BEFORE YO

Before using this product, read the Important Safety and Leg
Take a moment before you get started to famili Bluetooth Handsfree Headset. Along with yo for both charging and storage.

motorola H690

Speaker
Volume Buttons Charging Contacts (on reverse side)

Quick Start Guide

Power Switch

Call Button

Indicator Light

Microphone

U BEGIN
egal Information pamphlet and follow its instructions.

speaker.

Your Hea
iarize yourself with your new H690 ur headset, a desktop charger is provided
Note: You can only charge You cannot plug a Motorol
1 Remove plastic seal off of ear cushion on 2 Plug the Motorola charger into the port on the

desktop charger.

Charging Contacts
3 Place headset onto desktop charger, as shown.
Make sure charging contacts on the headset and desktop charger connect.

Charger Port

START HERE >
Note: Earhook must be rotated to the orientation show above to ensure charging contacts connect.

adset's Battery

the headset from the desktop charger. la charger directly into the headset.

START BLUETOOTH FEATURE

Your Phone
When placing the headset on the desktop charger, the indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2.5 hours), the indicator light turns green.
Note: Headset is not functional while charging. Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the rechargeable battery is approximately 400 charges.
Your phone's Bluetooth feature is off by default. To use your headset, turn on the Bluetooth feature in your phone. For most Motorola phones (from home screen): 1 Press M (Menu ) > Settings > Connection >
Bluetooth Link > Setup.
2 Scroll to Power. 3 Select Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on until you turn it off.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.motorola.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809521A35-B

Bluetooth QD ID: B013132

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. 2008 Motorola, Inc. All rights reserved.
Your Headset Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones:
Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Remove headset from desktop charger and power on by sliding Power switch to the On position (towards Power symbol on headset). The indicator light first flashes during power up, then initiates easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.
1 On your Motorola phone, press M (Menu ) >
Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2 Select Motorola H690. 3 Select OK or Yes to pair your headset with 4 5
your phone. Enter the passkey: 0000 (for most phones) Select OK. When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue and purple.

Indicator Light (steadily blue for pairing mode) If the headset does not enter pairing mode, see TROUBLESHOOTING for help.

TEST AND USE

USING YOUR H690
See Features and Functions Guide on the reverse side for information on using your H690
Your phone and headset are now paired and ready to make and receive calls. To make a call:
1 Place the headset over your ear. See
"Wearing the Headset" on the reverse side of this guide.
2 On the phone, dial the number you want to
call and press SEND key on your phone. If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, make sure your headset is turned ON and your phone's Bluetooth feature is ON.

TROUBLESHOOTING

My headset will not charge. Make sure your earhook and ear cushions are properly orientated. See step 1 and Ear Cushions and Your Headset to see proper orientation. My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. My phone doesnt find my headset. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now its not working. Make sure your phone is on, and the Bluetooth feature is turned on in your phone (see step 2). If Bluetooth was turned off or was turned on only temporarily, you may need to restart it (see step 2) and pair your phone and headset again (see step 3).
Features and Functions Guide

TURNING H690 ON AND OFF

To turn ON your H690, slide the Power switch towards the power symbol, as shown below. The indicator light first flashes blue for several seconds, then: flashes blue (if paired and connected with another device) becomes steadily blue (if ready to be paired) To turn OFF your H690, slide the Power switch away from the power symbol. The indicator light will turn off.
IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H690.

EAR CUSHIONS AN

Your H690 headset is supplied with multiple ear cushions. Your headsets performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied ear cushions with your headset. The ear cushion is fitted onto the end of your headsets earpiece speaker like shown, and placed onto your ear when using your headset.

ND YOUR HEADSET

When fitting an oval-shaped ear cushion on your headset, be sure the cushion is pointing towards the microphone, as shown below.

WEARING THE HEADSET

To wear your headset, flex the earhook and loop it over your ear as shown.
CHANGING FOR USE ON OTHER EAR
You can wear your H690 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:
1 Gently lift and pull the
top of the earhook up and off speaker stem, as shown.
2 Flip the headset over. 3 Attach the earhook to
the speaker stem, as shown. Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort.

