BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
H350 Bluetooth Handsfree Headset
Get Connected in 4 Quick Steps
1 - CHARGE YOUR HEADSET 2 - PUT HEADSET IN PAIR MODE 3 - PAIR PHONE WITH HEADSET 4 - TEST AND USE
Take a moment before you get started to familiarize yourself with your new H350 Handsfree Headset. Volume Buttons Earhook Blue Indicator Light

Call Button

Microphone

CHARGE YOUR HEADSET

PUT YOUR HEADSET IN PAIRING MODE
Charge your headset's battery for 2 hours:
Before you can use your headset, you must pair (link) it with your phone. Call Button Blue Indicator Light With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit.
Note: The blue light will flash as you press and hold the Call button. Continue holding down the Call button until the blue light is steadily lit. Note: If you let go of the Call button before the blue light is on and steady, ensure that your headset is off before trying again. Note: To turn off headset, see "Turning Headset On/Off" on the reverse side of this guide.
1 Plug the Motorola charger into the end of
the headset. The blue indicator light turns on when the battery is charging. It may take up to 1 minute for the light to turn on. When the headset's battery is fully charged (about 2 hours), the blue indicator light turns off.
2 Unplug the charger from the headset.
Note: Headset is not functional while charging.

TROUBLESHOOTING

My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 2). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 3). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 3). If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809501A24-A
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2006.
TURN ON BLUETOOTH ON YOUR PHONE AND PAIR WITH HEADSET

Continued

Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. To turn on Bluetooth: 1 Select M (Menu ) > Settings > Connection >
7 Select [Look for Devices].
Note: Do not select STOP--you will automatically be taken to the next screen.
Bluetooth Link > Setup.
8 Select Motorola H350. 9 Select Yes to bond. 10 Enter the passkey 0000 and select OK.
When your headset and phone are successfully paired, the blue light on your headset will change from steadily lit to flashing.
Note: This procedure is for most Motorola phones. For other phones, see your phone's user's guide or visit www.hellomoto.com/bluetoothsupport and click Set Up My New Product.

2 Scroll to Power. 3 Press Change. 4 Select On. 5 Select Back. 6 Select Handsfree.

TEST AND USE

USING YOUR H350
Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:
1 Place the headset over your ear. See "Wearing
the Headset" on the reverse side of this guide. call and press the Send key.
See Features and Functions Guide on the reverse side of this guide for information on using your H350.
2 On your phone, dial the number you want to 3 If your phone and headset are successfully
paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.
Features and Functions Guide

TURNING HEADSET ON/OFF

To turn your headset on, press and hold the Call button until the indicator light flashes. Then, release the button.
Note: Headset may take up to 4 to 5 seconds to turn on.
To turn your headset off, press and hold the Call button until the indicator light flashes rapidly and then turns off.
IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H350.

WEARING THE HEADSET

1 Open the earhook. 2 Loop the earhook over your ear. 3 Press the headset to your ear.
CHANGING FOR USE ON OTHER EAR
You can wear your H350 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:

1 Open the earhook 90

degrees from the headset.
2 Gently lift and pull the
top of the earhook up and off the upper hinge pin. Then, pull it away to remove it.
1 Open Earhook 2 Pull Earhook Up
3 Flip the headset over. 4 Hook the bottom of 3 4
the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.

Hinge Pin

CHANGING VOLUME BUTTON ORIENTATION
If you change your headset to wear on the other ear, you can also change the orientation of the volume buttons.
1 Turn the headset power off. 2 Press the Call button along with the
Volume button you want to assign as "volume up" button until the indicator light flashes twice. The headset power turns on. Call Button

Volume Buttons

MAKING CALLS
Function Make a voice dial call Action Tap the Call button and speak the name after the tone Tap the Call button Tap the Call button Press and hold the Call button until you hear a beep Press and hold the Call button until you hear a beep Press and hold the Call button (places first call on hold)

MAKING CALLS CONTINUED

Function Toggle between two active calls Join a 3-way call Put an active call on hold or resume a call on hold Transfer a call from the phone to the headset Disable or enable the indicator light Action Press and hold the Call button Press and hold both Volume buttons Press and hold the Call button until you hear a beep Tap the Call button Press and hold both Volume buttons for 3 to 4 seconds Tap both Volume buttons
End a call Receive a call Reject a call

Redial last call

Answer a second incoming call

Mute or unmute a call

Note: Your H350 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.
Note: Some features are phone/network dependent.

INDICATOR LIGHTS

The indicator light provides information about your headset status. With the Charger Plugged In Headset Indicator Headset Status On (steady) Charging Off Charging complete With No Charger Plugged In Headset Indicator Off On (steady) 10 rapid flashes Slow pulse Quick flash Headset Status Power off Pairing mode Pairing successful Connected (on a call) Standby (not on call)

AUDIO TONES

The audio tones provide information about your headset status. Audio Tone Single high tone when pressing volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two ascending tones Two descending tones Headset Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute disabled
Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.