: Hands-free speaker volume cannot be adjusted during an incoming call.

MAKING CALLS

Function Make a voice dial call Action Tap the Call button and speak the name after the tone Tap the Call button (if a call is on hold, tap twice to end all calls) Tap the Call button Tap either Volume button Press and hold the Call button until you hear a beep

MAKING CALLS CONTINUED

Function Answer a second incoming call Toggle between two active calls Mute or unmute a call Action Press and hold the Call button (places first call on hold) Press and hold the Call button Tap both Volume buttons

End a call

Receive a call Reject a call Redial last call
Note: Some features are phone/network dependent. Note: When turning on your hands-free speaker during a phone call, audio is transferred automatically to your hands-free speaker (when your hands-free speaker and phone have previously been connected, and your phone supports this feature).
Note: Your T305 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.

INDICATOR LIGHTS

With the Charger Plugged In Indicator Light Status
Note: Charging status not displayed when hands-free speaker is in use.

AUDIO TONES

The audio tones provide information about your hands-free speaker status. Audio Tone Single high tone when pressing Volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone (phone dependent) Single high tone Low to high tone Two ascending tones Two descending tones Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute disabled

Steady red Steady blue

Charging Charging complete
With No Charger Plugged In Indicator Light Off Steady purple Steady blue Quick red flash Blue with quick purple flashes Slow blue pulse Blue flash Quick blue flash Slow purple pulse Status Power off Powering up Pairing mode Battery low Pairing successful Connected (on a call) Standby (not on call) Incoming call Muted

Universal Bluetooth Hands-free Speaker T305

MOTOMANUAL

Figure 1

Figure 2

Charging Port

Figure 3

English
General and safety information
European Union Directives Conformance Statement
Hereby, Motorola Inc., declares that this T305 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose the product with household waste. Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems arent available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.

FCC Notice to Users

Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

English anguage

Initial set up
Welcome to the world of Motorola digital wireless communications! We are pleased that you have chosen the Motorola T305 portable Bluetooth Hands-free Speaker.

Before you begin

Take a moment to familiarize yourself with your T305 hands-free speaker.

See figure 1 on page 1.

Speaker Multicolor indicator light and Call Button Volume up (+) button Volume down (-) button Power button Microphone
Charging your hands-free speaker See figure 2 on page 2.
The indicator light turns steadily red when the battery is charging and the hands-free speaker is turned off. It may take up to 1 minute for the indicator light to turn on. When the hands-free speakers battery is fully charged (about 2 hours), the indicator light turns steadily blue. Note: Do not place the hands-free speaker with clip installed on visor while charging. Hands-free speaker is functional while charging. The rechargeable battery that powers this product must be disposed of properly and may need to be recycled. Contact your local recycling center for proper disposal methods. Never dispose of batteries in fire because they may explode.
Installing the hands-free speaker in your car See figure 3 on page 2.
1. Slide the visor clip onto the mounting bracket on the bottom of the handsfree speaker. To do this, place the loop end first onto the hands-free speaker and slide forward. The visor clip is reversible to allow placement of your hands-free speaker on either leading or trailing edge of your cars sun visor. 2. Slide the visor clip on your sun visor. The visor clip is reversible to allow placement of your hands-free speaker either on the front or the back of your cars sun visor. When installed, the Power button must be facing toward you.
Adjusting the hands-free speaker volume
To adjust volume, press and hold either volume button on the side of the hands-free speaker. Note: hands-free speaker volume cannot be adjusted during an incoming call.
Pairing your hands-free speaker and phone
Your phones Bluetooth feature is off by default. Make sure the Bluetooth feature is turned on in your phone before using your hands-free speaker. Please check your phones users guide. Before you can use your hands-free speaker, you must pair (link) it with your phone. 1. Ensure the hands-free speaker is in pairing mode To initiate easy pairing, power on the hands-free speaker by pressing and holding the Power button until the indicator light becomes steadily lit in purple. Then, release the button. After a few moments, the indicator light will be steadily lit in blue to indicate that the hands-free speaker is in pairing mode. If the hands-free speaker does not enter pairing mode, see the Troubleshooting section for help. 5

2. Set your phone to look for your hands-free speaker Perform a device discovery (or scan) from the phone. For details about device discovery, consult your phones users guide. The phone lists Bluetooth devices it finds. Select Motorola T305 in the list of discovered devices and confirm by following the on-screen prompts. When prompted by the phone, enter the passkey 0000 and confirm. When your hands-free speaker successfully pairs with your phone, the indicator light changes to flashing blue with quick purple flashes. After you have successfully paired your phone and the hands-free speaker, you do not need to repeat these steps each time you use the hands-free speaker.

Test and use

Your phone and hands-free speaker are now paired and ready to make and receive calls. To confirm they are successfully paired and operating properly, place the hands-free speaker on your car sun visor and make a call from your phone. You will hear ringing from the hands-free speaker.
Using your hands-free speaker
Turning your hands-free speaker on & off
To turn your hands-free speaker on, press and hold the Power button until the indicator light turns purple. Then, release the button. Note: the hands-free speaker may take up to 3-4 seconds to turn on. To turn your hands-free speaker off, press and hold the Power button until the indicator light turns purple and then turns off. To save battery power, your hands-free speaker will turn off when not connected to your phone for more than 30 minutes.
Making and receiving calls
Your hands-free speaker supports both hands-free and headset profiles. Accessing call functions depend upon which profile your phone supports. See your phones users guide for more information. Note: Some features are phone/network dependent.
Function Receive a call End a call Reject a call Redial last call Make a voice dial call Answer a second incoming call Toggle between two active calls Mute or un-mute a call Action Tap the Call button Tap the Call button If a call is on hold, tap twice to end all calls Tap either volume button Press and hold the Call button until you hear a beep Tap the Call button and speak the name after the tone Press and hold the Call button until you hear a beep (The 1st call is placed on hold) Press and hold the Call button Tap both Volume buttons
Note: when turning on your hands-free speaker during a phone call, audio is transferred automatically to your hands-free speaker (provided that your hands-free speaker and phone have previously been connected and your phone supports this feature). 7

Indicator lights

With the charger plugged in:
Indicator Steady red Steady blue Status Charge in progress Charging complete
Note: Charging status is not displayed when hands-free speaker is in use.

With no charger plugged in:
Indicator Off Steady purple Steady blue Red Blue with rapid purple flashes Slow blue pulse Blue flash Quick blue flash Slow purple pulse Status Power off Powering up Pairing mode Low battery Successful pairing Connected (not on a call) Standby (not on a call) Incoming call Muted

Audio tones

Audio tone Single high tone when pressing volume button 5 rapid high tones repeated every 60 seconds No audio indications: deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone (phone dependent) Single high tone Low to high tone 2 ascending tones 2 descending tones Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute disabled

Troubleshooting

My hands-free speaker will not enter pairing mode: make sure that any devices previously paired with the hands-free speaker are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in blue indicating that the hands-free speaker is now in pairing mode. My phone does not find my hands-free speaker: make sure the indicator light on your hands-free speaker is steadily lit when you phone is searching for devices. My hands-free speaker worked before but now it is not working: Make sure the Bluetooth feature is turned on in your phone. If the Bluetooth feature has been turned off or was turned on temporarily, you may need to restart the Bluetooth feature and pair your phone and hands-free speaker again.
If you have any additional questions, please call your hotline number (0870-9010-555) or visit us at www.motorola.com.

motorola.com

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Ofce. All other product or service names are the property of their respective owners. The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under license. 2007 Motorola, Inc. All rights reserved. 6803578F42 - Printed in the EU.