BEFORE YOU BEGIN

HS805 Bluetooth Handsfree Headset
Get Connected in 4 Quick Steps
1 - BATTERY 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - TEST AND USE
For help, contact us at 1- 877-MOTOBLU or visit us at www.hellomoto.com Before using this product, read the Important Safety and Legal Information included in your phone's user's guide, and follow its instructions.

BATTERY

Your HS805 Headset

START BLUETOOTH FEATURE

Your Headset
Insert a new battery into your headset:
Your Phone Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones: (Menu 1 Press M( ) > Settings > Connection >
Before you can use your headset, you must pair (link) it with your phone. Step A - PUT THE HEADSET IN PAIRING MODE Indicator Light
Take a moment before you get started to familiarize yourself with your new HS805 Headset. Call Button Volume Buttons
Bluetooth Link > Setup.
2 Scroll to Power. 1 Open the battery door at the back of the headset. 2 Insert a new battery so the + and markings match the markings in the battery compartment.
3 Select Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on until you turn the feature off.
1 Ensure the headset is turned off (indicator

light not blinking).

2 Press and hold the Call E button for 6 to 10

Indicator Light

3 Close the battery door.
seconds. The indicator light will initially flash, but continue to hold down the button until the indicator light is steadily lit.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
If the indicator light is flashing or not steadily lit when releasing the button, repeat both steps 1 and 2 on this page.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Guide Number: 6809492A70-A

PAIR CONTINUED

Your Phone

TEST AND USE

QUICK TIPS
To turn on the headset, press and hold the Call E button on your headset until the LED indicator begins flashing. The indicator light blinks when the power is on. To answer or end a call, press the Call E button on the headset. To adjust the volume, press the Volume buttons on the headset. NOTE: The Volume buttons are initially set up for wearing your headset on your right ear (like shown in step 3)--with the top button used to increase volume. You can set which button is used to increase volume by pressing and holding the desired Volume button (along with the Call E button) while turning on the headset. To turn off the headset, press and hold the Call E button on your headset for 5 seconds. The indicator light will flash rapidly and then stop flashing.

TROUBLESHOOTING

My phone doesn't find my headset. Make sure the indicator light on your headset is on and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1- 877-MOTOBLU. FOR DETAILS ABOUT YOUR HANDSFREE DEVICE See the users guide or visit us at www.hellomoto.com/bluetooth and click Support.

Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: (Menu 1 On your Motorola phone, press M( ) >
Your phone and headset are now paired and ready to make and receive calls. To make a call:
Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
1 Place the headset over your ear. 2 On your phone, dial the number you want
to call and press the SEND key.
The phone lists Bluetooth devices it finds.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2005.
your phone. 4 Enter the passkey: Select OK.
2 Select Motorola HS805. 3 Select OK or Yes to pair your headset with
3 If your phone and headset are successfully
After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time.
paired, you will hear ringing on the headset.
When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing.

HS805/HS820 Headsets

Bluetooth Wireless Headset Quick Start Guide
Charge Your Headset For 2 Hours (HS820 Only).

Release tab down

Insert a Fresh Battery in your Headset (HS805 Only).
Turn On Your Phones Bluetooth Feature.
Pair Your HS805/HS820 Headset and Phone.

3 Continued.

Find this feature on your Motorola phone: M> Settings > Connection > Bluetooth Link > Handsfree > Look for devices 4. Select Motorola HS805 or HS820 from the list of Bluetooth devices. 5. Select YES to bond with the Motorola HS805 or HS820. 6. Enter the passkey 0000 on the phone. Select OK. 7. The LED indicator flashes rapidly when pairing is completed.
Turn Your Headset On or Off
To turn your headset on, press and hold the MFB for 3 seconds until LED flashes rapidly. To turn your headset off, press and hold the MFB for 3 seconds until the headset flashes rapidly and then turns off.
Before you can use your Bluetooth headset you must:
1. Charge your headset for 2 hours (HS820 Only). 2. Turn on your phone's Bluetooth feature. 3. Pair your headset and phone.
Bluetooth power option is OFF by default. Bluetooth power option must be ON to search for devices. 1. Open the battery door at the back of the headset. 2. Insert a new battery so the + and markings match the ones in the battery compartment.
3. Close the battery door.
You must electronically pair your headset and your Bluetooth enabled (S) phone before you can make a call.
Get more information about using your headset from the user's guide we've provided.

Please read this first!

6809492A70-O
Find this feature on your Motorola phone: M > Settings > Connection > Bluetooth Link > Setup > Scroll to Power. Select Change. Scroll to On. Press Select. For other phones, please refer to your phones users guide.
Indicator LED 1. With your headset turned OFF, press and hold the MFB button until the indicator LED turns on and remains on (about 5 seconds).
1. Plug the Motorola phone charger into the back of the headset, with the charger's release tab facing down and the headset facing up. The indicator LED turns on. 2. When your headset fully charges (about 2 hours) the indicator LED turns off.

Indicator LED MFB

If you need more help with this headset, Contact us at 1-877-MOTOBLU (1-877-668-6258) or go to www.hellomoto.com/bluetooth and click on "Support"
2. Perform a device discovery from your Motorola phone:

Indicator LED

Casque HS805/HS820
Guide de dmarrage rapide pour casque sans fil Bluetooth
Charger le casque pendant 2 heures (HS820 uniquement)
Loquet de dclenchement vers le bas
Installer une pile charge dans le casque (HS805 uniquement)
Activer la fonction Bluetooth de votre tlphone.
Apparier le casque HS805/HS820 et le tlphone.

3 (Suite)

Trouvez cette fonction dans le menu de votre tlphone Motorola : M> Rglages > Connexion > Lien Bluetooth > Mains libres > Chercher des dispositifs 4. Slectionnez Motorola HS805 ou HS820 dans la liste des dispositifs Bluetooth. 5. Slectionnez OUI pour connecter le casque au Motorola HS805 ou HS820. 6. Entrez le mot de passe 0000 au clavier du tlphone. Slectionnez OK. 7. Lappariement est russi lorsque lindicateur DEL clignote rapidement.
Mettre votre casque sous tension ou hors tension
Pour mettre votre casque sous tension, tenez la touche multifonction enfonce pendant 3 secondes, jusqu ce que lindicateur DEL clignote rapidement. Pour mettre votre casque hors tension, tenez la touche multifonction enfonce pendant 3 secondes, jusqu ce que lindicateur DEL clignote rapidement et steigne.

Touche multifonction

Pour plus dinformation sur lutilisation de votre casque, consultez le guide de lutilisateur fourni.
Avant dutiliser votre casque Bluetooth, vous devez :
1. Charger le casque pendant 2 heures (HS820 uniquement). 2. Activer la fonction Bluetooth de votre tlphone.

lire avant lutilisation!

1. Branchez le chargeur de tlphone Motorola larrire du casque, en plaant le loquet de dclenchement du chargeur vers le bas et le casque vers le haut. Lindicateur DEL sallume. 2. Lorsque le casque est charg pleine capacit (aprs environ 2 heures), lindicateur DEL steint.