Quick Start Guide
HF800/820 Bluetooth Handsfree Device
Get Connected in 5 Quick Steps
1 - CHARGE 2 - POWER ON 3 - START BLUETOOTH 4 - PAIR 5 - TEST AND USE

CHARGE

Your Handsfree Device
Before using this product, read the Important Safety and Legal Information included in your phone's user's guide, and follow its instructions.
Before you get started, charge your handsfree device for 2 hours:
1 Plug the Motorola charger into the back of the
device with the release tab facing up. The Mute LED indicator turns on when the device is charging. It may take up to 1 minute for the LED to turn on. When the device is fully charged (about 2 hours), the Mute LED indicator turns off.
2 Disconnect the charger.

POWER ON

START BLUETOOTH FEATURE

Your Phone

Next, turn on your handsfree device power:
Call Button LED Mute Button LED Volume/Power Button Speaker
Your phone's Bluetooth feature is off by default. To use your handsfree device, the Bluetooth feature must be turned on in your phone. For most Motorola phones: 1 Select (Menu ) > Settings > Connection >
Bluetooth Link > Setup.
2 Scroll to Power. 3 Select Change. 4 Scroll to On. 5 Press Select to turn on Bluetooth. Bluetooth
remains on until you turn the feature off.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
Press the Volume/Power button in. The Call button LED indicator flashes when the power is on.
Support. If you need more help, contact us at 1-877-MOTOBLU. Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809492A68-O
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2005.
Before you can use your handsfree device, you must pair (link) it with your phone. Step A - PUT THE HANDSFREE DEVICE IN PAIRING MODE Call Button LED

Volume/Power Button

1 Press and quickly release the Volume/Power
button. The Call button LED indicator turns on and remains steadily lit.
2 If the Call button LED indicator is flashing or
does not remain steadily lit, repeat these steps.

PAIR CONTINUED

TEST AND USE
Step B - SET THE PHONE TO LOOK FOR YOUR HANDSFREE DEVICE For most Motorola phones:
1 On your Motorola phone, select M (Menu ) >
Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
The phone lists all Bluetooth devices it finds.
Your phone and handsfree device are now paired and ready to make and receive calls. To confirm they are successfully paired and operating properly, make a call:
1 On your phone, dial the number you want to call. 2 Press Send to make the call. If your phone and

handsfree device are successfully paired, you will hear ringing. After you have successfully paired your phone and handsfree device, you do not need to repeat these steps.
2 Select Motorola HF800 or HF820. 3 Select OK or Yes to pair (bond) the device. 4 Enter the passkey: Select OK.
When pairing is successful, the Call button LED changes from steadily lit to flashing.

QUICK TIPS

To answer or end a call, press the Call E button on the handsfree device. To adjust the volume, scroll the Volume button up or down. To mute a call, press the Mute button. To turn off the handsfree device, press and hold the Volume/Power button for 2 to 3 seconds until the Call button LED turns off. A tone sounds as the device turns off. To conserve battery power, turn off the handsfree device when you will not be using it for an extended time. To use the holster as a stand, press and hold the top of the clip in until it opens completely. Then, slide the square tab in the center of the clip up until it snaps into place. You can now stand the handsfree device upright on a flat surface.

TROUBLESHOOTING

My phone does not find my device. Make sure your handsfree device is in pairing mode before looking for devices on your phone (see step 4). My device worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 3). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 3) and pair your phone and handsfree device again (see step 4).
FOR DETAILS ABOUT YOUR HANDSFREE DEVICE See the Users Guide or visit us at www.hellomoto.com/bluetooth and click Support.

Guide de dmarrage rapide

Dispositif mains libres BluetoothMD HF800/820
Connectez-vous en 5 tapes faciles
1 CHARGEZ 2 ALLUMEZ 3 DMARREZ BLUETOOTH 4 APPARIEZ 5 TESTEZ ET UTILISEZ

CHARGEZ

votre dispositif mains libres
Avant dutiliser ce produit, veuillez lire et suivre les directives de la section Consignes de scurit et information juridique du guide de lutilisateur de votre tlphone.
Avant de lutiliser, chargez votre dispositif mains libres pendant 2 heures :
1 Connectez le chargeur Motorola larrire du
dispositif, la patte de dclenchement vers le haut. Une minute environ aprs le dbut du chargement, lindicateur DEL de sourdine sallumera. Cet indicateur steindra lorsque le dispositif sera charg pleine capacit (aprs environ 2 heures).

2 Dbranchez le chargeur.

ALLUMEZ
DMARREZ LA FONCTION BLUETOOTH
Mettez ensuite votre dispositif mains libres sous tension :
DEL de touche de sourdine Touche Volume/ Alimentation DEL de touche dappel Haut-parleur
Votre tlphone La fonction Bluetooth de votre tlphone est dsactive par dfaut; pour pouvoir utiliser votre dispositif mains libres, vous devez lactiver sur votre tlphone. 1 Slectionnez (Menu ) > Rglages > Connexion >