CHECKING BATTERY LEVEL

While your headset is turned on and not on a call, you can check the battery charge level by pressing and holding both Volume buttons.
Note: This feature does not work when headset is in pairing mode.
European Union Directives Conformance Statement
Hereby, Motorola declares that this product is in compliance with: The essential requirements and other relevant provisions of Directive 1999/5/EC. All other relevant EU Directives.
The indicator light displays charge status until you release the buttons. See Indicator Light for details on indicator light and charge status.

Product Approval Number

The above gives an example of a typical Product Approval Number. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your products label in the Search bar on the web site.

MAKING CALLS

Function Receive a call Mute or unmute a call Reject a call Action Tap the Call button Tap both Volume buttons Press and hold a Volume button until you hear two descending tones Tap the Call button Press and hold the Call button until you hear two ascending tones Tap the Call button and speak the name after the tone

MAKING CALLS CONTINUED

Function Answer a second incoming call End an active call and resume a call on hold Reject a second incoming call Action Press and hold Call button Tap the Call button Press and hold either Volume button until you hear an audio tone

End a call Redial last call
Note: Some features are phone/network dependent.

Make a voice dial call

Note: Your H690 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.

INDICATOR LIGHT

With the Charger Plugged In Headset Indicator Headset Status Red Charging (battery level less than 80% charge) Yellow Charging (battery level more than 80% charge) Green Charging complete None Not charging* When Checking Battery Level Headset Indicator Green Yellow Red Available Talk Time Up to 5.5 hours 30 minutes to 5 hours Less than 30 minutes
With No Charger Plugged In Headset Indicator Off Three blue flashes Steady blue Rapid blue/purple flashes Quick blue flash Slow blue pulse Slow blue flash Slow red flash Slow purple pulse Quick red flash Headset Status Power off Powering on/off Pairing mode Connection successful Incoming/outgoing call Connected (on a call) Standby (not on a call) Idle (not connected to phone) Connected call muted Low battery
Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on. Note: To disable the indicator light, slide Power switch off, then press and hold both Volume buttons AND slide Power switch on (to turn headset on).
*See charging guidelines in the Legal and Safety pamphlet, and remove the charger from the desktop charger and plug in again.

AUDIO TONES

Audio Tone Ring tone Single high tone High to low tone Single high tone when pressing volume button during a call Ascending tone Low tone (repeated every 15 seconds) Descending tone Low to high tone Headset Status Incoming call Phone network not available End call Volume at minimum or maximum Mute enabled Mute reminder
No audio indications; deteriorating quality Two tones repeated every 30 sec.
Mute disabled Connection confirmation/voice activation Out of range Low battery

Actual Size

motorola
The new Motorola H690 uses cutting edge technology to deliver outstanding performance. With dual microphone noise cancellation, the H690 delivers maximum audio performance including echo cancellation. Take advantage of other helpful features like voice dialing, EasyPair technology and universal compatibility. The H690 also features TrueComfort design and a simple LED battery level check.

Model #

Design Accents
Spun button, black gloss finish and chrome trim
Black soft feel paint with spun accents
Black gloss finish and silver accents
Black and silver painted finish
Power Switch Noise Reduction EasyPair Speaker Ear Hooks
Dedicated on/off button Dual microphone Yes Ear bud Flexible, rotating ear hook, can be worn on either ear Quick battery check shines green, yellow or red for remaining talk time 42 x 18 x 12 mm (1.65 x 0.71 x 0.47 inches) 12 g (0.42 oz) Up to 5.5 hrs/up to 8 days
Flip boom RapidConnect Single microphone Yes Ear speaker Ear hook can be worn on either ear Quick battery check shines green, yellow or red for remaining talk time 43 x 27 x 17 mm (1.69 x 1.06 x 0.67 inches) 14 g (0.49 oz) Up to 6.5 hrs/up to 8 days
Dedicated on/off button N/A Yes Ear bud Flexible, rotating ear hook, can be worn on either ear Blue LED light to notify when the headset is in use 62 x 24 x 19 mm (2.44 x 0.94 x 0.75 inches) 16 g (0.56 oz) Up to 8 hrs/up to 8 days
Multifunction sliding switch N/A Yes Elevated ear speaker Multiple ear hooks, can be worn on either ear Blue LED light to notify when the headset is in use 62 x 24 x 19 mm (2.44 x 0.94 x 0.75 inches) 16 g (0.56 oz) Up to 8 hrs/up to 8 days Version 1.2, 2.0 $59.99
LED Light Size Weight Talk/Standby Time
Bluetooth Version Version 1.1, 1.2, 2.0 with EDR Version 1.1, 1.2, 2.0 with EDR Version 1.1, 1.2, 2.0 MSRP $79.99 $99.99 $69.99
The H690 is for existing Bluetooth enabled headset users who are looking for the newest technology in a practical headset. These technophiles are looking for outstanding performance combined with small size and sleek design.

motorola.ca/H690

Rotating ear hook
FAQs How does dual microphone noise cancellation work?
Ear bud with external speaker Call button Dual microphone noise cancellation reduces background noise, elevating the voice for clear conversations. The second microphone picks up the environmental sounds, which are then reduced so your voice is clear.
On/off button LED battery level indicator
What is Motorolas exclusive TrueComfort design?
Ear bud cushion Dual microphones Charging contacts TrueComfort is the result of an intensive data-driven measurement study of the human ear. The new ear hook and molded speaker design are based on laser-accurate global measurements. Multiple ear bud cushion options help customize fit.
Model # Noise Reduction Speaker/Ear hooks

Motorola

H690 Dual microphone TrueComfort ear bud design with flexible, rotating ear hook
BH600 Single microphone Elevated ear speaker with flexible ear hook 58 x 22 x 19 mm (2.28 x 0.87 x 0.75 inches) 17 g (0.63 oz) Up to 7 hrs/220 hrs
BT5010 Single microphone Elevated ear speaker with ear hook 61 x 22 x 13 mm 2.40 x 0.87 x 0.51 inches 20 g (0.71 oz) 10 hrs/300 hrs
Jawbone Dual microphone Elevated ear speaker with multiple ear hooks 58 x 22 x 24 mm 2.28 x 0.87 x 0.98 inches 14 g (0.49 oz) Up to 6 hrs/over 5 days

Blue Ant

Z9 Dual microphone Ear bud with ear hook
42 x 18 x 12 mm (1.65 x 0.71 x 0.47 inches) 12 g (0.42 oz) Up to 5.5 hrs/ Up to 8 days Spun button, black gloss finish and chrome trim
40 x 1.7 x 11 mm 1.61 x 0.07 x 0.43 inches 11 g (0.39 oz) Up to 5.5 hrs/over 8 days

Weight Talk/Standby Time

Black plastic finish with color plastic insert
Black plastic with slider boom arm
Black gloss finish with perforations
Black metallic finish with chrome accent
Information obtained from competitive intelligence & manufacturers web sites in April 2007.
Retail Kit Number: 23072N Retail Kit Includes: Motorola H690 Charger with Adapter 2 Ear Bud Cushions Quick Start Guide
Bulk Part Number: SJ0838 MSRP: $79.99 Weight: 12 g (0.42 oz) Dimensions: 42 x 18 x 12 mm (1.65 x 0.71 x 0.47 inches)
Talk Time: Up to 5.5 hours Standby Time: Up to 8 days Range: Up to 10m (Up to 33 feet) Available: Expected Q2 2008

Universal Compatibility

Tested to work with over 200 compatible Bluetooth enabled phones from more than 15 brands such as Motorola, Nokia, Samsung, Sony-Ericsson and LG. *This device supports Bluetooth hands-free and headset profiles. The experience icons identify devices that utilize the same profile(s), helping to ensure basic compatibility between such devices. However, certain advanced Bluetooth features, including those listed, may not be supported by all devices featuring such icons, and/or the functionality of such features may be limited in certain devices, or by certain wireless carriers. Contact your wireless carrier about feature availability and functionality, or visit www.motorola.ca/bluetooth for more details. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2009. All rights reserved. BIM-2569